Hospitals 

How to knit a long sweater for beginners. How to knit a sweater for beginners - diagrams, step by step instructions. Lesson knitting sweaters

Master class on knitting a simple pattern of sweaters with knitting needles

We bring to your attention an interesting-looking and easy-to-knit sweater made of a very thick woolen thread.

Description is given for the following sizes: S, M, L, XL, XXL, XXXL.

To start the knitting process directly, you must have:

Knitting needles # 8;

Drop Eskimo yarn (wool - 100%, density 50m / 50g) - nine hundred, one thousand, one thousand one hundred, one thousand two hundred, one thousand three hundred fifty, one thousand four hundred and fifty grams, respectively;

Knitting needles number 7 (circular, for a neck cut) 60 centimeters long;

Circular knitting needles, 80 centimeters long.

This work is characterized by the following knitting density: 11 stitches x 15 rows with front stitch, which is 10x10 centimeters.

Main pattern fits in accordance with the scheme M.1.

Garter knitting is performed as follows: one row with the front, one row with the purl.

The addition of loops is carried out in this way: we add one loop with a yarn over, and in the next row we knit the cape behind the back wall, avoiding the formation of a hole.

The front and back are knitted in a circle.

With knitting needles number 8 we dial ninety seven, one hundred six, one hundred seventeen, one hundred twenty eight, one hundred forty three, one hundred fifty two loops and we knit six rows of garter stitch, equally adding seventeen, twenty, twenty one, twenty two, twenty five in the final row, twenty eight loops. The total is 114, 126, 138, 150, 168, 180 stitches.

We mark the 1st and fifty-seventh, sixty-third, sixty-ninth, seventy-fifth, eighty-fourth, ninety loops - these will be our loops on the sides. Then we knit in a circle using pattern M.1. At the level of 62 centimeters, we close five loops from the sides (we marked them in the middle of these five loops). Now we move on to separate knitting of the front and back.

We knit the back.

The number of loops is fifty-two, fifty-eight, sixty-four, seventy, seventy-nine, eighty-five. We continue knitting according to pattern M.1, while closing the loops in the initial part of the row for the armhole: two loops one, two, two, four, five, seven times and one loop one, two, two, one, two, once, total - forty-six, forty-six, fifty-two, fifty-two, fifty-five, fifty-five stitches. At seventy-nine, eighty, eighty-one, eighty-two, eighty-three, eighty-four centimeters, close the middle twenty, twenty, twenty-two, twenty-two, twenty-three, twenty-three loops on the neckline. In the next row, we close on the side of the cutout additionally two loops, in total - twelve, twelve, fourteen, fourteen, fifteen, fifteen loops on both shoulders. We tie the hangers to eighty-two, eighty-three, eighty-four, eighty-five, eighty-six, eighty-seven centimeters and close the loops.

We knit the front part.

The number of loops is fifty-two, fifty-eight, sixty-four, seventy, seventy-nine, eighty-five. Knitting continues in accordance with pattern M.1, while closing the loops for the armhole, similar to the back. It turns out forty-six, forty-six, fifty-two, fifty-two, fifty-five, fifty-five stitches. At 79 centimeters, remove the middle eighteen, eighteen, eighteen, eighteen, nineteen, nineteen stitches per pin and finish the halves separately. We close the loops from the side of the cutout in all rows like this: two loops once and one loop zero, zero, one, one, one, once, in total - twelve, twelve, fourteen, fourteen, fifteen, fifteen loops on both shoulders. We tie the hangers up to eighty two, eighty three, eighty four, eighty five, eighty six, eighty seven centimeters and close the loops.

We knit a sleeve.

This should be done in straight and reverse rows.

