Socks on two knitting needles: a knitting scheme with a description, master class of warm socks without a seam with a photo and video. Socks Schemes with description
Original slippers with knitting needles. Description to dial on the knit 51 loops with dark thread, to peel 8 rows of sweating knitting. Then split all the loops into three parts: 17 + 17 + 17, and knit only the middle part of the cycle knitting. Side loops temporarily remove on large pins. Touching 10-12 cm, we will have a rectangle. Loops do not close. On the sides of the rectangle, we recruit additional loops (approximately 23-25) thread of light color. We encourage the "cloves" along three sides of the rectangle: 4 rows knitting a bug, 5 row - the edge loop to remove, * 2 loops together face, nakid * - to the end of the row. We still have 3 rows of a cycle knitting. We add knitting by the same row, where we have Caides and connect the initial row with the last way of touching: 1 loop from the first row and one loop from the last row to penetrate the facial. Then plie into the operation of the loop with a pin and knit tight viscous height of a slipper 3-4 cm dark thread. Go to knitting soles. This is noted by average 12 loops and knit them shortened rows until you close all the side loops. To unscrew the heels along the edges, pick up the height of a slipper from two sides to 16-18 loops. Knit short-range rows 12 loops as a heel in the sock. Top slippers tied up with "cloths". We like a needle. Finished slippers can be decorated at will. We begin to knit the teeth from above (first color), we recruit 50 loops and knit 5 rows with a cycle knitting, 6 row-1 edge. * Nakid, 2 VM. LIC. *, 1 chrome. Then, again, there are 5 rows of a bug, after launching the teeth with a spin, then 3 with a handful viscous second color after divide the loop into three parts and knit only the middle part transition to the first color and recruit edge loops of the middle part to confuse the teeth. Teeth knit from above: 4 rows of stocking elm.; 5 row-1krom., * Nakid, 2 VM. LIC., * 1 KROM., Then again 4 rows of stocking., Looking after launching the teeth with a spin, then the second color on all hinges of the shoe knit ridding mating 1.5-2 cm (fullness shoe). Again, knit the first color of the teeth - 4 rows of a cycle knitting, 5 row - 1 krom., * Nakid, 2 VM. LIC. *, 1 chrome, after again 4 rows of stocking. viscous. After the teeth of the spokes. Go to the sole that we knit the second color tissue when you start knit the sole. It is necessary to dwell in each second row the first two loops together .. that two together in front of the central loop .. I put the central loop and again two together and two minutes together to do with a dark thread on the knitting needles, to penetrate 8 rows of sweating. Then split all the loops into three parts: 17 + 17 + 17, and knit only the middle part. Side loops temporarily remove on large pins. The middle part can be decorated with any pattern. For example, "butterflies". Knitting butterfly pattern. For a butterfly pattern, the number of loops must share for five, plus two more loops. For the sample, we recruit 27 loops. The first row knit facial loops. The second and all even knit off the hinges. The third row knit as follows: We remove the first edge loop, pull the thread to yourself and remove five loops. Thread should lie across the removed loops along the left knitting needles, then knit five facial loops and so knit until the end of the row. The last edge loop always knit facial. Similarly, knit the fifth, seventh and ninth rows. In the eleventh row knit the butterfly. We knit two facial loops, then enter the right back to the threads lying on the loops, from the bottom up, we capture the working thread, we drag it under the threads, the loove is put on the left knitting needles and squeeze it together with the next loop for the rear lobes. Then knit 9 facial loops. And so repeat to the end of the row. In 13 rows, knit 5 facial, tires to ourselves and remove 5 loops. 15, 17 and 19 rows knit as well as 13. In 21 rows, we knit 7 facial loops and make a butterfly, as in 11 rows, then to the end of a row knit 9 facial and again knit the butterfly. That is, we knit 21 row - 7 LV we make a butterfly, 9 lv. The fact that in front of the brackets knit once. What is concluded in the brackets knit to the end of the row. Knitting butterfly pattern. Butterflies are located in a checker order. Pattern Rapport: KP: 5 +2; 1 - LV; 2 and all even - Izv; 3 - NOKS, 5C, 5LV; 5, 7 and 9 - like s; 11 - 2LV, make a butterfly, 9 lv; 13 - 5lV, NOKS, 5C; 15, 17 and 19 - as 13; 21 - 7 LV, make a butterfly, 9LV / 23 - as 1. Tied 10-12 cm, we will have a rectangle. Loops do not close. On the sides of the rectangle, we recruit additional loops (approximately 23-25) thread of light color. We encourage the "cloves" along three sides of the rectangle: 4 rows knitting a bug, 5 row - the edge loop to remove, * 2 loops together face, nakid * - to the end of the row. We still have 3 rows of a cycle knitting. We add knitting by the same row, where we have Caides and connect the initial row with the last way of touching: 1 loop from the first row and one loop from the last row to penetrate the facial. Then plie into the operation of the loop with a pin and knit tight viscous height of a slipper 3-4 cm dark thread. Go to knitting soles. To do this, we note the average 12 loops and knit them shortened rows until you close all the side loops. To unscrew the heels along the edges, pick up the height of a slipper from two sides to 16-18 loops. Knit short-range rows 12 loops as a heel in the sock. Top slippers tied up with "cloths". We like needle
The way of knitting socks on four spokes refers to the classic option. With this method, the product is obtained without any seams. But there is still inconvenience. First, all the time you need to ensure that the loops do not fall out of the spokes, secondly, it is quite difficult to use patterns.
