Wreath of branches of ate. We replace the branches of the Mishur. How this is done or a small master class

10.10.2019

You can, of course, buy New Year's decorations in the store. But to create a festive mood, it is not bad to make at least one new year decoration with your own hands.

For example, a fabulous christmas wreath. Such wreaths can be decorated with all the doors in the apartment, and even the entrance. Then the festive mood will start right on the threshold of the house.

I give your attention two options for master classes for the manufacture of a classic Christmas wreath (photo from the Internet)

It took the branches of juniper, Rhododendron, Pine and Tui. Of course, it is possible to replace with any other coniferous legs (from branches of ate, cypress, fir, flexible rods or artificial spruce branches). Instead of a coniferous pleasure, you can use twigs of evergreen plants: laurel, holly (ostolist), ivy.

The main thing is that they were quite a large amount to make this beauty:

In order to make such a wreath you need:

Ceattor

Gloves

Wire

Coniferous branches

Threads, Lesk

Perhaps - liquid nails that can be bought in the building store

Wreather decoration

We make the wirestore wreath, as shown above. The basis for a christmas wreath will serve a durable and thick wire. Its length depends on the desired wreath diameter. To attach branches and decorations to it, use a thin wire. In the flower store should be sold green wire - it will be not as noticeable against the background of plants.

First take a thick wire and make a carcass in the form of a circle (if the wire is not thick enough, you can make more than one turn).

!!! To save moisture, so that the wreath holds as longer as possible, it is better to wind the wire frame with thin strips of the foam rubber, fixing the tips with a strip with a fishing line or thin wire.

Cut the coniferous twigs so that they are in length no more than 25 cm,

tie them into small bundles and start torsion them in a circle in one direction.

So that the branches do not fall out, immediately fasten them with a thin wire or using a green thread (if a foam rubber is used for moisture, then it is necessary that the ends of the beams are hidden into the foam rubber).

Then attach the remaining beams along the entire length of the wreath (a mustache, so that the magnificent part of each branch covers the wood of the previous one and the place of fastening to the frame). Watch that the wire frame and connecting wire are not visible. If the ready wreath is a wreath or irregularities, disguise them with small twigs, which are woven into spaces with a thin wire: take a few twigs, wrap their ends with a stronger, fasten the wire, remove the free end down and stick a bundle in a wreath to cover Not closed cheese.

If you want to make a more magnificent wreath, the second layer is crowded in the opposite direction. The number of layers depends on the desired pomp wreath.

When the wreath is quite voluminous or lush, start it decorate.

How to decorate a christmas wreath?

Decorating wreath using your fantasy. A fairly wide choice. Beautifully christmas wreath, made in one color range - red, green, blue, white, golden or silver. Traditional Christmas combination - red or green color, very harmony blue and silver. Also, the traditional Christmas wreath decoration is bows and ribbons. A red ribbon or bow is considered to be a classic, but you can use ribbons and bows of other colors from different fabrics.

Usually, the decoration starts with a tape. It is soaked in a wreath, artistically laying the folds and fixing, for example, liquid nails (or over the entire length wreathe a wreath with a transparent fishing line or by kapron threads to secure the design): We glue the edge of the ribbon on the back of the wreath and wait for it to froze.

After that, turning the ribbon between spruce sprigs. When you wrap a ribbon wreath be careful not to take the branch - the ribbon must lie freely, but not hang out. In any place wreath you can make a big and lush bow, which in itself will be the center of the composition.

If you do not like the tape - take the electric garland. Included, it will look very impressive! .
You can then decorate a wreath with one decorative element (for example, a floral composition) or to arrange the decorations evenly throughout the surface of the wreath, securing them with wire (liquid nails)
You can decorate a wreath with small christmas toys, alive or artificial berries, flowers and cones. Beautifully look at the bumps, painted with gold or silver paint.

It looks great in a Christmas wreath, decorated with rods with rowan berries or viburnum, rosehip or dried twigs of other berries. If there are no branches with berries, use red beads, attaching them to the twigs with wire.

Very popular "edible" decorations for a wreath - candy, cookies, fruits, vegetables, nuts. Try to use walnuts, chestnut fruits, red pepper pods, garlic heads or small bulbs.

Or fruits: dried oranges chopped with circles, twisted orange peel, lemons, cinnamon sticks or small fresh apples, tangerines;
Also for the decoration of a Christmas wreath you can use cones, candy, nuts wrapped in foil or painted silver paint.

How to make "snow"

So that your new year decoration was even more attractive, fir branches can be decorated with "snow".

To do this, lower these twigs into a hot saturated salt solution for 5-6 hours, then carefully remove and dry. All, snow, or frost on your christmas wreath ready!

And it is possible to paint with silvery and golden sparkles with a typical nail polish with silver and gold spars.

Well, of course, you can apply artificial snow (aerosol from the store)

In order for the wreath for a long time, it was fresh, did not fade, periodically wipe the foam rubber from the pulverizer with water.

