Hospitals 

How to make your own Christmas tree. How to make a big Christmas tree with your own hands - video tutorial. How to make a Christmas tree with your own hands from paper

A universal selection of gift ideas for any occasion and occasion. Surprise your friends and loved ones! ;)

Hello, dear readers! I was decorating the apartment before the New Year and realized: a DIY Christmas tree could help in decorating the room. And not just one. And not alone

Of course, I had several ideas that I want to bring to life in the near future. But when I tried to find master classes on the Internet on how to create these wonderful creations. Oh, what are they used to make them? I never would have thought of using some materials. So today, together with you, I will admire the masterpieces of human imagination in the field of handmade Christmas trees!

DIY Christmas (and not only) trees: master classes

Almost all the Christmas trees presented today are made using different materials. Some are very unusual, artsy, rich. I would even say elite. And others, on the contrary, are as simple and minimalistic as possible in their design. A la Ikea, so to speak.

DIY paper Christmas tree

The largest group today. You will see many representatives of the beautiful spruce species. Each one is different from the others, so choose

Origami

The simplest version of a paper Christmas tree is using a square. Fold the square in half (diagonally), bend the opposite sides to the center (like in an airplane) and that’s it.

Tip: Use this simple trick to decorate a greeting card or fold napkins beautifully.

Angular

First of all, fold a square of paper as shown in the photo. Then:

  1. Fold the structure so that the side corners are inside. This will result in a square four times smaller than the original one.
  2. Bend the right corner to the center,
  3. And left.
  4. Fold the right corner to the right.
  5. Fold this corner under yourself.
  6. Do the same with the second one.

Now turn the structure over and repeat steps 2-6 only for this side. All that remains is to trim the sharp lower tip and make a few cuts on both sides. Then bend each cut end and place the Christmas tree on the table)

Circles

To create this spruce, take paper and draw a circle on it, outlining it as necessary, as in number 1. Next, cut out the circle and cut each section to a small circle. Now wrap each of these small sections on both sides with the tips inward and glue them together. Process the entire circle in this manner.

For spruce you will need several rows. In the photo, for example, you see a beauty made of 15 layers with a cone top. The layers, by the way, are assembled onto wire by piercing the centers of the parts.

Panel for kindergarten

In kindergarten, were you given the task of making a spruce tree together with your child? Then this option is the simplest. Take thick cardboard and colored paper. Cut out triangles from cardboard, cut the paper into strips and overlap them. Even a child can handle this. Cut off the excess. You can glue a skewer at the bottom and stick it into the padding polyester.

Tip: the resulting product can be used as a bookmark.

Making crafts using available materials

To create this semblance of a fluffy-coniferous creature, you will need a long metal pin on a stand and lots and lots of scrap paper. Feel free to use newspapers, old magazines, etc.

Tip: Additional decoration of the Christmas tree can be done using paint in a can, which can be sprayed on the leaves. This will make them stronger and more durable.

Big tree of knowledge

The next beauty will be the spruce tree that brings knowledge. For it you just need to stack all the available books in a pyramid. I highly do not recommend hanging an electric garland, as in the photo: fires occur very often on New Year’s Day, do not neglect this. It’s better to put regular tinsel and balls on the ledges.

From tubes

Incredibly simple technology. Suitable for decorating cards and walls. Prepare several tubes rolled from paper rectangles. Glue each one in the intended place. The tubes can be made gradually smaller or with a “brush” (sometimes placing longer elements higher than necessary).

Glue button or sequin decorations on top.

Fluffy

For it you will need many, many paper strips, which will need to be glued in layers to a paper cone. And put on a cute cone hat on top. An excellent craft that can be done with children too.


For those who are passionate about quilling

Do you like to twirl paper spirals? Then prepare several strips of paper of the same thickness. Roll 17 pieces into a spiral and narrow one end of each. For the trunk, simply roll 4 tubes and place on a skewer. Glue all parts according to the photo. The ends of the “branches” can be decorated with cylinders of a different color, similar to Christmas tree decorations.

Vytynanka

I remember my sister once mentioned that she liked the so-called vytynanki - one of the types of Slavic folk art in which amazingly beautiful things are cut out of paper. They are often glued to glass to enhance the festive atmosphere.

