Youth and beauty 

What can be crocheted from mohair. Mohair sweaters for ladies with knitting needles: schemes and descriptions. Knitting a fluffy warm sweater

Mohair yarn is one of the lightest yet warmest yarns to knit. It is made of goats. The name muyhyar itself means "selected fleece", which already indicates that this material is of high quality. The special processing technology makes the yarn thin and delicate. knitting needles brings true pleasure to needlewomen, the result of which will be light, beautiful things. Readers can learn about the properties of this thread and the peculiarities of working with it in this article. There are also descriptions of the execution of garments from mohair and photographs of finished products. Focusing on them, craftswomen will be able to knit wonderful warm outfits for themselves and their loved ones.

Mohair yarn properties

A thread made from angora goat fur has a number of advantages:

  • Hypoallergenic. The high-tech process for the production of mohair allows you to obtain yarn of excellent quality. Natural mohair does not cause any allergic reactions. Even if a thing made of this type of thread is put on a naked body, then neither itching, nor redness, nor any other irritation of the skin will occur.
  • Comfort. Items knitted from mohair yarn retain heat well. At the same time, it is not hot in them, since the canvas easily lets air through.
  • Strength. Despite the fact that natural mohair thread is very thin, it is very difficult to break it. And the canvas knitted from it retains its shape and structure well throughout the entire period of wear.
  • Wear resistance. During washing and drying, it is important to comply with all the rules for performing these procedures, then the product does not deform (does not stretch or fall off). Mohair lends itself well to painting with special agents, followed by good performance, that is, the color during processing of the product does not wash off and does not fade.
  • Ease. Knitting from mohair with knitting needles allows you to get almost weightless things as a result. A shawl, cardigan, sweater, beret or other wardrobe items made from this type of thread are practically not felt on the body, but at the same time they warm well and create a festive and delicate image.
  • Security. Mohair thread gets wet slowly. This property can be very useful if you get caught in the rain. A sweater or jacket made of mohair can save the body from hypothermia for a certain period of time. Yarn of this type ignites slowly, which is also another advantage.

Mohair yarn classification

The main types of mohair threads are divided into types depending on how old the animal is or whose wool is the starting material. Kid Mohair yarn is the thinnest and most delicate. The thickness of the villi is no more than 27 microns. Such a thread is made from wool of kids, which are sheared for the first time. Air shawls, stoles, scarves, children's things are made from it. Knitting from kid mohair with knitting needles can be compared to weaving lace. Products look like thin cobwebs.

As a result of shearing animals that are 1 to 2 years old, wool is obtained from which Goatling yarn is made. It is slightly thicker and tougher, but this does not impair its qualities and properties. It is used to make sweaters, vests, cardigans, dresses and other types of clothing.

The wool of an adult goat (from 2 years old) is converted into Goatling mohair as a result of processing. This thread differs from the previous ones in a higher degree of rigidity and strength. At the same time, it retains all the properties of mohair. Its thickness is 30 microns. In addition to garments, yarn is used to make blankets.

Mohair Yarn Composition

In order for natural woolen fibers to keep their shape well, it is spun with the addition of a court, a material that holds the hairs together. Therefore, it would be wrong to say that mohair is 100% wool thread. Today's technologies make it possible to produce yarn, which contains 83% of Angora goat wool. If you see yarn with a higher number, be aware that in front of you a fake and knitting from mohair with knitting needles (just such a "mohair") will most likely not bring you any pleasure. A combination of yarn with other types of yarn is allowed. In this case, goat hair makes up from 10 to 80% of their total amount, which must also be indicated on the label.

If you decide to make a product from this type of thread with your own hands, then be sure to take note of the following recommendations.

Having decided on the model of the future product, you need to choose yarn and knitting needles. When buying threads, carefully study the information on the label attached to the skeins. If the composition of the thread suits you, pay attention to the recommended size of the knitting needles for work. The quality of the future knitted fabric depends on them. mohair is obtained by using a tool whose thickness is 2-4 times the thickness of the yarn. A warmer and denser fabric is made with a small number of knitting needles.

