Encyclopedia 

Crafts from paper bat. Paper bat. Master Class. From black paper

The bat is called the "flying vampire" because they fly at night, prefer to sleep in dark caves and love to feast on small animals. But a bat made in paper origami style will be a completely harmless animal. They will decorate any themed party or the increasingly popular Halloween holiday. It is better to choose paper in black or dark gray colors, so the craft will look very impressive. There are several assembly options. In this master class, one of the options will be shown. The numbered diagrams show the assembly process in detail.

We collect a paper bat with our own hands in a step by step lesson

  1. Fold a square sheet of paper in a triangle.
  2. We wrap the corners to the bottom and level the resulting bat blank.
  3. Make cuts with scissors from the center to the middle of the folds
  4. We fold the triangles that have turned out inward.
  5. Bend the left wing of the mouse.
  6. Bend the right wing in the same way.
  7. In fig. 8 we make a head.
  8. Figure 9 shows only the top of the bat and make small cuts along the edges of the upper part.
  9. We bend by the valley.
  10. This is the end result. The origami-style bat is ready.

Halloween bats decoration.

Such bats will perfectly create a festive atmosphere on Halloween.

For such a decoration you will need:

  • Black paper
  • Scissors
  • Double sided tape
  • Threads
  • Simple pencil or printer

We print out the bat patterns below or just sketch.

Cut out and place on windows, walls or doors on double-sided tape. For greater effect, you can hang them on a chandelier or make them in the form of a garland.

Packaging for a chocolate bar for Halloween.

A bat can cause not only dislike, but also pleasant emotions, because it will bring a sweet gift in its paws. On scary Halloween, you can make an original packaging for a chocolate bar or a large candy.

For a sweet surprise you will need:

  • Bat pattern
  • Sheet of black double-sided cardboard
  • Small ready-made eyes
  • Scissors
  • Double sided tape
  • The chocolate you want to give

1.First of all, print out the bat pattern, place it on top of the black cardboard and carefully cut it out.

2. Attach one pair of eyes to the workpiece with glue. And glue the chocolate bar in the middle with double-sided tape.

3. On the wings of the bat, attach a small piece of tape and wrap one wing on top of the other. This creative packaging will surprise all guests at the party.

Let's make a bat from egg paper trays with our own hands

You can make an amazing Halloween craft from egg trays with your own hands, it is done in a couple of minutes. Of the materials required, in addition to egg trays, black paint, scissors and a pair of ready-made eyes.

For one mouse, you need to cut 3 cells from the egg tray, paint them with black paint. On the cell in the middle, this will be the head, we glue ready-made eyes for toys. You can buy them at any hobby or craft store. Make a small hole on top and thread a narrow ribbon of a contrasting color there. A very original decoration is obtained.

Bat made of paper toilet rolls for Halloween:

Toilet rolls are an excellent material to make your Halloween bat craft. The photo shows the assembly idea. For the body of the mouse, we use a roll, previously painted over with black paint or pasted over with black paper. We cut out the wings from colored cardboard or paper. We glue or draw eyes, mouth and ears. We hang the finished bat around the room by its paws. You can put sweets and sweets inside and glue the top and bottom.

Related videos

Few have seen the bat: it is active at night, flies like a rocket, sleeps upside down. These qualities have always frightened people who came up with many tales about these animals.

For the sake of fairness, we must admit: the first time you see it, you can get scared. I remember my first meeting with bats in one of the caves of the Caucasus Mountains. A huge colony hung under the roof of the cave, clinging to the limestone ledges and squeaking. It was somehow uncomfortable, although most bats that feed on insects and fruits are harmless and safe for humans

A craft in the shape of a bat can look interesting for kids if it is made of glossy black and golden paper. It is also better to use plastic eyes to "liven up" the paper product. And to draw small details on the dark color of the elements, use a white marker. So let's get started!

Necessary materials:

  1. glossy black and gold paper;
  2. black chenille wire;
  3. plastic eyes;
  4. hole puncher;
  5. scissors;
  6. glue;
  7. pencil and ruler.

Manufacturing steps:

1. For the body of the bat, use a sheet of black glossy paper, from which we cut out a rectangle 12 x 7 cm.
2. Twist neatly a black sheet of paper into a small tube. We fasten the ends with glue.
3. Then we also create the ears from black paper. Therefore, we draw two paths in the form of triangles.


4. We attach the ear details in the form of small triangles to the top of the tube. But it's better to glue them inward to make them look neat.

5. Then take the golden paper and draw two wings for the bat. We carefully cut out every detail. Especially in places of bends.

6. Glue the cut-out golden wings cut from glossy paper from the back on the sides.


7. To create the legs of the night hunter, we use black chenille wire. Create two long lines and two pairs of short ones.
8. Attach two short ones to one long piece of black wire.

9. Now create two holes with a hole punch in the lower part of the craft for the chenille wire legs. Better to do this in the background of the straw!


