How to erase the blue handle. Than laundering a blots from ink from furniture, hands, clothes, laminate, plastic, toys

15.09.2019

Read the following articles:

You can take a new sharp razor (blade) and try not to erase, but cut off an unnecessary inscription. To be confident as a result, try to do it first on an unnecessary document, having pre-trigger. It is necessary to cut, slightly bent the blade and not making great effort. Also, with the help of the blade, you can try to scrape unnecessary stools.

One of the sites is the following way to get rid of ink on paper. Prepare the "home solvent" for the preparation of the solvent we will need: vinegar 70%, mangartee, hydrogen peroxide.
We take 30 grams of vinegar table 70% (for sale in grocery stores), add a manganese (you can buy in pharmacies) to dark purple and thoroughly stir. The resulting liquid is neatly applied to the inscription with a cotton wand (attention is not rubbed on paper, but simply apply a wand moistened in the liquid), then we are waiting for several tens of seconds. After that we take a hydrogen peroxide, (also sold in the pharmacy) watches the Vatka and neatly miss the pink divorces, which remained from the embroidery. According to the author's experience of this Council - there should be no trace from the inscription!

Another similar way:

For the manufacture of a liquid, acetic concentrate is taken 70% (about 1 h. Such) and a small amount of manganese in crystalline form (at the knife tip). Everything is mixed, liquid is ready for use. Under the sheet from which you want to remove something, put, clean, white sheet of paper. You take a tassel, (how it is softer and thinner her hair, the better) dip it into the cooked liquid and start spending this tassel on the inscription until it disappears. In this place, the paper acquires a brownish shade, remove it with a piece of cotton wool moistened in hydrogen peroxide (all components are sold in a pharmacy). Then, the section of the moistened sheet is needed to try to heat the warm iron. For this, soft matter is littered, it is clean, a clean, white sheet of paper, and the sheet from which the inscription was removed and stroked the iron (the surface of the iron should be clean, if there are black spots, then on the wet leaf there are pure white sheet and stroke) .
Note: This way the inscription is deleted better from thin sheets, to remove with thick dense sheets it is advisable to use the sharpened match instead of a brush. A small piece of cotton wool is wound on the honest tip (there are several tiles of such tassels. They quickly fail) wet them in liquid and neatly a progressive-returned movement on the inscriptions will be reduced.
Everything else is performed similarly.

Here is a couple of recipes:

Sodium sulfite or any other substance containing SO3 ion, it is necessary to mix with water. The gas released with a sharp unpleasant odor returns the leaf of the pristine whiteness.

Ink stains can be removed with a mixture of glycerin and ethyl alcohol (in equal proportions).
Fresh ink stain easily excreted with warm pair milk or spokeshaw.

I still advise you to pre-test the chosen way to get rid of the inscription first on an unnecessary paper surface.

How to remove ink with paper without traces at home: 18 ways

How to erase a paper handle without leaving traces? 10 effective ways, video

What is written in pen - you can't cut down the ax. The diversity of modern means can argue with a winged expression on whether it is possible to tear or erase the paper handle.

In fact, the situation in which the deletion of ink is needed can be the most diverse, they can also be attributed to schoolchildren with students, when only one appearance is capable of changing all the multi-day work. And even the secretaries of firms, often in the hurry of the components of the documentation.

So what way and with what you can carefully remove the paper handle to make certain changes in the corrupted document?

The modern market offers a wide variety of ways, often publicly available. It is possible to attribute acetone with absolute confidence to the most relevant means, hydrogen peroxide, various mixtures based on ethyl alcohol, salt, soda, manganese and some others. But first things first.

How to remove ink traces with acetone?

Such a powerful solvent as acetone is able to cope with many types of pollution, no exception and track from the handle.

But it is not necessary to apply it in its pure form, as it will not be possible to control the situation, and he simply has a tanner not only ink, but also a sheet of paper itself.

It is best to use an ordinary acetone-containing liquid for removing nail polish.

The meaning is that the composition of the fluid provides for a gentle amount of the necessary tool, which will help cope with the problem and harm the material.

This tool is publicly available and perfectly suitable for solving the problem in the most conditions, even at least at least in the office, at least at the lecture.

It is necessary to apply it:

slowly and in small quantities, through cotton sticks, pipettes or toothpicks apply to a contaminated area;
using a cotton swab or a soft napkin, gently flush in a vertical position so as not to smear;
if it is necessary to purify the entire sheet, it is immersed in liquid completely and then sucked in the ventilated room;
in case of incomplete cleansing, the procedure should be repeated.

Hydrogen peroxide as an optimal paper cleaning tool

The latitude of hydrogen peroxide is not limited to the destruction of bacteria and hair discoloration. Its applied to its use and in the field of extinguishing ink spots.

To the place that needs to be cleaned, by means of a cotton wand or a dense cotton swab is applied with a small layer of 20% of the means, then with a napkin, which absorbs and the peroxide, and ink, the surface is dried.

Excessive devices that are able to harm the canvas are not needed; Delicate appeal and maximum concentration can bring much more use than diligent and energetic friction.

To remove the traces of the paper handle seems possible and a balanced mixture from the same hydrogen peroxide, ordinary manganese and, to choose from, table vinegar or acetic essence.

Potassium permanganate, hydrogen vinegar and peroxide - a rattling mixture to combat ink

In the procedure for removing ink, it should be considered extremely close to the ingredients, since with careless circulation, not only the document that requires treatment is required, but also yourself.

