How to cut a dress with a silhouette. A-line dresses are the perfect solution for any body type! Breast duck modeling

At one time, the style of the dress, invented by the great Yves-Saint Laurent, made an extraordinary sensation. Replacing the tight-fitting silhouette that has long been in demand in the fashion world, the free cut of the trapeze has moved away from the repetitions of the female body. Nevertheless, the image of a woman was not lost in the abundance of fabric and did not begin to resemble a burqa designed to hide the seductive curves of a female figure. Thanks to the image from Yves-Saint Laurent, the dress only emphasized the extraordinary femininity and even some girlish helplessness of its owner, thereby giving free rein to the male imagination. The first, they are also classic, models of a-line dress, which appeared in 1957, were dresses without sleeves, with an A-line, without a hint of a waist line. We will show you a popular pattern for creating a stylish trapeze dress!

But despite a good segment since the birth of the style, the relevance of the dress has not been lost to this day. It is still popular with women, including because of its uniqueness: in summer versions, the dress is sewn from airy, flowing fabrics, in winter - half-woolen warm models will look great.

Today's variability of the classic model will not leave indifferent any fashionista. During this time, the trapezoid has changed and went beyond the classic model: sleeves appeared, the waist was designated, and the fashion for length changed several times.

In the 40s and 50s, a length slightly below the knee was preferred. In the 60s, women became bolder and opted for a minimum dress length. In the 70s, flower children lengthened the skirt to the floor.

Learning to independently create patterns for trapeze dresses

The current length depends solely on the mood of the owner: from the defiant mini to the strict maxi.

The cut of the dress can also be with options, thanks to which it is worth paying attention to girls who want to hide the flaws of their figure. For obese and pregnant women, the trapezoid will become an assistant hiding the volume of the figure. Depending on where the expansion of the dress begins, different tasks of draping problem areas are solved. If the trapeze starts from the armhole, almost near the shoulders, then the dress will help hide the waist or rounded tummy. If the extension starts from the waist, then you can divert attention from the overly wide hips.

You can complement an elegant outfit with a thin turtleneck, worn under a dress, or an elegant jacket, which will perfectly fit into an office style.

Various prints and bright fabrics will not need additional embellishments, as they are good in and of themselves. But if you add them with bright accessories, then a memorable image of the hostess will be provided.

British supermodel Twiggy, popular in the sixties, is still the most famous admirer and lover of the trapezoid style (see photo). And you can trust her because she was the style icon of her time. All women of fashion were equal to her and imitated in everything: from transparent thinness and short haircuts to clothing preferences.

As mentioned above, the style of the dress is universal for any type of figure and is suitable for different age categories: for both women and girls. And to show off in a new thing, it is not necessary to search for the right thing in clothing stores. It is enough to set a goal and then you can sew a beautiful dress yourself.

There is an option to use ready-made patterns, which today can be downloaded from any site, but we propose to build it yourself, especially since the pattern is simple and even a novice craftswoman can handle it. At the same time, it does not even matter for what time of the year the dress is sewn and whether it will have a sleeve: the same pattern is used in both the first and second cases, and the sleeve pattern is built separately.

The pattern of the trapeze dress is built like a regular pattern, with the separation of individual measurements. The good thing about a trapeze is that it doesn't need darts for the waist.

From these drawings, you can make different models of a-line: classic A-silhouettes, with different skirt lengths, and a boat dress, with a characteristic neckline.

For the summer version, you can do even easier: just take your T-shirt, circle it on the fabric, add seam allowances and expand it downward, and the pattern is ready.

Such a dress will look both independently and with an additionally dressed belt.

The richness of the texture and color of the fabric, of course, is the preference of the fashionista. As for fabrics, it is advisable to choose flowing, well-draped materials - they will add their own touch to the future image of a girl.

Be trendy, be stylish, and be talented.

Related videos

In order to consolidate the material and finally make sure of the possibility of self-tailoring a dress, we present to your attention a video:

Dress or A-line sundress - the perfect solution for any type of figure! Modern models of women's dresses are striking in their variety. But how to choose your ideal style, which will not only hide figure flaws, but also emphasize its advantages? Dresses and trapeze sundresses are a unique solution for women of all ages and builds.

What is a trapezoid cut?

