Craft a heart with your own hands from threads. How to make a fluffy heart from threads. Heart of threads and nails

30.09.2019

Today we will tell you how to make an original and romantic gift for February 14 with your own hands. A great option is to make a voluminous heart from threads. Such an ornament can be presented both as a main gift to a loved one, and as an unusual valentine, that is, an addition to a present.

You can make this popular and very beautiful gift for Valentine's Day in just 15-20 minutes. It is very convenient to make several such crafts at once. Volumetric hearts can be used to make excellent hanging decorations or even something like a bouquet. At the same time, you can make all hearts from threads in different colors.

What will we need?

PVA glue or paste
threads of different colors
sequins or any other decor

Tip: for this craft, it is best to take small oblong balls, and not standard round models - it will be more convenient to work with them

How to make a heart?

Sprinkle glitter on paper or any other flat surface in advance - we will apply them already on the finished thread heart.

Inflate two balloons (but not too much, about half), tie them, and then fasten them together.

Pour a little paste or PVA glue into any container.

Take a skein of thread and dip a few centimeters of the material into the glue. Then start wrapping. Avoid sagging in the middle and try to form a heart.

Generously coat the craft with glue; when it dries, it will not be too noticeable - we will decorate our gift by February 14 with sparkles. Winding in a random direction and in several layers.

When you have finished making a heart out of thread, sprinkle glitter on the future gift. You can even just dip it in them. But in order for the decor to be evenly distributed, it is better to pour glitter from a spoon or directly with your hands.

Leave the heart to dry (you can hang our voluminous valentine with a paper clip or clothespin on any stretched thread). When the glue has set, pierce the balls with a needle and gently spread the threads to pull them out.

Volumetric Valentine is ready!

Try to make such a gift for Valentine's Day in several ways: use threads of different colors, change the size of the balls, add interesting decor from beads, beads, rhinestones, etc. This is a great gift for February 14, which is sure to please your loved one. Make a few of these hearts and decorate the room with them by hanging the decoration on a thread from the ceiling. Or insert balloon sticks or wire inside and collect them in a huge gift bouquet.

The desire to surprise others with something and stand out from the crowd is inherent in every person. From an early age, some girls paint their lips with their mother's lipstick to look older than their peers. In adolescence, already expensive parental jewelry and cosmetics are used. But in order to stand out, it is not at all necessary for a girl to hang gold and diamonds on herself. You can offer your daughter..

This master class in the description and photographs will demonstrate the weaving of a beautiful cord from knitting threads using a simple homemade device and making a bracelet out of it. In almost every family, one of the adults knows how to knit. As a rule, they try to teach this skill to their children and grandchildren. But knitting requires perseverance and patience, and they possess these qualities..

Everyone knows the expression “love with all your heart”. This means that you need to give your heart to another person. It is physically impossible to do this, so people came up with symbolic images of hearts to give them to their loved ones. Thinking about what to give a loved one? Let it be a handmade heart-shaped pendant. And for its manufacture, plastic tubes are required, ..

Valentine's Day came to Russia in the early 90s of the last century. Few people know who Saint Valentine is, but the holiday fell in love and fell into the category of informal ones. If you have plans to celebrate February 14 with your loved ones, then there is a great opportunity to use the symbol of all lovers in the table setting - a scarlet heart. Using the origami technique, you can easily fold hearts for...

It is rightly said that it is not the gift itself that is valued more, but the attention. We all want to take care of our loved ones, but we often look for special occasions to do so. Small surprises and gifts do not require solemn occasions at all, they can be given at least every day. You can surprise your loved one by giving him a heart. It is easy to fold it out of paper using the origami technique. Is our..

If a person lives only for himself, then sooner or later he will become lonely. Giving your love to another person has always meant giving him your heart. Therefore, all over the world on Valentine's Day, it is customary to exchange symbolic images of hearts - valentines. There are a huge number of ways and materials for making valentines. One of the options is to do it yourself.

There are many ways to make a heart out of paper, and we offer the simplest one that allows you to quickly make this voluminous craft. If you focus on the step-by-step photos of this master class, then creating such a heart will take very little time. If desired, the heart can also be made in other colors (for example, made pink), however, in our opinion, a red heart will express..

