Shoe lacing examples. Women's and men's types of lacing. Alternative cross lacing method

16.06.2019

Laces serve not only to keep sports shoes on the feet, but also to give a creative look. Fashion trends dictate their conditions, and types of lacing multiply at a high speed.

Not only the factory appearance changes, but also their color. The combination of two colors takes the first place, thanks to this, a special look is given, which emphasizes the originality of the picture.

In 1790, an unknown inventor from England introduced the first shoe laces to the world. Then the first sneakers with rubber soles appeared.

Through the centuries, they turned into the sneakers we know. In 1924, sneakers made themselves known internationally. Zigzag lacing is the first style used on sports shoes with rubber soles.

Lan Fieggen- the first person who changed the traditional lacing, offering the world a large number of other options. European and straight, chess and sports, twisted and reverse - this is just a small part of the lacing that was invented by him. Below we consider in detail each lacing option.

Basic ways

Commonly used types of lacing:

traditional;
European;
straight;
chess;
sports;
twisted;
reverse loop;
lacing with two laces using the straight lacing technique;

For lacing, you will need the sneakers themselves and several pairs of colored laces.

A popular and traditional way of lacing sneakers. Usually it comes already as a factory option. One string is used.

Technique:

The lace is passed through the first holes at the base of the shoe.
Equalizes in length on both sides.
The ends are crossed and passed through the inside of the next holes.
The action continues to the end holes.
Next, a bow is tied.

The bow can be hidden behind the tongue of the sneaker or left on the outside.

Pros:

Does not rub the leg, the lacing is completely on the outside.
A fast and affordable option.

Minuses:

Kneads shoes.
A hackneyed uninteresting method.

This method is also called the ladder method.

Technique:

We draw the ends of the lace through the holes located near the toe of the shoe from the outside and bring it to the outside of the sneaker.
We bring one end through the next hole above.
We bring the other end crosswise through one hole.
Weaving continues in the same way until the last holes.

Pros:

Fast and convenient option.
Creative look.
Lacing reliability.

Cons: untidy look at the beginning of the shoe.

Advice! Do not use this method with large hole spacing, otherwise the look will be untidy.

The second name for straight lacing is rectangular, in which the internal diagonal weaving is not visible.

Technique:

The lace is passed through the first holes at the toe of the shoe with the ends to the inside.
The left end is pulled through the next hole on the same side and goes into the opposite hole.
The two ends are pulled out through one hole, then through the opposite side and stretched higher.
The lacing order continues until the end of the holes.
The right end goes through the last hole in the shoe.

Pros:

Aesthetic appearance
Suitable for both sneakers and basketball shoes.

Minuses:

Heavy machinery.
Models of sneakers with an even number of holes.

To weave this technique, you need two laces of different shades and a size longer than the usual standard.

Technique:

Find the middle of the lace about 2 cm away from it and cut it off.
Do the same with the second string.
Connect one short end of the first lace to the long end of the second lace.
Pull the long end up to the knot in the right hole.
Further lacing follows the principle of a straight line.

From the remaining cut laces, do the same work for the second boot.

Pros:

Modern style.
Beautiful appearance.

Minuses:

Laborious process.
Discomfort from the internal node.

Advice! The feeling of discomfort can be reduced if the knot is hidden near the little finger. So that the knot does not untie, for strength it is better to process it with special glue.

Checkered lacing

It uses two flat laces in a different color scheme to give a modern look to checkerboard sneakers.

Technique:

With one cord we weave in a straight style.
The second lace starts weaving from below, and we wave it through the first lace to the very top.
We wrap it through the upper strip of the first lace and wave it down.
Continue lacing as long as there is room.
The ends of the lace are tied inside the shoe.

Pros:

Creative look.
No knots.

Minuses:

Long version of weaving.
Sneakers do not tighten well, the upper part is especially weakened.

Advice! This lacing option is best used for loose style sneakers that do not require tying. For more tightening, this type of lacing is best used in reverse order so that the weak ends remain on the bottom of the shoe.

Often sports lacing is used on skates, as it fixes the foot well, so it is recognized as one of the strong options.

Technique:

Through the holes at the bottom, we put the lace, bringing it out.
We skip, crossing the ends under the first stretched stitch.
Next, we put the ends into the next upper holes from the inside to the outside and also make a crossing under the second stitch.
We perform this operation to the upper holes.