With circular knitting needles No. 8, we collect twenty-seven, twenty-eight, twenty-nine, thirty, thirty-one, thirty-two loops (including hem) and knit six rows using garter stitch - adding two, four, six, eight in the same way in the final row , seven, nine stitches. In total, it turns out - twenty-nine, thirty-two, thirty-five, thirty-eight, thirty-eight, forty-one loops. After that, we turn to knitting using pattern M.1 (only we knit the edge loops with a garter). At the level of seven centimeters, we add one loop from two edges (after the first and before the final edge loop). We repeat the additions every 4.5; 4.5; 4; 3; 3 centimeters and another eight, eight, eight, eight, eleven, eleven times. In total, it turns out forty-seven, fifty, fifty-three, fifty-six, sixty-two, sixty-five loops.

At the level of forty-eight, forty-seven, forty-five, forty-five, forty-three, forty-three centimeters, we close 3 loops from the edges. Then we close the loops in the initial part of all rows from two sides like this: two loops two, two, three, three, four, four times and one loop zero, zero, zero, one, one, zero times. Next, we close two loops in the initial part of all rows until the sleeve is fifty-five, fifty-six, fifty-four, fifty-five, fifty-five, fifty-six centimeters long. After that, we close three loops on all sides and then close all the loops. As a result, the length of the sleeve will be fifty-seven, fifty-eight, fifty-six, fifty-seven, fifty-seven, fifty-eight centimeters.

We collect the product.

We start by performing the shoulder seams. Sewing on the sleeves and making seams on the sleeves.

We pass to the neck.

Change the needles to number 7 and knit in a circle. Slip a set of 40 to 60 loops (including pin loops) along the neckline. We create one row with the purl, one row with the front and one row again with the purl.

In the final row, we equally add or subtract the loops so that there are fifty, fifty six, sixty five, sixty eight, seventy four, seventy six loops. We knit one row with the front ones and then we knit an elastic band: one front, one purl. After you have knitted 4 centimeters of elastic, add one loop after each front one with the help of a cape. In the next row, we knit a cape for the back wall - it turns out seventy-five, eighty-four, ninety-three, one hundred two, one hundred eleven, one hundred and fourteen stitches. After that, we go to the M.1 pattern along all the loops. We knit the neckline to a height of 24-26 centimeters and close all the loops.

Today, the market is inundated with Chinese sweaters made from cheap synthetic yarns. Such jerseys are inexpensive, but they are not worn for very long either - after all, any wash can deform a poor-quality knitted thing, making it unsuitable for further use. Even high-quality, mass-produced sweaters have a serious drawback - there are too many of them. Therefore, putting on such a product, you can forget about creating your own unique image.

Original sweater

In the cold season, warm knitted clothes help out, and a self-knitted sweater or pullover will look original, even if it is made according to the scheme published on a popular website for needlewomen.

The variety of yarns gives an unlimited field for creativity. Can choose:

  • its composition;
  • texture;
  • thickness;
  • Colour.

Any pattern looks new if you use threads or knitting needles of a different thickness than those recommended by the author in the magazine.

When choosing how to knit a sweater with knitting needles (for beginners, schemes with a description are supplemented with step-by-step photos), you need to determine your own size, then compare it with the one for which the pattern and scheme in the magazine (on the website) have been developed. Before starting the manufacture of an original thing, it is necessary to correctly calculate the number of loops, for which a square pattern should be knitted. It is advisable to spend time knitting a square with a 20-centimeter side, since a 10-centimeter, often recommended by magazines, can cause an error when calculating loops for a large product.

The sweater can be knitted:

  • starting from the neck;
  • from the bottom edge of each part of the pattern.

For beginners, the second option is clearer, and even if (at first) errors occur, it is more convenient to fix them, since you have to dissolve less, and an excellent warm jacket will turn out quite easily.

Men's sweater

More laconic patterns are chosen for the male model - geometry reigns here: rhombuses, squares, rectangles created using loops knitted in different ways, or threads of different colors (textures). However, while there is not much experience in knitting, you can choose a jumper or sweater with a simple pattern.

It is necessary to take into account the peculiarity of the male physique: the shoulders are wider than the hips. Starting to knit from the bottom edge, remember to increase the number of loops so that the product expands at the top.

