Drugs 

Crochet a shirt front for a woman new models. How to knit a beautiful bib for a woman, man, child, newborn in the fastest and easiest ways for beginners: knitting patterns on two knitting needles and crochet with step-by-step descriptions and photos of new fashions

In cold times, a shirt front can be a replacement. If you want to knit such a product, it is worth studying the diagram and recommendations.

First, we will break down the diagram and description for beginners, because it is always difficult to start new things.

Master class, model one

The creation of this model is to tie a rectangle for neck height and girth. First, we will need to type a chain of air loops. Their number will depend on the length of the neck, that is, from the chin to the level of the collarbones. For a kid, you can stop at seventeen.

Model of a round product for a kid

The knitting process will start from the very top.... We describe a bib (crochet) for a baby, but it can be made in any size. Everything will depend on the number of loops made.

Model three, rectangular shirt front

Knitting of such a shirt-front (crochet) for the baby begins in the same way as in the previous versions. Only there is no need to create extensions in front of the shoulder... Because it is made on the basis of raglan.

To do this, divide the entire created rectangle into 4 parts, so that there is one distance between the 4 corners. In each of the corners we knit 3 air loops, and the rows themselves are made from the CH columns.

We will continue to work until there is a length that will cover the shoulders of the baby. Further, we advise you to continue knitting only along the front of the garment. It should cover almost all of the chest. Along the entire length of the joint of the thing, you will need to sew on buttons, which will help the child to calmly and simply put on the shirt-front. You can create a border around the entire perimeter of the product. The easiest type is the 4-column CH fans. But you can choose something to your taste.

Model four, openwork bib for female

The difference between this model and all products lies only in the fact that bib is large than for just kids. In addition, the bib (crocheted) for the female looks more delicate.

Plus this product, on it you can create an openwork strapping along the upper edge. If the knitting of the elastic is strong enough, then you may not leave room for the buttons. So, it is allowed to put it over the head, and not throw it over the shoulders.

Conclusion

In fact, knitting a shirt front is not at all a difficult task, the main thing is to make an effort and carefully follow all instructions and recommendations. Thanks to the master classes, you can make a lot of interesting things.

The diagram and description (for beginners) of some of them may seem complicated. But you can start with the simpler ones. And when experience and good skill appear, then the time will come for openwork delights.

Model 1: for beginners

Its manufacture consists in tying a rectangle along the height of the neck and its girth. So, to get a description for beginners), you will need to type a chain of air loops. Their number depends on the length of the neck, that is, from the chin to the level of the collarbones. For a child, you can stop at 17.

The first row of the shirt front: three lifting loops, 4 double crochets (CH) in the first loop of the chain, 3 half columns CH, 10 single crochets (BN).

Second: one loop for lifting, 9 columns of BN, 3 half-columns of CH, 5 columns of CH.

These two rows must be repeated as many times as necessary in order to get a rectangle that you can wrap your neck with. You can make a slight overlap. This is useful for buttoning the edges together. Draw loops along the bottom edge of the product, making an extension. To do this, in each space between the rows, tie a column CH, and in the arch of the aisle two such elements should turn out.

Now crocheted shirt front (diagram and description for beginners are presented in the article) should be tied from below with a beautiful pattern. This can be a drawing presented in the diagram, or something of your own, something that has already been mastered by a novice needlewoman. The main requirement for the pattern: expansion to the bottom, so that the product smoothly fits the shoulders.

The top and sides of the shirt front can be tied with arches of three air loops. Sew the required number of buttons along one of the edges, and use the arches for fasteners. If the buttons are very large, then some arches can be made not from three, but from four loops.

This model is easy to modify. For example, make the neckline longer so that it curls up at the top. Or tie a longer lower part, then it will cover not only the neck, but also the baby's chest.

Model 2: round for baby

The manufacturing process starts from the very top. Here is a crochet shirt for a child, but it can be made in any size. Everything will depend on the number of loops dialed at the beginning. A kid needs them much less than a teenager or an adult.

First you need to dial a chain of an even number of loops. It should be long enough to wrap it around your neck. If you do not like too tight collars, then it is recommended to knit a few more loops.

The first row will all consist of CH columns. They only need one lifting loop. In the second, there will be three of them. Then alternate the front and back embossed columns. This will be the first row of crocheted elastic.

