Good afternoon, dear needlewomen!

Many will remember unforgettable moments from childhood - how great it was to do paper boats and run them along the river or at least a puddle! Years have passed, and now your hands have forgotten how to make boats. Now that you have children of your own, it's time to remember and introduce your child to this exciting spring activity - making paper boats and putting them on the water!

You can come up with a game: lay down a few boats with a child and send them to the river for a bet: whose boat will sail longer, that is the winner.

In this article, you will learn how to make a paper boat with your own hands, as well as watch the video instructions.

How to make a boat out of paper

Did you know that the origami technique is useful for a child in that it develops thinking, attentiveness, logic and fine motor skills? Therefore, arm yourself with a piece of A4 paper and start DIY crafts. For work, you can take a white sheet, which you can later repaint in any you like, and it is also better to take paper that does not get wet after 30 seconds spent in the water. There is one more secret of "vitality": a paper boat can be coated with melted beeswax or with paraffin wax, this will give the paper moisture resistance.

First, we will acquaint you with the diagram of the paper boat, then we will proceed to step-by-step photos and videos.

Paper boat folding scheme

1. Fold a white sheet of paper in half. (Fig. 1) Bend the two upper corners of the rectangle at right angles to the center point (Fig. 2)

2. Bend up on both sides the free edges of the sheet on both sides (Fig. 3)

3. Turn the corners as shown in Figure 4 so that the whole composition folds into a triangle (Figure 4)

5. Bring the corners of the bottom of the composition together (Fig. 5) so that we end up with a square (Fig. 6).

6. Fold the bottom up to form a triangle again (fig. 8)

7. We hold the composition by the corners and carefully square it.

8. Pull the corners until you get a boat, do not forget to align all sides of the ship well, this will give it stability and accuracy.

Paper boat.

Perhaps every boy in his childhood folded paper boats, and most likely, having become a parent, not everyone will be able to fold a boat out of paper for one or two times. Let's refresh our memory and origami technique and fold the boat with our own hands together with the "Craftswoman"

As we said, make a craft paper made of thick paper that will last longer in the water. Beeswax or paraffin will increase the moisture resistance of the boat.

How to make a stable and beautiful ship, how to decorate it? You can decorate the boat, firstly, with acrylic paints, and secondly, you can make a flag on the ship from toothpicks and cloth, napkins or paper and attach it so that balance is maintained.

Now let's move on to the paper boat folding technique.

We only need a sheet of A4 paper.

Fold the sheet in half.

And again in half - to make a fold line.

We unfold the last bend.

We will schematically mark it with a dotted line.

We bend the upper corners to this dotted line.

Carefully make sure both ends are symmetrical and come together in the middle of the craft.

Bend the lower free ends up on both sides.

Bend the protruding corners neatly.

Here's what happened on the one hand.

On the other side, do the same.

Fold the workpiece across, as shown in the photo.

Open the boat to make a rhombus.

Measure a small distance from the top corner, place a mark or by eye. Fold the bottom edge to this point.

On the second side, we do the same.

Now we need to open our paper boat again. A little more, and the do-it-yourself craft will be ready!

Now grasp both sides of the ship with your fingers.

Pull them and open the boat.

This is how it should turn out. Now you need to straighten the boat well.

It is important to straighten the boat with high quality, otherwise it may lie on its side in the water, pay special attention to the bottom.

Learning to make a boat out of paper is simple, you probably saw this by looking at the instructions. The systematic folding of paper using the origami technique develops creative thinking, logic, hands, horizons and eyes. In the origami technique, you can make anything you want: boats, planes, insects, flowers, animals, bows - whatever your heart desires!

Therefore, a paper boat is just the beginning! Next, make a paper boat, a paper cruiser, and so on with your child! Below there will be video tutorials on how to do them.

How to make a boat out of paper video

How to make a boat out of paper video

How to make a sailboat out of paper video

The text was prepared by: Veronica

An origami boat gives every adult an opportunity to plunge into the world of childhood, and restless children become dexterous captains in their dreams. The main thing is that to immerse yourself in the world of fantasy and interesting games, it is enough to have only a piece of paper.

Affordable paper toy

Until computers appeared in our homes, the kids spent time at the construction origami boat, consoled herself by launching them on the water. The spring streams especially attracted almost all children. As soon as the little captains did not have to manage their ship! Many were gaining their full cheeks of air and urged on their regattas, someone guessed to push him with a willow twig, just to come to the shore first.

