Interesting Facts 

How to make a big cardboard box with your own hands. Do-it-yourself cardboard gift box: simple schemes

When it comes to a gift, packaging is one of the most important elements of it. Ordinary gift wrapping has almost gone out of fashion, I want to pleasantly surprise a loved one, starting with the wrapper.

But gift boxes are not cheap. This problem is solved simply, you just need to learn how to make cardboard boxes with your own hands.

DIY square box

A square box is the simplest and most common option for gift wrapping.

It is not difficult to do it, the main thing is to follow the instructions and choose the right material.

You will need:

  • Scissors;
  • Pencil;
  • Ruler;
  • Thick cardboard;
  • Template (alternative to ruler and pencil);
  • Glue or double sided tape.

To begin with, select a sufficiently strong material from which you will fold the box.

You can take a white solid color version and paint it yourself, or find a template on the Internet.

When the template is ready, the matter is small. Cut out the printed or drawn sketch, fold the cardboard along the dotted lines, and glue using the semicircular ends. The case remains behind the lid, which is also done according to the usual scheme, the main thing is to take into account the dimensions of the box.

Take a square piece of paper and mark it diagonally. Then bend any of the corners to the intersection of the diagonals.

Then fold the same edge again so that this side coincides with the diagonal. After the manipulations, unfold the sheet. You should get clearly defined lines.

Do the above steps with the other parties. Each half of the sheet will be divided into four parts.

Make cuts from the top small "triangle", crossing the top three lines to the last bottom one.

The sheet is cut from two opposite sides. Whole sides fold to the center once, the second, bending them up. The sides fold inwards.

Lubricate the small upper triangles with glue and bend the lid inward. The box is ready!

Rectangular box with hinged lid

A hinged lid box is easier to assemble because fewer materials are used and less time is wasted.

To make this gift box you will need:

  • Scissors;
  • Thick cardboard (color at your discretion, on a white plain you can print a beautiful drawing, as well as color it yourself, color will save you from unnecessary trouble);
  • Scissors or stationery knife;
  • Pencil and ruler (if you want to draw a template yourself);
  • Glue.

First, create a template. Draw it or download it from the Internet. Downloading from the network will allow you not only to get a template, but also to beautifully color the cardboard.

Carefully cut out the resulting template along the lines. Then it's up to the small: fold the box along the dotted lines and glue at the junction.

To make the material hold together, do everything slowly and firmly press the edges. The box needs some time to dry. After that, in case you used plain unpainted cardboard, decorate the box to your liking.

DIY round box

This type of box is a little more complicated than a square or rectangular box, but it looks much more beautiful, and it is also practical for further use.

Despite the complexity of assembly, making such a box at home is simple.

You will need:

  • Cardboard or thick paper;
  • Compass;
  • Double-sided adhesive tape, or glue;
  • Pencil;
  • Scissors or stationery knife;
  • Ruler.

The template can be downloaded from the Internet, but you can also make it yourself. First, draw 6 circles on paper with a compass.

Three of them should be slightly larger than the others - they will go on the lid. Two strips are also cut out, one already for the lid, the second for the base.

The length of the strips should be equal to the radii of the circles. When cutting strips, add 2-2.5 centimeters to the width.

In this space, it will be necessary to draw and cut out the "cloves" with which the work will be glued.

After you draw the template, carefully cut it out. Take one circle and a strip. Lubricate the “teeth” well with glue and carefully begin to fasten the side wall and the base.

Let the material dry, and then compact the workpiece - take the two remaining circles of the same size and carefully glue them on both sides of the base, thereby closing the seams.

Perform the same manipulations with the other part of the box. When finished, let your craft dry and start decorating.

Strict style

You can easily create a box without a lid that will close.

This is done according to a simple template that you can draw yourself, or you can take it from the network.

In any case, you will need:

  • Cardboard;
  • Glue;
  • Pencil and ruler;
  • Scissors or utility knife.

In general, the principle of all home-made boxes is approximately the same - you need to cut, bend, glue according to the template, and then decorate to your liking. This case is no exception.

Draw a template or download from the Internet. Carefully cut out the future box, fold along the dotted lines, glue on the sides. The box will close at the top.