In this respect, knitting on two spokes allows you to conveniently create a pattern, since the canvas is not circular. Minus, however, is that the product will have to sew, but knitted seams allow you to do it very carefully. And you can choose any of the options.
Knitting technique
The elastic of the socks is better to knit smaller numbers, then it turns out the tight and will not be very stretched.
Knitting ankle sock with two spokes
Knit a gum 2x2 width equal to girth of ankle, knit rows of facial loops before the start of the heel,
insert one half of the web with a height heel altitude. The second half can be removed on the spare knitting needle or thread.
Rounding of the heel of sock
The loops of the rolled half divide on three, the extreme parts should be the same. In the sample given, each part is equal to five loops. Knit 5 loops of the right side, then 4 loops of the middle, and the fifth they pronounce along with the first loop of the left side (a), in the reverse row, we remove the first loop (b), we insert three loops of the middle part with the outbreak, and the next knit with the next loop (in ), We repeat knit until you take all the loops of the extreme parts.
Knitting socks on two spokes
We collect all the loops for getting a circular web: you collect 5 loops to loops on the knitting knitting, which are taken from rounding the left side, then connect the hinges from the extra needle, and then score 5 loops that lost in the right part, knit the foot of the desired length to start the sock.
For startup, we divide all the loops into several parts (in the example above it is 4), and at the end of each part we make a demolition, taking two loops together.
Stitching sock
Cross-mounted sock parts fold the front side out
we enter a needle with a thread under the loop to the right of the edge,
then we also introduce a needle under the loop on the left side of the linen crosslinkable, go back to the right side, etc., we are tightened to the thread. All edge loops must be from the wrong side of the product.
The sock associated with two spokes is ready.
- When knitting a second toochka, do not forget to take into account the symmetry of the canvas, which knit.
- When using the pattern, choose this technique so that there is no broken side from the wrong side, or they would be very short, since otherwise the leg to wear will be cling to these stretch. The optimal option will be using.
Spring has come, but winter is still feeling. The weather is not in a hurry to please the sunny warm days, and socks that will warm you are very relevant. Your attention will be offered a simple option. knitting socks On two knitting, for those who are uncomfortable, do not like or simply have not mastered the knitting of five.
For such socks, we took a lovely Pekhorka Nursery, a novelty of bright green colors ("exotic") and beige. It is 100% acrylic, designed yarn for nursery and, therefore, it does not ignore, has a large amount of thread, with a weight of 50 g / 200 m well lies in the canvas. Twisters taken two, from the kit for knitting socks in 5 pieces No. 2.5.
Socks We will knit 39 sizes, foot length 25 cm.
Let's start with the calculations, first we will connect a sample of 20 loops with a bustle stroke - this is when facial loops stick on the front side, and on the wrong one.
The length of the sample is 7.5 cm. For a 39 size of the size, a circle is needed at least 22 cm, which means 7.5 * 3 \u003d 22.5 suitable. For a complete circle, it is necessary to 20 * 3 \u003d 60 loops, but we only take half.
1 row. We recruit on two spokes of 30 loops.
2 row. To begin with, we will connect the gum, 1 * 1, that is, 1 loop facial (individuals. P.) Other inequate (occasion. P.). It should be remembered that when we knit on two knitting, the first loop always remove without told, it gives a smooth side edge of the product.
3 - 8 rows. 30 loops of rubber band.
9 - 10 rows. 30 p. Elastic, but replaced green on beige thread.