Many generations of parents grew up on paper boats and received scolding for wet feet. But at the same time, I always wanted to build a new regatta and go outside. Today is the best time to remember old skills and, perhaps, learn something new in the art of origami.

Folding subtleties

Let's start with the most affordable and basic models. origami boat. It is worth noting that the models made according to the proposed schemes below will perfectly show themselves in swimming. You can put a light, small toy in your regatta, send it on a long voyage. In addition, the manufacture of boats from multi-colored leaves looks bright and striking. Make sure by looking at the presented photo.

Unlike the common square sheet of paper when folding many origami toys, you will need a rectangular sheet to make a boat. Put the scheme we are proposing in front of you and start acting.

As shown in the diagram, the workpiece is folded in half. At the second stage, it is necessary to bend both upper corners to the center. In this case, a right angle must be observed. We have free edges of the paper. They must be bent up and the corners are bent inward. In the course of such manipulations, you get a triangle. It is necessary to make a square out of it by bringing together opposite angles. In this case, the fold line is fixed. Bend the bottom corners on both sides and bring them together at the top. Again you get a triangle. We repeat the manipulations - we make a square according to the previous example. The last step is pulling the top corners out of the square. As a result, you get the boat indicated in the photo.

Children always want to show off to each other not so much the color scheme of the ship as its design features. Therefore, along with the above-described boat, you can build a regatta with two pipes. The schematic for the guide is shown here.

Of course, paper models are not as durable as boats made of other materials. But their main feature is the ability to manufacture an indefinite number of ships. The boat from this photo will certainly be the first to arrive at the finish line.

It is paper boats that instill carelessness in childhood, give moments of joy and happiness.

Children from a very young age are very fond of fiddling with paper. They cut it out of it, fold it this way and that. And sometimes they just tear. To make this activity useful and enjoyable, teach your child how to make a boat or boat.

For you, this is a very simple craft, but for a kid - a real ship! And if you make several boats, then - a whole flotilla!

How to make a boat out of paper?

Take a sheet of paper in landscape format.

Fold it across exactly in the middle.

Mark the center on the fold. Take the sheet at the top corner and fold it diagonally from the marked middle so that the fold is vertical.

Do the same with the second side. You should have a sharp top shape. Fold the free bottom of the sheet up on both sides.

Take the workpiece from the bottom on both sides in the middle and pull it in different directions.

Smooth it with your hand to get such a square.

Bend the bottom corners on both sides up to the very top.

Now pull the craft out of these corners to the sides.

You will have a flat boat.

You just need to straighten it to give it stability.

How to make a boat out of paper?

Fold a sheet of landscape format diagonally.

Cut off the excess edge to make a square. Connect the other two opposite corners as well. Expand the sheet.

Connect each corner to the center.

Make sure that the workpiece is not skewed.

Turn the sheet over. Fold it again, aligning the corners with the middle.

Your square has become smaller.

Turn the workpiece over again and bend the corners in the same way as the first two times.

You have four small squares with cuts on top.

Straighten the two opposite squares by gently sticking your finger into the hole and giving it a rectangular shape.

Grab the inner corners of the other two opposite squares and gently pull in both directions. The two rectangles you made before will connect. It turned out to be a boat.

As you can see, the boat is bigger.

If you want to make a boat the same size as the boat, then make it from half of the album sheet.

If you want to do something a little more difficult, try making a flower out of paper. And now, to bring the kid endless joy, pour warm water into a bowl, gently lower the boat and boat on its surface, and let the child pretend that he is a real captain!

Tags: crafts, creativity

MAXCACHE: 0.44MB / 0.00029 sec

Let's consider step by step how to fold a boat from a sheet of paper using the origami technique. To give yourself confidence, watch the video on the origami paper boat on the Internet. Let's get down to the craft and find out how to make a paper boat. Try to assemble one of these wonderful origami boats from paper with the diagram given in the article below. An origami boat can also be made from pages of glossy magazines.

Ship. Origami. Master class with step by step photos

Everyone in childhood let boats through the puddles, into the river or just in the bathroom. There are many paper craft models made using this technique. But origami classes do not require special qualifications and skills. Watch the video "origami paper boat" at the end of our article, where you will be offered various methods of folding boats, sailboats and steamers. Take two corners and form a boat. It is a real miracle for children when you, like a magician, create three-dimensional objects from flat paper.