It is somewhat more difficult to knit jute patterns. But they look impressive, and the rearrangement of the loops creates a multi-layer structure that retains body heat, which is especially valuable in the cold season.

A sweater is a must-have wardrobe item for both a strong man who loves outdoor recreation and prefers an active lifestyle with fishing trips, and a gentle young lady who appreciates warm and comfortable clothes. In addition, knitting allows you to independently make an author's thing, which does not even remotely resemble Chinese consumer goods.

A beautiful pullover should be in the wardrobe of any girl and woman. In addition to the fact that it is perfect for all things, you can not just buy it, but knit it with a diagram and description. New models and various patterns can now be created by yourself at home. The main thing is to find a suitable option for yourself. If you are a beginner in this business, then our article in the knitting heading will help you learn this difficult business! A knitted pullover for women can be created in one day!

Knitted pullover for women with patterns

Every girl wants to dress well. But sometimes it is impossible to do this, because the models in the store are not the same, there is no suitable size! In this case, we offer you start knitting yourself. For this we have prepared various master classes and video lessons!











Knit pullover for women new models

Pullovers for obese women, new models of which were presented in new clothing collections, gained great popularity this fall. Fashionable items of large sizes look beautiful from melange yarns. This is the kind of pullover we will make today!

Materials for work:


Patterns:

  • Crossed loops 1 * 1 right (SK.P.): removes P. for additional. knitting needle from behind, L.P. from the left knitting needle, 1 L.P. with add. knitting needles. (Add.SP.)
  • Crossed P. 1 * 1 left (SK.L.): removes P. to do. knitting needle in front of the canvas, L. from the left knitting needle, 1 L.P. with add. cn.

Getting started: we knit all patterns according to C / X. Let's start with the back of 98 P. 3 centimeters with an elastic band 2 L. P., 2 I. P. Tool # 5 - C / X pattern, from each side of U.B. in each 12 R., 1 P. * 4. The next 12 R. - without U.B., after P.R. on the sides + 1 P. * 2 in each 12 R.

In each 2 P., close 3 P. * 1, 2 P. * 1, 1 P. * 1 through 44 centimeters. This step is done to form the armholes for the sleeves. At a height of 17 centimeters from them, we close the middle 16 P., we do both sides separately. On the sides we close 10 P. * 1. And after 18 cm from the beginning of knitting, we close all the armholes.

front part starts in the same way with tool No. 4.5 and 98 P. we also knit 3 cm with an elastic band 2 * 2, knitting needles 5 mm in C / X. On each side, U.B. 1 P. * 4 in each 12 R. 12 R. without UB, in each 12 R. - P.R. 1 P. * 2. For armhole - we close in each 2 P. on the sides 3 P. * 1, 2 P. * 1, 1 P. * 1 by 44 centimeters. To make a beautiful even neckline, close 12 medium P after 10 centimeters. Sides - separately. On both sides of the neck in each 2 P. - we close 5 P. * 1, 4 P. * 1, 3 P. * 1. By 18 cm - we close the whole product.

Sleeves: 60 P. with elastic band 2 * 2 - 6 R., P.R. 12 P. after last R. gum. Larger needles - on C / X with P.R. on the sides in each 4 R. 1 P. * 2. Close by 10 cm on the sides in each 2 P. 3 P. * 1, 2 P. * 1, 1 P. * 10, 4 P. * 3, 5 P. * 1. Close.

Collar: we sew the shoulders on circular joint ventures. Raise 96 P. - with a rubber band 2 * 2 4 R. Close the P. with an elastic band. We collect as standard: Sew on sleeves, sides and seams on the sleeves.

Openwork pullover for women with knitting needles

Beautiful openwork pullover with braids - quite a summer and simple option. This stylish option can be combined with shorts in the summer and jeans in the fall and spring. Above, you can wear a light cardigan, denim jacket or a delicate jacket. This cotton knitting pullover is also suitable for pregnant women.