Before you start knitting a mohair model, practice your chosen pattern. At first it may be difficult for beginner needlewomen to work with such a thin and soft thread, but after knitting several rows of the pattern, your hands will themselves "understand" with what tension to hold the yarn and how tightly to tighten the loops. After that, you can start making the product itself.

The next part of the article presents models of garments that can be knitted from mohair. Focusing on them, you can make such beautiful and warm things as a scarf, sweater and jacket with your own hands.

How to knit a scarf?

Knitting a mohair scarf with knitting needles using technology is no different from making it from a different kind of yarn. When calculating the loops, keep in mind that the thread is thin, so their number will be greater than if you knit a product of the same size, but from more If you plan to get a scarf as a result of work that will be used specifically to warm the neck, then it is better to do it with a thread in two or even three additions with patterns from front and back loops: elastic bands of different types, pearl pattern, "checkerboard". Then the canvas will turn out to be voluminous and very warm. Lightweight women's scarves resembling lace are knitted in one thread. They are more used as a decorative adornment of the general image. For the manufacture of such accessories, they are used from mohair. The photo shows a diagram of one of these drawings. A scarf or shawl made by him will turn out to be weightless and very delicate.

Knitting a fluffy warm sweater

The model of this wardrobe item, the manufacturing process of which is described below, belongs to the "unisex" style. It will suit both men and women. Based on the calculations in this master class, the result will be a sweater size 48.

For work, you need knitting needles on fishing line No. 5 and 400 g of mohair / wool / polyamide yarn (100 m / 50 g).

Knitting for sweaters made of mohair or any other yarn, start at the bottom edge. Cast on 82 stitches to make this model. Start working on creating the front part. Perform the elastic by alternating one front loop and one purl loop. Knit this pattern until the plank is 6 centimeters wide. Next, go to the execution of the front surface. Knit the fabric in a straight line until the total length of the piece is 57 cm. Now make reductions to form the neckline. To do this, close the central 8 loops, and then tie each shelf separately, continuing to reduce the number of loops for rounding. In every second row, from each inner edge, close 1 time with 2 loops and 3 times with 1. After that, close the loops that remained on the knitting needles. The total height of the canvas should turn out to be about 64 cm. Similarly, knit the back part, but only for the neckline cut at a height of 64 cm, close the central 12 loops, and from each edge 1 time, 3 loops.

Next, knit mohair sleeves. On the needles, cast on 32 loops and sew with an elastic band 1 x 1 strip 5 cm wide.In the last row, add 24 loops at an equal distance from each other. Knit the sleeve further with an ordinary front stitch, performing additions to form a bevel. To do this, add details on both sides in each 4th row, 1 loop 13 times, and then in each 2nd row, 1 loop 4 times. When the length of the sleeve reaches 44 cm, finish the work. Tie the second part in the same way.

The mohair model is now finished. Now start assembling the product. Connect the front and back parts together along the shoulder seams. Next, lift the loops on the knitting needles along the neckline and knit 6 cm with an elastic band, forming an edge. Sew on the sleeves and sew them into the sweater. The last are the seams along the side lines of the product. Hide the ends of the threads on the seamy side. A fluffy warm sweater is ready!

The description provided is a guide to making a classic sweater pattern. If you need a larger product, increase the number of loops initially. To reduce the pattern, accordingly, reduce the number of loops in the typesetting row.

Experienced needlewomen can make a sweater not with the front satin stitch, but with any other desired pattern. On mohair products, patterns from bundles or braids look good. They also fall under the category of patterns suitable for womens and mens products.

Knitting mohair sweaters

The next master class will tell you how to make a women's sweater with knitting needles for sizes 42-44. This model is knitted with a double thread (yarn consumption - 100 g / 200 m), which contains 70% mohair and 30% acrylic. It is recommended to use knitting needles No. 4, 7, 9, as well as circular needles No. 9.

