Physician professional publications 

Decoupage flower pots. Your experience. Decoupage of a flower pot "Hares in a birch forest" using craquelure

Fans of home vegetation will understand me. So you want your favorite flower to have a decent "clothes". Sometimes it is very difficult to find pots that fit perfectly into the interior, and in which our home flower was comfortable and cozy. There is a way out - to create a pot that is perfect for your favorite plant and will become an integral decorating element of your home interior. - a technique that will help us with this.

To decorate a flower pot, we need:

  • ceramic, clay or plastic pot
  • napkin with your favorite pattern
  • PVA glue
  • acrylic paints - white, light green, green

We begin to decorate our pot.

1. We paint our pot with acrylic paint - completely outside and 3 cm from the edge from the inside.

In order for acrylic paint to take better and last longer, you need to properly rub our pot with sandpaper.

2. After it has completely dried, we glue the fragments of the picture torn from the napkin. To do this, use glue diluted with water in a ratio of 1: 2.

Glue very carefully, leveling all the folds of the napkin pattern from the center to the edges.

3. After complete drying of the place on the pot, where there is no napkin, you need to finish painting with light green and green paint in order to get a single solid drawing. When the paint is completely dry, it is necessary to varnish the flower pot.

Our flower pot is ready!

Decoupage of flower pots is an interesting activity that allows you to add a little warmth and comfort to the interior. Almost everyone can easily realize themselves in this craft, since the necessary materials and information are now available. This technique allows you to work with blanks made from a variety of materials. When decorating flower pots, a layer of moisture-resistant varnish helps to additionally protect the product.

Master class on decorating a pot in the style of "decoupage"

Necessary materials for creativity

To work in the decoupage technique, a set of certain tools and materials is required. When decorating flower pots, the planters themselves are needed, which can be plastic or ceramic. The pattern on the front side is obtained by gluing napkins, drawings from decoupage cards or applying acrylic paint.

Basically, paint, glue, varnish will be required for work. It is a good idea to use a primer before painting to enhance the adhesion of the decor to the surface of the pots. Glue can be used specially designed for decoupage, stationery PVA can be diluted with water in a ratio of 1:1, 1:2 or 1:3.

You can achieve the effect of old cracked paint when using craquelure products. On sale you can find such varnishes: Creall Crackle, Decola, IDEA, Maimeri and others. These compositions can be single-phase and two-phase. In general, the essence lies in applying the product on the craquelure, the appearance of cracks and further drying. Using pastels or oil paints, carefully fill in the cracks.

You can achieve the effect of old cracked paint when using craquelure products: Creall Crackle, Decola, IDEA, Maimeri and others

To preserve the work for a long time, it is covered with a covering layer of varnish. For these purposes, you can use a variety of tools with a matte or glossy sheen. It is worth paying special attention to the fact that some varnishes are afraid of prolonged exposure to moisture. When decoupage flower pots, this important point must be taken into account, since water often accumulates in pallets, which can damage the decorative layer.

The main stages of decoupage flower pots

The basic scheme of actions for decoupage of flower pots consists of the following steps:

  • surface preparation (removal of labels, stickers, degreasing, applying a layer of soil);
  • covering with a covering layer of paint (acrylic options are good);
  • image preparation (cutting out the motif, separating the top layer of the napkin);
  • gluing the image to the front side of the cache-pot;
  • other methods of decoration (craquelure, gluing rhinestones, stones, shells, twine, etc.);
  • protective layer of varnish.

All actions in the decoupage technique are performed in a certain sequence

The decoupage technique is quite simple. It is necessary to sequentially perform some work: 1 - prepare the workpiece, 2 - pick up an interesting napkin, 3 - cut out the required number of patterns, 4 - separate the top layer, 5 - stick the patterns on the workpiece, 6 - dry the product. After these stages, you can proceed to further decor or leave it as it is, covering it with a layer of protective varnish.

The work can take several days, depending on the speed of drying materials: glue, varnish. Estimated time, as a rule, is indicated on the packaging of the product. It is convenient to apply materials with brushes with different numbers, rollers, sponges. Their quality should be checked in advance, since it is unpleasant when the villi remain on the painted surface. Easy to use synthetic brushes.