Materials required for work:


We start the knitting process from the back:


Knitting of women's sweaters with knitting needles: schemes

To knit a sweater for beginners - step by step follow all the points of our mk, which will show and teach you how to knit. New models and patterns are waiting for you!

How to knit a sweater with knitting needles for beginners schemes with a description

Our gentle version of the sweater , in which we will use two skeins of yarn and a joint venture. No. 4. A detailed master class with a diagram and description will help you learn how to create this thing.
We start as usual with backrests : 73 P., 7 cm elastic band 1 * 1. Fancy pattern on C / X. 42 cm in each 2 R. close 3 P. * 1.2 P. * 1. From the armholes, count 20 cm and close the canvas.

front part blouses with a three-quarter sleeve - 73 P. elastic band 7 cm 1 * 1. Next is the same fancy pattern. At 42 centimeters for armholes - in each 2 R. we close 3 P. * 1, 2P. * 1. From armholes 8 cm - close 7 P. in the center. We create the sides separately. U.B. from the neck in each 2 R. 7 P. * 2. Close everything by 20 cm.

Sleeve: 45 P. with an elastic band 1 * 1 4 cm.Further we continue with a pattern, P.R, from each side 1 P. * 4 in each 12 R. 24 cm from each side in every second R. 3 P. * 1, 2 P . * 2, in each 4 R. 1 P. * 5, in each 2 R. 4 P. * 2. We close.

How to knit a sweater?

How to knit a sweater for beginners? It is best to combine two techniques: knitting and crocheting... We knit the next jacket for women with orange yarn, 3 mm needles and the same hook.


Patterns used in the work:

  • Scheme 1: elastic band 1 * 1.
  • S / X 2: fantasy,
  • С / Х 3 - circular fantasy

We start again with backrests : 78 P., elastic band 1 * 1 5 cm, then along S / X 2. After 35 cm, mark the sides with markers, at 45 centimeters - elastic band 1 * 1. After 2 cm - close the central P. 34 pcs. shoulders of 22 P. we knit with an elastic band 1 * 1.
Before we do in the same way as the back ... We collect the same as the previous options. Now we will crochet on S / X 3 - we tie the armholes around the perimeter of 48 cm.

Knitted summer pullover for women

Golden yarn for a lovely summer pullover , a diagram and description of which is only in our article! This is a rather warm thing, although it is summer. In the evenings it will be very comfortable and convenient. Our size is 38/40.

For it we used:


Patterns used in the work:


Back : 93 P. - 4 cm with an elastic band, with thicker knitting needles - a fancy pattern. After 45 centimeters, we make a place for the armholes in each 2 R. 1 P. * 4, 2 P. * 7. After 5 cm - an elastic band. After another two centimeters, close all the loops. Front we perform in the same way as the back.
For sleeves: 40 P. with a smaller tool 4 centimeters with an elastic band, with a thicker tool: fancy pattern. After 28 centimeters, close in each 2 R. 2 P. * 9. Knit another 10 centimeters - close the job. We collect as usual: sew the shoulders, sleeves and side seams.

Knitting sweaters for men with knitting needles scheme

Many needlewomen are wondering: how to knit a men's sweater with knitting needles for beginners? We provide our master class on creating a snow-white winter sweater with a wide collar.

Materials: 800 g of white yarn. You can choose any other. And large knitting needles (6.7).

Patterns in progress:



Jumper knitting for women schemes and description for free

Beautiful pink jumper / pullover for young girls made of soft acrylic yarn ... It is knitted from a beautiful pattern using cones. In this way, you can make chic jackets, knitted openwork blouses, a tunic or a warm men's sweater.

The pattern is done as follows: 1 R .: L.S. (1 L.P., I.P., L.P.) in the next. P., 3 together I.P. Repeat these steps. 2 R .: I.S. - all I.P. 3 R .: L.S. - 3 together I.P. (L.P., I.P., L.P.) in the next. P. - repeat. 4 R .: I.S. - I.P. In order to get a beautiful and even pattern, repeat from 1 to 4 R. of this scheme.