The preparation method lies in mixing in a glassware of a pinch of manganese and a small share of acetic essence. As soon as the liquid acquires a clear grenade tint after thorough mixing, it is applied with a cotton stick on a problem area.

It can be applied to the solution without fear that the liquid falls on the nearest areas, because the further procedure in which hydrogen peroxide is useful will eliminate all visible flaws.

After applying, it is necessary to wait 2 seconds and apply a hydrogen peroxide on the same place, which will save not only from traces from paper, but also from bright red brand stains.

To maximize the purity of the procedure, the wet sheet is recommended to try through the absorbent napkin. In this case, the surface will not only be as clean as possible, but also smooth, which is also important.

Liquidation of traces with paper with ethyl alcohol

Ingredients such as ethyl alcohol and glycerin are taken as the next means.

In equal shares, they must be mixed, and then apply to the cleaned area. When conducting this procedure, it is not recommended to go beyond the boundaries of the hand drawn track.

The composition of 200 grams of ethyl alcohol, 10 grams of conventional soda and 100 grams of water is considered no less relevant mixture on the basis of alcohol.

A similar means are treated as much as it requires for a complete disappearance.

Any tools require sometimes exceptional care and caution, and the actions often do not always have favorably affect the skin.

Therefore, caution can be the most important point, for example, especially since other methods are available, where the active ingredients are chemical elements.

Other funds that are able to bring the handle

Withdraw a paper handle capable and other methods.

Equal amounts of lemon and oxalic acid (10 grams) are dissolved in half a glass of water. After processing, the surface is purified by conventional water and dried.
Household chemicals will help, such as public whiteness. Due to the existing chlorine, it will help to remove any inscription without visible damage.
No less relevant is the sparing wetting with white vinegar. Wash such a substance stands exclusively to the dishwashing agent, so accuracy is the first definition moment.
As another accessible way, the paper is considered lacquer for hair.
If the layer of a spoiled document is quite thick, then you can clean and with the help of a conventional toothpaste and, accordingly, a toothbrush.
As a non-standard approach, helps withdraw the paper handle, the sun can be used. To do this, it is necessary to suspend the contaminated sheet under the right sunlight. Under the influence of ultraviolet ink, they quickly disappear quickly, leaving after themselves only small dents that can be asked the usual iron.

Any inscription made on any carrier can always be erased by a variety of ways.

Source: http://adella.ru/home/clinging/kak-udalit-sledy-uchki-s-bumagi.html

How to erase a pen with paper without traces: Methods for gloss, cardboard, thin and dense sheets + reviews

Even in a computerized eyelid, the need to remove ink from paper sometimes occurs: school works, reports and other important documents with a "live signature", according to the law of meanness, it is not always possible to do without blots. And when removing there is no strength and desire, you can resort to simple tricks to remove the annoying champs without a trace.

In order not to damage the paper, do not turn a small interview in a large klyaks and do not harm the health, when removing the paste need to follow the four rules.

Try before applying. The ink removal means should be previously tested. Best of all - on a sheet of the same paper, as a last resort - on the reverse side.
Select a convenient tool. If you need to clean a small piece of paper from ink, the composition is applied with a cotton wand, toothpick, thin watercolor brush, pipette or syringe.
Act neat. Do not use the "rolled" wool. Having peeling hairs can smear the stain even more, and remove them problematic. Do not rub the paper strongly so as not to damage the sheet.
Observe safety. When using flammable means, clean the paper away from light sources. If dangerous substances are used to work in a well-ventilated room. It is advisable to wear safety glasses and work in rubber gloves. The sheets treated with aggressive substances are dry in an inaccessible place for children.

Paper handle can be erased by using stationery purchased in the store.

Eraser for automobiles. Elastic, specially designed to remove ink. Often, after using such a "adaptation" on paper, dirty spots remain, and if we rub especially diligently - holes.
Corrective tape. A device that allows you to stick on an incorrectly written letter, a whole word or offer a white narrow tape.
Corrector. A past-shaped white composition that makes a mistake. Sold in small tanks with a tassel, as well as in the shape of a handle.

After applying store products, traces remain on paper. In some cases, this is acceptable, for example, if the beauty salon administrator wants to correct the time in the journal visits. However, sometimes it is necessary to remove ink from documents without a trace. Popular funds will help.

Blow ink with white background

Display ink from a white paper sheet without distinguishing the easiest: you can use clarifying formulations. At home, products that are always used at hand are usually applied.

Features. This method is suitable for cleansing large areas: apply the composition for one letter or the figure is quite difficult.

How to act

A small amount of soda mix with water to the state of the paste.
The composition gently apply to ink.
Wait until the pasta is driving.
Make soda.

Lemon juice

Features. Instead of the juice of sour fruit, a strong solution of citric acid will be used. The method should not be used on fine paper, since the "lemon" can damage its structure.

How to act

A small amount of juice fill the syringe or pipette.
Drop on a stain.
Loose clean napkin.

Features. For thin paper it is desirable to use vinegar mixed in equal proportions with water.

How to act

Apply to ink vinegar.
Wait ten minutes.
Inhabit a cotton disk with dishwashing tools, blot stain.
Remove remnants with a napkin.

Features. This method will help you imperceptibly remove the gel handle with paper.

How to act

Heat a little vinegar to 50 ° C.
Drop means on a stain.
Wipe the treated area with a wet wadded disc.
Loose clean napkin.