All children love new toys. Many girls love their dolls, they like not only to play with them, but also to dress them up. For some crazy and pears, entire collections of miniature clothes are offered: dresses, blouses, boots, scarves, hats and much more. But it usually costs a lot of money. Therefore, many mothers try to help their daughter make clothes for dolls on their own ...

The article presents a master class with a step-by-step illustrated description of the process of making a tactile toy "Labyrinth" in the form of a starfish from felt and other materials and its pattern. In an effort to develop their baby as best as possible, many mothers select special educational toys for him. Their separate type, namely, sensory or tactile toys, are designed to help the little one..

On the eve of Valentine's Day, the issue of preparing all kinds of decorative ornaments becomes especially relevant, which, of course, should symbolically remind of this wonderful day. Well, what is the symbol of St. Valentine's Day, everyone probably knows, right?! Of course, this is a heart, it is on this day that lovers from all over the world exchange the most diverse hearts in the manner of serving. Well, if you want to give your soulmate a not quite standard heart, then this article will interest you, because today we will show various variations of cute thread hearts. Such a heart made of threads can be a wonderful gift or perfectly fit into a romantic home decor.

It is necessary to take the wire holding the shape, give it the shape of a heart, fixing the ends in the inner folds. Then the resulting workpiece should be wrapped around the perimeter with pink or red threads. After that, you can start creating weaves of threads, you don’t have to try on too much, just throw the thread from one side of the wire to the other. Finally, use the same threads to create a hanging rope. According to this scheme, you can make a whole garland, and decorate it with a window, door or wall.

2. Heart of threads and balls.

You need to inflate two small balloons, fix them at the ends with threads together, then wrap them with matching threads and carefully cover them with PVA glue on top. When wrapping the balls with threads, you need to control the process, and try to adhere to the declared shape in the form of a heart. After the threads have dried, which is about 12-24 hours, take a needle and carefully pierce each of the balls. You pull out the balls through one of the holes and admire the completed work. By the way, after the threads are covered with a layer of PVA glue, the product can be covered with large glosses on top, but this item is optional.

To do this, you need a heart-shaped balloon, inflate it, wrap it with red or pink dense threads, cover the product with several layers of PVA glue on top. Leave to dry for about 12-24 hours, for the convenience of drying, the ball can be put in a jar or glass. Then pierce the ball with a needle and pull it out into one of the holes. Such a filament heart can be decorated with electric garlands, just put a short garland inside, but for this, from below, at the stage of winding the threads, you need to leave a large hole so that it is convenient to place the selected garland in the finished heart.

4. We make a heart from threads and long balls.

Inflate two long balls, tie each of them with the ends together, wrap them with threads, cover with several plentiful layers of PVA glue, leave to dry. After drying, pierce long balls with a needle, and remove them from the thread shell. Then connect the ends of the thread blanks together, as in the photo below, while forming a heart. For strength, the ends can also be glued with PVA glue. The finished heart can be hung on a ribbon, thus decorating a window or chandelier.

5. Volumetric heart made of threads.

Inflate a balloon in the shape of a heart, cut thick threads into short pieces, soak them in PVA glue, and cover the heart balloon on top. Lay the threads not just evenly, but in the form of waves, according to this scheme, it is necessary to completely cover the entire ball. After the threads are dry, the ball can be pierced.

6. Embroidered heart made of cardboard and thread.

Cut out a heart from paper, attach it to cardboard, create punctures according to its outline with an awl or a thick needle. Then, with a thread and a needle, along the prepared traces, we create an embroidery effect, as in the photo below.

7. Heart of threads and nails.

We paint the chipboard sheet with red paint, cut out a large heart from paper, apply the template to the painted panel, fix it with adhesive tape, drive carnations into the board along the outlines of the heart. We take the threads, tie a knot on one of the studs, and begin to lead the threads from one stud to another, and so on until all the nails are involved. Create the number of layers to your taste, a small amount of threads looks equally beautiful, and, on the contrary, a richly wrapped heart.

Another example of a heart made of threads and nails.

Today we showed you how you can make a heart out of threads without any hassle, we think that from the examples presented above you will definitely choose the right idea for yourself. Well, you can simply give a finished filament heart to your soulmate or decorate the premises of a house or apartment with it. A heart made of threads, made with your own hands, will definitely please your soulmate!

The "Decorol" website reminds you that you can subscribe to receive news from us, you can do this through the subscription form located in the sidebar.