In a similar way, you need to knit a bib until you get a length equal to the height of the neck. At this point, it is supposed to make an extension for the shoulder of the shirt-front. For this, a uniform increase of 10-15 columns in one row is performed. Then according to any scheme you like. The main thing is that it expands towards the outer edge. It remains to connect it in a circle and, if necessary, sew on the buttons.

Model 3: rectangular

It starts the same as the previous one. Only extensions do not need to be done in front of the shoulder. Because it fits on the basis of the raglan.

To do this, you need to divide the entire resulting rectangle into four parts, so that there is the same distance between the four corners. In each of the corners, knit three air loops, and make the rows themselves from the CH columns. Continue knitting until you have a length that covers the shoulders of the child.

Then it is recommended to continue working only on the front of the shirt front. It should cover most of the chest. Along the entire length of the joint of the product, you will need to sew on buttons that will help the baby to put on the shirt-front neatly and comfortably.

A border can be made around the entire perimeter of the shirt front. The simplest type is a fan of four CH columns. But you can choose something at your discretion.

Model 4: openwork bib for women

Their difference lies only in the fact that the product is larger than for children. In addition, the bib (crocheted) for women looks more delicate. An example of such a pattern is shown in the figure.

Plus, you can also make an openwork strapping along the upper edge of the shirt front. If the knit is tight enough, you may not leave room for buttons. So, it is allowed to put it over the head, and not throw it over the shoulders.

Decoration Option: Flower

Any shirt-front (crochet) will become individual with it. The diagram and description (for beginners) of the simplest flower are presented below.

On a ring of eight loops, tie a circle of BN columns. There should be 16. But between every two of the first of the three columns it is necessary to make an arch of 9 loops. They will be the basis for the flower petals. On the indicated number of loops, there will be six of them.

The second row of knitting gives the petals a shape. To do this, at the beginning of each petal, you need to perform a BN column. Then half-column CH, 19 columns CH, again one half-column CH and finish with column BN. In the space between the petals, knit one single crochet.

The third row will be final. It consists entirely of BN columns at each vertex of the previous row.

It is worth remembering that any decoration must be in place. If the product is already all in patterns and openwork elements, then even a small flower may be superfluous. But on a shirt-front, consisting only of simple columns, it will be just right.

In ancient times, the shirt front was an exclusively male accessory and was worn only by men in the cool season. But times change, but the practicality of things remains! Today there are many options for patterns and descriptions for knitting a shirt front for both female models and for girls and boys.

Protecting the neck and throat from the cold wind and cool air - the shirt-front can easily replace a scarf or turtleneck. This is a completely practical thing that will easily become an integral part of your wardrobe, as well as highlight your unique look.

Mothers and grandmothers who have knitting skills, and even novice mothers-needlewomen can, with the help of master classes on knitting bibs, independently and in a short time create this cute little thing (so necessary in a child's wardrobe!).


Children are by nature active, you need to walk with them in any weather. A children's scarf can come loose even during a short walk, and the likelihood of a cold can be high. In this case, the shirt-front will be an ideal and almost irreplaceable wardrobe item for any child.

Scheme and description for knitting a shirt front

The best materials for knitting a shirt front are: woolen threads, cotton or artificial acrylic material. You can knit various variations of bibs, which will be perfect to wear in severe frosts and at above-zero temperatures outside. But the most practical and warmest will be bibs made of dense yarn.

To begin with, it is worth recalling the elementary rules for knitting such a product. So that the size is accurate and the shirt-front does not press anywhere and does not allow air to pass through, you should tie the sample, about 10 centimeters, iron it and try on the future owner.

Choose the color of the yarn, buttons and hook, which will be suitable for the thickness of the thread.

The following instructions on how to tie a bib with your own hands for a child are suitable for ages from one to two years.


Firstly, the most important thing is that when you start knitting the product, the effect of an elastic band is created. To do this, a new loop of each new row must be threaded over the back side of the previous connected row.

We collect 35 VP and 1 VP, which will serve as a lift. Next, you need to knit with stubs without a crochet in any VP (air loop). It turns out a strip, folded in two, you need to try on a person. The thing should not be tight, but it should not sit painfully loose.

Knit approximately 60 rows. To seal and secure the elastic strip, tie the edge with simple single crochets. They will also turn out 60. Everything is clearly visible in the photo of the knitted shirt front.

Next, continue knitting according to the principle of the raglan knitting pattern (see diagram). In the presented diagram, columns with a crochet are drawn, but I advise you to knit with columns without a crochet, clinging each new row to the back side of the previous row. From my experience, I can add that instead of one VP, which forms the corner of the product, it is better to knit three VPs in any corner of the product.