11 - 12 rows. 30 p. Rubber. Green string.
13 - 14 rows. 30 p. Rubber. Beige band.
15 - 16 rows. 30 p. Green stripe.
17 - 18 rows. 30 p. Beige Strip.
19 - 20 rows. 30 p. Here already thread a beige cut and continue green.
20 - 26 rows. 30 p. Rubber, green thread.
If you want, you can make a rubber longer.
27 row. 30 persons. P. Go to a feet, then we will knit her.
28 row. 30 is elevated. P.
29 row. The first loop removed (CH. P.), 28 persons. p., 1 Ost. (I leave the loop on the needle without tolding).
30 row. 1 OST. (left in the previous row), 1 CH. p. 27 izn. p., 1 Ost.
View at the end of the row.
31 row. 1 OST, 1 CH. p., 26 persons. p. 2 Ost. P.
32 row. 2 OST, 1 CH. p. 25 is elevated p. 2 Ost. P.
33 row. 2 OST, 1 CH. p., 24 persons. p., 3 Ost. P.
34 row. 3 OST, 1 CH. p., 23 is elegant. p., 3 Ost. P.
35 row. 3 OST, 1 CH. p., 22 persons. p. 4 Ost. P.
36 row. 4 OST, 1 CH. p. 21 izn. p. 4 Ost. P.
37 row. 4 OST, 1 CH. p., 20 persons. p. 5 Ost. P.
38 row. 5 OST, 1 CH. p. 19 izn. p. 5 Ost. P.
39 row. 5 OST, 1 CH. p., 18 persons. p., 6 Ost. P.
40 row. 6 OST., 1 SNP., 17 IZN, 6 OST.P.
41 row. 6 OST., 1 CH. p., 16 persons. p., 7 Ost. P.
42 row. 7 OST., 1 CH. p. 15 izn. p., 7 Ost. P.
43 row. 7 OST., 1 CH. p., 14 persons. p., 8 Ost. P.
44 row. 8 Ost., 1 CH. p. 13 izn. p., 8 Ost. P.
45 row. 8 OST., 1 CH. p., 12 persons. p., 9 Ost. P.
46 row. 9 OST., 1 CH. p., 11 is elevated. p., 9 Ost. P.
47 row. From this row, we begin to add the number of hinges involved, due to the left, tie to them at the end of the row, one in each row.
9 OST., 1 CH. p., 12 persons. p., 8 Ost. P.
48 row. 8 Ost., 1 CH. p. 13 izn. p., 8 Ost. P.
49 row. 8 OST., 1 CH. p., 14 persons. p., 7 Ost. P.
50 row. 7 OST., 1 CH. p. 15 izn. p., 7 Ost. P.
51 row. 7 OST., 1 CH. p., 16 persons. p., 6 Ost. P.
52 row. 6 OST., 1 CH. p. 17th is p., 6 Ost. P.
53 row. 6 OST., 1 CH. p., 18 persons. p. 5 Ost. P.
54 row. 5 OST, 1 CH. p. 19 izn. p. 5 Ost. P.
55 row. 5 OST, 1 CH. p., 20 persons. p. 4 Ost. P.
56 row. 4 hundred., 1 cH p. 21 izn. p. 4 Ost. P.
57 row. 4 OST, 1 CH. p., 22 persons. p., 3 Ost. P.
58 row. 3 OST, 1 CH. p., 23 is elegant. p., 3 Ost. P.
59 row. 3 OST, 1 CH. p., 24 persons. p. 2 Ost. P.
60 row. 2 OST, 1 CH. p. 25 is elevated p. 2 Ost. P.
61 row. 2 OST, 1 CH. p., 26 persons. p., 1 Ost. P.
62 row. 1 OST, 1 CH. p. 27 izn. p., 1 Ost. P.
63 row. 1 OST, 1 CH. p., 28 persons. P.
64 row. 1 CH. p. 29 izn. P. The heel ended.
View from the front side.
The depth of the heel was 5 cm, considering that the sock would also be 5 cm, we need to tie a 15 cm with a bullish stroy.
65 - 120th row y30 p.
125 - 160 rows. We repeat the ranks from the 29th to 64. It knit sock.
161 row. Take at the top of the sock, climb the foot. Knit strips of two rows, alternating a beige strip with green. The task that is now worth it is the connection of two parts of the sock, the bottom (foot) and the top (hidden). We will connect together the lateral loops of both parts.
