Institutions 

Electrical safety sign (poster) “Do not turn on! People are working. Poster - do not include! people are working Do not turn on people are working Russian light

When repairing, adjusting or installing electrical installations, it is very important to use special posters and electrical safety signs. They are designed to prohibit the implementation of actions related to turning on or off devices, which in turn are used to supply / disconnect voltage. In simple words, various kinds of signs notify the staff that work is underway in a certain area, so it is strictly forbidden to touch buttons, knife switches and machines. In addition, posters and safety signs used in electrical installations can be used to inform that a person is approaching an energized object, or to indicate the workplace. In this article, we will consider what types of posters and signs are in electrics, where they are used and what requirements are placed on their installation sites.

Forbidding

So, the prohibition signs and posters in electrical installations include the following:

This entire list of posters is classified as prohibitive and is used in the electric power industry. Please note that products can be portable and stationary (installed 1 time). An important requirement is that safety signs and posters should be made from electrically insulating materials. Metal plates may only be used if they are permanent and located at a sufficient distance from elements that may be energized according to the requirements.

Warning

Warning signs and posters are used to inform a person about approaching a live area. These types of safety signs include:


prescriptive

This type of posters and safety signs is designed to indicate the location of the work area in electrical installations, as well as a safe approach to it. The kit includes:


Pointing

The only signpost is "Earthed", which indicates that the electrical installation is earthed and must not be energized. Place of installation - drive of switching devices. If a prohibition and an indication sign are used simultaneously, the latter must necessarily be hung in the foreground.

So we provided posters and safety signs used in electrical installations. We draw your attention to the fact that it is allowed to increase the size of the plates when they are installed on large-sized equipment. In this case, the magnification should be performed in a ratio of 2:1, 4:1 or even 6:1. You can get additional information about sizes in SO 153-34.03.603-2003. We hope that now you know what types of posters and signs in electrics are divided into, and what are the conditions for use for each classification.

Hello, dear guests and readers of the Electrician's Notes website.

In the last article, we met with you with the requirements for, and their classification.

And today we will take a closer look at prohibition posters.

Let me remind you that there are 13 posters and safety signs in total. There are only 4 prohibition posters. That's about them and will be discussed in this article.

So let's go.

"DO NOT INCLUDE people working"

The first poster we'll talk about is the "DO NOT START PEOPLE WORK" prohibition poster. This poster serves to prohibit the supply of voltage to the place where repairs are being carried out and is portable. It looks like this.

I will say right away that this is the most common poster that we use in our work.

This prohibition poster has certain requirements for size and design.

The frame at the prohibition poster “DO NOT START PEOPLE WORKING” should be red. Frame width is standardized from 0.5 to 1 (cm). The inscription "DO NOT INCLUDE people working" is made in red. The background of the poster must be white.

This poster has 2 sizes: 20x10 (cm) and 10x5 (cm).

The prohibitory poster "DO NOT TURN ON people work" is used in electrical installations up to and above 1 (kV).

Above 1 (kV), a prohibition poster is hung on control keys, prohibition keys and push-button stations of high-voltage switches, as well as on the handles of disconnectors, separators and load switches.

I'll give you an example. The photo shows that the prohibition posters “DO NOT SWITCH ON people work” are posted on the handle of the bus disconnector, which is in the off state, and also (if you notice) on the automatic power supply of the switching circuits (solenoids) of the oil switch.

Here is another example from my practice. Here, similarly, prohibiting posters “Do not turn on! People are working” are posted on the automatic circuits of the operational circuits and switching circuits (solenoids), on the handles of the bus and cable disconnectors, as well as on the control key of the oil circuit breaker drive.

Up to 1 (kV) a prohibitory poster is hung out on control keys and push-button posts of automatic switches, contactors, as well as on the handles of knife switches.

If there are no switching devices in the circuit, then the poster in this case is hung out on the sponges (blocks) of the removed fuses.

"DO NOT OPEN work people"

The prohibition poster "DO NOT OPEN people work" serves to prohibit the supply of compressed air or gas to the workplace where repairs are being carried out. This poster is portable. It looks like this.

This prohibition poster, like all others, has certain requirements for size and design.

The frame at the prohibition poster "DO NOT OPEN people work" should be red. Frame width - 1 (cm). The inscription "DO NOT OPEN people work" is made in red. The background of the poster must be white.

This poster has one standard size: 20x10 (cm).

The prohibitory poster "DO NOT OPEN people work" is hung on the valves and gates:

  • air ducts
  • pneumatic drives of switches and disconnectors
  • carbon dioxide pipelines
  • hydrogen pipelines

Here I will say that, due to the specifics of electrical equipment at our enterprise, we practically do not use this prohibition poster.

"WORK under voltage, do not turn on again"

And we will complete today's article with the fourth prohibitory poster "WORK under voltage, do not turn it on again."