Good afternoon - today I have prepared an article on creating KNITTED HEARTS with my own hands - or crochet valentines. In this article, I have collected piggy bank of ideas about what gifts can be knitted for Valentine's Day. And also you will see schemes and patterns crochet hearts. That is, today we will tie a variety of hearts - both small and large - in different knitting techniques (circular, square, asymmetrical, sirloin).

Let me tell you exactly what you will find in this article…

I will show craft options, which use knitted hearts.
I will teach you how to knit the MOST SIMPLE flat heart from thick threads.
I'll show you how to DECORATE simple knitted heart in an elegant valentine.
I will give a master class on creating VOLUME plump heart from threads.
Ladies schemes for crochet heart in the technique of "square + ears.
I'll show you how to tie a heart according to the pattern of knitting "Peacock Feather".
You will also learn how to knit CARPET in the shape of a heart.
And how to knit a box of chocolates in the form of a valentine.

There will be many interesting things.

Gift Options for Valentine's Day

which you can knit with your own hands.

You can knit the SILHOUETTE of a heart with a special knitting technique... that is, we knit an ordinary fabric (pillows or potholders) ... and then in the place specified by the pattern we knit columns-knobs. You can do this with plain threads (as in the photo of the blue pillow), or you can choose different colors of threads to highlight the heart (as in the photo of the lilac-yellow potholder below). The scheme and principle of knitting a pattern in bumps can be found on the Internet.

And here's an idea valentine's day crafts- that is, a red knitted heart can decorate a white postcard. A white crochet heart will stand out brightly on a red valentine card.

You can also knit from knitted hearts hair ornament for little girls. For example, an elastic band with a heart on the side. Or you can crochet a crown of hearts(as in the middle photo). You can also use a simple connected heart decorate a regular hair band. Below I will give many heart patterns that are suitable for this purpose.

You can also knit from hearts picture-souvenir as a gift new settlers, or friends in love. The color of the hearts can be matched to the color of the interior of the room ... For example, if the furniture and textiles of the room are lilac with yellow and eggplant, then the hearts in the frame should repeat this color scheme.

Also, a flat heart knitted with thin threads can become an elegant decor for sewn heart pads. Such a heart can be knitted as a decorative element for decorating a wedding.

Well, now let's start knitting a FLAT HEART ... come on, let's learn ...

How to crochet a small flat heart.

Technique CIRCLE + BINDING.

The simplest heart (in 2 rows) is best knitted from thick threads. The scheme of such a heart is simple - it has only 2 circular rows ... First, we knit a regular chain of 4 air loops. Then we knit single crochets in a circle (we get a flat circle). And we will have the second row shape the heart(sharp tip at the bottom + recess at the top). The recess in the upper part of the heart is formed due to the stitching in this place of the columns WITHOUT a crochet. The pointed tip at the bottom is obtained thanks to 2 air loops.

Such small crochet hearts can be connected in PAIRS along the edges ... and fill the inside with cotton wool. We get a plump valentine heart.

You can also decorate our little flat hearts ordinary EMBROIDERY from knitting threads(stretching them with a regular crochet, that is, embroider flowers without a needle). Or you can decorate knitted valentines separately knitted flower, or cut out from a piece of fleece.

And you can also give a heart crocheted elegance, if each knitting row made from threads of different colors.

You can hang a heart on the window - as a decorative pendant and decorate with crystal beads.

HOW TO DECORATE a heart with a knitted flower.

You can decorate the core of such a flat heart with a connected flower.
First volumetric flower it turns out if on the surface of the finished heart (from the central row, hooking a new thread with a hook) start knitting a bump pattern (right on top of the heart canvas).

Second flower (spiral rose) - is knitted after we have a connected 2-row heart on our hands (as according to the diagram above) ... and then, when we have reached the end, we do not break the thread, but continue knitting ... and knit the THIRD ROW - (this will be the edge row of the heart - roses). This row produces curved BOARDS.

The sides are obtained due to the fact that in the third row we DO NOT ADD the number of columns - but we knit them as much as there were in the second row. And our knitting from flat turns into a BOWL-shaped (like a cup in the shape of a heart).

And when our third side row comes to an end - WE START THE SPIRAL. Namely, after the third row has approached the hole-hollow of the heart, we turn the course of our knitting DEEP into the heart (and continue to knit, picking up the middle knitting columns with a crochet (columns of the second and first rows ... turning knitting in a circle and so bringing it to the middle (in a spiral ).

