Origami butterfly is the simplest pattern for children. Step by step instructions on how to make an origami paper butterfly. How to make a three-dimensional origami butterfly: step by step instructions

Paper butterflies will be an ideal motif for decorating homemade cards, bouquets of flowers or the interior of an apartment. We offer you some simple lessons on how to make unusual butterflies using the origami technique, from the pages of a magazine or colored napkins. We hope that these bright figures will be the harbingers of a warm and sunny spring!

To make an origami butterfly, you will need a square sheet of paper measuring 8.5 × 8.5 cm.

1: If you are using double-sided paper, place it in front of you with the color side up. Fold the sheet in half, first along and then across. Unbend.

2: Now fold the sheet diagonally - connecting first the top right and bottom left, and then the top left and bottom right corners. Unbend.

3: Fold the paper in such a way that you get a triangle, as shown in the figure. To do this, fold the right and left edges of the sheet inward.

4: On the dotted lines marked in the figure, bend the corners of the part.

5: Flip the shape.

6: Now fold over the top of the triangle so that the tip protrudes slightly from the top edge of the piece.

7: Wrap the tip. Do not iron the folds, otherwise the figure will be too flat.

8: Fold the figurine in half across.

And here is our collection of paper butterflies:

Lesson #2

This is a very easy way to make paper butterflies! You will need:

  • magazines with bright pictures or drawings;
  • scissors;
  • glue;
  • elastic.

Fold a sheet of paper twice, and then cut out a triangle of the desired size from it. Now unfold the paper - you should get a rhombus.

Starting from the middle, fold the figure into an accordion. Glue the folds together, dropping a little glue into the middle of each.

Now slightly bend the part in the middle and spread the wings. Make one more of the same detail, only this time a little larger. Glue both parts together.

By hanging a few butterflies on an elastic band, you can make a mobile for babies. Butterflies can also be mounted on a window or on a wall, thus decorating any room. And if you make the figures very small, then you can decorate homemade greeting cards with them.

Master class number 3

You will need:

  • black paper;
  • translucent multi-colored paper (you can use colored napkins);
  • crayon;
  • scissors;
  • stationery knife;
  • glue stick.

2: With white chalk, draw a pattern on the wings, and make appropriate holes with a clerical knife or scissors.

3: Cut translucent paper into thin strips.

4: Lubricate the butterfly wings with glue and glue the colored stripes. Experiment by combining different colors with each other. You can also overlap the strips to create an unusual effect.

5: Now turn the butterfly over and cut the strips along the edge of the wings so that they do not protrude.

6: Now the butterfly can be glued to the window or greeting card. And if you want to hang the figurines on a chandelier or attach them to a bouquet of flowers, cut out another butterfly from black paper and glue it on the back so that the strips of colored paper can only be seen through the slits in the wings.

You can adapt this lesson for yourself, but we got this butterfly:

Master class Craft product Origami The simplest origami butterfly MK Paper

they asked me in this work how they made the butterfly ... http://stranamasterov.ru/node/396350 I searched, I didn’t find it in the SM to give a link ..maybe I was looking in the wrong way .... I myself learned how to make it at the dawn of the origami hobby, 10 years ago, in some children's book ... and because the butterfly is folded to the impossible simply, then having made it once, you will never forget how to make it))

fold the basic shape of the "double triangle"

fold the top two corners to the center

we turn the workpiece over, turn it 180 degrees, so that its central corner looks at us, and raise this corner ... but not to the edge of the paper, but a little higher, so that the tip of the central corner protrudes 3-4 mm above the edge ... here is the figure becomes slightly voluminous, so it is not necessary to press it tightly to the surface, only the tip of the corner ...

this is how it should turn out ... we wrap the main corner over the top line and bend it from the back side ... turn it over ...

because the wrapped corner turns out to be very small, then you can fix it with a drop of PVA ... now we take and bend the butterfly vertically, holding it by the “torso” ....

when bending, you can tweak the upper wings to make the butterfly more voluminous ....

Here she is on her side...

I twist the wings with a skewer ... and that's it))) ready))

describing the process is much longer than doing it)) in fact, the “birth” of such a butterfly takes a couple of minutes ... and the children will be happy to do such a miracle)) I hope that the MK will come in handy for you)

all creative success)))

Butterfly is a symbol of lightness, grace, grace. It can decorate anything: a flower arrangement, a work computer, a wall, a Christmas tree, and anything in general. Making a paper butterfly is very simple, even a child can handle the craft. The main thing is to choose paper of bright colors - then the moth will turn out to be festive and cheerful.

This craft requires two-color paper, but we just used two sheets of different colors. In order for the butterfly not to turn out to be gigantic, we use 1/8 of an A4 sheet, for this we divide our paper into 8 parts and cut it into blanks.

Each sheet must be folded separately, otherwise the fold lines will turn out to be sloppy.

Fold the sheet in half across

Then along

We divided the sheet into 4 parts

Now it remains to outline 2 more fold lines, bending the edges of the sheet to the middle.

