Hospitals 

Jumper for women from angora to knit with needles. We knit products from angora. Mohair sweater with lace trim

The wavy pattern on the pullover goes well with the light coral shade of the yarn. Undoubted success for your spring / summer collection.

Dimensions: 34/36, 38/40, 42/44, 46/48, 50/52

You will need: 50 (75; 100; 100; 125) g of bright yellow No. 0453 yarn Anny Blatt Angora Prestige (100% angora, 125 m / 25 g), 50 (75; 75; 100; 100) g of dark red No. 0494 yarn Anny Blatt Muguet (100% polyamide, 100 m / 25 g), 250 (300; 350; 400; 450) g ​​red-orange # 0453 Anny Blatt Victoria yarn (100% polyamide, 100 m / 50 g), knitting needles # 4 ...

Garter stitch: persons. and out. R. - persons. P.

Front surface: persons. R. - persons. n., out. R.-out. P.

Fantasy pattern: knit according to patterns 1-5. In out. R. knit according to the pattern or according to the designations. In a fantasy pattern, there should always be 2 yarns for 1 double broach.

Density of knitting. Fantasy pattern: 22.5 p. And 36 p. = 10 x 10 cm.

BACK AND FRONT: with Victoria thread, dial 90 (100; 108; 118; 130) p. and tie 4 p. garter stitch. Continue * 2 р. thread Angora, 2 p. thread Muguet, 2 p. thread Angora, 6 p. thread Victoria * as follows: chrome, 88 p. fancy pattern according to scheme 1, chrome. (chrome, 1 p. faces. smooth surface, 96 p. fancy pattern according to the scheme 2.1 p. faces. smooth surface, chrome; chrome, 106 p. fancy pattern according to the scheme 3, chrome; chrome., 116 p. . fancy pattern according to scheme 4, chrome .; chrome., 128 p. fancy pattern according to scheme 5, chrome.). After 36 cm from the typesetting edge for armholes, close on both sides in each 2nd p.: 1 x 3 p., 1 x 2 p., 1 x 1 p. (1 x 4 p., 1 x 3 p. 1 x 2 p.; 1 x 4 p., 2 x 3 p., 1 x 2 p.; 2 x 4 p., 2 x 3 p., 1 x 2 p.; 2 x 4 p., 3 x 3 p., 1 x 2 p. And 1 x 1 p.) = 78 (82; 84; 86; 90) p.

After 55 (56; 57; 58; 59) cm from the typesetting edge, close on both sides 14 (16; 17; 18; 20) sts for the shoulders and set aside the remaining 50 sts of the neck.

SLEEVES: with Victoria thread, dial 50 (50; 52; 54; 54) p. and knit 4 p. garter stitch. Continue with a fantasy pattern according to scheme 2, starting and ending with 1 chrome, then the 1st (1st; 24th; 23rd; 23rd) p. Of scheme 2 as follows: * 2 p. thread Angora, 2 p. thread Muguet, 2 p. thread Angora, 6 p. thread Victoria *.

At the same time, for bevels, add sleeves on both sides in each 10th p. 8 x 1 p., In each 8th p. 2 x 1 p. (In every 8th p. 6 x 1 p., In every 6th p. 8 x 1 p.; In every 6th p. 16 x 1 p.; In every 6th p. 12 x 1 p., in each 4th p. 6 x 1 p.; in each 6th p. 6 x 1 p., in each 4th p. 15 x 1 p.) = 70 ( 78; 84; 90; 96) p.

After 29 cm from the typesetting edge for the okat, close the sleeves on both sides in each 2nd p. 1 x 2 p., In each 4th p. 5 x 1 p., In each 2nd p.: 17 x 1 p., 1 x 2 p. (In each 2nd p. 1 x 2 p., 28 x 1 p.; In each 2nd p. 2 x 1 p., 25 x 1 p., 2 x 2 p.; in each 2nd p. 1 x 3 p., 2 x 2 p., 24 x 1 p., 1 x 2 p. , 1 x 3 p.; In each 2nd p. 1 x 3 p., 2 x 2 p., 21 x 1 p., 4 x 2 p. And 1 x 3 p.). Close the remaining 18 p.