And they are made like this: the desired pattern is drawn on paper in advance. In this case, a spruce tree folded in half. And then, using a well-sharpened stationery knife, all unnecessary parts are cut out. For the spruce you will need two parts folded in half, which can later be sewn in the center using a sewing machine or by hand.

Corrugated paper

Continuing the paper theme, I want to show you three simple Christmas trees. The first one, with blue roses, which are made of tissue paper (like corrugated paper, but much thinner). Each rose is created using a strip that is tightly curled at the center and slightly looser towards the end. Thanks to the properties of paper, roses easily straighten and become lush.

The base is again a cone.

The next spruce tree is very similar to the previous one, but here the strips used to create the flowers are cut along the edge, making them very fluffy. They are again rolled into a flower, but they do not try to give the appearance of a rose, but simply soak them as much as possible.

From cupcake tins

Well, that's an interesting idea. I have just a bunch of these molds that seem to never be useful to me (I would rather buy silicone ones). Cut the bottom off each and cut from one edge. And stick it on a paper cone.

By the way, you can use scraps to make a flat Christmas tree for a postcard, as in the photo in the master class.

Fabric Christmas trees

Floral

This beauty will require a lot of circle flowers. For them, cut out several circles of fabric and burn the edges. It is better to take organza, veil or something similar. Then collect each flower on a string and decorate the center.

Spruce again from a paper cone at the base

From felt

To create these tree pendants, use soft (for the base) and thick (for other elements) felt and beads. Patterns can be made directly from the photo. All that remains is to cut out the parts from felt, which then need to be sewn with a running stitch and stuffed. Well, decorate, of course

You can give such a Christmas tree to a guy - it will be very touching

From satin ribbon

Prepare beads, satin or grosgrain ribbon (or maybe even lace?), thread and needle. All you need to do is string beads and ribbon loops onto the thread alternately. The main thing is not to forget to secure it at the beginning and end of the product.

From balls

The essence of creating this wonderful Christmas tree is to create a huge number of fabric balls. For each of them, cut out circles and tie them with thread, laying a running stitch. Put a little padding polyester inside and pull it off. Each such ball must be glued to the base.

The base can be a foam cone, a paper cone, or sewn from fabric. You can also decorate the spruce tree in the form of a topiary; for this you will also need a pot of polymer clay and sprinkles to create the effect of an earthen mound.

I came up with such a charm in a nautical style:

Other materials or need for invention is cunning

Sorry, dear readers, I in no way want to offend anyone. It’s just that this expression best describes the impossibly diverse number of materials with which people manage to create Christmas trees :))

From beads

A rather complicated, but interesting Christmas tree. To create it, prepare chopped beads, a couple of beads and thin wire for working with beads. First, string the top, as in photo 1. Then make four upper legs - this will be the top.

Now prepare the branches, in each of which make several loops - smaller for the upper branches, larger for the lower ones. Collect them all into one trunk, wrapping it across with thin wire.

From plastic bottles

I respect this master class for its respect for nature and waste recycling. Take a plastic bottle, cut off its smooth central part, which you cut into fringe. The lid will go on the top, the bottom can be used as a supply. Glue all the cut elements to the central rod.

From spools of thread

My friends, if you have a number of wooden thread spools, then know that you are the owner of a treasure with which you can make an amazing tree. To do this, clear all the spools of thread and glue the very bottom row onto a round dense base. Then glue row by row onto the existing ones below. Simple and stylish

From candy

The base will again be a paper cone. Attach a row of regular tinsel to it, then a row of sweets, then again tinsel, etc. You can glue the most delicious candy to the top (as a star). One minus - there will be nothing left of the tree quickly

From the bark

Strict Nordic Christmas trees. Which can be made if you have a paper cone and a little (okay, a little more than a little) bark on hand. The pieces need to be glued in rows so that the tree looks like a spruce.

I just ask that you don’t spoil living trees for this. Better look for something that has already been knocked down by a thunderstorm. By the way, the method with small pieces can also be used with CDs.

From sticks

Let's continue the theme of nature. This time we are decorating holiday boxes. Use chopsticks to lay out a semblance of a tree, which, in turn, decorate with threads, buttons and other decorative details.