A ready Christmas wreath can be hanging at the front door, the wall or put on the table. If the wreath is located horizontally, you can decorate it with candles. To strengthen the candles on a wreath, two heated wires stuck perpendicular to their base. Candles Insert in the wreath and tighten the wire from below. Place them at equal distances from each other, forming a square. Next to the candles will look a bump. Candles should be high enough so that the wreath does not catch fire. And the last barcode is artificial snow or sequins.

Very nice and festive!

So, as you can see, make a New Year's decoration with your own hands is not at all difficult. Be sure to try and delight yourself and loved ones for the New Year!

Hello everyone! We continue the topic of decorating your home on the eve of the New Year holiday. And today I want to offer you to try to make a homemade accessory - wreath. This is a very bright product that will attract the attention of each guest and will create a truly festive atmosphere.

And it is performed so easy and simple, it does not take away a lot of time, and at the same time any blowing materials and decorative means are going to move. Here the most important thing is to learn how to make a framework, that is, the basis for the New Year's wreath.

The frame can and buy, for example, use foam form or hoarse, or make it yourself of paper, cardboard, wire or tissue. The following accessories are well suited for decorating: tinsel, rain, fabric, bumps, sprigs spruce, cuts from newspapers and postcards, ribbons, etc.

Also remember that this item is most often used to decorate the doors, so do not forget about the method of fastening products.

The usual round wreaths are now fashionable to replace on unusual forms, such as stars and hearts. Therefore, think in advance the form for your product. Be sure to follow and what accessories are chosen to decorate such a craft. After all, the scenery should complement your entire interior.

Rather, proceed to reading today's release and then learn in detail about how and from what you can make wreaths for the New Year and Christmas.

In addition to the door of the wreath you can weigh on the walls and shelves.

Now I will tell you how to make such an accessory using a tight cardboard and tinsel, as well as Christmas balls.

I also want to say that in such products, decor elements need to be combined according to the colors so that they do not contradict each other, but on the contrary, complemented.

You will need:

tinsel three shades;
dense cardboard;
christmas toys and other decorations;
scotch;
scissors;
cord.

Manufacturing process:

1. From dense cardboard, cut the bagel of the desired size. Next, lay on it Christmas toys and other decorations in the sequence as you like.

2. Now secure them with a scotch.

4. Corrected by Mishur wander all the product in a circle.

5. Then wrap below the craft of another color of the Misher.

6. And for the third time, turn a misher wreath of another color. You can use tinsel to Mishur Potton. And do not forget the ends of Mishura fasten.

After you learn how to make a frame of cardboard, I suggest a little complicate the work and try to perform the basis of the newspaper and fabric.

You will need:

newspapers;
kitchen napkins;
green organza (if necessary);
pVA glue or hot glue;
tinsel;
decorations.

Manufacturing process:

1. From the sheets of newspaper twist the tube and make the ring. Wrap it by several more sheets so that it becomes durable. The edges of the newspaper can be glue.

2. Now the resulting ring is wrapped with white paper napkins.

4. After fixing the tip of the Mishura and wrap it all the ring in a circle. The tip will fix again.

And now options for finished works using tinsel.

Christmas wreath of fir branches and cones on the door

I love very much when natural materials are used in the crafts, especially cones and fir branches. First, such work looks always naturally and elegantly, and secondly, the coniferous smell from such products is around the house.

So let's now try to perform a wreath using cones and twigs. And the foundation will learn how to make a foam base and fabric.

You will need:

form base from dad mache or foamflast (or cardboard bagel);
decorative wide ribbon;
decorative twigs with beads;
sprigs fir with bumps;
large artificial flower (Puansettia - "Christmas Star");
pins, scissors;
hot glue gun.

Manufacturing process:

1. Take the basis and fasten the decorative tape on the back side with the pin. Tightly wrap the basis.

2. As soon as you completely hide the foundation, fasten the tape with a pin from the inside.

3. Now prepare elements for decorating.

4. First fasten the twigs with beads.

5. And then fir branches with cones.

6. On top of the twigs stick the flower.

Or another way of making the base from the wire.

You will need:

wire;
fir branches;
durable black rope;
new Year's toys.

Manufacturing process:

First, make the round frame of the required size from the wire. Then create magnificent bundles of fir branches, and at the base, tie them to black thread at the base. Then fasten the harvested bundles on the frame. Next decorate your creation, using toys, bows, ribbons. Tie a loop.

But the detailed master class on the manufacture of a New Year's wreath from the purchase frame.

You will need:

ready or homemade frame (you can use wooden hoops);
twine or twine;
cones;
all sorts of decorations;
adhesive gun, scissors.

Manufacturing process:

1. Take fir sprigs and start them to fix them on the frame in the direction from ourselves on the right side. The twigs fasten the rope by tie to three nodes. At the same time, do not cut the thread, but wrap through the frame and fix all other branches in the same way.

2. And at the very end, the rope tie to the nodule and fix with hot glue. Make a loop.

3. Now spread the decorations and determine the place on the product. Get decor. All is ready!

And I propose to look at the photo samples.

Master class on the manufacture of wreath from balls

And now an interesting way to create accessories from Christmas balls. As a basis, take a circle of foam. You can make a frame from the already considered options.

You will need:

base of foam;
christmas balls;
beads;
tape;
paints in the canoe;
adhesive pistol.

