How to tie a ribbon bow on your head. How to make a large, lush and beautiful ribbon bow on your head, for a gift, for discharge from the hospital? How to make a bow from a wide, narrow and thin ribbon with your own hands? Other hairstyles

27.04.2019

Making beautiful things with your own hands is not that difficult. You just need to find good instruction or a master class with a video or photo of samples, where each step of the process is described in detail and repeat the steps at least once. So you can learn how to create a lot, for example, beautiful bows for wrapping gifts and more.

How to make a ribbon bow with your own hands

Such an ordinary composition, like a bow, is constantly encountered in Everyday life: they can quickly decorate anyone, even the most small item, pack a gift, give your interior, clothes and even your image festive look... A bow from a ribbon with your own hands is not so difficult to make yourself, and there are so many variations of its creation from fabric that everyone will find the most convenient way for him. They can be made from satin, from organza, from tulle or even silk - any material will look beautiful and festive both in life and in the photo.

There are as many variants of this composition as there are techniques for their production. Classic, tiered, double, strict, butterfly, American, kanzashi, rep, flower - in order to create beauty, not so many tools are needed: a ribbon, scissors, in some cases glue and decorative beads for decoration. Create brooches, elastic bands, hairpins for September 1 or graduation - the workshops below will help you bring your ideas to life in a matter of minutes.

How to make a gift bow from a ribbon

If you want to decorate a gift with your own hands, then on help will come simple step by step instructions below. For this traditional arrangement, you need scissors and a long ribbon. Choose a color that will overlap with the packaging or the gift itself. Do not overdo it with colors, because a calm palette is in fashion now, not burdened by an overabundance of colors. A satin ribbon is best suited: you can find it in any sewing department, while it is very inexpensive.

How to make a ribbon bow for a gift:

You need to measure and cut the ribbons different lengths.
First you need to make "rings" using pieces of different lengths.
The smallest is placed on top of the largest and so on until the end.
You need to fasten them in the middle with a paper clip.
We put the almost finished bow on the base.
In a small piece you need to hide the paper clip by gluing the ends from the wrong side.

How to make a fluffy ribbon bow

You can make lush bows from satin ribbons with your own hands for almost any occasion. Would you like to decorate a gift? Such a bow made of silk or satin ribbon... Does your daughter want to go to kindergarten or school with an original hairstyle? There is nothing easier than creating it with this decorative element. Step by step instructions below:

We form the first ring large and forefinger.
We repeat the action until there are as many rings as needed.
Tie everything in the center, and then tie it on a strong knot.
We straighten the resulting rings.

How to tie a double satin ribbon bow

Although the design itself is very simple, the do-it-yourself double satin ribbon bows look very elegant. It can be safely attached to a headband or hairpin as a decoration to decorate your hair. Such a bow can be safely used for gift wrapping or decoration of clothes. In general, you can call it universal, suitable for any need. Instructions:

We make a ring using a wide ribbon and fasten the ends with glue.
We put a piece of narrow ribbon on top, and we also fasten the ends.
We smooth the workpiece with an iron, fix it in the center with a stapler.
We hide the paper clip in any way possible for you.

How to make a paper ribbon bow

Using paper tape and step by step instructions you can make a bow for decoration of premises or gifts for any occasion. To do this, you need a foundation. the desired color, scissors, a stapler or glue gun and a little skill. Instructions:

For the base, you need to make loops, fan them and fasten them with a stapler.
Then we use short segments and leftovers. Can be crossed, turned out, twisted.
Having retreated a centimeter from the fold, you need to fasten everything with a paper clip.
We unfold the tails, fasten again.
We fasten everything neatly together, and our beautiful bow made of ribbons with your own hands ready!

How to tie a fluffy nylon ribbon bow

Everyone knows these beautiful bows since time primary school, when the girls came smartly on September 1, with hairstyles on their heads, where such a bow adorned, and sometimes not even one. Making bows from nylon ribbons with your own hands is not at all difficult, you just need to try several times to do everything according to the instructions, and then you can make them yourself from memory. Instructions:

It is easy to make a beautiful bow from satin or nylon ribbon. This accessory can be used to decorate a gift, a piece of clothing or an interior.