From clothespins

I definitely need to make one like this for the New Year))) I have a dozen or two clothespins with hearts, it will be cool) In general, all you need is to build a rod with a stand. For example, a lid with a spoke. And put “branches” on the knitting needle. You can insert lollipops into the edges.

Bohemian

And we will make this spruce using feathers. The principle is the simplest - glue the feathers in rows from the bottom. By the way, feathers can be purchased in woven ones. But I don’t know what they used to paint it green. Maybe someone can tell me?

From wire

Build the frame like this: wrap three circles of wire around something round (cans, buckets, etc.), so that each next circle is smaller (or larger) than the previous one. Then take three pieces and use thin wire to tie them together at the top and in the same place on each circle.

All this can be wrapped in a beautiful garland. If you get creative, you can even hang a few Christmas tree decorations.

Made from mesh (and sisal)

Such a Christmas tree can be built in a few minutes. To do this, take a mesh or a sheet of sisal (read what it is). Place on a paper cone and wrap in several layers. Secure the top with a cord, wrapping it in a spiral around the spruce. Decorate with Christmas tree decorations.

And now is the time for the most minimalist Christmas trees, which will decorate the house and won’t take up much space.

Made from... Christmas balls

Here's a pun - a Christmas tree made of Christmas balls. Nevertheless, it looks great. For some reason I immediately imagined such a structure at some cool corporate event of a large company - it looks very status-worthy.

Making one is not at all difficult: take several dozen green (or whatever you want) balls and tie a thin thread or fishing line to each one. The most difficult thing is to measure the length correctly. Do this: Determine for yourself the required number of balls for each row and, based on this, estimate the length of the thread. The higher the ball, the shorter the thread.

Symbol

This is exactly what the next two coniferous trees can be called. The first is located on the wall and is made up of pieces of tinsel imitating fir branches. You can attach it with double-sided tape so that the ends do not stick out.

The second one was simply skillfully assembled with the help of many paintings, badges, souvenirs, etc., which were collected in the likeness of a spruce tree. Notice how some elements seem to imitate toys that are located on the tree. An interesting idea, by the way, for an original gift for February 14th - winter will still be in force, so a Christmas tree will be quite appropriate.

Well, dear readers, it’s time for me to say goodbye to you. The spruce hit parade is over, share your impressions: what inspired you, what you will take note of, etc. Be sure to tell your friends on social media. networks using the buttons below. Bye!

Sincerely, Anastasia Skoracheva

What New Year can be imagined without the main symbol - the Christmas tree. Green beauties are sold on every corner on the eve of the holiday. However, for such a holiday it is not necessary to buy a live spruce. Try making it yourself. Therefore, in this article we will talk about what you can use to make a Christmas tree for the New Year holiday. It is worth saying that you can create the main symbol of the New Year from completely different materials. And today we will tell you more about this.

Mini Christmas trees made from pine cones.

If your children love making crafts just like you, then they can also take part in creating such crafts. The next craft - a New Year tree consists of cones and plasticine. All your child needs is to learn how to roll small balls from plasticine. At the same time, you can use plasticine of the brightest shades for this purpose. You can use regular spools of thread as a base for the Christmas tree. But you must wrap them in foil. The cones are attached to the coil using super glue.

If you like the next Christmas tree, then take acrylic paints and paint the cone with it. Remember that it is wisest to use green paint here. In this case, the tips of the tree are painted white. Make a base for the Christmas tree from brown plasticine. Use a star for decoration.

The next craft is a little more difficult to make. Here it is worth using beads. Therefore, if your child is small, then monitor this process yourself. Glue the beads to the pine cone using a glue gun.

All of the above crafts made from pine cones can not only decorate your home. It will be a pleasure to present such Christmas trees as a gift to your loved one.

The next craft looks more voluminous. And to create it you will need several cones. You should use a thick cardboard cone as a base here. After which, the cone is covered with cones on all sides. In this work it is customary to use a cool gun. Once the glue has dried, cover the tree with large beads.

Simple tinsel trees.

If you read this article, you can learn how to make an artificial Christmas tree at home. Above we offered you ideas for Christmas trees that were made from pine cones. Now we suggest using tinsel for this job. Naturally, for such a craft you must purchase the tinsel itself. For Christmas trees, make cones from cardboard. Then, glue tinsel to them. In this case, the tinsel should be glued to the cone in a spiral. While working, arm yourself with a glue gun.

