Glossy glare is a reality! Learning how to properly paint nails with ordinary varnish. How to apply color varnish correctly? How to apply regular nail polish

01.07.2020

Well-groomed nails are a must in the appearance of any girl. Sometimes they are far from the best option. It is difficult to choose a place, masters, there is a risk of contracting serious infections. Manicure at home is a very simple process. The main thing is to do everything correctly and skillfully. This article will help you figure out how to do a manicure, and how to properly apply nail polish without mistakes.

Before starting the process, it is worth considering that there are three main types of manicure: classic, European and edged manicure. In the majority of modern ones, it is hardware manicure that is practiced, since the effect from it is long-term.

Hardware manicure

Its huge plus is the uselessness of steaming. The main thing that is needed is a good apparatus and a set of nozzles. Choosing a machine designed for manicure is not at all difficult. You can consult with the masters of manicure on the forums or get acquainted with the assortment using the video. Before starting the process, it is very important to take courses or watch several video lessons about this type of manicure, since it is quite difficult to perform. At first, the manicure process will be a little difficult, but everything can be learned.

European manicure

For European manicure, you need a little more devices, but there will be noticeably fewer problems with their search. European manicure is not a very good choice in case of further coating (gel polish or regular polish). For European manicure, the following are useful:

(remover).
Orange stick.
Polishing file.
Cuticle oil.
Hand cream or lotion.

Best of all European manicure suits people with sensitive skin. In execution, it is not at all difficult and does not require training. Anyone can learn it with the help of simple video lessons.

Classic manicure

The most popular type of manicure is classic. It will require a large number of tools. True, getting them is not difficult at all. In this type of manicure, it is very important to disinfect everything correctly, because it is very easy to infect. Of the tools you will need:

Nippers.
Scissors.
Pusher.
Disposable files.
Remover (for dry and rough cuticles).
Hand bath
Dust brush.

You can learn how to do a trim manicure in courses, by video lessons, as well as by the brief instructions below.

Manicure process at home:

Remove the varnish with a cotton pad and special liquid.
Shape the nails into shape with a file. To do this, you should not engage in steaming nails, because attempts to file wet nails, most likely, will end in delamination of the nail plate.
Fill a suitable container with warm water. Add sea salt to the bath, at the rate of a tablespoon to a glass of water. You need to soak your nails no more than 10 minutes (the best option is 5-7 minutes).
After the bath, it is very important to wipe your nails dry with a towel. If there is dirt and dust under the nail, it is worth removing it with an orange stick. It is worth abandoning the use of metal tools at this stage, as they can seriously damage the nail plate.
With an orange stick, you need to move the cuticle and skin on the sides of the nail, closer to the lateral "ridges". Next, you need to trim the skin with nippers. Instruments must be thoroughly disinfected before use. Movement when cutting the cuticle should be smooth and not abrupt. It is also very important to remove the skin from the side rollers carefully, removing only a layer of dead skin.
After completing the procedure for removing dead skin, you need to disinfect your hands.
If you do not want to cover your nails with varnish, it is worth lubricating the fingertips with cuticle oil or any other vegetable oil.

How to apply varnish correctly?

Coating your nails with varnish seems to be a very time-consuming process for many, but for the best result you need to know a little more about nail polishing than girls are used to. How to apply nail polish correctly and what is needed to cover with regular nail polish? You will need the following:

Orange stick.
Degreaser.
The foundation.
Colored varnish.

So how to properly apply the varnish? You need to know this information:

First you need to complete the manicure procedure (cut the cuticles, shape the nails, etc.).
After its completion, it is worth degreasing the nails with a special tool or ordinary alcohol.
Then it is worth pushing back the skin with an orange stick.
Next, you need to apply a base suitable for the selected varnish, for a longer-lasting result.
After the base has dried, you can start varnishing.
The colored layer must be covered with a top to avoid scratches and longer wear.
At the end of the procedure, if desired, you can apply oil and moisturizer to your nails.

Gel polish

Gel polish is a very trendy type of nail care. Some girls do not really like to entrust the manicure process to outside masters. Despite the fact that the coating procedure looks quite complicated, it will not be difficult to repeat it at home.

How to properly apply gel polish at home?

You can learn how to apply gel polish correctly with the help of courses, although in any business the main thing is to fill your hand. You can offer your help to your friends, mom or sister (the main thing is not to forget about disinfection). The Starter Coating Kit consists of:

UV or LED lamps.
Degreaser.
Base coverage.
Top-end coverage.
Means for removing the sticky layer.
Coating removers.
Colored gel polish.
Items for decoration (optional).