The product is made in two patterns - the front surface and How do we knit them? The diagrams for the execution of these figures, as well as the symbols are shown in the photo below. Let's look at the sequence of the parts of the sweater and their assembly into a whole product.

To tie the back, on the needles number 7, you need to dial 59 loops. Knit them with the front stitch, decreasing along the sides in each 10th row, 1 loop 3 times. As a result of this work, 53 stitches will remain on the needles. When the height of the part reaches 28 cm, add 1 loop from each edge 3 times in every 8th row. And again 59 loops will remain on the needles. At a height of 46 cm, begin to make armholes. To do this, close 3 loops on both sides of the product, and then in each 2nd row, 1 loop 3 times. As a result, 47 stitches remain on the needles. Close the middle 17 stitches to form the neckline at 18 centimeters from the beginning of the armholes. To round off, perform additional reductions along the inner edges of the neck 2 times, 2 times and 1 loop in every second row. When the height of the back part reaches 66 cm, bevel the shoulders. To do this, on each shelf, close 5 loops 2 times in every 2nd row. This concludes the knitting. The total height of the product will be approximately 68 cm.

So, we are gradually mastering the simple knitting of mohair sweaters with knitting needles. Next, we proceed to the design of the right shelf of the front part. On knitting needles number 7, cast on 4 loops and knit the front surface, while adding on the right side (where the fastener will be) in every second row 3 times 1 loop, 7 times 2 and 4 times 1 loop. At the same time, perform the fitting in the same way as you did on the backrest parts. When the shelf is 42 cm high, decrease to form the neckline. To do this, reduce in every 4th row after the edging 9 times by 1 loop. At a detail height of 46 cm, close 3 loops to decorate the armholes, and then in every second row - 3 times 1 loop each. When the total height of the part reaches 66 cm, make a shoulder bevel similar to the back part and finish knitting. Perform the left shelf symmetrically to the right.

We continue knitting from mohair with the design of the sleeves. Now take tool number 9 and cast on 39 stitches. Knit the fabric, alternating patterns "English elastic" (11 cm) and "stitch" with needles number 4 (3 cm). When the part reaches a height of 59 cm, stop changing patterns and tie the product only with an English elastic band. At the same time, make a decrease along the edges to form a sleeve ridge in every second row 1 time 2 loops, 7 times - 1, and 1 time - 2 loops. Close the remaining 11 stitches on the needles. The total height of the part will be approximately 70 cm. Tie the second sleeve in the same way as the first.

The next stage is the assembly of the details of the jacket into a single product. Sew the sleeves and sew them in the desired places. Next, connect the parts of the back and shelves together along the lines of the shoulders and sides. Now start knitting a wide border. To do this, lift 252 loops on circular knitting needles No. 9 along the entire edge of the jacket and knit a strip 18 cm wide with an English elastic band. Next, close the loops, cut the thread.

Variants of other products according to the same description

An elegant, warm, soft and very stylish jacket will result from such a fascinating type of needlework as knitting. A mohair cardigan, coat, sleeveless jacket - these are the things that you can accomplish while focusing on the above master class. Increase the height of the shelves and backrests to the size you want, and the product will be longer. These will already be blanks for an elegant cardigan or an original coat. It will be even easier with a sleeveless jacket. Instead of sleeves, neatly tie the armholes with several rows of English elastic and close the loops.

Rules for the care of things knitted from mohair yarn

Knitting from thin mohair with knitting needles is quite laborious, but very exciting. In order for the products made with your gold pens to serve for a long time, it is important to take proper care of them. Wash them by hand in warm water (30-35 degrees) with the addition of a cleaner for woolen clothes. You can use regular shampoo instead. Do not machine wash the mohair, much less use the "Spin" function. After soap processing, rinse the product thoroughly in several waters and squeeze lightly with your hands. Next, lay it out on a horizontal surface, straightening all the details. Place a sheet, folded several times, or a fluffy towel under the product. They will absorb moisture. Dry your mohair garment in a warm place. Avoid direct sunlight. Flip clothing to the other side from time to time. If the garment is wrinkled, wrap it (wet) on a rolling pin or towel, and roll it gently on the table. Then spread out again thoroughly and leave to dry completely.

