Encyclopedia 

How beautiful it is to cut snowflakes from diagram paper. How to make a beautiful paper snowflake

And perhaps the most popular of these is the paper snowflake.

There are many ways to make a paper snowflake, from very simple to very intricate and original.

In this article, you will learn how to make beautiful snowflakes, and how to create various Christmas crafts from these snowflakes.

But first, it's worth recalling how a simple, beautiful snowflake is made, from which we will build on in the future.


Diagram of a beautiful snowflake made of paper

You are offered detailed instructions on how to create a standard snowflake.

If some steps are not clear to you, you can find a video instruction below.

1. Prepare a sheet of A4 paper and cut a square out of it. To do this, bend a corner of the paper, pull it to the opposite edge, and fold it. Then we cut off the extra piece and get a square.

Here's how to do it:


2. The triangle that you have turned out needs to be bent in half and put with its top up.


3. Take the left edge of the triangle and pull it a little further than the middle.

Then overlap the right edge.

* You can start folding the right edge first and then the left edge.

* The main thing is that the edges do not protrude behind each other.


4. Flip the workpiece over and cut the lower part to the level of the strip that you get (see the picture).


5. It remains to draw the pattern you cut along the contour. Here are some examples:




Video instruction:


Another option:


Beautiful volumetric snowflake made of paper


You will need:

Paper (white or colored)

Ruler

Pencil

Scissors

1. Cut a square out of paper - bend a corner of the sheet, pull it to the opposite edge, bend and cut off the excess bottom. You will need two identical squares.


2. Bend the resulting triangle in half again.


3. Cut out the petals from the first and second blanks.



4. Open the workpiece.


5. Glue the middle petals to the middle.


6. Repeat the same with the second piece.


7. Glue the blanks together.


You can decorate a wall or windows with such snowflakes.

Cutting beautiful snowflakes from paper

Garland of snowflakes








Suspended structure made of snowflakes

You will need:

Knitting thread

Snowflakes (in this example, these are ready-made snowflakes made of felt, but you can make snowflakes with your own hands from paper or cut them out of felt using a printed and cut out template).

* Glue one end of the thread to the snowflake, and the other to the hoop. Repeat this step with other snowflakes, varying the length of the thread.


Here's another option:


Schemes of beautiful snowflakes from paper bags


Prepare several paper bags of the same size. 2 colors can be used for better effect.

You will also need a glue stick.

1. Spread glue on the bottom of the bag and glue another bag to it. Repeat the same for several packages.

2. Cut out the desired simple pattern at the top of the glued bags.

3. Unfold the bags and glue the first and last to create a snowflake.

Video instruction:


How to cut beautiful snowflakes like snowmen



How to make a beautiful snowflake out of unnecessary paper


You will need:

Scissors

Hole puncher

Some styrofoam or foam.

From the previous paragraphs, you already know how to cut snowflakes. Therefore, here we will go directly to the next stage.

1. First, make two snowflakes of the same size but different colors. In this example, the diameter of each snowflake is 7.5 cm.

* It is better to align one snowflake, and leave the other as it is.


2. Prepare some styrofoam or foam and cut out a small circle. In this example, its diameter is 10 mm. Use a stapler to make a hole inside the mug. You will have a small circle after using the stapler - save it.


3. Glue a circle of Styrofoam to the center of a flat snowflake, and a small remaining piece to the center of an unfinished snowflake.


4. Apply glue to the opposite side of the unsmoothed snowflake, and glue it to an even snowflake. Press a little on the snowflake so that it "falls" slightly into the foam ring.

* Make some of these snowflakes to decorate your house and tree.




Snowflake medallions are simple and beautiful


You will need:

White paper

Scissors

Stapler

Pencil.

1. Take a sheet of A4 paper and cut it in half lengthwise.


2. Begin folding each half of the paper into an accordion fold. You can fold it in half first, then in half again, and so on, to get an even accordion.