Features. The tool is suitable for removing blue, black, green and red paste, as well as traces of gel handle.

How to act

Add multiple crystals to a teaspoon of vinegar (on the knife tip).
The composition is applied to colored ink.
Remove the resulting brown stain with a cotton disk, moistened with hydrogen peroxide.
Throw a sheet with iron, covering clean paper.

"White"

Features. The use of means is contraindicated for too thin paper.

How to act

Apply on ink.
Wait 20 minutes.
Wet the purified area with a wet disk or sponge moistened in water.
Restore through a clean napkin.

Acetone

Features. To remove ink, acetone is not recommended in pure form, especially on thin paper: an aggressive substance may damage its structure. It is better to take a liquid for removing a varnish containing the substance. As part of the funds should not be dyes.

How to act

Apply to the stain acetone.
Loose with a cotton wand, a disk or dry napkin.
If you need to clean the entire sheet, completely immerse the paper into the tool.
Seeing a sheet by placing it between paper napkins or towels.

Instead of acetone, you can take hydrogen peroxide or hydroperite solution (four tablets on 50 ml of water).

Features. Instead of procubosses, you can use pair milk, the bleaching effect will be the same.

How to act

Fine brush apply to blot.
Wait for drying - ink will be discouraged.

Toothpaste

Features. It is impossible to use gel toothpastes and compositions with dyes. Similarly, a white shaving foam is used.

How to act

Apply a paste on ink.
Wipe with a toothbrush. To enhance the effect of the bristle, you can dip in the food soda.
Wet with plenty of water.
Dry paper, swallowing a warm iron through a blank sheet.

Ethanol

Features. The method will help to quickly drop the handle with a thin paper without damaging it.

How to act

Dilute 10 g of food soda in 200 ml of ethyl alcohol. Pour half a glass of water into the mixture.
Gently apply the composition on ink.
Wait five to ten minutes, flush with a clean napkin.

Hydrochloric acid

Features. Working with hydrochloric acid requires special caution: an aggressive substance can damage the skin and mucous membranes.

How to act

Dissolve two teaspoons of salt in 30 ml of water, add 10 ml of hydrochloric acid.
Apply to ink.
Wet wet disk.
Dry on draft.

"Triple" action

Features. Gently remove the paste from the ballpoint handles from paper, using the three active components at once: soda, salt, lemon juice.

How to act

Mix soda and salt in identical ratios.
Apply a mixture on the cleaned area and pick up using any flat object instead of the press.
15-20 minutes to drop on the composition of a bit of lemon juice.
Wait for complete drying, brush out the remains of soda and salt.

If the child decides to fix this way in the diary, detect the traces of "crime" will not succeed.

Features. This method is not suitable for too thin paper.

How to act

Prepare composition: one part of acids (oxal and lemon, mixed in equal proportions) and ten parts of water.
Apply in several layers
Mocked with water.
Loose with a dry cloth.

Removal of "Klyax" on the gloss

With smooth glossy paper, the ink is very simple, especially if the sheet is white.

Alcohol-containing liquid

Features. To remove ink, both medical alcohol, and any alcohol-containing liquid without dyes.

How to act

Moisten a cat with alcohol.
Carefully erased the inscription with glossy paper made by handle.
Wipe with a dry cotton disc or napkin.

Even easier, when removing stains, use the alcohol napkin, which the doctors are used for disinfection.

Eraser

Features. To remove ink with glossy paper, an eraser for automobiles is suitable for the automotive panels, and the usual "washing" for pencils.

How to act

Carefully erase ink eraser.
With a dry napkin to brush the "katovka".

Glycerol

Features. Remove the stain from the handle with colored paper is more complicated. Another task is added - to avoid the appearance of a clarified area on the painted sheet.

How to act

Mix in equal volumes ethyl alcohol and glycerin.
Apply the composition only on the ink you want to delete.
After disappearance, the stains get into the purified area with a wet cotton disk.
Dry sheet, if necessary to try.

Mechanical methods for cleansing cardboard

It is possible to remove the ink mechanically, however, staining together with the top layer of paper: the roughness on the sheet will remain forever. That is why it is possible to resort to the following methods to the following methods only if the paper is dense.

Blade

Features. When using a razor, it is necessary to observe special care so as not to cut down.

How to act

Locating the blade perpendicular to paper, carefully scrape unnecessary ink.
Put the razor on the purified portion of the glossy surface and polish.

Sandpaper

Features. You should use fine-grained sandpaper, "zero".

How to act

A small piece of sandwich with a double-sided adhesive stick to the stupid end of any pencil.
Carefully erase the extra ink, not pressed much.
Flush "side" particles.
Slide the surface of the paper nail.

Leucoplasty

Features. It is most convenient to use a narrow leucoplasty.

How to act

Stick a small piece of adhesive on the ink removed.
Gently rejuvenate - the ink will take off with the top layer of paper.

Elimination of unwanted consequences

Judging by the reviews, the removal of ink from paper does not always pass without a trace. In some cases, unwanted consequences can be eliminated.

Ink divorces. If, as a result of manipulations on paper, divorces were formed, it was possible to remove them moistened with a cotton disk in hydrogen peroxide.
Chances. If the paper is blocked, you need to cover it with a clean sheet, try to try the warm iron.

In the official documents (including in the employment record), the correction of errors using the corrector, rubbing and other methods is strictly prohibited. If the entry is made incorrectly, it is invalid, is adjusted in accordance with the legislation of the Russian Federation.