Manufacturing process:

1. Take the basis of the foam and cover it with gray paint. Dry the product.

2. Now inside, glue small balls in size.

3. And outside, on the contrary, more larger.

Balls can be used different not only in size and color, but also of different textures (matte, glossy, shiny).

Another creative idea. Can take advantage of it.

You will need:

wire;
wide tape;
factory New Year's balls;
adhesive pistol.

Manufacturing process:

Metal wire make a round frame. Then, ride the christmas balls on the wire, while glue them initially to metal hetrels. Decorate a ribbon ready for the craft.

Samples of finished scenery this time do not throw off, as they are all identical.

We make a wreath for the new year of paper

And we have another way to create products from ordinary paper. Such creativity will be interesting and kids, so be sure to attract them to the process.

By the way, the bagel will be mastered from newspaper tubes.

You will need:

newspapers;
pVA glue;
scissors;
tassels;
acrylic paint (white);
paper for scrapbooking, color or wrapping paper;
pictures on dense sheets (with old postcards, packs, boxes);
various other decorations.

Manufacturing process:

1. The newspaper sheets twist into thin tubes. The tips of the newspaper glue PVA glue. The number of newspaper tubes will depend on the thickness of your product.

2. Now take any round item and wrap it with pipes in several layers. All pipes lubricate glue. When you lay out all the tubes, then the entire design is lubricate the PVA glue and let it be good.

3. After drying, remove the workpiece from the round item and paint the base of white paint.

5. Place them on the product, and then glue.

6. Additionally, the cracker can be decorated with sequins or beads.

Now I'll tell you and show how to make such a beauty from the cardboard.

You will need:

colored paper, color cardboard or paper with pattern;
cardboard (for the basis);
stapler;
scissors.

Manufacturing process:

1. Take a white cardboard. Circuit on it a round form. Cut the circle.

2. Then inside circle a round shape, but already smaller diameter.

3. Cut the middle.

4. From color cardboard cut the details in the form of petals.

5. Twist each petal at the base.

6. Start sticking the petals to a cardboard basis.

7. Give the details close to each other, forming a twig.

8. Thus, swipe the whole base.

9. And at the end, glue the shell ribbon.

As you can see, everything is very easy and simple. Check out more ideas? Then catch!

As a basis for crafts, you can take a conventional paper plate. Cut the inner circle and decorate.

How to sew a New Year's wreath of felt + patterns

In addition to conventional and familiar options, it is also possible to use felt and fabric. At the same time, you can also sew the foundation base and fill it with syntheps. Or use frames from twigs, paper and other materials, but the decorations themselves still sew.

I liked the following option. I share with you.

You will need:

foam base;
fluffy threads of green color;
ordinary sewing threads;
glue pistol;
felt of different colors;
scissors;
fabric patterned different colors;
chalk for fabric;
cardboard stencil figures: heart, snowman, Christmas tree, bell, etc.;
sintepon;
elements for decor: ribbons, buttons.

Manufacturing process:

1. Take the foundation, lock the fluffy thread and carefully, without glimpses, wrap it with it throughout the circle.

2. The end of the thread will fasten with glue, and the VILLIN hop up.

3. Circuit on the stencil on the felt of a larger heart, cut it out (2 pcs.).

4. On the tissue, circle a smaller heart, also cut it out (1 pc.).

5. Now the small heart of the fabric attach to the large heart of the felt and take it carefully.

6. Connect the parts of the big heart, start stitching with each other. Then fill in the syntheps and sew blank to the end.

8. Adjust all stitched figures to the fluffy basis.

9. Also tie a bows from satin ribbons and decorate the craft.

Or choose from the following work.

And of course the schemes, patterns and patterns for needlework.

New Year's wreath with her hands from the hanger. Step-by-step instruction

You will need:

tolstoy wire hanger;
candy (lollipops or hallee);
braid;
scissors;
double-sided tape.

Manufacturing process:

Take a hanger and form a circle from it. You have a durable framework, and the "Ushko" is a mount for the suspension. Coccele fasten the bracket on the frame and in turn, tie it with candy it. Candies must fully close the entire wire. Finished product decorate a ribbon.

You can also attach small scissors to a wreath, so that everyone can cut off the candy and emit it.

But beauty from the balls. You can also use tinsel and stitched figures.

Video selection of what wreaths can be made at home from girlfriend

And at the end, try to make such a sweet cradle. I think this decoration is perfect for the decor of the children's room.

You will need:

corrugated cardboard;
two objects of round form of different diameters;
pencil;
scissors;
glue;
acrylic paint;
bandage;
double sided tape;
foam;
candy in brilliant wraps.

Manufacturing process:

1. Take the cardboard and circle a round form of a larger diameter on it. Cut it.

2. Then inside a big circle a small circle. You can also take advantage of the circulation. Cut the middle.

3. Make even exactly the same basis (repeat item 1 and paragraph 2). Shaw two parts with each other.

5. Then cut the foam rubber to pieces and poke the finished frame.

6. Now tightly wrap the base of the bandage.

8. And then put the entire frame with candies.

9. Well, in conclusion, fill in the empty places with tinsel or beads. Fix them to glue.

And, as promised, a selection of interesting and most creative ideas for your creativity.

