Hospitals 

How to make a rooster of bulk paper. New Year's toy rooster from felt with his own hands, master class with photo. Paper Rooster: Cutting Templates

Petukh-Drachun paper with his own hands

This is a Petya-Zabyaka,

The day can not live without a fight.

Spare who is where

Petya is angry in the morning!

Progress

1. Gently cut down all the details of the crafts.

Cooked Patterns

2. Pants (2) joints, smeared with glue a large white strip and gently align the edge. On the one hand, two white triangles, flaying them glue and incur inward. Little white valves of bent inside, smear glue and gently glue to the stand (3) on the marked circle.

3. Paves (4) with harmonica. Then take them on the stand in front of the pants close to them. Look at how you should get on the drawing of the finished craft.

4. Rear claws (5) Sluts on dotted lines, flashing glue the inner part of green stripes and glue for them to the stand to the stand behind the pants.

5. Skool torso (1) in the form of a cone. To do this, smear glue white stripes and gently compatible edges so that the white strip is inside.

6. Split collar (6) in the same way as you glued torso (1). It put him on the torso and glue it to him only on the side of the seam. The collar will lag behind the neck and stay only from behind, but it will give our handicap.

7. On two parts of the tail (8), under the line of the pyryshki to the marked sediment places. Begins White stripes on both details inside, smear them with glue and spools together. Also flashing glue that part of the details of the tail, which remained not cut. Split two details. Then smell glue white stripes on the tilt cock and glue it to the body (1) from behind in place of the seam.

8. Head (7) Square for scallop and keyboard. It is put on her neck (1), pre-smeared with glue the top of the neck.

9. On the wings (9), cut the pyrshki, carefully cutting through the line, but not to the end. Blots them to the torso (1) on the marked places.

10. Squels for small white spurs valves (10) and take them from the bottom of the pants above the rear curls.

11. For stability, the stand of the crafts on the tight cardboard of the appropriate size is turned off.

This funny cockerel can keep in themselves different little things.

Rooster - symbol of 2017, with his own hands made from various materials, will become a wonderful memorable gift for a loved one.

And according to believe, he will also bring good luck to the house where it is settled.

A simple symbol of 2017, with your own hands, you can make it possible to make it possible to make a craft in the form of a wall panel. At the beginning of work, you will need to make a background (sky and grass) layer of plasticine of the corresponding color. In the sky immediately do clouds. Then the brown elevation is laid out, and sunflowers are planted near it. In the hedge, we replenish the bright rustic rooster, making it quite convex.

From plasticine it turns out a real New Year souvenir - a picture with a root.

Picture with a cock - symbol of 2017

New Year's cockerel can be made of salted dough. Look more on video:

You can make a rooster from a bright cardboard sheet. To do this, we cut off one of the corners of the cardboard around the circle and turn it into the cone. From the remaining paper, cut the wings, and from the red cardboard - scallop, beak and legs.

By the same principle you can make small funny cocks.

You can arrange them in the form of a postcard, the decoration of which will be the wings of feathers.

The original cockerel is obtained from paper rings and a triangle, which easily turns the strips.

And if the caller makes a paper cylinder, the rooster will become more stable.

Expanding the cylinder vertically, you get the basis for the original suspension.

Pendant pendant

And gluing his lower part, you can make interesting souvenirs. Special chic they will give the wings of feathers.

Pries can also be used when creating a cockerel from a bright shopping glove. If you replace it with a glove from knitwear, the craft is more durable.

The smallest creators will be under the power to perform a rooting in the technique of drawing and appliqués.

Print and cut the template for drawing a "Cockerel".

Pattern for drawing "Cockerel"

Color the cockerel in the most rainbow colors. It remains to decorate a roast tail. Cut the bright stripes from colored paper and please ride small tubes from them. We glue the tubes on the tail.

Figure and Applique for the little ones "Cockerel"

To make the cock even brighter and more beautifully sprinkle it with sparkles.

Little kids will be able to make the applique of the "rooster" from colored feathers. Two tight paper sheets are based on, between which the wand is glued.

Applique of colored feathers "Rooster"

In kindergarten, you can make a joint work "Cockerel from Ladoshek".

The beautiful applique of Petushok is obtained from coffee beans and real feathers.

