There are different bouquets, and they can consist of live plants, ordinary twigs and, of course, balloons. Regarding the latter, at the present time they are gaining more and more popularity. Judge for yourself: with their help, you can decorate your home in an original way for any celebration or give them as an alternative to a real bouquet, both for a child and an adult. Of course, you won’t appear with him at the wedding, but congratulating your soulmate on Valentine’s Day is quite real! And, of course, such bouquets are the key to a good mood! But at the same time, decorating them with something is quite difficult.

There are special companies that organize such celebrations, where we can order such flowers for any purpose. But you must admit that gifts made on their own, the heroes of the occasion will appreciate much more. Therefore, we decided to tell you how to make flowers from balloons with your own hands.

Where to start work?

Naturally, with planning. First, we need to decide which balls we will use. The thing is that today there are several technologies for making such bouquets at once. Let's consider them separately.

We make a bouquet of round balloons.

A fairly common manufacturing technique and at the same time one of the simplest. Thanks to her, even children can make flowers from balloons with their own hands. But first, let's look at what we need in the work:

1. Threads.
2. One light-colored ball (possibly white or yellow).
3. Six - seven balls of a different color, but always the same.

So, let's get to work.

Stage one.

First we need to inflate those balls that will serve us as petals. The best option would be six - seven balls - they will look very attractive. When inflating them, we must remember that the balls must be the same size. But first, you should inflate only two balls, which we will fasten together with tails or a thread.

Stage two.

Having finished with the first pair, we inflate the next two balls in the same way, also fastening them together. After that, you need to fold them diagonally with the previous pair and, again, tie with a thread. Thus, now we have in our hands a kind of blank, consisting of four petals.

Stage three.

We proceed to the third pair and traditionally do everything according to the old scheme.

Stage four.

Now we take on the yellow ball (recall, it is the core of the future flower): we gently inflate it too. But it should be remembered that its size should be somewhat smaller than in the previous case. Then insert it in the center between the petals. To do this, we simply pass it through one of the formed pairs and carefully fasten everything by tying the junction of the petals with a thread. If the future petal is intended to decorate the walls or, moreover, the ceiling, but it is on this ball that the ribbon should be fixed.

So, a homemade flower from round balloons is ready! Let's see what else can be done.

We make a bouquet of long balloons.

As you might have guessed, making a flower out of a long balloon is somewhat more difficult than in the first case. But even with such a task, everyone can cope. All we need is a couple of long balls. One of them should be green, because we will make a flower stem from it. Regarding the second ball, it can be, for example, a camomile. So let's get started.

Stage one.

Let's start with the stem. To do this, we need to inflate the green balloon so that there is still a small “tail” at the end of it. This will give the ball the necessary softness, so that in the process of work it simply does not burst.

Stage two.

Then we need to fold the ball in half, step back ten centimeters from the bend and twist it several times. Thus, we already have the first leaf of our flower. After that, we fold one of its halves in half, twist its parts and voila - we have a second leaf! As a result, a base for the flower itself, a fairly long stem and a couple of leaves should have formed on the stem.

Stage three.

Also we can make iris. To do this, we will need to inflate a blue or purple balloon, traditionally leaving a “tail” at the end that will not be filled with air. Next, we fold the ball in half, and then fasten its ends with a thread.

Stage four.

We have a knot that should be twisted several times in its center. Thus, we get a pair of identical circles.

Stage five.

Put these circles together. From one of the edges you need to retreat by about 1/3 and twist two of its halves there at the same time. So, we got iris.

Stage six.

Next, we need to connect the bud to the stem. To do this, you can use a thread, or you can attach it with the help of a “tail” from a green ball. Look, it's only been ten minutes, and we already have some pretty pretty do-it-yourself balloon flowers! And if you make at least five of these flowers, you can make an original bouquet. For him, we need a ribbon that can be made from a long ball, making a kind of bow out of it.

We fasten it to the bouquet with a thread or with the same ball with which we will tie our airy bouquet.

To make a flower, you will need two balls: green for the stem and light for the petals. Insert the ball between the joints of the petals so that the tulip-core is in the center of the flower.

Stem 1. Inflate the balloon, leaving 10 cm free at the end. Make a twist in the form of a tulip. This will be one leaf per stem. 3. Do the same for the second leaf. Then tie a knot. Squeeze the end of the balloon to make a 1.5 cm tail, and then tie the two ends together. Creative workshop “Inflators” Toys from the air, educational kits, educational literature and films. A full range of products and services for balloon modeling.

And this is no coincidence. Beauty, ease of creation and a small number of balls used made this figure a favorite both among those who create it and those who are connoisseurs of this wonderful toy. It is also quite common for adults to use balloon flowers as interior decorations, creating an unforgettable playful holiday atmosphere.

We showed how to make a flower with some addition. The core of the flower can be made a little differently. In front of us lies three balls-sausages of different colors. It is recommended to take one of the balls green - it will become the stem of the flower. The other two are the core and the petals. In this case, yellow and orange are used, respectively. We inflate the balloon, which will become the petals of the composition. So during modeling, there will be somewhere to move the air so that the “sausage” becomes less elastic and more pliable in twists.

We connect the end and the beginning of the ball to make a circle. Without putting the pump far, we inflate the trunk of the future flower. For the sake of the future core of the flower, you will have to sacrifice a whole ball. Further, the future middle of the flower will need to be connected with the trunk. We return to the main part. We twist the previously obtained circle from the sausage ball so that we get two twists.

Mentally divide the figure into three parts and twist one third of the figure as shown in the figure. At this stage, consider the options for creating the core of a flower. To obtain the desired result, it is necessary to press the index finger on the not yet cut end of the inflated balloon and only then cut off the excess.

