How to make Christmas balls with your own hands. Master class on how to make Christmas balls with your own hands: painting, decoupage, decorating Christmas balls

On the eve of the New Year and Christmas holidays, work on the manufacture of Christmas tree decorations becomes relevant. Styrofoam is no exception, a master class on the manufacture of which will show what interesting Christmas toys you can make yourself.
Since the foam is taken as the basis, the resulting Christmas balls will be unbreakable, which will delight the parents of the kids.

So, for such unbreakable balls, we need multi-colored threads, polystyrene foam, any decor.

A ball of the required size cut out of foam must be wrapped with thread. Having fixed the beginning of the thread, it is necessary to wrap the ball crosswise, gradually moving over the entire area of ​​the ball.

At a certain stage, you can already wind in a chaotic manner until the foam ball is completely hidden under the threads.

When the winding is already completed, the end should be properly fixed.

The decoration of the resulting ball depends only on your imagination and fantasy. Various patterns can be embroidered.

Sew on an invented appliqué and decorate with beads.

Sew sequins in the form of flowers.

Be sure to come up with and fix a rope for which the resulting ball can be hung on a Christmas tree.

Another version of the kimekomi-style foam New Year's crafts. The technique is quite interesting and originated in Japan for making dolls. In this master class, kimekomi is applicable for decorating foam balls.

We prepare in advance: a foam ball, multi-colored shreds of fabric, a lace for decoration, various colored ribbons, beads, buttons, sequins, sewing pins, a stationery knife, scissors and other sewing tools at hand.
Since the pattern on the ball is usually symmetrical about its poles, they must be marked at the very beginning of work.

We outline lines from the poles that are equidistant from each other. You can use a pen, pencil or a disappearing felt-tip pen for this.

Now all the lines of the pattern should be cut with a clerical knife to a depth of one centimeter. The work should be carried out very carefully and carefully.

We begin to work with the first part of the pattern, for which we coat it with glue in the form of a pencil.

We take a piece of the selected fabric and apply it to this part of the pattern. At this stage, you should correctly position the fabric depending on the direction of the pile.

Next, the kimekomi technique itself begins - with the help of a thick needle or knitting needle, the fabric is inserted into the slots along the entire contour of the selected part of the pattern. Make sure that the fabric lays flat and does not warp.

After all the fabric is inserted around the perimeter of the pattern, the rest of the fabric can be cut with scissors, so that two to three millimeters remain.

The resulting allowances can now be completely hidden in the slots.

This is what one finished segment of the pattern looks like.

We do the same with the rest of the segments.

In principle, at this stage, the ball already looks finished, but if you wish, you can continue the work further.
Using glue and the same large needle, we will glue and stick a little decorative lace on the borders of the pattern elements.

First, we coat the place with glue, and then insert the lace there.
In some places, the lace can be completely hidden, but this is up to you.

In our case, such a cap for large beads will give the finished look to the New Year's ball, but you can just use a bead, sequins or something else.

Using a sewing pin, we pierce our ball, while the pin must first be coated with glue.

We use the same decorative cord for hanging.

To slightly dilute the usual lace, we suggest decorating it with such a bow. To do this, you need to wind the ribbon around several fingers, literally five turns, without straightening it, pierce it with a pin.

To fix everything more reliably, we also coat the pin with glue and stick it into our ball. Now the bow can be straightened in all directions, and the petals themselves can be grabbed a little with glue for reliability.

For all the proposed foam crafts, you need a perfectly even foam ball, which is quite difficult to cut out yourself. However, for such work, you can make a special device that will greatly facilitate your task.
First of all, you need a pipe, the diameter of which is a couple of millimeters larger than the diameter of the future ball. The length of the pipe must be at least four times the diameter of the ball.
In the prepared tube, cut off a part of it, the length of which is equal to two ball diameters. Next, we glue sandpaper-zero in the cut-out part on the inside. On the reverse side of the tube, sandpaper should also be glued as shown in the photo.

Today, on the shelves of stores you can find a huge number of a wide variety of Christmas toys, so turning an ordinary Christmas tree into a real festive beauty is not difficult. However, the New Year is a special day! The day when the old year is left behind, and new adventures, new events, new victories await. But after all, the old year did not pass without a trace, warm memories, bright events, your personal victories and achievements remained from it. It would be nice to remember the outgoing year for many years to come. And you can do this with the help of a New Year's ball made by yourself. Each time, dressing up the Christmas tree, you will get New Year's balls out of the box, and along with them, remembering the past.

Making Christmas balls with your own hands is quite simple: for this you will need inspiration, a desire to create and a little perseverance. We have prepared for you 15 master classes on making Christmas balls with your own hands.

To make such a ball, you will need: a simple glass or plastic ball, old CDs, scissors, tape, glue.

#2 Christmas ball with fingerprints. We decorate Christmas balls in an original and simple way

To make such a masterpiece, you will need: a glass or plastic ball without a pattern, paints (watercolor, gouache, acrylic), felt-tip pens or markers, brushes.

#3 Christmas ball made of paper tubes. Master class on manufacturing

To make a New Year's ball from paper tubes, you will need: a foam or plastic ball, glue, thin paper, threads.

#4 New Year's ball of sequins. Step by step master class

To make a New Year's ball of sequins, you will need: foam, plastic or glass ball, sequin tape, glue.

#5 Do-it-yourself fragrant Christmas ball

New Year is a holiday of smells! Why not add some flavor to your Christmas tree? To make such a ball, you will need: an orange, a lemon or any other citrus fruit, ribbons, a wide elastic band, a toothpick, New Year's spices (cinnamon, cloves, etc.).

#6 Christmas ball from old newspapers

Christmas balls decorated with old newspapers look very original. To do this, you will need: a foam or plastic ball, newspapers, glue, masking tape, thread, paints, felt-tip pens or a gel pen.

#7 Christmas ball decorated with felt. We make decorations for the Christmas tree with our own hands

To create an original Christmas ball, you can use pieces of felt or other fabric. To create such a ball, you will need: a ball (plastic or foam), felt or other fabric of several colors, glue, thread, scissors.

To make a New Year's ball from fabric, you will need: a foam ball, fabric of several colors, safety pins (a lot!), beads, scissors, glue.

#9 Christmas ball made of rags

If you want to make an original New Year's ball with your own hands, then pay attention to the flap ball. To do this, you will need: a foam ball, a clerical knife, fabric of different colors, a felt-tip pen, a tape measure, glue, safety pins, a wooden skewer or a toothpick.

#10 DIY Christmas ball from threads

The New Year's ball of thread is incredibly popular among needlewomen. For its manufacture you will need: a balloon, threads, PVA glue.