The name of the style speaks for itself. After all, its pattern is made in the shape of a trapezoid, the narrow part of which is directed upwards. This design solution allows you to visually adjust the figure, giving it a feminine outline. Today you can find various variations of styles on the theme of the trapezoid. It can be both classic styles and casual models. But all of them are united by practicality and ease of wearing. Therefore, if your collection does not yet have a sundress or a-line dress, it's time to buy it. After all, in it you will always look fashionable and modern.

Dresses and sundresses-trapeze also fell in love with pregnant women. After all, its loose cut does not hinder movement and gives the image an elegance. And this is exactly what is needed while waiting for a child.

Sewing material

This trendy cut can be made from almost any fabric. However, the most popular models of world designers are made of linen, dense knitwear, cotton or staple. The choice of material depends not only on the season, but also on the entire image as a whole. It's good if your collection includes sundresses and trapeze dresses made of different fabrics and designed for different occasions. After trying on this wardrobe item once, you can no longer refuse it.

With what to combine a fashionable trapeze dress or a sundress?

The choice of accessories for this model will depend not only on the situation, but also on the material from which it is made. So, linen sundresses, trapeze dresses are perfectly combined with jewelry made of wood or natural stones. At the same time, both flat and wedge shoes are welcome.

Dresses, trapeze sundresses made of thick drape or knitwear, which are usually worn in the demi-season, are usually worn with high boots or ankle boots. From outerwear, you can give preference to a raincoat or an elongated fur coat. If you have purchased a summer dress made of staple or thin cotton, then you can safely combine it with sandals and bright jewelry. The main thing is that the whole outfit looks harmonious in color and style.

Today, lace a-line dresses, which are lined with lightweight fabric, are very popular. Wearing such a model, you will get a very gentle and romantic look. In this case, it is worth giving preference to pastel and any light colors. Indeed, this season, the most popular are calm colors.

A-line dress styles for slender girls

The owners of ideal proportions, it would seem, do not need to choose a trapezoid style. However, you should not immediately write off this model. After all, with the help of a dress that is flared at the bottom, you can perfectly diversify your wardrobe and impress others. A-line dress with sleeves or sleeveless for slender girls can be either short or mid-knee length. In this case, it is worth focusing on the details. For example, choose bright high-heeled shoes that accentuate slender legs. A-line dress goes well with wide-brimmed hats and massive jewelry. But remember that only thin girls can try on such accessories.

A-line dress style for full

A pear-shaped cut will be an excellent choice for overweight ladies. After all, a sundress or a-line dress hides figure flaws and visually slims. In this case, you should pay attention to monochromatic models and a large print. If you cannot boast of the ideal proportions of the legs, then choose a model up to the middle of the knee. However, in this case, heeled shoes will be a mandatory component. You can also try on long trapeze dresses. But do not choose a cut that is too wide. The hem of such a dress should be no more than shoulder width. Otherwise, you get the image of a very obese lady.

Sundress, trapeze dress: do-it-yourself pattern

Today, many people sew clothes with their own hands. The trapezoid style, the pattern of which is very simple, can be created at home. To do this, you need a piece of fabric equal to the length of the future product. Of all measurements, you only need chest girth. According to the diagram below, you should make a marking on your piece of fabric.

Modeling the pattern of the trapeze dress.

You can independently adjust the width of the dress, as indicated in the diagram. But don't forget about the darts in the chest area. After all, it is they who make the style of the dress feminine, and not like an ordinary bag. If you are interested in the pattern of a trapeze dress with sleeves, then you can take measurements from any T-shirt that fits you well. This method works well for those new to sewing.

If you are using knitted fabric, your sewing machine should have a special stretch fabric foot.

The seam should be processed along the shoulder line and along the entire length of the product. If the fabric crumbles heavily on the cut, then it must be processed on an overlock. As you can see, a sundress and a-line dress, the pattern is very simple, it can be created in just half an hour. At the same time, you will receive a unique product that cannot be found in any designer collection in the world! You can decorate the dress with a brooch or other accessories, depending on your look.

A-line dress - such a beloved image of the incomparable Audrey Hepburn - has not lost its popularity for several decades. The secret of this style longevity is that it suits almost everyone. And, if you want to emphasize your figure or, conversely, hide flaws, you need an A-line dress. The pattern must be selected and executed accurately - this is the secret of success.