ASSEMBLY: perform one shoulder seam. On the deferred 100 p. Of the neckline, knit with Victoria thread 2 p. persons. satin stitch, close p. Run the second shoulder seam. Sew side seams, sleeve seams and sew on sleeves.

A warm fluffy sweater should be in every woman's wardrobe. Cozy mohair sweaters go perfectly with skirts, trousers and jeans. There are many models of women's knitted pullover. Patterns for this are selected very different, both embossed and openwork. Since mohair is a rather fluffy yarn, it is better not to mess with complex patterns.

Firstly, you can easily make mistakes in the knitting process - after all, due to the available fluff, beginners may not see the loops.

Secondly, the pattern may turn out to be so "tricky" that you will waste your time - in the end, the openwork embodiment will simply not be seen.

A little about yarn

Mohair is considered the thinnest and warmest yarn, most suitable for women's sweaters and blouses. This yarn is made from wool of angora goats. Special equipment makes fine and high-quality yarn very easy to use. Things made from this material are very warm, soft and beautiful. Even an inexperienced needlewoman can knit a mohair sweater - the models are easy to work with and do not require special skill. For a start, it is better to use simple patterns and more simplified models - without tying the sleeves, fitting and other additions.

Simple mohair sweater




To knit a women's sweater, you need mohair yarn - you can use it with the addition of wool or polyamide. Knitting needles # 5 are recommended for mohair yarn. Knit a sweater with a stocking knit, since the needles are thick and the yarn is thin, you get a sparse, almost openwork knit.

To get a product of size 48 (taken as an example), you need to dial 80 loops for work. If you plan to get a sweater of a larger or smaller size, then the loops should be added or subtracted, respectively. Knitting starts from the bottom of the garment. Work should be done according to this description:

  1. Cast on 80 loops for the front and make an elastic 6 cm wide with a 1x1 pattern, that is, alternate purl and front loops. Then continue to work with hosiery: alternate the front and back rows. They knit the back to a height of about 57 cm - this is the length from the bottom of the product to the neck - the sleeve will be deflated, so you will not need to knit the armhole line.
  2. Make a notch for the neckline. To do this, close the center 8 loops and continue to knit the left and right sides separately. For rounding, make a decrease in the knit from the side of the neck. To do this, from the front side through a row, decrease two loops at the same time (close them or tie them together). This is done three times, and the remaining loops are closed. The height of the front shelf should be about 64-65 cm.
  3. The back of the product is knitted in the same way as before. Only the rounding is done in a slightly modified way - first, the central 12 loops are closed, and then three more times, one loop on both sides of the neck.
  4. Sleeves. Cast on 32 loops and make an elastic band 5 cm. In the last row, increase the loops by adding them from the broach between the loops - in total, increase by 24 pieces. Then knit with knit stitch, remembering to add loops on both sides of the sleeve to create a bevel. This is required 13 times in every fourth row. Then you need to add 4 times, one loop after each row. The length of the sleeve is approximately 47 cm. Tie the second sleeve in the same way.
  5. When all the parts are ready, they should be sewn together. You need to start by stitching the back and front. Then sew the sleeves and sew them into the finished sweater.
  6. Tie the neck, or crochet, or knitting needles. Cast on the circular knitting needles loops around the neck and knit 4 rows with an elastic band, then close them.

The finished product from mohair does not require steaming with an iron, otherwise you can harm the villi, and it will not "fluff" well. To even out the garments, they can be soaked in cold water and spread out on a dry towel. Let the parts dry and sew them back together.

Openwork sweater



Women's fluffy sweaters can be openwork. Such work can be performed by craftswomen with extensive experience in knitting without problems and long calculations. An openwork sweater made of thin mohair will be very light and delicate, but it will not lose its ability to retain heat. To get a product of size 44, you will need 250 g of yarn and thin needles No. 2.5. For work, only two patterns are used - for the elastic and the main pattern. Elastic band - it will be at the bottom of the sweater, on the sleeves and neckline. The pattern is performed by alternating 2 front loops and one purl.