Christmas tree made of candies.

The next Christmas tree may turn out to be not only a beautiful decoration, but also a very nice gift. To make this craft, make a cone. Secure the candies to it with tape, and then wrap the Christmas tree with tinsel.

A simple and voluminous Christmas tree made of paper.

The next craft is also very easy to make. It can be an excellent decoration for a child's room during the New Year holidays. To make it, prepare:

  • thick green cardboard,
  • markers, glitter, paints,
  • scissors and glue,
  • scotch.

Progress:

  1. We bend a sheet of cardboard in half and use scissors to cut it along the fold.
  2. We put the two parts that you got together and bend them in half again.
  3. Opposite the fold, using a marker, draw half of the Christmas tree.
  4. Now cut along the drawn line. As a result, you will get 2 Christmas trees that will not differ in any way from each other.
  5. Using gentle movements, bend each tree in half. Mark the center.
  6. Next, make a cut on one of the trees. The cut should be long from the very apex to the midline. For another tree, the cut should be from bottom to middle.
  7. Now we connect the trees by inserting them into the resulting cuts.
  8. To make the tree more stable, use tape.
  9. That's all, now start decorating your Christmas tree. Use your imagination and available materials here.




And here is another version of the Christmas tree, which you can make in the same way from an old cardboard box.

Elegant Christmas tree made of paper.

If you want to know how to make a beautiful Christmas tree, then the next idea was created especially for you. For such a Christmas tree, prepare:

  • colored paper,
  • scotch,
  • glue and scissors.

The most difficult thing is to cut strips of colored paper, which must have the same length and width. In this case, each strip must be glued together with tape to form a loop. After which all the loops are glued to a strip of tape.

You should wrap a thick cardboard cone with similar garlands.

How to make a glowing Christmas tree.

If you decide to learn how to make a Christmas tree with your own hands, then you are on the right track. Above we have described some simple crafts. Now it’s time to engage in serious creativity in order to do something original.

For a creative Christmas tree, prepare:

  • Flower floristic sphere. For this case, we recommend buying more than one shade of green.
  • Scissors, PVA glue.
  • Thick cardboard for the cone.
  • Cellophane, pins, garland, floral wire.
  • Various decorations.

Progress:

  1. First, we make a cone from cardboard.
  2. Wrap the cone in cellophane.
  3. We dilute glue with water in a container.
  4. We cut the floral mesh into pieces and place each piece in a container with glue and water.
  5. Now glue the pieces onto the cone. In this case, the joints are glued again for reliability.
  6. Use pins to prevent your craft from coming apart at the seams.
  7. As a result, you have the first layer of the tree. Make the second layer in the same way. Remember that after gluing the second layer, the structure must dry well.
  8. If the glue is dry, remove your tree from the cone.
  9. A garland is placed inside the tree.
  10. Now simply decorate the Christmas tree as you wish.

Christmas tree made of threads.

If you want to have something unusual in your home for the New Year, then in addition to standard decorations, decorate your home with various New Year-themed crafts.

Creating your next Christmas tree is also quite easy to handle. Take a sheet of Whatman paper and make a cone out of it. Coat the cone with glue and begin wrapping it with green thread.

When the glue is dry, separate the cone from the paper.

Decorate the finished Christmas tree with various accessories. You also glue the decorations to the tree using glue.

Finally

Celebrate your New Year brightly! Make many different Christmas trees that can make the atmosphere in your home truly magical.

Summary: How to make a Christmas tree with your own hands. Original Christmas trees made of pine cones and tinsel. Photos and templates of paper Christmas trees. Homemade origami Christmas tree. Christmas tree made of candies.

Even kids can take part in preparing for the New Year and making New Year's crafts with their own hands. For example, even a two-year-old can make a Christmas tree from an ordinary pine cone and plasticine. You just need to teach him to roll plasticine balls of different colors and attach them to the pine cone. The base of the Christmas tree is a spool of thread wrapped in foil.

Here are more complex versions of Christmas trees made from pine cones. In the first case, the cone was painted green and white with acrylic paint. In the second version, the pine cone was decorated with beads.