There are many types of boxes that you can make from cardboard with your own hands. Templates are easy to find on the Internet, the principle of assembly is approximately the same for everyone. Therefore, it will not be difficult for you to choose an option for the occasion.

Hiding a surprise or a long-awaited gift from the eyes. Finally, the ribbons are untied and crumpled - here it is! And it’s even a little pity, because the print on paper was beautiful, and the bow is so unusual ... All this beauty also cost a lot. In order to keep the festive mood longer, you need to properly think over not only the surprise, but also the packaging box for the gift.

There is no less intrigue in the temptingly rattling box than in bundles rustling with paper. And after the holiday, it will remain a pleasant reminder and may serve to store the gift itself or other things. In carefully thought-out packaging, love and attention will manifest itself in the same way as in the gift itself. In addition, a variety of ideas for original figure boxes can turn into an exciting quest.

How to make a gift box?

They say good packaging is half the gift. As for the finished boxes that decorate the windows, this is a sad truth. The issue of price is especially acute before the New Year, March 8 and other national holidays. I want to please all my friends and relatives at once, and, of course, I also want to pack them beautifully so that the souvenir does not look on duty.

In such a situation, skillful hands and imagination will help. You can decorate the finished box of a suitable size. This can be found in every home, even if not the most beautiful. In order to carefully paste over it, you will need very thin, durable paper and an accurate pattern. After all, the box will not close if it is untidy, with folds to bend the edge.

How to make a gift box with your own hands? The cardboard frame can be made to your size using minimal drafting skills. And, of course, decorate as you like.

We offer basic unfolding of rectangular and square boxes. You can print them in the desired scale and transfer the pattern to a dense base. The workpiece is folded along the dotted lines. Joints are glued on vertical and horizontal ribs.

And how to make a gift box more original? Here you can not be limited to a rectangular template. In addition to traditional geometric shapes, packages come in the form of a chest, a book, a house, a heart, a Christmas tree, candies, cars, various animals, and so on. For small souvenirs or edible gifts, you can roll boxes of thick decorative paper, armed with origami techniques.

Here are some interesting ideas with which you can easily make a real masterpiece.

Bonbonniere

Perhaps this is the most common type of gift boxes. Translated from French, its name means candy box. In tall, voluminous ones, they give loose sweets, like glazed nuts. In flat ones - fragile sweets with filling.

Traditionally, such bonbonnieres are given to guests at a wedding. Although, as a token of gratitude, this present is always appropriate. You can put any pleasant surprise in such a nice box. The following scheme will tell you how to make a gift box in the form of a bonbonniere.

If you bend the workpiece along the fold lines and insert the rounded parts of the heart with slots into each other, no glue is needed. To make the ribbon look neater, it is not glued along the entire length, but in two or three places.

Another themed bonbonniere, decorated with a snowflake, consists of two parts - the bottom and the main part.

Parts of the snowflake can be immediately painted with silver paint on both sides. The workpiece is rolled along vertical ribs. One side is glued. For such a small area, it is better to use not a liquid, but a glue stick. The hexagonal bottom is glued on all sides. The top is going into an openwork snowflake.

Origami technique

Gift boxes folded from paper will require accuracy and even skill. But you don’t need to mess with glue and the decor will need the simplest. The main thing is to choose the right paper. The box will turn into a bundle if you choose too thin material. However, the paper should bend easily, without creases. Therefore, very thick cardboard will also create difficulties in work.

This is a traditional box of the famous master Fumiaki Shingu. To work, you need a flat square sheet. It bends and unbends, as indicated by the arrows in the figure.

To pack a gift in it, you need to make 2 of them: a larger one for the lid, a smaller one for the base.

And for an origami box made of paper strips, you will need ten figured parts. Color alternation is at the discretion of the author. The first two are connected at both ends without glue. The rest are added one at a time. During the assembly process, a small souvenir or candy is hidden inside. Opened packaging will crumble with a handful of colorful ribbons.

For winter holidays

Boxes for New Year's gifts are usually needed in large quantities - you want to please everyone with at least a small trifle. Small souvenirs or sweets in original packaging will make the festive atmosphere warmer and brighter.

