Mk crochet dresses for dolls. Well, the crochet dress and hat for the doll are ready.
A doll 41 cm high was chosen as a model. We will knit a dress for this doll on circular knitting needles, we use children's acrylic yarn in three colors - it is soft and inexpensive, easy to knit, the most for toys and accessories. Leftovers are also suitable, yarn of each color needs about 30 grams. For those who find it difficult to close the loops with knitting needles, you will need a hook. If you want to do embroidery, as in the photo, then you need a needle with a wide eye. Well, buttons or Velcro as a fastener.
Let's get to work: knitting will go from the neck of the dress to the bottom, and the sleeves are not knitted separately, but will be obtained from the main fabric. This type is called "raglan". Cast on 36 stitches. We look at the diagram: 4 loops, indicated by circles, will be raglan.
Raglan pattern
1. Cast on 36 stitches.
2. First row - purl loops. Further, in all facial rows - facial, in the purl - purl (you will get the front surface without patterns). Increases begin from the third row. In general, in each row of the front side, an increase is made to the left and right of the raglan loops. It turns out that in the third row 8 increases were made (two for each raglan loop) and there are already 44 loops on the knitting needles.
3. By the same principle (making increases in each front row before and after the raglan loop), we continue to knit until, when trying on a doll, the part closes in the armpits.
4. As soon as the desired length is reached, from now on we stop adding loops. We knit the back and front just with a stitch, we close the loops on the sleeves. The thread does not break anywhere.
5. This is how it should turn out if everything was done correctly: the sleeves took shape.
6. Now we shift all the loops together and knit a straight fabric to the waist.
7. We take the yarn of the second color. On the front side, one row of facial loops and on the wrong side again a row of facial loops - this will turn out a relief strip.
8. In the row following the embossed strip, we make increases every three loops. The hem of the skirt expands. After three rows of the front surface, we knit a row with increments. Rows 10-15 just straight, depending on the desired length of the hem of the dress for the doll.
9. Embossed stripe with yarn of a different color.
10. Row, where every three loops increase, and straight knitting to the very end, that is, the desired length. At the end, close the loops. I did this with purl stitches, so the edge turned outwards. It turns out here is such a wide detail, which, when sewn together, will miraculously turn into a dress.
11. We decorate the future dress, knitted for the doll with knitting needles, with yarn embroidery. Since it turned out to be quite simple, it would be nice to focus on decoration. The photo shows how easy it is to embroider flowers.
12. We supplement the plot of embroidery with beads and curlicues.
13. Fold the dress and sew the hem. We organize a fastener on the back. If you knitted a dress with knitting needles for a little girl, then Velcro is best. Nowadays, it is easy to find in any needlework store. In my case, the girl already knows how to fasten buttons, so I use them. On one side we sew buttons, on the other - loops of yarn.
14. We admire the finished dress. If necessary, wash and steam with an iron.
For a doll. How to be in such a situation? After all, the product must be very small. With the thickness of the yarn and the size of the hook, everything is clear, they should be as thin as possible. But what about the scheme? Which model to choose so that it was easy to knit and at the same time crocheted dresses for dolls looked no worse than purchased ones?
bodice
To shorten the description of how the work is done, the following notation has been introduced:
A knitted dress is usually made fitted, so the bodice will almost always be the same. But the rest of the elements will have significant differences. So, for example, the sleeve can be made short or long, wide or narrow. In the considered description, a flashlight sleeve is given.
Sleeve
The entire product will not be stitched, the elements are supposed to be knitted on those that already exist. You need to continue to crochet a dress for a doll like this: put the bodice with the wrong side towards you.
If you want to knit a long sleeve, then you need to repeat the first row several times. And then at the end, knit the pattern that was indicated for the second row of the short sleeve. If you do not want to sew the details, then here you will need to knit in a circle.
Collar
You can leave the dress for the doll without it. But with a collar, it will look more spectacular and more elegant. So, to knit a collar on a dress (crocheted) for a Barbie doll, you need to dial a chain of 70 loops, the first of which will be used for lifting.
In the first row, you need to connect 69 columns of BN. The second must be connected with the same elements and in the same quantity after one lifting loop. Only the back half loops of the tops of the previous row are supposed to be captured. In the same way, you need to tie another 9 rows.
In the eleventh row, after one air loop, tie 29 columns of BN, repeat four times: two stBN with one top and stBN, then another 28 stBN. The last row will play the role of strapping. It starts with a BN column, then until the end of the row you need to repeat this pattern: 3 air, decrease and BN column.
For fastening it is convenient to use a hook here, which must be sewn to the ends of the penultimate row.