Why a trapezoid?

The style of the dress is so called because it is narrowed at the top and widened towards the bottom. This cut is especially suitable:

• very thin women (the flared hem hides skinny legs and thin hips);
• full ladies (hides imperfections and "excess" of the figure);
• pregnant (allows you to hide the growing tummy from prying eyes, while not hindering movement).

And women with an ideal figure appreciate this style because it emphasizes all the strengths of their body: chest, hips, legs.

An important advantage of a trapeze dress is that it is universally suitable for any occasion; you can dress up in it both in the office and for a social event. In addition, the style goes well with various accessories and shoes (both on a stiletto heel and on a low run).

Choosing a fabric

In the wardrobe of any fashionista, you can easily find several dresses of the same style, but made from fabrics that are different in texture. And it is very likely that these will be A-line dresses. After all, you can sew them from:

• flax;
• cotton;
• staples;
• dense knitwear;
• semi-wool.

It all depends on the time of year and the woman's image. The main condition is that the fabric should keep its shape and not stretch too much, otherwise the dress will begin to sag and will look inelegant.

Pattern for beginners

If you are a beginner, it is best to start by sewing a sleeveless A-line dress. It will also become the base model for other clothes of this style. Just a few hours and you can show off a great outfit!

Instruments:

• graph paper;
• simple pencil;
• scissors;
• tape measure;
• a piece of fabric (the length is equal to the desired length of the product).

Instructions:

1. We measure the girth of the chest and divide it by 4.
2. On the paper along the top edge we mark this value.
3. We measure the length from the shoulder to the armpit.
4. Make a mark on the paper and draw a perpendicular from the first mark.
5. We measure the girth of the waist, divide by 4, put a dot on the paper on the left.
6. We measure from waist to chest and mark with a dot on the perpendicular line.
7. We connect the point to the waist point. It turns out a trapezoid.
8. Draw the neckline of the desired depth.
9. Now we mark the length of the dress.
10. Draw a line from the waistline to the bottom, expanding it to the desired length (it is optimal to add 6-7 cm to the value of the half-girth of the chest).
11. We draw exactly the same drawing for the front of the product.
12. In the second picture, we make a dart. To do this, from the beginning of the neck to the bottom of the armhole, draw a line, adding 5 cm, put a point.
13. From a point to a side cut, draw an isosceles triangle with a base of 2 cm.
14. Cut out the drawings and transfer all the lines with chalk onto the fabric, folded in half with the wrong side up.
15. It remains to sweep the parts and sew them on a typewriter, having processed the neckline and seam cuts.

A-line dress with sleeves

If you are sewing an A-line dress with sleeves, it is better to make a one-seam sleeve. Consider a drawing of a sleeve for a basic model of such a garment.

Instructions:

1. We measure the length of the sleeve. To do this, we bend the arm at the elbow and measure the length from shoulder to elbow and from elbow to hand, add the values ​​- this will be the length of the part.
2. We postpone the resulting value on paper.
3. We measure the circumference of the arm, adding 10 cm (if you plan to make the sleeve not too wide).
4. Putting the segment aside on paper. Draw 2 perpendicular lines along these points.
5. Set aside 15 cm from the top line. This is the descent line. We draw a horizontal line.
6. Divide the width of the sleeve in half and draw a vertical line.
7. From the highest point to the extreme points of descent, draw a triangle - it turns out to be isosceles, divided into 2 rectangular.
8. We divide each half in half again and draw a vertical line across the entire length of the drawing.
9. From the right edge to the first vertical line, draw an arc downward, which deviates from the side of the triangle by 2 cm.
10. On the left we draw the same arc, but with a deviation of 0.5 cm.
11. To the right from the middle of the right side of the triangle to the top point, we make an arc upward with a deviation of 1.5 cm.
12. On the left, the arc deviates by 2 cm.
13. We direct the line of the armhole. Cut out the detail. The right side refers to the front, the left to the back.

On the basis of this drawing, you can make a pattern for a trapeze dress with sleeves 3 4. To do this, you should postpone the first vertical segment of the required length, and perform all subsequent actions in the same order. By the way, experienced dressmakers recommend making a drawing of a long sleeve, and then just bend the lower part to the required level. And one more nuance: in order to neatly sew the sleeve into the armhole, it is recommended to plant it a little along the shoulder seam.