It is quite easy to calculate the number of loops on the shoulders, back and face: it is necessary to divide the total by four - this will be one of the sides (back, shoulder or face). For example, for this product we have 60 loops, which we divide by 4, in total, 15 loops come out for each part. For the face, remove 3 loops on the back. Since the front part will have 2 button shelves.


The width of any individual part of the shirt front will increase as additional rows are knitted.

The front part is tied in 14 additional rows, just under the buttons. When the 15th row is knitted, you need to combine both shelves with three VPs. After that, add 8 more rows.

The left shelf is tied along the edge with ordinary columns - single crochet columns. Tie both halves at the same time at the collar. In the photo of a knitted shirt-front, you can see how the product will look like. Finish this edge with three more single crochets. The strip, which has turned out from 4 rows, perfectly covers the visible distance between both shelves. For this, 3 additional VPs were needed. They were the ones who shared the right shelf.

We also tie the right shelf with columns without a crochet - one row. The second row is knitted in the form of VP arches at the same distance from each other. The arches will serve as eyelets for these buttons. The third row, the final one, is done in single crochet columns.

You can tie the edge of the finished shirt-front with any border. Sew on the buttons and your product is ready!


Crochet shirt photo

Cast on 67 loops (edging are included in this count).
1 row - remove 1 loop, 40 persons., 12 out., 1 sheet., (1 nakid, 2 loops together.) - 6 times, 1 yarn, 1 out.
2 row - remove 1 loop, 27 persons., 1 out. and turn back without tying to the end of the row
3 row - remove 1 loop, 12 out., 3 persons., (1 nakid, 2 loops together.) - 6 times, 1 yarn, 1 out.
4th row - remove 1 loop, 29 persons., 1 out. and turn back.
5 row - remove 1 loop, 13 out., 4 persons, (1 yarn, 2 loops together.) - 6 times, 1 yarn, 1 out.
6 row - remove 1 loop, knit to the end of the row, 1 out.
7 row - remove 1 loop, 40 persons., (1 yarn, 2 loops together.) - 14 times, 1 yarn, 1 out
8 row - remove 1 loop, 31 persons., 1 out. and turn back.
9 row - remove 1 loop, 31 persons., 1 yarn, 1 out.
10 row - close 5 loops, 13 persons, 13 out., The rest are knit to the end of the row, the last loop is out.
Repeat the pattern from the first row. From these ten rows, one tooth is obtained, on my shirt-front there are 35 teeth.

Cast on 67loop, along with chrome.
1p-1p. To remove, 40 persons, 12 lives, 1 person., * 1 inc., 2p. Together. * - 6 times, 1 inc., 1 life.
Remove 2p-1p, face 27, 1 life, and turn back without tying to the end of the row.
3p-1p to remove, 12 lives, 3 persons, * 1nak, 2p together. * - 6 times, 1nak, 1nak.
4p-1p to remove, 29 persons, 1 life, turn back.
5p-1p to remove, 13 lives, 4 persons, * 1 inc. 2 points together. * - 6 times, 1 inc., 1 life.
6p-1p. To remove, persons. To the end of the row, 1 life.
7p-1p. To remove 40 persons, * 1nak, 2p. Together. * - 14 times, 1nak, 1nak.
8p-1p to remove, 31 persons, 1 life, turn back.
9p-1p to remove, 31 persons, 1nak, 1 life.
10p-5p close, 13 persons, 13 lives, the rest to the end of a number of persons, 1 life.
1-10 row - it turns out 1 "clove", repeat to the required size of the shirt front (we have 32 "cloves").





How to tie











xn - 80a6amn.xn - 80aafud2a4a ...- iz-listev

A small warm shirt front with a border of leaves. First, the border is knitted according to the scheme. Start with a junk thread. We knit a chain of air loops of arbitrary length, on

I scored 96 stitches on circular knitting needles and knitted an elastic band 2x2 with circular knitting needles. I knitted the elastic high so that it could be folded in 2 and 4.


After the elastic, I divided it into 4 equal parts in the form of 2 front loops from which in both directions (through a row) I added on the loop. And between these 2 front loops I knitted like this: 1n.-4l.p.-1i.p.-4l.p.-2i.p.-4.l.p.-1i.p.-4l.p.- 1i.p. They turned out 4 times, and between them (remember) 2 facial. I knit the desired length to the shoulders, adding loops through the row.