Dear readers, to be honest, I have never seen or met this poster in real life, and therefore I cannot show you its photographs.

This poster prohibits re-closing the overhead line (VL) switch after it has been automatically turned off. Before turning on the circuit breaker, it is necessary to coordinate the actions with the manufacturer of the work. All this applies to work on overhead lines (VL) carried out under voltage.

The poster is hung out on the keys and control buttons of the switch that feeds the repaired overhead line (VL). This poster is portable. It looks like this:

For the prohibition poster "WORK under voltage, do not turn it on again", as well as for all others, there are certain requirements for size and design.

This poster should have a red border. Frame width - 0.5 (cm). The inscription "WORK under voltage do not turn on again" is made in red. The background of the poster is white.

This prohibition poster has one standard size: 10x5 (cm).

P.S. On this article on the topic of prohibiting posters on electrical safety, we will finish. In the following articles, we will look at . Follow the site for updates. Subscribe to new articles from the site.

Durable self-adhesive sticker. Weather resistance. Designed to prohibit the inclusion of voltage when people work. Size: 200x100 mm.

Description of the sticker (tablet) "Do not turn on. People are working":

A series of information signs "Warning" refers to a line of self-adhesive stickers that prohibit turning on voltage when people are working.

Specialized stickers are made on the basis of high quality vinyl film. The main purpose of the sign is to prohibit switching on voltage when people are working.

The safety sign is mounted by separating the protective film from the sticker itself. Then the surface is smoothed with a dry material to remove air between the sticker and the base.

The sticker "Do not turn on. People are working" must be placed in the most visible place. The advantages of using information security signs have been proven by our customers. Warning signs help visitors, staff and various services to quickly navigate the facility.

Production of self-adhesive signs " Do not turn on. people work"possibly in large batches and with various additions.

Scope and recommendations of the safety sign "Do not turn on. People work":

  • In electrical installations up to 1000 V and above, if turned on by mistake, voltage can be applied to the overhead or cable line on which people work
  • Any place that must meet the relevant safety standards and have signs prohibiting turning on voltage when people work

Color combinations available for bulk orders.

Buy and order delivery of signs "Do not turn on. People are working" in Moscow:

"Do not turn on. People are working", as well as other information signs (and their analogues) you can order and buy through the online store notifications of our website or order delivery in Moscow from the ABars company. ( Attention, delivery is free of charge for orders over 5 thousand rubles.).

Plastic plates and signs are made of opaque two-layer foamed PVC with a thickness of 2-3 mm. The material has a low weight and high rigidity, which allows it to be perfect sticker replacement. Unlike them, the plate does not repeat the irregularities of the wall and can be attached pointwise to it in several places with double-sided tape or glue and can be easily removed from it without damaging the surface. In addition, the plates can be easily attached with self-tapping screws.

If necessary, plates and signs can also be made of plastic of any thickness from 1 to 5 mm.

Lightfastness and moisture resistance

The lightfastness of the paint is at least 5 years Depending on the intensity of solar radiation, the moisture resistance of the paint and material, it is possible to use the signs in the open air without additional protective equipment. For more information about the material and method of printing, see the section PRINT TECHNOLOGY

Safety

The material is fireproof (refers to self-extinguishing materials). The material and paints are certified for indoor use.

FASTENING

Double sided tape

Due to its low weight, the material is firmly held on a flat surface with double-sided tape. There are different types of adhesive tape for different surfaces. If necessary, you can purchase the required amount of adhesive tape with the order or separately. We can send a description of the adhesive tape to your e-mail.

self-tapping screws

When fastening with self-tapping screws, the material does not crack, and there is no need to pre-drill holes to fix the plate.

Universal polymer waterproof adhesive for PVC

The adhesive is suitable for quickly sticking PVC and foam on any surface.

You can buy "TAIFUN" glue in the section "Related products". Click .

Occupational safety store Protectorshop in Moscow. We order a plate not to include people working 200x100mm, as well as any product for labor protection and safety.

What you need to do to make a purchase from us:

  • Select a product item from the catalog and add it to the cart, specifying its quantity.
  • Make an order by email if you already have a ready list of commodity items, or if you need to make a custom order.

Occupational safety store Protectorshop delivers ordered goods for labor protection to the city of Moscow. Shipping costs are not included in the price of the goods and are paid separately.
Our production warehouse is located in Moscow.

You can choose the transport company-carrier and the method of delivery yourself.

If desired, our specialists can issue documents for delivery to a transport company, including its cost in the general invoice for payment for labor protection goods, or send a separate invoice.

Transport company services are paid separately.

Occupational safety store Protectorshop is a great opportunity to place an order, including the Plate do not include people working 200x100mm, or other necessary goods for labor protection in Moscow.

If your order exceeds the amount of 26,000 rubles, then delivery in Moscow within the Moscow Ring Road is absolutely free.

You can get more detailed information about this in the section of the site Payment and delivery.

