Knitted Christmas tree for champagne crochet. Knitted cover for a bottle of New Year's champagne. How to make a tight bottom

Usually Christmas trees from the side look at people sitting at the festive table, having fun, pouring toasts and wishes in honor of the New Year. The green beauty is the main character of the holiday, and her place is in the center of the table.
Do you think it is impossible to place it on the table?.. Maybe! If you put a crocheted Christmas tree on the neck of a bottle of champagne.
Work is within the power of anyone who has the skills of crocheting at least at a minimum level.
To work, you will need green yarn and a hook that matches it in thickness. In this case: yarn - wool 50%, hook number 3. We collect 5 air loops (ch), connect them into a ring. In the first row, we knit single crochets (st.b / n), 2 in each of the dialed ch. The second row is double crochets (st / n), in the course of knitting we evenly add loops so that the circle turns out to be even. (Photo 1)

We continue knitting in a circle. The third row (and all other odd ones) - st.b / n. The fourth row (and all other even ones) - senior / n. We knit rows without adding loops - we get the walls of the cylinder. Where the neck of the champagne bottle begins to expand, turning into "shoulders", we begin to add loops. We have something similar to a skirt. The last row is finishing: st.b / n, 5 ch, st.b / n, 5 ch. and so on until the end of the row.
This is the trunk of a Christmas tree. (Photo 2)

Now let's start creating lush needles. We collect a lot of v.p. To find out how many of them specifically, we do a fitting: we wrap the trunk of the Christmas tree in a spiral with a chain of air loops, from the top to the skirt. I got about 200 vp. When the set is done, we knit them with st.b / n. (Photo 3)

In the next row we knit: st.s / n, 5ch, st.s / n (we stick the hook into the 3rd loop from the previous st.s / n, skipping two loops of the base). Again 5vp, st.s / n and so on until the end of the row. (Photo 4)

We knit the air loops of the previous row with st.b / n. To do this, you can take a green thread, but a different shade. (Photo 5)

The needles are ready, it remains to sew them with neat stitches to the trunk (with a hem-type seam). (Photo 6)

The tree needs to be decorated. As decoration, you can use old beads, beads, other tinsel. (Photo 7)

We put the Christmas tree on a bottle of champagne. We put a star on top. Fluffy New Year's beauty will be the main decoration of the festive table. (Photo 8)

Join our group "Vkontakte" vk.com/site where you will be the first to know about our new master classes, and other needlework masters.

To make a Christmas tree, we need: green yarn about 80 g (I have NAKO Bambino 50g / 130m, 25% wool, 75% acrylic); red yarn for a star; filler; hook number 3; large beads, glue.

Description of knitting Christmas tree:

With a green thread, we collect a chain of 70 air loops - v.p. (the number of loops must be a multiple of 7), we close in a ring.

1 row: Three ch. for lifting, double crochet (CCH) in each loop.

2 row: Three ch. to lift and begin to tie the CCH of the previous row, do 7 CCH, 1 ch, again 7 CCH, tying the next CCH of the previous row; a feather is obtained; then we skip 5 dc and tie the dc of the previous row - 7 dc, 1 ch, 7 dc, tying the dc of the previous row. So we continue to the end of the row, at the end of the row we make a connecting column in the ch. lifting chains; I got 10 feathers.

3-8 row: we knit similarly to 2-3 rows.

9 row: in this row we make decreases, but attention! Feathers should remain in a checkerboard pattern; in the interval where there are three feathers, I knitted CCH not in each loop, but through one, so twice. You should get 56 CCH.

10 row: we knit as the second row, the number of feathers is 8.

11.13, 15 rows: 56 CCH.

12,14,16 rows: 8 feathers.

17 row: we make decreases, do not forget about the order of the feathers. It turns out 42 CCH

18, 20, 22, 24 rows: 6 feathers.

19, 21, 23 rows: 42 dc.

25 row: we make decreases 28 CCH.

26, 28, 30, 32 rows: 4 feathers

27, 29, 31 rows: 42 dc.

33 row: we make decreases 27 CCH.

34, 36, 38, 40 rows: 3 feathers.

35, 37, 39, 41 rows: 27 CCH, we break the thread.

We decorate the Christmas tree. I glued beads to the top of each feather.

Making a star we take a red thread, we collect 5 ch, we connect it into a ring.

1 row: 10 sc knit in a ring;

2nd row: 15 sc

3rd row: 20 sc.

We knit two circles of the desired size, it all depends on the thickness of the yarn.

We divide the number of loops of the last row of the circle by five, and in these places we connect with two ch. both circles; there are five holes. Then we tie these holes, evenly decreasing to the top, so we knit 4 tops and fill them with filler.

We knit the fifth peak, gradually filling it. It turned out to be a massive star.

Sew a star to the top of the Christmas tree.

We fill the Christmas tree with synthetic winterizer, knit a circle equal to the circumference of the bottom of the Christmas tree and sew it on. Already in the process, I put a cardboard box so that the Christmas tree was stable.

The beautiful Christmas tree is ready to celebrate the new year. All with the upcoming!

New Year is always a holiday. Children and adults are waiting for this holiday, they are preparing for it in advance: they decorate windows, put up Christmas trees, prepare gifts and think over the festive menu. I want everything to be magically unusual on this night. Therefore, even ordinary things need an unusual decoration, and even more so New Year's champagne.