The fourth (largest) detail of the dress for the doll: the skirt
This item of clothing can also vary. It can be large and wide or narrow and short. And someone wants to make the skirt of the dress long and narrowed. Each time you will get a new special dress for the doll (crocheted). The scheme of the wide skirt is shown below. First you need to lay the bodice of the dress with the front side facing you and the waist up. Then the work is supposed to be carried out according to the plan indicated below. Moreover, it must be taken into account that in each row or circle you need to make 4 loops for lifting.
- 1 row: two st2CH in one loop (hereinafter referred to as “extension”) in 24 bases of the bodice columns and another st2CH in the last top.
- 2 row: st2CH, extension - must alternate until the end of the row, which should end with one st2CH.
- 3rd row: knits similarly to the second, only the addition must be done every two st2CH.
- 4 row: now the addition is supposed to be performed every three st2CH.
- Gradually increase the number of columns between additions to the ninth row. In it, the distance between additions should be 7 st2CH. Moreover, from the fifth row, knitting should go in a circle.
- 10 circle repeats the ninth.
- 11 circle of the skirt of the dress for the doll: 8 st2CH and one addition must be alternated to the end of the row, complete it with one st2CH.
- The 12th circle is supposed to be knitted in the same way as the eighth. The same will be 14, 16, 18-22.
- 13 circle: st2CH in the loop of the base of the rise, 10 st2CH and the addition must be alternated to the end of the row, 10 st2CH.
- In the 14th circle of the skirt of the dress for the doll, knit 15 st2ch with one addition, then repeat these elements until the end of the circle until 7 loops remain, work st2ch in them.
- Round 17 consists only of st2ch, which are knitted behind the back walls of the loops.
Such a hem is supposed to be worn with a frame. It can be made from thick cardboard rings connected with thick threads. It should be ensured that the frame is not visible from under the hem. This skirt can already be left in this form, but the girls want to make decorations so that the dress for the doll becomes elegant. For these purposes, you can use thin satin ribbons collected in bows. Crocheted lace or roses can serve as decoration.
Ruffle at the hem
To make a crocheted dress for a Barbie doll look solemn, a simple lace hem pattern will come in handy. To make it, it is supposed to put the dress with the front side towards you and the hem up. Then find the circle where the 16th row ended. He left the front half loops not knitted. They will be lace trimmed.
Dress Decoration: Rose
It is not enough just to know you will have to crochet and decorate for it. On a chain of 24 loops, tie stbn into 6 of them, then repeat to the end of the row - 3 chain stitches and stbn into the second loop. It remains to fasten the thread and roll the rosette, sewing it from the wrong side.
Included with the dress for the doll: a hat
On a sliding loop, tie 6 SS. Then, gradually adding loops, make a circle. Its diameter should be about 3.5 cm. It should be followed by circles without addition. They will form the crown of the hat. Her fields should again be knitted with a large number of additions to the SS. On the edge of the hat, knit an openwork pattern for a lace frill. To make the hat look beautiful, it must be starched.
Good afternoon
It's no secret that girls love to play with dolls.
Dolls are different. Now small dolls have appeared on the market, the size of which is only 10.5 cm. And the clothes for the dolls are not of very good quality. Therefore, they have to invent a wardrobe on their own. One option is to crochet the doll's dress yourself.
To knit a dress for a doll, we need:
- Cotton threads in white and yellow.
- Hook 1.5 mm thick.
- Thread and needle.
- Decorative button.
Explanation of abbreviations:
VP - air loops.
SS - connecting column.
CCH - double crochet.
RLS - single crochet.
We begin to knit a dress for a doll.
First we knit the top of the dress for the doll
1. We collect a chain, which will consist of 16 air loops (VP).
2. From the VP we make a ring. Let's make 2 VP for lifting.
3. We make a set of 31 double crochets (CCH) for a chain of VP.
4. We make a rise from 4 VP.
5. We collect from each top of the columns of the previously knitted row in turn 1 CCH + VP.
6. We connect the row with a connecting column (SS).
7. We cut the thread and thread it on the wrong side. The top of the dress is ready.
We knit the bottom of the dress for the doll
8. To do this, attach a yellow thread.
9. We collect 3 VP and under the same arch we make CCH. Then we make a set of 4 more CCHs (grab at the top of each CCH of the previously connected row and under each VP).
10. To make cutouts for the arms, you need to skip 9 CCH. We introduce the hook into the 10th column.
11. Starting from this column, we collect 16 CCH.
12. We skip 9 more CCHs. Starting from the 10th column, we collect 10 CCH. We close the row of SS.
13. Perform a set of 3 VPs to start the next row.
14. We collect columns without a crochet (RLS). In this case, it is necessary to skip 1 CCH in the previously knitted row. So we get arches from three VPs.