Applique "Rooster" from coffee beans

Predeshki and in the manufacture of roosters-bells, the foundations of which are excreted from or clay. And as the basis, it is convenient to use cells from cardboard packaging from under eggs.

You can turn into a casket rooster a whole carriage for chicken eggs. Fill it with small candy - and already ready a gift for kids!

In this paper, you can use other cast materials - for example, disposable plates. Pendants of them differ simplicity of manufacture.

Funny cocks are obtained from colored clothespins, decorated with pieces of felt.

And from a piece of knitwear or sitse tissue, you can sew a real soft toy in the form of a symbol of the year.

Beautiful New Year's roots are obtained from a multicolored felt. Details of patterns connect with a thread or glue. The inside of the crafts fill with cotton.

Fetra can make a flat root on a stick.

Skillful craftsmen will be under the power to make a cockerel from colored wool.

Look at the Master Class video: "New Year's Cockerel from Fetra."

It looks very beautifully a cockerel created in the technique.

It is not inferior to him on the originality and beauty of the rooster in a wall panel, decorated from flat colorful butt. Using buttons of different sizes, you make a more expressive picture.

Applique "Rooster" from buttons

And placing such a panel into a glass frame, you will noticeably extend the life of its service.

Picture "Rooster" from buttons

A charming colorful rooster is obtained from beads.

Very different cocks can be done using vegetables and fruits. This symbol of the year you can decorate a festive New Year's table.

Decoration of the table "Rooster"

A very spectacular rooster is obtained from apples.

Parts of the crafts connect with a toothpicks.

Look at the video - how to make a fiery cockerel from Formin.

Show the kids on the topic, how the symbol of 2017 is made with your own hands, the master class - and they will definitely surprise you with unusual faiths and solutions!


Necessary materials:

Scissors
- Set of colored paper
- Box
- PVA glue

Stages of work:

Prepare boxes of different values. From the box, cut down the part that closes the box, over the lines of bend, make cuts (they should be ½ height of the box itself). On the cuts, beaten parts of the box. Two opposite parts are wings, and the rest are tail and head. Wings round up. Tail Take up to the very base. Cover my head, moving away from the top and to the very base, so that the form of the triangle is. Decorate the cradle: make earrings and scallops.

Carnish Cockerel with your own hands

You will need:

Plastic bottle - 3 pcs.
- Yellow ball from dry pool
- Red and yellow plates
- Red and yellow disposable cups
- Black marker
- Stapler
- simple scotch
- double sided tape

Work process:

From 3 bottles, cut the upper parts, secure them with a scotch with each other. On the edge, care about disposable cups. They must be attached to the neck of the rooster with the help of tape. Colors must be alternating. From disposable plates, cut the edge, make cuts from the inside. As a result, you got feathers. Tail and feathers assemble a stapler. Insert the tail in the incision. Connection location Cover the packaging paper. Wings also need to be cut with disposable plates. Hold your head with bilateral scotch. Scallop, beak and bead cut with red disposable plates. Insert the cut parts into the cuts on the head. The eyes are also created from disposable plates.

Cockerel 2017 do it yourself

You will need:

Beads for eye
- hot glue
- Boxes from eggs
- Groundovka
- Acrylic paints
- balloon
- Old newspapers
- scissors
- 2 beads
- PVA glue

How to do:

Two cones from the tray from egg eggs cut out one side of each cone cut. Cut cones connect with each other cut down. You will have one big cone with 4 petals. In order to create a neck and head, connect 5 cones among themselves. To the top they will expand and become larger in size. Cut the scallop from the side of the tray. Cut the beak from the lid, which will consist of two parts. Feathers are also created from cones. On top of the cardboard, they are fixed with hot glue. The length of one wing is - 15 cm. Similarly, make billets for the tail.

The next stage is the creation of foot. From the copper wire, bring the shape of the paws. In order to give the necessary effect, twist the corrugated tube. Between the corrugated and metal tube insert the left tail. For strength, the lower part is filled with glue. Cut claws from the bottom. They must be long and narrow. It is necessary to fix them with glue. Feet with a torso paint the aerosol paint.

Prepare a stationery knife and a construction foam. All sections should be neat and smooth. You can cut the items separately. In complete, glue them with glue. Bring to the desired form can be sandpaper. Additionally, treat acrylic smear, wait full drying, reappear and process the PVA glue. It will allow paint better to take.