For those who know how to drop a paper handle, a small search, ink blots or a doodle baby in the reporting document is not a problem. However, in order not to turn a minor line into a large spot or hole, you need to carefully select a tool to remove the paste, comply with the recommendations.

Reviews: "The inscription has practically disappeared"

Actually, I once tried to bring the inscription in the school diary with couples of concentrated hydrochloric acid. The problem was that the paper in the diary is colored and she also brightened. And the inscription has practically disappeared.

Chiefsl, http://www.taxhelp.ru/forum/2/354113---.html

Simple ink Pts. We are well reduced by a simple chlorine bleach ("whiteness" was such): a toothpick or sharpened match, spent in the bleach gently spend on the inscription and it disappears. Verified personally 20 years ago. The task is not to smear the chlorine paper to yellow. To do this, it is necessary to select the concentration of the bleach.

Alexander Chashkin, https: // Forum. zakon.kz/topic/34372KAK.This-Chistelas-Comagi/

In childhood, my mother removed so. I took the blade from a dangerous razor and lightly raised the corner, and then there was a rubber band on this place. Only it is necessary to do soochly carefully - it would not do to the holes. And now they sell the washers that the handle is erased. They are blue or red and rigid, with absorbs of abrasive.

Nyuk, https://rostovmama.ru/forum/index.php?topic\u003d75684.0.

The ink of blue ballpoint handles is sufficient simply - in concentrated acetic acid is added potassium permanent to dark purple staining, this solution with a brush is neatly applied to the inscription.

The discoloration is made by another tassel dipped in a concentrated solution of hydrogen peroxide.

this way of traces I did not have left, but the paper was dense ... for lilac and black, it does not fit!

Alx, \u200b\u200bhttps://forumnov.com/index.php?showtopic\u003d210851

Source: https://domznatok.ru/uborka/sovety/kak-steret-ruchku-s-bumagi/

How to erase a pen with paper without traces?

Everyone came across such a problem as errors, typo during writing texts or in time to fill documents. Paper elarves a lot, but from such consequences, many want to get rid of.

To correct an error or typos on paper, you need to completely rewrite the text, but it is not always possible to implement it. After all, very sorry for spent time and effort. How to erase the paper handle?

For high-quality cleansing of a sheet of paper from ink, there will be appropriate means. For example, leucoplasty, hydrogen peroxide, blade, milk and so on. Remember that this is a job that requires a lot of patience.

Many say that there are no methods and means that would be easily erased ink with paper without traces. There is always a way out. This can be explained incorrectly selected tool that can only aggravate the situation.

To prevent this, it is important to consider the type of ink from which it is necessary to get rid of.

Varieties ink

Ink is a liquid consistency with coloring agents that can be different colors. The composition of ink pastes from different manufacturers is the same, but the quality is different.

Everyone came across such a problem, the code improper storage of the handle led to the flow of ink from the ampulus. This is especially true of first-graders who do not know how to use handles correctly.

Therefore, we consider some varieties of ink that affect the process of removal from paper:

The ink is viscous or even a thick consistency can only be found in feathers handles. When applied to the surface, it becomes matte. To withdraw this kind of ink is very hard, especially if a thin sheet of paper was used.
In the ballpoint handles, the ink is a lifting consistency, with a slight gloss. Such a product is the most popular. You can remove this type of ink.
Gele-shaped ink, the most common schoolchildren. Consist of gel-like pastes.
Capillary handles - Leave the fat ink trail on paper.

How to erase the gel pen with paper without traces?

Gel pens are famous popular among schoolchildren and lovers to paint with handles. They won great popularity unusually bright and unusual ink.

Dark colors can fill out documents, vivid emphasize, make a note. But if you made a mistake, it is required to be corrected. Therefore, the familiar peroxide of hydrogen and manganese will come to help. Mix the ingredients before receiving the casis.

Use a small amount of ingredients. The composition is applied carefully and only on the inscription. For a long time, it is not necessary to leave the tool so that the paper does not rays. The mixture is removed with a cotton sticks moistened in peroxide.

After manganese will remain a dark trail. It is removed by peroxide. Complete the process will help cotton wool, which is removed part of moisture from paper.

Attention! Before proceeding to remove ink with paper with various means, be sure to test the remedy for the "draft". In this way, you will not only be able to choose an effective tool, but also save yourself from another error. That is, do not finally spoil the paper on which important things are written.

How to erase a paper handle with priests?

The blade and eraser are the oldest and proven ways that our parents used. It will take a rectangular blade, those who were still shaved grandparents. It must be definitely new.

A corner that lightly march a mistake. Then on top of the paper it is recommended a little handle with an eraser. Movements must be neat and superficial.

Otherwise, the hole will appear.

After the blade, a roughness may appear on paper, which is recommended to remove something smooth.

The solution of manganese. Dilute in 1 tbsp. l. Vinegarian manganese, so that purple solution turned out. Gently moistened in the solution of the subject and point movements to the problem area. Remove the residues of the mixture will help hydrogen peroxide.
In order to remove a large number of inscriptions Take advantage of the toothpaste. It needs to be slowly and carefully launched into paper. Remain remnants to remove with water.

Chemical solutions for launching ink with paper

The bleach is a chemical agent that effectively struggles with stains of any complexity and on any surface. Paper is no exception. The area on which you want to remove the ink to apply bleach. As soon as the processed area snacks, there will be a white powder in its place, which is enough to shake the napkin.