To make such a craft, you need not a square sheet, as for many origami, but a rectangular one. Now it remains to take the upper corners with both hands, gently pull on them, and the boat will open. We straighten the middle, adding volume. The base of the boat is ready! In the upper part of the boat we pierce a hole and insert a flag.

Our do-it-yourself master classes will help you become real needlewomen and make various crafts, origami, decoupage and beading. You will learn how to make extraordinary products from plastic and plastic bottles, how to sew a Tilda doll, find knitting and beading patterns. Origami is the ancient art of paper folding.

How to make a boat out of paper in stages

A paper boat keeps well on the water (until, of course, the paper is completely wet) and you can even put small "passengers" in it, for example, toys from a kinder surprise. If you decide to make a boat out of a white sheet of paper, then I advise you to invite your child to paint it with colored pencils - it will be much more beautiful.

In the process of making a boat out of paper, the son tried to figure out himself how to fold the boat according to the scheme. And he did well. As I said above, when creating a paper boat (origami), we used the scheme, looking at which Lenya was engaged in designing the ship (at least he tried, which is already good).

We bend the upper corners of the future boat at right angles to the center. My baby loves to let such a boat in the bathroom when he bathes. Prepare a sheet of paper of a known A4 size. Make a square out of it. Fold out from the horizontal side and the vertical side.

There are many models of boats, but this one is considered the most difficult, but even a child can handle it. To assemble an origami boat, you will need a square piece of paper, you can color. Now bend 2 corners back, each corner at a different distance (these will be the sails of our origami boat). The origami ship is ready to sail. Assemble a simple and beautiful origami ship with the children.

And he also asks. Today I went to kindergarten with one. And the other day we did an experiment with water and paper, he really liked it. As a result, not only flowers, but also a boat were on the plate, and I immediately remembered how to do it. I remember that when I was a child, we used to do such things ... In the meantime, it is too early for us to launch boats due to the weather.

And last year Olesya's favorite pastime in the spring was to launch boats along the streams. Super! They immediately sat down with a small boat and made a boat. We also made such boats. Lera has probably already grown out of boats, if only the process of creating origami will interest her. Great! You have a whole flotilla! I remembered how to make a boat, but not a steamer. Thank you for a very detailed and understandable description! Boats are especially good in spring when streams are running. We even took neighbors' children and launched boats.

Therefore, we move on to the simplest schemes, even a child can assemble this origami boat. The scheme of the boat is very simple and straightforward, follow the steps and you will succeed! And we will help you with this! So, take a piece of paper of your favorite color and go! First we need a square piece of paper, fold and unfold it diagonally to make the markings.

Perhaps everyone is familiar with a paper boat. This week, my children and I were making a paper boat according to the (origami) scheme, so that it could be set free to sail while walking along the streams with the children in spring.

We look further:

Paper steamer

So, in the previous lesson we made a regular paper boat. And here is another product that we will tell you about. This is a steamer with two pipes. It is not at all difficult to make it. You can even run him into the bath and see how he floats there. Of course, a paper steamer will not float in water for a long time and will quickly drown, but it is enough for a child to see his creation in reality and how it will move in the water. We present to your attention a video and photo-scheme of origami making a steamer out of paper.

Video

Photo

So, in order to make a steamer out of paper, you will need: 1. A sheet of paper (A4 or landscape sheet is suitable). 2. Scissors.

Stage 1. Let's make a square out of a rectangular sheet. To do this, we wrap the upper right corner of the sheet in such a way that the upper side of the sheet lies on its left side. We bend and cut off the excess lower part of the workpiece. Expand the workpiece.

We have one fold line, but we need to outline the second. Fold the sheet with the upper left corner to the lower right corner and unfold it back. Here's what we got.

Now bend the corners towards the middle.

Making ships out of paper is one of the most favorite and entertaining activities for adults and children to relax. Making such paper crafts is not difficult. It is enough to follow the recommendations of the master classes, and the craft of any complexity will be easy to manufacture.

To begin with, you should understand that a paper ship, when it comes into contact with water, is quickly saturated with moisture and sinks. Therefore, to avoid moisture absorption, the bottom of the finished craft must be treated with a water-repellent compound, for example, petroleum jelly or paraffin. You can also use glossy paper magazine sheets to craft your craft.