Description of the knitting process: 96 P. with an elastic band 1 * 1 3 centimeters, with a smaller tool - L.G. 40 cm, for armholes - from the sides we close in each 2 P. at 3 P. * 1, 2 P. * 2, 1 P. * 1. We knit another 19 cm and close the canvas.

The front part is more difficult to knit ... Because contains a pattern of “cones”: 96 P. - elastic band 1 * 1 2-3 cm. Further: 36 P. L.G., 24 P. - cones, 36 P. - L.G. We close 40 cm for armholes in each 2 R. 3 P. * 1, 2 P. * 2, 1 P. * 1. We close the middle 16 P. by 10 centimeters.

And as usual we will do both extreme parts separately ... Doing U.B. on the sides in each 2 P. 3 P. * 1, 2 P. * 2, 1 P. * 3. Close it at 20 centimeters.

With the onset of cold weather, each person's wardrobe is replenished with sweaters, pullovers, cardigans, which you can either buy in stores or knit with your own hands. How to do it? What is needed for this? And where to start knitting sweaters for beginners? This is what this article will be about. We will tell you how to choose the right yarn for a particular model of clothing, consider expert advice on choosing a pattern for men's raglans, describe the knitting workflow step by step.

Knitted things have always been used, and are still popular today. They are worn not only in the winter or cold autumn-spring period, a lot of clothes are also produced for wearing on summer days. A sweater or other handmade products will be an excellent gift for your beloved man for an anniversary or a manifestation of care for your parents. But before starting the main work, you need to decide on the choice of yarn, on which the quality and wear of clothes depends. So, there are three main groups of knitting threads:

  • woolen;

  • vegetable;

  • synthetic fibers.

They, in turn, are divided into other varieties, which differ in their strength, wear resistance, and thickness. A detailed description of the main types of yarn is given in the table.

Types of yarn for knitting
Woolen threads They have a number of advantages: they retain heat well and keep them warm, lightweight, have a strong texture, and slowly pass moisture. Depending on the production (from the wool of which animal the material is sheared), angora threads, alpaca, mohair, etc. are distinguished. As a rule, this type of yarn is used to create winter clothes, knitting sweaters + for men with knitting patterns, which are submitted on many thematic sites. Due to such a shortage of wool, such as fast rolling, knitting experts recommend combining it with vegetable and artificial fibers such as acrylic or cotton. Mixing these materials will make excellent vests for men and women, jumpers, children's dresses, fashionable scarves and hats. It should be remembered that woolen things must be treated gently during washing, it is not recommended to rub them roughly, as well as squeeze and hang on the dryer, they require delicate care.
Plant fibers Vegetable, natural fibers are presented on the thread market as yarn from cotton, flax, bamboo, which are produced without the use of pesticides, chemicals, etc. They do not include a variety of dyes and bleaches, due to which the above materials are usually called eco-yarns. Due to their light, airy texture, cotton and linen fibers are suitable for making summer clothes: T-shirts, swimwear, boleros, sundresses, etc. For example, cotton dries for a long time, but products made from it are comfortable to wear and do not cause discomfort even on the hottest days.
Synthetic yarn This group includes acrylic threads, as well as viscose, which is characterized as an intermediate material between natural and synthetic. Viscose yarn is characterized by pleasant tactile qualities, it is made from cellulose, due to which things knitted from this fiber are heavy, but at the same time smooth and soft. Most often, viscose threads are used to create summer clothes of a free cut: various women's tunics, dresses, etc. Acrylic fiber, in its qualities, is very similar to wool, but products made from it do not warm, as woolen, therefore it is used as basics for demi-season models: men's raglans, vests, etc. Acrylic threads are practically unable to absorb moisture, that is, they have a high level of hygroscopicity, which is one of the disadvantages of this fiber. However, acrylic clothing is lightweight and comfortable to wear, and is considered warm enough for the spring-autumn period.