An openwork pattern is the main pattern that the entire product is knitted with. It consists of a rapport of 7 loops. Knits in the following sequence:

  • 1 row: make a double broach - remove 2 loops and stretch one of them through both, front, yarn, front, yarn, front, simple broach - remove one loop and pull the next loop through it.
  • Knit all odd rows with purl loops.
  • 3 row: double broach, yarn, knit 3, yarn, simple broach.
  • 5 row: front, yarn, simple broach, front, double broach, yarn, front.
  • 7 row: knit 2, yarn over, knit 2 loops together, yarn over, knit 2.
  • Start rapport from row 9 over again.

Sweater knitting technology is presented as follows:

  1. Back. Cast on 140 stitches and tie 2 cm with elastic. Then knit with an openwork pattern to the armholes for the sleeves. Make it by decreasing the loops 2 loops 2 times and once remove one loop. Then you should also knit 18 cm and close all the loops. If there is no experience or the pattern seems too complicated, you can not do the characteristic knitting of the armholes.
  2. Front. Tie the canvas in the same way, making the armholes. There should be 130 stitches left. To knit the neckline, close the central 28 loops, and then make roundings on both sides of the neckline by decreasing 3 loops at a time, simultaneously through a row and 5 times by 2 loops. Tie in front to the length of the back and finish with the closure of the loops.
  3. Sleeves. Cast on 60 loops, make an elastic band and knit with an openwork pattern, adding loops in every sixth front row. The sleeve should be made by decreasing the loops through a row 3 times, 2 loops each and 15 times one at a time. Tie to a height of 15 cm and close the remaining loops.
  4. Assembly. Pre-moisten the details and lay out on a towel or blanket. Dry and sew. First, the shoulders should be sewn, then the sleeves should be sewn on and all the side seams should be sewn. Cast on circular knitting needles around the neckline and tie with elastic. The sweater does not require subsequent steaming with an iron.

Knitting allows a woman to bring her ideas and fantasies to life. All her works will be in a single copy, which means that it will allow her to be fashionable and original in her outfit. Mohair products look great because they are warm, lightweight and very comfortable.






Mohair sweaters also benefit from their lightness. If you have noticed, even in the above descriptions, a rather small weight of the yarn necessary for the embodiment of fantasy is indicated - only 200-400 g. Moreover, despite their lightness, mohair pullovers are quite warm - they are not inferior to products made from real wool. Mohair is soft and, unlike the same wool, does not prick at all, so the products are perfect for people with sensitive skin.


Fashion Detail: wide boat neckline, the depth of which can be changed.
The size 42 (46). The differing data for the larger size are indicated in brackets (the pattern is given in Fig. 2)
Material: 300 (350) g
Patterns:
- front surface
- openwork according to the scheme
- elastic band 3x3
Back. Cast on 74 (84) loops on the needles and knit an even fabric with the front stitch. After 27 cm from the bottom edge of the part, go to the openwork pattern and knit another 6 cm.Then, for the side bevels of the armholes, reduce along the edges of the canvas 1 p. In each row 4 times through a row - 10 times. When the height of the knitted fabric reaches 43 cm, leave the loops of the last row (there are 46 of them on the knitting needle) and reshoot on pins, break the thread.
Front tie like a back.
Sleeves. Cast on 54 stitches on the knitting needles and knit with the front stitch 40 cm.Then go to the openwork pattern and knit another 6 cm, then proceed to the design of the bevels. Perform them as on the back. Leave the stitches of the last row (26) open and re-pin. Tie the second sleeve in the same way.
Assembly. Join the back and front with sleeves along the raglan lines. Then complete the side seams and sleeve seams. Remove the open loops along the neckline from pins to knitting needles and knit a 10 cm high bar with an elastic band in a circle. Close the loops of the last row in a straight line, without tightening. Bend the bar to the wrong side and carefully sew on the base. The neckline will look "branded" if you arrange it like this: fold the placket over the front side of the sweater, stitch open loops along the base of the placket. You can insert a very thin, color-coded hat elastic inside the strip.
Suzanne