Fashionable outfit on a yoke

If you want to make the dress more original, use the dress pattern on the yoke. True, such a model requires certain sewing skills.

Instruments:

• graph paper;
• simple pencil;
• scissors;
• pattern;
• tape measure;
• tailor's chalk (or a bar of soap);
• a piece of fabric (the length is equal to 2 lengths of the finished product).

Instructions:

1. We measure the length from shoulder to chest and from shoulder to mid-shoulder. We measure the circumference of the chest and divide the measurement in half.
2. Draw a rectangle using the obtained values.
3. Draw a shoulder line.
4. On the right, we round the neckline to the desired depth. To do this, you can use a pattern.
5. We measure the length of the armhole and put a mark on the left.
6. Now, above and below the shoulder, set aside a segment of the length of the armhole.
7. We round this line, making it 3 cm deeper in the front than in the back.
8. We cut out the rest of the details. The half-girth of the chest is the length of the upper line of the trapezoid.
9. We draw a line of the length of the dress. Now set aside 6-7 cm to the right to expand the skirt. We finish drawing the trapezoid.
10. If the style requires it, we cut out the sleeves.
11. Cut out the details and transfer them to the fabric.
12. We sew and after trying on we sew on a sewing machine.

The pear-shaped figure is very feminine, but sometimes it brings the owner some difficulties when choosing a ready-made dress due to the difference in the girths of the hips and chest. Don't be upset. First, let's figure out which style to choose. We narrow the bottom and focus on the upper part: a boat-shaped neckline, a large collar, a neckline, a bright print in the upper part of the dress, the bottom can be slightly flared, do not forget about the use of contrast inserts that go along the dress and visually shape the figure, as well as a little High waist, heels and tights to match the shoes will make you slimmer. We try to avoid decors in the area of ​​hips, patch pockets, draperies, cross stripes and large prints.

photo from the site, http://www.chieflady.com/

For an example of modeling, we will choose a simple sheath dress created on a pattern based on an adjacent silhouette. The style is interesting in that the model lines that form the silhouette are the best and most advantageous demonstration of the female figure of the lower type. Dark inserts running along the side seams will help to visually hide the width of the hips, and a white, broadening silhouette will highlight the slimmer silhouette. But, here it is impossible to be too clever with excessive narrowing of the skirt and if the difference between the girths of the chest and hips is large, it is better to widen the skirt a little towards the bottom.

photo from the site http://www.stylishwife.com/

Modeling. On the details of the pattern of the back and shelves, draw model lines of reliefs passing from the armholes to the bottom of the dress through the waist darts, on the back, transfer part of the solution to the middle line of the back, for the best fit in this area. Open the bust dart in the armhole, read more about the transfer of darts, read It remains only to outline the allowance for the slot. If the difference between the waist and hip girth is large and the solutions of darts for fitting are more than 3-3.5 cm each, the dart must be split into two, otherwise ugly creases in the waist area will appear in the finished product.

In the second version of modeling, we propose to expand the skirt to the bottom, make it the so-called A-shaped silhouette, you can also make the dress cut-off at the waist.

MODELING A DRESS FOR THE INVERTED TRIANGLE FIGURE

Your strong point is narrow hips and long, slender legs. We focus on them. All decor, bright prints - down to the skirt. Reducing the width of the shoulders, here raglan sleeves will help us, or the absence of sleeves at all in summer clothes, a dress with a strap on one shoulder, a Greek silhouette, a loose tunic, a dress with a tulip skirt can become a lifesaver and be loved in your wardrobe. You can afford to wear fluffy wide skirts, skirts or trousers with a peplum, straight cut dresses, but not too voluminous and wide, with vertical seams or trim.

photo from the sites http://refinedstylefashion.com/ https://ru.pinterest.com/pin/454089574910263523/ http://stylowi.pl/

As an example, we will analyze the modeling of a pattern of a simple dress suitable for this type of figurus. The model has a fitted sleeveless bodice and a tulip skirt that adds volume to the hips. The dress is cut off along the waist line, on the front panel of the skirt there are two opposite folds, on the back panel of the skirt there is a slit.

photo from the site http://snowqueen.ru/

We will start modeling by applying the basic pattern of the adjacent silhouette to the relief lines on the details of the back and the shelf (if you want a greater fit or the fabric is knitted, you can use the base pattern of the adjacent silhouette). We will arrange the thallium darts on the front panel of the skirt in folds - cut the skirt part from the end of the darts vertically downwards, move the parts apart so that in the upper part we obtain a solution approximately equal to 6-8 cm to form deep counter folds. At the bottom, keep the volume of the skirt in its original form.