A wonderful Christmas tree, for example, can be cut according to a template from several sheets of paper at once. It is important that they do not move during operation. Do not cut more than three or four at once. Each blank is bent in four places. Glue is applied to curly needles.

Packaging for children's gifts

The easiest way is to surprise and please children with beautiful boxes. Whatever the gift, the process of taking it out of the box is a real event. Let the box be colorful and unusual, tied with ribbons that the baby will play with so impatiently, and inside he will be met by several layers of rustling paper that hides the surprise.

Semicircular folds are drawn here from the inside with the sharp end of the scissors. The cardboard is slightly incised and the fold will turn out neat. In accordance with the idea, eyes, ears, tails and paws are glued.

For loved ones

Gift boxes for Valentine's Day and just for special dates are usually made in the shape of a heart or decorated with a variety of decorative hearts. The color is traditionally pink or red.

Surprise birthday boy

A birthday gift box should be special. If you need to congratulate a loved one, it is worth spending time and effort to create a memorable decor. This is the case when exclusive handmade work is especially appreciated. It is better to choose a strong box and turn it into a jewelry box or treasure chest. Decoupage and scrapbooking techniques will come in handy.

If the birthday boy is a colleague at work, and all you need is a small sign of attention, the packaging should be stylish, discreet, but with a twist. For a small gift, a box with a festive theme is suitable.

L 1 and L 2 are the lengths of the sides, d of the lid and d of the bottom are the diameters of the round parts.

Box with a surprise

Small trifles, packed in beautiful boxes, made and decorated with your own hands, are sometimes valued much more than ordinary bouquets and sweets. To show attention and respect, it is better to spend more time than money.

This is one of the most wonderful gift ideas. The box opens by itself, you just need to lift the lid. Some small surprise is fixed at the bottom: a cake, a folded banknote, an ornament or a decorative composition.

Several parts for the box are cut out (the inner ones are slightly smaller). The ribs are not connected by anything, only the cover is glued. Since the product will turn out to be quite fragile, the lid should be easily removed. This should be taken into account when decorating the box.

A bow or picture is glued to the top. On multilayer walls, you can attach three-dimensional decor elements, photographs, cards with wishes. Even tea bags will come in handy if there is a sweet present inside. In the center, you can place small decorations on springs or strips of hard plastic. Flowers, butterflies or shaped confetti will fly up and out when the lid is lifted.

Such a box is called a magic box, it is a bright representative of scrapbooking products. The magic box can be themed for any holiday. The main thing in this work is attention to detail and the preservation of the overall style. And, of course, a sense of proportion.

Where to hide a huge secret

A very large gift box can be a problem. If the present is presented in factory packaging, it is easier to paste over it with wrapping paper and pin a bow of paper ribbons. But if you want to use your imagination, you can, for example, paint such a box with spray paints and attach a plush toy to the top.

The gift can be large and heavy. If it is installed in advance in a room for a holiday, you can make a box without a bottom. At the moment of presenting the gift, the box solemnly rises and ... tadam!

Oddly enough, large boxes are also made for small gifts. This is for those who love intrigue. One box opens, and then another, and another, and another ... Or maybe multi-colored balloons filled with helium fly out from under the lid? Or live tropical butterflies? There is no limit to modern possibilities.

How to decorate a gift box?

For example, a finished shoe box will have to be pasted over from the outside and inside to give the work a finished look. For the wrong side, you can use not only paper, but also thin matter - silk or nylon.

How to decorate a gift box with a ribbon? A decorative cord or ribbon for a bow will need about three to four times the perimeter of the box. Its splendor depends on the length of the free end, so it is better not to save on length.

The gift does not need to be wrapped. Decorative elements can simply be glued to the sides and lid. All kinds of sequins, stickers, lace flowers and butterflies, beautiful stamps, appliqués - all this will greatly speed up the work on packaging.

A durable box can be decorated using decoupage or scrapbooking techniques to make it look like a jewelry box. There is a chance that she will serve for a long time in this capacity and bring no less joy than the gift itself. Of course, this time-consuming work is only for special cases.