In the arsenal of every woman has her own secrets and tricks to make our life easier and more beautiful.
Bows made of ribbon and other materials can add festive mood and complement the outfit, hairstyle, gift set, table setting and other furnishings and clothing
Many women think that making a beautiful bow on their own is difficult.
But this is not so, all people can create a beautiful masterpiece.
One has only to prepare the materials and you can proceed to this interesting view handicrafts

Previously, bows and long ribbons were woven into braids for girls. Currently, first-graders are attached ready-made fluffy bows made of satin or nylon ribbons.

How to make a simple beautiful ribbon bow with your own hands? The simplest and beautiful bow obtained from a two-tone satin ribbon.

To make such a decoration, you need to follow these steps:

Prepare 20 cm wide ribbon (5 cm) light shade, and 40 cm of tape of a dark shade 2 or 3 cm wide
Fold the wide tape and glue the ends as shown
Attach 20 cm of thin tape on top and glue the ends as well. Glue them to the folded ends of the wide tape
Wrap the remaining 20 cm of thin tape in the middle of the resulting "sandwich" and make a loose knot
Tuck the ends of the ribbon inside the knot or leave them loose so you can tie the bow to clothes, hair, or gift wrapping

Here are some more ways to make simple bows:

Another way to make a simple bow can be seen in this video.

Video: How to make a RIBBON BOW of any size?

You can make a beautiful bow from thin braid by folding its segments in the form of a "figure eight", and then stitching them in the middle. The more details, the more beautiful the bow will be.

Important: Making a simple bow is not difficult. Show your imagination and in a few minutes the accessory for the holiday will be ready.

Making such a bow is simple:

Buy a tape of the correct width. The length depends on how lush the bow should be - 1 or 2 meters
Fold the ribbon like an accordion
Tie in the middle nylon thread... Leave the ends free so that you can tie the product to a gift or to your hair
You can make a "sandwich" from separate glued elements, tying in the middle

Another way to make a fluffy bow. Prepare 2 meters of white ribbon and small beads.

Such a "royal" bow is made up of separate small details-bows, which are sewn to the base of white felt. To make small elements, follow these steps:

Cut the ribbon into equal lengths of 10-20 cm, depending on what size the bow is needed
Fold in half, wrong side out
From the bent line, at a distance of 2 cm, drip glue and press this place with tweezers so that the tape sticks together
When the glue dries, turn out the bows, and make a fold at the ends.
Tie the ends together and sew to the base
You can decorate such a bow with rhinestones, gluing them to the middle or with beads different colors... Everything - the product is ready

How to make such a "royal" bow can be seen in the video.

Video: Lush bow for kindergarten graduation

It is worth noting: This decoration can be worn by a daughter at a graduation kindergarten or on September 1st. It will perfectly complement and fluffy dress or school uniform.

Often a bow tie should be matched to a suit of an adult or a child. Of course, you can buy it in the store, but not always there is a suitable color in the assortment. Therefore, you need to make such a tie yourself.

How to make a bow tie from a wide ribbon?

Follow these steps:

Prepare 20cm of 5cm wide tape and 18cm of 3cm wide tape
Fold the segments in half and glue the ends together. Hold them together with a needle so that the glue holds the edges well.
When the glue is dry, place one piece on top of the other and thread stitches down the middle.
Pull the thread and secure
In principle, this is enough, but you can bandage the seam with a thin tape to match. "Butterfly" is ready

Beautiful "roses" are obtained from a wide ribbon. How to make such an original bow from a wide ribbon? It's simple.

Follow these steps:

Wind the tape around your arm as shown in the picture.
Make a knot and remove the product from your hand
Spread the rose petals inward
Do it all to the last petal
How more luxuriant rose, the longer the tape should be

A thin ribbon bow looks stylish and attractive on any interior item or clothing. It adds sophistication and elegance. How to make a bow from a thin ribbon?

For decorating gifts, festive table and the Dior bow is often used as an accessory for clothes.

How to make a Dior bow from a thin ribbon?