The above calculation of the loops, thanks to the free silhouette of the pullover, is suitable for three sizes.
You will need: yarn (75% mohair, 25% polyamide, 80 m / 25g) - 425 g yellow-pink; knitting needles number 4.5; short circular needles number 4.
Elastic: alternately 2 facial, 2 purl.
Front surface: front rows - front loops, purl rows - yenan loops.
Knitting density: 18 px 25 p. - 10 x 10 cm.
Back: dial 146 sts and knit 3 cm with an elastic band, continue working with the front satin stitch. For narrowing, in the 7th p. knit the front surface of the 29th and 30th stitches together with the front, 117th and 118th stitches together with a tilt to the left (= 1 st. remove as in front knitting, 1 st. loop), mark the resulting loops. These decreases (the marked loop and the previous, respectively marked loop and the next one knit together) repeat 22 times in each next 6th row = 100 p.After 60 cm from the bottom edge of the part, close on both sides for armholes 1 time 3 p., 2 times 2 p. and 3 times 1 p. in each 2nd p. = 80 p. Knit straight. After 78 cm from the bottom edge of the part, close the middle 26 points for the neckline and finish both sides separately. To round off the cutout, close at every 2nd p. 1 time 3 p. And 1 time 2 p. Then close the remaining 22 p. Of the shoulder.
Front: knit like a back, but only after 58 cm from the bottom edge of the part for the V-neck, divide the work in the middle and finish both sides separately. To bevel the cutout, subtract alternately in every 2nd p. and the next 4th p. 18 times 1 st. After 80 cm from the bottom edge of the part, close the remaining 22 sts of the shoulder.
Sleeves: dial 38 sts and knit faces. satin stitch. For bevels, add 1 pt on both sides 18 times in each 4th p. = 74 p. At a height of 32 cm, close on both sides for an okat 1 time 3 p., 1 time 2 p. And 3 times 1 p. In each 2nd p., 5 times 1 p. In each 4- m., 1 time 1 p., 1 time 2 p., 1 time Z p., 1 time 4 p. and 1 time 5 p. in each 2nd p. Then close the remaining 18 points. For the shuttlecock, dial 38 points along the bottom edge of the sleeve and knit with an elastic band (start and finish with an edge loop). At a height of 2 cm in each purl, add 1 p. (= 47 p.), At a height of 3 cm in each front track, add 1 p. (= 56 p.), At a height of 4 cm in each purl, add 1 p. (= 65 p.), at a height of 5 cm in each front track, add 1 p. (= 74 p.). Knit in a new rhythm - alternately 4 persons, 4 out. Tying a shuttlecock 10 cm wide, close the loops.
Assembly: perform seams. Sew on the sleeves, slightly seated. For the collar, dial 119 sts along the edge of the neckline and knit 2 p. On circular knitting needles. facial and 1 p. out. loops, while in the 1st and 2nd p. in the middle of the front, knit 3 sts together, as well as in the 3rd p. close the middle loop of the front = 114 p. Tie 2 more p. front satin stitch and 14 cm elastic, then close the loops.
Verena 1995-11