10. Gently attach the fluffy wire to the paper craft. We fix it by scrolling part of the wire.

11. Attach the plastic eyes, draw the mouth with a white marker. On this, the bat muzzle is ready!

We attach the legs of the bat to a twig or any other thin material so that it can hang head down. On this, our craft from paper and chenille wire is ready and looks like a bat. With a child, you can come up with many stories with such a night dweller.

Now your child will know exactly what this mistress of the night looks like. The craft can become part of an environmental project in a kindergarten. The site Unusual Children wishes creative success to its readers.

Despite the fact that this holiday has migrated to us relatively recently, it is also loved and celebrated here. For Halloween night, it is customary to dress up in costumes and decorate your home. Today we will look at manufacturing options very simple and fast bat paper craft- volumetric and in origami technique.

Such a figurine can be used to decorate a room or give it to friends.

To make crafts, we need:

  • A sheet of black paper, some white paper;
  • Pencil;
  • Scissors.

Making such a craft is very quick and easy, so it is perfect for classes with children.
For work, it is better to choose paper denser so that the finished figure keeps its shape. You can even use thin colored cardboard.
The size of the finished craft depends on the sheet of paper that will be used. We need to cut a rectangle out of black paper of the correct size. You can use single-sided paper. Then we will fold the ears, and the white side will not be visible.
So, from the rectangle we need to make a cylinder. To do this, we twist it and glue it.
Photo 1


Can be used . It will just need to be pasted over with black paper.
Now let's make the ears. We place the cylinder in front of us and bend the top side inward. Bend over the half of the cylinder.
Photo 2, 3



Then we bend the back wall of the cylinder in the same way. There should be no hole at the top of the part. The fold line will be an arc. Sharp corners are formed on the sides. They will serve as ears for the mouse.
Photo 4, 5


The ears are ready. Now we will make the wings. To do this, we need to fold a piece of paper in half. Now draw a wing with a simple pencil. Please note that you need to draw from the fold line. If the paper is white on one side, then fold it with the black side to each other. Draw naturally on the white side.
Photo 6


We cut out the workpiece and unfold it. We get 2 wings at once.
Photo 7


Lubricate between the wings with glue and glue the part on the back of our cylinder. We glue it with the black side so that the fold line between the wings coincides with the place where the cylinder is glued at the back. That is, exactly in the center. Otherwise, one wing will appear smaller than the other.
Photo 8


Now we cut out the eyes in the form of triangles and two fangs from white paper. We glue them on the face.
Photo 9


You can also use a white highlighter or corrector. They can simply draw eyes and fangs.
That's all! Halloween craft in the form of a bat is ready!

Origami bats - Halloween craft

In summer, as soon as it gets dark, nimble and small bats appear on the street. They can be confused with swallows, however, these birds do not fly at night. It is mice that hunt at night in cities and villages. At Halloween, bats take pride of place, here no one confuses them with other characters. This tutorial will show you how to make small paper bats using the origami technique. In addition, the construction of paper products is such that they can be used as convenient bookmarks for books. Usually bats are black or gray. There are 2 options shown here - white and black, choose any of them whichever you like best. We can consider them as messengers of good and evil, since we are talking about a colorful holiday - the day of evil spirits.

What you need to work:

  • white and black paper;
  • nail scissors;
  • grains of red;
  • black felt-tip pen or pen;
  • glue.

How to make a bat figurine step by step

1. Using a black figurine as an example, let's look at the craft. Cut a 20cm by 20cm square or so.

2. Start assembling by folding the paper in half. In this case, either single or double-sided paper of any weight will work. Buy a regular set.

3. Place the resulting triangle in front of you so that the right angle is at the bottom. Pull down the horizontal side - the hypotenuse of the triangle. Back about 1 cm from the edge. Fold the paper very well to evenly mark the horizontal fold. Run your finger over the designated area several times.

4. Bend the sides further so that you have a pentagon in front of you - a multi-layered black shape. Make bends obliquely, combining opposite sides in the center. Flatten the blank so that the paper will remember this position.

5. Bring the corners back again, but not completely, but by setting a small fold in the folds. Thus, the central pentagonal piece will become the torso-head of the bat, and the side pieces will become the sharp wings. If a desire arises, then in the future, you can draw membranes on the wings. Animals are bats.

6. Turn the figurine over. Now the appearance of the flying representative of the Halloween holiday is clearly traced.

7. Gently cut off the top of the craft with a half-arc using small scissors. In this way, it will be possible to mark the narrow ears on the head. It is the thin scissors that will allow you to do the job neatly so that the whole structure does not fall apart.

8. Glue red round eyes with black dots in the center. The mouse look is ready.

9. Model the white figure in the same way. Her eyes can also be made red to show that the bat that flew in on Halloween is a vampire.

The resulting mice will feel great on the pages of the book in quality. Since the paper was originally folded in half in the form of a square, you can pinch it to put it on a corner. There are animal predators or herbivores, there are many species, we received only a copy of an interesting representative of the fauna.

