Encyclopedia 

Potholder funny sewing patterns. Patchwork potholders: patchwork sewing for your favorite kitchen. The simplest sewing methods

The sewing process begins with cutting. You need to mark the fabric and cut out squares from the facing and interlining material with a side length of about 25-30 cm. Accessories can be a little larger or smaller - it all depends on your desire.

Then fold the squares like a pie filling: face fabric, outer side down, then layer, top with face fabric, outer side up. Fasten the workpiece with pins and sew with a needle or sew on a sewing machine around the perimeter, retreating from the edge at least 5 mm.

The next step will require masking the seams. To do this, cut the required piece of tape, baste it along the edge of the product, then turn it over to the wrong side so that the cuts remain under the tape and stitch it on a machine. Make a neat loop from the braid in one of the corners. You will need it to hang the accessory on a hook.

If you have the desire and skill, the front and back sides of the potholder can be decorated with appliqué from ribbons and pieces of fabric.

Potholders in the form of a moth and mittens

DIY butterfly potholders are made from fabric with patterns using the same materials as the previous model. But the cutting method here will be significantly different: the parts can be shaped like an oval, a figure eight, or stylized like a butterfly.

To create the product you will need 5 layers of fabric: the bottom front, interfacing and 3 top front. The 2 upper front ones are cut in half and the cuts are shaped like an almond grain.

Ready-made parts are assembled as follows:

  • The cut elements are applied to a whole layer and stitched together, retreating 5 mm from the edge. Edging is done with braid.
  • The 2 lower layers are connected together - the outer fabric and the insulation.
  • The upper finished part is applied to the lower one and ground down on a machine or using a needle. The edging is attached around the entire perimeter.

The kitchen in the house often turns out to be almost the most important room. After all, not only are all kinds of dishes prepared here, the whole family gathers at the table, guests meet, and important dates are often celebrated.

It is very important that the kitchen is comfortable and beautiful. The comfort in it will help create special textiles that you can make yourself. Tack, perhaps, the very thing with which you can try to start creating your own unique kitchen.

How to sew a potholder with your own hands?

The main requirement for tack welding is low thermal conductivity, so it needs to be made in two or even three layers. As for the design and shape, the potholders can be absolutely anything - round, square, mitten-shaped or fruit-shaped. Still, the most common types of potholders are square potholders and mitten-shaped ones.

If you want to sew potholders using the patchwork technique, then read the articles DIY Patchwork, Patchwork for Beginners.

Square potholder for kitchen

In order to independently sew a square potholder You will need:

  1. thick cotton fabric, size 18x18 cm - 2 parts;
  2. piece of batting 18x18 cm - 1 piece;
  3. thin cotton tape for edging measuring 4x80 cm - 1 piece (it is cut out on the bias);
  4. threads to match the color of the fabric;
  5. wooden ring with a diameter of 4 cm.

On one piece, mark 35x35 mm squares at an angle of 45 degrees. Then connect the batting and the part you marked, align the cuts and make lines according to the markings. Take the second piece and place it face up on the resulting quilted piece, stitch along the perimeter at a distance of 4-5 mm from the cut; 4.

Prepare the strip for the edging - fold the cut in half and iron it. Then fold the edges and iron them as well. As a result, you will get a strip 10 mm wide. Starting in the middle of one side, edge the edges of the potholder. Before completing the edging, form a hanging loop, 4 cm long, from the remnants of the strip and thread the prepared holder ring.

How to sew a kitchen potholder in the form of a mitten?

To make a potholder You will need:

  1. thick cotton fabric measuring 70x20 cm;
  2. piece of batting 70x20 cm;
  3. thin cotton fabric measuring 20x20 cm;
  4. strip for edging 50 cm long;
  5. threads of the desired color;
  6. wooden ring with a diameter of 4 cm.


Fold the fabric in half so that the right side is on the inside. Cut out the parts of the potholder, there should be 2 of them - batting, a thick cotton top, a lining made of thin cotton fabric. Layer the top, lining and batting pieces on top of each other and make 35x35mm diamond stitches.