At the foot of a free needle, we seem to see the first neighboring needles on which the loop, loop.
Then, on the same (right needle), remove the first loop from the left knitting needles.
162 row. We subscribe from the foot 1 loop.
Remove the first loop with the left on the right spoke.
And they are tied 28 eznes. P., the last two latch together (those that were removed in the previous row).
163 - 220 rows. We continue to knit: remove loops on the right back, one with the bottom and one from the upper part, 28 loops are tied, according to the side (facial or irons), and the last two knit together.
221 - 222 rows. Two green rows of stocking stroke. Beige thread cut.
223 - 228 rows. We begin to knit green thread, continuing to connect the front and back socks.
229 - 230 rows. Beige band.
231 - 232 rows. Green stripe.
233 - 234 rows. Beige band.
235 - 236 rows. Green stripe.
237 - 238 rows. Beige band.
239 - 245 rows. Green stripe.
Knit together the first two loops in one.
Return this loop to the left needle.
Again the two first loops knit together.
We return to the left knitting needle and so to the end until one remains.
Cut a string, fix and hide the end.
The second sock knit is similar. Socks are ready to try on.
This way of knitting socks is suitable for anyone who can knit on spikes Facial and hinges.
Dina Kiselev specially for the site of needlework lessons.
Having learned knit woolen socks, you can protect all your family from cold weather in winter. We will explain how to knit socks with knitting. Having mastered the recommendations for beginners step by step, you can proceed to more serious things. You will not be damped jacquard patterns, the "Patchwork" style, knitted ornaments and braids on socks.
p.S last to become we considered how to bind socks with crochet
You can create knitted socks on the knitting needles with patterns intended for women, men and children - this will not be much difficult for you.
How to tie socks on 5 knitting spokes for beginners
We will tell you how to tie socks on 5 knitting needles for beginners. With this technique, knitting products are obtained without seams. Knit socks on the helix so that they perfectly fit to the leg. The process begins on top of the sock towards the Majo, knitting must be operated. The loops are recruited on four of the prepared spokes, while the fifth is a working.
To calculate the number of necessary loops, it is required to take into account the circumference of the leg. Two such circumference will be required:
- in the area of \u200b\u200blifting, measured from the heel to the rise under the tilt;
- legs near the foot, measured above the bone, in this place the foot is the finest.
Both of these sizes must be added and obtained to divide into two, obtaining an average circumference value. If the circle in the rise was 31 centimeters, and in a thin part of the leg - 21 cm, then their sum is 52 cm, and its half - 26 cm. The set of the looping is calculated precisely from this size. The number of loops obtained by calculating should be rounded to a multiple number four so that there are no problems with the work on four knitting. 
By typing the required amount of looping, we divide them equally between four knitting needles, start the circular method of knitting to form an elastic band. Its size usually leaves 5-6 cm, you can optionally reduce it. Next, the method of facial knitting before the start of the heel is prone to 7-8 centimeters.
Knit the heel of sock on the spokes is necessary from the half of the loop, the rest remain on the knakers that are not currently applied. On two of the spokes, 5.5 - 6-centimeter canvas fit, which is height height. Its size is associated with the rise of a specific leg, can be done and smaller, but after the 35th size it is an unchanged value. 
Now it is necessary to ensure the heel the necessary form, make it descent, sharing the loop into three equal parts. If the number of loops turned out to be not divided into three, that is, there are excessive loops, they must be connected to the central heel. Located in the center of the loop, it is possible to continue to knit further, and the loops forming the side sides of the heel are connected to the locked in the center of the peels.
The descent of the loops should be offered, and end from the front side. Two thirds of all loops are written by involving, after which two loops are progress together - the last of the central and initial - from the third part. Further knitting unfolds and continues on the facial healing side. During the turn, removed without changing, initial from the loop.
Knitting continues facial, and the last loop of the central loop with the initial loop from the first part is pronounced together by the method of pulling (the first of the loops is removed, the second knits, as faithful, after which the removal of the loop is reckoned to the previously connected). Next, knitting turns again, the initial loop is removed without its inspection, and everything is repeated. 
Knitting should be continued until the side loops are closed. Next, the loops on the side heel part are gained, in each even row one of the loops is recruited, and another loop is made, therefore, three rows are recruited. Next follows the transition to a circular way to knitting.
The loops left on the spokes are taken to work, the loops are recruited from the side of the heel and from the center of it. The initial row knives the facial type loops, then in each even of the circular rows, ranging from the tip of the first knitting needles, the 3rd and 2nd loop with a front-type loop, and on the 4th knitting of the 2nd and 3rd loops Bug together with the method of broach. So the heel is better adjacent to the leg. 