Staining start from my head. Stick your eyes on the head. To create a beautiful scallop, make melts on paper, transfer to the foam, cut out, stick to the right place. Take care of the preparation of the shape for the wings. Leave the back open. The top of the wings close up with feathers made with corrugated bottles. Last row bent the wing inside. Slide paint, leave for drying, attach the perforated ribbon and screws. Take a tail. Take the grid, bend it. Cut the feathers from bottles. Separately paint them on both sides. First apply black, and then - a little blue. Attach feathers with wire to the grid. As soon as the paint is dry, cut the feathers for another two parts so that the tail seemed to be more lousy.

You will enjoy it.

For the back, put the feathers from a transparent bottle. The width of one pen must roughly compose - 2-2.5 cm. Attach them on the back at once 3-4 pieces. Use screws for fastening. When you fix feathers on the neck, cut off the top. Stick the last row of feathers to hide the hats of the screws. Smaller feathers stick in the nape area and side from the ridge. All parts that you were painted, close the construction scotch and bags. First apply yellow paint, dry it. Add a few orange strips.

The final barcode is shores. Cut 2 strips, make an incision to the stationery knife. Insert them between the metal plastic and corrugated pipe. Delicate scorch with a yacht varnish.

How to sew a rootier with your own hands

You will need:

Cardboard
- Threads, scissors
- orange, blue-green, black and white fabric
- Pinzet
- Vata.
- Scotch
- Glue
- Colored paper

Stages of work:

On the cardboard sheet draw a sample toy, cut it out. Discuss the wing separately, cut, see how they will look. Sample cut into separate parts so that you feel comfortably work. Each piece of the sample match with a separate piece of fabric, cut out in turn from the fabric every item. Each item should be 2. Head cut out of white fabric, the top of the wing and the torso - with a blue-green fabric, and the lower part of the wing and tail - with black fabric. Beard, paw, beak, scallop and eyes Make with colored paper. All parts for head Sust. With the sewing of the scallop, some difficulties may arise. The fact is that it is wider than the head. Sew it better outside. Stick eyes with colored paper.

Cooker suit with his own hands:

To the torso, make an input of 1.5 cm. Details Connect from the inside. The tip of the foot is inside. Wings Sustice outside, put a soft filler inside. If it is not at hand, an ordinary cardboard is suitable. The lower half is sustaining from the outside, enter to the body, connect through the cardboard of the seam. Tourib try on the head. Sew covers with a torso. The connected details fill with cotton. You need to fill through the hole in the tail. The hole is very small, so you need to be filled with a crawler with small portions. You may have to use tweezers. Tail details Squeeze out the outer seam, fill it with cotton.

Paws can be made of cardboard or piece of fabric. Pick the fabric of the desired size and color, make several square parts. Cut the tips, sew the oblong paws. Fill with cotton. To the body of the suite of the paws, wings, tail. Cut, not assigate. Toy cockerel with his own hands ready.

Cockerel do it yourself from paper.

This is the easiest option to create a craft. There are several ways. You can use the technique of origami, queening, cutting with scissors, etc. Paper craft can be put or hang on the Christmas tree, glue the window, decorate a festive table. Excellent solution - the decor of the napkin. It will look quite restrained and at the same time - original. If you are using origami, you can immediately fold the napkin in the form of a cock. Schemes we will provide you.

Cockerel do it yourself patterns.

Learn how easy it is to crash a rooster from bottles, coffee beans, fabrics. Look at how to make a rooster from salt dough, from egg trays.

Criting Cock from egg trays


This is what you can make a rooster. This is a completely thrust material, but it turns out wonderful crafts. To work will be required:
  • trays from the eggs;
  • acrylic paints;
  • thin white paper;
  • cardboard;
  • newspapers;
  • scissors;
  • glue pistol;
  • tassels;
  • pencil.
From the discovering parts of the tray, cut the blanks, which are similar in shape on elongated petals. When you make the head of the rooster, they must be glued with thin white paper to create a flower similarity. From the side of the box cut the bird's beard. The rounded triangle will become his beak, this workpiece must be glued down. For Krev, you will need 2 such details.

Cut from the cardboard the wings of the bird, taking advantage of the adhesive gun, plunder their billets from egg trays, similar to leaves.