HOW TO MAKE A CARPET using the flat heart technique.

Having mastered the technique of knitting flat hearts, can be linked fluffy CARPET in the shape of a heart. As a knitting material for such a carpet ordinary threads will not work.

Here we need EITHER thick polyester cord for knitting (google it, many stores sell it) ...

OR you can make the same thick thread yourself- if you buy in a store plain jersey-stretch... and cut a long thread out of it with scissors. Just cut with a zigzag snake - first we cut a strip of fabric along the edge, and when we reached the corner, we turned back and cut again ... we reached the corner again, smoothly turned and cut again ... Get an endless plump knitted cord-strip. Our grandmothers also knitted rugs from it (they also cut rags). If you look closely at the photo, you will see that here the threads for the heart-shaped carpet are made from a cut serpentine knitted cloth.

As I said, it's better to buy one stretchy knit fabric with a slight sheen- the shiny coating applied to the fabric glues the loops of the knitted fabric together, and therefore the cut strip DOES NOT FRINGE along the edges, but retains a neat, even cut. Yes, and the carpet from such overflow jersey turns out to be glamorous and stylish.

The heart shaped carpet is very easy to knit. First, we knit an ordinary flat heart (as in the diagram above). And then, when the heart-carpet is ready, we will make a relief on it (protruding ribs).

So that such ROLLED steps appear on the carpet. It is necessary after the carpet is already tied (without steps yet, just flat), take the thread again .... crocheting it in ANY middle row of the knitted carpet ... start knitting regular single crochets - knit along the entire row - another SURFACE ROW.

yes, knit OVER the carpet along the selected row(as we just knitted a spiral rose over the heart in the paragraph above) - but here we knit not in a spiral, but in a CIRCLE, repeating the shape of a heart with a knitting stroke. Thus, we get one edge-step. And then repeat the same thing in some middle row of our rug.

Here in the photo below ... you can see how, after the finished red heart was tied, a white pattern was knitted on its SURFACE (just hooking (in any row) a white thread and pulling it into a loop ... Here is a similar process on our carpet ... only there we we not only stretch the picked up thread, but also knit a column together with it (with or without a crochet).

Volumetric crochet heart

– MASTER CLASS for beginners.

These are so beautiful plump hearts can be knitted even by a novice master. It looks like a difficult job - but if you hold them in your hand, it immediately becomes clear how it's done. Here I post Master Class, where all the stages of knitting are clearly visible and understandable.

We knit cups-caps (we just knit in a circle, and from the fact that in each circle we add few columns, our circle wraps itself in a cup). We cut the thread in the first cap ... and when the second cap is already tied, we leave the thread ... we bring the caps closer to each other with barrels and begin their GENERAL BINDING in a circle - in a GENERAL CIRCLE around their barrels (without touching the membrane wall).

Gradually we begin the REDUCTION OF THE COLUMNS in this circular row - so that our heart narrows down. When there is already a small hole left below, we fill the valentine with cotton wool and finish knitting.

Hearts connected according to such a master class may not be monophonic, but striped… And they can be made elongated. In order for them to lengthen, you just need to reduce the columns in a circular row not so often ... That is, do the reduction of the columns is not in each row - but through the row.

Volume heart crochet,

knitted in ROW knit.

And here is the principle of creating a crochet heart, which is knitted NOT IN A CIRCLE .. but row after row - from left to right. Two flat swimsuits are knitted, and then folded together and crocheted.

STITCHING OF TWO HALVES occurs regular crochet stitch. Thread under knitting, hook over knitting. We lower the hook from the bottom up THROUGH the knitting - we pick up the thread and pull it to the top of the knitting a little bit so that the head of the hook and the eyelet on it look out. Again we crochet - through knitting down (already in another place, through a column) - we pick up the thread, emerge with a hook with a new loop and stretch it into the one that is already on the hook ... And we repeat the same dive with a hook through the column down - grab the thread and pull it from the bottom up and stretch it into the loop on the hook.

Or you can combine the principle of TRIANGULAR DIRECT knitting - and then tie SEMI-ROUND EARS to the triangle (as in the photo below).

Crochet heart

L-shaped way.