Now you know how and what can be made of New Year's wreaths from girlfriend. There will be no difficulty in such work, and the process will deliver one pleasure, the result will delight the eye. Use the following memo and everything will work out!

Create or buy a frame of the desired shape and diameter;
Secure the main material on the frame to which the decorations will be attached in the future;
Make a loop for the possibility of fastening the wreath;
Reduce the product with any girlfriend.

I wish you all the best. Holiday greetings!

The new year is a celebration of spiritual, special, giving joy and the excellent location of the Spirit, a few days before the celebration itself. It is noted that during the New Year's days, people become a bit kind to others, the atmosphere is soaked in the spirit of rapidly approaching holidays, filling with positive emotions and a sense of waiting for a miracle and something new, all around.

Recently, an interesting Western tradition is becoming increasingly popular in our latitudes to decorate the door to the New Year or Christmas Wreath. This custom is not only beautiful, but also a beneficial effect on the neighbors. After all, it is impossible to restrain a smile, passing by the door, which all his appearance shows that a family is hidden behind her who has successfully prepared for the meeting of the New Year.

So far, colorful door wreaths are difficult to find on sale, because the tradition of decorating this way, the housing has not yet spread properly. And now, on a second, imagine how it will be great to do new Year's wreath of 2019 do it yourself! One can hang on your front door (or decorate the interior door to the hall in the hall, for example), and the rest to give to relatives, friends and loved ones.

Master class: Christmas wreath from branches of ate or thu

For the manufacture of a miracle wreath for the New Year and Christmas holidays you will need:

frame base for a wreath (maybe from wire, from cardboard, from a twisted newspaper, etc.);
glue (adhesive gun) or rope (wire);
fir branches or thuu branches (bumps, tinsel, berries, dried oranges, christmas balls, etc.);
cepping or scissors;
paint or artificial snow (optional);
satin ribbons of red or gold color;
various decorations (bells, asterisks, etc.).

Step 1. Cut from the cardboard the basis for a wreath (a kind of bagel, which is better wrapped with paper, as in the photo) or make a circle of thick wires as shown in the photo.

Step 2. Fir branches need to cut into a secateur or scissors to separate small green twigs.

Step 3. Now, connecting the rope or wire together green sprigs of the thuja with small beams, screw or take these beams to the frame. Branched small chips of the Christmas tree can be scrolled by one.

Step 4. It remains only to decorate the New Year's wreath to your taste and the stylish decor can be hung on the door.

Ideas for fantasy ...

It does not matter what the New Year Wreath is made, the most important thing is that he brings joy and gave only positive emotions. And it is possible to make this wonderful decoration of your home from everything that the look of the Creator of the Beautiful will fall, that is, you.

Just take a lot of clothespins, pull them out in any color and proceed to work. From the wire hanger can be a good frame for wreath. You can also take beads of suitable size and stripped them on the promoted hanger, alternating with clothespins. Do not forget to decorate our ribbons. To the finished wreath to attach a soft toy in the form of a snowman, Santa Claus or a deer.

Carefully look at the empty cardboard tray from under eggs. By turning on the imagination and fantasy, it is impossible not to notice that its cells are similar in their form with buds of colors, which are only going to completely dismiss.

From the tray you need to very carefully cut cells and, with scissors, give them the form of buds. It is wonderful that the cellulose, which is included in the egg tray, is well crossed by any kinds of paints. This allows us to boldly experiment with different colors, creating truly fabulous wreaths.

Very funny, but even from socks you can create a wonderful composition. You can ride cutting socks for a wreath or twist each sock in the form of roses and glued them to a wreath.

You will only need cardboard, glue and, of course, a lot of buttons your favorite color. Just cover the buttons, alternating small and large, to the cardboard "bagel" and a very elegant decor element is ready! Also, large buttons can be riveted on the rope and tie the ends of the satin ribbon.

Such a stylish wreath is done on the same principle as the Christmas wreath of clothespins. For greater structural strength, it is better to use two wire circles. In wine traffic jams it is necessary to make holes and stripped on a wire, jamming them with large beads.

Do not allow waste paper in vain to occupy a place in your home. Make a wonderful newspaper decor - toys on the Christmas tree, garlands, angels, decorating decoration in decoupage style, etc. And from the newspapers are excellent New Year wreaths.

Using paper, gorgeous air wreaths may be possible. Bring old photos, cutting out of colorful magazines, snowflakes, unusual envelopes. Surely there is something interesting to create a christmas wreath. Just do not rush to immediately glue the found "treasures" to the base. Apply, rearrange, comply and only then proceed to the final fastener.

Magnificent idea - Christmas wreath with round cardboard cells for small gifts. You can build a kind of calendar by taking a christmas wreath as the basis. Of course, such a "wealth" is better not to hang on the outer side of the entrance door.

Do you know that the very first wreaths were made just from such natural materials? It looks like this composition is simply magical, and the costs do not require any costs.

If there is a desire to surprise, then painted golden or silver paint pasta on a Christmas wreath is the best way out! Just find the pasta of bizarre form, paint and arrange them on a wreath.