The refusal is repeated until the number of loops becomes equal to the primary, which was typed at the very beginning of work. The foot fit in the circumference of a viscous facial type before the start of the thumb either before the tip of the little finger. Next tested. Loops are reduced: In an even row, the 3rd and 2nd loops from the tips of the first and third knitting needles are jointly pronounced using a facial type of loops, and on the 2nd and 4th knitting needles, together the second and third loops can be pronounced by a broach method. When only half of all loops remain, these removal starts in all rows until four recent hotels remain. It remains to pull them with a thread and tie. Now you have an idea how to tie socks with knitting.
How to tie socks on two knitting spokes
Having learned to knit the socks of a simple model with the help of five spokes, let's see how to tie socks on two spokes. In this case, you can also apply a circular type of needles. This way you can connect beautiful socks with knitting knitting, the schemes allow you to get different patterns of patterns. Some worries that with this knitting technique there remains seams on the sock. But it is enough to complete it beautifully, the edges are connected correctly, so that neither the view nor to the touch this seam is noticeable.
Video examples of mating on five spokes
Knitting socks with five spokes for beginners. Female sock with a rubber band fit on short spokes, the size of which is 3.5. For knitting, you need to dial 48 loops, which are evenly distributed at the rate of 12 loops per knit. 
Video lesson:
Socks for beginners. Knit on five knitting of the cuff and to the Majuska. Spokes No. 2. Yarn accounted for 100 grams of 250 meters. In it, the fiber is half woolen, and half-acrylic. Socks are designed for the 35th - 37th size. The length of the sock is approximately equal to 20 cm. This is a classic way to create socks. 
Video lesson:
The simplest classic, seamless, grandmother's socks associated with five spokes. Designed for the leg of a two-year-old child, in which the length of the foot is 14-15 centimeters. The spokes number 2 - 2.5, the yarn produced by Pucher, "Rustic", contains 100% wool. Per 100 grams account for 250 meters of thread. It will not hurt to have the remains of the same wool other colors to create decorations. 10 loops are recruited on each of the spokes. 
Video lesson:
Children's socks knitted. Since the sock is small, it is possible to knit on three spokes, and 10 loops are recruited for each. Work begins with knitting gum 1: 1. 
Video lesson:
Socks for beginners associated with spokes. The yarn must have the same thickness as the needles. If you take the thread thicker of the spokes, the sock will turn out more dense, and from the thread thinner the knitting spokes will be less dense. Socks will be connected in two threads. Yarn has 200 meters of length per 100 grams. For the sock and heel zone, a synthetic thread is in addition to woolen. You can use nylon thread or fur with admixture of synthetics. The spokes are used with a diameter of 2.5 millimeters. 
Video lesson:
Video examples of knitting on two spokes
Warm socks without seams on the size of the foot 37-38 will require 60 grams of yarn, half consisting of wool and half-acrylic. In the Motke - 240 meters accounted for 100 grams. You can use 3.5 or 4 mm diameter knitting needles. The work begins with the front part, then the fabric of the sole and at the end - the heel. Socks knit on two spokes. 
Video lesson:
Simple socks knitted on two spokes. On two knitting needles, it is easier to knit, although it turns out a sock with a seam. Spokes No. 3.5 and yarn are used, in which 100 grams account for 240 meters. 50 loops are recruited - 48 to the sock itself and two edge loops. 
Video lesson:
Socks on two knitting knitted from a semide, which will require about 100 grams. The spokes were used # 2. Socks are designed for the 37th size of the leg, but if you want, you can increase the size. On the inside of the sock is formed by seam. 
Video lesson:
Simplified method of mating socks using two spokes. It is twice as fast as five knitting. To clarify the number of loops, it is better to connect a sample of 10 or 20 loops. After the elapses of the gum can go to knit facial stroke. 
Video lesson:
A simple way to manufacture knitted socks on two spokes. Many people are inconvenient to work with five knitting needles, and after all, socks that do not have a seam can be associated and using only two spokes. It is desirable to use a varicrene, sufficient residues. The spokes were used No. 3.5. 
Video lesson:
As my mom says, it is easierless of the way to knit socks.
She told me on the phone, how to knit these socks on two spokes. I tried and I liked it. (For many, the seams are unacceptable, so I warn you: there are 1 seam in socks).