In the occupational health and safety market, the Occupational Safety Shop Protectorshop in Moscow has very extensive experience working with various manufacturing companies and individual customers.

For all this not a short time of work, our store has provided its own quality standards for all the products we have, therefore, all products on labor protection and safety, as well as the Plate do not include people working 200x100mm, meet the highest criteria and, of course, all prices are in very affordable range.

The Protector Shop in Moscow has the main goal - to provide a wide range of products for labor protection and safety and maintain an affordable cost of goods, always increasing the number of sales, pre-lower prices so that in our country all private enterprises and manufacturing companies are provided necessary and the highest level of safety for their specialists.

Occupational safety store Protectorshop in Moscow brings to your attention products on labor safety from the best manufacturers, proven by long-term cooperation with us and aware of our consistently high requirements for quality, durability and reliability of products presented in the catalogs of our online store.

Our extensive experience of working with the most advanced manufacturers of labor protection products gives us the opportunity to bring to your attention products from the best suppliers that guarantee the highest quality of workmanship in our online store for safety and labor protection in Moscow, for example Sign do not include people working 200x100mm.

We guarantee the best price-quality ratio with respect to all suppliers and their products presented in Moscow of your choice.

Occupational Safety and Health- a summary of rules, the main purpose of which is considered to be the provision of safe working conditions at enterprises of various types. In order for the workflow to be absolutely safe, and the basic human values ​​(life, health) to be protected, medical, preventive, legal, sanitary and hygienic and other measures are required.

The rules, procedures and processes necessary to create the required conditions are defined and prescribed by the legislation of the Russian Federation. Control over the implementation of established norms is also carried out at the legislative level.

The main responsibility to provide employees with decent and safe working conditions is assigned to the employer. In order to obtain a positive result, the employer conducts conversations, briefings, lectures and other events that allow to inform the staff in a timely manner. In addition to active events, employers also passively inform employees using stands, posters and leaflets containing the required information.

However, the job provider is not the only one who has the responsibility to ensure the safety of the labor process. This type of obligation also applies to employees. Each of them must comply with safety standards, located not only at the workplace, but also on the territory of the enterprise. Also, the employee must master the minimum knowledge of labor protection necessary to ensure the safety of life and health. In case of non-fulfillment of obligations, the employee may be punished by the management of the enterprise. The scope of punishment will be determined by the size and content of violations.

All the required commodity units for labor protection can offer you. You can get an idea of ​​the full range of products by browsing the categories of the catalog, which contain magazines, stands, tables and diagrams, the rules for slinging goods, the plate does not include people working 200x100mm and other goods.

Despite the increase in technical indicators and the general improvement of working conditions in enterprises of various types and sizes, it is still customary to pay due attention to labor protection. The most important human values ​​continue to be life and health, and the main measures in the field of labor protection are aimed at protecting them.

The main responsibility for providing employees with safe working conditions rests with employers. It is they who should carry out activities aimed at providing employees with a complete information minimum on TB, aimed at competent actions in non-standard and life-threatening situations. Failure to comply with obligations by the employer entails the accrual of fines or criminal liability.

How to provide workers with safe working conditions?

In order to notify subordinates, employers carry out activities that provide for active information: lectures, conversations, briefings, and so on. It is also mandatory to passively inform employees with the help of memos, stands and other tools, which can be purchased by contacting the Occupational Safety and Health Shop Protectorshop in Moscow and having familiarized yourself with the categories of goods.

The catalog of the site contains the following types of products:

safety signs intended for indoor and outdoor use;
health and safety posters;
logs for recording briefings and conversations;
stands for placement inside and outside the premises;
first aid kits;
other types of products required for the competent organization of the process of notifying employees.

You can order the necessary products in the store by calling us or leave an order by email.

The main document that makes it possible to ensure the settlement of various situations in the field of labor protection at enterprises of the Russian Federation of various sizes is. Its content spells out obligations in relation to subordinates, allowing them to provide the latter with safe working conditions, thereby preserving their life and health.

If the employer fails to fulfill its obligations, tragic cases may occur at the enterprise. In such a situation, liability may follow. The type and severity of punishment for the employer will be determined by the extent of the damage that the employee received in the course of performing his main job duties. Responsibility for the employer can be material, administrative, and so on. All possible types of punishments for employers are spelled out in.

Responsibility for compliance with safety standards in the workplace also rests with employees. In this case, the role of the base document will be played by , . Depending on the extent of the violation, the employee may receive a reprimand, demotion or dismissal.

In order to avoid fines and other types of punishment, it is necessary to regularly carry out active and passive informing of employees through lectures, briefings and other types of events. For this purpose, you can use stands, posters, magazines, tables, signs, signs and other types of products that the Protector Shop in Moscow has at its disposal.

You can learn more about the products by looking at the product categories in which safety signs are presented, the plate does not include people working 200x100mm, magazines, first aid kits, evacuation plans and other products.