Encyclopedia 

Presentation on how to sew a cat on a teapot. Bulky textile teapot: master class

So how do you make such a wonderful teapot?

For this we need:
- fabric (most often it is cotton, chintz, calico)
- synthetic winterizer
- lace, buttons for decoration (optional)
- scissors, threads, needles, etc.

Pattern:

The pattern of a long piece is 13 cm with allowances, the diameter of the upper circle is 14 cm, that is, increase the pattern to these parameters.

Let's start with the largest teapot - from the belly). According to our pattern, we make 8 shreds with allowances for the outside and 8 for the inside.

We take 2 shreds for the outside and 2 for the inside:

We sew all 4 details in this way. turns out like an asterisk. We make cuts on the folds / rounds so that the fabric does not wrinkle after turning. When sewing on, make sure that the outside (which is visible from the teapot) is the outside of the fabric.

As before, 4 layers are sewn together, making cuts:

We continue to sew very neatly from right to left:

Sew the inner shreds and the outer ones:

From the front side we turn over to the inside as shown in the photo - so that everything is inside, like in a cocoon. We sew - we connect our strip to the future belly of the teapot. Don't forget to make cuts:

We take out the future teapot through the bottom of the "cocoon", turn it inside out:

We make the bottom of the teapot in 2 copies - for the inside and outside. You have a pattern, but, in my opinion, it is better to fit the resulting kettle.

Thus, we sew the inner bottom first:

We knit the resulting lobules with padding polyester. Here's what happens:

We make the outer bottom, wrap it with an outer cloth in cardboard, stitch it, then sew the resulting bottom to the kettle with a blind seam:

Then we make 2 ribbons for the top of the teapot. 3.3 cm of fabric in width, as long as the perimeter of the circle of our top and 2.5 cm of padding tape. It can be a synthetic winterizer or thick fabric.

Fold the padding inside the fabric tape and sew to the top:

We cut the spout and handle of the teapot, you have a pattern:

Sewing, making cuts:

We fill with padding polyester:

With the help of a blind seam, we sew the tightly packed spout and handle to the "belly" of the teapot. Make sure they are diametrically opposite.

Here's what happens:

We make a cover. On the existing top, make a pattern (circle), it is better to do the fabric on the lid with good allowances:

We sew the cover, stuffing it with padding polyester between the fabric and the cardboard. We make the second circle - for the bottom of the lid, we also "put on" a circle made of cardboard into fabric and sew, tightening:

Sew on the resulting blind seam.

We make a handle for the lid, for which it can be lifted. We make a circle of fabric, sew in a circle, tighten

We tighten our handle, stitch it, as shown in the photo. Sew the handle to the center of the lid:

OK it's all over Now! Tadadadam! The teapot is ready The teapot turned out to be 9 cm high, excluding the lid, with a diameter of 10 cm.

It remains to hide something tasty and candy inside and put it in a conspicuous place.

Material taken from the Internet !!!

Drinking tea with friends is always a pleasure. Better yet, do it in a kitchen decorated with cute accessories. They are very popular now. Of course, you can buy them, but it is much more interesting to make them yourself. Read the materials of the article. Start the creative process. You can make an excellent one with your own hands. The master class examines various options for creating this kitchen item.

You can make an accessory in a simple shape with just a couple of stitches. The work will take no more than an hour. Having mastered the technology, if you have the desire, patience and free time, you can make a souvenir from several beautiful scraps, as shown in the illustration above, or take any complex sample from the article.

We sew unusual heating pads for teapots with our own hands

The infuser, however, like the one in which you boil water, tends to cool quickly. They will not be able to provide a long conversation with the situation can be corrected by sewing for them "clothes". It will serve as a functional item and decorative element in your kitchen.

If you decide to make a heating pad for the first time and want to do it quickly, use the simplest option - sew the product like a cap with an eyelet or in the shape of a cylinder.

For those looking to create something more effective, you can use one of the ideas below. A kettle warmer can be made in the form:

  • Tilda dolls, pumpkin heads or any other technology;
  • bird or animal;

  • a fruit or vegetable that is sewn from petal-shaped parts;

  • a snowman or a Christmas tree as a New Year's decor.