This means that our knitting looks like the letter G, which we constantly knit in a circle, making the letter G thicker and thicker - until it looks like a heart. Here in the diagram below I have 2 stages of the scheme - the beginning and the continuation. To make it clear to you where knitting begins ... and how to continue it.

And also having learned to crochet a FLAT heart, you can knit Here's a valentine's box. In order for the connected flat heart to form BOARDS (wall-boxes), you need ... after finishing the flat upper box part (without breaking the threads), continue knitting in a circle (around the heart) BUT WITHOUT ADDING COLUMNS IN THE FOLLOWING CIRCULAR ROWS ... and then our knitting will begin to bend over wrap the sides …. Choose the height of the sides yourself ... in the photo there are 3-4 rows of columns (each row has the same number of columns - equal to the number of columns along the edge of the upper surface of the heart).

And by the way - in the photo it is connected in an L-SHAPED way - but in fact it doesn’t matter at all how you knit the surface of the cover. That is, you can choose ANY way to crochet a heart (in the photo below we see the usual heart pattern in the form of even rows). The main thing to do is to CONNECT THE BOARDS (the walls of the box).

Also in the same technique (in the form of the letter G) you can tie an OPENWORK holey heart-valentine, with a red ribbon stretched into it.

The diagram below shows that this pattern is almost the same as the top one, only here in each row we do not just sculpt the columns close to each other ... but we do gaps in the form of two air loops And then to such a heart, you can add a LACE BINDING along the edge of the finished heart shape. And stretch the ribbon around the edge.

Hearts in the technique of FRAME KNITTING.

And here is the idea of crochet HEART FRAMES. First we knit regular BIG RING of air loops- and then we tie this ring with single crochets. We do the strapping in such a way that we get a CLOWN from the top in the center ... and from the bottom in the center a SHARP END of a heart.
Hollow it is done with the help of the fact that in this place we knit not an ordinary column, but a connecting one - we just hook it up and pull the thread into the loop, without calling the column.

pointed tip it turns out due to the fact that in this place we knit THREE COLUMNS into one air loop.

If the front-frame consists of SEVERAL rows, then for all these rows GENERAL RULE applies - in the hollow we do LOWERING THE COLUMNS(that is, instead of a cape we make a capless ... or instead of the usual capless we make a tiny connecting column).

= at the bottom for a pointed tip In EVERY row we knit 3 columns in one hole, instead of one.

And you can put a wire inside such a heart-frame. And make a rigid frame for a photo or for a bird.

The wire will be inserted into the knitting immediately at the FIRST STAGE OF WORK.

That is, we immediately we start our knitting NOT WITH AIR ... but immediately with columns... we begin to knit these columns by picking up the hook under the wire. Just like we always hooked the hook under the ring of air loops - only now we don’t need a ring of air loops - instead a ring of wire. It's okay if the dragging during knitting will be jammed by hand - then you will level everything.

By this principle, you can knit any lace patterns - on a wire bent in the shape of a heart ... or in the shape of lace.

crochet valentines

in the SQUARE + EARS technique.

And here is the principle of crocheting a valentine when we first knit regular square with any pattern(albeit just columns as in the photo below) ... and then to this square from two sides we tie semicircular ears.

The scheme of the square and the scheme of the ears can be any ... with tight or holey openwork knitting.

After we knitted first a SQUARE, then one ear, and then the second ear-semicircle ... we can tie the whole heart along its EDGE ... the strapping along the edge can be in the form of simple columns ... or in the form of openwork lace (as in the photo below) .

And here is the option when a garland is connected from such hearts - it can be hung over the fireplace or along the bookshelf ... or along the upper edge of the doorway.

Patterns for knitting such hearts can be very different. Here are the schemes of SQUARES and ears to it. As you can see, pattern patterns can be completely different. And there is only one principle - first we knit a square (according to any pattern) ... and then we tie semicircular ears to it - also according to any pattern of a round napkin ... or invented from my head.

Crochet valentine

in the technique of THREE CIRCLE + BINDING

And here is another simple way - when THREE CUPS fit in ... then they interlock together. And they are tied around - in the shape of a heart.

Instead of three circles, you can connect three flowers.

Also, you can create your own your author's heart from crocheted many different-sized flowers or circles. Here's how. First, draw a large heart shape on a piece of paper - THIS WILL BE A TEMPLATE.