So what you need to know about how to properly apply nail polish?

After completing the selected type of manicure, you can start preparing the nails for coating.
You should start with washed down nails with a buff, for a better connection of the coating and the nail.
Next, you need to apply a degreaser.
Then you can start applying the coating and its polymerization. You should start from the base. Alignment can be performed as required. The base should be dried well in the lamp (the time depends on the lamp, but usually 1-2 minutes).
After applying the base, you can start applying the color. The color must be dried in a lamp.
Next, you need to complete the top coat. The top should also be dried in a lamp.
At the end of the coating, the sticky layer should be removed using a suitable liquid.

Here's how to apply gel polish in stages.

Nude in combination with sequins remains in fashion no matter what.

Applying gel polish to your nails correctly is like a family of six - easy, simple, but practice won't hurt. Manicure is a real art, the main thing is to do it skillfully.

It would seem a simple question: how to apply color varnish correctly? But it turns out that not every girl knows the answer to it, especially when it comes to it. To resolve all doubts, we present a selection of professional tips and tricks that will easily help you master the basics of home nail design.

How to apply colored nail polish?

Home manicure turns many away from the novelties of the nail industry. And, indeed, why buy bright and original varnishes if they do not want to lay down on the nails with a neat and even layer. But you shouldn't despair and save money for manicure professionals, if the only question is how to properly apply colored varnish on your nails. Everything can be solved. The main thing is to understand a simple technique and strictly follow it.

Coating nails with varnish of any color consists of just a few stages:

Hand preparation. This includes the manicure itself - shaping the nails, removing the cuticle - and degreasing the nail plate. In order for the varnish to hold for a long time and well, before applying any composition to it, you need to wipe your nails with a nail polish remover or just thoroughly wash your hands with soap and water.
Base application. The most important stage, the thoroughness of the execution of which does not play any role. All nails must be covered with a special base for varnish or a simple colorless composition. What will it give? Alignment of the nail, protection against harmful components of colored varnishes, base for strength and quality.
Coating nails with colored varnish. The general principles are the same for all nails - the varnish is applied in three fairly quick strokes. First, the middle of the nail, and then on the sides of the first stroke.
Anchoring. An optional step, but necessary if you want to show off with a beautiful manicure for more than one day.

But here's what's strange, exhaustive information on how to properly apply colored varnish on nails is still not a guarantee of a long-lasting manicure, so we present several universal nail beauty tricks.

Secrets of high-quality nail polish

It turns out that you can't create a high-quality nail design just by following the "correct" instructions! Covering your nails beautifully is a lot of work and a little trick. Among them noteworthy are:

Brush. Good expensive varnishes most often have their own good brush for applying the composition. But not always! In order for the varnish to lay flat, the brush must be long enough and have a soft bristle. Only then will it be possible to obtain a uniform and neat coating.
Varnish. For uniformity of the composition, the varnish must be mixed before use, but this must be done not by shaking the bottle, but by rolling it in the palms. This will avoid the appearance of air bubbles and will guarantee a high-quality manicure.
The consistency of the varnish. The shorter the nails, the more liquid the compound should be used.
Layers. Two coats of polish look better than one, as re-coating helps to complete the manicure.
Subsequence. For each nail it is worth re-dipping the brush into the bottle, and not using the "remnants" of the varnish from the previous nail.
Drying. In order to hold it steadily and for a long time, it is necessary.Under normal conditions, it takes at least 30 minutes for all layers to completely and well dry out.
Skin contact. If the skin surrounding the nail is stained with varnish during application, then the composition can be removed with a cotton swab dipped in nail polish remover. It is not necessary to remove small "splashes" - they will disappear by themselves when washing hands /

It turns out that it is not difficult to apply colored varnish correctly, especially if you know all the little tricks of a high-quality manicure and use them!

Let's be honest, not everyone and not always visit a nail or pedicure salon.

Sometimes for savings, sometimes there is simply not enough time. Therefore, the question "how to paint your nails yourself" does not cease to be relevant.

Simple secrets will tell you how to paint your nails so that the manicure looks neat and beautiful, and the nail polish lasts for a long time without giving you any trouble.