Saturday, December 15, 2007


You will need: 750 (800) g of beige Belisana yarn (70% royal mohair, 15% wool, 15% polyamide, 115 m / 50 g); knitting needles # 3, # 7 and # 9; long circular needles No. 9.
Front surface: persons. R. - persons. n., out. R. - out. P.
Patent pattern, persons. and out. R.(odd number of loops).
1 row (out. P.): Chrome., 1 person., * 1 p. Remove with a crochet as out., 1 person., Repeat from *, chrome. 2 row: chrome, 1 p. Remove with a crochet as out., * Knit a loop with a crochet together., 1 p. Remove with a crochet as out., Repeat from *, chrome.
3 row: chrome, knit a loop with a crochet together, * 1 p. Remove with a crochet as out., Knit a loop with a crochet together, repeat from * chrome. Repeat 2nd and 3rd p.
Patent pattern, circular p.(even number of loops).
1 circular row: * 1 p. Remove with a crochet as out., 1 out., Repeat from *.
2 circular row: * knit a loop with a crochet together., Remove 1 p. With a crochet as out, repeat from *.
3 circular row: * 1 p. Remove with a crochet as out., Knit a loop with a crochet together with out., Repeat from *. Repeat 2nd and 3rd p.
Density of knitting. Persons. smooth surface, needles number 7: 11-12 p. and 15 p. = 10x10 cm; patent pattern, needles No. 9: 9 p. and 18 p. = 10x10 cm.

Attention! Knit jacket with thread in 2 additions.
Back: on needles No. 7, dial 59 (67) sts and knit 1 out. R. purl, then knit faces. satin stitch, closing to fit on both sides in every 10th p. 3x1 p.; for this at the beginning of the row after the chrome. remove 1 p. as persons., 1 persons. and stretch it through the removed loop; knit a row to the last 3 sts, knit 2 sts together, chrome. = 53 (61) p.
At a height of 28 cm from the typesetting edge, add 1x1 p. On both sides, then in each 8th p. 2x1 p. = 59 (67) p. At a height of 46 (44) cm, close on both sides for armholes 1x3 p., Then in each 2nd p. 3x1 sts = 47 (55) sts. At a height of 62 cm from the typesetting edge for the neckline, close the middle 23 sts directly and on both sides of them after 2 r. another 1x2 p. Simultaneously, at a height of 64 cm, close on both sides for shoulder bevels in each 2nd p. 2x5 sts (2x7 sts). Close all loops at a total height of 66 cm.
Left shelf: on needles No. 7, dial 4 (8) sts and knit 1 out. R. purl, then knit faces. satin stitch, while for the front rounding from the left edge in each 2nd p. dial again 1x3, 7x2 and 4x1 p. Simultaneously close from the right edge to fit in every 10th p. 3x1 p. = 22 (26) p. At a height of 28 cm from the typesetting edge, make a side bevel and at a height of 46 (44) cm tie the armhole, as for the back, and at the same time, at a height of 42 cm, reduce the neckline 1 x 1 p. then in every 4th p. 8x1 sts. To do this, knit a row to the last 3 sts, knit 2 sts together. and chrome. At a height of 64 cm, tie the shoulder bevels, as for the back.
Right shelf: knit in mirror image. To reduce the bevel of the neckline after the chrome. remove 1 p. as persons. 1 persons. and stretch it through the removed p.
Sleeves: on needles No. 9, dial 39 (43) p. and * knit with a patent pattern 11 cm = 20 p. then knitting needles number 3 2 cm faces. satin stitch = 6 p., from * repeat 3 times, finish the work with needles No. 9 with a patent pattern. Face stripes. Smoothing always start knitting from the seamy row and finish with the front row. At a height of 59 cm, close 1x3 sleeves on both sides for an okat, then in each 2nd p. - 1x2, 7x1 and 1x2 sts. After 70 cm from the typesetting edge, close the remaining 11 (15) sts straight.
Assembly: straighten the parts, slightly moisten and let them dry. Sew all seams, sew on sleeves. For the strap, dial 252 (266) sts on circular knitting needles: along the lower edge of the back - 42 (48) sts, along the roundings - 25 (29) sts each, along the straight front sides - 26 sts each, along the bevels of the neckline shelves - 42 sts each and along the neckline of the back - 24 sts. Knit with a patent pattern in circular rows of 18 cm, then close all loops freely.
Attention! The bar can also be knitted from 2 parts of the faces. and out. R. To do this, begin to dial the loops from the bottom of the middle of the back and end in the middle of the neckline of the back (127 (135) sts for each plank). Sew the sides of the strips; perform the seam at the bottom of the back from the inside out, along the neck of the back - from the faces. sides.