Other options for paper bats:







In order not to forget the page address and share with your friends, add to yourself on social networks:

You can please yourself and your loved ones for any holiday with an original paper craft, which will become an interesting interior decoration. So, for Halloween, you can make a bat with your own hands. The manufacturing technology is so simple that you can create one toy or several dozen. The unusual decoration of the room, where the animals will be hung, will be remembered for a long time by all the guests of the party.

What do you need for crafts

Thinking about how to make a bat out of paper, you need to pay attention to the fact that the option presented below will be very easy, and even if a person has never used the origami technique, then creating an unusual craft will work out without any difficulty.

So, for work you need to have on hand:

  • scissors;
  • black paper.

Step-by-step instructions, or How to make an origami paper bat

First, you need to cut a square from a sheet of black paper, in which each side will be equal to 9 cm.

The resulting sheet is folded along one of the diagonals, it is important not to forget to carefully iron the bend. At the next stage, you need to unfold the paper and perform a similar action with a different diagonal.

This square is folded so that the wrong side remains inside, again diagonally. As a result, you get a triangle, which needs to be placed with the upper part towards you.

How to do The diagram given in this material shows in detail the process of making an original craft. The upper part is bent downwards - to a height of 2/3 of the height of the triangle.

The next step is to make the wings. Here the oblique line is bent to the base of the lower part, which has a triangular shape, by about one centimeter. All folds must be carefully ironed.

Both wings need to be bent back, for this the folds are shifted to the central part by a few millimeters.

After this action, on top of the craft, you can see small triangles located on both sides. Along each side, which is located closer to the center, small cuts should be made up to the lines of each wing.

The center section between the cuts should be folded inside out.

How to make a bat out of three-dimensional paper? To do this, you need to select the line located in the center of the body, not forgetting to select the lines running parallel to the wings.

What other option can you do

Even small children can take part in the work on such a craft.

What do you need to work? You will need here:

  • colored paper;
  • glue;
  • scissors.

Step-by-step instruction

From a colored sheet, you need to cut three semicircles of the same size. One of these details will go into shaping the head and torso.

One of the semicircles must be folded in half and bend the semicircles diagonally. Then unfold the craft, and fold it in such a way that one part overlaps the other. The resulting protruding corners will serve as the ears of the future masterpiece.

The two remaining parts will go to the wings. To do this, wavy lines are cut out from each semicircle. Then it remains only to glue the wings to the craft and, at the last stage, glue the fangs with eyes. Both of these parts are made of simple white paper.

The original version of the craft

Thinking about how to make a bat out of paper, you can turn to this method. Here you need a cardboard toilet paper base.

The base needs to be painted with black paint, and acrylic is best to give it a shine. White paint will be needed to make the animal's face. Then you need to cut out the ears from black paper and glue to the inside of the cardboard.

Wrapping paper is perfect for making wings. With the help of scissors, two wings are cut, each of which must have a bend at one end, it must be glued to the base.

How to make bats for Halloween, so that kindergarten or class at school for the holiday, we will now tell you.

To make do-it-yourself bat decorations for, you will need paper, cardboard, black marker or paints, glue. As well as various auxiliary materials. You will see, Halloween bats can be made from almost everything that is at hand.

Bat on out of clothespins. We paint the clothespins black, glue the cardboard wings to them and hook them wherever we like.

We love . And this time we propose to make a huge Halloween bat with our own hands. Such mice will be an excellent decor for large rooms: classrooms or groups in kindergarten.

If the question is still relevant for you, you will like our idea. You can easily turn a tin can into a bat-shaped candy bucket for Halloween.

We paint the jar with black paint, cut out the wings from cardboard and glue them to the jar, fasten the wire handle and decorate the bucket-bat with the help of multi-colored tape.

Another constant source of inspiration - or paper towels. Bend one or two ends of the sleeve, glue the cut cardboard wings, and the bat is ready for Halloween.

Halloween bats can even be made from a small piece of black ribbon. Tie a thicker knot, draw eyes - and you're done!

In the form of a bat as easy as shelling pears. We cut out the wings from cardboard, in the pumpkin itself we make side symmetrical cuts along the length of the base of the wings, insert the wings into the cuts. Even a child can handle such a craft.

To make a Halloween bat, wings can be attached not only to a pumpkin, but also to bottles or cans of drinks. A permanent marker will do to paint the can black.

Some black corrugated paper can help turn regular candy into bats. Wrap the candies first, then cut out the wings from the ends of the paper.

Cutting out a Halloween bat out of paper couldn't be easier. But how uncommon to decorate a house with such mice is a more difficult task.

Halloween bat template.

But for those who are not afraid of difficulties, we have found a video master class on how to make an origami-style Halloween bat.

Now you have tons of ideas on how to make a DIY Halloween bat. Take advantage of them and the holiday will turn out to be what you need!