Dried orange and lemon slices are easy to glue to foam or cardboard. If you want to make a wreath of apples, then you need to use a very durable wire frame. Rowan branches or viburnum can easily be screwed to the base or stick into the foam, "foam" or plasticine.

Christmas wreath from Christmas balls

Truly festively looks a wreath of bright and brilliant balls for the Christmas tree. Balls can be both rolling on a wire and glue hot glue to a wreath.

New Year's wreath of sweets

The only minus of such a wreath is that they have a property very quickly "melting", especially if there are small sweet tooth in the house. Soft candy can be added to the frame toothpicks, and the lollipops are to glued together, wetting the candy with water on one side.

It is worth only to tie a lot of balloons around the frame - and that's it! Creative New Year's wreath is ready.

Do not know where to do old boning ties? The problem is solved! Just take them around a wire or other frame and an extraordinary decor element can be hung on the door.

If you decide to make a wreath of cones, you can even do without a carcass. Such a wreath of natural material looks festive and really new year.

This option is ideal for those who want to get a beautiful decor in the minimum cost. It is only necessary to wind up a misher frame (preferably green) and add minor decorations.

New Year's wreath of beads

This subtle work will require quite a lot of strength and time, but the result will look impressive.

There is where fantasies get roaring: from felt you can cut a lot of snowflakes and faces of Christmas deer and assemble them all in one wreath; Thick threads can be wrapped a round frame and decorate with ribbons, bows and ribbons; From the fabric, you can make many florals and glue their wreath.

This is the perfect wreath for a programmer. A similar version of a Christmas wreath once again proves that, in the process of manufacturing such a decor, almost any material can be put into the move!

A bit of history
What we need
Sequence
Stage 1: Cooking the basis
Stage 2: Fastening branches
Stage 3: Decoration
More ideas

Christmas and New Year wreaths on a par with a dressed Christmas tree are the symbols of the approaching holidays. The custom of creating such compositions came to us from Europe, today and in our country such a decoration is not surprising at all, but on the contrary, it has to New Year's mood. How to make a New Year's wreath with your own hands - we will tell in a detailed master class with beautiful photographs of the process, we will skip several ideas and give practical recommendations.

A bit of history

Christmas wreaths originated in the Hamburg of the Middle Ages of the past millennium. Lutheran Theologian Johann Hinrich Vikher, who took up a lot of children from very poor families, came up with a kind of "calendar of expectations" of Christmas. It was an old wheel that the priest was decorated with coniferous branches, and pressed candles to him: 19 small red and 4 white. Their number showed that day before the holiday now and how much it remains. Every day, Johann with children lit on one red candle, and on Sundays - one white. So the guys easier transferred the expectation of the holiday.

Today, a wreath of branches of a coniferous tree in Russia is associated only with a new year, the symbol of Christmas is characteristic of the same for the Catholic Church.

Wreath symbolism:

The circle with candles is associated with the globe and four sides of the world.
The circle itself is the infinity of life.
The green color of evergreen needles is the symbol of all living things.

Candles in Christmas wreaths fill the house with light, like the world during Christmas is illuminated.

Traditional New Year wreath of cones and branches can be bought in the store, but will it be so symbolic and attractive? Oddly enough, such a souvenir rarely has pre-holiday magic, such acquire for offices and far from home. Even in the century of a high pace of life, most people find a couple of hours to make a Christmas wreath with their own hands. It is quite simple, fascinating and means such a decoration is much larger than just a symbol.

Wreaths from cones and needles traditionally have on:

On the entrance door;
Above the fireplaces;
On the table as desktop decoration.

Accordingly, the design and method of attaching toys of jewelry and accessories will be different.

To clearly show that make a Christmas wreath with your own hands is quite simple, the designers made a fascinating master class with a photo so that every wishes could try to create her own New Year's decoration, while only received pleasure from the process and result. So, the New Year Wreath: MK with step-by-step instructions.

Master class from creative designers

How many variations of the decor are coming up with light head of designers, and the base always remains traditional - green branches of coniferous trees. You can decorate a spruce wreath than you like:

New Year's balls;
Tinsel;
Cones;
Fetra toys;
Beads;
Pries;
Beads and so on, just do not list.

Some ideas came to our artists:

Christmas wreath of cones and oranges;
Wreath with cotton cobs, feathers and new year toys;
And many more interesting combinations that you will see more.

What we need

So, what we need to create Christmas and New Year's wreaths:

Spruce, pine, fir branches. They can be selected in the forest belt or in the park. Choose beautiful young twigs with a good uniform cheese, it must withstand a month and a half in great form. Of course, it is possible to use artificial cheva, but the effect will not be the same, and there will be no odor from such, and this is almost mandatory wishes;
Spruce cones. You can take cedar, pine and in general any, which like. Try to choose fresh - older quickly crept in a dry and warm room;
Multicolored Christmas tree balls. Take those that do not plan to hang on the tree, it is also possible to save. Choose a small toy for placing on the sprigs themselves, you can take a bigger ball for the suspension;

Colored bird feathers are sold in Decor and Hand-Maides, we took some varieties;

Satin ribbons for bows;
Rowan twigs with berries are an unusual solution, but organically fit into the subject of the real winter tree.