3. Secure the accordion in the middle with a stapler or thread.

4. Draw a simple pattern on the side of the accordion and cut along the contour (see image).


5. Unbend your blank and glue the ends to create a beautiful snowflake.


Here are some more pictures:



DIY beautiful snowflakes from old newspapers


You will need:

Scissors

Acrylic paint.

1. Unfold the newspaper and place it on a table or other work surface.

Greetings to all! Today is November 12, and there is still no snow in our city. What's the weather like? We are all already in anticipation of winter fun and the snow-white outfit of nature. I really want to go outside and feel how slowly and gracefully snowflakes are falling on you.

As a matter of fact, it will be about them, about these white cut-out beauties! Probably, these pussies are irreplaceable attributes of decorating houses, streets, school and kindergarten premises in winter. There are different ways of making this craft. The main difference is the material from which it is made and the cutting methods. We will talk about how to make paper snowflakes using different patterns and cutting patterns.

Do not forget that such blanks can be used as crafts for the upcoming New Year. Ideas for interesting and beautiful things that you can do with your own hands, you can, we are preparing for the holidays in advance.

You know, I want to advise you to introduce such a tradition in your family: to get together on cold evenings and create together with the children, making and cutting out these simple designs, and then sticking them on the windows. And let passers-by envy your beauty !!

The easiest way to make a snowflake is to fold the sheet 5 times. We fold the first four times in half, and the fifth diagonally. Cut out any patterns from the resulting blank and unfold. Our New Year's beauty is ready !!


But this is a very simple and not entirely interesting way. For complication, you can perform a four-sided version:


Or pentahedral:


Here's another simple and easy way to cut our product:

And to make it even clearer for you, let's now take a step-by-step look at the manufacturing process:

  • We will make snowflakes from square paper. If you have a standard A4 sheet, then bring it to the desired shape. Now fold it over to form a triangle. Cut off the excess part and get a perfect square.
  • We add the square diagonally, we get a triangle.


  • Fold the triangle to the far corners, making another smaller triangle.
  • We have a blank. Apply any pattern to it and cut it out carefully.
  • You just have to straighten the finished product, so as not to snag and tear it.

On a note!! This is the easiest way to make a snowflake. Here the result depends on the selected pattern. The more complex the pattern, the more unusual and interesting the result will be.

DIY beautiful snowflakes (we make from paper)

I would also like to note that the more complex the ornament pattern, the more difficult it will be for you to cut it, so calculate your strength.

For you one more photo instruction for making New Year's crafts:


  • Make a diagonal fold. If you don't have a square sheet, then don't forget to cut off the excess. Next, fold the workpiece diagonally again.
  • The widest part of the triangle, that is, we divide its base into 3 equal segments. Bend one corner so that the edge ends at the level of the mark. It will be below the base, but strictly below the mark. Now we fold the second part and cut off the uneven ends.
  • Draw or cut out a snowflake right away.

I think, in general, you already have an idea of ​​how to carry out these simple structures and the difficulties in their manufacture should no longer arise. For you, there is still a video plot on our topic, and we move on to more complex options.

Volumetric snowflake. Cutting templates

To make a volumetric structure, you need to master the techniques of kirigami and quilling. Let's take a closer look at these two methods.

  • Kirigami paper snowflake


We will need: bright colored paper (the reverse side should be white or colored); scissors; pencil with ruler.

Manufacturing process:

1. Cut a square of colored paper of any size.


2. Fold it four times to shrink the part in four.


3. Make a diagonal fold.


4. Cut off the beveled corner from above.


5. Cut out symmetrical triangles at the outer side of the figure.


6. With scissors from bottom to top, make two cuts on either side of the sharp corner, as well as one more cut to the right or left.


7. Unfold the paper and smooth it gently.


8. Now bend the formed corners up or down at random.


9. Having folded all corners, iron the craft with an iron.


10. When placing the product, turn it as desired with the front or wrong side towards you.


When you have become familiar with this technique, I offer you templates of more original types:

  • like this for example


  • or such


  • maybe you will like this option


  • Snowflake in quilling technique

And this is a very painstaking work, but the result is the envy of everyone. Although, if you look at it, everything is done very simply.