Make a border around the outer edge of the mitten. Attach a loop with a ring to the outer cut. With the right side facing inward, fold the quilted blanks and stitch them along the cut, the seam width should be 1 cm. On the curves, cut the seam allowances with scissors, and in the place of the thumb, make a die-cut, but do not reach the line by 3 mm. Turn the pot holder right side out and iron well.

How to sew beautiful oven mitts in the shape of a heart?

A beautiful and original potholder is potholder in the shape of a heart.

You will need the following materials:

  1. suitable color fabric,
  2. padding material, such as foam rubber,
  3. red braid,
  4. desired thread color.

You also need your great desire to do something very touching.

Draw a heart using your own template and divide it into 3 parts.

Cut out the entire heart from fabric of the same color (this will be the back part of the potholder) and 2 outer parts also from material of the same color.

Sew the braid along the edges from the inside and back. Make a pattern for the center of the heart from a material of a different color. Now sew all the parts of the heart together, not forgetting to sew the back one.

Trim the resulting excess material and fill the heart with filler (it is better to use thin stuff). Sew a red braid along the contour, and your heart potholder is ready.

Photos taken from the site: www.liveinternet.ru

Do-it-yourself tack in the shape of a maple leaf

A beautiful and unusual potholder can be potholder - maple leaf.

Using the template, cut out blanks of maple leaves. For one potholder you need 3 such sheets, each subsequent leaf should be slightly smaller than the previous one.


Sew a loop to the base of the first sheet. Then fold 3 sheets together and stitch them, so you get maple veins.

Photos taken from the site: handmade.antikus.ru

How to sew oven mitts from drape?

A beautiful and uncomplicated version of the potholder comes out of the drape. This material is quite dense and therefore does not require an additional layer. Cut out 1 or 2 pieces and finish the edges.

Original potholders are made from drape in the form of cats. Draw not very large cute cats on paper. Cut out the pieces from the drape. Sew the edge with a colored thread in a single crochet and make a loop. Embroider the cat's face with thread and make button eyes.

The oven mitt for a cozy kitchen is ready!

By experimenting with different types of fabrics, fillings, appliques and other decor, you can start creating cute and cuddly things. They will be able to decorate not only your own kitchen, but also the kitchen of your friend, mother, grandmother or mother-in-law. A little imagination - and a wonderful handmade gift is ready!

Especially forLucky-Girl. ru— CNezhana

Oven mitts are simply an irreplaceable thing in the kitchen. Without them, cooking becomes a real pain. Naturally, each of the hostesses wants them to be present in sufficient numbers. There are many variations of their manufacture, and the sewing process itself is incredibly simple.

If you don’t have the necessary materials at hand, you can even sew them from kitchen towels, but if you use oven mitts in the kitchen also as a decorative element, then you should approach the process creatively and scour the Internet, because from there you can get not only new ideas for creativity, but and download and print pictures or templates for patterns or knitting patterns. Or even take as a basis a master class that will show you how to make step by step, for example, round potholders with appliqués. An oven mitt can even be a gift for the New Year - if you make it in the form of a symbol of the year, for example, this year it was a pig and oven mitts with a pig's face have appeared in many kitchens.

Oven mitts are simply an indispensable thing in the kitchen.

Even a novice needlewoman can sew original grips in the shape of birds. You just need to follow the instructions exactly so that within a couple of hours such an unusual accessory will appear in your kitchen.

Even a novice needlewoman can sew original grips in the shape of birds.

Progress:

  1. Draw on the fabric and cut out a couple of identical circles.
  2. Cut out exactly the same circle from the lining material.
  3. Place these three pieces together and stitch along the edges.
  4. Now cut out a couple of parts for the wings.
  5. Fold each element in half and stitch it onto a circle, making sure to align the cuts, thus forming a gap.
  6. Separately cut out a piece for the head, fold it and stitch it.
  7. Sew on the beak and comb.