A top coat of paint is applied to the surface of the pots to create a more interesting backdrop for the pictures. Acrylic products Idea, Gamma and others have proven themselves perfectly. These paints dry fairly quickly. After that, you can start applying the napkin. To begin with, the surface is covered with a layer of glue and a napkin is carefully applied, leveling all its sections. This work does not tolerate haste, but even if a small marriage has formed, for example, the napkin is torn in some place, then its edges are carefully connected and allowed to dry. The image can be applied to a dry pot, and then glue is applied.

A zealous hostess has a use for any thing! A well-worn teapot for her is not trash, but an ideal pot for outdoor flowers. Well, the decoupage technique will help give it a designer bow!

A variety of ideas for decorating flower pots using decoupage technique

Even very young craftswomen can do decoupage of pots, but everyone can find themselves in this business. Using such a fairly simple technique, you can transform boring planters and make real works of art out of them. All that is required is knowledge of the basics and the desire to learn. With imagination, you can create really wonderful products that will please the eye for a long time.

You can decorate flower pots in different ways. A wide variety of materials are now available to make this process simple and fun. For example, pots with glued beads and stones look good. You can attach them using various types of glue. These decorations hold well on the Moment tool.

Pots with glued beads and stones look good, which hold well on Moment glue

Another great idea is to combine several techniques on one piece. So the missing elements are drawn. For example, you can take a motif containing flowers or poultry, stick it on, and then, using green acrylic paint, put a pattern of thick grass on the bottom of the pot. In addition, contrasting colors are combined, highlighting a certain part of the product.

You can alternate repeating patterns or combine several different images on one planter. There are actually a lot of ideas. It is interesting to look at a series of pots made in the same style using geometric patterns: lines, zigzags and other things. It is acceptable to use structural paste, which allows you to create a variety of textures on the surface.

Color harmony and the choice of a good image for flower pot decor

Decoupage of a flower pot with napkins requires the selection of a good color scheme and a good image. Plants and flowers always look great on such products: sunflowers, tulips, lilacs and more. It is not bad to settle animals on the pots: hedgehogs, birds, insects.

Drawings containing plants and flowers always look great on flower pots.

In order for the decorated product to harmoniously fit into the interior, it is necessary first of all to determine what exactly will attract attention: a pot or a plant located in it. If the pattern is chosen bright, catchy and very contrasting, then the look will certainly go to the cache-pot. This is not always correct. Those pots that emphasize the beauty of the plant look gorgeous.

It is better to give preference in color to shades of green, yellow, brown. It is good if the pattern chosen for the decor includes bright blotches of blue, red, purple. You should not make the pot too colorful, overload with images.

The most important rule that should be followed when choosing a color scheme and pattern is personal, subjective preferences. A handmade product should please the owner. Therefore, if you like lush roses, you should opt for them, and if the whole house is designed in the style of minimalism, geometric shapes will be ideal.

Stylish flower vases for a real lady! Bright, elegant, refined - as if they had just stepped off the catwalk after a haute couture show ... With such elements of interior or exterior decor at home, you are simply guaranteed an excellent mood!

Important nuances in the technique of decoupage flower pots

The decoupage technique is quite simple, but requires some skill. The most common problem that craftswomen face is the formation of wrinkles during gluing the napkin to the surface. Sometimes such a defect is even handy. If desired, you can even enhance the effect by adding structural paste to significant places, for example, the middle of the inflorescences.

Prevent the formation of wrinkles during gluing in various ways. There are various recommendations for applying glue to a napkin. It is convenient for some to work with hard wide brushes, while others have adapted to smooth out the folds with their hands. The rational idea is to eliminate defects with fine-grained sandpaper. In this case, you must act very carefully so as not to damage the pattern.

The most common problem during decoupage of pots is the formation of wrinkles during gluing the napkin to the surface.