You can make a Christmas tree like this with your own hands from a large number of cones. The basis for the Christmas tree is a cone made of thick paper or cardboard, which is then covered with cones on all sides using a glue gun. Decorate the finished Christmas tree with beads and large beads.

Another very simple homemade Christmas tree made from tinsel. You can make it in literally five minutes.

To do this, you need to make a cone out of cardboard and stick tinsel on it in a spiral.



Christmas tree made of candies. DIY candy tree. How to make a Christmas tree out of candy

If, before wrapping a cardboard cone with tinsel, you use tape to attach candies to the future Christmas tree, you will get a sweet Christmas tree made from candies. For a detailed New Year's master class on how to make a Christmas tree from candies, see the photo below or follow the link. When creating a Christmas tree from candies, it is convenient to use double-sided tape.

A large number of Christmas trees can be made with your own hands from paper. Let's start with the simplest New Year's crafts.

DIY paper Christmas trees

DIY Christmas tree made of paper (option 1)


Print on thick paper or cardboard and cut out the blanks with scissors >>>> Bend each Christmas tree in half and glue them together. This Christmas tree is made according to the same principle as the Christmas tree ball from our previous article. See link >>>>

The openwork Christmas trees from the website Country of Masters are made using the same principle.


The Singapore website of Epson offers ready-made templates for its Christmas trees:



DIY Christmas tree toy (option 2)

If you have an unnecessary cardboard box, then you can use the same technology to make a Christmas tree like this.


DIY Christmas tree toy (option 4)

Or you can make a curly Christmas tree by gluing a cardboard cone base with strips of rolled paper.


DIY Christmas trees made of paper (option 10)

To make such a Christmas tree, you must first cut out circles of different diameters from paper. You will also need wire and a stand, which can be successfully replaced by half of a large Kinder Surprise. The Christmas tree is easily assembled with wire, and, most importantly, it is easily disassembled. See link >>>>


Origami Christmas tree from a magazine

This origami Christmas tree is very easy to make with your own hands. Small format magazines that can be found in any home are suitable materials.


Work plan:

The procedure described below must be done with each page in the magazine. If the cover is thick, you can simply detach it (tear it off).

1. Fold the page, upper right corner, at an angle of 45 degrees to you.


2. Once again fold the sheet in half diagonally.


3. We go through all fold lines with a fingernail or other object so that they do not open, especially thick pages.

4. Fold the bottom corner that extends beyond the borders of the magazine upward.


In this way we add up all the pages in the advertising magazine.


The result will be a cute origami Christmas tree.


Origami Christmas tree from a magazine

Another origami Christmas tree model for the New Year. Unlike the previous origami Christmas tree from the magazine, the pages here are not folded, but figuratively cut out according to a template.

The manufacturing principle is very simple. You need to prepare a template for half of the Christmas tree, circle it on one page and cut it out. Further, the cut out page will itself serve as a template for other pages. You can cut out several pages at once, but you shouldn’t cut a lot at once, as the cut line will turn out uneven (crushed) and the tree will not open well.


The tree itself turns out to be more one-sided; to achieve volume, you can fold and glue 2-3 magazines together. But believe me, she looks good anyway.

Origami Christmas tree made of modules. Modular origami Christmas tree

Assembling a Christmas tree from triangular origami modules is not at all difficult. It consists of individual branches, so you can make Christmas trees of a wide variety of shapes and sizes. In addition, from such branches you can make New Year's compositions, make toys, snowflakes, and stars. See the New Year's master class at the link >>>>

Christmas tree-coloring on the wall

Large Christmas tree painted on the wall. The individual parts of this New Year's beauty must be printed on 22 A4 sheets and pasted on the wall in the correct sequence. The advantage of this New Year's paper craft is that the Christmas tree is made in black and white, so the printer's ink consumption is low. In addition, this New Year's coloring book with many small details will captivate the child for a long time. Link >>>>

DIY napkin tree

A master class on making a very beautiful, unusual Christmas tree from napkins can be found at the link >>>>

How to make Christmas trees from corrugated paper

The Country of Masters website invites you to make two Christmas trees with your own hands from corrugated paper.