To make such an accessory, follow these steps:

Prepare 1m tape 1-2 cm wide
It must be cut into pieces of different lengths. The number of these sections will depend on how fluffy you want the bow to be. Make the length of the turns in such a size that this bow lies along its entire length. packing box the longer the turns, the more beautiful
Lay the finished turns on top of each other, gradually reducing the size of each turn
The last turn should be no more than 1 cm in diameter
Fasten the resulting bow with a thin tape to match, threading it into the last round
This accessory can be attached to any surface: flat or round

Sometimes you need to make many small bows from a thin ribbon. This will help regular plug... Follow these steps:

Prepare a 0.6 cm wide satin ribbon and a table fork
Apply tape to the fork, leave the ends at least 4-5 cm
Wrap the left edge of the tape around the fork and slide it in front, pushing it between the middle teeth
It turned out to be a loop. Without tightening this loop, push the end of the tape, but already on top of the fork between the teeth
Insert the end of the tape into the loop from the bottom and tighten
Remove the bow from the fork and cut off excess tape around the edges
Burn the cut ends of the tape with a fire (lighter or match) to prevent the tape from falling off. You can make as many of these bows as you need - quickly and easily

More detailed instructions how to make a bow using a fork and thin tape can be seen in the following video.

Video: How to make a cute bow from a satin ribbon and a regular fork in 2 minutes?

Such an elegant accessory can decorate a gift, a piece of clothing, a table setting, or even hair. An elegant and lush bow is made from a thin ribbon. How to make a bow from a narrow ribbon?

Follow these steps:

Prepare a narrow ribbon of two colors and cut a 2 cm circle out of cardboard
It is necessary to cut the tape into pieces of 5-7 cm
Now with a glue gun, apply a drop of glue to the cardboard circle and glue the edge of one of the pieces of tape. After 0.5 cm, apply a drop of glue again and glue the other end of the tape
Reapply glue between the glued ends of the tape and glue the end of the tape in a different color. Glue its second edge next to the edge of the tape that was glued before.
Repeat this until several rows of such turns have been glued. The last 2-3 rows can be done smaller, and in the middle attach a bead or rhinestones

Important: When gluing the tape pieces, thread each end through the previous loop. Thanks to this technique, the bow will turn out to be lush and beautiful.

An illustrative example of how to make such a bow can be seen in the following video.

Video: Lush Bow from Narrow Satin Ribbon / Kanzashi master class

A bow with your own hands for decorating a hairstyle turns out to be original and beautiful. You can be sure that only you will have such a decoration.

How to make a bow on your hair? Follow these steps:

Prepare 2 pieces of tape, 5 cm wide and 25 cm long, and a thin tape for the middle
Take one piece of tape and fold a corner at one end
Fold the second edge with a corner near the first folded end. Then bend the resulting corners towards each other. Fasten the folded loop with a needle
Now next to the folded corners, make another turn and secure with a needle
As if turning the resulting product over, make a corner again to make a "rhombus". Do this until one small triangle of ribbon remains.
Fold the diamond in half, and again in half. Now you need to "corner" fold the remaining edge of the tape. It turned out a triangle
Hold it by the center so that everything that we put together does not open up. Take away all the needles
Fold the inner triangle to the center to make the original "petal"
Bind with a needle and thread where you are holding with your fingers
You need to make two such parts.
Sew these pieces together and tie in the middle with a thin ribbon
Sew this bow to an elastic band or glue to a barrette and a unique hair accessory is ready.

Detailed instructions are in the video, thanks to which it will be easier for you to make a beautiful hair bow.

Video: MK - how to make a HAIR BOW from a satin ribbon?

If your daughter is going to first grade, then she should have the most beautiful and lush bows. How to make a bow from a nylon tape?

It is easy to make a lush and beautiful bow. If the store does not have a tape that needs a width, you can use an organza cut instead.