#11 Christmas ball decorated with stained glass paints

An excellent Christmas decoration can be made using stained glass paints. To create such a ball, you will need: a glass or plastic ball, stained glass paints. You can do it in several ways: draw directly on the ball or make preliminary blanks, and then stick them on the ball.

#12 Christmas ball made of string and beads. We make Christmas balls with our own hands

To make such a New Year's ball, you will need: a foam or plastic ball, cord, beads, glue.

#13 Christmas ball of buttons. Decorate the Christmas tree with the kids

Even the smallest residents of the house can make a New Year's ball from buttons. For such a craft, you will need: a foam ball, multi-colored buttons, glue, thread.

#14 Christmas ball with beads

Balls decorated with beads look very beautiful on the Christmas tree. You can decorate the ball with beads from the outside or from the inside. Which of the ways to choose is up to you, but we, for our part, will notice that the outdoor decoration may crumble after a while. In any case, you will need: a plastic or glass ball, glue, beads.

#15 Christmas ball decor with cloth or paper

If there is very little time left, and you really want to decorate the balls, you can use a very simple and original trick: decorating the ball with wrapping paper or fabric.

#16 DIY Christmas balls using decoupage technique

If you want to make a truly unique Christmas ball, then it's time to master decoupage. To make a New Year's decoupage ball, you will need: a plastic ball, themed napkins, white acrylic paint, PVA glue, acrylic decoupage varnish; fan-shaped brush, foam sponge, glitter for decoration.

#17 DIY Christmas balls from cotton pads

An excellent option for a New Year's ball will be a toy made from ordinary cotton pads. For its manufacture you will need: cotton pads, stapler, needle, thread, tape.

#18 Christmas paper balls

Well, the last version of the New Year's ball, made by hand, will be a paper ball. For it you will need: double-sided thick paper, scissors, glue, ribbon.

Help us become better: if you notice an error, highlight the fragment and click Ctrl+Enter.

New Year is a special holiday. And in the pre-New Year's turmoil, the second most powerful, after the desire to quickly sit down at the table, is the desire to make New Year's toys with your own hands. It is not customary to reckon with the expenses for the New Year; the festive industry, we must give it its due, the demand is trying in every possible way to satisfy and does not prescribe insane markups: the goods are in demand, profit will be so. But the variety is so great that do not expect uniqueness from the purchase, somewhere the same is still on sale. So I want something from my own hands and with a piece of my soul.

In this article - part, however, is quite extensive, of the boundless sea: how to make Christmas decorations with your own hands. Let's touch on a very popular wreath on the door and styles of decorating the Christmas tree. Of course, there are more than enough New Year's themes for home craftsmen with craftswomen and their little helpers: decorating a room, a festive table, a homemade Christmas tree, and much more. Making a lush and fragrant Christmas tree with your own hands, for example, is not difficult, and living trees remain on the vine, and do not go under the ax. But you can’t immediately embrace the immensity like that. Therefore, for now, we will limit ourselves to Christmas tree decorations. But! Take a look at fig. Part, and most, of all these Christmas tree decorations is made by hand. Including the bell at the top right next to the red apple. See? It used to be a glass of yogurt. Like? Then, as they say, you are here. We will do no worse.

The material is designed primarily for New Year's do-it-yourselfers who do not own complex technologies and do not have a home workshop at their disposal. To make the Christmas decorations described below, you will need scissors, an awl, a sharp knife with a thin blade (scalpel or mounting), thread, a sewing needle, nail clippers or side cutters, and tweezers or small pliers. Also - PVA glue, superglue (cyanoacrylate instant) and, in some cases, "Moment" or its analogues. For certain types of toys - some other small household tool or household utensils. What other materials will be needed, simple and affordable, we'll see along the way. All the work can be done on the table, covering it with a film or covering it with cardboard.

Miscellaneous tricks and tricky differences

No workflow is possible without the right technology. We don’t need workshops with robots, we need to make do with what is at hand. In order for homemade New Year's crafts to please both the hands at work and the eyes ready, you need to learn a few simple ways to prepare blanks and materials for Christmas tree decorations and the rules for their use.

Shine

Now, for some reason, almost everything shiny for the New Year is called glitter; in Russian - shine. Reading the manuals, sometimes and with considerable personal experience, it is difficult to figure out what is meant: sequins, colored laminated paper, thin shiny plastic film, metallic paint, or some new product in general.

We'll start with the glitter; can't do without them. Sequins for Christmas decorations are inexpensive, but in the outback they may simply not be on sale. In this case, a manual noodle cutter (see the figure on the right) and a foil baking sleeve will help out. The noodle cutter needs to be manual; the powerful motor of the food processor does not feel the unusual material, and the nozzle will immediately become clogged, or even broken. Manually, the work goes well:

• From the roll, the sleeves are cut off with a knife, a part about 10-12 cm wide.
• Gradually unwinding the aluminum tape, pass it through the machine.
• Then, and it is possible in the course of work, if there is an assistant, they finely chop the “noodles” with scissors. The kids like it if there are not enough scissors for everyone, not far from the fight.

Instead of foil, you can also use glitter, which is a shiny colored plastic film. And another note: do not try to replace shredder assistants with mechanization in the form of a meat grinder. “Noodles” instead of sequins will turn into pellets, and you won’t clean the meat grinder later.

Toys usually “shine” by sprinkling a surface covered with dry PVA, varnish or paint. But you can “shine” with spots; if there are multi-colored sequins - multi-colored. To do this, a portion of the sequins is collected in a straw of the desired diameter, from a very thin one for juice to a hose under 2 cm in diameter for a smoothie or shrimp cocktail, and the desired area is gently blown with sequins. Having adapted to blow, you can also display patterns. In any case, to blow out the stripes (see. Fig.), Long training is not required.

colored varnish

Transparent colored varnish is prepared on the basis of nitro solvents 646, 647, etc. Dye - paste for ballpoint pens. OK. 50 ml of solvent is poured into a glass cup (in a ventilated room!), a writing tip is pulled out of the rod with pliers (carefully, do not get dirty!), And the paste is blown into the solvent. The tone of the paste is very dense, so more than 1 rod is unlikely to be needed. The finished varnish is poured into a vial with a gas-tight stopper and a lid. Pharmaceutical vials from hydrogen peroxide are well suited, they do not need to be washed. The glass (beaker) is washed from the remnants of varnish with the same solvent.

Blanks for balls

In shops and departments "Skillful hands", "Everything for creativity", art, and on New Year's Eve and in gift shops, foam and transparent plastic blanks for balls are sold. Transparent balls are most often filled with something colorful, see fig. on right. For decoration, it is better to take plain ready-made balls, they are cheaper and are sold everywhere. We'll see what we can do with them.