Pros:

Strong fixation of the foot.
Creative look.

Minuses:

Laborious process.
At first glance, it seems to be an untidy look.

Sports lacing is divided into several types depending on the sport or foot size.

Twisted lacing is of two types:

Knotted horizontal.
Knotted vertical.

These are ideal options for ski and snowboard boots, as well as roller skates.

Technique:

The ends are passed into the first holes at the toe and are brought out on both sides.
We cross the ends of the lace and tie one time on each tie.
We spread the ends in different directions and draw them through the holes and also bring them out.
We carry out the procedure to the end of the holes.

Pros:

Strong fixation of the leg.
Available technology.
Additional stretch.

Minuses: it is not possible to loosen the shoe after it is finally weaved.

Advice! It is better to level the binding strength immediately, otherwise there will be inconvenience, and you will have to completely unlace the shoes.

Reverse loop

When using this method, the pattern may be offset from the middle and therefore correct weaving is important.

Technique:

We draw the lace through the holes from the side of the toe from the inside and bring it to the upper side of the shoe.
We lift the lace on the left side up, creating a spiral pattern, while leaving small gaps.
The right end of the lace also goes all the way, only at the same time with each hole it is threaded through the loops of the left lace.

Pros: beautiful appearance (with proper weaving).

Minuses:

The lace quickly wears out due to friction.
Center offset due to incorrect weaving.

Advice! The reverse loop is best used on dark shoes with light laces, which will emphasize the pattern being created.

What are the ways of non-standard lacing?

A lot of interesting non-standard lacings are known, and butterfly lacing is more popular.

Technique:

We draw a lace through the holes located at the toe of the shoe.
We align the ends of the lace and take them inward.
We draw each lace vertically, pulling it out through the following holes. There is a small gap.
We cross from above and do the same way.
A bow is tied at the end of the cord.

Pros:

Nice appearance.
Ease of technique.
Comfort.

Minuses: non-standard look.

Advice! This look is more suitable for women's elevated sneakers. It is better to use bright colors of laces for this option.

Also non-standard options include:

What is custom lacing for?

Good question with a long-awaited answer. Everyone is ready to stand out among the gray crowd of people and non-standard lacing is one of the many reliable and proven options.

For some, non-standard lacing is needed in order to emphasize their individuality, to show their "I". Ordinary sneakers with an unusual weave get creativity and a chance for others to imitate.

U-lace

Fashion trend of U-lace laces? This is putting it mildly - this is a super fashionable trend that is gaining popularity day by day. Next-generation elastic laces let you style your regular sneaker in minutes.

The main plus of U-lace- does not require constant tying of shoelaces. The elastic composition allows you to tightly fix the leg. A bright and rich color scheme will be combined with any style of clothing. Your shoelaces (accurate translation of the brand) will forever remain in your heart.

In one package there are 6 laces measuring 6 cm. At each end of the lace there is a plastic tip, thanks to which tying bows is not required. With the help of them, the laces interlock with each other after threading them into the holes.

The American company has offered more than 9 trillion lacing options for this particular lace model.

The near future - automatic lacing system for sneakers

Automatic lacing of sneakers has been a dream of all shoe lovers since 1989. It was then that the film “Back to the Future - 2” was released, where the main character received sneakers with automatic lacing.

Power Laces tried to release something similar in 2010. On the back side was a chip that began to perform its function when pressure was applied to the sole of the shoe. That is, when a person stepped on the sole, a sensor was triggered, which produced automatic lacing.

And so, in 2015, as promised in the film, NIKE released the Nike Mag.

A mini-electric motor, an electronic control system and a battery are built into the sole. The laces are attached to the shaft, which starts its movement under the influence of the motor.

Sensors trigger the control system in response to the weight of the foot. Additional sensors regulate the degree of tightening of the laces. To "untie" them, you need to press one button, which is located on the side of the sneakers.

They work on recharging via mini-USB. The whole structure is quite weighty and therefore it does not go on mass sale. The developers hope to improve their self-lacing super shoes in the near future.

How to tie shoelaces on sneakers and boots: find your own way

With the right approach, laces can turn from an insignificant nuance into the main focus of the image. If you agree that style is all about the details, and factory lacing of boots and a bow knot is too boring, then we will be happy to tell you how to tie your shoelaces in an original way.