The variety of shapes and colors of knitted jackets makes it possible for every woman to choose the perfect model that will transform the image and emphasize the best aspects of her appearance. The incomparable angora cardigan is in great demand and, thanks to its aesthetic properties, allows you to create stunning bows.

The peculiarities of the material are extraordinary softness, tenderness of the pile and the ability to keep warm O. The fiber is obtained from the hairs of an angora rabbit with long fluffy hair. For decades, plastic, elastic and multifunctional angora wool has been used, from which clothes, textiles and accessories are sewn.

Features of a knitted product

In every woman's wardrobe there is a place for comfortable knitting or crocheting. Warm, soft and comfortable knitted angora cardigan attracts with high technical performance, authentic quality and stylish design. This product perfectly keeps its shape, adds femininity and grace, emphasizes the originality of the external appearance.

Depending on the purpose of the product, one or another knitting method and certain patterns are used. Samples are knitted in satin stitch if they are intended for study, work or official events. Openwork inserts on the straps or back, patterns on the sleeves or in the neckline are added to elegant patterns. Leaves, bumps, honeycombs, columns accentuate the style of the jacket and provide it with conciseness, therefore such patterns are acceptable for street looks and classic styles.

Braids, embossed and convex patterns add splendor and volume to knitted patterns. Loose cardigans with fancy patterns in a casual style are perfect for everyday wear and attending social gatherings. Urban grunge accepts garter-knit jackets with textured and fan-shaped patterns.

Models

A variety of styles, shapes and models makes it possible to choose a sample that fits perfectly into a woman's image and style. A business look will help to create a women's angora cardigan knitted with a single piece of fabric. It can be sleeveless or with raglan sleeves. For everyday wear, jackets with zippers or buttons of any length are useful, and for a holiday you can wear an asymmetrical pattern with wide cuffs.

They wear lilac, coffee, beige, dark gray clothes for study and work. Business style will allow you to create melange patterns, and for urban “grunge” a white, emerald jacket of any length and shape is suitable.

Fashion looks

When creating fashionable images, you should listen to your inner intuition, the advice of stylists and take into account everything to the smallest detail. The appearance should correspond to fashionable preferences, attitudes, mood and taste preferences. If you determine the purpose of the ensemble and take into account the peculiarities of your appearance, then you will easily find out what to wear with a woolen jacket.

There are many options. Cropped pattern with pockets and hood can be worn with any sportswear... Luxurious long is appropriate to combine with elegant business items. A floor-to-ceiling pattern will create a perfect match with elements of classic style. A simple knit mid-thigh jacket can be paired with streetwear.

When combining things, it is important to take into account the texture of the fabric and their style direction. A light angora cardigan with openwork flowers will harmoniously combine with jeans, a viscose sundress,. A fluffy cardigan with voluminous braids will go well with things of a simple and restrained cut - tight-fitting silk blouses, fitted crimplen dresses, leather skirts of the optimal length. A sports jacket can be combined with a cotton T-shirt or T-shirt, jersey trousers or denim shorts. An elegant jacket made of blended yarns of optimal density is harmoniously combined with an acrylic dress, a viscose sundress or a drape skirt.

Shoes and accessories

Each element of the ensemble plays an important role in shaping the style and perception of the female look. When choosing shoes, you should take into account the purpose of the bow and taste claims.

  • High-soled boots are used to create an elegant look in winter, and wedge or stiletto heel sandals in summer.
  • A casual outfit accepts practical, versatile pieces and comfortable shoes, so slip-ons, mid-heels, or loafers can be worn.

  • Ankle boots, lace boots, ballet flats decorated with bows or ribbons are appropriate for the holiday.
  • When going for a walk or rest in the park, it is better to wear sports shoe samples - sneakers, moccasins or sneakers.

Accessories add a special flavor to the style, so they must be carefully selected, taking into account the color type of the appearance and the characteristics of the bow. Blondes, brown-haired women and brunettes will be adorned with gold and silver jewelry, gloves in neutral tones, stylish glasses. An exquisite bracelet will become an accent of style, and a spherical or rectangular handbag will accentuate a business look.