Now our A4 is divided into 8 parts. The same must be done with the second.

Cut along the lines of the workpiece and begin to fold the butterfly. At first, each sheet is folded separately so that the lines are neat.

Half across

Then in half along

We combine our 2 sheets and fold along the marked lines four times.

Bend the corner to the center fold line

We fold along the marked line, as in the photo.

Turn the piece over and fold it on the opposite side in the same way.

We outline the fold lines

Fold in triangles.

Now we bend the wings to the center line

Turn over and bend the triangle-stand.

Our wonderful moth is ready to land wherever you want!

It's really very simple, isn't it?

If you want to make a simple origami butterfly, then our craft is just for you. This is a very easy craft to do. With such colorful origami butterflies, you can decorate a greeting card, a stand in a kindergarten or school, or just a wall in a children's room. To complete the craft, you do not need to understand complex patterns or learn the basics of origami.

Tools for making origami butterflies:

  • colored paper,
  • scissors,
  • safety pins.

How to make colorful origami butterflies

If you want to make a lot of origami butterflies at once, then prepare colored paper in different shades. Cut paper into squares. A flock of butterflies of different sizes looks good. If you are doing this craft with children in the garden, then cut the squares in advance.

Fold the square diagonally. You have a big triangle.

Fold the workpiece again. Rotate the triangle so that the opening edges are at the top. Gently make a semicircular cutout in the resulting triangle with scissors - these are carved butterfly wings.

At the bottom of the figure, make an incision and bend the butterfly wings to the sides. Lightly spread the upper wings of the butterfly with your fingers. Here is the origami craft and ready. Really easy!

We offer another master class in the popular technique of paper folding. Today we will make an origami butterfly - and so that everyone can handle it and the readers do not have any ambiguities and questions, we bring to your attention step-by-step instructions and step-by-step illustrations.

This origami butterfly is not just a paper figure, but also a bookmark (we already did the same way). It can be put on the corner of a book page: comfortable and beautiful. Children of middle and senior school age can easily cope with the proposed work and decorate notebooks and textbooks with such butterflies. Why not? It is not necessary to wait for Valentine's Day to trade; any school day is good to exchange fancy butterflies!

To make one origami butterfly you will need:

a square sheet of paper (in our master class, note paper from a block with a square side of 8.7x8.7 cm was used);

pencil.

How to make an origami butterfly: step by step instructions

We have a square sheet of paper in front of us.

Fold the sheet in half so that the fold is horizontal.

We unfold the sheet to its original position.

Thus, the sheet was divided in half. We bend the lower half in half, turning the lower edge of the sheet to the existing fold.

We unfold our sheet again, and cut off a narrow strip bounded by the fold just made.

This is what our sheet looks like at this stage. Note that the existing fold is now vertical.

The sheet in the position in which it was, with a vertical fold, is folded in half (top to bottom).

Now you need to do one more addition (from right to left).

Unfold the fold just made and fold the upper right corner towards the center vertical line.

Do the same with the top left corner.

Turned corners in the form of triangles must be removed inside.

We iron all the folds well with the reverse (smooth, non-pointed) part of the pencil and “flip through” one of the parts so that we get a blank of the following type.

Again, carefully iron all the folds with a pencil.

We bend the right side of the future bookmark vertically towards the center line of the workpiece.

We do the same with the left side. We bend the folds just made to the previous position.

We turn the workpiece 180 degrees.

Along the edges of the center line there are rectangles outlined by previously made folds. Their inner edge is required to be bent in the form of triangles. We do this on the right and left sides.



We fill the resulting triangular folds inward.

We bend the top layer of the right side down, aligning the edge with the vertical center line.

We do the same with the left side of the workpiece. Our origami paper bookmark in the shape of a butterfly is ready.

This is what it looks like from the back, where there is a corner-pocket for the page.

It remains only to use the bookmark for its intended purpose.

marycopy (Marina), text edited by Eva Casio specially for the site

Creating beautiful, original and miniature origami butterflies with your own hands, using paper, it is quite possible to brightly and unusually decorate the interior, making it attractive and unique. Photos of origami butterflies can be found on the Internet, actually having an idea of ​​\u200b\u200bwhat should happen in the end.

Step-by-step instructions for origami butterflies will allow you not to miss a single detail, creating a stunning decoration with your own hands. Such decor is famous for the fact that it allows you to incomparably, originally ennoble one or another room, for example, a bedroom, a living room, or a nursery.

It is important to add that paper butterflies can also act as a good gift, while replacing a banal, traditional bow.


Create a miniature paper origami butterfly. What do you need to know?

First of all, you will need to prepare the necessary materials, tools. For example, this includes scissors, a ruler, you will also need colored paper of the shade that you wish, a pencil with an eraser. As you can see, all the necessary tools are at hand.

Now you can cut out a square-shaped base from colored paper. The schemes for correct folding, which you will learn about, will help you to complete such stages of work without any problems, because you will need to fold the leaf into a triangle, which is done without any problems.