1 Lacing for sports shoes
2 "Spider line"
3 "From two laces"
4 "Chess"
5 Lace up shoes
6 "Direct"
7 "Butterfly"
8 "Ladder"

Lacing for sports shoes

Even the most nondescript sneakers or an old pair of sneakers can be “revived” with unbanal lacing. You will find several ways to lace up sneakers with detailed instructions below.

"Spider line"

It seems that lacing sneakers according to this scheme is quite difficult, but the principle here is exactly the same as in classic crosswise lacing, only the ends of the laces are threaded not into adjacent holes, but into the first and fourth. The scheme is simpler:

pull the string through the first holes so that both ends come out from the inside;
make sure that the lengths of the ends are the same;
cross the ends and thread them into the fourth holes;
then, without crossing the ribbons, thread them from the wrong side into the second holes;
both ends are outside, cross them again and stretch into the fifth holes;
we return back again, stretching the laces from the inside and bringing them out of the third holes;
when the ends are outside, we cross them again and thread them through the sixth holes.

As you can see, tying laces beautifully on sneakers according to this pattern is quite easy. The main thing is to understand the principle - each "cross" is located in a conditional square formed between 4 holes.

"From two laces"

Getting more complicated! Having 2 pairs of colored laces on hand, you should definitely try to tie them in this way. Take the time and patience to tighten the laces properly, especially if you will be lacing high tops. Instructions attached:

take the first lace (it is blue in the diagram), thread it into the very first hole, near the toe of the sneaker;
thread the second free end of the lace alternately into each hole, forming loops (their length can be either the same or decrease);
it is important to immediately tighten the loops of the desired size, since this lacing does not involve pulling the ends into a knot;
after the end of the first lace is threaded into the very last hole, proceed to the second lace;
similarly, we thread it into the very first hole, if desired, the ends of the laces can be tied or simply tucked inside the shoe;
then we thread the second lace (it is yellow in the diagram) into the loop formed by the first lace, and then we stretch it into the hole and so on until the very top hole.

It is not necessary to tie, let alone tighten the ends, otherwise the “pattern” will be broken. Using this pattern, you can lace up wide-top basketball or skate shoes.

"Chess"

Definitely youthful and intricate lacing for those who are looking for how fun to tie, or to be more precise - braid the laces. You will need 2 long ribbons in contrasting colors, all your accuracy and a little patience, and we have prepared a step-by-step diagram for you:

start lacing the sneakers from the bottom, threading the end of the first tape into the lowest hole;
then thread the end into the first hole from the opposite side;
bring the tape to the front side, threading its end into the second hole on the same side;
now throw the lace to the opposite side;
again from the inside, stretch it into the next hole;
according to this scheme, lace up the sneakers to the very top;
after that, take the tape of the second color, thread it into the first lower hole to hide the end;
pass the second end either above or below the first lace, moving up;
make a twist and similarly lower the second lace down;
do not forget to straighten the tape so that it lies neatly;
we rise again, wave-like passing the end of the second lace between the loops of the first;
Continue with the pattern until the end of the tape is short enough to tuck it inside the shoe.

If you are looking for a way to lace up your sneakers beautifully, while the tightness of the knot does not matter to you, be sure to try it! But keep in mind that the shoes will sit loosely on the foot, and possibly even dangle. The option is not for athletes, athletes, but for walking around the city at a calm pace - what you need!

Lace up shoes

It is unlikely that you will be able to lace up your boots in the ways described above. Therefore, we have selected the most unusual and at the same time functional lacing patterns suitable for oxfords, derbies and chuka boots. At the same time, functionality has become the main selection criterion, because you need to lace up your shoes not only beautifully. It is important that intricate intricacies can be tightened without transferring the leg and without spending more than a minute on it. For men who prefer classic shoes, lack of time is an urgent problem.

"Straight"

The most concise and neat lacing - only parallel lines are visible from the outside, and there are no diagonal intersections at all. At the same time, it is quite easy to perform. A diagram and detailed instructions will make the process even easier:

the ends are threaded into the first lower holes so that they go inside the boot;
then one end is brought out of the second hole on its side, and the second - from the third;
the laces brought out to the front side are transferred to the opposite side and threaded into a hole located at the same level;
from the inside, the ends of the tape are again inserted into the hole, passing one free one (through one hole);
on the front side, the lace is again passed into the hole located opposite, and so on to the very top of the boot.