To make a simple boat, you need a square sheet of paper of any size (the larger the sheet, the larger the ship will be) and a substance that protects against moisture.

How to make a ship out of paper - procedure:

1. Fold the paper sheet evenly diagonally, smooth it out.
2. At the resulting triangle, bend up a narrow strip, this is done on the right side, straighten it.
3. Next, the same strip must be bent back and smoothed.
4. Expand the square, there should be 3 fold lines on it: an outer diagonal fold and 2 inner folds on the sides of the square.
5. Fold the ship along the folds: direct the diagonal center fold up, the side folds go down, and the stripes become the sides of the ship. The top corner can be folded inward.
6. Lubricate the ship's bottom with a waterproof compound.

Classic paper boat using origami technique

To make a paper craft-ship, guided by the origami technique, you will need:

• rectangular sheet of thick paper;
• toothpick;
• colored paper;
• scissors;
• glue.

Instructions:

1. Fold a piece of paper in half, with the fold parallel to the smaller side of the rectangular piece of paper.
2. Place the resulting double rectangle with a fold up and mark the center line. Bend the corners of the rectangle to the center line. In this case, 2 narrow free stripes should remain at the bottom.
3. Further, the 1st lower strip is bent up, the workpiece unfolds, the 2nd strip is bent in the same way.
4. Open the workpiece from the inside and fold it into a square, press it down, smooth it out. In this case, the initial fold should become the diagonal of the resulting square. Straighten the corners. The top sides of the square should be fixed, the bottom - free.
5. Bend the top sheet of the square diagonally and combine the corners, do the same on the opposite side. In this case, the craft takes the shape of an isosceles triangle.
6. Open the workpiece from the inside, combine opposite corners, thereby forming a square.
7. Expand the ship by pulling the upper corners.
8. Spread out the middle.
9. Roll a small strip of colored paper in half, cut out in the shape of a flag. Place a toothpick greased with glue on the fold, press down. Insert a toothpick into the center of the top of the ship.

Large paper boat

In order to make a large ship with a sail out of paper, you will need a large square sheet of paper and a glue stick.

Work process:

1. Divide a sheet of paper with a central fold into 2 equal rectangles.
2. The sides are folded towards the center fold.
3. Mark the center of the resulting elongated rectangle on the long side, bend its sides to the center. Thus, a square is obtained.
4. Now you need to shape the sides of the ship. To do this, straighten the corners and fold in a different shape. It is better to start from the upper right corner: the right side of the square rises, the upper corner is bent up diagonally, the corner must be smoothed well inside.
5. Close the right side of the square. Smooth out the resulting triangle on top.
6. Following the given order of actions, form the lower triangle. The right side of the square is now a trapezoid.
7. Fold the left side of the square with the same trapezoid.
8. Turn the workpiece over. Select a diagonal line on the square.
9. Fold the workpiece along the marked diagonal.
10. Turn the craft over. Align the downward angle with the parallel corner.
11. Fasten both corners with glue.

Steamer with two pipes

To make a paper model of a steamer with 2 pipes, you only need a square sheet of paper.

How to make a double tube paper craft:

1. Fold a sheet of paper diagonally, mark the point of intersection of the diagonal lines.
2. Bend each corner of the square to the center point, smooth out the folds. This is a smaller square, consisting of 4 isosceles triangles.
3. Next, you need to turn the square over and bend the corners to the center from the opposite side.
4. The workpiece is turned over again, the corners of the square are again added by triangles with apex at the center point. The folds must be smoothed carefully.
5. Turn the model to be produced again. Fold back 2 opposite triangles, form pipes out of them, straightening the holes from above with your fingers.
6. The 2 remaining triangles must be lifted and spread in different directions, while the craft is folded in half, the lower part unfolds, the tops of the side triangles must be directed upwards. This is how a paper model of a two-tube steamer is obtained.

Ship with sails

To make a paper ship with 2 sails, you only need a square sheet of paper. For such a model, it is better to use one-sided colored paper, then the sides of the ship will be colored, and the sails will be white.