Before applying varnish, degrease your nails with a special liquid to remove it. This will remove dust, sweat from the hands and other dirt invisible to the eye from the nail plate. The varnish will lay on a clean surface better, and it will hold much longer.
After that, it is advisable to rinse them with clean water. You can simply wash your hands with soap and water.

Before applying varnish, toenails must be processed, sanded and degreased more thoroughly than on the hands.
For how to properly do a pedicure, see.
No matter how boring the forced inactivity may seem, dry the varnish thoroughly, at least 20-30 minutes, then you will not have to redo the work or make significant adjustments.
It is better to paint nails in daylight.

The main problem that prevents you from painting your nails beautifully at home is the difficulty in drawing the line at the base of the cuticle. Done sloppily, it negates all your efforts, the manicure looks untidy. A small master class can help the trouble.

To draw a straight line, the brush with the collected varnish must be placed on the nail at its base. A slight "push" back will cause the bristles of the brush to push against the cuticle. With a confident movement, we make a smear to the tip of the nail, if necessary, paint over the free side space. Using this method will allow you, with a little practice, to get almost perfect nail contours.

If you do not have the accuracy of hand movement, try not to bring the hand to the lateral edges of the nail plate and not close to the cuticle. It is difficult to remove varnish that has got "where it is not necessary" without leaving a trace, even its light traces spoil the appearance. Therefore, it is better not to bring the lines a little than to stain the skin of the fingers around the nail.

And now

1. Start with clean nails, the surface must be degreased.
2. Apply and dry the base coat to avoid yellowing nails and polish flaking.
3. Apply a drop of nail polish to the center of the nail, just above the cuticle.
4. Gently "stretch" the drop with a brush down towards the cuticle, leaving a very small space near the cuticle.
5. Now move the brush towards the tip of the nail to form a straight line.
6. Place the brush with varnish again in the center of the nail and cover the side of the nail with varnish, moving upward.
7. Try to apply polish as close to the edge of the nail as possible.
8. Repeat step 6 on the other side of the nail.
9. Repeat step 7 on the other side of the nail.
10. Let the varnish dry and, if necessary, cover the nail with 1 or 2 more coats of varnish. Secure with clear cover.
Based on materials ladysarafan.ru

And in conclusion, let's talk a little about the varnish itself, what it should be. After all, a beautiful manicure and the health of your nails directly depends on the quality of the varnish.

The following says about the quality of the varnish:

1. Easy to apply and lays down evenly over the entire nail plate and forms bubbles;
2. Keeps on nails for about a week and does not crack;
3. Dries up in 5 minutes;
4. The composition of the varnish should include film formers, synthetic resins, softeners, thinners, color pigments and dyes (it is better that they are natural).
5. Toluene and formaldehyde should not be included in the varnish, as they negatively affect the health of nails.
6. The texture of the varnish should not be too liquid or too thick;

It is also very important to pay attention to the bottle itself and the brush. It is better to choose a small bottle, as the varnish begins to dry out over time, and it is also better to give preference to varnish with iron balls inside. They shake up the varnish and prevent it from drying out. The brush should be of medium hardness and, when applied, should take the form of an open fan, where all the fibers are evenly distributed. In this case, the brush should not climb, that is, all the villi should remain on the brush, and not on the nail.

Neat and well-groomed nails are a woman's pride, as hands say a lot about their mistress. Therefore, the task of any woman is to learn how to do the right manicure. A variety of varnish colors will help to express your individuality and make you irresistible.

Despite the appearance of a large number of different long-term coatings for nails, ordinary varnish remains in demand and we will consider how to properly apply varnish on nails in this article.

The varnish brands offer trendy color palettes with a variety of effects. It cannot be argued that gel polishes have a richer palette, since some brands present very complex and deep tones of varnish. It all depends on the brand, on the quality of the product.

Nail polish is popular among women who prefer to take care of their hands on their own, firstly; secondly, among women who need efficiency in this process, and thirdly, girls and women who do not need persistence and manicure for three weeks prefer varnish.

Varnish coatings today have become much better and more durable, and a manicure can easily last up to ten days, subject to all the rules for applying varnish.

Manicure

Many women choose to do their own manicure. With the availability of all manicure tools on sale, master classes and training lessons, learning how to do a manicure professionally is very easy and quick. Women have mastered this skill, but not everyone can master the complex procedure of coating with gel polish or shellac.