When decorating clay pots, it should be borne in mind that this material is hygroscopic, that is, it is able to absorb moisture. Such a product is best used in the form of a planter, inside which is placed a regular plastic container. It does not hurt to apply a layer of protective varnish that is not afraid of moisture.

Looking at the photo of the decoupage of flower pots, you can highlight several interesting ideas that are suitable for a particular interior. It is not necessary to completely copy, you can simply note for yourself the good location of the drawings, interesting elements, and so on. Decoupage looks extremely successful on a light background, which allows you to highlight all the elements of the image.

Combining decoupage with craquelure, you can give the flower pots the effect of antiquity

Using the decoupage technique to decorate flower pots allows you to get interesting interior items. With their help, you can successfully decorate a boring window sill, furniture. The field for creativity here is extremely wide. Decoupage is a fairly simple technique, having familiarized yourself with the basics of which, you can create beautiful and stylish products.

plastic pot transformation

Converting a plastic pot. Master class in craquelure and decoupage technique

I decided to show how you can change the look of an ordinary plastic pot for plants. In this thread, we will immediately consider two techniques - craquelure and decoupage.

1. We have a regular plastic pot.

At first I did not plan to change its appearance, so I bought a glossy one, but for processing in the craquelure style it is better to use pots with a rough surface.

2. Be sure to make a drainage hole.
You can use any heated metal object, but then we will have to breathe in the fumes of melted plastic, and this is very harmful to our health. For these purposes, I specially purchased a set where there are drills of different sizes, they are easy to change and very convenient to use. When assembled, the hand drill looks like this.

The main thing is not to press hard so that the plastic does not burst.

3. If you still have a glossy pot, it must be treated with sandpaper before painting. We take sandpaper No. 120 or 125. We carefully rub the entire outer side and the inner side from the top 1.5 - 2 cm from the edge and do not forget about the saucer.

4. Now we wipe from dust and degrease with alcohol.
Alcohol can be bought at any pharmacy and poured into a spray bottle. I used a hand sanitizer bottle, very handy.

5. Start painting.
My pots will be exposed to direct sunlight in the summer, so that the roots of the plants do not overheat, I used light colors (gold and white).
And so, in the usual construction super-market we buy gold and white acrylic paints, antique intermediate varnish, waterproof varnish and, of course, brushes.

6. We paint the entire surface of the pot with gold, do not forget about the inner upper edge.
It is not necessary to try to paint over the pot with one layer, the paint dries quickly and after 20-30 minutes we apply the second layer. Despite the fact that I have a dark-colored pot, I was able to paint over in two layers, but if this is not enough, I will have to apply another layer.

7. After complete drying, we take on antique varnish. We apply the varnish in one layer and only in one direction, in this case we apply vertical strokes.
After 15-20 min. Gently try with your finger to the touch. The varnish should not dry completely, otherwise there will be very few cracks, the varnish should cling a little.
Now we take white paint and apply brush strokes perpendicular to the varnish, in this case horizontally. Do not forget to take into account that white paint lays down in one layer.
For half an hour we can observe how cracks appear.

We can also apply white paint not with a brush, but with a disposable bag. We take a plastic bag, crush it, dip it in the paint and apply it on the pot with patting movements. Then the cracks have a slightly different pattern.

It seemed to me a little to decorate the pots using the craquelure technique, because I also used the decoupage technique.
8. Now we take any napkins and cut out the element that we like best. Usually a napkin consists of three layers, but we only need a colored layer of the top ones, so we stratify the napkin. We glue the drawing to the surface with PVA glue or any other and gently smooth it.
To protect our pots from exposure to water and moisture, we must apply a waterproof varnish and it will be better if we apply it in two layers.
And now our pot is ready.

Here everything already depends on your imagination.

Any hostess is interested in making her home cozy, beautiful, and enlivening it. Fresh flowers are a chic decoration for every home. Not a small role is played by the pot in which the flower is planted. Often you have to face the fact that ordinary flower pots are not beautiful enough, make the interior simple, boring, and designer ones are not affordable for everyone. DIY flower pot decor is a great solution to this problem! After all, you can decorate the pot as you wish, and you will also have the opportunity to show off your own work to the guests.
In this article, we will talk about different ways of decorating that will enable you to easily make elegant flower pots.