Then collect around the house all sorts of round objects that can serve as a Stencil for us (glasses, round cream lids, jars with round bottoms, etc.). now we we circle these glasses and caps with a pencil inside our drawn heart. Our task is to cover the whole heart with such stencil circles - from small to large.

And then you have to take threads of two or three colors close in shades (pink, red and white - for example). And tie flowers of different colors- we knit a flower with any circular pattern (taken from the patterns of any napkins or snowflakes) - we knit until our round circle is equal in size to one of the circles we have drawn.

Once a knitted circle matched to size with one of the circles drawn on the template - we take the adhesive tape and stick it on our drawing - in the circle where it should be (I advise you to stick the adhesive tape on the template so that you do not get confused which circles are already connected and which ones are not yet).

Valentine napkins

in the technique of FILLET knitting.

Loin knitting is knitting in a straight line (from right to left) - we knit CELL BY CELL ... Cells alternate... empty... or filled with columns. And thanks to this, a drawing is obtained.
It is VERY SIMPLE here ... either an empty cell (three airs) or filled with columns (three columns).

And the patterns for such filet knitting look EXACTLY THE SAME as the patterns for cross stitch. Any two-color cross stitch pattern is suitable as a pattern and for filet crochet.

With a pattern in the form of a heart in loin technique, you can knit a BORDER for a tablecloth or a towel and give it to a friend. It is possible to crochet such a CURTAIN for the kitchen window in the country using the sirloin technique.

You can decorate with fillet knitting a heart-cushion made of fabric. And from it to make a beautiful gift composition in a frame, with roses and a butterfly.

Valentines knitted in the technique of FIGURED knitting.

And the SHARE of the heart (right lobe and left lobe) can be connected in the technique of the pattern PEACOCK FEATHER. That is, among the crochet patterns there is such a fashionable knitting pattern as a PEACOCK FEATHER (or a drop) ... And if we take two of these elements and put them together, we get a valentine heart.

Knitting starts from the tip of the heart ... diverges in a triangle to the sides. And then the triangle is divided into two lobes. Each ear is knitted separately ... first one, break the thread ... then the other.

Can be used as the basis for the pattern the scheme is only the TOP of the peacock feather pattern.

You can crochet valentines in a technique called ZAVITO K. This is when our knitting turns the corner ... and then comes back ...

If using the CURL technique to connect such 4 hearts (or more), then you can fold a napkin out of them.

You can also hang lace hearts on windows. And even add them with pendants.

Crocheted heart with an ASYMMETRIC pattern.

And here is a beautiful design technique for creating openwork crochet valentines. Where the pattern has an asymmetrical shape. Here the direction of knitting is the most unpredictable.

Your knitting the canvas is bent bagel itself, while you knit row by row. And then you leave this half-donut ... break the thread from the top of the bent canvas. AND start knitting from the lower end of the same fabric.. And this time too the course of your new knitting is bent into a steep curl. And then, when the curl is ready, it is sewn with its upper side to the TOP edge of our first half-donut.

And here is another valentine pattern, also an asymmetric crochet heart. Here, too, knitting goes along the course of the curl ... It twists itself, and then flowers or jumper posts are knitted in the middle, which connect the two sides of our bent knitted ribbon.

Like these ones crochet heart ideas I collected in this article. I would be glad if here you found an idea for your crochet valentine.
Good luck knitting.

Olga Klishevskaya, specially for the site

A loved one does not need a lot of time and money.

One has only to turn on the imagination, learn a few secrets of making a souvenir and prepare the necessary materials.

The heart can be made from paper, candy, clay, and it is suitable as a gift for various holidays, whether it's a birthday, Valentine's Day or March 8th.

Here are a few options on how you can make a beautiful heart with your own hands.

How to make a paper heart

You will need:

Scissors

Wrapping or other thin paper

Heart template (can be drawn on cardboard and cut out)

PVA glue

Pencil

How to make papier mache mix

Prepare a bowl, flour, water and some salt. Mix everything to get a paste.

cooking heart

1. Put the heart template on the cardboard and circle it several times to get several cardboard hearts. Their number must be in pairs.

2. Start tearing off small pieces of thin paper, grease them with glue and stick them to cardboard hearts.

3. Glue another cardboard heart to the pieces of paper to end up with a kind of sandwich.

4. Prepare the newspaper, tear it into small pieces and start gluing them to the voluminous heart.

5. Leave the glue to dry.

6. When everything is dry, you can decorate the hearts in any way you like, for example, use acrylic paint, glitter, glue multi-colored buttons, add colorful threads.