15. At the end of the series, we will perform 1 VP and together we will make CCH at the beginning of the series.
16. Again we make a rise from 3 VP.
17. We knit a row of arches on the wrong side. RLS we knit under the arches of the previous row.
18. We finish the row in the same way as the previous one.
19. We knit a row of arches on the front side. We finish the row in the same way as the two rows previously connected.
20. We dial 3 VP for the next row.
21. In the first arch we knit CCH.
22. In the next arch and in all the rest we knit 3 CCH.
23. We close the row with the help of the SS in the third VP of the beginning of the row.
24. We knit the next row. We're picking up the rise.
25. We knit CCH at the top of the column of the previously knitted row.
26. We carry out similar work to the end of the row.
27. We recruit VP, and then 3 CCH under the first arch.
28. Until the end of the row, we make a set of 4 CCH and VP for each of the arches.
29. We connect the beginning and end of the row.
30. We get a dress 5.5 cm long.We decorate the dress with a decorative button.
And we try on the dress we knitted for the doll.
Crocheted doll dress
Crocheted doll dress
So, you can crochet a dress for a doll. The knitting process itself did not take very much time. So why buy clothes for dolls if you can knit them yourself?
P.S. And of course, a dress for a doll can not only be knitted, but also sewn. Master class “Sew a dress for a Barbie doll” can be viewed
Many of us have left since childhood and are carefully stored on the shelves of cabinets in boxes, in the walls, and on the mezzanine. The hand does not rise to throw them away, because they are our past. Looking at them, memories of distant days wake up and nostalgic feelings arise.
And you are doing the right thing by doing this, because you just need to dress up a little and you have a completely new elegant and previously unfamiliar beauty in front of you. Many girls begin to try to sew a dress for dolls from about 10 years old. Dolls in their lives during this period play a very important role. But today, alas, we will not sew dresses. If you know how to crochet, then I want to show you how to crochet a dress and hat for your dear doll.
Necessary materials:
1. Yellow yarn (100% acrylic).
2. Blended yarn (100% acrylic).
3. Hook 2.5.
Master class on knitting dresses and hats for dolls.
Types of loops: air loop, single crochet, half double crochet, double crochet, connecting loop.
Abbreviations used in the text:
V.p. - air loop;
S.b.n. - single crochet;
P.s.n. - half-column with a crochet;
S.n. - double crochet;
Connection - connecting loop.
Note. Yarn for you can take any color, but not very dense. In principle, cotton thread is also suitable. You will need a little material, just 10-20 grams of each color. So, if you still have unnecessary threads, then do not throw them away - they will always come in handy.
Completing of the work.
We collect 43 ch on the hook with a yellow thread. + 3 lifting loops. Make the chain as tight as possible. The number of loops depends on the size of your doll. By the way, such a dress can also be knitted for a small child, about 3 months old. It is only necessary to increase the number of loops. And leave the knitting pattern for dolls without changing.
We knit the next row with s.n.
We change the thread. We knit the second row of s.n. as follows: * s.n., 2 s.n. in one loop of the previous row *. We repeat from * to *. At the end of the row, we should get 64 loops.
Change the thread again and knit the 3rd row of s.n. 4 row: * s.n., s.n., 2 s.n. in one loop of the previous row *. We repeat from * to *. Number of loops =
Let's move on to knitting. So, with a yellow thread we collect 3 ch. for lifting. We knit, the so-called "shells": * 4 s.n. in one loop, skip 3 loops *. So to the end of the row.
Having knitted one row with a pattern, we form the sleeves. We count the required number of loops for the raglan and connect it to the back. I got 10 "patterned shells" on each side of the sleeve. We knit another row.
In the third row from the beginning of the pattern, increase the number of loops. We had 4 double crochets, now we make 6 each. Thanks to this addition, the dress becomes flared. We knit to the end. In total, about 7 rows are obtained. In principle, you can make it longer.
We change the thread and knit the last row of the pattern. We tie the edges and the neck with half-columns with a crochet. The dress is almost ready. We sew on buttons and whether we thread a cord from VP.
We knit a hat. We collect 5 ch on the hook. We combine them into a ring using the connection. We tie a ring 10 s.b.n. Next, we knit in a circle p.s. , making additions in every second loop. The diameter of the hat depends on the size of the doll's head. Therefore, try on the product and control its shape and size.
Having connected the required width of the bottom of the hat, we reduce the number of loops by half, knitting the next row of s.b.n. + 5 rows of ps