Marine motif

Everyone in the house who has ever been to the sea has a collection of sea shells, pebbles, multi-colored glass. It is these souvenirs that can be used to decorate flower containers. Sea pebbles, glass can be found in any store, now this is not a problem. Quite beautiful is the combination of marine souvenirs with various small items (coins, buttons, fragments of broken dishes, tiles).


It is very important that before you stick the shells on the flowerpot, be sure to wash and degrease them.
It is best to glue the parts on the surface of the container with building glue, which has a high viscosity and dries quickly enough. In order to better strengthen shells, stones, glue must be applied to objects and to the pot. After applying the glue, the decor elements must be pressed to the surface of the container and held for a couple of seconds.

After that, with the convex side outward, a fragment of the shell is attached. It must be attached tightly to the surface, but very carefully so as not to break it. You can correct the position of the parts with a needle or a toothpick. After all the work done, the decorated surface is covered with PVA glue.

Decoupage technique on a flower pot

Decoupage is a decoration method that uses various paper pictures, cut paper, napkins. This technique can be used on clay, plastic, corrugated pots. The technique is very simple.

Making decor with your own hands, you can distinguish the following stages:

  • preparation of the pot (removal of unnecessary elements, degreasing, priming pots);
  • coating with paint, which acts as the basis;
  • work with paper, namely: cutting out the necessary motive; preparation of a napkin, since only its top layer is used;
  • flower pot decoration (gluing paper to the surface);
  • decoration with additional materials;
  • fixing varnish.

Beads and beads will add special sophistication to the decor of flower pots.

Unique decor with do-it-yourself lace and burlap

Very gentle and magical is the way to decorate flower pots with lace or lace with burlap.

The use of ropes and threads for decorating pots

The use of ropes and threads takes place in different ways of decorating a flower pot. They act as an additional element that will betray the product of sophistication. For example, you can decorate a flowerpot with burlap, give it tenderness with lace, tie everything (without using glue) with a brown thread or rope. This method will emphasize the shape of the flowerpot, make it beautiful.

Fabric decoration - master class

Decorating flower pots with fabric is an easy way to update and decorate your planters.
You can choose one fabric for decoration for several pots, making a certain ensemble, or different, at your discretion. The finished product can be decorated with lace, beads, etc.
Necessary:

  • flowerpot;
  • the cloth;
  • glue;
  • brush;
  • scissors.

We start by cutting off the necessary piece of fabric. In width, it should completely cover the flowerpot, in length it should be slightly larger in order to envelop the bottom and top of the inside of the container.

Flower pot decor with decals and drawings - master class

A drawing or an inscription on a flower pot looks very mysterious, they bring a certain touch of magic. Transfer inscriptions and drawings on earthenware look very chic, but you can also experiment on plastic and ceramics.

Getting Started:
In order to give the surface an unusual relief, we decorate it with paper and glue. We breed glue with water (about half of the glue, 1: 1). Tear the napkin into small pieces. Using a brush, apply glue to the napkin and glue it to the surface of the dish. With a stick we make small relief folds. In this way, we glue all the free space and leave it for a while.


After the glue has dried, proceed to millet. To begin with, we apply undiluted glue to the folds, then sprinkle grits on top. Wet with a sponge and leave to dry.
Next, let's start painting. Using a brush, completely paint the pots in silver color, dry.
After the paint has dried, decorate the flowerpot with golden paint, painting only the part where the millet is poured. Top coat with varnish.


There are flower pots in almost every home, and very often the hostess would like them to serve not only as the place where her favorite plant grows, but also to see them as an unusual and harmonious part of the interior. But it is often very difficult to find suitable flower pots in the right range of shades, and even more difficult to choose a pot with a pattern that suits your interior. The author of this idea, we suggest that you familiarize yourself with a simple, but very beautiful and effective method of decorating flower pots - this is with the help of napkins. Napkins are now presented in a huge assortment and it will not be difficult to choose the right ones for your interior. Let's heed the advice of the author and give new life to an old flower pot that will perfectly fit into the interior and will delight your eyes every day.