Most time, you will have to expect when the body of the rooster is driving out of papier-mache. Therefore, it is better to start working with its formation. Cut the newspapers on the strips, in the container, distribute the glue with water in proportion 1: 2. Perch paper here, stick it on an inflated balloon. To dry out this item will leave for no one hour. When this happens, pour the ball to the sharp object, remove it through the left small hole.

This rounded workpiece must be cut into two unequal parts, permanently insert into greater to increase the duration of the part. Shill these elements with a glue gun.

While Papier-Masha dried up, you had enough time to form your head and neck of the rooster. To parts, which looks like a flower with elongated petals, made with egg tray petals, glue two triangular blanc billets, a comb cut from cardboard.

Insert into this floral blank the second the same, then the third, fourth and fifth. The head and neck of the birds are ready. Stick this item on the side of the half of the Paper-Masha ball. For this, the adhesive gun is dripped inside the neck, the strip from the cardboard so that it looks out the outward bottom. This shortcut is glued to half the body from papier-mache.


To make the tail, drew on the lid from the eggs semicircular lines, cut off on them.


Stick the tail to the back of the body. All, you can paint the cockerel with acrylic paints, when it dries, hand the address of the addressee or put it on the most prominent place in my house, as a bright holiday attribute.

You can make a rooster with your own hands not only for the new year, but also for Easter. Then you put painted eggs in his semicircular body, thus make a festive table.

Symbol of 2017 from plastic bottles

If you decide to meet the New Year at the cottage, then make a rooster - the symbol of 2017, which is not terrible neither the snow nor water. Plastic bottles are perfect for this.


To make a rooster with your own hands for the year of the rooster, prepare all the necessary materials, in particular
  • five-liter canister;
  • plastic bottle of 5 liters;
  • metalplastic tube;
  • 2 plastic bottles with a volume of 1.5 liters;
  • corrugation;
  • thick copper wire;
  • plastic bottle for feathers;
  • perforated ribbon;
  • acrylic smear;
  • fine mesh;
  • sandpaper;
  • awl;
  • construction foam;
  • stationery knife;
  • glue pistol;
  • self-tapping screw;
  • scissors;
  • screwdriver.
Right now you will learn how to make a cock from bottles. Step-by-step instructions will help it. Make this design, using screws, scissors.


Bend the metal plastic pipe to make two legs of the rooster. Attach them to a five-liter canister with self-tapping screws. To make the neck of the animal, cut a large cloth from a 5-liter bottle, roll it in the form of an envelope, secure self-drawing. From half-liter bottles, cut their upper parts below the shoulders, male. Put them on top of the birds of the bird, also attach these details with self-draws or adhesive gun.

To make bird feathers, cut off the neck of the neck. With the help of scissors cut 5 longitudinal feathers.


Put on the feet of the rooster corrugated tubes, thickened pieces start drawing up with rugs. To secure them, make a selection in each two holes, insert a piece of wire that needs to be tied to the base.


Cover the bird's body with feathers, starting from the point of growth of the tail. The backrest is not yet issued.


Roll the wire so that you get two paws, for each three fingers, put on these billets segments of corrugated pipes.


Cut long and narrow claws from the bottom of the bottle. Attach them on a glue gun or at the "moment of installation".


Cover the resulting workpiece of paint from the can, using one for the body, and another color for the feet.


From the construction foam cut off the head cock, using the stationery knife.


Take the sandpaper, Skarite this item, then apply acrylic smelting.


When this coating can dry, make the surface with a smooth surface with the help of sandpaper, then cover the PVA.

In order for the paint well on the head of the cockerel, the trick is used, pre-covering it with PVA. In this case, the paint is well adjacent, and its layer will be more durable.



From a fine grid, cut the part that will become the wings back and the tail of the rooster, we glue the long blanks from the plastic bottle to arrange this part of the feathers. At the top of the wings are made of corrugated bottles.


Paint the wings when the solution is driving, attach this part of the body using perforated tape and screws. Cut from bottles of 2.5 and 2 liters of elongated feathers, cutting each container on 5 parts. Paint them on both sides, after drying, attach with wire to the metal grid.


To make it easier to paint plastic bottles in a light color, take transparent, cut the feathers for the back. Attach them with wire, at once 4 pieces per screw.