How to make a sailing ship out of paper - the order of work:

• Fold a sheet of paper in half to make a rectangle, unfold. Fold in half in perpendicular direction again, unfold. Now the big square is divided by folds into 4 small equal squares.
• The workpiece is turned over, diagonal folding is performed on the opposite side. The fold lines are smoothed well.
• Make a second diagonal fold and turn the workpiece over. In this case, the front side will be the colored side of the sheet.
• Next, you need to place the paper sheet with a diamond with the white side facing you. Bend 2 opposite corners (upper and lower) to the center point, thereby forming 2 isosceles colored triangles. On the sides there will be white rhombuses, the diagonal folds of which will be horizontal and should be directed upwards.
• Now the sails are being formed: the left white rhombus rises and folds in half along the pre-selected diagonal fold, forming a white triangle; the right white rhombus is folded in the same way; then you need to bring together the white triangles and smooth out the lower colored triangles, which will later become the lower part of the ship.

• For the originality of the craft, you can reduce the height of one sail, this is done like this: the white triangle bends down and bends up again, but the last fold should be located a little lower, hide the resulting fold between the blue triangles.
• The bottom corner of the colored triangle must be bent towards its base in order to form a flat bottom. The bent corner will serve as a support.

Ocean liner

To make an ocean liner out of paper, you will need the following materials and tools:

• paper sheet in the form of a square;
• scissors;
• sewing thread;
• multi-colored ribbons that are used to decorate gift wrapping;
• felt-tip pens or colored pencils.

Manufacturing instruction:

• Fold a sheet of paper in half along diagonal lines, mark the point of intersection of the diagonals.
• Place a rhombus in relation to yourself.
• Bend the upper corner to the middle so that the vertex of the resulting triangle coincides with the point of intersection of the diagonals, smooth it out.
• The next fold line will be in the same triangle slightly above its base.

Along this line, the triangle is bent in the opposite direction.

• The top of the triangle is bent towards itself.
• Next, a sheet of paper is folded along a diagonal fold.

The previously folded triangle is positioned on top, it should look like it is inserted inward.

• In the lower widest part, the sides are formed. The edge of the paper sheet, starting from the corner, is folded up, while the lower folds should not go at right angles to the diagonal fold.
• Decorate the sides of the liner with ribbons, draw portholes, anchors and the name of the ship. Cut triangles from paper tapes, glue to a thread. Attach one end of the string to the bow of the liner, the other to the top of the ship.

Speed ​​boat

To work on a paper model of a racing boat, you will need a sheet of paper of a regular size (A4), scissors, and colored pencils.

The procedure is step by step:

1. The rectangular sheet of paper is folded in length, the fold should be located exactly in the middle of the sheet.
2. Cut a sheet of paper along the fold line.
3. Bend the right corner in the upper part of one resulting rectangle, forming a right-angled triangle. One of the sides of the rectangle must exactly match the side of the rectangle. Carry out similar actions with the left corner of the rectangle. Mark the intersection of the folds.
4. Fold the side of the rectangle, smooth it out. The fold line should be on the horizontal line of the center point.
5. Turn the workpiece over. At the top of the rectangle will be a square with the diagonal folds pointing down. Join the side triangles horizontally and smooth out the resulting upper triangle.
6. Fold the exact same triangle from the opposite edge of the rectangle.
7. Raise the upper triangles, and bend the sides of the rectangle in narrow stripes to the center line, smooth out.
8. Bend the corners of one of the triangles to the base, while making the vertical folds as long as possible.
9. The triangle from the opposite edge is bent to the middle of the upper part of the workpiece.
10. Next, the corners of the small triangle that turned out to be on top are bent to the center line. A narrow vertical stripe forms at the base of the triangle.
11. The corners of the lower, larger triangle are bent at right angles.
12. Color the boat with colored pencils.

Double catamaran boat

The paper model of the catamaran boat will consist of 2 hulls, which will require a square sheet of paper.

How to make a ship with two hulls out of paper:

1. Diagonal folds are made on a sheet of paper. The horizontal fold runs down the center of the paper through the intersection of the diagonals.
2. The workpiece is turned over so that the diagonal folds are directed downward. The side triangles of the square fold to each other along the center lines and hide under the upper triangle.
3. In the resulting double triangle, the corner opposite the longest side bends towards the base and disappears inward.

How to make a ship out of paper: another option for making a catamaran

The second option for making a paper catamaran boat:

1. A square sheet of paper is folded diagonally. Then 2 more folds are made, which divide the sheet into 4 equal squares. Each side of the square is folded towards the center line.
2. Next, 2 adjacent stripes, ¼ of a square, are folded inward. The resulting corner is smoothed out. At the other end of the same strip, the same corner is made in the same way. The top is now a trapezoid.
3. On the opposite side, fold the same trapezoid.
4. Make a horizontal fold that separates the trapezoids. Straighten the figure.