Attention! Use chemicals needed away from children. Remember that a properly selected remedy will not wait long.

Acetone is a powerful solvent that is able to eliminate different types of pollution. Cosmetic species of acetone are designed to remove the lacquer from the nail plate, it is less caustic and safe than a real acetone. To remove ink, it is recommended to use a cosmetics. Pure acetone is mainly designed for production purposes, therefore, it is capable of damaging a paper canvas. Drip on the spot with a varnish removal, the residues flush the napkin. It is not recommended to use the usual wool, it can stay on paper.
Hydrogen peroxide - Antiseptic fluid, used to disinfect wounds, hair discoloration and spin removal. Apply a solution on a remote inscription. To do this, use a match that wrap your cotton or a piece of gauze. Processed stain drying with a paper napkin. The stain remover is absorbed into it together with ink. If the inscription did not disappear from the first time, you can repeat the procedure. Pay attention to the fact that if the sheet of paper has some kind of drawing, the peroxide will discoliate.
Instead of hydrogen peroxide, you can use hydrophyrait. Purchase remedy at the pharmacy. It will be necessary on 20 ml of water of only 2 tablets. Before mixing with water, the pills are crowned.
Glycerin-alcohol solution. Mix the ingredients in equal proportions. Apply only on the contour of the inscription.
Sodo alcohol solution. Mix 0.5 h. L. Soda in 50 grams of alcohol. To the resulting alcohol solution add 20 grams of water. This solution quickly removes the ink of the ballpoint handle.

How to erase colored ink with paper?

Mix 1 tbsp. l. Sorvenine and citric acid with 10 tbsp. l. water. The solution is applied with a thin pussy to the inscription. You can see how to dissolve ink.
Use chlorine bleach, that is, the usual whiteness. Tool apply on paper with a cotton wand. After chlorine discourages the ink processed area wipe with a wet cloth. Iron helps to dry the wet stain.

Attention! This method is suitable only for perfect white paper. Colored or patterned paper sheets chlorine discolored.

Salt against ink. Salt can remove fat stains from clothing, it is used in cosmetology, but no one knows that these white small crystals are able to dissolve ink. To prepare the solution will be needed 2 hours l. Salt and 3 tbsp. l. water. Mix well, add 10 ml of hydrochloric acid to the resulting salty water. The mixture is toxic, so do not allow its skin and mucous membrane. Apply salt liquid on a removable stain. How the inscription will dissolve, the treated area wipe with a wet sponge.

Vinegar liquid, which is used not only in cooking, but it is used to eliminate odors and stains. Apply on paper. After the ink is vinegar, you can rinse them with paper. To do this, use the detergent for washing dishes. All ingredients are at a minimum so that they do not connect the paper structure.

Mechanical ways to remove inscriptions

Not always, liquid means can effectively remove ink, as the divorce can remain. Therefore, we will get rid of ink mechanically.

To do this, you will need a medical leukoplaster on a white basis, mainly sold in the form of a roll. To qualitatively and quickly remove the inscription, it is necessary to cut out the inscription you want to remove from the leucoplasty. After achieving the required size and shape, stick it, press a bit and carefully fly away. You will see how a very thin top layer of paper will be removed with the leafoplasty with ink. The work is quite complicated and requires patience, but the result is worth these torments.
You can use fine-grained emery paper. With a certain skill, you can imperceptibly remove any small detail of the recording.
You can also withdraw ink with dairy products.For example, milk or sources. Dairy products are applied only on the contour of the inscription, while repeating all the bends. Filing, the inscription will gradually disappear.
If there is time and do not want to suffer, and resort to the use of chemicals,then use simple, but at the same time a non-standard way. This bleaching ink with light, namely the Sun.

Put the paper for a sunny place. Under the influence of sunlight, ink will gradually decide. If you need to delete a small amount of text, then close the remaining text with tight paper. The process is long.

When deleting ink with paper with chemicals, be sure to follow safety. Remember, health is more important than paper.

Barcode or special correction pencil is not the only ways to remove ink with paper, there is a lot of breeding agents that allow you to successfully cope with this task.

For cleaning, a 20% peroxide solution, cotton wands and paper napkins are required. The algorithm of action is not complicated and does not take much time:

the stain is punished with a cotton wand;
the peroxide together with the ink is cleaned with a napkin;
leaf leave to dry.

With vinegar

An efficient means will be a combination of peroxide with vinegar and a small amount of manganese. For the preparation of the solution will be required:

mix vinegar with manganese;
add from 10 to 20 drops of peroxide;
mix the components to a homogeneous state.

When the mixture is ready, it is necessary to rush to pour it ink, using a napkin to remove the solution together with the traces of contamination. Then, with a cotton disk, moistened in a weak solution of peroxide, remove the spots. To dry the peeled sheet, we deposit it with paper from above and below, stroking iron heated to the average temperature.

Medical alcohol with glycerin

This recipe makes it possible to remove the trail from the ballpoint handle with the paper completely, retaining the natural color of the sheet:

both components are mixed in equal proportions;
preheat when stirring, so that the mixture becomes liquid;
apply neatly, along the contour of the ink stain, with a toothbrush or cotton wand.

Accuracy is necessary due to the specific composition of glycerol, which can leave traces of processing.