This requires a set of tools and skills in working with thick rubber mixtures. Therefore, varnish remains a popular commodity. Its application is much easier, but there are special moments and secrets.

Applying varnish after manicure is a condition for the preservation and duration of the coating. The cuticle should be clean and mobile, pterygs and burrs removed, the nail polished. If the nail plate is clean, the varnish will lie flat and firmly.

The last stage of preparation is the degreasing of the nail. To do this, you can use the professional cleanser, the most popular at home - Severena, or the usual varnish liquid and alcohol solution. Uncoated nails have a layer of fat, just like skin. This is a secreted fat that mixes with loose skin flakes and dust. This grease layer will cause the coating to peel off, so that this does not happen, you need to degrease the plate before applying the base. Degreasing removes the fat layer and dries the surface.

Base coat or base coat

Basecoat serves several functions. The base protects the nail from the aggressive action of colored varnishes, prevents yellowing of the nail. A natural nail, even after polishing, may have roughness and microroughness. The base layer will fill in the relief of the nail, and the varnish will not get into cracks, will not start cracking.

Often the nail polish will crack and peel off due to the poor condition of the nail. In the place of nail delamination, the varnish is damaged, therefore it is important that the surface is perfectly flat and smooth.

After polishing the nail plate and applying a good base, even medium-quality varnish lasts a long time.

Bases and bases are presented on the market in a huge range. These are both domestic and foreign products. There are a lot of Asian brands of manicure products today.

In each line of varnishes, base and top coatings are necessarily present. When buying, you can pick up all the products of one brand, this will affect the quality of the manicure.

The base is applied to the entire surface of the nail. It is advisable to wait until it dries and only then proceed with the application of a colored coating. Some manufacturers recommend two coats, but that's fine if you like a thicker coat like gel polish or shellac. If you are looking for a thin coat, one coat is sufficient.

Colored coating

Varnishes are thick, as a rule, two or three layers are needed for a rich and deep tone. The most difficult first layer, when you need to draw an even rim of the nail without touching the cuticle. Just like gel polish, regular polish is applied under the cuticle. If applied correctly, the varnish will not smear or touch the cuticle.

First option

Remove excess polish from the brush by twisting it in the neck of the bottle, and place the brush three-quarters from the end of the nail or right next to the cuticle. Draw a strip.

Place the brush again at the base of the nail, but not with the end, but with the brush turned almost 90 °, that is, it will be located horizontally. Draw a semicircle to the left and also to the right with the side cut of the brush. The harder you press on the brush, the more its shape resembles a fan, and the smoother the line is drawn from the drawing with the side of the brush. With this method, the coating line is perfectly flat, going along the rim of the nail plate. If you do not unfold the brush and paint with the end of an even oval, it will not work, especially flaws are noticeable on bright varnishes.

If the brush is cut straight, then it is difficult to make a completely even semicircle with it. It is easier if the brush is rounded. If you expand it, then it is easy to paint over the oval shape of the nail. After sealing the end, you need to wait for the coating to dry and apply a second layer.

Second option

A brush with a drop of varnish is placed almost at the base and gently moves forward to the cuticle. At the same time, you need to press on the brush to form a fan and create an even line along the rim. This is difficult to do with liquid varnishes because they immediately flow under the cuticle. For them, the first way is more like.

Bringing the brush with a drop to the rim as much as possible, draw a strip in the center of the nail and paint over the sides, slightly expanding the brush. If the brush is wide or semicircular, then it will cover the entire center of the nail.

All other varnish application options are a combination of these two methods.

Top coverage

The manicure is completed with a top coating, which can be with any special effect: glossy, matte, diamond, neon. The final coating keeps the manicure intact for a long time.

Cuticle coating

Before applying the base, you need to push back the cuticle with a metal or silicone pusher. The secret is to push the skin further before painting each nail. Then it will come back and cover the edge of the varnish. For a long time, the manicure will not look overgrown, not neat. But even when the nail grows back, an even rim of varnish will appear.

At each stage of the coating, you need to paint over the end of the nail - seal it. This is done to preserve manicure and for beauty.

In the process of learning to apply gel polish, certain mistakes are inevitably made that upset novice masters. Let's take a closer look at them so that your home experiments and creativity bring only positive results and impressions!

Preparing nails for manicure with gel polish: what you need to pay attention to. TOP-10 mistakes of beginners.