In the meantime, let's see where to get away from the centers with a large trade turnover and how to prepare very convenient foam balls for work, we will also deal with them for the Christmas tree. The first question is solved simply: there will surely be some kind of fishing and hunting shop within reach. And in it - cheap floats for fishing rods and nets from the same foam balls of different sizes. Are they perforated? So what, it will be easier to attach the suspension loop.

However, the foam corrodes almost any paint and varnish. Almost the only thing that definitely does not spoil it is PVA. Here is PVA and you need to cover the foam blanks before letting them go further into work. Better - twice, with the complete drying of the 1st layer before applying the next. PVA film is quite resistant and will accept painting well.

Note: PVA is also desirable to process inflatable gel balls in those places where the pattern will be applied. And if it was drawn with a gel pen, then it would be nice to protect the drawing in the same way from accidental smearing with wet hands.

Papier mache

Sticky semi-liquid paper mass - papier-mâché - is indispensable in the manufacture of New Year's toys in many cases: knobs are made from it, they mold the basis of funny faces, etc. Usually, for the preparation of papier-mâché, it is advised to take old newspapers, but due to the admixture of printing ink, the tone of the product then comes out dirty. For papier-mâché, it is better to buy clean white newsprint (not glued) paper at the stationery store. Cigarette and mica are no good! Papier-mâché is made like this:

1. The sheet is passed through a noodle cutter or finely cut with scissors.
2. Spread the trimmings in a glass, crushing tightly.
3. A full glass is poured with boiling water and left for 3 hours. Absorbed boiling water must be immediately topped up to the top of the settled paper!
4. The mass from the glass is poured into a bowl and kneaded until the dough or plasticine is thick, gradually adding PVA; should take about 2 tbsp. spoons of glue.
5. The finished papier-mâché is laid out in a jar with a tightly screwed lid; shelf life in a canned vegetable jar lasts up to 6 months.

old light bulbs

Burnt out incandescent light bulbs are an excellent basis for Christmas decorations. However, if you want to fill the flask with something (see Fig.) or cover it with transparent varnish, the question arises: how to separate the flask from the base, open and remove the stem with internal fittings?

The base is separated by boiling: the bulbs are placed in a saucepan with cold water, heated over low heat until a slight boil, and boiled for up to 10 minutes. The fallen off base will not fall to the bottom, it will hang on the wires. After the lamp has cooled down, they are bitten off with side cutters, the tips of scissors or manicure tongs, thrusting them deeper into the socket of the stem.

Next, an emery bar is placed in a large bowl or small basin and water is poured to cover it. Then, with light pressure, in smooth circular motions, erase the side of the flask until the stem falls out; takes 1 lamp up to 5 min. The base, if needed, is glued back with superglue.

Note: you need to work with light bulbs in cotton household gloves, which are used, for example, when cutting fish. Glass is a dangerous material! The second important thing is that only incandescent lamps can be disassembled! In the light tubes of housekeepers - mercury vapor! A negligible amount, but still - mercury is mercury, it is not excreted from the body.

Salty dough

Excellent Christmas toys can be made with your own hands from salt dough, see fig. Figures are cut out of its thin layers with cookie stamps (pos. 1.2), cut out with a thin sharp knife by hand (pos. 3) or according to templates (pos. 4.5). Salt dough is not edible, but it will take any paint with varnishing very well and will allow you to cut very thin contours.

The composition and method of preparation are as follows:

• White wheat flour - 200 g.
• Fine table salt - 200 g.
• Refined sunflower oil - 3 tbsp. spoons.
• Water - 125 ml (a little more than half a glass).

Salt is mixed with flour, then butter is gradually added, kneading all the time. Then water is added also with continuous kneading until the consistency of clay or plasticine. Spread the mass in a plastic bag, and put it in a jar with a tight lid and store it in the refrigerator in the vegetable compartment, up to six months.

In a layer 3-4 mm thick, the dough is rolled out with a round rolling pin. The cut figures are placed on a baking sheet, a sheet of tin, galvanized iron, etc., and dried on a radiator. It is impossible to dry quickly in the oven or just on the table without heating! Drying takes several days; completely dried figures are painted, painted with gel pens, varnished. They, with careful storage, will be enough for more than one New Year; salt dough - the material is quite durable.

Note: You can learn more about Christmas toys from dough from the video below:

Video: Christmas toys from dough

Decoupage

Decoupage, simply - decals - is widely used in New Year's decor. However, not everyone is suitable for Christmas toys. Christmas tree toys need to be decorated with plastic decoupage, which lies on curved surfaces without wrinkles. It can be distinguished (sellers do not always know what they are selling) from the usual one by its protective coating: in this case it is not a film, but a porous napkin. Moisturize and remove before use. The picture is superimposed on the base, unlike flat "translations", in the center, and carefully, in smooth circular motions, smooth to the edges. The best base is a slightly rough layer of PVA applied with a foam swab, or the same layer of white nitro paint.

Note: children decouple most accurately - their fingers have not yet become calloused.

Popcorn

Small popcorn glued with PVA or superglue can in many cases replace papier-mâché. It, like the latter, before use, it is desirable to process the PVA in the same way as the foam, and for the same purpose.

Christmas tree decorations

Snowflakes

The first and simplest way to decorate both the Christmas tree and the whole house is snowflakes. Probably everyone knows how to cut them; just in case, we give a diagram (fig. below) of how to cut snowflakes with gaps in the rays.

However, in reality, water crystallizes in a hexagonal pattern, i.e. real snowflakes have 6 rays. Cutting them out in the same way will not work: if the sheet is folded three times, it will not turn into a snowflake, but six times - you get 12 rays. Therefore, if you do not feel sorry for the work of real snowflakes, we give a diagram of the crystallization of water, see fig. on right. It can be used to compose an uncountable set of figures, and for inspiration, or as samples for templates, in fig. below are photographs under a microscope of real snowflakes from a real snowfall. Is it true that human imagination is far from nature? Experts say that 2 identical snowflakes have not yet been seen.

A word about boxes...

Preparing for the New Year in advance, do not throw away small warranty boxes that are no longer guaranteed. They make excellent toys, see fig. Yes, and with surprises can be done. It is interesting then to observe what kind of barter negotiations the “high contracting parties” then start, having discovered that he got a baby doll, and she got a model car.

... about eggs ...

Also excellent toys come out of bird eggs, see fig. below. It is best to take goose or turkey eggs, they are large and strong. At the poles of the eggs, with a gypsy needle or awl, holes are carefully turned and the contents are blown into a cup or bowl; on an omelet or scrambled eggs, in dough, cream, etc. it suits well. And the shell is treated with PVA, like foam, painted, varnished, sprinkled with glitter, rag fragments are glued on, etc. The pink "bump" in the center, for example, is pasted over with dyed popcorn.