The sequence of creating a flower from balloons

Due to the high pressure in a small figure, when pressing with a finger, it will not be possible to achieve the desired. So, by making a very small change in the technology of creating a flower from a ball, you can get a completely different appearance. In our opinion, the second option is much more presentable. We twist the trunk on the basis that the twisted one will be divided into two petals. Holding the stem and petal with one hand, with the other we twist in several turns.

Flower from balloons of sausages (SDM). Video and photo MK

Each ball can be made with petals of a different color. The combination of multi-colored petals makes such a bouquet truly festive. Such flowers will be an unusual gift for your loved ones or they can be used to decorate the room for the holiday.

I found books, stocked up on several packages of balloons, and set to work. The first surprise awaited me was that the pump from the kit refused to inflate the balloons. Mouth also did not work, although I did everything according to the instructions from the book. Perhaps I got balls of the wrong quality. And then the foot car pump came to the rescue. With him, things went quickly and fun - the process of inflating balloons turned into a game for children. I just had to make sure that the balls did not burst.

Bouquet of balloons

But before I move on to the description of the craft, I want to consider safety rules when working with balls and basic terms. Alcohol markers can corrode the ball and it will burst.

7. Joint - a small piece of a ball formed as a result of twisting. 8. Tulip - a special bubble at the beginning of an inflated balloon. 2. First we will make the flower petals. 3. Visually divide into three equal parts and make 2 twists. This is the most difficult stage - if the balloon is strongly inflated, it can burst, which happened to me for the first time. 5. In the resulting flower, correct (align) the petals.

Flowers are one of the symbols of spring. And in this article I will tell you how to make a bouquet of balloons. 1. First, inflate the blue balloon completely. Balloon flowers have always been welcome "guests" at children's parties and matinees. Bouquets of flowers from balloons look especially interesting. Then make two medium bubbles and twist them into a lock. And we got a little balloon dog, very similar to a little poodle!!!

Every hero of the occasion wants to make his event bright and memorable. To do this, you need to think through everything to the smallest detail. We must not forget about the decoration of the hall. Decor with inflatable balloons is used to decorate wedding halls, to complement matinees and children's parties, for anniversaries and other festive events. Of course, decorating professionals will do everything to the highest standard, but you will have to pay a tidy sum for this service. In order to avoid such waste, you can learn how to make flowers from balloons with your own hands. Such decoration looks unusual and original, and is made quite simply. However, many nuances must be taken into account.

Choice of working material

First you need to decide how many flowers there will be and what balloon flowers you need. Calculate everything correctly so that there is no situation of shortage of material. It's better to leave the extra balls.

Purchase the required amount of material and a hand pump. It is quite difficult to inflate such balloons by mouth. In most cases, an inflatable mechanism is already attached to a set of balls.

It is worth considering in detail several ways of how to make a flower from a sausage ball.

Stem making

For the trunk of the future flower, it is better to take a green or light green color. Inflate the balloon with a pump, leaving the end about ten centimeters.

Do-it-yourself flowers from balloons must be twisted with confident and quick movements, without fear that the inflatable material may burst.

Take the ball from the side of the knot and insert your finger into it about 5 centimeters. After that, hold the knot inside the material with your other hand and pull your finger out. Next, you need to do three twists so that the knot is clamped inside the balloon. As a result, you will get a recess, which will later become the core of the flower.

After that, you need to make the petals. Otherwise, without them, flowers from long balls will look dull and boring. Take another inflated "sausage" and fold in half. This will mark the middle of the material. After that, you need to connect alternately one and the second ends of the ball with the marked middle. It is necessary to perform this manipulation in three twists.

Also, stem petals can be made directly from the stem itself. In this case, the flower will turn out with a short stem. If you are making flowers for a bouquet, then it is better to leave the legs long, and not make petals on every stem.

Balloon flowers, master class: daisies

Perhaps the easiest way to make flower petals is precisely the method of using one "sausage".

Take the ball and connect its ends by tying them together. After that, by eye, divide the material folded in half into three parts and do a triple twist. Next, fold the resulting parts in a zigzag on top of each other and press firmly with your fingers.

In the places where the parts are twisted, make another twist so that you get six identical petals. Finally, put the resulting flower on a stem with a core.

How to make a flower from a sausage ball? rose scheme

This method is less common, but no less effective. In this case, the flower made is very similar to a rose. For it, you will need three balls: a pair for the bud and one for the whisk.

Take one inflatable "sausage", fold in half and fix the ends with twisting. After that, mark the middle and, folding it in half again, twist the resulting workpiece three times. As a result, you will get a bud of three petals.

Choose a ball of the right color. It is better if it is the same as the stem. Fold it in half and connect the ends by tying them together. After that, select the middle and make three identical petals, twisting the middle of the segments together. Screw the protruding ends of the bud to the middle of the corolla.

Take another sausage of the same color as the bud. Twist the material into a loose knot and tie the ends together.

Before you make a flower from a sausage ball, inflate all the necessary material. Otherwise, you will spend more time and effort on simultaneously twisting and inflating the material.

Make twisting movements in only one direction (away from you or towards you), otherwise you may get confused and have to redo all the work.

Don't overtighten the knots, otherwise the ball may simply burst.

All movements must be sharp and confident. When dividing the ball into parts, try to do it as symmetrically as possible, otherwise the resulting petals will be of different sizes.

Flowers collected in a bouquet look more spectacular. To create it, you need to make several flowers and connect them with one "sausage", twisting it around the stems.

Conclusion

Now you know how to make a sausage ball flower. Try both options and choose the one you like best. Share the secrets of your skill with friends and family, they will surely like your ideas.

Good luck in your work!