  • We take a regular sheet of paper and use a ruler and pencil to draw the same lines. We cut the sheet into strips.
  • Take an awl and attach the edge of a piece of paper to the end of the awl. Now we wind the strip onto the tool.
  • Glue the end of the strip to the resulting coil and remove the roll from the awl. Make another such coil, but squeeze it lightly with your fingers on one side. Make five more of these droplet coils.


  • Take the first blank and glue six "droplets" to it.
  • Roll six reels again and squeeze with your fingers on both sides. We glue new details between the petals of the snowflake.
  • Take three strips and fold them in half, then cut them. You should have six short stripes. Twist six coils out of them. Glue a new spool onto each tip of the part.
  • We make six more coils from long strips, only slightly larger in size than the first one. To do this, do not tighten the paper tightly. We glue them on top between the small rolls.
  • You need to make six more large coils and bend their sides with your fingers so that you get a square. We glue them with their top to large coils.
  • We take a pencil and wrap a paper strip on it, glue the end of the strip and remove the coil. We glue this part to one of the tops of the snowflake and thread a ribbon or string into the ring.

Here is a diagram of how you can still glue the parts:

  • And you can also make such a three-dimensional 3D figure.

We will need: paper, scissors and a stationery knife; Scotch; glue; stapler.

Cooking process:

1. Make six identical squares out of paper.


2. Bend each square diagonally and make 3 cuts towards the middle on both sides. The cuts should not touch, leave 0.5-1 cm between them.


3. Unfold the sheet and lay it so that the non-cut edges are vertical. From the inside, you need to twist the two near edges into a tube. Glue with glue or tape.


4. Unfold the workpiece and connect the next two strips. Turn the part over again and connect the 3rd row of strips. Glue the last strips too, turning the blank over with the back side.


5. Do the same with six squares. Then fasten them in three pieces, turned to one side. Then we fix both parts into a volumetric figure.


6. If necessary, fix the parts of the product on the sides with a stapler or glue.


And one more workshop on making winter beauties:

How to make a snowflake from a roll of toilet paper?

It turns out that in order to make such crafts, it is not necessary to use ordinary paper, you can also take rolls of toilet paper. And the work process is very simple, you only need to take one roll, PVA glue and paints, you can use acrylics, or you can use gouache. For decor, take glitter, sequins, or confetti.


Now just cut the toilet paper roll into equal parts, give it a flattened shape and glue it. Decorate the top with the material of your choice.

Here are a couple more ideas for decorating roll structures:

  • use small and large parts


  • from above you can take different elements of decoration

  • or you can just cover it with gold paint


Schemes of paper snowflakes for the New Year

Now that you are familiar with different techniques for making this type of jewelry, I want to offer you diagrams and ready-made templates. Take, save, cut and create! Let the holiday always reign in your home.

  • scheme 1;


  • scheme 2;


  • scheme 3;


  • scheme 4;


  • scheme 5;


  • scheme for beading;

  • beauty from pasta.


That's all for me. I look forward to your comments. Good mood everyone! Bye Bye!

If you are preparing for the winter holidays, it's time to learn how to make a round snowflake with your own hands. Such decor can be used to decorate windows, cabinet doors, postcards, gift wrapping, from dense elements to make a garland, Christmas tree decorations or just cute openwork pendants on threads.

Choosing the size of the snowflakes

Before learning how to make a round paper snowflake, decide on its purpose and size. This will determine which sheets to buy for work, as well as the method of manufacture. Ordinary snowflakes are made from white office paper used for printing. Such decoration is performed with the help of scissors, with which a pattern is cut out on a blank folded in several layers.

If you need large snowflakes made of thick paper or cardboard that cannot be folded, you will have to use the technique according to a previously applied drawing (printed or made with a pencil, for example, on a stencil).