When choosing these or those threads, experts recommend buying them with a margin, since it often happens that the same materials, but different supplies differ in shade or even thickness, which will negatively affect the quality, for example, of a sweater knitting pattern with raglan needles, which can be taken from the internet.

How to choose the right knitting tools?

For high-quality and comfortable knitting of a sweater with knitting needles with patterns, the master needs to choose the right tool. Knitting needles, as a rule, are acquired taking into account two nuances: their size and the material from which they are made, although no less often experts prefer to crochet. There are bamboo, metal and plastic tools. The first type is recommended to be used by novice needlewomen, since due to their rough surface, the dialed loops do not move around the perimeter and remain in place. Bamboo implements are suitable for almost all categories of yarn, they are quite flexible, but they tend to break under heavy load.

Metal knitting needles are capable of working with heavy materials, they are durable and practically not bend, suitable for knitting from fibers such as cotton, wool, and also acrylic. In contrast, the plastic tool is too flexible and light, therefore it is large enough, has a sliding surface, and is designed to work with any yarn. When choosing a tool, special attention should be paid to its diameter, since large loops require a large inventory, and when working with thin knitting equipment, small loops come out, which create a denser fabric, tight and narrow.

A variant of a simple men's sweater with knitting needles

When planning to work on the creation of men's clothing with your own hands, first of all, it is worth choosing the right pattern for knitting a sweater with knitting needles, with which the Internet network riches. You should not choose models with a bright color palette or strongly pronounced patterns; it is better to opt for calmer colors, with a minimum content of patterns and knitting elements. For the stronger sex, as a rule, jackets with a raglan seam, a geometric pattern, things with a high collar “under the throat”, etc. are suitable. Consider one of the possible options for knitting a sweater with knitting needles, using the scheme for beginners. For beginners in this business, this is, of course, very laborious and painstaking work that must be done in stages.

The classic "under the throat" pullover is perhaps the most common model in a men's wardrobe, warming on frosty days, and which every woman who knows or learns how to create knitted things with her own hands can please her beloved. Having considered the possible options for knitting patterns + for a sweater scheme, it is necessary to calculate the amount of consumable material, which corresponds to the size and physique of the chosen one.

So, for work you will need:

  • knitting threads from natural wool - about 20 balls of 120 ml / 50 g (blue or dark green);
  • tool No. 3, 3.5;
  • circular tool No. 3;
  • sewing needle;
  • auxiliary tool.

Knitting fabric for No. 3.5 is characterized by a density (10 * 10) 22 loops for 30 rows, for No. 3 23 loops for 30 rows. In knitting patterns for a men's sweater with knitting needles, the removal and addition of elements is indicated according to the pattern “1 * 2 * 4”, which means “1 time two loops in every fourth row”. So, consider the step-by-step knitting of a sweater scheme whose description in detail looks like this.

Back and front

Stage 1. The work begins with knitting the back, since the estimated size we have is 46-48 (50-52), we collect 110-120 loops on tool number 3, the place-beginning should be marked with a marker, and dial a six-centimeter elastic band 2 * 2.

Stage 2. At No. 3.5, a fabric with a size of 44 cm is made, according to the principle: 12 (11) loops with an elastic band 2 * 2, and the next 88 (98) with a front satin stitch and again 12 (11) loops with an elastic band.

Stage 3. On both sides, it is necessary to subtract: 1 * 2 * 4 and 11 * 2 * 6 (6 * 2 * 4 and 8 * 2 * 6).

Stage 4. Having created a canvas with a length of 67 (68) cm from the starting edge, the central 16 (18) loops for the neck must be closed and each side must be finished separately.

Stage 5. Decrease 2 * 6 * 2, and after 69 (70) cm close the remaining loops. And you can go to knitting the front, according to the principle of the back, only with a deeper cut for the neckline.

Step 6. After 56 (57) cm tied, 12 (14) stitches in the center are closed and each side is fitted.