… and about nuts

One of the oldest types of Christmas decorations is foil-wrapped walnuts. The thread of the suspension loop was passed along the seam between the shells; now you can just glue it on. Neither is a hindrance to eating. Especially for this, the Nutcracker was placed under the Christmas tree, about which P. And Tchaikovsky wrote the ballet music, which was later used for the opera.

balls

Christmas balls - an immense world in the vast world of Christmas decorations. And in the vast world of Christmas balls there is an immense world of paper balls, if we consider the body of rotation in a smoothly curved surface and regular polyhedrons as a ball. We will deal with all this immensity in the immensity in the immensity now, remembering: everything should be within the power of the child, and in order to do it it was possible at home on the table.

From blanks

First, let's try to change the monotonous finished balls in our own way. The technique is simple, see pic:

1. We select plastic balls cheaper, with a matte dull surface;
2. We paint with white nitro paint;
3. After complete drying, we decouple;
4. Well, how? How much is this in the store? Under the New Year?

Note: and if you don’t feel sorry for the money for a glue gun, and there’s nowhere to put old beads, glass beads, artificial pearls, then here’s another option in the pic .:

Now let's get to the foam. Here the options are much more diverse, see fig. below. Pos. 1 - you will need a figured hole punch from the same craft store. If from the Internet, then order ahead of time; how parcels go on New Year's Eve is known. Next - pins with bead heads, pos. 2 and you're done. The suspension loop is fixed with a piece of a toothpick or a match and a drop of PVA.

Suddenly there is no curly stamp for paper, but there are pins and beads, it turns out a ball-colored hedgehog, pos. 3. Beads are strung on pins, and the tip of each, so that it sits tighter, is dipped before being stuck in PVA. And pos. 4? Guess! Chupa Chups with sticks bitten obliquely (to make it easier to stick in). You can eat directly from the Christmas tree, if adults do not mind. Or quietly, on the other side.

For pos. 4 and 5 already require a glue gun and a workpiece protected by dried PVA. Finishing materials - cord and glass beads or artificial pearls.

From light bulbs

Light bulbs, as mentioned above, blanks for Christmas decorations are difficult, but grateful, see fig. Low-power lamps with a narrow “minion” base and a frosted embossed bulb, pos. 1; it is considered that the finished balls. Light bulbs - "candles" are also not bad, but if you do not remove the stem, they must be immediately after painting / varnishing, until the paint / varnish has dried, sprinkle thickly with gloss, pos. 2. Burnt-out housekeepers of low power in double flasks-“cones” are made on purpose for the New Year: all that remains is to decouple, tie a loop on the base, close it with papier-mâché, and you’re done (pos. 3).

From ordinary light bulbs, you can also do a lot of New Year's things. The easiest way is to get penguins (pos. 4): here you don’t need to be able to draw at all. Barbosov-Shreks can also be made without art education - the shades on the background are made through with a small foam rubber swab, and the line drawing is drawn with gel pens. In the same way, toys are created that require, in addition to talent, and sufficient skill, poses. 5 and 6. In general, a matter of taste and imagination.

Gossamer balls

Thread balls are all the rage right now, and in this case, she didn't go crazy. There are several varieties of them. The first one (pos. 1 in the figure) is an ordinary cheap ball, on which a plastic mesh is stretched, in which garlic and other trifles are packaged in supermarkets. Let's add another bow from the ribbon - already something. Just like the same cheap balls decorated with tulle or organza trimmings, pos. 2.

"Real" gossamer balls are made from glued colored threads, pos. 3, 4. It is best to take threads for satin stitch embroidery, but simple ones will also go with additional decor. The technique is simple: the thread is pulled through the PVA and immediately wound onto an inflatable template lubricated with petroleum jelly. After the glue dries, the template is blown off or simply pierced and removed.

For small Christmas balls-spider webs, the template can be inflated, perhaps, only from a medical fingertip: it has a roller that allows you to hold the workpiece against the lips when inflated; nothing will come out without a roller. Gel and latex balloons are not suitable: so that they do not slip under the thread, they need to be inflated to too large a size.

There are plenty of devices for pulling a thread through glue; one of the simplest ones is shown in Fig. The glass allows you to economically spend glue, and the tray does not let its excess onto the table. The glass is pierced with a needle and thread, glue is poured, pulled, wound. It is only necessary that the assistant hold the “broach”, otherwise, if the thread gets hooked, the glue can turn out onto the table, knees or chair upholstery. An alternative to the helper is a piece of double-sided tape, with which the tray is attached to the countertop. You need to wind dexterously, because. PVA impregnated thread dries quickly.

More about yarn balls

Beautiful thread balls can be made not only in the "spider" technique. The method of making one of the oldest Christmas tree decorations from threads - a pompom ball - is shown in fig. To pos. 5: cut the thread along the rim with a sharp knife or a safety razor blade. Pompom balls look especially impressive if the ends of the threads are tinted with silver, bronze or metallic paint in a contrasting color.

Paper balls and more

We now proceed to the immensity in the immensity - Christmas tree decorations made of paper. It's a whole big world; for example, masters of modular origami create creations from it, clearly confirming: paper is one of the most wonderful materials invented by man, see fig. But we will leave these difficulties for later, and let's deal with what can be done, as they say, with kondachka, and which also looks spectacular.

How to make a simple paper ball for a Christmas tree is shown in fig. Material - thick colored paper, PVA. It is not forbidden to paint, varnish, sprinkle with glitter. If the ball is made of glitter (laminated paper, plastic), you need to glue it with "Moment" or superglue.

Openwork

Next in terms of ease of manufacture, but not in appearance - openwork paper balls; of them, in addition to the Christmas tree, a magnificent decor of the room is obtained. The larger the openwork ball, the easier it is to make and the better it looks. The technique is simple, an example in Fig. deliberately very rough was chosen to show how tolerant the openwork balls are to the neglect of the material and flaws in the work:

1. Paper circles are quilted with a thread or (worse) sewn with a stapler in diameter. Their even or odd number is taken depending on the gluing scheme, see below;
2. They are glued together in pairs in a checkerboard pattern until the entire “booklet” closes into a ball;
3. A loop is glued;
4. The ball is decorated.

And now about what can be achieved from an openwork ball if you do it carefully, patiently and with understanding. First, the generating figure can be any body of revolution. The main thing is that the workpiece should be bilateral, i.e. its right and left halves should be mirror images of each other; quilt a stack of blanks along the axis of symmetry.

Secondly, the places of gluing must also be accurately marked on the “booklet”, by striking with handles along the edge of the foot. Handles - because the places of alternating gluing are marked with 2 different colors. And finally, you need to glue it carefully, putting a drop of glue on each joint. Squeeze to setting not with paper clips, but with your fingers through a plastic wrap. What can be achieved in this way is shown in Fig. on right.