Option 1. The candles and the Christmas tree itself are made of corrugated tubes. Link >>>>

Hello, dear readers! On New Year's Eve, an incredible amount of all kinds of New Year's decorations appear on store shelves: Christmas tree decorations, tinsel, rain, bright garlands, firecrackers, artificial and live Christmas trees, etc. Speaking of Christmas trees, nowadays manufacturers offer consumers a really wide selection of Christmas trees: tall, small, tabletop, floor, lush, elegant, white, green, multi-colored... From which we can conclude that anyone can easily choose exactly the right model of Christmas tree, which, in his opinion, will most successfully fit into the interior of a house or apartment. But today’s article is not dedicated to factory-made, stamped Christmas trees, but to exclusive Christmas trees made with your own hands!

DIY Christmas trees.

To make a decorative Christmas tree, you can safely use almost any material: rhinestones, Christmas tree balls, threads, beads, wine corks, coffee and other grains, paper, buttons, wire, cones, tree leaves, feathers, pieces of fabric, ribbons, pasta and much more!

We have decided on the materials, but how to form the basis of the future Christmas tree? You can do this in the following ways:

  1. Select a cone-shaped bottle onto which to subsequently glue the necessary parts.

2. Buy a ready-made foam cone - sold in the “Everything for creativity and handicraft” departments.

3. Make it from a sheet of paper.

Let's look at the last point in a little more detail...

First way: We take a sheet of whatman paper, draw a circle, cut it out, then on this circle we mark a sector in the form of a triangle with a pencil, cut it off, and from the remaining part we form a cone, gluing the side part with tape or glue.

Second way: take whatman paper, draw a circle, measure out the fourth part of the circle - a triangle (see photo), cut out this part and form a cone.

So, having selected or made the most suitable cone, we proceed directly to the decorative part...

DIY Christmas tree ideas.

Paper Christmas trees.

We select paper of a suitable shade, cut out and form a cone (described above), decorate with rhinestones, foil stars, beads, seed beads or ribbons.

DIY Christmas trees photo

Coffee trees.

We prepare a cone from thick paper, after which, using super glue, we successively fill in all the gaps on the cone; as an addition, you can use grains of rice, seeds, acorn caps, rhinestones, beads or seed beads.

DIY Christmas trees photo

DIY decorative Christmas trees made from pasta.

We select shaped pasta, for example, bows, paint them in a suitable color from a spray can, and after the paint has dried, fix them on a cone (preferably dense foam) using instant glue. At the final stage, the Christmas tree can be supplemented with star-shaped pasta or small decorative bows.

Christmas trees made of threads.

We form a cone out of paper, take thick woolen threads that match the shade, cover the surface of the cone with PVA glue, and wrap it tightly with threads. Such Christmas trees can be complemented with bows, beads or rhinestones.

Christmas trees made from wine corks.

We form a Christmas tree from wine corks, gluing the corks to each other with super glue.

DIY Christmas trees photo

DIY Christmas trees made from buttons.

We prepare a large number of buttons; if you want the buttons to be the same in tone, first paint them using a spray can. We form a cone from thick paper and completely cover it with buttons; buttons can be glued in several layers.


Christmas tree made of cones.

We form the entire Christmas tree out of cones... starting by gluing the cones to each other from the inner circle, and finally placing the resulting tree in a pot or securing it to an improvised decorative leg made from branches.

Christmas tree decorated with sparkles.

We form a cone out of paper, finely chop the rain and tinsel, mix thoroughly, cover the cone with PVA glue and completely sprinkle with chopped glitter. Finally, we cover the top of the Christmas tree with PVA glue so that the shiny elements do not fall off.

Christmas tree made of wire.

We take a cone made of foam plastic and from top to bottom in the form of a spiral, cover it with dense wire. The result is a very stylish spring tree.

Feather Christmas tree.

We purchase small feathers in the “Everything for Creativity” departments, make a cone out of paper, and start from the bottom up, tightly joining each other, gluing the weightless feathers onto the transparent “Moment” glue.

Christmas tree made of dry leaves.

We take dry leaves or bay leaves harvested from the fall and glue them to a previously created paper cone; it is better to form a “crown” from top to bottom, gluing the leaves under each other.

The original beautiful Christmas tree will decorate the festive interior. Of course, you can’t dance around her, but such a miracle will definitely lift your spirits. This interesting tabletop craft can be made from the simplest things that are found in every home.