For work you will need:
1. Old flower pot.
2. Sandpaper. The author uses K-120 size 20*20 cm.
3. PVA glue.
4. Napkins with a matching pattern.
5. Acrylic primer.
6. Acrylic paints.
7. Brushes for applying varnish and glue.
8. Scissors.
9. Foam rubber sponge.
10. Tray.
11. Dense file.

1 step.
To begin with, wash the pot well with a brush and detergent and dry it well. To speed up this procedure, you can use a hair dryer, as the author did, or you can simply leave the pot to air dry.

Then, using sandpaper, carefully sand the pot.

In the same way, we sand the plate that comes with the pot (tray for water accumulation). This procedure is very dusty, so the author advises to carry it out on the street or on the balcony. After this procedure, the surface of the pot and tray should be smooth, the old paint should not bulge anywhere or crumble.

Now you need to rinse the pot from dust and dry it well again.

2 step.
Then we take the acrylic primer and apply it with tangential movements, pressing a piece of foam sponge against the surface of the pot. The layer of soil should not be thick, otherwise, after drying, it may crack. Now let the soil dry very well.

Now you can apply the main background color. In this case, the author used three spoons of white paint and a few drops of yellow. You are guided by the color scheme that prevails in your interior and also consider the size of the decorated pot.

It is also necessary to remember that the background color is simply obliged to be in harmony with the napkin you have chosen.

Evenly apply the background color to the pot with a sponge.

If you have a small roller in your household, then the author strongly recommends applying paint with it. In this case, the paint layer is thin and applied evenly.

We apply the same paint on the pallet for the accumulation of water. Since the shape does not allow using a roller for high-quality paint application, we apply the paint with a sponge. In order not to get your hands dirty and paint over all hard-to-reach places with high quality, the author recommends using a clothespin as an applicator. Dry the painted blanks well.

If you have a small amount of paint left, collect it in a small jar.

Be sure to close the jar with a tight-fitting lid. Paint may still be needed, but it is very difficult to achieve exactly the same shade with a new mixing of paints.

3 step.
Let's get to work with napkins. To begin with, we will carefully consider the napkin and finally decide which of their elements you would like to see on the updated flower pot.

We cut out the fragments we like and separate the top layer from this piece, on which the drawing itself is directly applied.

Take a thick file and a tray, put the cut out piece of napkin with the colored side down and pour some water.

Very carefully with a brush we distribute water over a fragment of a napkin. In this way, you stretch the napkin fragment on the surface of the file and this will help you avoid creases and folds in the drawing when transferring it to the flower pot.

Then, very carefully, lift the file and gently drain the water from it, making sure that a fragment of the napkin remains on the surface of the file.

We transfer the picture from the file to the surface of the pot. To do this, we attach the file and a fragment of a napkin to the pot and carefully smooth it.

Carefully remove the file so that the motif cut out of the napkin remains on the surface of the pot. If necessary, use a brush or hold the motif with your fingers.

We fix the motif with PVA glue, apply glue with a soft brush on top of the motif. If wrinkles are formed, carefully smooth them with your fingers in the direction from the center to the edge of the pattern. Dry the workpiece well.

If the folds still turned out, carefully, without pressure, sand them with sandpaper.

If the borders of the napkin turned out to be very noticeable, take a sponge and the previously remaining background paint and paint over the resulting transition with light tangential movements.

4 step.
Then we mix paints for the border of the future product.

Sponge paint on the edges of the flower pot.

Paint the edges of the water collection tray with the same paint. Dry the blanks thoroughly.

5 step.
Now we will cover the pot with acrylic varnish in several layers. Be sure to thoroughly dry each applied layer of varnish. And do not forget: the amount of varnish affects the service life, the more layers, the more durable the product is in the end. The author in this case applied 10 layers of varnish.

And now a chic flower pot is ready, to which you gave a new bright and colorful life.