Ship-motor ship

To make a boat out of paper, you will need scissors and a sheet of thick paper.

Performance:

1. Bend the sheet diagonally, thereby forming an isosceles right triangle. Cut off the remaining rectangular strip.
2. Designate the diagonal folds of the resulting square.
3. Bend each corner of the square, directing to the point of intersection of the diagonals.
4. Flip the resulting smaller square. Bend the corners back to the center point. Turn the workpiece over again and perform the same actions. As a result, you should get 3 layers of addition.
5. Flip the square. On this side, the corners of the square will be rhombuses, each diagonally divided into 2 triangles. Uncover 2 opposite diamonds.
6. Unbend the figure by pulling the remaining folded rhombuses, straighten it.

Origami boat

To make a boat out of paper, you need a sheet of thick square paper.

Work process:

1. Fold a sheet of paper horizontally in half. In each resulting rectangle, select the center line of the inflection.
2. Fold the upper unconnected corners of the rectangles to the dividing folds. In this case, the rectangular triangles should be on the outer sides.
3. The bottom corners of the rectangles fold together in the same direction towards the center fold. Now we get a shape from 2 layers, in the center of which there is a rectangle, where the sides are the bases of 2 triangles.
4. Further, the upper part of the first layer of the figure is bent along the marked horizontal fold with a "pulling" movement. The upper part of the second layer is bent away from you. After the performed actions, you should get an inverted trapezoid.
5. Spread out the workpiece from the inside. Fold the corners inward along the horizontal dividing line.
6. Spread the corners in different directions, open the boat, level the bottom.

A boat made of colored paper

To make a craft out of colored paper, you need a two-sided colored sheet of paper in the shape of a square with a side equal to 20 cm.

How to make a ship out of paper - manufacturing process:

• Fold a sheet of paper along both diagonal lines, the folds must be carefully selected.
• Place a sheet of paper so that the diagonal folds are directed downward, bend one corner of the paper square to the center point (the intersection of the diagonals).
• Fold the sheet in half along the marked diagonal. The folded corner in the previous step will be on the outside.
• Fold the resulting figure along the second, previously outlined diagonal fold.
• The figure in the plane should turn out in the form of an isosceles triangle. Bend up the top of the workpiece. Expand a pocket inside it, the upper part of which forms a triangle. The folds of the triangle are carefully smoothed out, the whole figure is pressed against the plane of the workpiece.
• Now the entire workpiece is divided into 2 parts: on the right is a square, on the left is a triangle. The upper part of the square consists of 2 superimposed triangles. The sides of the surface triangle are bent at an acute angle, rise and form a small triangle, which will be located perpendicular to the plane of the workpiece.

• Then this triangle opens up again, its top is bent, thus forming the pipe of the future ship. The triangle now folds again without a vertex.
• The top and left sides of the square fold over to the center line and return to the starting position.
• The upper right corner and the opposite lower left corner are bent to form triangles.
• The center of the square rises, the whole structure also rises, while the square is folded, only the triangle with the cut off top (the ship's pipe) remains visible.
• The bottom of the sheet of paper is folded up in a wide strip. The workpiece is turned over, and the same strip is bent in the opposite direction.
• The craft unfolds neatly, the last fold turns upwards. Fold the workpiece, smooth it out.
• Fold the rear edges of the sides in rectangles and nest into each other.

How to fold a paper boat in a box

Making a ship out of checkered paper is easier than out of unmarked paper: straight horizontal and vertical lines are clearly marked on checkered paper.

The craft is folded in this order:

1. An ordinary checkered notebook sheet is folded in half in the horizontal direction.
2. The center is marked on the resulting rectangle. The top corners of the rectangle are folded towards the center line.
3. The upper lower rectangles are folded up, their corners are folded along the edges of the triangle.
4. The triangle unfolds and folds into a square, the bottom corners are folded along the center line in different directions, smoothed out.
5. The triangle expands again to form a square.
6. Open the figure by pulling the top of the blank in different directions, straighten the ship.