Careful and high-quality preparation of nails will help the master quickly and correctly apply a colored coating, as well as ensure good adhesion of the nail with subsequent layers of applied materials. Unfortunately, mistakes happen at this stage in the work of both experienced craftsmen and those who bought for the first time. What are the consequences of the shortcomings made when processing marigolds and applying materials for degreasing, cleansing, dehydrating and improving adhesion?

Mistake # 1: base for gel polish lay down with influxes.

Cause: you have not completely removed the old cover. It is necessary to carefully cut off or all the layers of the previous design so that the layer of the new one fits perfectly evenly on the nail and aligns all the grooves and depressions.

Mistake # 2: microbubbles and mini-voids are visible in the layer of the cured base.

Cause: in the process of unedged manicure, you did not completely remove the cuticle, pterygium and eponychia. In the process of baking, micro gaps were formed between the layer of the nail and the particles of the skin remaining on the nail. When wearing this design, detachments and cracks can form at the cuticle due to the ingress of water under the base layer.

Mistake # 3: the colored coating has peeled off the nail, starting from the base layer.

Cause: This is due to the fact that the master could skip the stage of removing the upper keratin layer. Buffy the marigold, it is important not to damage it. Do not apply significant force when pressing with the tool on the nails and keep the correct direction of movement. Correctly buff from the cuticle to the free edge, with light movements.
The same picture is observed if instead of a buff is applied. It will make the nail smooth instead of rough, and the coating on the nail will simply not hold.

Mistake # 4: under the layer of gel polish, cracks formed in the nail plate, which led to a layer of the nail.

Cause: the result of nail cracks and chips is a thinning of the natural nail due to too intensive grinding. The other extreme - insufficiently good processing of the nail with a buff - may become detachments of the coating due to peeling keratin scales not completely removed by the master.

Mistake # 5: gel polish is peeled off with a whole plate.

Cause: particles of pterygium remained unnoticed on the nail, and delamination on the free edge was not removed. With the subsequent regrowth and exfoliation of the pterygium, the gel coating also leaves the keratin of the natural nail. The continuing delamination of the natural nail inward (under the gel polish) leads to detachments of the manicure already from the side of the end.

Mistake # 6: shellac and gel polish are hard chipping a few days after coating.

Cause: this phenomenon can have three reasons at once - the periungual ridges and the surface of the marigold are bad; the stage of application is skipped; you touched the nail after degreasing and before removing the stickiness c. How can this problem be solved?

Degrease the nail in stages: disinfect nails and hands with a spray or foam. Next - remove the fat from the marigolds, and finally, process the nails and side rollers;
Do not skip applying an acid-free primer. It is advisable to use a product from the same manufacturer as the base for the gel polish. This way you guarantee maximum adhesion between the base and the natural nail;
Try not to let your fingers touch the treated nails. If this happens, re-treat the surface with a lint-free puff.

Mistake # 7: the coating cracks and breaks off in small pieces.

Cause: you may not have sufficiently cleaned the nail from dust (sawdust), dirt and sebum (you poorly treated the surface with a degreaser or used a substitute containing oil instead).

Mistake # 8: in natural nails, even without blows, cracks formed up to the flesh.

Cause: nails suffered from drying out. You or the technician may have used inappropriate preparations (alcohol, acetone, solvent) for cleaning and degreasing. Their regular use without subsequent treatment of marigolds or leads to weakening, deep dehydration and thinning of natural nails.

Mistake # 9: when using the base immediately on the dried primer (the quality of both preparations is good and the shelf life did not come out), after a few days your coating will still chip off and peel off.

Cause: if you went through all the other options and excluded, remember: do you remove the remnants of the degreaser from the nail with ordinary cotton pads. This cannot be done. The discs leave invisible villi, impairing the application of coatings and leading to a loss of aesthetic manicure. Contraindicated with gel polish and not removed residual traces of oil or cream (they must also be thoroughly "washed off" from the nails with a gentle degreaser). Check also the quality of degreasing. If you have applied the base, dried it and see bald spots, repeat the application of the base and be sure to seal the end of the nail.

Mistake # 10: your client has long, but thin nails, the length of which you both decided not to remove.

Cause: gel polish certainly shields nails from external negative influences, but cannot 100% exclude the risk of cracks and chips. The coating retains elasticity on the nail. And if the nail plate bends and breaks, the same will happen with the nail. Hence the deep cracks in the nail and shellac itself. The way to eliminate the problem will be the preliminary strengthening of the marigolds or the correction of the length.