When I had 208 loops on the needles (should be divided by 16) I knitted a couple of rows with the front ones, and then according to the scheme:

I did a little according to my own way: in the scheme, instead of purl loops, I knitted with facial loops. And since I knitted with circular knitting needles, then I made a row according to the scheme, the next row was all knit.
When I finished the drawing, I knitted rows 15 and 16 with front loops and then closed all the loops. Then I crocheted the shells. With small pebbles (hematite) I made 3 flower buttons, and one pebble in each part of the picture.





Very very fast and very stylish
We knit from thick yarn in one evening

I want to offer you a very interesting idea for knitting a shirt front. She knits very, very quickly. Oncrochet bibsit will take you no more than three hours.

To knit a shirt-front you will need: a very thick woolen soft yarn, hook number 9-10 and circular knitting needles.

Knitting the shirt front begins with a crochet hook. The main pattern shown in the diagram below is knitted. Thus, four rows are knitted. Thus, the width should be 26 cm.

When all the main rows are connected, we start knitting the very neck of the shirt front. On circular knitting needles, we collect loops in a circle and knit with a regular elastic band in a circle (height about 15-20 cm).

That's all, crochet bibs it's finished. This shirt-front can be worn instead of a scarf or as a cape.

Wear and enjoy the warmth.



We need about 320 g of yarn, hook number 4, 4.5.

Crochet No. 4.5 to dial a chain of 68 vp. and knit in a circle with a raised elastic band according to scheme 1. So knit 9 cm crochet number 4.5.
Then take hook number 4 and knit another 9 cm.


Embossed column.

Then crochet number 4 to continue knitting according to scheme 2, respectively, performing additions. On row 13, we finish knitting.




Austen Lace Muffler openwork scarf collar!
Designer Robyn Chachula (Crochet Maker) was featured in Interweave Crochet.
A beautiful and rather simple scarf!
I made the translation at the request of the reader ...

Click - the pictures will increase! Then click a second time!









Crochet shirt from the magazine Knitting for adults. Yarn consumption 250g, hooks No. 4 and 4.5.



Beginning to knit a shirt with a chain of 68 air loops crochet No. 4.5. With an elastic band of convex and concave stitches, knit 9cm, go to hook # 4 and knit another 9cm. Then knit the pattern with "fans" according to the pattern.


Tie a flower and sew it to the front.

Dicky "Reindeer"


Dropship Reindeer from DROPS DESIGN magazine is knitted from 260g of yarn (65; wool, 35% alpaca; length 75m / 50g) - 150g gray-lilac, 100g - natural white, 10g purple; circular needles No. 4 and 5. The height of the shirt front is 31cm.

Density of knitting 17 loops and 22 rows in a square 10x10 cm.

On circular knitting needles No. 4, cast on 216 loops with gray-lilac yarn and knit with a 1x3 elastic band. At a height of 2 cm, out of every second 3 purl stitches, tie 2 loops, at a height of 3 cm, make decreases in the groups of their 3 purl stitches. Knit the remaining 162 loops to a height of 4cm.


Go to needles number 5 and knit 1 row with the front evenly decreasing 42 loops. On the remaining 120 loops, knit a geometric pattern. After that, knit 1 row of white yarn, evenly decreasing 10 loops.

On 110 loops, knit a pattern with deer, performing decreases according to the pattern. After the deer pattern, 85 stitches remain on the needles. Knit 1 row of gray-lilac yarn, adding 29 loops evenly.

On 114 loops, knit with an elastic band 1x2 4cm and close the loops freely.

Button-down shirt

Drops Design magazine dicky, tied in cropped rows in garter stitch. Such a shirt-front is especially convenient because it is not worn over the head, that is, it does not spoil the hairstyle.

The dicky is knitted from 200g of pure wool yarn 100m long by 100g, needles # 8.

After dialing 28 loops, knit 6 rows of garter stitch and 3 rows of stockings, completing buttonholes in the purl row - purl 3, * 2 together, yarn, purl 5 *, purl 4. In the next row, knit yarn overs.

Then shortened rows of garter stitch are knitted. Tie 15 loops, turn the work and tie 15 loops in the opposite direction, tie 19 loops in the forward and reverse directions, tie 2 rows of garter stitch on all loops. Repeat this technique until you reach a length of 36cm along the narrow side of the shirt front. Knit 3 rad in stockings and 6 rows of garter. Sew on 4 buttons.