If you need very small snowflakes, and in large quantities, it is better not to suffer with cutting, but to buy with the appropriate cliche. High-quality tools will allow you to make decor even from fairly thick paper.

What is required

So, we have already figured out how to make a round snowflake: cut it out with scissors, a knife or a hole punch. Now let's decide on the materials and tools. Prepare the following:

  • paper;
  • scissors;
  • pencil and eraser if you are going to draw a pattern for cutting;
  • schemes (optional);
  • a compass (if you will make a blank for a snowflake with it);
  • hole punches with curly cliches (for small snowflakes).

In fact, thin paper and sharp scissors are enough to make a spectacular piece of jewelry.

How to make a blank for cutting

To understand how to make a round snowflake in stages, take an A4 sheet. Typically, paper is sold in a rectangular shape. To get a circle, you need square blanks. So, to create a blank for cutting, work like this:


In this sequence, blanks will be created for cutting different snowflakes.

How to make a round paper snowflake in stages

A blank for cutting a snowflake and it itself can be made in a slightly different way. The sequence of work is as follows:

  • Take a standard A4 sheet and lay it vertically.
  • Bend the lower left corner upwards to the right so that an isosceles triangle is formed from the sheet.
  • Align the lower right corner with the one located at the upper left.
  • Bend the resulting workpiece in half vertically Cut off the excess along the line.
  • Carefully cut the slits around the edge of the workpiece.
  • Make a pattern for the snowflake itself. Take the same as in the diagram below.
  • Expand the workpiece. If the folds are too much visible on it, gently iron the product with an iron through a sheet of paper.

Now you know how to make a round paper snowflake in two ways. It is not difficult to make a blank for cutting, although if you do not want to fold the sheets, cut off the excess, and you need snowflakes of a very specific diameter, you can work in another way.

How to make a beautiful round paper snowflake

This variant is carried out on the basis of a blank created with a compass. Work like this:

  • Draw a circle on the sheet.
  • Cut out the workpiece.
  • Fold it in half twice to make a quarter circle.
  • Do another fold (usually stop there).
  • If the size of the workpiece and the thickness allows, you can fold more.
  • Cut out the pattern. You can unfold the last fold (if the workpiece is too dense) and cut a few more small parts.

By experimenting with the number of folds, cut options, you can make an unlimited number of the most intricate products. If you are tired of working with scissors, you can use a hole punch with any cliche, even a standard round one. With its help, it is easy to get very unusual patterns of snowflakes.

Ready-made templates for cutting

In order not to think for a long time how to make a round snowflake of a beautiful shape with carved and openwork details, take any template that is in special periodicals for needlewomen. Typically, the diagrams are depicted next to the version of the finished product that will turn out according to this stencil. Redraw the template onto your folded blank. And if you want to make many identical snowflakes, it is better to make a stencil out of cardboard and trace it around on the workpiece.

Analyzing the found schemes, you must understand for cutting out which part of the circle they are intended. This will determine the number of folds that need to be done on the original workpiece. The illustration shows templates that are designed for 1/6 of the circle. This can be easily determined by comparing the circuit and the finished sample.

In the selection below, there are schemes for 1/12 of the circle. If your paper is thin, or you are working with foil, then the previous templates can be easily used for 1/12. All patterns are mirror-symmetrical, and therefore if you take only half, then fewer elements will be required to cut with scissors.

If you have a good imagination, and you do not like ready-made templates, you can combine your patterns based on the patterns you see.

Curly hole punches

We figured out how to make a beautiful large round snowflake, but it will not work to cut out a tiny blank from a sheet folded in several layers. If you need a lot of small snowflakes (up to 7.5 cm in diameter), you can buy a curly hole punch with the appropriate cliché. There are options for creating very miniature parts, for example, 5-6 mm. You can find different openwork cliches from different manufacturers. With these punches, you can easily and effortlessly cut a lot of snowflakes from both thin and thick paper. This pleasure is not cheap, but the result is obtained quickly and looks spectacular and realistic.