The process of creating a design with shellac and gel polish. TOP 10 common mistakes and how to fix them.

If you managed to carry out the process of preparing nails for applying shellac, avoiding all the pitfalls, do not lose your vigilance! Creating an image and decorating it with design also has its own subtleties and interesting life hacks.

Mistake # 1: you carefully painted your nails with a thin layer, but after drying in the lamp, you found cured streaks.

Cause: when you or the client placed your hand in the lamp, you could keep your fingers tilted throughout the drying process. In this case, capricious or very liquid gel polishes could leak into the side ridges and onto the cuticle. You can solve this problem with a gel polish remover, a lint-free wipe and a beveled edge. When you paint a nail, paint over the surface, avoiding lateral ridges and cuticles, but also do not allow gaps.

Mistake # 2: The new gel polish is chipping and cracking, although the design is covered with a tight top.

Cause: this phenomenon may be due to the use of an expired top, a conflict of coatings (color and top), or the use of an improper quality finish.

Mistake # 3: Colored shellac is deformed after drying, bubbles and voids are visible in the coating. The shelf life of the gel polish is in order, it was purchased from a reliable seller with a quality guarantee.

Cause: the coating has been applied too densely or has not been dried sufficiently long in or. Remember: the main rule of manicure with resistant polymer coatings is to apply thin layers, squeeze out the brush with excess on the bottle neck, follow the manufacturer's recommendations on the timing of polymerization of materials.
Another common reason is that you vigorously shake the bottle of gel polish before applying, which led to the formation of air bubbles in the thickness of the material. The correct way to lift the color pigment from the bottom is to roll the bubble from the gel polish between your palms.

Mistake # 4: your manicure is chipped and cracked, although you know for sure that the gel polish is of high quality and is stored in compliance with all the rules and sanitary requirements.

Cause: if the culprit isn't shellac, turn your attention to your UV or LED lamp. If you have a completely new machine, there may be a manufacturing defect. For a device that has been in operation for a long time, it makes sense to check and replace them if the service life has been exceeded.

Mistake # 5: By applying layers, you do not brush the free edge of the nail with a brush.

Cause: the secret of longevity of shellac manicure is the tightness of all layers. If you neglect to seal, any of the layers of base, color, or top you apply may peel off under the influence of water, housework, or careless manicure.

Mistake # 6: you love to create manicure by mixing colors and creating unique shades. However, despite all the tricks, the coating lasts less than 14 days.

Cause: mixes of colors from different brands, or the use of a base, top, color, primer and dehydrator from different manufacturers may differ in poor wear. It is not in vain that brands recommend a "family" approach to the purchase of materials for manicure with gel polish. The fact is that the formulas of all shellac manicure products are created in such a way that their components complement each other and provide maximum design durability.

Mistake # 7: your manicure shows record wearing times, but the decor elements quickly chip, grow cloudy or peel off.

Cause: the secret of high-quality fixing of the decor is fixing the top with the second layer, which is often not done by beginners. For, especially large ones, it will be good to smear the gaps between the crystals with top. And for or it is extremely important to adhere to the drying time in the lamp. Thick layered designs should not dry in less than 3 minutes on the final layer of the top. An excellent solution for the master will be such well-proven top coatings as. Their dense, rich texture is specially designed for extra-strong fixation of decor and reliable protection of manicure.

Mistake # 8: you are using completely new coatings and materials with an expired and about to expire in the same design.

Cause: it is undesirable to use old gel varnishes in manicure. From the time the bottle is opened, the texture of the product changes, shellac can be applied in thick layers. When they dry, air pockets are formed, leading to inevitable detachments.

Mistake # 9: you put gel polish and shellac on your nails with zero length, and clients soon complain of chips and cracks.

Cause: practicing masters advise not to apply gel polish on too short nails. Either increase the minimum length by, or advise the client to come for a manicure as soon as at least a small free edge grows. The fact is that the contact of the edge of the marigold with the fingertips is fraught with the transfer of subcutaneous fat, traces of household chemicals and sweat from them. If the nails themselves do not wear shellac well, such contact with sweat secretions will inevitably lead to detachments.

Mistake # 10: Your client has little time for design, and you are in a hurry to quickly create a finished image, without observing the required number of layers, their drying time and the density of the applied materials.