How to make a heart out of thread: Celtic necklace

Making such a heart can be tricky at times, but very interesting, and at the end you will have a beautiful heart that can also be used as a bracelet or necklace.

* You will need colored shoelaces or similar ropes.

* Follow the arrows to help you tie the knots correctly.

* To find the correct size, wrap the laces around your neck or arm and cut off the excess.

* For contrast, choose laces in different colors.

* Use two laces as one.

* Try to keep the laces straight for the best effect.

* If the first time did not work out, do not stop trying again and again, and you will definitely succeed.

What can a heart be made of: wire and thread

You will need:

plain or floral wire

Pliers

Scissors

1. Cut off a piece of wire and use pliers to bend that piece into a heart shape. Twist the ends of the wire together.

2. Start wrapping the wire heart with thread. Try to wrap it so that there are no large holes.

* You can also attach a note to the heart.

How to make a beautiful heart: tea bag

Surprise your significant other with a beautiful heart-shaped bag of your favorite tea.

You will need:

Scissors

Heavy paper

tea bags

tea leaves

Tea spoon

1. Cut out a heart from thick paper. It should be large enough to fit a spoonful of tea.

2. Put the paper heart on the tea bag and begin to circle it with a thread and a needle, making stitches. Make sure that there is no place through which tea leaves can fall.

3. Leave some space to fill the heart with tea leaves.

4. Make a tube out of paper and insert it into the hole of the heart and pour tea with it.

5. Pull out the tube and sew up the hole in the heart. Tie a knot and cut off the excess thread.

* You can make a label in the form of a heart. To do this, you just need to use a thread and a needle to connect a tea bag with a paper heart made of thick paper.

How to make a heart out of cardboard and newspaper

You will need:

Scissors

Stationery knife

1. Prepare a newspaper and cut into several long strips.

2. Cut out a heart from cardboard. Using a utility knife, cut out another heart inside the heart. As a result, you will get a frame in the shape of a heart.

3. Twist each strip of newspaper (you can secure the spiral with glue) and start wrapping the spiral around the frame, periodically adding glue for better fixing.

4. It remains only to add a thread or ribbon so that the heart can be hung on a gift.

How to make a paper heart

You will need:

- scrap paper (wrapping paper)

Glue (glue gun)

Pencil

Scissors

1. Draw a big heart on a large sheet of cardboard.

* You can choose the size yourself, the heart can be small.

2. Cut out a heart from cardboard, and cut out another heart from this heart to end up with a frame.

3. Cut out thin strips of wrapping paper.

4. Using a pencil, twist the strips into tubes (diagonally).

5. Cut each tube into smaller tubes.

6. Start gluing each tube to the cardboard heart. The tubes do not have to be the same length.

7. You can stick a ribbon so that the heart can be hung somewhere.

* You can also cut out a heart from red construction paper and attach it to the frame as a decoration.

How to make a voluminous heart

Using ordinary threads and a ball, you can make a beautiful and original heart.

You will need:

Threads (2-3 colors)

Heart shaped balloon

Petrolatum

PVA glue

Ribbons in different colors

Jewelry (decorative butterflies, beads, palettes, etc.)

1. First you need to inflate a heart-shaped balloon.

2. Now you need to lubricate the ball with a thin layer of petroleum jelly.

3. Apply PVA glue on top of the Vaseline and begin to gently wind the thread around the ball. * If necessary, you can lubricate the thread with an additional layer of glue during the winding process.

4. The ball must be hung up and the glue left to dry for a day.

5. When the ball has become hard, the ball needs to burst and pull it out of the frozen threads with a hook.

6. It remains to decorate the heart of threads to your liking.

How to make a candy heart

Option 1

You will need:

Thick cardboard

Candies

1. Using scissors or a utility knife, cut out a heart from cardboard and cut another one inside this heart to make a heart-shaped frame. It is worth noting that the width of the frame should be approximately the same as the width of the candy.

2. Start attaching the candies to the frame. You can do this with the help of threads - take two sweets and tie them with threads, tying the thread to the ends of the candy wrappers on one side. This should be done with all sweets.

3. Now you need to put the whole structure on a heart-shaped frame, and tie the candy wrappers on the other side.