MODELING A DRESS FOR THE HOURGLASS FIGURE TYPE

The "hourglass" type of figure is the most feminine, it is he who is rightfully considered a standard for imitation and we try to bring our figure closer to it, at least with the help of clothes. Lucky women with this type of physique. The main advice is to focus on the waist, so you will further emphasize your femininity and sexuality. Neckline, bows, pencil skirts, stilettos are your win-win look.

photo from sites http://www.asos.com/ https://ru.pinterest.com/NatalieYoung29/

Let's simulate such a simple dress, in two versions.

photo taken from sites

The model is quite simple at first glance, but with the right choice of fabric and accessories, it is very effective. For modeling, we need a pattern for the base of an adjacent silhouette and a pattern for a sleeve. Cut-off dress along the waist line, the skirt is widened to the bottom. The darts for fitting the chest are transferred into the neckline: in the first version, the darts from the neck are stitched with an allowance outward, a small sleeve with a fold, in the second version, the darts on the chest are distributed in folds extending from the neckline, there are no sleeves.

Modeling. 1 step - on the details of the back, the dart for the roundness of the shoulder can be neglected, because the neckline of the back is deep enough and widened, but the size of the solution must be removed from the length of the shoulder so as not to upset the balance. For the convenience of modeling, we will transfer the dart on the shelf to the armhole. Cut the details of the skirt pattern lengthwise from the darts down.

Next, step 2 of the simulation. Draw a new line for the neckline according to the sketch. We will transfer the tallium dart on the shelf to the neckline, we will also transfer the dart from the armhole there. Read more about translation of darts. When designing a detachable adjacent silhouette, the pattern of the part of the shelf must be lowered in the waist area by 1 cm, this will give a better fit and prevent it from jerking when finished. Skirt. We connect the parts of the pattern obtained after cutting the details of the skirt, so that the darts open to the bottom. Correct the side cuts and the bottom of the product.

Sleeve modeling. The sleeve base pattern can be taken on our website. First, let's shorten the length to the required one. With the help of vertical cuts going from the ridge to the bottom of the part, and the subsequent spreading of the parts of the pattern, design the opposite fold.

In the second version of the dress, the darts on the shelf are transferred into folds extending from the neckline. We will consider modeling below.

MODELING A DRESS FOR THE "OVAL" FIGURE TYPE (APPLE)

The figure is an oval (apple). In the era of Rubens, women with this type of figure were the ideal of perfection. The silhouette is visually close in shape to the letter "o". The strategy in choosing the right clothes will be to emphasize, accentuate the waist, this can be done by choosing a dress that slightly expands to the bottom, as well as the use of belts, decorative inserts that make the waist visually narrower, the top of the dress should be slightly widened, for example, use a V-neck, collars ... Sheath dresses, smells, low waist, A-line dresses will suit you.

photo from the sites http://yourmothershouldknow.tumblr.com/ https://ru.pinterest.com/buyerselect/ https://ru.pinterest.com/nordstrom/ http://dresses-photo.ru/ http: / /jenskie-hitrosti.ru/

As an example, let's take a look at this dress. It is interesting because it has a contrasting decorative line running along the dress. Visually, this is very stretching the silhouette and slimming. In addition, the dress is loose in the waist area and slightly widens towards the bottom, which is undoubtedly a plus for this type of figure. Clear cut lines and the choice of fabric that holds its shape create the desired image and collect the figure as a whole. To model this model, we will use a basic sewing pattern of an adjacent silhouette for a better fit.

photo from the site

The female figure is a rectangle type. For modern models, it is the most typical. Therefore, when buying ready-made clothes, usually there are no problems, but sometimes you really want something special! This is where our modeling tips and patterns can come in handy!)) Women with this body type do not need to try to look like Merlin Monroe or Sophia Loren, this is not your style. Dresses and clothes in the image of Twiggy, Kate Moss, Nicole Kidman and Coco Chanel herself are what we are striving for.

photo from sites http://ouiliviamoraes.com/ http://my.goodhouse.com.