Conclusion

Do we knit with knitting needles? The diagrams, descriptions, recommendations given in this article will help all needlewomen to master the technology of making products from fine mohair yarn. We wish you successful mastering of new knowledge and skills in this craft, beautiful and original works and light loops!


Fashion Detail: wide boat neckline, the depth of which can be changed.
The size 42 (46). The differing data for the larger size are indicated in brackets (the pattern is given in Fig. 2)
Material: 300 (350) g
Patterns:
- front surface
- openwork according to the scheme
- elastic band 3x3
Back. Cast on 74 (84) loops on the needles and knit an even fabric with the front stitch. After 27 cm from the bottom edge of the part, go to the openwork pattern and knit another 6 cm.Then, for the side bevels of the armholes, reduce along the edges of the canvas 1 p. In each row 4 times through a row - 10 times. When the height of the knitted fabric reaches 43 cm, leave the loops of the last row (there are 46 of them on the knitting needle) and reshoot on pins, break the thread.
Front tie like a back.
Sleeves. Cast on 54 stitches on the knitting needles and knit with the front stitch 40 cm.Then go to the openwork pattern and knit another 6 cm, then proceed to the design of the bevels. Perform them as on the back. Leave the stitches of the last row (26) open and re-pin. Tie the second sleeve in the same way.
Assembly. Join the back and front with sleeves along the raglan lines. Then complete the side seams and sleeve seams. Remove the open loops along the neckline from pins to knitting needles and knit a 10 cm high bar with an elastic band in a circle. Close the loops of the last row in a straight line, without tightening. Bend the bar to the wrong side and carefully sew on the base. The neckline will look "branded" if you arrange it like this: fold the placket over the front side of the sweater, stitch open loops along the base of the placket. You can insert a very thin, color-coded hat elastic inside the strip.
Suzanne



The above calculation of the loops, thanks to the free silhouette of the pullover, is suitable for three sizes.
You will need: yarn (75% mohair, 25% polyamide, 80 m / 25g) - 425 g yellow-pink; knitting needles number 4.5; short circular needles number 4.
Elastic: alternately 2 facial, 2 purl.
Front surface: front rows - front loops, purl rows - yenan loops.
Knitting density: 18 px 25 p. - 10 x 10 cm.
Back: dial 146 sts and knit 3 cm with an elastic band, continue working with the front satin stitch. For narrowing, in the 7th p. knit the front surface of the 29th and 30th stitches together, knit the front, 117th and 118th stitches together with a tilt to the left (= 1 st. loop), mark the resulting loops. These decreases (the marked loop and the previous, respectively marked loop and the next one knit together) repeat 22 times in each next 6th row = 100 p.After 60 cm from the bottom edge of the part, close on both sides for armholes 1 time 3 p., 2 times 2 p. and 3 times 1 p. in each 2nd p. = 80 p. Knit straight. After 78 cm from the bottom edge of the part, close the middle 26 points for the neckline and finish both sides separately. To round off the cutout, close at every 2nd p. 1 time 3 p. And 1 time 2 p. Then close the remaining 22 p. Of the shoulder.
Front: knit like a back, but only after 58 cm from the bottom edge of the part for the V-neck, divide the work in the middle and finish both sides separately. To bevel the cutout, subtract alternately in every 2nd p. and the next 4th p. 18 times 1 st. After 80 cm from the bottom edge of the part, close the remaining 22 sts of the shoulder.
Sleeves: dial 38 sts and knit faces. satin stitch. For bevels, add 1 pt on both sides 18 times in each 4th p. = 74 p. At a height of 32 cm, close on both sides for an okat 1 time 3 p., 1 time 2 p. And 3 times 1 p. In each 2nd p., 5 times 1 p. In each 4- m., 1 time 1 p., 1 time 2 p., 1 time Z p., 1 time 4 p. and 1 time 5 p. in each 2nd p. Then close the remaining 18 points. For the shuttlecock, dial 38 points along the bottom edge of the sleeve and knit with an elastic band (start and finish with an edge loop). At a height of 2 cm in each purl, add 1 p. (= 47 p.), At a height of 3 cm in each front track, add 1 p. (= 56 p.), At a height of 4 cm in each purl, add 1 p. (= 65 p.), at a height of 5 cm in each front track, add 1 p. (= 74 p.). Knit in a new rhythm - alternately 4 persons, 4 out. Tying a shuttlecock 10 cm wide, close the loops.
Assembly: perform seams. Sew on the sleeves, slightly seated. For the collar, dial 119 sts along the edge of the neckline and knit 2 p. On circular knitting needles. facial and 1 p. out. loops, while in the 1st and 2nd p. in the middle of the front, knit 3 sts together, as well as in the 3rd p. close the middle loop of the front = 114 p. Tie 2 more p. front satin stitch and 14 cm elastic, then close the loops.
Verena 1995-11