Do not be afraid to use food products for work - gingerbread, candy, fruit. The main thing is not to take a perishable and watch their expiration date.

Nail program - rings of orange. They will be added to the finished decoration of brightness and will have an aroma. The smell of citrus and needles in the aggregate of any person are associated with winter holidays.
Tools: scissors, secateurs, ropes, hot glue with a gun.

The basis for the New Year's wreath is a carved circle of dense cardboard. You can use newspapers, fast, cut off a wide pipe - any round product.

Sequence

Now let's tell how to make a wreath on the door with their own hands in stages, because one of the components of successful work is the right organization of the workflow.

Stage 1: Cooking the basis

This is the most responsible step, from the execution of which the quality of the finished wreath and its fortress depends. We took a tight cardboard, cut their round billets with a diameter of 30 cm from the outside and 25 cm with internal. The wheel width turned out 5 cm. The workpiece we wrapped with a wide ribbon of gold color - such a solution will allow us to conveniently mount the branches and decor, and the random lumens will not be rushed into the eyes as something unfinished.

Instead of cardboard, the wreath of newspaper tubes at the base also keeps the form well. Creative minds even manage to create an independent composition, twisting the sheets of the old press in cones and tubes, consolidating them on the basis. But this is not our case.

Stage 2: Fastening branches

Self attach twigs simply:

Insert them into the ribbon pockets at the base of the workpiece and bring the thread;

Twist with other twigs;
Stapler or wire brackets are suitable for attachment.

Pre-prepare twigs: cut extra shoots and shorterate the main to the desired length. Worry the entire perimeter of the ring.

Let some branches be with their native cones, it will facilitate the decoration process.

Stage 3: Decoration

This stage is the most creative and interesting. Here we include all your fantasy and create.

We used cotton cobs for decoration - Natural theme is always relevant, and such an unusual solution will accurately transform the hand-made wreath.

Imagine the appearance of your product in advance and select the combined items for the decor. Let them be unexpected, then they should not be a lot.

While the sprigs are not blocked with decor, strengthen them with a fine thread: it will pull the greens to the base and visually decorate the product.

If the hand stretches to mountain branches - do not deny yourself. Fortunately, they can be collected to deep frosts.

Prepared twigs cut the sektor to the desired length, remove the ugly and spoiled berries. Insert the branches in the workpieces pockets and tie them as fir.

Now fastened delicious material - orange slices. Fix them to the composition is better with the help of ordinary threads - brackets will break the tender structure, and the adhesive simply does not grab with liquid juice. Fragrant reminder for the new year and the simultaneous memory of the sunny summer.

Feathers better fasten with hot glue. Why hot? - It instantly grabbing and drying long does not have to wait. In addition, he is blunt and will not give himself felt.

Wreath decoration with their own hands New Year's balls - the lesson is as exciting as decoration of the tree. We have placed small balls on the branches in one gamma. It is better to fasten them with threads, taking advantage of a knitting hook through the branches.

So how without different baubles and toys?

New Year's wreath on the door can contain a reminder of winter and snow. To do this, use "liquid snow" in the form of an aerosol. With it, we apply an enay to the tips of the chewing.

The manufacture of a New Year's wreath cannot be introduced into some frames - the solutions as much as the hands starts to make this symbolic accessory.

One example is what we did.

More ideas

It is not necessary to do the Christmas and New Year wreath of live branches, you can make a composition of any materials for needlework:

Fetra wreath;

Wreath of beads;

Paper wreath;

New Year's wreath from Mishura.

The choice of material is limited only by the scope of fantasy.

Video reflects the work process, repeat which is very simple.

For such a wreath, live color will be required: roses, chrysanthemums or kaki from your favorite and coniferous twigs.

If the music is not alien to your heart, you can try to make such a wreath.

Cut from the cardboard to cut the base, soak it with the braid and glue the cones from a tank log.

Very nice look and smell the wreaths of dried fruits, citrus, spices and cones with nuts.

Decorating the house of Christmas and New Year's wreath - this is a very beautiful custom that came to us from Western countries. A few years ago, such wreaths looked in Russia quite exotic. But today it is an absolutely typical view of the decoration of houses in the pre-Christmas days, which cramped from branches of ate and four candles is fixed vertically or installed on the table. According to the Catholic custom, the first candle is lit on the first Sunday of the four-week post - Advent, next Sunday - the second and so on.

This fragile wreath made from Christmas tree toys and Inea. Just shine.

For the manufacture of a wreath, artificial sprigs can be used, it is not necessary to destroy the trees at all.

Why only toys and snowmen, butterfly on a christmas wreath also looks harmonious.

Rowan twigs, dried flowers and pine yard - your wreath will be the most.

With its appearance, Christmas wreaths are obliged to the Hamburg Lutheran theologian Johann Hinrich Vikhnna, who took the education of children from poor families. In the post they were all the time asked when Christmas comes. And in order for children to be easy to count the time before the holiday, Vichern in 1839 on the basis of the old wheel made a wreath that was decorated with nineteen small red and four large white candles. A small candle was lit in the wreath daily in a wreath, and a large one was added to them on Sundays.