Stage 7. Close 1 * 3 * 2, 2 * 2 * 2, 2 * 1 * 2, 3 * 1 * 4, 2 * 1 * 6, after which, having made 69 (70) cm, fix the rest of the loops.

Sleeves

Stage 8. Proceed to knitting the sleeves using tool number 3, on which we collect 58 (62) loops and knit a six-centimeter elastic band.

Stage 9. We make increments: 7 * 1 * 8, 13 * 1 * 6.

Step 10. For model size 46-48, tying 47 cm for a seam, close 2 loops once. After that, we subtract 6 * 4 * 6 (5 * 4 * 6) and 3 * 4 * 4 (5 * 4 * 4). In the next three rows, it is necessary to make 2 decreases after 9 loops, after 8 loops, after 7 loops, respectively.

Stage 11. The last reduction of the loops is performed (the remainder of 14 elements).

Stage 12. Working on the shoulder seams.

Stage 13. We take the collar into a turn, for which you need circular knitting needles, on them we type 136 (140) loops with the front stitch, and then there is an elastic band, we close the process after 21 cm. After that, you can sew in the sleeves and fix the side seams.

Having created one knitting pattern knitting sweater, which can be found in special magazines and on sites on the Internet, each novice craftsman can proceed to the production of an Irish pullover or ruby, safely adding them with a braid pattern, etc.

Women's openwork sweater knitting

Explore the knitting pattern for a women's sweater in an openwork style. For work we need:

  • 500 g of wool yarn;
  • direct instruments No. 4.5.

Having found on the Internet themed pages knitting sweaters for free, you need to deal with patterns, knitting an elastic band, etc.

In this case, we will consider an openwork pattern that is knitted using crochet stitches and knitting them together. Also, this model provides a "braid" pattern, which should be created according to a special knitting pattern for a sweater for women with knitting needles. Step-by-step operation instructions are as follows.

Back and front of the sweater

Using tool no. 4.5, you need to cast on 72 loops, and knit 16 rows with an elastic band 1 * 1, then dial 104 rows using the openwork pattern method. Row 113 should cover all of the dialed stitches. The front of the product is created similarly to the back up to the 89th row. This row should be closed 20 dialed loops, and then in each dialed level, on both sides. Thus, the upper part is formed with a cutout for the neckline. Observing all points of the knitting pattern + with a description of the sweater at the end, the same number of loops should remain on each side (19). Typing level 113, you need to close all the elements on both tools.

Sleeves

Both sleeve elements are knitted in a similar pattern. On tool no. 4.5, 35 loops should be cast, then there are 21 rows of simple elastic. Starting at level 22, you need to add 15 loops. Similar to the indicated technique, we collect another 60 rows 6 * 39 * 6 (front surface * openwork element * front surface). On the front satin stitch, we expand the sleeves so that there are 69 yarns on the knitting needles, and at level 61, close all the loops. After all the elements of the ruby's sweater, the knitting pattern is ready, you can proceed to assembling it, for which you will need a sewing needle. A “braid” is used as a finishing pattern, which is recommended to be created according to a certain pattern, using purl loops that cooperate with the front loops.

Thus, we can say that the models proposed above are only the simplest options that can be implemented and at the same time make a warm surprise to your family and loved ones. However, experts recommend that beginner masters start with simpler schemes that do not include complex patterns and transitions.

Video: models of fashionable women's sweaters fall-winter 2018

In contact with

Knitted sweater for men is a great gift for any occasion. And if it is also made with your own hands, then it will be a pleasure to not appreciate such a sign of attention except to knit to your beloved man. So let's find out how to knit quickly and easily. Knitting patterns for such models are very diverse, but in our article you will learn about the simplest and most accessible even for beginners.

Preparatory stage

It includes the choice of yarn and pattern, taking measurements and preparation, if necessary, the purchase of additional accessories, knitting needles, etc.

Knitted men's sweater involves the use of woolen yarn or another suitable for the cold season. The choice of pattern is entirely up to you. If you are an experienced craftswoman, then you can choose a beautiful Scandinavian ornament or a complex embossed pattern, and for beginners, simple knitting patterns are suitable. For example, or an elastic band.