Necessary materials:

  • A4 sheet, cardboard;
  • dense threads (preferably wool mixture);
  • 2 “yolks” from kinders;
  • wooden sushi sticks;
  • plasticine;
  • Styrofoam;
  • stationery knife;
  • stroke corrector;
  • red nail polish;
  • PVA glue;
  • fabric scraps;
  • little things for decoration.

Make the frame of the future Christmas tree from A4 sheet - roll it into a ball. Insert foam inside.

Apply glue to the surface of the cone in thin strips and wind a thread around it.

Secure the end of the thread with glue.

Sushi chopsticks will serve as legs for our beauty. To do this, they need to be painted with a corrector.

While they are drying, make boots from the “yolks”, as shown in the photo.

Fill them halfway with plasticine and wrap them in cloth.

Insert the stick legs into the boots, decorate the Christmas tree with various bows and ribbons. Paint stripes of legs with red varnish. ready!

You can make a hat out of cardboard, cover it with fabric and sew on a pompom.

DIY shabby chic style Christmas tree

Let's make such an amazingly beautiful and original craft in the fashionable shabby chic style.

Necessary materials.

For the base, take a large paper glass or any plastic container. Separately, dilute alabaster or gypsum with water to the thickness of liquid sour cream and pour it into the future pot. We secure the trunk of our tree, plant the branch in the center and fix it in this position until it hardens.

We make a cone out of cardboard using a stapler.

We make the top of the spruce from wire and foam rubber.

We connect the top to the trunk and attach the cone.

We wrap the base of the tree with white fur.

We cut off the excess from below.

Then we bend the ends of the burlap inward and attach it with hot glue.

Let's get to the fun part - decorating our Christmas tree in shabby chic style.

To create the finished composition we will need a stand.

We make a bench from a bamboo napkin.

From white fur - a snowman.

We attach a bell to the top of the spruce.

We decorate the New Year tree with beads, pearls, flowers, lace, etc.

Apply transparent glue to the very top of the tree.

And sprinkle with artificial snow.

We do the same with the bench.

Our composition “Winter's Tale” is ready!

Decorative Christmas tree made from napkins

We will make it from cardboard and single-layer napkins. You will also need beads for decoration.

First of all, let's build a frame for our Christmas tree. We roll a cone out of cardboard, fasten it (I stitched it with thread) and cut off the bottom of the cone exactly so that it can stand.

The base is ready, put it aside for now. Now let's move on to napkins. We will make roses from them. Single-layer plain paper napkins are suitable for us.

Take a napkin and cut it along the folds. Then we fold it in three and cut along the folds again.

We fold the resulting strips in three and cut them again. We got a square equal to 1/9 of a napkin.

We fasten this square in the center with a stapler.

Then cut a circle out of it. Mega-precision and accuracy are not required here at all; the finished rose can be slightly adjusted with scissors.

This way a rose is formed. If the finished rose seems uneven to you, you can trim it with scissors.

The number of such flowers depends on the size of your cardboard cone. My Christmas tree was 21cm high and I needed 59 roses for it.

When all the flowers are ready, we return to the cone. Starting from the top of the head, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but ordinary PVA will do.

I made a Christmas tree out of napkins of two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with alternating them on a cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only the lower layer of the flower will be damaged. We simply tear it off (the bottom layer). The rosette will not lose its appearance.

So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.

I also decorated it with beads - I glued it with the same hot glue, PVA won’t help here.

DIY decorative Christmas tree made from napkins

As you can see, even a beginner can make such beauty, so you can safely involve children in the process.

Another option for a Christmas tree made from napkins

Crafts made from cones, balls, ribbons and beads

How to make such a craft - watch the video tutorial at the end of the article.

Christmas tree made of plasticine with candies

What do we all associate with the wonderful New Year holiday? With the smell of pine needles, bright lights, garlands, sweets. And children also create unusual crafts with their own hands, thereby bringing the pleasant moment of a fabulous night closer. They love creativity lessons on this topic most of all. It is in crafts that you can realize any fantasies.

We suggest making an elegant Christmas tree that can be easily decorated with candies. Make a craft from plasticine - the cheapest and most popular material. You will definitely make a beautiful souvenir if you follow our tips - they are not complicated.