To make a bow, follow these step-by-step steps:

Prepare two ribbons 7.5 cm wide and 140 cm long
Fold it in half lengthwise. Now thread the folded edge with a needle
When all the tape is sewn, pull the thread until the strip turns into a piece with a length of 40 cm
Fasten the thread and straighten the product along the entire length
Do the same with the second tape.
Cut a circle out of felt or thick tape with a diameter of 7.5 cm
Make two holes in a circle, and insert a thin ribbon or braid into them to match the bow
Apply glue to the edge of the backing and attach the first gathered tape
We continue to coat the base with glue and glue the tape in a spiral. When the first tape is over, continue to glue the second tape in this way.
When there is a little space left on the base, cut off the excess tape and fasten the thread
Stick all the tape, smearing the base in the middle. Do not forget to cauterize the edges of the tape so that it does not crumble

See how to do it in the video.

Video: Lush organza bow. Master Class

Making a paper bow in stages:

Prepare 12 pieces of tape 2 cm wide and 25 cm long, and one 5 cm tape for the middle
Begin to fold the large segments into a figure eight, as shown in the figure. The edges can be stapled or glued with hot melt glue. Fasten the small tape to make a ring.
When all the details are ready, start collecting the bow, beautifully placing the turns and gluing together
The smallest coil is glued in the middle
WITH back side, using a stapler, attach a thin string or the same tape that was used to create the bow

A master class for making such an accessory can be seen in the video.

Video: DIY gift bow from PAPER

Can be done paper bow and in a different way, as shown below.

In this method, the tape is not cut into pieces, but folded in "eights" into a single structure. In the middle, the flower is tied with a thin paper tape.

When a newborn is an important event and everything should be flawless. Therefore, a bow for a newborn's envelope can be made by hand. How to make a bow from a ribbon for a statement?

Tip: Choose a beautiful ribbon, for example, with gold edges, so that the flower turns out to be elegant.

Execution in stages:

Cut from pink or blue satin ribbon, gold-edged ribbon of the same color, regular satin thin ribbon, and patterned ribbon
To collect the flower, start with a piece of a wide satin ribbon. Fold the ribbon in half and sew with a needle and thread. Also do with all the satin sections, collecting them together in a circle. When finished, secure the thread.
Collect all tapes in the same way. You should get 4 flowers
Apply hot glue to the felt base and start gluing flowers, first large, then descending
In the middle, make petals from a thin braid with a pattern, pre-gluing the edges of the segments of this braid
The last step is gluing a bead or rhinestone. Bow ready

See how a girl does it in a master class in the following video

Video: Bow for discharge from the hospital. Master class from ribbons

It is not difficult to learn how to make such bows with your own hands, and when you have a lot of experience, you can even make money on this type of needlework. For example, you can decorate banquet halls or create accessories for costumes and hair.

Video: How to Make a Bow Flower from Ribbon?

Girls love to dress up, and they start doing it right from the start. early age... While they are small, mothers dress them up, dress them in elegant dresses and tie bows. Tying a bow is a whole science, and mothers should master it perfectly. In this article, we'll take a look at several ways to make life easier for moms. So, all you have to do is buy bows in bulk online and continue reading the article.

Method number 1

Pleated bow. Take regular tape, firmly fix the ponytail on the head with an elastic band. Tie the ponytail with a ribbon so that one part is about half the length of the other. Fold the long part three times and tie it with the short one.

Method number 2

Secure the ponytail with an elastic band, wrap it with tape and tie a knot so that both ends are the same. Get a tape that you can hold well. Good fit nylon tape, or even better, corrugated. Both ends of the ribbon must be folded and tied into a bow.

Method number 3

As soon as you learn how to tie ordinary bows, it's time to start corrugated. It can be easily fixed in the knot area. The bow should be tied right in the middle, tightening it with sufficient force. Re-tie and tighten firmly again, taking care not to loosen the first knot tied. Don't forget to straighten the edges of the bow.

Method number 4

The assembled bow looks very nice. To build such a miracle on your head is not special labor, if you know what and how to do. Take any tape, smooth or corrugated, pass a strong thread along its length and tighten it. This whole structure should be neatly sewn onto an elastic band that matches the color. You will get a beautiful bow with an elastic band, and you will not have to puzzle over how to tie it better. If you collect the bow not on a thread, but on a fishing line, then it will turn out to be more beautiful and voluminous.