You have seen how to make a round snowflake with your own hands out of paper in different ways. Such options are suitable for working with foil, and for preparing templates for

Today we will talk about how easy and simple it is to cut beautiful snowflakes from paper yourself. Making a snowflake using the example of the schemes and templates given here will not be difficult even for a beginner!

So, let's look at how to correctly make a New Year's paper snowflake with your own hands.

What we need to do first is to find the right color and thickness for the paper. Cutting snowflakes will be much easier from thin paper: such paper can be easily folded and cut without much effort.

Of course, you can try to make a snowflake out of thick paper, but then instead of scissors it is better to use a sharp knife or, for example, a scalpel, in order to prevent the edges of the paper from moving when cutting.

But still, cutting New Year's snowflakes with scissors, in my opinion, will be more familiar and convenient. For cutting out the outlines of snowflakes, ordinary hairdressing scissors are suitable, and small details are best cut with miniature manicure scissors.

It should be noted that it is worth deciding in advance on the size of the paper from which we will cut the snowflakes. The optimal size, in our opinion, will be A5 sheets (this is half of the usual A4 landscape sheet).

After the suitable material has been selected, you can proceed directly to cutting out the snowflakes.

We tried to make some really beautiful paper snowflakes. This is one of the best we've got.

How to fold paper to cut paper snowflakes?

The diagram below shows how the paper can be folded for further cutting. classic snowflake with 6 rays.

Fold a sheet of paper to cut a six-pointed snowflake

As you can see from the diagram, a regular sheet of paper of the selected format is folded as shown in figure (b), then the excess part is cut off (figure (c)). Next, we unfold the folded paper and bend it along the dotted lines as shown in figure (d). The resulting shape (figure (e)) must be folded again along the dotted line and then cut off the excess edges. That's it, the paper is ready to cut snowflakes 🙂

There are other ways to fold a triangle to cut a snowflake. For example, a blank can be made as in the figure below.

How to fold a triangle to cut paper snowflakes

You can clearly see the whole process from folding a piece of paper to cutting out a beautiful New Year's snowflake from it in the videos below. Particularly intricate curls and fine slits are best obtained with a utility knife.

VIDEO: DIY six-ray paper snowflake

If you already know how to fold paper to cut snowflakes out of paper, then you can go straight to the templates for cutting snowflakes. You can start with simple ones. Examples of such templates are shown in the figure below.

Snowflake patterns

Do you want to know all the possible ways to fold a piece of paper to cut six-pointed snowflakes? Watch a special video, which clearly shows as many as THREE (!!!) such methods. Which one is better is up to you!

Three ways to fold paper for a six-pointed snowflake


In the following videos, you will learn how you can independently draw a pattern for cutting out a beautiful New Year's snowflake.

Applying a pattern for cutting paper snowflakes

How to draw a pattern on a snowflake

Paper snowflake with a pattern containing large elements

Patterns on snowflakes containing thin cuts (lines)

Patterns and patterns for cutting snowflakes

There are many patterns and templates for cutting paper snowflakes, examples of which we have already given. How can you cut a beautiful snowflake out of a folded paper triangle with your own hands using diagrams downloaded on the Internet? Everything is very simple!

Examples of schemes for cutting six-rayed snowflakes from paper

In the examples above, you need to cut the snowflake according to the diagram above so that only the white part remains, the black must be cut off.

By analogy, snowflakes are made, schemes and templates for cutting are presented below.


Here are examples of schemes for cutting a simple snowflake from paper









You can download even more patterns and templates for cutting out easy-to-make snowflakes from paper at the link - Download snowflake cutting patterns

Snowflakes made of paper: selected schemes, pictures of snowflakes
































Want to learn how to create your own Christmas snowflake templates? Need a program to cut a virtual snowflake out of paper, but don't want to bother learning it? And rightly so! After all, there is a funny service where you can cut snowflakes online - an exciting toy for your kid!