Important: to tie a knot, the shoes must have an odd number of holes, otherwise the ends will remain inside the shoe.

This scheme can be used and, if necessary, lace up high top sneakers or any other sports shoes. The result will look neat.

"Butterfly"

A very simple method, suitable for low boots. One of the advantages of this option is the ease of pulling the ends into a knot to adjust the fullness of the shoe. The technique is as follows:

pass both ends of the lace inside the boot;
from the inside, pass the ends into adjacent holes and bring them out;
cross the ends and pass them into the following holes;
again rise from the wrong side one hole up;
bring the laces out and cross them;
thread the ends through the following holes again;
continue in the same way.

For sports shoes, this option is simple, because sneakers can be laced in more intricate ways, and classic shoes still require restraint.

"Ladder"

Despite the external simplicity, this scheme is considered quite complex. But if you have mastered the above methods of lacing sneakers, then there will definitely not be any difficulties. Step by step guide to help:

thread the ends of the tape into the lowest holes so that they come out inside the boot;
then we lace up first one end, then the second;
the first end (it is yellow in the diagram) is brought out, threading it into the hole above;
we throw it to the opposite side and pass it inside the shoe;
now we thread it into the hole on the opposite side through one;
again we throw the end to the opposite side, but now, passing it through a hole located at the same level;
we continue according to this scheme to the very top;
the second end (in the diagram it is blue) is threaded according to the same principle into the free holes, not forgetting to stretch the cord under the already existing loops.

Of course, there are a lot of ways to tie shoelaces beautifully on sneakers or boots. In our selection were the most interesting schemes, the repetition of which will not cause any particular difficulties. Well, as they say, it's better to see it once - video instructions to help!

Currently, there are many ways to lace up sneakers or sneakers.

Modern lacing is not just a way to keep shoes on the foot, but a way to express yourself or attract attention.

It is acceptable for many subcultures to wear brightly colored shoelaces and tie them in a completely non-standard way.

If you study the lacing in detail, you can be very surprised how original the types of tying bows, threading through holes, twisting among themselves.

For example, the video shows 5 of the coolest ways to tie shoelaces on sneakers.

And below are some tips on how to lace up your shoes beautifully and correctly.

Types of lacing sneakers

The original lacing will become a real decoration for your shoes, it will attract the attention of others. Sometimes an unusual way of tying your shoelaces can enhance the beauty of your sneakers or sneakers.

♦ Lacing "Zigzag"

The most popular tying method is the Zigzag. This is a common way to tie shoelaces on any shoe. It is a crossing of the rope along its entire length. Such lacing does not attract attention and is absolutely standard.

Everyone can lace up the Zigzag, even a child. For this you need:

Find the lowest rings of holes and thread the string through them so that the two ends come out from the inside out.
To the next holes, you need to cross the ends of the lace and also thread them from the inside out, you need to do this movement for each pair of holes
At the end of the holes, the two ends of the lace are tied into the simplest bow of two loops.

This traditional lacing is good because it is located on the outside of the shoe and thus does not rub the foot. However, it has a drawback - too tight knitting crushes the boot.

♦ European lacing

Another, no less popular, lacing - "European". It looks good, the main thing is that it is original and not boring, and yet it does not cause any negative emotions.
As the name implies, this method of tying shoelaces originated in Europe and is still very popular in it.

The tying method adds originality to the laces: one lace must pass through both holes at the same level

Making European lacing is not at all difficult:

The lace must be threaded from the outside inward into the lower annular holes
One side of the lace (marked in yellow in the picture) should exit through the top lacing holes
The other side (marked in blue in the picture) should go one hole higher
Alternate lacing continues until the end of the holes.

This type of lacing is quite fast and the laces tied “in a European way” look neat and stylish. And this despite the fact that at the beginning the lacing looks a little confusing.

♦ Straight lacing

If you really want to draw the attention of others to your shoes, you need to try straight lacing. This is an absolutely even, parallel arrangement of laces in the holes. There is no diagonal lacing and therefore the shoes look neat.

Be careful, such lacing should be on shoes that have an even number of holes. If you have an odd number, leave the top holes without a lace, as is done in the picture.