Woolen yarn is one of the most popular knitting yarns. Woolen items are characterized by a high ability to retain heat, soft, pleasant to the touch, and comfortable. However, sheep's wool is coarse, and producers began to look for other animals with more soft wool.

At first, mohair obtained from the wool of angora goats was very popular. Such goats were bred in Turkey, but did not take root well in other areas. An analogue of the yarn for the manufacture of which the wool of the angora goat was used was yarn from the wool of rabbits of special breeds, which began to be called angora.

Angora is obtained from rabbit fluff, which is why it is so soft and fluffy. Its disadvantage is its fast rolling out.

Manufacturers of threads have found a way out, and it is practically impossible to find angora in its pure form; it is mixed with other types of wool or synthetic threads, in particular with acrylic.

It is also more profitable financially, as the tender angora is very expensive. It is connected with raising and keeping rabbits, and collecting down is a very specific procedure that requires delicacy. Angora is surprisingly light and size 46 requires only 300 grams of this yarn. Things associated with the use of high-quality angora will delight their owners for many years with a careful attitude towards them.

  • gentle wash in hand mode;
  • the use of special detergents designed for woolen products;
  • drying only in a horizontal position.

We knit beautiful things

There are different types of yarn, depending on the quantitative and qualitative composition. They make good warm, moderately fluffy hats, outerwear, dresses, sweaters, scarves, mittens. It is better to knit angora clothes for open toes to avoid the fluff rolling off quickly. Often they knit weightless, elegant boleros, capes, shawls.

Size 36 requires 3 skeins of angora yarn. The model consists of a back, two shelves and sleeves. For the shelf, cast on 28 loops. Knit with front satin stitch 4 r. and then we proceed to the knitting process according to the scheme . From one edge add 1 p. 2 times, every 5 p. After 9 cm from the initial part of the fabric for the neckline, close 5, 3, 2, 1 p., And after 2 cm from the beginning of the neck, from the other edge, close 3, 1 p. For the armhole. When the height of the fabric reaches 29 cm, it is necessary to close everything loops. Knit the second shelf in the same way in a mirror image.

We knit the back from 54 sts as well as knitted before, with the exception of the neckline. Having completed the armholes, we close all the central loops at the level of the height of the front in a straight line.

For the sleeve, we type 40 stitches on the knitting needles and after 4 rows of the front surface we proceed to the pattern. To expand, gradually add 1 st on each side after 15 rows. Tying 30 cm in height, close 3, 2, 2, 3. Close all the remaining loops at the same time.

Use 2 skeins of Angora Gold for the standard cape size.

First, first you need to dial on knitting needles 82 loops with a thread in two folds and knit alternately 27 segments including 5 rows with the inside side, 5 rows with the front side, while ending with purl rows. You should get a rectangular canvas.

Then we close or skip the loops according to the scheme: close 22 points, skip 1 point, and continue in the same order: close 3, skip 1, 19 and 1. In the next 9 blocks: 2 close and 1 skip. The remaining 3 p. should be closed. Lower the loops that remained skipped to the end of the web. Make a collar from a piece of 22 p. The cord is made from thread in 6 additions from 2 bourdons and inserted into the first section of the dropped loops. You can attach pom poms to the ends of the cord.

Vest in yarn with angora and beaded collar

For size 36, prepare 3 skeins of Angora Gold, 5 knitting needles.

For the front, cast on 110 loops with a thread in two additions and following the pattern, repeat from rows 1 to 4:

1: 1 persons., 2 purl, 2 persons., 2 purl.

2: 1 purl, 2 persons., 1 increase from an intermediate thread, 2 purl, 2 persons., Repeat up to 24 loops. Tie 25 and 26 together. Next 24 sts: K2, K2tog, P2, K2. Finish 2 persons., 1 purl

3 row knit according to the pattern.

4 row repeats row 2.