About the number of loops on 1 sock, the thickness of the spokes and threads: I knit socks from the remains of the yarn, so each time I choose the number of loops (42-50 loops), it is not too convenient, but this is how this method allows you to link socks from any yarn. I just knit the sock half, trying on and dissolving, if narrowly.
I will tell the general principle that realized which, you can knit socks with any pattern, any pattern, any length.
First, on two knitting knitting Elastic (in full width), holding sock on the legThen the part of the sock is prior to the heel (by increasing the number of rows, you can link high golfs), hereinafter - the heel and then knit to the leg length.
The left and right sock knit mirror. At one heel on the right, another - on the left, when stitching, the side seam is obtained from the inside of the leg.
If the 2 part of the sock (in the figure) does not knit, but to make a small rubber band, then the socks can be obtained like slippers - low.
The main thing is to understand how to knit the heel, the rest can be knit differently.
- Step 1: Rubber (marked in the figure above).
48 loops dial on the needles and knit with a rubber band 2 x 2 or any other. (It all depends on your threads, spokes, knitting manners and leg thicknesses.
Alternatively, you can bind the gum, it is quick to touch the threads quickly and try to check the width of the future sock, whether your foot will fit.
- Step 2: Handle of the sock (from gum to heel)
Facial surface - Pouring rows: Izn. Pretley. Facial rows are facial.
You can also knit any other pattern. Height - as you like.
Usually I do not knit this part. I do not like high socks.
- Step 3: Heel "Capchik"
Knit facechair first 21 loops on one sock and last 21 loops on the second toe 14 rows. In each row 1, we remove the loop, and the last one is in charge.
It does not matter, 42 or 50 loops you scored, it is 21 loops to show for the future heel. And so 14 rows.
You can assemble the rest of the loops on the pin or wash on the needle - just do not touch them while you knit your heel. They will not interfere. 
Tied14 rows (photo above). The second sock will look mirror.
And now the most complex is the recovery of the spring heel. She will be similar to the cap.
15 row of heels: from 21 loops to check 13 kettops, and 14 and 15 loops together.
There should be 6 loops on the needker at the end. We do not see them.
I turn the knitting on the wrong row:
16 row: 6 unbound loops remain on the knit, knit on. The six last loops are not knit again and leave on the needle, but in front of them 2 together (!!!)
If you are surprised - see the photo below. With such a knitting, the heel will become volumetric. Nothing complicated - at the end and beginning of knitting for 6 unbound loops.
The first loop of the row is always removing
17 row: the last loop of the row to check with 1 of the "remaining 6" (5 not left)
18 row: the last loop of a series of lying from 1 of the "remaining 6" (5 unbound remained)
19 row: the last loop of a series of lying with 1 of the "remaining 5" (4 unbound remained)
20 row: the last loop of the row to check with 1 of the "remaining 5" (4 unbound remained)
21 row: the last loop of the row to penetrate with 1 of the "remaining 4x" (3 unbound remained)
22 row: the last loop of the row to check with 1 of the "remaining 4x" (left 3 unbound)
23 row: the last loop of the row to check with 1 of the "remaining 3x" (2 unbound remained)
24 row: the last loop of the row to check with 1 of the "remaining 3" (2 unbound remained)
25 row: the last loop of the row to stick with 1 of the "remaining 2x" (left 1 unbound)
26 row: the last loop of the row to penetrate from 1 of the "remaining 2x" (left 1 unbound)
27 row: the last loop of the series to check with 1 of the "remaining 1" (0 unbound remained)
28 row: the last loop of the row to check with 1 of the "remaining 1" (0 unbound remained)
Hurray, the heel became bulk: 
And so, there are only 7 loops on the needle, the heel began to resemble the cape.
Next, from "empty sides" stretch 7 loops on each side and continue knitting to the toe to the fingers of the facial stroke. Crochet pull out the loop easier: 
P.S. Since 21 loops are taken at the beginning of a row, and in another sock-at the end, socks can differ on 1 row in some places near the heel. It is imperceptible with sock.
- Step 4: Sock length (from heel to completion)
Cut from 21 loops of the already bound heel row to the end along with those loops that we left on the spin unbound (or on the pin).
Knit facechair or any pattern, sometimes having reduced the loop (if you wear a sock) to the end of the maiden. 
Complete the sock, changed the remaining loops by 5 spokes and reduction in each row 5 times. Or carry out a sock on 2 knits, having reduced each row 5 times. The remaining few loops pull the thread, sew sock. 