To sculpt a Christmas tree with your own hands, prepare:

  • green plasticine for the crown;
  • stump in the form of a cap or an empty spool of thread;
  • toothpick, red and white plasticine for candy.

Select a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small candies as toys. Of course, a small souvenir does not have to be green; another color that you choose will do. If you manage to find a set on sale that contains a gold bar, then this option will look rich.

Knead the entire prepared block thoroughly in your hands and prepare for further work. It is necessary to form a cone-shaped crown, and not quite the usual flat one, but a curved one, similar to the cap of a fairy-tale gnome. Since we are talking about a magical holiday, it is not forbidden to fantasize and create something incredible.

Pull all the soft plasticine into a long cone. Make the upper part as sharp as possible, press the lower part around the circumference with your fingers, showing the skirt. Then take and bend the entire structure to the side. Sometimes the Christmas trees do not stretch up perfectly straight, but lean to the side like this.

To model Christmas tree decorations - small candies - use white and red plasticine. Form red round tablets (the inner part of the candy), as well as white triangles (the twisted part of the candy wrappers).

Glue delicious candies together. Glue a white dot onto each red round piece and press it in the center with a toothpick. Glue the triangular pieces on the sides.

Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing the candies around the circumference at some distance.

Glue all the resulting blanks to the crown. This beautiful New Year's craft is almost ready. Press down a small lid - a stump - from below (or mold it from plasticine).

And the top is still missing. She just begs to be added to the resulting fairytale Christmas tree. Come up with some option, for example the same spruce branches in combination with red berries. All this looks festive and bright.

This is such a fantastic Christmas tree. This is an elegant version of a craft for the New Year, which will be an excellent gift for your favorite holiday.

The New Year is just around the corner - you need to hurry up to get everything done.

How to make a card like this.

DIY felt Christmas tree

Let's make Christmas trees from felt - this is an excellent New Year's decoration and perfect for school or kindergarten.

Prepare for them:

  • Set of colored felt;
  • cotton wool;
  • glue "Moment" transparent;
  • any beads;
  • threads for knitting and sewing;
  • a needle;
  • scissors;
  • felt-tip pen.

Choose appropriate felt colors. These can be different shades of green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together and draw the shape of a fir tree on the top one.

Cut a piece of felt with a pattern along its entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.

Cut 4 blanks into shape.

To give them a bulge, put a little cotton wool, as shown in the photo.

Lubricate the edges of the workpiece with glue.

Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. It can be hung from it. Attach the second piece and press along the edge so that both parts stick together.

On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.

Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and place beads on it.

Now let your little one decorate them however he or she wishes. After drying, the craft is ready for use.

This simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older children will be able to do it completely on their own. Using this principle, you can make any felt decorations. Whatever your imagination suggests.

From natural materials with flowers from foamiran, do-it-yourself video lesson

Christmas tree sachet - to create a festive aroma

A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a clothes closet or chest of drawers. If you place such fragrant bags on shelves with things, a pleasant and subtle smell will settle in your closet.

Making such a sachet with your own hands will not be difficult, and if you create it in the form of a New Year tree, then in addition to the aroma, the festive composition will also set the appropriate mood.

Materials for the master class:

  • Citrus peel;
  • orange essential oil;
  • threads, needle;
  • beads, beads, sequins;
  • satin ribbon;
  • green cotton fabric;
  • scissors and pencil.

Draw a spruce template on a piece of paper and cut it out.

Finely chop the citrus peel, and to add a greater aroma, you can also add a few drops of essential oil.

From thin green cotton fabric, cut out two blanks according to the template, fold them with their right sides inward and baste.

If possible, sew and finish the edge on a sewing machine; if this is not possible, process the edges by hand.

Turn out.

Make a loop from a silver thread with a voluminous knot at the end, using a needle or hook, thread the loop into the top of the spruce.

Tie a satin ribbon into a bow and secure it at the top with a couple of stitches.

We fill the craft with aromatic citrus peels and sew up the edge.

If desired, you can decorate the sachet tree with your own hands with various beads and sequins.

Our affordable and easy-to-make sachet is ready, now its aroma will delight you, and its beautiful appearance will give you extraordinary and festive energy.

Photo of Christmas tree sachet with orange scent

Christmas tree toy made from pasta