Some stereometry...

Regular polyhedrons are often taken as the basis of a Christmas ball: they look great with skillful decor, and gluing them out of paper is easy if you know how. The very polyhedra suitable for the Christmas tree, without "impurities" of other flat figures, are made up of equilateral triangles and pentagons. Since not everyone knows the basics of stereometry and planimetry, we give their templates inscribed in circles, see fig. The segments (wings) of the circumcircles are not cut off, but are bent and glued together. The balls are glued with the wings out, and the plafonds of the lanterns are inward (see below, about garlands).

The simplest regular polyhedron is a tetrahedron, a trihedral pyramid. However, the ball, which is already a ball, is an octahedron: two 4-sided pyramids glued together with bases without bottoms. How to assemble it can be seen at the top in fig. Even more spectacular are the regular 20-sided triangles of the icosahedron and the regular 12-sided dodecahedron of 5-gons. Many ways of gluing icosahedron balls have been described; dodecahedrons are ignored for some reason. However, if there are templates at your disposal that are inscribed in circles and printed in the desired size, it is easiest and most accurate to glue according to the patterns, below in fig. Coloring, decoration, of course - to your taste.

Note: regular 3- and 5-gons can be used to form polyhedra with any, up to infinity, number of sides.

… and topology

Curved, complex shapes are already dealt with by another science - topology. Not without its application to Christmas decorations. Most of the "topological" decorations, however, are quite difficult to make, so we give only 1, but a very beautiful ball that can be woven without special knowledge and experience. First you will need to print a pattern of blanks on colored paper (see Fig.) And cut them out.

The next step is the layout for gluing according to the template, see next. rice. It is better to draw the template yourself (radii - after 30 degrees), using a compass and a protractor, and a larger size so that you can make balls of different sizes. The sidewall blanks are laid out so that their spouts touch the center and the corresponding radius.

Then, on the center of the “octopus”, more precisely, the twelves, carefully, so as not to knock down the calculation, stick a circle, pos. 1 next. rice. In the same way, they glue the second centipede, turn it over, put the first one on it and intertwine the “tentacles”, pos. 2 and 3. As a result, a ball is obtained such as in pos. 4.

Note: if the "centipedes" are assembled not in one color, but from blanks of alternating colors, then the finished ball will turn out not from rhombuses, but from spiral stripes.

hedgehog and vice versa

A compass with a protractor will also be needed in order to make a papillot ball. It is called so because its "horns" look like paper hair curlers, which curled the style of the past. In fact, this ball looks like a hedgehog. How to do it is shown in Fig:

• Cut out 10 circles and divide into 2 equal piles, 5 in each.
• The circles of each pile are cut along 8 radii at 45 degrees, pos. 1 in fig: 1st half, last 5/6 of the radius; intermediate - gradually increasing the depth of the incision. You need to cut accurately, so it’s better to immediately draw smaller circles on the circles - markers.
• The petals are folded into papillotte cones and glued along the seam.
• Each pile is folded in order of increasing incision depth, with the “needles” displaced along the circumference, pos. 3, and pull it together with a thread in the center so that the “needles” flutter.
• The two halves of the “hedgehog” are folded with their bottoms and finally pulled together with a thread, pos. 4.
• The ball is painted, the ends of the needles are gilded, silvered, sprinkled with sparkles, etc.

Good balls on the same principle can be obtained in a simpler way. To do this, many papillots are folded from circles separately; better - from a silver or golden plastic film. The diameter of the blanks may be different. Then they are placed on the table and leveled in height, trimming the tips. The next step is gluing to the base (large bead, foam or ping-pong ball) with the points inward. It turns out a “hedgehog inside out”, or an anti-papillot ball, see fig. on right. Paper can still be decorated, but shiny is already good.

More paper

The basis of the next series of Christmas tree decorations is an accordion or a paper fan. A small part of what can be done from them is shown in Fig:

The craft on the top row will fit old buttons and a little help from an ordinary clerical hole punch, and for the one below, you will need another scotch ring, etc. However, the ring can also be glued from several layers of paper on a mandrel from a bottle, can, etc. In this case, the mandrel must first be wrapped with plastic wrap so that the ring does not stick. And to make it easier to remove, the paper tape must be wound onto the mandrel not tight and closer to the bottom or neck.

Note: a ring with small additions and coloring will go on jewelry by itself, see fig. on right:

You can also stick Chinese lanterns from paper for the Christmas tree and for the whole house. This theme is also boundless in the boundless; for example, we give the simplest, see fig. below. Best of all, these look made of multi-colored glitter, which in this case is colored glossy paper or plastic film.

Cones, icicles, bells

Spruce and pine cones are often advised to be turned into Christmas decorations by painting and pendants, on the left in the figure:

But traditional New Year decorations made of cones look much more impressive: the edges of the scales are tinted with bronze or aluminum powder (silver) and a bow, beads or small balls are added, right there. Such decorations, in addition, according to all beliefs, are a full-fledged replacement for bells on a New Year's wreath, see below.

Good icicle toys are made from salt dough dyed with silver. The blanks are cut out of the layer straight or slightly swollen in the middle, with pointed ends, or in the form of a spearhead elongated in length. Then twisted into a spiral; hang to dry.

Bells, except for plastic cups, are obtained from small PET bottles, for example, from ketchup. On fig. on the right - the original product, a blank for decoration from it and how the tongue of the bell is arranged. The “spindle” (thread for smoothing) is pulled through the dispensing spout of the cork and fixed with a standard cap. You can also pierce it with a needle, but the cap, as if on purpose, is made under a papier-mâché face. The whole body of the bell hangs freely on the top button. Of course, a bead would have gone better on a beater, but it was not at hand.

Garlands and beads

The simplest of the New Year's garlands - the so-called. English, see fig. She needs the same paper accordion. On it they draw, with some protrusion beyond the edges, the desired figure. First, internal holes are cut out with a scalpel (better) or a mounting knife. To tear the paper, at their corners and, with some intervals, at the sides, holes are punched with a hole punch, and jumpers are cut with a knife. Let's unfold the accordion - we get a tape like the one on the upper right in Fig. Below it are several patterns of stars suitable for an English garland.

The simplest of glued garlands is a chain of rings, at the top in fig. on right. But glued garlands of paper fans look much more magnificent, two poses. under it, double (interception in the middle of the accordion) and single. Fan garlands are best made from corrugated thin paper, and from dense - chain, two poses. at the bottom. It is clearly seen there that the blanks for them must be bilaterally symmetrical (bilateral). They are cut out of a sheet folded in half, this is, as it were, 1 element of an English garland.