Felt and fleece favors are also popular and easy to make. These materials do not require edging and can be sewn on the outside with a regular overcast or decorative stitch. Small felt elements are easily glued to the base.

Materials and tools

So, you want to get an original kettle warmer with your own hands. Let's start a master class on making this kitchen accessory by studying the list of necessary items that need to be prepared.

Purchase or remove the following items from your cabinet before starting work:

  • multi-colored patches for a decorative base;
  • lining fabric;
  • batting or any other insulation to create a functional layer of a heating pad;
  • paper, a pencil for constructing a pattern (or a printer, if you will print a template);
  • scissors;
  • pins, chalk;
  • thread with a needle;
  • sewing machine;
  • decorative elements (beads, plastic eyes, lace, sequins, floss, brushes and paints, if you make the doll this way).

In general, nothing special is required. If you do handicrafts, you probably have everything at home. If not, it's easy to acquire. It is good to find a store that sells fabric by weight. Small shreds are sold there. They are just right for you.

Do-it-yourself kettle warmer: master class

The simplest option in the form of a hat will be considered here. In fact, on its basis, you can sew a more complex thing, complementing the base with a voluminous animal head, paws, tail or doll elements.

If you want to make a heating pad very quickly, you can even take a factory towel or napkin and use not only bright colors, but also the trimmed edge to your advantage.

So, in order to sew a heating pad for a teapot with your own hands, you will need to take some measurements:

  1. Take the item you are going to make clothes for, determine its height.
  2. Measure the largest width with the spout, unless you make a hole under it to pour the drink without removing the heating pad.

How to sew an elegant young lady

Adorable teapot heating dolls can be crafted from all sorts of leftover scraps of fabric. Textile souvenirs and their production are now fashionable direction of needlework. Warmers made in the form of girls and women dressed in puffy dresses have always been a traditional kitchen attribute. Previously, they were performed based on the Russian folk costume in the form of peasant women and merchants.

Now Tilda, pumpkin heads or all kinds of characters in the form of modern girls, fairy-tale heroes or even humanoid animals are gaining more and more popularity.

To get such a product, you will need to sew the base using the method from the previous section and separately make the arms, head and connect everything together. A blank in the shape of a heating pad can immediately be made in the form of a dress.

Heating pads in the form of vegetables and fruits

You can sew an orange, a tomato, and an apple. A spherical shape can be made from parts in the form of symmetrical petals, the bottom of which is cut in a straight line.

So, you have seen how to make a kettle warmer with your own hands. The crafting workshop made sure it was simple. Choose any idea. Embody it in material. Surprise your guests with original jewelry of your own production.

Applied art is now very popular among both housewives and busy business women. A thing that you can't buy anywhere, especially one made with your own hands, will bring comfort and warmth to your home. It won't take long, but it will give you tremendous pleasure.

Is it getting colder outside the window and you are increasingly drawn to drink tea with bagels? Wonderful. We leave for the kitchen and start the process. Oh, what a shame, you have to reheat the kettle, which means you have to wait.

Why waste time. I propose to get down to business. We are opening a master class. So, we will sew a teapot heating pad with our own hands. You can, of course, get by with a sauna cap or an old ski hat. But I propose to turn on the imagination and depict, for example, a rooster, or you can imagine a chicken. And if it does, then a Russian woman in a national costume or an important merchant's wife. I assure you, it will not be much more difficult, but much more interesting.

First master class

Warmer cock

For the basics you will need:

  • the cloth ;
  • synthetic winterizer;
  • buttons - 2 pcs.

It's all. Even a sewing machine is optional if you have the desire and skillful hands. And I am sure you will always find scissors and threads with a needle in your home.

1. We start making a simple paper... This requires measure the circumference of the teapot, including spout and handle, as well as its height. We take these dimensions as a basis.

Take the simplest version of the picture for a start. I found it on the Internet.

2. We select fabrics... The drawing can be absolutely any, from variegated to monochromatic. If you find extra waffle or terry towels in the house, the cock will be irresistible.