Packaging made of thin cardboard or paper should not be overloaded with decorative elements. Sometimes two or three rhinestones or a painted shiny border are enough.

Boxes can be decorated from the inside. To do this, they are not only pasted over with colored paper or upholstered with cloth. The packaging is filled with raffia or sisal fiber. They will be replaced by thin rustling paper, stacked in sheets or cut into strips. There are special fillers - long strips of cellulose, dyed in different colors. With the help of such materials, you can create a decorative composition by placing a gift in the center. For example, from green fibers and a few artificial flowers you will get a mini-clearing in a box. On the inside of the lid, you can make a congratulatory inscription.

Stylish packaging materials

In creative shops, you can buy accessories for decoration - beads, sequins, rhinestones, fancy stickers, appliqués, braid, ribbons, flowers - everything to realize the most complex ideas.

Sold in specialized departments

  • decorative adhesive tape, eyelets, brads, all kinds of figurines, chipboards, rubs, pendants;
  • paper and drawings for decoupage;
  • pictures, figures and tags for cutting;
  • cardstock - thin and durable cardboard for gift boxes of all colors and with any print;
  • scrapbooking background sets.

In addition to pencils and scissors, curly staplers, stamps with colored ink, a thermal gun with glue, double-sided and plain tape can be useful to you.

Sometimes expensive materials can be successfully replaced with the remains of beautiful wallpaper, labor-intensive decoupage - hand-painted with acrylic paints, etc. It all depends on the desire and capabilities of the donor. The main thing, being carried away by the creation of artistic packaging, do not forget to put a gift inside.

We do not always have at hand a box of a completely specific size for specific needs. For example, it would be nice to carefully put small treasures into it, divide gloves, socks, hairpins, handkerchiefs into compartments, or arrange a gift. Therefore, knowledge is worth a lot!

Take a square sheet of paper. Carefully fold it exactly diagonally in half. First on one side, then on the other. Expand the sheet.

Fold the sheet in half horizontally. Expand it again. To achieve the best results in solving the simple task of how to make a paper box, you need to fold the blank carefully, each time carefully aligning the edges from corner to corner.

Repeat the folding action, but vertically.

At this step of the lesson, from paper, you should get a sheet with crossed lines from the folds exactly in the center.

Fold all 4 corners in turn exactly to the center of the square, where the lines from the folds converge.

The top half of the resulting workpiece must be folded in half.

Repeat the same action, but with the bottom half.

Bend the halves and release two opposite corners, as shown in the illustration:

Rotate the fold sheet 90 degrees.

Fold the half of the workpiece from the top edge to the center.

Fold the bottom edge towards the center as in the previous step.

Until now, doing origami and describing the process, from paper, looked rather far from the final result. But at this stage of the lesson, finally, the man-made box acquires "sides". To do this, slightly open the newly folded parts of the paper by 90 degrees.

Lift the open end while pressing the corners as shown in the illustration until you have another "side" of the box.

Lower the top corner so that it hits the exact center of the base of the paper product.

Repeat steps 13 and 14 on the other side.

This step is optional, but you can glue the raised corners on the bottom of the box if you like. Ready!

To make a lid for the box, you need to take a paper square 4 millimeters larger than the previous one and fold it in the same way. Then connect both parts, and you will have a full-fledged box with a lid on your hands. Now you know how to make a gift box. Of course, it will be stronger from cardboard. The presentable box should be colored. Bright or in restrained colors - it depends on the event.

Perhaps making a box will encourage you to learn how to make a paper vase or other equally interesting things. Do not forget to involve children in the manufacture of such gizmos. General classes are not only useful and interesting learning, but also unforgettable moments of communication.