Cause: the image created in a hurry will not please you with longevity. The nails need to be painted slowly and carefully, lightly smear the ends on each layer. If you are working with a UV lamp, dry the layers for at least two minutes each. For greater durability (especially with problem nails), the base and color must be applied in two layers each, and with a voluminous and textured decor, re-coat the manicure and top.

How to properly handle gel polish nails immediately after creating a manicure: what you can and cannot.

Like lacquer design, shellac and gel polish manicure requires care, attention and care. A high-quality, creative, complex design can cost a client a considerable amount, depending on the skill level of the nail master and his place of work. So how can you enjoy the image in its pristine beauty and not be ahead of time with broken nails, a dull coating or an image with cracks and detachments?

It is possible and necessary to do the following after creating the gel polish of the image:

Regular massage of the cuticle with liquid or cream or lotion. This is especially true for cuticle manicure. A neat and well-groomed periungual skin will help your hands look beautiful, tidy and well-groomed. The slow growth rates of the cuticle and pterygium will also have a good effect on the wearability of the design. Contrary to popular belief, care products will not adversely affect the wear of the coating after they are completely dried in the lamp.
Doing housework in, including preparing food with foods that have a strong color pigment (beets, carrots, etc.). If you wear light shades of shellac coated, then one day you may encounter haze or the fact that the shade is smudged. The situation will be saved by a lint-free napkin and alcohol. Wipe your nails gently and enjoy the rejuvenated beauty.

Have you taken off your manicure and are faced with the fact that your square-shaped nails began to curl at the tips? If the problem is persistent and reappears after treatment, you will have to change the shape of the marigolds. However, never do this while wearing the design. Cutting or filing nails with shellac, you risk damaging your nails and then restoring them for a long time.
Even the owners of strong and rapidly growing nails, many practicing masters advise, after 3-4 designs, to let the nail plate recover. Practice for several weeks, or. Strengthened, moisturized and nourished nails will again delight you with high-quality shellac design, without peeling and breakage of nails.

Along with the positive aspects of a long-lasting manicure with gel polish, there are several significant prohibitions regarding this coating.

What absolutely cannot be done if you decide to clothe your pens in gel polish for 2-3 weeks?

Try to limit skin and nail contact without gloves with aggressive household chemicals, facials with acids in the composition, as well as hair dyes and products containing acetone. The components of these products can adversely affect the wear period of the manicure, as well as cause a dull gloss or significantly change the color of the coating.
Treat the coating as carefully as possible. Do not use gel polish nails as an opener or screwdriver, toothpick or scraper. Remember, marigolds under shellac retain their elasticity and increased mechanical stress is harmful to them.
Don't sunbathe for too long. The more intense the sun's rays, the greater the risk of burning out bright shades of gel polish.
Do not try to correct the regrown design yourself. This type of coverage, in contrast to, does not imply a point correction. After 2 weeks, it is better to completely renew the manicure than to tint and grind the regrown space of the marigold.

How to properly apply gel polish on natural and artificial nails: technology, master classes and video training.

The step-by-step procedure for manicure with gel polish at home is not too difficult and requires only regular practice. We invite you to get acquainted with our library of educational articles and master classes that reveal all the subtleties and details of design with gel polishes: Starting to master gel polish, amateurs and inexperienced masters ask themselves: is the technology for performing manicure on natural and extended nails the same? We answer and share secrets.

What is the difference between performing a manicure with shellac on extended nails (on acrylic, gel, tips).

In practice, the processes of creating an image on natural and artificial nails are quite similar. The main thing that you DO NOT do with extended marigolds is:

Do not use a primer. High-quality degreasing and cleaning already guarantee strong adhesion of the base and, with acrylic or gel. Do not forget to just lightly buff the nail.
Apply gel polish on artificial nails only once, as it will not work to remove the design from them to the base. And you will inevitably have to make a correction.

Create artificial nails as thin as possible so that the subsequently applied gel polish does not create the appearance of excessively thick and not aesthetic nails.
Choose designs in a color range close to the natural color of natural nails. So visually, you can temporarily, but postpone the day of the change of image.
Apply the coating in thin layers, pressing the brush against the nail. Unlike natural nails, the correction of blemishes on artificial nails is fraught with violations of their adhesion to the surface of the native nail. If your experience with extended nails is not enough, it is better to entrust such a manicure to the hands of a professional.

We hope that now the bright, beautiful and alluring world of gel polishes and shellacs has become clearer and closer for you. Stylish and durable manicurists!