How to make a snowflake pattern in Compass-3D

Agree, a lot of time and paper can be spent on cutting out snowflakes blindly, from many freaks to choose at least a few normal ones. In order to carefully work out the shape of the snowflake before proceeding to carving it in nature, it is best to use some kind of CAD program.

Snowflake made of paper: we draw a diagram ourselves

Original schemes for making snowflakes can be created using computer-aided design systems. Let's consider this on the example of the KOMPAS-3D program.

Let's create a 3D model of our future snowflake. Open "File" - "New", select "Detail". First, we need to create a sketch. We draw two auxiliary lines in it, intersecting at the origin at an angle of 30 ° to each other, as shown in the figure below.

How to create a snowflake model in Compass 3D

Then another line can be drawn at right angles to the vertical construction line. The result is a triangular area bounded on all sides. In this sector, we have to draw the future template of the six-rayed snowflake. You can use the Point Spline tool to create various openwork elements and curls. As a result, you should get a snowflake pattern like this.

Sketch for cutting a snowflake from paper with 6 rays in the Compass 3D system

Now let's see how a snowflake cut in this pattern will look like. Select our drawing with the mouse and press the "Symmetry" button in the "Editing" tab.

How to create a template for cutting paper snowflakes

Now it remains only to select the resulting ray of the six-pointed snowflake, in the "Editor" tab, select the item "Copy" - "By circle". We indicate the center - the origin and 6 copies with a step of 60 degrees. It should look like the picture below.

The snowflake is almost ready

If you wish, you can display everything in 3D and get a better look at the resulting beauty. But in principle, everything is already perfectly visible, so there is no need to spend time on this. If you are satisfied with the result obtained, it is enough to save the template obtained above to disk in a suitable format, print on a sheet of paper of the required format and you can start cutting out the snowflake.

To make a snowflake template from a three-dimensional model, create a 3D drawing in Compass (Click with the mouse in the top menu "File" - "New" - "Drawing"), insert a view from this model into the document, select the appropriate scale and print on a printer.

Paper snowflake template from 3D model

Cut - and voila! Another beautiful snowflake is ready!

After playing a little with the NURBS curves of the above snowflake model in the Compass 3D program and slightly modifying the external shape of the beam, we get another beautiful snowflake, from the model of which we can again create a ready-made template in a matter of minutes.

Of course, using a CAD program to make paper snowflake templates is not the easiest option. But do not be upset, because there is an intuitive and simple program for drawing snowflakes - the Snowf graphic editor, which even a child can use. When drawing a pattern in this program, you do not need to draw any axes, mirror something, etc. - everything is done absolutely automatically. The intuitive interface allows you to master the program in a matter of minutes. To draw snowflakes, you just need to move the mouse and watch the pattern change on the screen.

Other options for making snowflakes

Snowflakes made using a hole punch look original. Making them is easier and faster than cutting intricate patterns.

First, we pierce the workpiece in several places.

After that, using scissors, we connect the resulting circles to each other. Below are some examples of paper snowflakes. executed in this way.

To cut out such multi-beam snowflakes, the paper sheet is folded according to the scheme, which is clearly shown in the article (see Blank No. 2).

As you can see, cutting a snowflake with your own hands is not so difficult, you just need to turn on your imagination! 🙂

The schemes and video tutorials given in this article will help you and your children learn how to cut amazing New Year's snowflakes, which will bring a holiday atmosphere into the house and will delight the eyes of others!

Or is also a very popular decoration for the New Year.

How to make 3D paper snowflakes? Watching the video!

Do-it-yourself beautiful 3D paper snowflake

Volumetric 3D snowflakes made of paper. 3D Paper Snowflakes

Awesome quilling paper snowflake!

They turn out to be truly delicate, which look very unusual and creative! Also, colored volumetric snowflakes can be assembled from individual multi-colored modules (read a master class on making New Year's snowflakes using the modular origami technique).

And with a little imagination and imagination, you can make amazing 3D snowflakes!