Soda with alcohol

An effective combination of ink on paper will be a compound of medical alcohol with soda. This will require:

about 200 grams of alcohol;
water, half of the volume of alcohol;
about 10 grams of soda.

The solution is applied with a cotton waller, the stain treated stain must be stored with a paper towel, then the sheet is dried.

Acetone

The substance has a strong corrosive effect, so it is not recommended to use it in its pure form. For these purposes, liquids are better suited for removing acetone based lacquer. The discharge procedure is as follows:

a drop of fluid must be applied to the ink spot;
after a few minutes, the processing place must be stuffed with a paper napkin or a towel.

A small dash can be removed using toothpick, cotton wand or pipette.

This means is suitable for complete cleaning of the sheet from the inscriptions. For this, the solution is poured into the container, they lower the paper there, then removed and dried.

Soda and Sol.

To remove ink with paper, it is recommended to use salt under the Extra brand, which is quickly dissolved. It is mixed in equal parts with soda, then poured on a flat, horizontal surface. Next, the sheet ink down is laid on the mixture and leave until the inscriptions will disappear. If you have a plexiglass at hand, you can use a more complex technique:

the glass make a hole so that the cleaning composition does not grow;
about 100 ml of distilled water is mixed with 10 g of citric acid until the latter dissolution is completely dissolved;
the sheet is placed on a mixture of soda and salt inscription down;
on top are plexiglass so that the hole coincides with the stain;
using a pipette or a syringe in it poured a drop of solution.

Plexiglas need to press well so that the citric acid solution is not spread through paper.

Starch

Starch Cashier copes well with gel pen tracks on paper. For its preparation, it will be necessary to mix equal parts of the starch and warm water. After that, you will need to apply the mixture to the place of cleaning and wait for it drying. When the ink is absorbed, the cleaning agent is cleaned with a dry soft brush or sponge.

Vinegar with dishwashing agent

To remove ink, the components are stirred to a homogeneous state. The resulting mixture is evenly distributed over the inscription and leave for 10 minutes until the ink is absorbed. After that, the purified area is treated with a cotton disk with a detergent. Ingredients need to be used in minimal quantity and caution so that the paper structure does not suffer.

Salt salt with hydrochloric acid

The potent composition will be a mixture based on hydrochloric acid. The method is suitable for deleting ink from documents. The saline solution of 20 gr in salt and 30 ml of water, into which hydrochloric acid is not more than 10 ml are added. The stain is treated with a cotton disk either by a ear chop. Remains are removed, glowing the place of cleaning with a wet sponge. Complete the procedure with thorough leaf drying.

Household chemicals

This category of cleaning products includes: White, Domasestos, Other chlorine-based bleachers. Pollution is treated with a cotton wand. After 20 minutes, the stain must be stored with a wet sponge. Then the sheet is covered with a clean and one-photon cloth, which does not leave marks, and stroke the medium-free iron.

Sorval and citric acid

To remove the ink stains, up to 5 grams of each ingredient are enough, which are mixed in a sufficient capacity tank. The mixture is poured into a glass, half filled with water, and is waiting for a complete dissolution of acid. A brush of small diameter is applied to the ink trail. When it is absorbed, the paper section needs to be treated with a wet cotton disk, whine a napkin and dry.

Sodium sulfide

The substance is bred by a small amount of water. The resulting solution is applied to any submitumed agent. Then removed with a paper napkin or a towel. In the process of cleaning, a sharp smell will be released, so the procedure is better carried out in a ventilated room.

Prostokvasha or milk

These products are considered proven and effective tools for cleaning paper from ink. The substance is applied with a cotton chopstick or disc. In the process of applying, it is important to fully process all the stain or remote inscription. When the tool is completely dry, the trail will disappear.

Soda with toothpaste

This composition is used to clean the tight paper, for example, with it, you can remove ink from wallpaper. It is advisable to use toothpaste without dyes. Components are mixed to a homogeneous state. The resulting mixture is applied by an old toothbrush, evenly distributing at the place of pollution. After drying, the agent is removed along with ink.

Hair spray

As part of such cosmetics, solvents are usually present, which make it possible to derive ink from any paper. The tool is sprayed into the place of cleaning, leave for a few minutes, then wipe with a paper napkin or a soft cloth. In the same way, you can clean tissue things, in this case the remnants of the processing are removed with a brush or by hand.

Shaving foam

This facial care means also effectively removes traces from the handles. It is enough to put foam to the desired ink place and leave for a few minutes. Then the composition is removed with a wet sponge, and the leaf is dried.

Medical plaster

Medical plaster refers to mechanical ways to remove such spots. Its less efficient replacement will be sticky tape. With the help of scissors, a piece of the patch is cut into the form of a spot, glue onto the sheet and immediately remove. This method is suitable for dense, unnecessary paper, since the upper layer is removed with contamination.

Shaving blade

The oldest and well-known way. Despite the well-known rudeness, with proper ability, the stains can be cleaned almost without a trace. The blade is pressed to the paper and carefully cut off the top layer, then equal to the nail. The last action is repeated until the fibers are completely laid.

Many of the listed techniques can change the paper paper, leave fat stains or other traces. Therefore, it is not recommended to apply them to important documents, and before cleaning ordinary records, the paper reaction is better to check in advance. To do this, on a small piece we apply the selected tool, and if its color does not change after processing, the substance can be used.