Symbols of Christmas wreaths highlight several basic values. Initially, the addition of fire and light in wreaths symbolized the growing expectation of the birthday of Jesus Christ - the world of the world. The interpretation of the round shape, the symbolism of the wreath, due to fir-green greenery, was added additional values \u200b\u200bof the color of candles and decorative ribbons. So Christmas wreaths and four candles began to associate with the meaning of the globe and four sides of the world. The circle is considered to be a symbol of eternal life, which gives Sunday, green color - the embodiment of life itself, and the candles - the light illuminating the world in the days of Christmas. In the Christmas traditions, the wreaths are made to decorate the three candles of purple and one pink candle, which corresponds to liturgical colors of worship during the Advent period. Pink candle is lit on the third week of Advent, when Sunday is called Gaudete, or rejoice!

And such a bright wreath can be made of bright tissue trimming. Under the picture you will find a detailed master class.

New Year's wreath do it yourself

Of course, today you can get these symbolic wreaths anywhere. But what could be better, pretty and even majestic, how to make a new year wreath with your own hands and decorate them your pre-holiday house. This will be hidden by the real sacrament of the miracle expectation, although it would seem, it's just a needlework, the result of which the New Year's toy will become what a lot of things. After all, the post is of few observing, and the ignition ritual of the candles adhere to the units in general.

Is it an artificial Christmas tree or real? I do not see the difference, but I will make a wreath exactly from artificial, why kill live tree?

Fir needs to be cut and clean regularly. And from cut branches and fallen cones can make such a wonderful wreath.

Fluffy, bright and scarf, so as not to catch a cold under the New Year - such a wreath will be on the joy of children.

But this spruce noodle appeared accurately after trimmed. And from dry twigs got rid of (the tree will be delighted), and the wreath of splurs. Do not necessarily cut a beautiful blue fir for the sake of the holiday week.

Owl and charming christmas flower poinsettia are on a wreath.

But in the process of manufacturing this beauty, a person subconsciously penetrates the sacrality of the action and to top up to complete strength overflowing with the feeling of the celebration of the holiness of the upcoming event. As for the degree of complexity of the wreath, there is nothing hard in it. In addition, it is not necessary to deny yourself a joy with children to work together with joint creativity. And after determining the type of wreath and the preparation of the necessary materials, it is possible to start work without any doubt.

From the tie, feathers, balloons, what only wreaths do not happen!

So, in a wreath, the main thing is the basis, its base that will keep the decoration from scattering. The basis is created from any suitable subject. The classic base is natural raw materials in the form of straw, rods, grape vines and even rim of a wooden wheel. At worst, you can use the wire. But in practice, any healthy material is taken as a wreath. So an excellent foundation will be made of twisted and fixed in the form of a circle of wires (for example, a simple extension cord). The segment of the hose is suitable, thick cardboard, which can be glued out of several layers of more thin, newspapers compressed in harnesses and fixed with thin wire, roller fabric, which is filled with cotton or syntheps, and the like materials.

Classic coniferous wreath.

But this candlestick wreath will play with a gentle flicker from the flame of the candle.

Toys, beads, nuts and garlic - immediately visible, the hostess in the house.

To do new Year's wreath do it yourself, We will have to stock garden or twine, scissors or a secateur, glue or liquid nails, and even decoration for a wreath. For a traditional wreath you will need a spruce or pine yard, which can be replaced by a thuuy or holly branch. You can also make it possible to make a wreath that will be decorated "for centuries", if you use artificial branches, and then periodically change the decor. By the way, you can decorate a wreath not only with the familiar New Year's decorations, but also to all that can tell you your imagination. For example - dried flowers, bumps, berries, fruits, vegetables, cinnamon in chopsticks, spices, peel from citrus, cut in the form of a spiral, cayenne pepper, tangerines, apples, artificial and alive flowers, candy, sweets, christmas cookies, garlands, christmas toys , decorative braid, beads and ribbons. Conventional tassels and paints, silver and golden sprays and artificial snowball will also be useful.

Such a wreath of ribbons can even make a baby under my mother and father leadership.

As a basis, take the ring from the wire and generously decorate it with bows of ribbons.

Who would have thought that a wreath of mint candies can be made from the usual hanger from dry cleaning.

In the handmade store, such soft blanks for a wreath are sold, you will only have to buy red felt and cut out of it the same circle size.

From felt circles and invisible forming flowers and generously decorated our wreath.

Did your old chassis drank or just have a round basis? Decorate her tinsel and wreath ready!