Method number 5

The satin ribbon does not hold the texture well, so it will not work to build a lush bow. Node on satin ribbon it is better to do only single. The long, loose ends of the ribbon look very nice.

Ribbons can not be tied into bows, but weaved into braids. For these purposes, you need to take a longer tape. Weave the ribbon into the braid so that the long ends remain, then again grasp the braid with an oncoming movement and tie it with a single knot.

Mothers of girls need to master the science of bow tying as soon as possible in order to construct stunning hairstyles for their princesses.

Girls like to feel like princesses, but what makes a girl the most princess? Nice dress with frills and, of course, magical hairstyles with bows. Learning how to tie a bow on your hair is not difficult. The most important thing is to practice ahead of time before the X-hour, in order to be fully armed at the crucial moment and avoid pitfalls. The easiest way to tie a bow works for both long and short girlish hair. To do this, you will need a pre-purchased, factory-formed bow (you can have two if the hairstyle is planned to be symmetrically tailed; only two are the same), thin hair ties and a comb.

Gently comb the hair, collect in a ponytail. If there is only one bow - a tail on the back of the head. If there are two, then through a straight parting on the sides. Carefully (carefully at the same time!) Secure the tail with a thin elastic band, and attach an elastic band with a bow on top. If necessary, the base of the bow is fixed with invisible ones (you need to stab it from the center of the tail towards the head, as if with diverging rays). Comb the remaining tail. If your hair is long, you can braid the braid, fix the end of which with a regular thin elastic band and attach a factory-made bow on top. This is the easiest way to tie a bow on your head!

When the girl has long hair, for bows, you can use purchased long ribbons, beautifully weaving them into a braid, and tying the ends of the ribbons with a fluffy bow. But already on your own. Getting started is the same: comb your hair thoroughly and neatly. If you need two braids - the hair is parted, braids are braided in turn. It is best to secure the "waiting" side with a wide elastic band so that the hair does not get tangled during braiding. The base of the braid is fixed with a thin elastic band, under which the ribbons are neatly inserted. Weaving pattern into two ribbons: the total bundle (hair + ribbons) is divided into three strands, as for weaving regular braids, tapes are embedded in the side strands. Next, a braid is braided (alternately shifting the strands from side to center) of the desired length.

At the end of braiding, the hair is fixed with the same ribbons (the length of the ribbons should be at least twice the length of the hair), winding movements around the "tail", tying a thin, but dense - single! - knot after each winding. Having firmly fixed the braid, a bow is formed from the remaining length of the ribbons: the ends are folded in half in length, with these "loops" the bow is made, like on laces, tightened to half. Next, with the same "loops" you need to tie all the ribbons together, from long ends gradually folding beautiful curls. A little skill - and everything will definitely work out! When weaving a braid into two ribbons (in one braid), it should be borne in mind that it will turn out to be somewhat skewed, because from three parts one will necessarily be thinner than the other two.

To avoid such a bias (and at the same time to braid an even more voluminous, chic bow), they use not two, but three ribbons at once. The beginning is the same: the base of the braid is fixed with a thin elastic band, under which it is necessary to slip three ribbons. Now there is one ribbon for each part of the braid, so all the strands are the same. A braid of the required length is braided, at the end of which the ends are also wrapped with two (!) Ribbons, and one more remains inoperative. It will be a little more difficult to tie a bow from three ribbons than from two, since each ribbon bent in a loop will need to be tied in turn with the rest. The principle is the same, but a little more trouble. However, the result is absolutely amazing, so you can be patient.

The main nuances of creating tails, braids and tying bows: to create neat hairstyle it is best to collect the initial tail without falling out strands (the so-called "roosters"), because it will be impossible to get rid of them further. If some small "roosters" still work out, they can be combed with a frequent comb towards the tail (rays to the center) and grabbed by the invisible tail itself. When tying two bows - symmetrically to each other - or two braids, you will have to make sure that the initial tails are at the same level both relative to each other and in relation to the ears, back of the head, parting and the child in general. The tails look terrible at different levels - unless, of course, this is the original idea of the author.