Saturday, December 15, 2007


You will need: 750 (800) g of beige Belisana yarn (70% royal mohair, 15% wool, 15% polyamide, 115 m / 50 g); knitting needles # 3, # 7 and # 9; long circular needles No. 9.
Front surface: persons. R. - persons. n., out. R. - out. NS.
Patent pattern, persons. and out. R.(odd number of loops).
1 row (out. P.): Chrome., 1 person., * 1 p. Remove with a crochet as out., 1 person., Repeat from *, chrome. 2 row: chrome, 1 p. Remove with a crochet as out., * Knit a loop with a crochet together., 1 p. Remove with a crochet as out., Repeat from *, chrome.
3 row: chrome, knit a loop with a crochet together. Repeat 2nd and 3rd p.
Patent pattern, circular p.(even number of loops).
1 circular row: * 1 p. Remove with a crochet as out., 1 out., Repeat from *.
2 circular row: * knit a loop with a crochet together., Remove 1 p. With a crochet as out, repeat from *.
3 circular row: * 1 p. Remove with a crochet as out., Knit a loop with a crochet together with out., Repeat from *. Repeat 2nd and 3rd p.
Density of knitting. Persons. smooth surface, needles number 7: 11-12 p. and 15 p. = 10x10 cm; patent pattern, needles No. 9: 9 p. and 18 p. = 10x10 cm.