Tying 30 cm high, close on both sides 9, in the next 2 loops to form an armhole. After that, we form the neckline by dividing the knitting into two halves. At the same time, we knit according to the scheme, making only decreases, thus the cut is formed in a natural way. Having connected a section of the canvas until 26 loops remain on the needles, continue another 8 cm until closing, making increments along the edges according to the scheme.

Knit the back in the same way as the front without the formation of a neckline. Close all loops at the end at the same time.

For the collar, dial 220 p. And tie 10 cm: 1 purl, repeat 4 times: 2 persons., Block of elastic bands 18 p. (2 purl, 2 persons.), Repeat 2 times 2 persons., Block of 26 p., 4 repeat 2 persons., 18 p. gum block, 2 persons., 1 purl. Then tie 6 p. front satin stitch, while between 3 p. run a row with repetitions: 1 yarn over, 2 together. Having finished the collar, fold it along the line with yarns and sew it to the neckline. Sew the beads between the loops at the edges of the collar, neckline, and along a strip of 2 front loops.

Other Angora products

This model will become your favorite and irreplaceable in the spring and autumn. Due to its softness and comfort, tenderness and warmth, this jumper will not want to take off. Knitted with a simple knit, it is both simple and very attractive, sits beautifully on the figure.

Delicate angora jumper

For size 36, cast on 100 loops for knitting the back or front and knit 1 purl, * 5 front, 2 purl, * to the end of the row, at the end there should be 5 front, 1 purl. At a height of 37 cm, close 5, 4, 3 loops for the armhole from each edge and continue knitting. Close all loops at a total height of 56 cm.

To knit the sleeves on the knitting needles, we collect 54 loops, we knit an elastic band 5 x 2. To expand the sleeves, add 1 loop on both sides in each 10th row. At a height of 42 cm, close for armholes 5, 4, 3, loops and knit to a height of 52 cm.

Sew the parts together.

Charming snow-white set: hat, mitts, cape

Size 38 requires 10 skeins of angora yarn (106 m / 25 g), 5 skeins (100% polyamide, 100 m / 50 g) needles 3, 4, 4.5.

We knit the cape with a single cloth, from left to right. From 68 stitches dialed on needles No. 4, knit 3 cm with garter stitch angora. Then 6 loops in garter stitch, 20 sts according to the pattern, continue knitting with another yarn with a height of 21 sts, go to the angora and knit another 21 sts with a fancy pattern. On the left, add for expansion in every fourth row 5 times 2 and 10 x 1 p., Continuing to knit according to the pattern, including, including the added loops. When there are 88 loops on the needles, knit another 97 cm straight.

Finish the right side in the same way as the left, making decreases in the reverse order from the additions and knitting at the end 3 cm with garter stitch. Collect the edge of the neck with a thread up to a width of 56 cm, cast on it 124 stitches with angora and sew with an elastic band 4 x 4 18 cm.Then, in each group of loops, add one at a time and knit with an elastic band 5 x 5 23 cm. Perform 4 rows with another yarn, then 6 p. angora, and close the loops with another thread. Make a 5 cm seam along the edge of the base of the collar.

We also make a hat from two types of yarn. The lower part is made of synthetic thread, the upper part is made of angora, we both knit separately. For the bottom, cast on 40 loops and with knitting needles No. 3, make a pattern according to the pattern with a length of 56 cm.

For the upper part on the needles, we collect 40 stitches and knit with the front stitch with increments in each fourth row 5 times, 2 on each side. We continue straight and after 26 cm we make decreases in the same order as we added. We close the hinges. Sew together the parts. The bar must be folded inside out and secured. From the angora, make 2 pom-poms with a diameter of 6 cm and sew to the bottom.

We begin to knit mitts by gaining 41 stitches with yarn with angora and performing 10 r. face loops. We continue 29 cm with another yarn 21 loops with a pattern, again with an angora 20 p. With a pattern, starting from the second loop of the pattern. Before closing the loops, knit 6 p. angora garter stitch. Sew side seams, leaving a finger hole 4 cm from the edge.