Many have ever encountered the situation when it is necessary to remove ink with paper. Do not cross the same wallpaper after repair, when the child put an autograph on new wallpaper, many are also encountered with the need to remove stains from drowning handles with paper and various surfaces. There are several methods of getting rid of such stains, but they know not all. Ink ink from the ballpoint handles.

The most famous methods are considered:

Blade and Eraser They are considered to be the most common way, the corner is recommended to carefully post the blots, you can go from above with a rubber band. An important role in this case plays accuracy, this will avoid the appearance of a hole.
1 tbsp. spoon vinegar mix with manganese Before getting saturated colors, the resulting solution is recommended to apply with cotton wand, disk or toothpick, the choice depends on the size of the blots. Purple spots are recommended to be removed moored in a hydrogen peroxide with a cotton wand.
Remove the traces of the ballpoint handle, using toothpasteAt the same time, it is necessary to take into account that the method is suitable only for blots of large sizes. The paste must be cautiously rub into paper, wet moistened in the water with a cotton swab.
The bleach is also applied on paper with a cotton wand, after drying on the processed area remains white powderIt is necessary to wash off with water or remove the napkin. To prevent deformation sheet, it is recommended to carefully try the iron through the paper layer.

Paint with printer

Printer paint is distinguished by a specific structure, at the expense of which it is deeply absorbed into the paper surface, so it is much more difficult to remove it. An important role is played by the type of printer. (inkjet, laser), if the device model is not possible, it is recommended to try the method for inkjet printers, then for laser.

When working inkjet printer Screening ink on paper occurs, the drying time depends on the model of the device and the type of coloring agent, most often the humidity is saved for a few more minutes. Immediately after printing, the text of ink can be quickly assembled with a wool tampon, which can significantly simplify the next stage. When taking blots, it is necessary to exercise caution, its absence can lead to the fact that the sheet can break.

In jet printers, water-based ink are most often used, which can be neatly scraped with a razor or sandpaper. It is recommended to roll down towards yourself, chances are increasing if you do it as quickly as possible after printing.

UV-frosting inks are not absorbed, but stick to the surface, so they are easier to scrape them. If all the ways did not give the result, it is recommended to use a touch, write on top of which can be used after it dry.

Laser print It is produced by placing paint into paper fibers, because at the outlet of the ink is already dry. When removing paint from the laser printer, it is recommended to use acetone, which is neatly applied to the surface to the surface. It dissolves not only nail polish, but also the printer paint, with the result that its part is transformed into the liquid again. The method is not considered ideal, but is the only one available. Paper after the procedure changes the color, but a newly written or dialed text will be clearly visible. Due to high flammability, acetone is recommended to keep as far as possible from heat sources, with signs of dizziness, immediately exit the room.

Ink from stamps and seals

Take shangic acid, citric acid and water In proportions 1: 1: 10, stirred carefully, the imprint to gently moisten the resulting mixture with the brush, after moistening the section with water, dry the wet.
Salt, hydrochloric acid and water Mix in proportions 1: 1: 3, the mixture is used in the method described above.
At the first stage moistened in alcohol solution The tampon must be removed the first layer, after which the manipulations described in the first paragraph are repeated.
Sodium sulfite or a substance that includes SO3 to dissolve in water, obtained as a result of the reaction gas returns the paper prime appearance.
To remove stamps of the brand before the rim you need to grasp paraffinAll the paint when stamping should remain on the paraffin. After receiving the letter, the paraffin is recommended to neatly scrape with a nail or knife, after which it is necessary to cut the brand, hold it above the ferry or in water. Paraffin with traces of the stamp should remain in the water.

To remove gel inks will need bleaching liquid and stackIn which you need to pour acetic acid and permanent potassium, to prevent burns to make it recommended in gloves. The resulting mixture must be gently mixed to dissolve the crystals. Pre-under-processed sheet should put tight paper. Draking must be painted with a thin brush, dipped into the prepared liquid. A brush must be carefully driven by blot until its final disappearance, the paper on the processed area should have a brown tint. For information, the stains are recommended to use a wrap, moistened in hydrogen peroxide.

At the next stage, under the paper sheet must be put on soft fabric, cover with another paper sheet, stroke iron average temperature. To get rid of gel inks with dense paper, the same solution is suitable, instead of a tassel, it is recommended to use a match with a rat on the end. For the procedure, it is necessary to prepare several such matches, all actions are similar to those described above.

Removing ink egg

With the appearance of stains on the wallpaper, many do not know what to do, because it is not redone all over.

One of the forgotten recipes is the Babushkin method of removing ink. For this you need cooked screwed egg Cut into two halves and attach to the wall, after a while it will disappear.

Conclusion

There are a large number of various methods for removing blots with paper, all the above options do not require the use of additional effort and costs, all materials are always at the disposal. Before adjusting the document, it is recommended to pre-train on the same sheet.

December 14, 2015

Make a mistake or blot in the text, whether it is a formal document or a common school notebook, very simple. But get rid of the results of your miscalculation much more difficult. But several proven ways, prompting how to erase the pen with paper without traces, still have - about them and talk.

It does not matter what exactly led you to the problem: the desire to correct the assessment, f save the colleague's reputation or its own, feeding the randomly spoiled document, get rid of the fruits of creativity of children in the driver's license or wallpaper, etc. The result is one - ink must be withdrawn. And in this matter, much will depend on 2 factors:

type of surface (dense, thin, vinyl), with which it is necessary to erase ink;
The features of these inks (for feathers or for the handles).

It's all about ink!