If there is no padding polyester, then it will do batting or any other insulation.

For the wrong side, you need a thinner one, but again, cotton fabric, cambric or chintz... For the manufacture of small parts, such as a comb, beak and beard, try to find a dense, preferably red, the cloth... But this is also not a prerequisite. Convenient to use, fleece, drape or any dense material that does not require additional processing.

3. We transfer the drawing from the paper base to the fabric, not forgetting to add 1.5 cm to the seams. We cut small details (comb, beak and beard) separately. And cut it out. All parts need to be cut out in two pieces.

4. We fold three layers of our future heating pad in sequence: top, synthetic winterizer and lining. We cut it off with pins. We got two identical blanks. So that the blanks do not fall apart and have a finished look, we sew or manually embroider decorative seams on each of them. This will accentuate the volume. And also it is best now to sew an eye button to each separate half.

5. We fasten the resulting two blanks with pins or a basting., with a seam inside, not forgetting to first hoist into their places the pre-sewn small elements: comb, beak and beard.

6. Before final stitching, turn the sample out and try it on. by placing it on the kettle. At this stage of ours, you need to make sure that the heating pad will fit just right. Sew together the two side elements of the heating pad with a final seam. And don't forget to overlock this inseam by hand or overlock.

7. If the height of the product allows, fold the bottom edge inward and simply sew... If not then use braid, piping or fabric remnants for the formation of a decorative welt of the product.

The rooster warmer is ready. Now you can put it on the kettle and not worry about it getting cold quickly.

By the same principle you can sew a chicken by excluding one element. Yes, it's a beard. So let's not repeat ourselves, although the chicken will come in handy too, since you also have a teapot. And this is a whole family. Also consider a mitten and potholders in the same color. Do not hesitate, your household will love it.

If you master the simple action of making such an impromptu rooster warmer or chicken warmer, then, believe me, you will not be stopped. For this reason, I propose to portray something more delightful in the next master class.

Second master class

You, I hope, have heard about a woman at a samovar? Here. Let's make a doll heating pad. Believe me, this is also not difficult, since we will only use the materials available in every home, which means that you will not have to buy anything on purpose. You are already quite an experienced master.

Baba on a samovar or a hot-water bottle

So. We sew a young peasant woman, a merchant's wife or a society lady? The less we guess, the more interesting the result. In addition to the materials that were used for the basis of the previous craft, we are looking for everything in the house that can be useful for an exclusive and truly magnificent work.

Useful for us:

  • ruffles;
  • lace;
  • tapes;
  • beads.

It's simple.

1. Sew according to the pre-measured size of the base... You already understood how to do this. But I propose to simplify the task even more and draw a regular rectangle as a pattern, the length of which is equal to the diameter of the teapot, including the spout and handle. The height is also known. Don't forget to add 2cm for the seams. This will be the base, it is also the petticoat.

2. You need to sew the folded parts together. bases with just one seam.

3. Trim the bottom of the skirt with a neat hem., and assemble the top into an assembly, not forgetting to leave a hole for sewing in the body.

Here is the petticoat and ready. You can leave everything in this form, additionally hoisting a pretty apron over the finished doll, which, if necessary, can always be removed and washed. Which, of course, is very convenient.

But, if all this seems to you not enough and your imagination continues to run amok, do not deny yourself the pleasure of entertaining your imagination and start sewing a chic top skirt.

4. Top skirt.

If you decide that your product is not a simple woman for a samovar, but an exclusive work of art, then do not limit your possibilities. Use beautiful bright fabrics, lace, ruffles, flounces, artificial flowers and all sorts of fashion accessories. Anything will do. Sew the finished top skirt along the side seams. Fold up the bottom. Reassess if all the details are applied, and bond with a cotton base.

That's not all. A little patience.

5. To complete the masterpiece you have to find or manufacture very important parts... For them, you can use the elements of an old rubber doll. Of particular value is the head, where everything is already there: eyes with cilia, lips, ruddy cheeks and even hair. If there is no extra doll in the house, then you will have to work a little more and sew the head, torso and arms separately. Or you can link. Experiment. Old knitwear, socks or tights can also help out here.