Attention! Knit jacket with thread in 2 additions.
Back: on needles No. 7, dial 59 (67) sts and knit 1 out. R. purl, then knit faces. satin stitch, closing to fit on both sides in every 10th p. 3x1 p.; for this at the beginning of the row after the chrome. remove 1 p. as persons., 1 persons. and stretch it through the removed loop; knit a row to the last 3 sts, knit 2 sts together, chrome. = 53 (61) p.
At a height of 28 cm from the typesetting edge, add 1x1 p. On both sides, then in each 8th p. 2x1 p. = 59 (67) p. At a height of 46 (44) cm, close on both sides for armholes 1x3 p., Then in each 2nd p. 3x1 sts = 47 (55) sts. At a height of 62 cm from the typesetting edge for the neckline, close the middle 23 sts directly and on both sides of them after 2 r. another 1x2 p. Simultaneously, at a height of 64 cm, close on both sides for shoulder bevels in each 2nd p. 2x5 sts (2x7 sts). Close all loops at a total height of 66 cm.
Left shelf: on needles No. 7, dial 4 (8) sts and knit 1 out. R. purl, then knit faces. satin stitch, while for the front rounding from the left edge in each 2nd p. dial again 1x3, 7x2 and 4x1 p. Simultaneously close from the right edge to fit in every 10th p. 3x1 p. = 22 (26) p. At a height of 28 cm from the typesetting edge, make a side bevel and at a height of 46 (44) cm tie the armhole, as for the back, and at the same time, at a height of 42 cm, reduce the neckline for the bevel of the neckline 1x1 p., then in every 4th p. 8x1 sts. To do this, knit a row to the last 3 sts, knit 2 sts together. and chrome. At a height of 64 cm, tie the shoulder bevels, as for the back.
Right shelf: knit in mirror image. To reduce the bevel of the neckline after the chrome. remove 1 p. as persons. 1 persons. and stretch it through the removed p.
Sleeves: on needles No. 9, dial 39 (43) p. and * knit with a patent pattern 11 cm = 20 p. then knitting needles number 3 2 cm faces. satin stitch = 6 p., from * repeat 3 times, finish the work with needles No. 9 with a patent pattern. Face stripes. Smoothing always start knitting from the seamy row and finish with the front row. At a height of 59 cm, close 1x3 sleeves on both sides for an okat, then in each 2nd p. - 1x2, 7x1 and 1x2 sts. After 70 cm from the typesetting edge, close the remaining 11 (15) sts straight.
Assembly: straighten the parts, slightly moisten and let them dry. Sew all seams, sew on sleeves. For the strap, cast on circular knitting needles 252 (266) sts: along the lower edge of the back - 42 (48) sts, along the roundings - 25 (29) sts each, along the straight front sides - 26 sts each, along the bevels of the neckline shelves - 42 sts each and along the neckline of the back - 24 sts. Knit with a patent pattern in circular rows of 18 cm, then close all loops freely.
Attention! The bar can also be knitted from 2 parts of the faces. and out. R. To do this, start dialing loops from the bottom of the middle of the back and end in the middle of the neckline of the back (127 (135) sts for each plank). Sew the sides of the strips; perform the seam at the bottom of the back from the inside out, along the neck of the back - from the faces. sides.

A warm fluffy sweater should be in every woman's wardrobe. Cozy mohair sweaters go perfectly with skirts, trousers and jeans. There are many models of women's knitted pullover. Patterns for this are selected very different, both embossed and openwork. Since mohair is a rather fluffy yarn, it is better not to mess with complex patterns.

Firstly, you can easily make mistakes in the knitting process - after all, due to the available fluff, beginners may not see the loops.

Secondly, the pattern may turn out to be so "tricky" that you will waste your time - in the end, the openwork embodiment will simply not be seen.

A little about yarn

Mohair is considered the thinnest and warmest yarn, most suitable for women's sweaters and blouses. This yarn is made from wool of angora goats. Special equipment makes fine and high-quality yarn very easy to use. Things made from this material are very warm, soft and beautiful. Even an inexperienced needlewoman can knit a mohair sweater - the models are easy to work with and do not require special skill. For a start, it is better to use simple patterns and more simplified models - without tying the sleeves, fitting and other additions.

Simple mohair sweater




To knit a women's sweater, you need mohair yarn - you can use it with the addition of wool or polyamide. Knitting needles # 5 are recommended for mohair yarn. Knit a sweater with a stocking knit, since the needles are thick and the yarn is thin, you get a sparse, almost openwork knit.

To get a product of size 48 (taken as an example), you need to dial 80 loops for work. If you plan to get a sweater of a larger or smaller size, then the loops should be added or subtracted, respectively. Knitting starts from the bottom of the garment. Work should be done according to this description:

  1. Cast on 80 loops for the front and make an elastic 6 cm wide with a 1x1 pattern, that is, alternate purl and front loops. Then continue to work with hosiery: alternate the front and back rows. They knit the back to a height of about 57 cm - this is the length from the bottom of the product to the neck - the sleeve will be deflated, so you will not need to knit the armhole line.
  2. Make a notch for the neckline. To do this, close the center 8 loops and continue to knit the left and right sides separately. For rounding, make a decrease in the knit from the side of the neck. To do this, from the front side through a row, decrease two loops at the same time (close them or tie them together). This is done three times, and the remaining loops are closed. The height of the front shelf should be about 64-65 cm.
  3. The back of the product is knitted in the same way as before. Only the rounding is done in a slightly modified way - first, the central 12 loops are closed, and then three more times, one loop on both sides of the neck.
  4. Sleeves. Cast on 32 loops and make an elastic band 5 cm. In the last row, increase the loops by adding them from the broach between the loops - in total, increase by 24 pieces. Then knit with knit stitch, remembering to add loops on both sides of the sleeve to create a bevel. This is required 13 times in every fourth row. Then you need to add 4 times, one loop after each row. The length of the sleeve is approximately 47 cm. Tie the second sleeve in the same way.
  5. When all the parts are ready, they should be sewn together. You need to start by stitching the back and front. Then sew the sleeves and sew them into the finished sweater.
  6. Tie the neck, or crochet, or knitting needles. Cast on the circular knitting needles loops around the neck and knit 4 rows with an elastic band, then close them.