Additionally, embroider the eyes.

Patchwork potholder: sewing from patchwork for beginners

Patchwork is an amazing handicraft, which is recommended to be mastered using potholders. It is very easy to make small kitchen accessories using this technique; you just need to stock up on scraps of fabric.

What is necessary:

  • fabric in three colors;
  • lining material;
  • scissors;
  • threads;
  • ruler;
  • pins.

We sew in stages:

  1. From scraps of fabric, cut into squares with sides exactly ten centimeters.
  2. Cut each piece into triangles.
  3. Arrange the triangular elements in any order and sew.
  4. Make the second side of the product in the same way.
  5. Place lining material between these two parts.
  6. Sew the edges and secure a loop in the corner.

Oven mitt for the kitchen (video)

A simple pattern for an oven mitt

Armed with patterns, any needlewoman will be able to sew incredibly beautiful potholders in the shape of a butterfly. The product will no longer be a simple kitchen accessory, but will become one of the most striking decorations in the home.

Armed with patterns, any needlewoman will be able to sew incredibly beautiful potholders in the shape of a butterfly

Progress:

  1. Make a life-size pattern and transfer all the details to the fabric, cut out.
  2. First of all, sew the upper parts, retreating about five millimeters from the edge.
  3. Edge the seam immediately.
  4. Treat the lower layers in the same way, but do not edge them.
  5. From the outside, sew the upper elements to the base, also retreating five millimeters from the edge.

Sew a ribbon along the edge of the resulting butterfly.

Mittens: master class on sewing

Mittens are the most convenient to use in the kitchen. Especially in those cases when you need to get something out of a hot oven. This mitten is made very quickly. The main thing is to cut the material correctly.

Mittens are the most convenient to use in the kitchen.

Progress:

  1. Transfer the pattern to the fabric and make four identical parts.
  2. Cut a couple of exactly the same elements from the filler.
  3. Fold the fabric pieces right side inward.
  4. Place the filler on top and bottom, cover them with the remaining two fabric elements, but with the front side facing out.
  5. Sew the workpiece, retreating at least five millimeters from the edge.
  6. In those places where the indentation is too wide, narrow it using scissors.
  7. Turn the workpiece inside out.
  8. Cut off excess protrusions.

Sew on a small loop.

How to sew a felt potholder: step-by-step instructions

The pot holder in the shape of a maple leaf looks incredibly beautiful and original. Felt is used as the main material in this case. It is with its help that maximum realism can be achieved. The leaf is very difficult to distinguish from the real one.

What is necessary:

  • felt;
  • needle;
  • pencil;
  • threads;
  • paper;
  • scissors;
  • pins.

An oven mitt in the shape of a maple leaf looks incredibly beautiful and original.

Progress:

  1. Draw a maple leaf of the desired size on paper.
  2. Transfer it to felt and cut out three blanks, each of which should be half a centimeter smaller than the previous one.
  3. Separately, cut out a small strip, process its edges and immediately stitch it to the largest leaf, forming a loop.
  4. Place a couple of remaining pieces on top and secure them with pins.
  5. Sew all the veins on the top piece.

Tip: in order for the seams to stand out more, the color of the threads should be contrasting. It is also worth making not one line, but several.

New Year's potholders: how to sew yourself

A simple kitchen accessory will be an excellent gift for loved ones for the New Year holidays. With their help you can emphasize the magical atmosphere. After all, even in the kitchen during this period everything should be a little fabulous and unusual.

What is necessary:

  • white and green fabric;
  • padding polyester;
  • red braid;
  • threads;
  • scissors.