How to cut a snowflake correctly and beautifully

DIY paper snowflakes

Paper for cutting snowflakes, you can take office, colored paper for children's creativity, origami paper.

With ordinary office scissors, it is convenient to cut out relatively large areas of the pattern, for example, along the edge of a snowflake.

For small details and intricate patterns, it is best to use hairdressing scissors and nail scissors.

DIY snowflakes

So, paper and scissors are selected, now you can proceed to the first stage of making snowflakes - folding the paper. To get a hexagonal blank, from which a snowflake will subsequently be made, cut a square of the desired size from a sheet of paper.

How to get squares of different sizes from A4 sheet

1. Fold a piece of paper in any way, but so that one part is larger than the other, and then cut along the marked line.

2. Fold most of the sheet along the bisector.

3. Cut off the excess paper - you get a square.

4. The blank for a large snowflake is ready.

5. Repeat steps 2-3 with a smaller part of the sheet, the remaining aftereffects of step 1.

6. The result is a blank for an average snowflake.

7. With the trim remaining after step 6, repeat steps 2-3.

8. The result is a blank for a small snowflake. Thus, from one A4 sheet, you can make blanks for three snowflakes of different sizes.

The dimensions of the blanks may vary slightly. They depend on how the original sheet was folded in step 1. In addition, a large snowflake can be obtained by cutting out a square from a whole A4 sheet.

How to fold a hexagonal blank from a square

Now from the square we need to add a regular triangle (in expanded form - a hexagon), from which the snowflake will be cut.

Method number 1

1. Fold the square in half.

2. Then fold the sheet "by eye" so that the angles shown in diagram 3 are equal.

3. Turn the workpiece over to the other side.

4. The fold should go along the edge of the workpiece folded at point 2 of ply, and the top edge should line up with the left fold.

5. Cut off excess paper evenly.

Method number 2

1. Fold the square diagonally.

2. Mark the middle of the leg of the resulting triangle (side).

3. Connect the apex (right angle) of the triangle to the marked midpoint of the leg. Mark the fold line and again unfold the workpiece to a triangle.

4. Now sketch out the midpoint of the base of the triangle.

5. Connect the middle of the leg to the point that lies on the marking line obtained in step 3. The fold line should go through the middle of the base of the triangle.

6. Connect the base of the triangle to the fold line obtained in step 5.

7. Cut off excess paper along the indicated line.

Advice

Choose the size of the hexagonal blank (large, small or medium) yourself based on the paper you use for cutting, the complexity of the snowflake and the skills of working with scissors.

Cut out the snowflake

1. Fold the regular triangle obtained in one of the above ways (in the expanded form of the hexagon) in half. Perform all actions very accurately so that later you do not cut through the folded crooked layers of paper with scissors. Make sure that the top circled in a circle (see diagram) is in the center of the future snowflake.

2. Start cutting. On the diagrams, areas of paper that need to be removed are indicated in bright pink. First, shape the outer edge of the snowflake. To do this, cut a pattern on the upper side of the workpiece, as shown in the diagram.

3. Then cut a pattern on both sides of the workpiece. The last to be cut are small elements inside the workpiece and around an acute angle.

4. The snowflake is ready, it remains only to carefully unfold it.

We will cut out all the presented snowflakes according to this description, starting from point 2, when the regular triangle is already folded in half. The fact is that all snowflakes are cut out the same way, only the pattern changes, so we did not repeat the description of the work many times, but limited ourselves to precise diagrams.

The process of making each snowflake consists of 3-5 sequential diagrams, in which the sections of the paper to be removed are indicated in black. The last diagram, which shows a snowflake completely cut out but not yet expanded, is also a template. You can “by eye” draw a pattern from it onto your workpiece, or translate it using tracing paper and copy paper.

Advice

The snowflake should look like a graphic image with a well-readable pattern, so perform all stages of the work very carefully and accurately.

Snowflakes. Schemes

Such snowflakes will become beautiful decoration of the New Year's interior.