The resulting line must be carefully ironed, after which the workpiece can be laid out, straightening the fold line.

You can see detailed instructions on how to make a butterfly on the net by watching videos to understand how to perform this and other stages of work. The first fold line is mandatory, it must always be in the center of the structure.

At the moment when you need to fold the top corners up, remember that they must close. After these steps, the design is turned over and the fold line is marked, you can bend the corner.

At the moment when you actually begin to turn the butterfly over, you can see how ready-made wings appeared. This is the origami butterfly with a description for beginners, in order to understand the essence of the work, you can also watch videos that will clearly demonstrate the creation of such a composition.

By completing all the above steps, you can enjoy the fact that your butterfly is almost ready, it remains to perform only minor manipulations, after which you can enjoy the original butterfly, which will decorate the interior design of any room and a gift.

At this stage, it is necessary to carefully twist the tips of the butterfly's wings, try to perform such actions carefully so as not to spoil the composition as a whole.


It may surprise you, but the paper butterfly is ready. As you yourself could see, there is nothing complicated in its creation, which means that with a little effort, you can always make it without unnecessary problems and difficulties. A master class on how to make an origami butterfly will definitely help you realize such ideas.

One cannot but add that in reality the steps for creating a butterfly are simple, they are easy to remember, which means that a second butterfly, if desired, can be created without instructions at all. This will lead to the fact that you can create the number of crafts that will interest you, thereby beautifully, originally decorating your interior with them.

If you turn on your imagination, then you will find out that such butterflies look incomparable on the branches of a tree, which means that you can create an even more original and unique design.

As soon as you have prepared the branches, you should place them in the original decorative vase, after which you can attach your tiny and attractive butterflies to them. The resulting composition is really spectacular, which means that with its help it is always possible to decorate one or another corner of the house.

You can always experiment, for example, by painting plain butterfly wings with acrylic paints, naturally their appearance will be even brighter, richer and more attractive.

Observing all these rules, creating a butterfly is not difficult.

Photo of origami butterflies

In this simple step-by-step master class, we will talk about how to make an origami butterfly - it is known that the ability to fold such cute origami butterflies will definitely come in handy for those who like to create handmade postcards, because such decorative elements can often be found in various master classes making handmade postcards.

Tools and materials Time: 10 minutes Difficulty: 3/10

  • multi-colored paper squares with a side of 8.5 cm;
  • a hard object for smoothing out the folds.

Graceful weightless origami butterfly is easy to make. We invite you to figure out with us how to make an origami butterfly - once having mastered this technique, your hands will never forget it. And you will be able to surprise and delight your interlocutor by folding this wonderful creature from a sheet of paper or an ordinary table napkin in a couple of minutes.

Step by step instructions with photo

Origami butterfly, the scheme of which is presented in our master class, is suitable even for beginners, and step-by-step instructions with a photo will help you deal with creative work even faster.

Step 1: Draw the Diagonals

We bend the blank for the future butterfly in half horizontally, and then diagonally (photo 1). We bend diagonally (photo 2).

Step 2: Form a Triangle

We bend the edges of the horizontal fold to the bottom of the vertical fold (photo 3). You should get a double triangle, as in photo 4.

Leave the lower triangle alone. We work with the upper triangle: we bend the edges at the base of the triangle to its top (photo 4 and 5).

Step 3: form the body

We turn the workpiece on the reverse side, the top of the triangle looks down.

We bend the part so that the top of the triangle extends 2 mm beyond the base (photo 6).

Step 4: make the wings

We bend the protruding piece and glue it to the back side (photo 7). Fold the workpiece in half (photo 8). We do not smooth the fold, since the butterfly will turn out flat.

Step 5: shape the product

We turn the butterfly with a small triangle up, bend the wings, while trying to give them a realistic shape.

Origami is a fairly common form of creativity. Oriental arts are very firmly entrenched throughout the world and continue to grow in popularity. Many types of Asian arts, among which and, have become extremely popular due to their unusualness and uniqueness. For a long time, Eastern culture, for various reasons, was unknown to people from other countries, and when all this suddenly became available, many people were simply shocked.

Origami, as one of the art forms, has become very popular. It should be understood that origami is amateur and professional art. Amateur origami are the most popular forms that anyone can create. It can be butterflies, birds, boats, planes, simple scheme animals or objects. A completely different thing is the artistic approach to origami. Masters of this genre create such extraordinary paper products without the use of glue, paper clips, threads, and so on, that it is absolutely impossible to imagine that such works were created by simply folding a paper sheet.

If you want to master the art of origami, then you should start from the very basics, from the simplest forms. For example, here is a step-by-step instruction with a photo for creating an Origami Butterfly. This simple technique should be known to all beginners. Just a few minutes, and you can make a butterfly from an ordinary sheet of paper. Try it and if you like it, then who knows, maybe you will become a new artist in this style and surprise the world with your incredible inventions!?

Do you want to get a good specialty that will give you a happy future? An excellent choice would be for you training in the specialty pgs. Industrial and civil construction from professional teachers.