Attach the bird's head with long screws in your place, close the painted parts with polyethylene, paint the rest. Make spurs from the wire for the rooster, after which you can put it on the intended place in the country or at home.


It is even easier to make the next bird from plastic bottles.


To do this, you will need:
  • two plastic bottles of 2-2.5 liters with small necks, and one of the same volume, but with great;
  • disposable plastic cups of two colors;
  • disposable plates;
  • wrapping paper or garbage package;
  • plastic ball;
  • eyes for dolls;
  • scotch;
  • stationery knife;
  • glue;
  • scissors.
Cut the first plastic bottle with a short throat below shoulders, the second and third process as well. To the first to attach the other two so that you have a blank for the tail on one side, and on the other for the body and the throat, connect the parts with the help of the tape.


In plastic cups, cover the upper part on the strips of 8-10 mm width. In length, they will take a third of the height of the glass. Put these billets on a high neck bottle, alternating color. The last cup do trough the bottom. Touch this container not only with one, but on the other side on thin strips. The middle will remain solid.

Just below the rim plate cut out semicircular feathers from plastic plates, on the one hand, cover them with scissors, so that thin feathers come out. In the bottle, which is located on the opposite side of the neck, make an incision, insert the tails and fasten your thiefs here.


Attach the ball to the top cup, fasten it with a scotch. Cut place for tail Cover the packaging paper or part cut in the form of a flat package for garbage. Cut out the plastic plates of the wings, take them to the sides of the bird's poultry.


From plastic plates Cut the comb, a beard, beak cock. Make three cuts in a foam ball, insert these workpieces here, for the larger fortress, glue them. Take ready-made eyes for toys, or make them yourself from a white foam plate, pupils cut out of a black package for garbage. Stick eyes.


If you want to know how to make a rooster from bottles even faster, then look at the third master class of this section.

  1. Card the bottom of a large plastic bottle of bottom, put it on the peg of the fence or specially poured in such a case a stick into the ground.
  2. If the bird is standing in the house, then push it the bottom of the strips of colored paper, wings and scallops make the appropriate shades from cardboard. If the rooster will be on the street, then these parts must be waterproof.
  3. Create strips from colorful garbage bags (tied or gluing those), wings, nose, scallop, a beard of colored plastic.
  4. Take two white covers from bottles, draw here with black acrylic paint pupils, stick them to your head.
  5. The tail is made of bottles of different size and color. Cut the snakes from them, scissors to lie almost to the shoulders on thin strips. Paste one bottle to another, fix them with wire, scotch or glue.

Salt dough cock

It looks great such a bulk picture, and it is performed in an unusual way.


To make such a panel, take:
  • 120 ml of water;
  • 180 g of shallow salt;
  • 370 g of flour;
  • 1.5 tbsp. l. vegetable oil;
  • acrylic paints;
  • rooster pattern.

  1. You will make the cardboard image of this bird when you translate the presented pattern on paper.
  2. Mix flour with salt, pour vegetable oil and water here. Mix well the dough, cover it with a fabric napkin to stand for 20 minutes.
  3. Now you can roll it into the reservoir, put the pattern from above, cut off the rooster from the salt dough. Apply the barn of feather on the tail, wings, neck to the workpiece.
  4. If you want the bird to be volumetric, then separately cut the wings, buttons, the upper part of the scallop.
  5. Leave this result of creativity to dry dough. To do this, you need to place the product in a well-ventilated room to give the workpiece greater strength. Seeing it during the day in this way, then heat the oven up to 50 degrees.
  6. Two culinary shovels transfer it to a baking sheet, covered with flour-powered paper. Make minimal fire, dry at this temperature 2 hours. Remove the product, cool it out.
  7. Now you need to paint our fiery rooster with acrylic of different colors, and then - varnish.

If you have a colorless nail polish, it is perfect for painting the rooster from salt dough.


You can cut out the volumetric rooster of salt dough. Then the figure you need to dry well for two days.

Crafts of cocks from coffee beans do it yourself


This is not a simple rooster, but a magnet. To make it, you need to stock:
  • a piece of burlap;
  • segment of red felt;
  • coffee beans;
  • a sheet of cardboard;
  • rhinestones and sequins;
  • crochet;
  • threads;
  • adhesive pistol.
Draw on the cardboard the image of the future hero, that was a more realistic handicraft rooster symbol 2017. You will need to cut out the contours of this character. It is also necessary to cut a semicircular wing of burlap and scallop with a beard from felt.