When reinforcing the ribbons in the tail, it is better to use following method... The tape is inserted not by a cut, but by the end folded in half (about 3-5 cm), and the short tip is neatly hidden among the total mass of the beam. This trick is done in order to reduce the likelihood of the tape slipping out of the braid, as well as to camouflage an ugly cut (otherwise it will most likely stick out over the elastic). If an annoying nuisance has happened, the case can be saved by decorative wide "fabric" elastic bands, which are imposed directly over the beginning of the braid, at the base of the head. In this case, the main thing is to select ribbons and elastic bands in advance so that they are in harmony with each other.

On a hot, rainy or windy day, you want to lift your hair higher and secure it. Habitual ponytail and the bunch is already fed up, so there is an interesting and beautiful way collect hair. You can make a bow out of hair. Hair bow hairstyle will help you create unusual image... Do you like naughty and not ordinary? Then you will be interested to know how to make a bow out of hair with your own hands. Several detailed master classes will help you make a naughty bow out of your hair in a few minutes.

The "Bow" hairstyle is quite versatile, it can be easily made from curly hair and out of smooth ones. You can make a bow out of hair on the back of the head, or you can make it on the top of the head, and the length of the hair can play a role. This hairstyle can act as a day, as well as for evening out light. But there are a couple of essential nuances, ignoring which is the same as harming oneself.

1. Nuance first: you should not make a "bow" out of own hair if your curls are dull, thin, lifeless and brittle. Not only will the hairstyle not look dignified, it will also not be able to maintain its shape for the time you need.

2. The second nuance:"Bow" draws attention to the face of its bearer, therefore, if you have large nose, chunks or a wide forehead, this hairstyle will not suit you.

Hair bow for girls

This hairstyle is so cute that many will like it. At first glance, it seems difficult, but if you look at all the steps, everyone can do it. This hairstyle can be done on children's party or another holiday.

A beautiful bow hairstyle allows you to create a doll-like look on hair of any length. Great option for a festive occasion, for example, a hairstyle for a children's matinee.

STEP 1. Tie your hair into a ponytail.

STEP 2. Separate a small strand from the very center of the tail and remove it to the side, securing it with a clip so that it does not interfere.

STEP 3. Divide the remaining hair in the ponytail into 2 sections and gently comb each one.

STEP 4. Using the tongs from the base of the tail (near the elastic), curl each strand separately into a curl. If your hair is long, curl the strand in several steps - it is important to get a beautiful spiral curl.

STEP 5. Making a bow. Roll the strand in the form of a half bow, securing it with invisible ones near the base of the tail. Do the same on the other side.

STEP 6. Now we take the strand left at the beginning, it can be fixed with an invisible or transparent elastic band to the tail, and we braid a pigtail from it. The main thing is that this pigtail is in the center of our bow.

STEP 7. Roll the end of the braid and tuck it into a bow.

Cute hairstyle hair bow step by step instructions

How to make a bow out of hair: video tutorial

This video tutorial will teach you how to make a hair bow in a few minutes. Showing in detail what to do. Prepare in advance 2 thin hair ties and a few bobby pins.

How to make a bow from hair below the shoulders: photo tutorial

You will also need invisibility, two hair ties, a comb, and styling products. Styling spray if you do not have obedient hair and nail polish to set the hairstyle. Next, see the photo instruction.

What we need: a hair comb (with sparse teeth), several invisible hairpins or hairpins, two elastic bands for thin hair, hairspray. In order for the hair to fit better in the hairstyle and not crumble, it must be washed and applied with balm before styling.

Collect your hair in high tail and tie it well with an elastic band. Then, using the second elastic band, fold the tail in two, so that the ends of the tail are in front - falling on the forehead, and secure.

Divide the resulting bunch into 2 parts using the ends of the tail. Secure the ends at the back with invisible ones. Spray your hair with nail polish.

Hair bow on the head: a detailed photo lesson

Low bow - interesting hairstyle... Suitable for daily trips to school, institute. You need to do this hairstyle in the same way as in the previous lessons, but only the tail needs to be tied a little lower.

Other hairstyles

Hair can be collected and made a bow out of them in another way. For this option, you will need one elastic band and several hairpins or invisible pins.

A bow on long, loose hair is very romantic and feminine.