To work, you need two skeins of yarn

"LILI Castle" (50 g - 350 meters, composition 60% - alpaca, 30% - merino wool, 10% - acrylic), needles No. 3, straight and circular.

For the upper part, cast on 98 loops on straight knitting needles, folding two threads at once from both skeins. Knit with an elastic band 2 front, 2 purl loops. Height - 28-30 rows, about 17 cm. And we start knitting with one front loop, then purl 2, front 2 and so on until the end of the row. The row ends with 2 purl, 1 front, 1 edge loop.

Then we distribute the loops as follows:

1 edge, 1 raglan loop, 10 front loops, 2 raglan loops, 10 front loops, 2 raglan loops and so on until the end of the row. At the end there is one raglan loop and 1 edge loop. In total, there are 8 regular lines.

Every middle 10 stitches between the raglan lines and the even raglan lines themselves are knitted in garter stitch (knit stitches in the knit and purl rows). Odd raglan lines are knitted with front loops in the front and purl loops in the purl rows. On both sides of them in the front loops, one loop is added. The added loops in the purl rows are knitted crossed.

Every middle 10 stitches between raglan lines and odd raglan lines in garter stitch (knit stitches in knit and purl rows). Even raglan lines are knitted with front loops in the front and purl loops in the purl rows. On both sides of them in the front loops, one loop is added. The added loops in the purl rows are knitted with the front ones crossed.

We repeat the rows to the required length of the product. In this case, we continue knitting on circular knitting needles.

The last 3-4 rows are knitted without garter stitching.

In the photo, the raglan lines are numbered in red numbers.

If the raglan lines are not eight, but four, then the shirt-front will turn out in the form of a quadrangle.

another way:

1. Gather the required number of stitches on the knitting needles with the rubber band. This is usually 60 to 80 stitches. The number must be divisible by 3, and the quotient must be odd. We knit with a 1x1 elastic band the neck of the desired height.
2. We knit two rows with a 3x3 elastic band. Then we start the increments. We knit one loop from the jumper between the loops before and after the front wedge. We make increments in every 6th row. If the yarn and knitting needles are thick, then add in every 4th row.
3. Thus, we knit until the desired length of the shirt-front itself is achieved. Close the hinges according to the picture.
4. Knit the planks with single crochet.
5. To stiffen the edge of the strip with the hinges, we tie one row of the "crustacean step". We do not tie the bar with loops.
6. Crochet the edge of the shirt-front itself. Double crochet pattern and air loop arches.
5. Sew on the buttons.
You can also knit on circular knitting needles or hosiery
Start knitting from the neck, dial the required number of loops on the stocking needles, distribute the loops into four knitting needles and knit with an elastic band 1/1 (or any other) as many centimeters as you need to the shoulders or more (if you want with a lapel). Then distribute the loops on the front and on the back more than on the sides, (for example: 80 loops = 1st knitting needle - in front of 25 p., 2nd knitting needle - side 15 p., 3rd knitting needle - back 25 p., 4 -th knitting needle - side 15 sts) and knit like raglan.

True, the quality of the scheme is not important, so I had to draw my own on the site Knitting box

Collar leaf pattern:


1. We collect the number of loops, a multiple of 3, without edging and knit them with a 1x1 elastic band as much as we need to get a lapel on the collar. after that, we begin to knit the leaves according to the pattern (be careful in each leaf there is an expansion and an increase in the number of loops)

2. We knit all the leaves together with additions up to the 9th row (according to the scheme), i.e. up to 3 chain stitches per sheet.

3. After that, we begin to knit each leaf separately (I indicated the rise of air loops equal to 6, but you can make 8 or more additions), the more additions of air loops, the larger and longer you get the leaf.

4. When the last 3 loops are closed, you can tear off the thread and move on to the next leaf, but I decided not to break the thread and just tied the inner edge with single crochets.

5. Go to the next leaf:


6. When the second and all subsequent ones are knitted , just try on how many stitches you need to sew together. On the diagram, with red dots, I showed 3 loops - connect. You may have more, maybe less.


7. In the photo I showed the pin loops.

By the way, if some leaves have stitched loops, others do not, some have more, others have less ... then you can get a different effect.

8.If the thread is not very dense, then the scarf should be steamed.

9.If the thread is thick, the leaves will immediately turn out to be large. If it is thin, then you need to increase the number of crochet loops.


Incarnation with Ravelrie!



2.