Corrugated paper will also go well for "shaggy" garlands. How to do them is clear from pos. below: the roll is unwound, stretched (stretch), folded into an accordion stack (fold), then one side is cut with scissors along the corrugation to almost half (cut halfway through fold), turned over and the other side is also cut (flip + cut halfway on the other side). Then the accordion is unfolded and folded into a spiral. In order for the “corkscrew” to hold, you can, after securing its ends, sprinkle a little, literally a little, with water from a perfume spray bottle. It dries up and stays that way. But, if the water is transferred, it will spread.

There are also garlands strung. One of the simplest can be assembled from small ball-books like openwork, only without gluing the sheets. How is clear from Fig.

The strung quilling garland is also simple and effective, see next. rice.:

Christmas garlands, as you know, are luminous. Modern from microbulbs allow you to supply yourself with shades. The simplest ones are made from ping-pong balls: holes are turned with the tip of a knife and light bulbs are inserted inside. Fix by inserting a sliver or a piece of toothpick between the wires. This work is quite safe, unless the garlands are homemade for 220 V. Then - let the master manufacturer ennoble.

Very beautiful shades are obtained from polyhedral balls, but glued with wings inside. For what? And from the wings on the sides of the ceiling, bizarre shadows will fall from the inside. Finally, plafonds for a luminous garland can also be made using the classic origami technique. By the way, many Japanese do not recognize modular origami, with gluing elements, considering it an invention of armless Euro-Americans. Real origami, they say, should only be folded out of paper. How to make origami shades, shows fig. below.

Translation of explanations:

• Repeat on the opposite side - repeat on the opposite side.
• Repeat on the other 3 corners - repeat on the other 3 corners.
• Repeat steps 11-13 on remaining 3 flaps - repeat steps 11-13 on 3 flaps where required.
• Blow in the opening to inflate - inflate into the inflation hole.

Christmas tree beads, which look like factory ones (on the left in the figure), can be made from aluminum foil, salt dough and colored plastic tubes.

First, the foil is cut into squares from 10x10 to 20x20 cm, depending on the desired size of the beads. Bead blanks are rolled into balls between the palms, on the right in fig. Next, circles with a diameter slightly larger than the size of the beads are cut out of the salt dough, they are wrapped around the workpieces and smoothed. The beads are dried on a newspaper, painted with bronze or silver, or colored metallic. It remains to string mixed with tubes, and you're done.

Rain and tinsel

The old-fashioned silver rain on the Christmas tree can be made on the same manual noodle cutter as the sequins, but you no longer need to shred the “noodles” with scissors. The rain will be less confused and will last longer if you put on it not a baking sleeve, but silver or gold, or just colored, shiny plastic.

But the “shaggy” home-made tinsel is made just from an aluminum baking sleeve, like a corrugated paper garland. Then the ribbons twisted into a spiral will not unfold themselves. As for the tinsel-"sausage", it is still better to buy it. Without special equipment, long pieces cannot be made, thin strips interlock and stick together. You can make short cuts for the branches of a table tree, but this is another vast in the vast.

Wreath

The New Year and Christmas wreath is older than the New Year holiday and older than any of the current reckonings. His lineage is lost in druidic antiquity; it is only known that the ancestor was made from mistletoe and holly branches with red berries, and the meaning of the wreath of the Druids was such that it would not be said by night.

In Russia, the New Year is celebrated relatively recently. Before Peter the Great, the years were counted “from the creation of the world” (now according to the Orthodox Slavic calendar 7524 GM, there is also the Orthodox Byzantine; according to the Hebrew - 5775. In what.); the beginning of the new year fell on March 1st and this day was not distinguished by anything special. For the first time, by decree of Peter, "with great noise and revelry" and "decorations from branches and trees of pine, spruce and juniper", was celebrated on January 1, the year 1700 from the Nativity of Christ.

The Christmas wreath entered the festive life of Russia just a few years ago. None of the world religions attaches sacred significance to the branches of coniferous trees; all the beliefs associated with the New Year's wreath are pure folk art. In general, it is believed that the wreath should contain small red balls (a hint of holly berries), and it should be crowned with a bow with bells, see fig. higher. 2 bells - for the family, 1 - for bachelors and unmarried people (who, nevertheless, can celebrate the New Year by no means and by no means alone); a couple of different sizes - for divorced and single mothers.

All this, of course, is pure convention. From what only New Year's wreaths are not made, see fig. below. The use of a wreath is not forbidden and in the most frivolous way, see fig. on the left above, and the goblin with kikimors of swamp actions seem to be not satisfied with it.

As for a real wreath-amulet and a talisman, it is not difficult to make it with your own hands: spruce branches, natural or artificial, cones, wire frame, balls, bells, bow, and - go ahead, see fig.:

Learn more about how to make a wreath of spruce branches - in the video below:

Video: do-it-yourself wreath of cones and spruce branches

If the wreath is large, with many symbols of abundance and happiness, then a light frame may not be enough, and the blank is needed more impressive. In such a case, see the video:

Video: blanks for New Year's wreaths

An original and popular craft for the New Year is a wreath of pine cones. It is also easy to make, see next. rice. Tinted cones are provided with loops, pos. 1. For this, special sets are also sold, pos. 2, but you can get by with clips bitten by side cutters. The holes under their legs are pricked with an awl, and, having inserted a loop, superglue is dripped under them. It remains to string on a cord or wire, pos. 3, roll the thread into a ring, pos. 4 and decorate the wreath with a bow, pos. 5.

About Christmas Tree Styles

Designers, of course, do not pass by a decorated Christmas tree. But with the style here is a complete mess. Obviously, the same style is called each in its own way, or exactly different - by the same name. However, there is still something in common; especially for small artificial Christmas trees on a conical base. They are very thick, so they decorate them in a minimalist style: 3-4 types of toys of approximately the same size. The canons of style do not concern decorations, they can be arbitrarily pretentious. There are 2 trends in Christmas tree minimalism: “warm”, in fig. on the left, and "cold", in the same place on the right. The choice of one or the other is determined by the general style of the room; finally, just the taste of the owner or customer.

The Christmas ball is one of the great classic symbols of the New Year. The creation of such decorations with your own hands has recently become especially popular; this activity allows you to give the festive atmosphere an exclusive unique look and comfort.

Do-it-yourself Christmas balls were made by our grandmothers at a time when factory decorations were not available. They were made from papier-mache, cheap glass blanks, cardboard and other improvised materials. And now, taking out old toys from the shelves, you feel the warmth of the hands of relatives. Do you want your children to keep those precious memories the same way? Dedicate New Year's Eve to organizing a unique workshop in which members of the whole family will participate, creating their own fantasy New Year's balls.