I suggest you decorate champagne for the new year with your own hands by tying the Christmas tree.

A banal bottle of champagne in such a case turns into a useful and unusual New Year's gift - on the one hand, a symbol, on the other hand, there is something to fill the glasses for the chiming clock ... You can put this on the festive table and take it with you as a guest.

How to tie a Christmas tree for New Year's champagne?

And such a tree fits in quite simply. It is better to use hook No. 3-4. One Christmas tree takes a little more than half a skein of yarn.

Crochet Christmas trees start with a chain of air loops.

We knit a chain of the required length, trying it on a bottle of champagne.

We connect the chain into a ring. We knit Christmas tree - case around single crochet constantly trying it on the bottle.

Scheme There is no crochet as such. The number of loops and rows depends on the thickness of the yarn and the density of knitting. If the cover is tight on the bottle, then add the required number of loops in a row, knitting two columns on one loop of the base.

I specifically knitted a sample of simple threads to make it clearer, since on yarn "grass" I can not see anything.

If the cap is too loose on the bottle, then subtract

Thus, we knit our Christmas tree of the required height, constantly trying on her on a bottle of champagne.

Closer to the neck we start diminish the number of loops in a row, knitting columns through one loop of the base.

Having tied the whole bottle, we reduce the number of loops to a minimum and close the last loop, pulling the thread through it.
Can top our knitted Christmas tree is fancifully bent.

This will require elastic wire approximately 10-12 cm. Gradually reduce the number of loops on the top of the Christmas tree up to 3-4 loops. Insert the wire into the hole. From the wrong side, we bend one end of the wire with a hook and put a small piece of cotton wool or synthetic winterizer under it.

We bend it 90 o so that this hook rests on the cork of the bottle in a half ring. If you remove the cover, it looks like this:

And here it is from the front side.

We continue to knit the cover, tying the wire, knitting loops on both sides in a circle.

If, due to the synthetic winterizer, the top is higher than the cork bloated, it can be pulled off a little by stitching it with a matching thread through and through in several places.
To our bottle cover couldn't fly at the most inopportune moment, and the bottle did not crash on the floor, below it is better to do strings.
In the intervals between the loops we thread with a hook tape.

We tighten the ribbon and tie it with a double bow. Now a bottle of champagne can't fall out from a knitted case.

Let's move on to the most interesting and creative process - decoration knitted Christmas tree.
The Christmas tree can be decorated with large beads and small bows tied on a fork.

A spectacular champagne case will delight guests, and will also be a great gift. The bottle turns into an elegant Christmas tree.Crochet bottle case. The main knitting is “crocodile skin”. Knitting is voluminous, takes a lot of yarn, but looks very impressive.

Materials: green yarn "YarnArt Baby" (50 gr = 150 m) - a little more than 1 skein.

The cover is crocheted 2.5 mm.

Master Class:

Legend:

VP - air loop

С1Н - column with 1 crochet

RLS - single crochet

Decrease - knit 2 columns of the previous row together

Crocodile knit. Every 2 rows of the pattern give 1 row in height, since the base mesh (1st row) is knitted first, along which the 2nd row of “scales” is then knitted. As a result, “scales” are located outside, and a grid is visible from the wrong side of the work.

For the sample, we collect a chain of 13 VPs.

1 row: 3 ch lifts (replace 1 dc), 1 dc in the fourth loop of the hook, * 2 ch, 2 dc in the third loop *

It turns out a grid (2 columns - a gap - 2 columns - a gap, etc.)

2 row:

— we knit 5 C1H, inserting the hook into the hole between the last two columns of the previous row as if we were tying the last column on the side of the grid (see photo # 1 and photo # 2).

- 1 VP (this will be the middle of the "scale")

- we knit 5 С1Н, tying the penultimate column already (see photo No. 3 and photo No. 4).

Thus, we tie a pair of columns almost in a circle (as if from 3 sides). One "scale" is ready.

Skip the next 2 double crochets.

And we tie the next 2 columns in the same way as the first pair of columns (you do not need to knit any lifting loops).

According to this principle, “crocodile skin” is knitted.

2. Case: you need to dial the number of VP (bottle circumference). I scored 64 VP. We close the chain in a ring, then we knit in a circle.

We knit 13 rows of "scales" (26 rows in total).

Tip: You can experiment with melange yarn. Color transitions will look very impressive.

1 row: * 5 VP, 1 RLS (between two columns of the grid of the previous row) *

2 row: 4 RLS along the arch (to its middle), * 4 VP, 1 RLS in the middle of the arch *

3 - 5 row: 2 RLS along the arch (to its middle), * 4 VP, 1 RLS in the middle of the arch *

6-9 row: 2 RLS along the arch (to its middle), * 3 VP, 1 RLS in the middle of the arch *

10 row: 2 RLS along the arch (to its middle), * 2 VP, 1 RLS in the middle of the arch *

11 - 16 row: 1 RLS along the arch (to its middle), * 2 VP, 1 RLS in the middle of the arch *

You can try to knit the mesh with silver yarn, so the cover will look like a champagne bottle in color. This is what the top looks like. This is how the underside of the cover looks like (the base is visible - the mesh).

Treat others with a beautiful and original gift!