Such a shirt-front is connected :) Threads

Angora Ram in 2 additions. Knitted about according to the scheme of this children's blouse:, and about due to the fact that there are errors in the scheme - somewhere in the 7 - 9 row and from the 23rd (here I generally knitted on a whim). But the scheme is simple, where errors are immediately clear. The narrowing of the petal is due to knitting with a double broach of the middle 3 loops, and yarns on the sides of the petal.


Knitting density - 13 loops and 10 rows in a 10x10 cm square. Knitting begins with a chain of 59 air loops (8 rapports of 7 loops + 2 loops for symmetry + 1 lifting loops). Then knit according to the scheme, repeating rows 3-6 2 times.
The right side of the shirt front is tied with a row of 28 single crochets, in the second row they make loops for 7 buttons, for this they knit 2 single crochets, * 1 air loop, 3 single crochets *, repeat between ** 6 times, at the end of the row 1 air loop, 2 single crochet. On the left side of the shirt-front, they knit 5 rows of 28 single crochets.



We start work with a set of 79 loops. We knit 22 rows of elastic - one front loop, one purl. From the 23rd row, 6 rows we knit a hollow elastic band (one front loop, following the purl loop, is removed). All subsequent rows: the front loops are removed, and the removed purl loops are knitted with the front

Increasingly, girls and women are choosing a neat bib instead of a voluminous heavy scarf. This accessory is designed to effectively protect its owner from frost and cold wind. The specific design is reminiscent of the high neckline of a warm sweater. Due to the fact that a crocheted shirt-front for women can be completely different) is worn under a coat, fur coat or jacket, it is extremely comfortable to wear.

In what ways can you tie a bib

Knitting and crocheting. The choice of tool depends on the preferences and skills of the craftswoman. It should be noted that crocheted canvases are always slightly denser and stiffer. But this is only a plus for such a product as a crochet shirt for women. Knitting patterns can be used completely different: from classic single crochet to openwork patterns. The appearance of the bibs, tied in different ways, is very different.

There are two most popular models:

  • Rectangle clasp.
  • A shirt with a neckline and a shoulder.

The simplest shirt front

The photo shows very tight and warm for women.

Knitting patterns are not required here, since only single crochet is used. A feature of this model is the simplest cut: the mini-scarf has the shape of a rectangle with loops on one side and buttons on the other.

The diagram illustrates the correct placement of these elements.

For work, a thick semi-woolen thread of 200 m / 100 grams was used. To prevent the shirt front from causing irritation on the skin, the material must be very soft, that is, not "bite".

The sequence of knitting a shirt front

How to crochet such a neckline is described below:

  1. Cast on a chain of 55-60 air loops (VP).
  2. Knit the first row with single crochet (RLS).
  3. Perform the second row of RLS, starting the hook under the far "pigtail" of the column of the previous row. When using this technique, a relief scar is formed along the entire row.
  4. 1 VP, 1 RLS, 2 VP, skip two loops in the third, perform RLS, knit RLS to the end of the row. This is how buttonholes are formed.
  5. Repeat third row.
  6. Repeat the second row three times.
  7. Repeat third row.
  8. Repeat the second row twice.
  9. Cut the thread and thread in the ponytail. Sew on buttons.

If desired, the ready-made bib can be tied with one row of RLS or "crustacean step".

Dicky with harness

In the same method, but with a different pattern, the shirt-front is connected to the one shown in the photo below.

Here, at first, a rectangle was connected with the main pattern, then an openwork binding was made. Buttonholes are formed during the strapping process. Since the thread used is significantly thinner, the product is more elegant.

The shirt-fronts, connected with openwork patterns, look interesting. An example is the following.

The pattern with "pineapple" also looks beautiful and easily knits.

Knitting a shirt front with a shoulder

It is quite difficult to perform, but also the warmest crochet bib for women.

Knitting patterns for an openwork border can be any at the choice of the craftswoman. The photo below suggests a good option.

The dense neck consists of 12 single crochets and is performed in a transverse manner. The technique of alternating rows is applied:

  • 12 double crochets.
  • 7 single crochet, 2 half crochet, 3 double crochet.

The rapport is one repetition of the first row and three repetitions of the second. When the neck is ready, a strapping is performed along its bottom edge. The height of the neck should be at least 15 cm. In some cases, in accordance with individual dimensions, it may be necessary to knit a cloth 18-20 cm wide. The openwork binding plays a decorative role, so it can be made of any size.

The listed methods describe how to crochet a bib for any weather from different materials.