After you have decided on the yarn and pattern, you can start taking measurements. It is necessary to determine the length of the future sweater, the width at the hips, the size of the armholes, the length of the sleeves and the girth of the wrist. If you want to make a surprise or take measurements there is no way, you can use the jumper already in your wardrobe for a sample.

If you are planning a sweater with a fastener, then it is better to purchase buttons in advance (so as not to guess with the size of the loops) that match the color and style of the yarn. And to knit embossed braids, you will need additional knitting needles or special devices (pins). And one more thing: you can knit a high collar using five knitting needles, two (but then you have to sew) or on circular knitting needles. This also needs to be thought about in advance.

This completes the preparation, let's figure it out, knitting needles.

Beginning of work

Traditionally, they start from the back. Having decided on the required number of loops, we collect them on the knitting needles. In order not to be mistaken with the size, first knit a sample and, based on it, calculate the loops. So, we knit an elastic band (if it is provided in the selected model). The photo shows an example of a sweater knitted with a wide elastic band; in this case, the entire back is knitted from beginning to end with it.

In another version, knitting from 5 to 10 cm with an elastic band, add 20 loops in the last row. This is an approximate amount. Focus on the size you need. The addition is carried out at regular intervals. Next, we knit with the main pattern. Since this pattern is suitable for beginners and is very simple, we do not make a cutout for the armhole, but we knit in a straight line to the neckline. Then we close the loops in the middle and make decreases for a smooth cut. We finish each shoulder separately. Do not forget to check with measurements or a sample when working. Let's continue to analyze how it is easier and faster.

We continue knitting sweaters

Now, similarly to the back, we knit a shelf. If your model has a round neckline, then just make it the same as on the back, only a little deeper. If the neckline is V-shaped, then first we close one loop in the middle, and then we perform uniform reductions on each side. Most often these are 1-2 loops through a row. For the high collar, we make the neckline the same as for the round neck. We also finish knitting the shoulders separately. The back and shelf are ready. It's the turn of the sleeves. You've probably already figured out what the secret to the simplicity of this scheme is. We do not make reductions for the armhole, which means there is no need to knit the upper edge of the sleeve along a complex pattern. Its top will be just straight. And the model of a sweater will turn out with slightly deflated sleeves.

Knit sleeves

In accordance with the girth of the wrist, we collect loops and knit an elastic band of the same width as on the back and shelf. Next, we add through one loop and continue knitting. When knitting a sleeve, the additions are made several times until the desired sleeve width is reached. At the end of knitting, the width of the sleeve should match the width of the armhole. Pay special attention to this. Having knitted the sleeve of the desired length and width, close all the loops. We knit the second sleeve in the same way as the first. As you can see, this is a very simple way, and now you know how to knit a sweater quickly and easily.

Assembling the product

When all parts of the sweater are connected, you can proceed to assembling it. You can sew parts using a thread with a needle or crochet. If you are sewing with a needle, it is better to use the same yarn as for knitting for the thread. First we connect the shoulders, then we sew in the sleeves, then the side seams.

Neck finishing

Now you need to arrange the neckline. For a high collar along the neckline, we collect loops on circular knitting needles and knit with an elastic band to the required height. In the same way, you can knit a collar on five needles. If you only use two, then first knit the neckline above the back, then above the shelf. And then sew the collar along the side seams. If the collar is with a cuff, then when sewing its upper part, do not forget that the seam must be made from the front side. Thus, in finished form, it will not be noticeable.

For a V-shaped or round cut, you can also use circular knitting needles, only in this case a 1x1 elastic is more suitable, and its height should not exceed 2-3 cm.

Another way to handle the neckline is crocheting. In men's models, several rows of single crochets look very good.

I would like to believe that in this article you have found the answer to the question of how to knit a sweater. The schemes and various models given above will surely help you make the right choice and knit a practical and beautiful gift for your beloved.