Decorating blanks

One of the easiest ways to create your own Christmas tree decorations is to decorate the blanks that are sold in all craft stores and are inexpensive. As such devices, you can buy cheap simple balls.

Prepared balls from different materials:

• polystyrene;
• plastic;
• glass or ceramics;
• cardboard;
• tree;
• fabrics and padding.

Foam blanks are perfect for decoration with special pins and sequins, beads and beads. Such needles are easy to stick into soft foam, laying out any ornament.

Styrofoam ball and sequins

Plastic balls can be pasted over with a variety of materials: cloth, paper, sequins, beads, twigs, cones, dry leaves, varnished or painted. This is a wonderful and affordable option for decorating.

Jewelry made from natural materials

Glass and ceramic blanks are ideal for decoupage, coloring with paints. Some glass balls can be decorated from the inside, which means filling it with gel, water, creating a beautiful composition with a plot inside the ball (for example, a New Year's ball with snow), putting tinsel or other decorative material there. Ceramics is a stylish and expensive option for coloring.

Like glass, you can use transparent plastic balls. It will be cheaper, but no less beautiful and safer.

Christmas ball with glass snow

Cardboard blanks are often used for children's crafts. Any parts can be easily attached to them with glue.

Wooden toys are painted with special paints, varnished. Before that, you can cut a fantasy pattern on them. Decoupage technique, burning and, of course, gluing with various materials is also a good idea for such blanks. In the photo below, a wooden New Year's ball is decorated with a dense thread.

Wooden blank decor

Christmas toys-balls can be sewn independently. Taking a piece of matter and putting a filler (cotton wool or synthetic winterizer, foam rubber) in the middle and making a kind of bag, you can get a convenient blank on which it is easy to sew any decorations.

Decorating a glass ball with beads

An exclusive Christmas tree decoration can be made in a couple of minutes if you have a plastic or glass blank, beads, lace ribbon and all-purpose glue. This craft does not require special skills, you just need to be careful.

Following the photo below, we apply glue to the New Year's ball and evenly distribute it with a brush. Then, until the glue has dried, sprinkle the workpiece with small beads, pressing each detail a little and ensuring that the beads fill the entire surface.

It remains to thread an openwork ribbon into a loop and let the toys dry.

Making a glass ball with beads: applying glue

Glue must be spread over the workpiece

The blank with glue must be covered with beads

Ready-made Christmas balls (photo)

This method of decor also has a minus - the beads can crumble over time. This can be avoided by sticking it from the inside - fill the transparent ball with glue and pour enough light beads or sparkles into it. Then you need to properly distribute the beads, rolling the ball. Having fixed on the glue, the beads will decorate the transparent walls from the inside and will not crumble later.

We decorate a transparent ball with beads from the inside

We keep memories in New Year's toys

Winter holidays are traditionally considered family holidays. A great idea is to make several toys every year, symbolizing the changes that occur with loved ones in time.

While your kids are still small and their feet can fit on the balloon, make prints of their feet on paper and transfer their image with paint to the decoration, so that later you can remember how small and cute they were.

Christmas tree toy with the image of the legs of a child

Another idea is to place a photo of your loved ones inside a transparent blank, surrounded by tinsel or other decorative details. You can also use the photo to glue the ball on top, complementing this design with beautiful ribbons, as in the illustration below.

Photo ball

Christmas ball decor with cloth and paper

Decorating Christmas balls with cloth and paper is one of the easiest ways to decorate such toys.

You just need to wrap the toy with a cloth or wrap a blank in it and fix it. The main thing is to find a unique and interesting material, since it is he who will play a major role in such a design.

Christmas tree decorations made of fabric

The ball should be placed in the middle of a piece of fabric

Then secure the fabric with tape.

Decor is ready

Decorating with paper is even easier. An interesting way of such decoration is presented in the photo collage below. The workpiece was pasted over with newspaper tubes, and then the entire surface was painted over with gold spray paint. An elegant ball for the Christmas tree is ready!

Decor for a paper ball

A great option is to make jewelry from threads. If you know how to knit (crochet is best), it will be easy to do: you just need to knit it according to one of the patterns, and then starch the product, after putting it on a balloon of the right size (sugar syrup can be used instead of starch).

Crocheted toys for the Christmas tree

You can make Christmas balls, the photo of which is posted below, by simply winding the threads around the ball and smearing it with PVA glue. When the toy dries, taking the desired shape, the ball must be removed and decorated with glitter varnish.

Ball for the New Year from threads

Coarse twine can be wound around the workpiece, after applying glue to it. This decoration in country style looks very relevant.

country style balloon

Decoupage toys

Decoupage of Christmas balls is one of the most sophisticated ways to decorate blanks.

The specific technique for performing this decor depends on the base material for the pattern. It is best to choose glass, ceramics or wood for this.

We will use the following components:

• napkins for decoupage with the image of a map of the world;
• scissors;
• decoupage glue and finishing varnish;
• blank for a foam ball;
• ribbon and eyelets for Christmas decorations;
• brush.

Christmas balls (master class): materials

Manufacturing:

• We make a hole in the foam blank to secure the loop.
• Cut out the image of the desired size from napkins.
• We apply glue to the workpiece, apply napkins and carefully level it so that there are no “bubbles” of air. Let's dry.

Add ribbon and necessary accessories.

Our ball is ready!

Making a hole for the tape

We prepare drawings from special paper

We apply glue to the surface of the workpiece

Carefully glue the paper, and the ball is ready!

Thus, almost any pattern can be applied to Christmas tree decorations. Among children, New Year's Smeshariki are the most popular. Paper with these characters is not difficult to find, but the toy will become the most popular with your child.

Christmas balls, a master class on the manufacture of which you could see among our photos, is not only a wonderful craft for the whole family, but also a good gift created by your imagination and souls. Fill your home with things that have true value, and therefore are a real treasure, because joint creativity over the years does not lose its relevance, but gives memories a special entourage!

Decorating paper balls

Rustic or country style jewelry

Master class on decorating balls with lace

Ball made from natural materials

Decoupage toy

Simple decoupage of a cardboard blank

Comfort to your home!

We will send the material to you by e-mail

New Year, New Year is coming to visit us ... And very soon the landscape outside the window will delight with snow, frost will pinch your cheeks, and the Christmas tree in the house will expect a worthy decoration. We will not consider the range of finished products, but we will create something fabulous, amazing and original.!

The most accessible material: how to make a Christmas paper ball with your own hands

Initially, glassblowers made toys for the Christmas tree, but today, thanks to a large number of different materials, a New Year's miracle decoration can be made at home on your own. The paper industry offers different types of products: velvet, waxed, glossy, corrugated, colored. Creative people have taken advantage of this handy material, and the world has seen origami balls, ruffled roses, and more.