The finished product from mohair does not require steaming with an iron, otherwise you can harm the villi, and it will not "fluff" well. To even out the garments, they can be soaked in cold water and spread out on a dry towel. Let the parts dry and sew them back together.

Openwork sweater



Women's fluffy sweaters can be openwork. Such work can be performed by craftswomen with extensive experience in knitting without problems and long calculations. An openwork sweater made of thin mohair will be very light and delicate, but it will not lose its ability to retain heat. To get a product of size 44, you will need 250 g of yarn and thin needles No. 2.5. For work, only two patterns are used - for the elastic and the main pattern. Elastic band - it will be at the bottom of the sweater, on the sleeves and neckline. The pattern is performed by alternating 2 front loops and one purl.

An openwork pattern is the main pattern that the entire product is knitted with. It consists of a rapport of 7 loops. Knits in the following sequence:

  • 1 row: make a double broach - remove 2 loops and stretch one of them through both, front, yarn, front, yarn, front, simple broach - remove one loop and pull the next loop through it.
  • Knit all odd rows with purl loops.
  • 3 row: double broach, yarn, knit 3, yarn, simple broach.
  • 5 row: front, yarn, simple broach, front, double broach, yarn, front.
  • 7 row: knit 2, yarn over, knit 2 loops together, yarn over, knit 2.
  • Start rapport from row 9 over again.

Sweater knitting technology is presented as follows:

  1. Back. Cast on 140 stitches and tie 2 cm with elastic. Then knit with an openwork pattern to the armholes for the sleeves. Make it by decreasing the loops 2 loops 2 times and once remove one loop. Then you should also knit 18 cm and close all the loops. If there is no experience or the pattern seems too complicated, you can not do the characteristic knitting of the armholes.
  2. Front. Tie the canvas in the same way, making the armholes. There should be 130 stitches left. To knit the neckline, close the central 28 loops, and then make roundings on both sides of the neckline by decreasing 3 loops at a time, simultaneously through a row and 5 times by 2 loops. Tie in front to the length of the back and finish with the closure of the loops.
  3. Sleeves. Cast on 60 loops, make an elastic band and knit with an openwork pattern, adding loops in every sixth front row. The sleeve should be made by decreasing the loops through a row 3 times, 2 loops each and 15 times one at a time. Tie to a height of 15 cm and close the remaining loops.
  4. Assembly. Pre-moisten the details and lay out on a towel or blanket. Dry and sew. First, the shoulders should be sewn, then the sleeves should be sewn on and all the side seams should be sewn. Cast on circular knitting needles around the neckline and tie with elastic. The sweater does not require subsequent steaming with an iron.

Knitting allows a woman to bring her ideas and fantasies to life. All her works will be in a single copy, which means that it will allow her to be fashionable and original in her outfit. Mohair products look great because they are warm, lightweight and very comfortable.






Mohair sweaters also benefit from their lightness. If you have noticed, even in the above descriptions, a rather small weight of the yarn necessary for the embodiment of fantasy is indicated - only 200-400 g. Moreover, despite their lightness, mohair pullovers are quite warm - they are not inferior to products made of real wool. Mohair is soft and, unlike the same wool, does not prick at all, so the products are perfect for people with sensitive skin.