Modeling takes place on the basic pattern-based dress of a straight silhouette, without darts. To begin with, we will get rid of the dart on the back, on the shelf we will complete the depth of the fold, setting aside a distance of 12-15 cm from the middle of the part.Please note that one opposite fold is laid on top of the dress, while at the bottom there are two of them - one-sided, the depths are laid towards the side seams. The side seam lines are designed to create an oval silhouette. This model should be long above the knee, otherwise there may be excessive narrowing at the bottom.

Well, our lesson has come to an end, we have learned how to create simple dress patterns based on the basic pattern, such that beginners can handle modeling and sewing, and talked about the types of figures. I think now you can please yourself with a new thing. Good luck and creative mood!

The history of women's dress is rooted, as they say in such cases, in the thickness of the centuries. Over time, the dress changed, the length became different, the options for finishing, one style came to replace the other. Only one thing remained unchanged - that with the help of this decoration a woman always managed to look unsurpassed and magnificent.

A-line dresses are very popular and fashionable these days. The triumphal procession of this seemingly uncomplicated style began in the 60s of the twentieth century. The dress is characterized by simplicity of cut, it is, as a rule, not very long, rather loose, looks good on any figure, hides its fullness with invariable success. It is not difficult to build a pattern for such a dress, so every modern girl or woman can sew such a trapeze dress for herself with her own hands.

We create a pattern for our future dress

Of course, you can download a trapeze dress pattern on the Internet. However, it is much more pleasant and interesting to do everything with your own hands. What will we do soon.

It is believed that designing clothes is a very complex process. This myth is supported with special pleasure by professional fashion designers who do not want to lose clients.

However, we do not need any special knowledge or skills to construct a pattern for a trapeze dress. It will be quite enough if we have at our disposal a scheme - the basis of the dress. It should show the dart of the chest, waist, and so on.

First, you need to move the outline of the diagram onto a blank sheet of paper. For this, wallpaper remaining after repair is also suitable. When redrawing the drawing, the waist dart does not need to be transferred, we will not need it in our work.

Now we draw a line, it should pass from top to bottom from the bottom point of the shoulder darts. Then we will cut this line, we will close the darts, and the lower part will expand at the same time.

Now we start building a breast dart. It is not required to transfer it, especially if we have a large enough size. We keep it where it is, and oblique lines must be drawn from the point of the armpits. If the breast size is small, then we will also make the breast dart closed.

Since the style of our dress is summer, our dress will not have sleeves. You need to provide a fastener on the neckline; you can place it anywhere - in front or behind.

How to cut a trapeze dress

When cutting parts of the future dress, you should be careful and punctually follow the advice of specialists. After the cutting is done, we should have the following details of the future dress. In front of the dress itself there is one detail, the back is also exactly one detail. Another detail will be the facing of the front neckline. When cutting fabrics for sewing a trapeze dress, do not lose sight of the fact that it is necessary to maintain allowances for the seams. In the lower part we allow three centimeters, in the other parts - one and a half centimeters everywhere.

How to sew an A-line dress

If you did not make any mistakes when constructing the pattern and cutting the fabric, then it will not be difficult to sew a ready-made summer dress from the parts received.

On the back, you will need to sew a zipper, for this, the place where the fastener will be located is reinforced with thermal fabric, a narrow strip of one and a half centimeters wide and the same length as the fastener will be enough. After that we sew in the fastener itself.

On the front part of the product, we sweep and grind the chest darts, the seams must be ironed down. Then we grind the side and shoulder seams, while the fabric allowances should be processed and smoothed. Finish the neck of the model with thermal fabric, grind it along the shoulder seams and put it on the neckline at the neck. Then we grind, the remaining allowances will need to be cut off, turned out and welded, and then smoothed out.

The bottom of the dress is sewn with a seam on a sewing machine. It remains to iron our product and you can put it on.

As promised earlier, we present several ready-made patterns for this dress.

Size (GOST)	Height, cm	Chest girth, cm	Waist girth, cm	Hip girth, cm	Download pattern
42	168	84	65	92