Delicate balls for the New Year: we create from corrugated paper

Corrugated paper Christmas tree balls are made by both adults and children. Soft paper is easy to curl and shape. The color palette allows you to make a decoration that looks perfect indoors or on the Christmas tree.

If you make several different-sized balls with a floral decoration, then the Christmas tree will be decorated in the same style

Illustration	Action Description
	We will prepare corrugated paper of any color, a ruler, scissors and a thermal gun.
	Several strips about 0.8-1 cm wide should be cut from the paper. Each strip must be twisted around its axis.
	We get several long flagella. We put a drop of hot glue on the tip of one and begin to fold the flagellum around ourselves in a different direction.
	We continue to wrap the resulting ball with a tourniquet.
	As soon as one tourniquet ends, we fix it with a drop of hot glue and attach a new tourniquet to the ball. Work continues until the toy reaches the desired size.
	In this way, you can get a lot of beautiful decorations of different colors.

Advice! To make the mood completely New Year's, you can grease the balls with PVA glue and sprinkle with glitter.

Paper tube balls

New Year's paper balls can be made in the manner described above, but only from ordinary newspaper tubes. Such decor is also used after the New Year - there will be no need to hide beauty in a distant drawer.

Illustration	Action Description
	We cut strips from newspapers about 5 cm wide. We prepare a thin long knitting needle and PVA glue for work.
	We begin to wrap the strip around the knitting needle so that there is an acute angle between them. As soon as we reach almost to the end (not finishing 2 cm), we coat the remaining triangle of paper with a drop of glue, wind it up and hold it with our fingers for several seconds. We carefully remove the knitting needle from the tube and begin to make the next one.
	We dip the finished tubes one by one in paint or wood stain of a suitable shade. It is better to lay the painted tubes on a sieve.
	First, we roll the tube into a ring and fix the bagel with hot glue - it will be faster. We wrap the resulting ring in random order. Gradually, our ball grows and becomes the size we need.

Balls of paper flowers, templates and music strips

We will learn how to make a Christmas ball with your own hands using blanks from paper flowers. There are two options for getting a lot of floral elements: purchasing a figured hole punch in the form of a flower or using a cardboard template. The second method promises a large investment of time and effort, but if you do it with the whole family, then the minus turns into a significant plus.

Origami balls and kusudama

Not everyone has a relationship with origami, but when else to show patience if not for a holiday that promises miracles? We gather our will into a fist and take on a very interesting activity - we turn paper into a voluminous toy. The kusudama technique is complex and requires perseverance, but look at the results you can achieve!

Folding such beauty is not easy, and, probably, an elegant ball may not work the first time. It is better to try first to collect it from newspapers, and only then try your hand at colored paper. We offer several schemes for assembling such an ornament.

You can start by assembling one element. As soon as such an origami flower appears in your hands, you will want to make them more and more

Related article:

How to make a New Year's wreath with your own hands: the history and tradition of occurrence, a master class on creating what to make the basis for the product from (newspaper, cardboard, pipe insulation), decorating the New Year's wreath with various materials - read the publication.

We work with felt: how to make Christmas balls with your own hands

How to make Christmas balls if you have a lot of felt of different colors? We select suitable floss threads, take a needle, scissors, a little synthetic winterizer and a good mood.

Felt flower balls

Children can also build a beautiful ball: it needs a foam base and a lot of tailor's pins.

Balls with felt appliqué

Felt is easy to cut, easy to sew by hand, requires almost no effort: a miracle, not a material. We take a cardboard circle template, apply it to the felt and cut out two identical circles.

We sew the mugs together with a buttonhole stitch with bright threads, but leave room for stuffing. After the ball has grown and has become like a decoration, the stitching is completed to the end.

How to make a Christmas ball out of fabric

Woven material is presented in a wide variety, and much of this splendor can be used as decoration for a Christmas tree decoration. Ribbons, satin pieces, linen cuts, even floss threads - everything goes into business.

Balls for the new year from ribbons: a master class

Ribbons are cheap, their choice is large, and the work does not require special skills.

Illustration	Action Description
	We are preparing two types of satin ribbons, tiny carnations and a foam round base. We cut the ribbons into equal pieces (2.5 × 6 cm) and one square. We take 1 largest piece and place it on the base, securing it with carnations from each corner.
	In the center we glue the decor (bead, half-bead, rhinestone)
	We work with segments of a different color.
	We fold a piece of a different color into a triangle.
	We apply the triangle with the front side as in the photo and fix it in the corners with carnations.
	We do this three more times. There is a small distance between the triangles.
	Having done so one row, we begin the next.
	We alternate the colors next to the very end or to the middle of the toy. In the second case, a pattern of triangles is also drawn from the back side, expanding it towards the middle. A satin ribbon is glued in the center, which is tied with a bow.

Patchwork or kinusaiga: shreds and New Year

Christmas decorations from balls can be decorated using the patchwork or kinusaiga technique. Patchwork is patchwork, and kinusaiga is almost the same, but the basis is foam, and there is no need for seams.

The final result depends on the material chosen. The phrase is simple, but when faced with the need to create a beautiful craft, many people get lost. We will show you how to choose an original decor and surprise everyone in the coming New Year.

Beads, beads

Beads and beads will be a stunning decoration for Christmas tree balls for home decor. There are several ways to create an interesting design using this material: depending on the chosen one, you will need a fishing line, thread or a thermal gun.

Acting according to the patterns of weaving from beads, they get a non-standard decorative Christmas tree toy

Sequins will add brightness and shine to the Christmas tree. Their cost is not particularly high, they are attached to the ball with glue

Buttons and pasta

Kids will love the button decor: the colorful buttons are easy to stick with ceiling tile adhesive and don't require painting. Although, if desired, you can paint the entire toy at once from a spray can.

How else can you decorate Christmas tree balls: ideas with fingerprints, stained glass paints, salt

If you do not deny yourself the manifestations of fantasy and imagination, then a look or thought will definitely find non-trivial ways to decorate New Year's toys.

A New Year's ball with snow is obtained if the base is thickly coated with PVA glue and rolled in salt and sparkles. The second way is white acrylic paint: it is applied with a sponge on a toy

How to make do-it-yourself decoupage balls for the New Year

Decoupage technique is gathering more and more lovers of beautiful sophisticated decor. The product requires a base ball, a beautiful New Year's napkin, PVA glue.

We take a toy and smear it with PVA. We tear off a piece from the napkin and apply it to the ball. We straighten the passage with a brush, avoiding irregularities and breakthroughs.

New Year is a holiday that creates a mood, gives a feeling of family warmth and a fairy tale. And, as you know, a fairy tale comes only where it is expected! Let's make a special New Year with beautiful balls for the Christmas tree!

Save Time: Featured Articles Every Week by Mail