Also, practical tips will not be superfluous, for example, how to make a wreath of pine or fir branches. Usually, the wire frame is made or from another rigid material. Then the coniferous branches of the desired length are cut and the wreath begins. The branches are stacked in the direction of the clockwise direction, and the naked part of the previous branch is covered with a lush part of the next. The second layer is already in the opposite direction, which will help to give a volume of volume. Between the branches are fastened with wire, and it is better to take green, which will be invisible on the background of the needles. A thin garden or wire for crafts is also suitable. The number of layers is taken in which christmas wreath, do it yourself Made, will be a pleasant eye. Then the wreath is shaved by an atlantic ribbon and decorated with your chosen materials. Usually such a wreath hang on the entrance doors or on the wall, and also put on a coffee table or shelf. But the future place of the wreath needs to be thought out in advance, because it may turn out to be pretty heavy, which will not hold onto the attachment from the scotch or the stationery button, and it does not always want to spoil the wall with a thick nail. Therefore, before the start of working with a wreath you need to decide on its placement. If it is possible to fix it vertically on a robust mount, you can make a heavy wreath, and if the fastening is quite harvester, then it is better to choose a lighter form, why the decoration will be no worse. And if I still want to make a huge thing, and the fastener did not come out, you can put a wreath on a horizontal surface - a table, a shelf, stand. But here it will be possible to allow your fantasy to get roaring all the breadth and load a wreath by any, even the most huge toys. So beautiful will look pretty heavy, but very symbolic christmas wreath of cones, decorated with gold spray, artificial snow, nuts and apples. In such a wreath, laid on the table, traditionally insert candles. To secure them well, you can heat the wire and plug in the base of the candle perpendicularly, then fasten the wire on the main frame and reorganize the lower part on a third of coniferous branches.

Everything. What you need for this wreath sold in the supermarket, you should only clearly stick to our master class.

Get on the basis of a white ribbon, and then prepare snowflakes.

True, it is possible differently and make a wreath of feathers, wrapped around the basis of Boa.

And this wreath with robes is also made from a round basis and felt.

Handmade lover Surely have a lot of small glomers at hand, of which, by the way, will come out beautiful wreath.

Cut citrus circles, dry them in the oven and we will tell you what to do with this good.

And this is what: Cool the ring from straw and stick oranges on it.

However, it is not necessary to use straw for a wreath, the usual workpiece is also suitable.

Such a beautiful wreath of red balls is made easily and quickly. Read our master class.

Take a wire hanger. Such hangers are given in dry cleaning.

Pliers disconnect the hanger.

Prepare several sets of different diameter of the balls.

By the way. To work, we needed about 80 balls.

Take the balls to the base as close to each other so that the wire is not visible.

If the balls begin to get back and roll, secure their drop of glue-seconds.

Your wreath should be dense.

When the last decoration is caught, twist the ends of the hanger.

Now wrap the hook with a red ribbon.

Attach the tape with glue.

You can only make a bow from the tape and tie it to a wreath.

Although not only the basis is made almost from any suitable material. The wreath itself and its decoration can also be made as an absolutely unexpected fruit of his own fantasy. So you can create a wreath of buttons of different diameters and style, attached to the cardboard basis and suspended with a raubular buckle strap. You can also expect a husband and make a creative wreath of ties wound on plastic rim so that the tongues beautifully looked outside the decorations like flower petals. Absolutely unexpected option - newspaper wreath: Paper strips are collected in the form of a three-dimensional flower and riveted on a wire frame. You can decorate a wreath of spruce lap with small Christmas balls and memorable family photos. Since the square is not particularly foreseen, you will have to limit the five-six small photos.

Hang new Year wreaths on the dooryou can without any difficult difficulties: you need to tie a beautiful ribbon on the inside to the accessories or the door handle, shift through the top of the door canvase and fix on the right place with a button, scotch tape or clove. It will depend on the weight of the decoration and the material from which the door is made, since the carnation armored canvas definitely do not throw. On the front side on the tape, the wreath itself clings, from the inside the ribbon room is usually decorated with cones, toys and rain.

But such a wreath can be made of red ribbons and burlap.

Suspended wreaths are usually made of lightweight material. Therefore, you can handle a tire from a children's cyclist with a beautiful striped cloth, decorate as beads and small cards. It would be good to choose postcards in an old style. And from such a material wreath definitely becomes your favorite: take the handful of small clubs and decorate them a circle from the same wire. It turns out a soft and fluffy multi-colored caterpillar, which rolled out the ring. Quickly and cute. Probably, everyone will like the idea to make a wreath of dried citrus rings attached to a paper ring. A wreath can be decorated with a fir branch and a bunch of Christmas balls of brightly red color with the same ribbon. Aroma, beautiful and fun! The fragile and exquisitely looks a wreath of a vine, on which the snowflakes of all shades of blue color are pasted. The impression that they just dropped from the sky to the grape branch. Very gentle christmas wreath It turns out from the azure ribbons collected in Ryushy and decorated with small snow-white balls similar to snowballs. You can collect such a wreath and from individual modules in the Origami technique. To do this, from the green colored paper of several shades, the modules of one size in the amount of approximately 60 pieces are folded. The collected triangles are stacked on a cardboard sheet with a circle of a wreath: from the darker color to brighter, which will create the illusion of volume. In this case, the sharp angle of the module hides under the previous figures, as in real branches. Then the Candle of Pink Cardboard with a yellow tongue of paper from paper is put into the center of the wreath. On serpentine ribbons cling to paper snowflakes, as if hanging from a wreath. Cardboard sheet can be taken into a wooden frame or make a cat in the same bright cardboard. So - unexpectedly and cute. Good holidays!