A simple kitchen accessory will be an excellent gift for loved ones for the New Year holidays

Progress:

  1. Cut a couple of circles from white fabric, the diameter of which should be eighteen centimeters.
  2. On a green piece of paper, draw a Christmas tree about eleven centimeters high and cut it out.
  3. Sew a Christmas tree to one of the circles using a zigzag stitch.
  4. Cut a couple of circles with a diameter of about seventeen centimeters from padding polyester.
  5. Place the padding polyester parts and one white one together.
  6. Make several lines, the distance between which should be a couple of centimeters.
  7. Cut a strip of white fabric. Its width should be only three centimeters, and its length – sixteen.
  8. Fold the strip and stitch. The result should be a narrow braid, from which a loop will be made in the future.
  9. Fold the white parts right side inward, and place the newly sewn ribbon between them. Baste it with threads.
  10. Sew all the elements in a circle, leaving only a small hole at the bottom.
  11. Turn the workpiece out.
  12. Sew up the hole.
  13. Iron the potholder immediately.
  14. Baste the red ribbon and stitch along the edge of the product.

How to choose material for tacks

Natural materials such as chintz, cotton and linen are most often used for kitchen accessories.. This is due to the fact that during operation the products come into contact not only with hands, but also with food. This is why the use of synthetic fabrics is undesirable. In addition, synthetic fibers will not withstand high temperatures and the product will quickly become unusable.

Only wear-resistant materials are used as internal filler. It can be felt, drape or batting. Only with the correct selection of all fabrics will the finished product not only please the eye, but also last for a long time.

An excellent accessory that will fit into any kitchen of a real housewife is oven mitts. How to sew oven mitts for the kitchen with your own hands, make patterns, and how can these products be useful in the culinary industry?


Oven mitts will help you avoid burns and injuries when cooking in the kitchen. When a housewife is faced with a hot pot and pan, nothing will save her better than this original product. Oven mitts are a great help when heating up a dish; with their help you can protect yourself from burns when cooking in the oven. And most importantly - by them convenient to use to all family members.

In addition to the fact that potholders are an indispensable accessory in the kitchen, you can approach their production creatively and create a unique potholder at home with your own hands. In order to do this, it is enough to treat the production with soul and give free rein to your imagination. Then the potholder will become not only an assistant in the kitchen, but also will beautifully complement the interior, will bring zest and comfort to your home.

Variety of potholders

The potholder can have a varied appearance, from the classic square or mitten-shaped to the most unusual shapes. A person’s imagination is limitless, and if you include imagination and a good mood in your work, you can create a real work of art and sew a pot holder with your own hands, which no one has ever made before. You can find many options on the Internet, including shapes of animals, and fruits or berries. Potholders may have kind of interesting figures, stars, sun and much more.

Plays an important role in the manufacture of the product selected color, because it must harmoniously match the design of the entire room. Many housewives choose silicone potholders. This kitchen accessory is also popular in a large size, which is convenient for taking food out of the oven.

Types of potholders

There is a classification of tacks according to the features of their application. So, products are divided into:

Single


This type of potholder is different high thermal conductivity and most suitable for small surfaces. They are usually used when using a kettle, pot or frying pan.

Twin


Thermal conductivity this type of potholder is already below. They are used to take oven tray or saucepan. Double mittens are often used on both hands.

In addition, there are potholders with low thermal conductivity, which are used for the largest kitchen appliances.

Necessary materials

If a homemaker is going to make a durable pot holder that won't burn her palms, she'll need two main components. This insulation, which will be located inside the product, and outer layer directly determining the color and shape of the future craft.

We must not forget that sewing potholders is a creative process, for which it will not be enough to do everything according to a certain pattern. Here you need to fantasize and experiment, then the product will become unique and inimitable.

As insulation Usually special materials are used, e.g. felt or batting. If you don’t have them at hand, you can use old unnecessary warm clothing, for example, an outdated coat.

To give external beauty You can use lighter fabrics, for example cotton. Their feature is also protection from heating, melting or fire is impossible. Firstly, this advantage provides the user safety, secondly, thanks to natural ingredients, the fabric is soft and pleasant to the skin of the hands.

Particular attention should be paid pattern. The size of the mitten should cover not only the palm, but also wrist. With its beautifully chosen colors and expressive shape, this potholder is sure to meet your expectations and become a wonderful kitchen accessory.