6. Sew up the sewn or knitted head, turn it out and fill it with a placeholder. The pattern for the head is simple and depends on the size of the doll. I suggest using the following.

7. For creating hair and styling a hairstyle use any yarn, including bright and colored. You can embroider a smooth hairstyle on a soft base with a parting in the middle, and then braid voluminous braids or tie funny tails with bows. Or you can immediately create a lush head of hair, having previously dismissed the old scarf, which will give volume and the effect of curls. If you decide to dress the young lady in a knitted hat, turban or a spectacular deep hat. In this case, you don't have to bother with making hair.

8. Arms and torso cut and cut according to an uncomplicated pattern that does not require exact measurements. One condition is that all parts of the body must match each other. Each part needs two pieces. Sew them together with neat seams, turn them out and fill them with filler. It is convenient to use knitted materials.

The patterns are so simple that you don't have to look for them on the Internet. You can easily draw them yourself:

9. Arms, torso and ready-made head it is necessary to connect together to get a whole workpiece.

10. Final touches... Embroider funny eyes, nose and smile. Dress the doll in an elegant blouse. You just have to carefully fasten the workpiece to the base (lower and upper skirt). Everything.

Just class. The result was not a woman at all, but a charming girl. But as soon as the crown is placed on her head, it will be a princess. And with a rose in black hair, you can get a beautiful gypsy.

Experiment. Believe me, there will be no limit to the delight of family and friends. Now you know how to sew a kettle heating pad with your own hands. Do not hesitate, the ability to make such souvenirs will definitely come in handy for you. You can now give a master class to anyone. Moreover, now the issue of gifts has been resolved once and for all. Moreover, such textiles are now in vogue. It is also a functional gift. After all, it not only decorates the kitchen, but also allows you to keep the heat inside the kettle for a long time. Which is what we wanted. Enjoy your tea.

Teapot warmers have been around for a long time. This is due to the fact that it was easier to wrap up old samovars and teapots properly, keeping warm, than to warm up again every time. Nowadays, a kettle warmer is more a tribute to tradition than a harsh necessity. But it must be admitted that tea, which was not just brewed, but brewed due to the heating pad, is much tastier.

What is such a thing? Insulated cover to cover the teapot. But leaving everything like this would be too boring, so housewives and craftswomen are experimenting with various forms that such heating pads take. The most popular options are dolls, or women. And this is quite logical - wide skirts are a cover with insulation, and the upper part of the doll is purely decorative. Also popular are heating pads in the form of cats, chickens, owls, houses and fruits. They attract the attention of novice craftswomen, since making them with your own hands is much easier than sewing a doll.

Material

There are only two options. Kettle warmers knit, crochet, most often. Knitting patterns rarely contain complex combinations of elements - their function, rather, is to indicate increases and decreases. Knitting amigurumi is practical, but toys knitted using this technique are simply charming. You can also knit a toy for a teapot on knitting needles, but it will be difficult to find some stunning patterns for this purpose, so crochet patterns are more common among handmade craftsmen.

Also, the covers for the teapot can be sewn by hand or on a sewing machine... Such patterns are not difficult - in any case, their lower parts. Wide skirts are sewn in a circle, but the top, the woman herself or the doll, is sewn in different ways. It can be a tilde doll, or a nylon doll. Someone prefers to sew fairy-tale princesses, while someone will like the Baba Yaga doll is a matter of taste. It is only worth noting that without skill and practice it will be difficult to sew Baba Yaga from any material - she is too characteristic a character.

Gallery: do-it-yourself kettle warmer (25 photos)

















Tilda kettle warmer - step by step master class

Since tilde dolls are not only people, but also animals, a cute teapot in the shape of a giraffe will be an excellent option for such a craft. So, a heating pad for a kettle - a master class will require:

First step... The main heating pad, that is, the doll's skirt. For it, you need to cut a piece 74 by 80 from the fabric, and from the filler - 70 by 80. This difference is made so that the skirt can then be folded and gathered without problems, and at the same time it has the desired shape, and does not bulge in all directions ...