Brown pencil paint cardboard torso Cockerel. At the bottom with the help of a needle, in which the thread is put in the tone, form two legs of the rooting, paws from cardboard, painted in brown, like the billet of the tail that needs to be glued into its place.

Make a beautiful lush tail from the threads, stick it to the cardboard blank. Also stick on the torso, bypassing the wing, coffee beans, attach them to the ends of the paws. On the back of the body, glue the magnet. Decorate wing with sequins and rhinestones.

Sew, knit, embroider crafts

These handicraft techniques will also help you create crafts for the year of the rooster 2017. If you know how to embroider, then the following scheme will help you. In this way, you can arrange a small decorative pillow, pocket apron, stitched from a monophonic fabric, or make a panel.


If you decide to tie a sweater for a child as a gift, calculate the loops so that this poultry is blocked in the center in front.

The diagram shows which color you need. So that they all looked well, knit white yarn sweater.


If there are no longer listed types of needlework, then make a root on a stick from the residues of ribbons, threads, fabrics.


Here is what should be prepared:
  • square from linen fabric with sides of 15 cm;
  • red fabric size 5? 20 cm;
  • multicolored ribbons;
  • soft filler;
  • threads;
  • jute;
  • twig;
  • red yarn;
  • needle;
  • wooden wand.

  1. Fold the linen canvas diagonally, slightly cut one corner. Still one and the second side of the corresponding seam, but leave free space between these sidewalls, which is marked with a pencil. Through it, you later bring the figure with filler, here insert and wooden wand.
  2. Insert the twig into the cutting hole in the corner, lock the red yarn with turns. This is head and beak cock.
  3. Fill the workpiece by syntheps. Insert the wand there, secure this item, tightly tapping it with red threads.
  4. Take a strip of a red felt, turn it in half, put the cockerel on one and theder sides. Top and bottom, climb the thread to separate the scallop and the beard. Bearding the beard at the bottom to the scissors.
  5. Roll in half the satin ribbons of different colors, attach them to the tail, tie the red thread. Also form the rooster wings, just enter them on the sides.
  6. Black thread winding bird eyes or make them from beads. After that, the wonderful rooster symbol 2017 is ready.


Check out another idea, looking at the video. It tells him how to make a carpe of a rooster from Capron.

If children want to learn how to make it out of paper, then show them the second video.

The symbol of the upcoming 2017 will be a red fire cock.

As an original New Year's craft, you can make such a papers from paper with your own hands. And make it volumetric, and not just a silhouette.

This is what we will deal with today's master class.

Necessary materials:

  • double-sided semi-dwarf, white, yellow and brown tone;
  • black marker with a thin rod;
  • scissors;
  • pencil;
  • glue.

Stages of manufacturing a surround craft of a rooster:

  1. Since the rooster is a fiery, then we will make its torso red. Therefore, we take a sheet of paper of this tone and cut out a large circle.

  1. From the edge to the center of the circle, we make a break. We fold a circle into a cone.

  1. We apply glue on the sides and glue the figure.

  1. Meanwhile, cut out the yellow paper beautiful and big scallop.

  1. It is located on the Supreme cone.

  1. And then take yellow and brown paper and cut two elements.

  1. Yellow strip bend twice and glue the ends together to obtain a cockerel cocoa. But the brown rhombus is just bend in half.

  1. We glue a beard in the center of the cone. Apply the beak on it.

  1. Now make eyes from white paper. To do this cut the item in the form of glasses. Draw two black pupils. We glue the finished eyes on the muzzle Cockerel just above the beak.

  1. From brown paper cut down long strips, the width of which will be 1 cm.

  1. We fold every strip by the accordion.

  1. We apply glue to one bent part and glue it to the inside of the bird. On other ends, we glue the paws that cut out in advance of paper of the same color.

  1. Wings will be in a yellow bird. Cut them in the form of big hearts.

  1. Bend the sharp tip of each heart.

  1. We apply glue to the bent part of each wing and glit to the sides of the crafts.

  1. Now prepare items to create a lush tail. To do this, cut the strips of different lengths, alternating colors. The more the strips will be, the magnificent the tail of the rooster.

  1. Twist every strip.

  1. Connect strips to each other.