Step-by-step master class on sewing potholders

To begin, carefully make a pattern for the product.


Place your hand on a piece of paper, outlining four fingers gathered together and a protruding thumb.

When creating a pattern, use your right hand (for left-handers - your left), which you will use to cook in the future.

While outlining your hand, sketch more voluminous, departing slightly from the actual size of the palm. Refine the template by emphasizing it and removing any irregularities.


Take the selected fabric and cut out the area according to the template. In total we do this four times, using regular fabric twice and voluminous inner fabric twice. To give strength and durability to the product, it is recommended to make twice as many patterns from the main fabric.

Potholders come in a wide variety of shapes: round, standard square, in the shape of a berry or mushroom, in the shape of a mitten, and also for two hands at the same time. It’s quite easy and simple to make beautiful hand-made potholders from scrap materials.

Fabrics for potholders should be taken natural, such as linen, chintz, cotton, and so on. It is highly not recommended to use synthetics, despite their cheapness, the quality of such potholders leaves much to be desired. The beautiful appearance of such a product is short-lived, since many should know that synthetics ignite very quickly. And if we talk about safety, then this is definitely the worst choice.

So, we’ve decided on the material, now let’s figure out how to make oven mitts for the kitchen with your own hands.

Patterns and descriptions of sewing beautiful potholders with your own hands

Our first job will be a pot holder in the shape of a cat's paw. First you need to make a pattern.

We select fabrics in advance. Then we place the cut out pattern of the potholder on it and trace with a pencil 0.5 - 1 centimeter more than the pattern itself. This difference will be used to tuck the edges inward when stitching. You will need two main parts - this is the mitten itself. A foot print should be cut out from pieces of fabric of a different color. You will also need any fabric for sealing and inner fabric, it should be cut according to the above pattern.

We study step by step the entire work process

Let's get started with the manufacturing process itself. Since our potholder will consist of three layers: an outer layer, a sealant (any pieces of unnecessary fabric will do) and an inner one, we have all the elements cut out in advance according to the pattern. We put all the parts together in order. First, the outer layer, face down, lay the sealant on it and cover it with the inner layer of fabric. We repeat the same thing in reverse order: inner layer, sealant and outer. Then we cut off the unnecessary protruding pieces and baste with thread. Then we wrap the edges with tape and stitch. You need to make a loop near the hole for the hand to hang on the wall.

There is also such an interesting and unusual option as DIY knitted oven mitts made from fabric. If anyone has ever knitted rugs from fabric strips, they will understand what we are talking about.

First you need to cut the fabric into strips and tie their edges together to create a long thread. Then roll it into a ball for convenience. It is most convenient to use knitwear, as it does not fray.

You can knit using a regular crochet pattern in the shape of a square. This is an easier option for beginners.

The motif is performed in a circle, starting with six airs. loops, then you need to close them in a circle and tie them with single crochets.

As you can see, the whole process consists of repeating chain stitches and single crochet arches. Knit round by round to the desired size. At the end of knitting, the product can be trimmed with a border if desired. Don't forget to make a loop and the potholder is ready.

Making an interesting kitchen product in patchwork style

Let's look at an example of making potholders in the patchwork style, or patchwork potholders, as they are simply called. This is an option for lazy needlewomen, but who always have a certain amount of unnecessary scraps; Even the smallest ones will be useful to us. Do-it-yourself oven mitts in this style look like a mosaic and fit well into any kitchen design with an appropriately selected color scheme.

First we need some scraps. They can be the remains of pillowcases, trimmings from trousers or skirts, an old apron, etc. As well as thermal insulating material, for example batting.

We take a fabric for the base, preferably cotton, size 20*20, and put a piece of paper with five corners in the center.

After this, we take the next piece, which we apply next to the first one face to face. Compare the cuts and sew.

Then turn it back and iron it. Repeat the same with the remaining scraps until the square is filled.