It is erroneously considered that there is no one hundred percent recipe, how to erase the handle with paper without traces. Such a statement is explained by the ignorance of ink and paper features. If you initially defined the wrong type, then some methods would not only help, but also harm.

If briefly, the ink is a liquid dye. Most of the composition of modern ink for different handles and feathers is almost the same, but there are specifics.

For feathers, the consistency is a bit thick and more viscous, which is why additional difficulties may occur with their removal with a thin paper surface. Including such ink saturated and matte. The pen is used in exceptional cases, solemn.
In everyday life, there are most often conventional ballpoint handles. Ink, the ink consistency is more liquid. The inscription can glitter a little.
Today, gel pens today, who received their name from the gel-like state used in them. The inscription is more brilliant in comparison with the usual ball.
Capillary handles are widespread, they are markers or markers, ink in which contain alcohol.

Before proceeding to the description of the methods, we will remind the main rule: always check the method on similar paper! Take the same piece, cardboard, piece of wallpaper, etc., apply the same ink, train. Then the result will not be unexpected

Take the gel handle

Erase the gel handle with paper without traces using the following methods.

Method 1. Manganese and hydrogen peroxide

So, to remove the gel handle with ordinary paper, you will need a manganese, cotton wool (make a small roller from the cotton; you can rummage cotton to match, pencil) and hydrogen peroxide. It is necessary to dissolve a thick, sour cream solution, well stir so that the manganese absorbed the liquid. The resulting cleaner neatly apply on the inscription. And then it is important to wait only 5 seconds, after which itching the roller in the peroxide and quickly, not pressing, assemble from the surface of the manganese solution.

If there are spots on paper, it is possible to remove them using the same hydrogen peroxide, giving a cotton swab or cotton wand. Irregularities are smoothed by iron (place paper between 2 clean sheets and stroke).

Method 2. Manganese and acetic acid

In solving the problem, how to erase the paper handle without traces, will help similar to the previous way. In a small amount of manganese add to the eye acetic acid and stir until a homogeneous saturated purple shade is obtained. Let the brightness of the resulting color do not confuse you. Next, the purple fluid is neatly (can be a cotton waller or through a syringe) apply and wait until complete drying. After the procedure, there are divorces, which are easily removed moistened in peroxide.

Remove the ink ballpoint pen

Method 1. Glycerin

Erase ink with paper without traces will be able to mix ordinary pharmaceutical glycerol with simple medical alcohol (1: 1 proportions). The mixture should not stand for a long time. Before direct use it must be mixed. Next, put the mixture on the inscription and simply wait. Ink should disappear. If necessary, paper can be swallowed by the method specified above (between 2 pure sheets).

Method 2. Household chemicals

Very simple and affordable ink removal method. Household chemicals are suitable for removal of spots by the type "Cinderella", Vanish, Amway Prewash, Amway SA8 or Domestos. The principle is similar: Apply a thin layer with a cotton wand and wait for complete drying. Ink should be absorbed from the surface into the remedy during the drying period. If necessary, the procedure can be repeated.

Remove inks from wallpaper
Method 1. Starch

If this finishing material is thin, then to solve the problem, how to erase the handle from wallpaper without traces, it is worth using methods within which the funds applied do not contain a lot of moisture and on the consistency go to the cassea or cream. Then the wall surface is eclipsed less.

Mix in equal proportions starch and warm water. Take a thick mixture on a stain and remove the dry cloth or a napkin after drying.

Method 2. Sol

For more dense wallpaper, use the following method: Take in equal proportions water and hydrochloric acid, add to the solution of 1 tbsp. l. Salts (per 100 ml). Stir and apply to ink. The procedure can be repeated, but in most cases ink disappear after the first application.

Method for 3. Economic Soap

This method is ideal for vinyl wallpaper and is very easy to implement. Machine soap (desirable present, Soviet) in warm water so that a soap solution. Clean, soft kitchen sponge apply a solution on a stain. Wipe the treated area with a dry soft cloth (do not press much) after 10 minutes. If necessary, repeat the procedure.

At the end, you should mention another rule of ink removal from a paper surface. This matter does not tolerate fuss and hasty. It is rather jewelry. And, before checking one of the ways given in the article, tune in to the painstaking work. Do not hurry - and annoying mistakes will really erase, remaining for you in the past.

Comments

Add a comment

12th of February

Disputes about what is better: Teflon or ceramics, no one year continues. The pros and cons of each of these species of coatings. Consider more.
October 1, 2018

The refrigerator refers to the mandatory configuration of each modern house, but, despite the most advanced models, and they can not break or work correctly.
August 16, 2018

Owners of electrochetics know that over time, raid is formed at the bottom and walls of the bowl. At first glance, he seems harmless because it does not interfere with drinking hot drinks. But then you will notice that the water has become muddy, then its taste will change.
July 5, 2018

Choosing gifts is not always a simple task, because it is important to take into account all the nuances: age, gender, interests and hobbies, activity and much more. It is especially difficult to choose gifts to loved people, because in this case no longer comes to refer to "did not manage to prepare," "forgot" or even on "Here's an envelope that will help you in implementing some desires."
July 3, 2018

The life of a modern person is impossible to imagine without household appliances, every day we will use the "benefits of civilization" and do not even notice this until one of the devices will fail. So, if nevertheless, your vacuum cleaner has failed and needs breakage, then you should not slow - rather do it with repairs.
June 28, 2018