A table with an estimate of the complexity of making ships out of paper:

Name of the craft	Difficulty level
Yacht	1
Classic ship	2
Big ship	2
Steamer with two pipes	2
Ship with two sails	2
Ocean liner	1
Speed ​​boat	3
Catamaran boat with two hulls	2
A boat	2
Large origami boat	3

Making paper ships is an entertaining and educational activity. Almost any basic ship model can be made from paper. There are many different master classes on the network with detailed descriptions and photos, according to which you can easily make such a craft.

Article formatting: Natalie Podolskaya

Video about making paper boats

Video on how to make a ship out of paper:

Parents have been making paper boats for their children, perhaps since the time of the invention of paper. After all, this simple toy gives children a lot of joy when they launch it in the bathroom, pond, stream, puddle or even on the river. In the photos below, you can see a vivid example of this magnificence.

The sail is lonely. In the fog of the blue sea! ..)))

Here they are, handsome. Amazing, isn't it?

By the way, don't you remember how to make this beauty? It doesn't matter, because our today's article is recognized to help you with this!

What paper is the best to make a boat from? Tissue paper is perfect for making a paper "craft", but you can fold it from a newspaper or an ordinary notebook sheet.

Let's see how to make a paper boat in the most common way.

Following the description and visual illustrations below, you can easily and easily make a paper boat. So…

All we need to make a paper boat is an ordinary rectangular piece of paper. Well, straight arms, of course. Well, let's get started.

Fold a rectangular piece of paper in half and fold it vertically.
Bend one top corner to the centerline
Fold the second corner to the midline
Fold the lapel up on one side, as shown in the figure
Fold the second lapel up
Grab the center points and drag to make a triangle into a square Bend a corner on one side, as shown in the figure, unfold, and do the same on the other side.
Bend the second corner
Stretch center points

We all added up in childhood paper boats, but time passes, and we forget what we did in childhood with our eyes closed. And children grow up, and you can entertain them not only with toys, but also with all kinds of improvised means. You can distract the child while you are sitting in line or driving somewhere using plain paper. It is enough to make a boat out of paper and your child will be distracted for a long time, because he wants to make such a boat himself.

When I started preparing for a trip to the Black Sea, I had a question how to entertain a child on the train. And here paper crafts are just a gorgeous option. After all, a paper boat can not only be made, it can be painted, decorated, etc. It turned out that the options for making a boat out of paper are not one, but six.

A paper boat is an easy option.

Everyone did this boat in childhood. This option turned out to be the simplest, and the boat turned out just once. Try to make such a boat with your children, they will be delighted. Such a boat will not sink in water, and you can safely let it into a trickle. Immerse yourself in childhood with your children.

paper boat - standard

For the manufacture of a boat, it is better to use thicker paper than ordinary paper. Then your boat will serve you longer, it will sail longer in the seas and oceans of your child.

A boat made of paper is a steamer.

This version of the ship is more complicated, but all the same, a child can do it even on his own. You just need to show him a couple of times how to collect this option.

paper boat - steamer

Your child will really like this option, all the more it is a pleasure to decorate this steamer.

A boat made of paper is a boat.

It is quite simple to make a boat out of paper. The child was delighted after I started making him the 3rd version of the paper craft. Therefore, you can show a real master class to your child. By the way, the boat is very stable on the water, and launching it into the water brings a lot of positive emotions.

Paper boat - boat

The only small problem is that at the last step it is necessary to turn the boat inside out, and this must be done very carefully, the child may not be able to cope.

A boat made of paper - a catamaran.

This boat looks like a catamaran, but to be honest I don't really like it. And it was not possible to collect it the first time and it does not look quite like a boat, but of course I will publish the scheme of its collection. Maybe someone will like it.

Paper boat - catamaran

A boat made of paper is universal.

This boat is very beautiful, strong and stable. I liked her the most. It took a little longer to do it than the first one, but it turned out the first time.

Universal paper boat

As a result, a very beautiful boat turned out; by the way, you can put soldiers or small toys in it.

A ship made of paper - military.

The most difficult option, even not all adults can do it, but after a couple of attempts, you will still succeed. This warship will help your child develop fine motor skills of hands, which is very important for the child's psychophysical development.

Paper ship - military

If you take A4 paper, from which to make a square, etc., then the boat turns out to be small.

P.S. Don't forget to subscribe to new articles. Join the "Katya's Blog" group in contact: http://vk.com/blogkaty
More interesting articles.