Second step... You need to draw squares on the main material. They will be required for further quilting of the skirt. The piece of fabric is divided in half vertically, then horizontally. Further, 15.5 cm is laid from the center. Thus, a lined field will be obtained, and the rectangles from the edges will be narrower than the central ones.

Third step... Put the lined fabric on a synthetic winterizer, pin off. Further, you need to sew on a typewriter, but do this not along the lined lines, but departing from them by 2-3 mm on both sides. Thus, the drawn line will turn out to be honey of two seams. These are the pockets for the frame.

Fourth step... Fold sewing in half with fabric side inward and sew while closing. Then turn it out and fold it in half horizontally. Measure the wire and insert into the pockets.

Fifth step... Bend the top of the skirt a little and sew with a blind seam. After that, the top is pulled together. Fix the assembly in such a way that, if desired, the thread can be loosened or, conversely, pulled relative to the doll's body. The skirt is ready.

Sixth step... Transfer the pattern to the fabric - you will need 2 parts for the body, legs, ears and horns. Cut with seam allowances and sew. In the places of the rounding, make notches on the allowances, this is necessary in order for the parts to turn out without creases.

Seventh step... Turn the parts to the front side, fill with filler, sew the edges with a blind seam.

Eighth step... Assembly. Sew horns and ears to the head - their location and slope can be different, everything is individual. Next, insert the giraffe inside the skirt, check the assembly, and sew the doll to the skirt. Do not sew on paws!

Ninth step... Measure the torso, cut out two pieces of colored material - for clothes. Sew the details, bend and stitch all the edges, iron the seams. After that, sew the second edge and put it on the giraffe. The sleeves for the dress are made in the same way - with the difference that it is not necessary to measure the girth, but simply increase the pattern of the legs by 5–7 mm. Sew sleeves and put on paws. After that, sew the paws to the body.

Tenth step... The upper skirt is sewn of colored fabric, its size is 35 x 100 cm. The edges are decorated with lace and braid. Iron all the seams, grip the top a little and put on the petticoat. Finish the assembly "according to the figure" and fix.

Eleventh step... Draw eyes and blush. Gently roll on the hair, depict a hairstyle - at least a pigtail. Tilda is ready!

Do-it-yourself kettle warmer "Cat" - a small master class

Many people cannot imagine home comfort without a cat in the apartment. These fluffy wayward purrs really create their own atmosphere. A do-it-yourself heating pad in the shape of a cat will undoubtedly make tea drinking even more comfortable. This is done quickly and easily. To work you will need:

  • fabric, sheet filler (synthetic winterizer) and a little voluminous;
  • sewing accessories;
  • braid for processing edges;
  • buttons for the eyes.

First stage... Transfer the details from the pattern to the fabric and cut with seam allowances. On one side of the heating pad, all the elements will be located - both the cat's face and its tail. On the back there will be a small pocket for tea bags or other small items.

Second phase... The main part consists of two pieces, inside which the insulation is located. Cut out a piece of padding polyester, 1–1.5 cm less from the edges than the main part. Sew the fabric cover of the first half, turn it to the front side. Sew on the tail piece, then insert the synthetic winterizer inside the piece. Sew the bottom with a blind seam. With the second half, do the same, but sew a pocket over the entire width instead of the tail. Sew both halves along the top with a blind stitch, if desired, trim with braid.

Third stage... Sew the cat's face according to the pattern. Fill with filler, sew to the front of the heating pad. Treat the bottoms with braid. The cat warmer is ready!

If you remember the traditions of tea drinking in Ancient Russia, many will immediately come to mind at the same time so cute, original and at the same time funny tips. While homemade attachments in the form of various figures were used, and in cartoons we saw how an ordinary felt boot was used for the same purpose. With the advent of electric kettles and the rejection of bulky samovars, interest in tea has not disappeared, but the truth and ceremonies for the use of such a drink are no longer so sustained.