After analyzing several MKs for packaging, I found an option that suits me so far. So you can make a box of any size and color for a jewelry box, plate, etc. There is nothing new in the box layout itself. The main thing that I "invented" for myself is the manufacture of my "designer" paper. It's hard to find beautiful paper in a small town, and here's what I propose to do.
1. Materials:
- whatman paper or cardboard,
- napkin or corrugated paper
- sheet of tracing paper
- PVA glue
- scissors
- ruler
- pencil

2. Determine the size of the box, then to draw a diagram.
The size of the bottom of the lower part: add 1 cm to the size of the product itself.
The size of the side parts is equal to the height of the product or slightly higher.
The size of the folds for the lower part: 1 cm less than the size of the side part.
Cap size: 0.5 or 1 cm more than the bottom.
I make the size of the side parts of the lid 3 cm.
The size of the folds for the lid is 2.5 cm. (For a simple box, you can do without them)

For example: the size of the box is 5X5X4. Box dimensions: bottom 6x6 cm; sidewalls 5cm; fold 4 cm. Lid 7x7 cm, sides 3 cm, fold 2.5 cm.

Now we determine the dimensions of the square, which will be the basis of our scheme. We add 4+5+6+5+4=24cm. This is the length of the square, which we will draw on whatman paper.
In fact, making all the calculations is not as difficult as it seems))) If you do it once and understand the principle, you will easily make them in your head without any papers and notes.
3. We draw a square on a Whatman paper, in our case with a long side = 24 cm. Cut it out.

4. Now we mark the square on each side according to the scheme: 4cm - 5cm - 6cm - 5cm - 4cm. We connect all the points, we get such a scheme.


Here are shaded those parts that are then cut off.
5. Now, in fact, we start making paper. To do this, you can use a regular napkin of a suitable pattern and size. Or corrugated paper, then the box will be plain. The square that we cut out of whatman paper. lubricate with PVA. Here it is important to coat the entire surface well, especially the edges, but there should not be too much glue so that the napkin does not get wet.
While the glue dries slightly, iron the napkin with a hot iron so that there are no wrinkles. Corrugated paper can not be ironed. Then we put a napkin on whatman paper, cover it with a sheet of tracing paper and carefully iron it with an iron. I did it neatly not the first time, some skill is needed here))) That's what happens.

6. Now we cut off the extra parts of our square. We get such a figure.


7. We make cuts along the red lines.

8. Carefully bend everything with a ruler

9. We wrap the valves and bends inside and get a pretty box. More precisely, its lower part.

10. For the cover of the box, we repeat all the operations, only the dimensions of the square will be different. In our example, 2.5cm + 3cm + 7cm + 3cm. + 2.5cm = 13 cm
As a result of all the described manipulations, such a box appears


Everything is done quickly enough, in about an hour I did 6 such things

And this is what the finished product looks like in a beautiful package.

Today I will tell you how to make a square cardboard box with your own hands according to the correct scheme. It can be decorated with any decor, or cardboard with a ready-made pattern is appropriate.

We will need:

Cardboard 38x25.5 cm;
ruler;
scissors with a sharp end;
pencil;
organza ribbon;
white, pink corrugated paper;
half beads;
sisal;
glue gun;
awl or toothpick;
ruler.

First you need to draw a box layout on the back of the cardboard. It consists of six squares of the same size. The sides, with which the walls of the box will be fastened, are also drawn with the same height. From each edge you need to make small incisions. When gluing, they will not deform the cardboard. Only the ledge from the very first square on the left will be 1.5 cm wide and its corners are left even for now.

In order for all the walls to be perfectly even, we draw along the lines under the ruler with scissors very carefully. So we formed the fold points.

Now we will process the corners of the protrusion of the very first square. We make them rounded and make small cuts on each side. With this part, the lid of the box will close.

We bend all sides of the box, forming a right angle. You should get something like this.

Let's get started with the box. This is done very simply. We put the cardboard blank with a lid closer to us and start folding the cardboard onto ourselves from the other side. We glue the internal allowances to the walls, forming a right angle.

We get such a cardboard box in the shape of a cube.

It remains only to decorate. We tie the side walls with an organza ribbon, the ends of which we tie into a bow.

Cut out 5 rectangles of 6x5 cm each from white paper.

From each we form petals, making one edge sharp and the other rounded.

Gently stretch the rounded edge until waves form, then use an awl or toothpick to twist the edges of the petals back.

Glue the petals on the cardboard in a circle, forming a flower.

From sisal we form a small circle and glue it in the center. There we paste a ball of pink paper, which can be formed with the help of fingers. In addition, we decorate the box with beads.

Thus, we made a simple one in which you can put a gift for a loved one.