Most often, we drink it on the run, getting ready for work, or, more correctly, in a quiet, comfortable atmosphere during our rest. This is where the accessory forgotten by many will come in handy (though not for the electric kettle itself, but for the teapot) - a heating pad for the kettle with your own hands. Patterns can be made easily, sewing is also not a big problem. Such a thing will perfectly fit into the interior, and if you wish, you can make it look like some kind of plant, animal or any other object. Let's consider in detail how to implement such an idea.

Kettle warmer

In the modern world, any item can be purchased in a store. Kettle warmers are no exception. Such a thing is useful in the household: it helps to keep the water in the kettle hot, makes the brew stronger, and is also part of the interior. However, often in the store you do not find something that you would like enough to want to buy.

There is a way out of this situation: we take patterns, fabrics and do what you want.

Kettle warmer pattern

Diagrams and patterns for a kettle warmer with your own hands found on the Internet are not always suitable for a particular case. Therefore, this method is not the most correct one.

In order not to face problems, it is easier to make a pattern yourself, especially since it is not so difficult. To do this, you need:

  • A2 or A3 paper. Both graph paper, sold in specialized stores, and a regular newspaper will do.
  • Stationery (pencil, eraser, long ruler).

The first step is to make measurements of the kettle: width and height, and write this data on a piece of paper so as not to forget.

Important! Height is measured from the base to the top of the lid, and the width is measured from the outermost part of the handle to the end of the spout.

  1. We lay out the paper on the floor or table.
  2. We put aside the height of the kettle, adding a couple of centimeters of stock.
  3. The second number is the width, we divide it in half, set aside the resulting figure perpendicular to the height, not forgetting in reserve.
  4. We connect the extreme points with a quarter circle. You can change the shape a little, make it more square.

The pattern is ready! It remains only to cut it out, and you can proceed to the next stage.

We sew a heating pad

The next stage raises the question of how to sew a kettle cover with your own hands, having patterns?

For this part of the work you will need:

  • Thick fabric for the inside of the heating pad.
  • The fabric you like for the outside.
  • Insulation (preferably synthetic winterizer or cotton wool).
  • Jewelry items, if you want to complement the finished cover.

Next, we perform the following actions:

  1. Fold the light fabric in half. We put a pattern to the fold so that when cutting out a blank from the fabric, we get a semicircle. There should be two such details.
  2. Repeat step 1 for thick fabric. As a result, you should get four blanks: two light and two dense.
  3. Sew a light fabric around the circumference without touching the base. We repeat the same for thick fabric blanks.

Important! You can use a sewing machine for faster, more durable stitching.

  1. We sew the blanks at the base, not forgetting to place a warming filler between two layers of fabric.
  2. We bend the lower part inward by a centimeter, iron it and stitch it.

Important! If you wish, you can sew a small loop on top. To decorate a do-it-yourself kettle warmer, you can use different fabric products:

  • bows, butterflies and other little things that can be bought in sewing stores;
  • beads and beads;
  • embroidery.

Heating pad ideas

If you want to make something unique, you can slightly change the scheme or even make the cover look like any animal, be it a cat, rooster or cow.

Warmer cat

To make an ordinary heating pad look like a cat, you need to choose the right fabric and add several elements, for example, a tail, a head with eyes and a nose, and paws.

It is not at all necessary to sew everything separately: you can just draw some parts. It all depends on your imagination.

Rooster warmer

How to make a rooster warmer for a kettle with your own hands? This is a little more complicated than making a cat:

  • Firstly, the shape of the cover should be slightly elongated and end with a “head”. To this head you need to sew a beak, beard, comb and eyes.
  • Secondly, any rooster must have a tail. We make each one separately for him. We cut out two arcs from a certain color and sew them together, stuffing with padding polyester. Sew the finished feathers to the part where the rooster should have a tail.

Important! The puffiness of the tail depends on your desire: it may be puffy or it may not exist at all. You can make a tail by simply stretching the back of the heating pad a little.

  • You can also make wings by simply drawing them or making them like a tail out of fabric.

Warmer cow

It is done in almost the same way as a cat. The head should have horns, nose, eyes and ears. The tail is made of a fairly thick rope, at the end there is a tassel. You can sew a loop instead of a tail.