Try straight lacing on your shoes:

One end of the lace (indicated in blue) should be slightly shorter than the other end
One of the ends remains unlaced, and the second reaches the very top
The lace in this knitting must necessarily go into the holes from the outside to the inside.
It is not customary to tie bows in such lacing, hide the laces inside

Sometimes it is difficult to tie neatly "straight" lacing the first time, but with a few practice and you can achieve a beautiful result.
The advantage of this lacing is that it can always be loosened for free wear.

♦ sawtooth lacing

If you have never tried anything more original than "Zigzag" or "Straight Lacing", you can start practicing such an unusual method as "Sawtooth Lacing".

In the lower rings, the lace must be inserted from the outside inward
One lace (yellow in the picture) should run horizontally through all the rings
The other (blue in the picture) is threaded obliquely with the obligatory skipping of one hole
Continue this lacing until one of the ends of the lace ends.

This lacing is easy to tighten and looks very impressive. The lace, located diagonally, can be directed either to the right or to the left, or it can be completely opposite to each other.

♦ Diagonal lacing

If Sawtooth Lacing doesn't impress you, try Commodity Lacing for yourself. This is a rare and unusual way of tying shoelaces. It also has the name "Diagonal lacing".

Thread the string through the bottom holes from the outside in.
One end of the lace should be significantly shorter than the other
Pass the short end through the last hole on the opposite side.
With the second end, thread the lace through all the holes to the very top, tie

Such lacing is quite practical, because it is quickly tied, untied and cut. There is only one drawback - the different lengths of the laces at the top of the sneaker.

Lacing women's sneakers and sneakers

Of course, lacing should be universal, male and female, in order to highlight and emphasize the elegance of even the most athletic shoes. Every woman should try this method of tying shoelaces at least once.

♦ Lace "Butterfly"

The most popular and simple is the Butterfly lacing.

It is called "butterfly" because it is compared with a men's butterfly ornament. This method most effectively lengthens the laces. The secret of this lacing is very simple: the laces are crossed on the front and stretched inside.

First of all, you need to thread the laces from the outside inward and stretch them
The lace inside should be pulled up, skipping one "floor" of holes
After that, the laces are threaded and crossed on the outside.
The action is repeated from top to bottom, wearing such lacing is very comfortable

Butterfly lacing can be worn in order to relieve pressure on the leg. The lacing gives the legs enough space and freedom.

Lacing men's sneakers and sneakers

Men's lacing should be original, stylish and reflect masculinity. Modern lacing is a way of self-expression, so your mood and character can be conveyed even in such trifles as the way you tie your shoelaces.

♦ Lacing "Lightning"

One of the most popular laces for men is the Lightning lacing. Its name suggests that lacing is similar to a zipper. It is quite complex, but strong and reliable.

It is necessary to stretch the lace through the lower holes and bring it out on both sides on the sides
Both ends of the laces are tucked up to the ties at the same level and fed into the next pair of holes that are inside
The ends of the laces must be crossed, threaded under the ties of the received level and raised
These movements are repeated up to the very top.

The lacing looks very nice, it will add style and beauty to any men's shoes. Such lacing can look spectacular on moccasins, sneakers, sneakers and sports shoes.

Types and methods of lacing sneakers with 4, 5, 6, 7 holes

♦ Sneaker lacing with 4 holes

Four-hole lacing certainly limits the ability to create intricate patterns or weaves. But even in such cases, you can achieve a beautiful and elegant design of the tie of the laces.
Four holes are considered to be on one side

The most popular option is to tie the laces with a cross outwards. This style does not cause negative emotions and looks decent enough. To do this, you need to thread the lace into the lower rings from the outside, take it out from the inside, cross it and thread it into the rings again.

Even stripes of lace look more impressive on shoes with 4 holes for laces. They visually lengthen the shoe. Lacing this style is not difficult, but it looks neat and fashionable.

♦ Lacing sneakers with 5 holes

More lace holes give you more options to style your shoes. Five holes is the most common number of holes on sneakers.

Have you ever tried lacing your sneakers with one lace? Be sure that this method will raise many questions from others and attract views.

But you should not dwell on simple options, because almost everyone is able to think of such ones. Interesting and popular is the "Knot" lacing. Everyone can do it and it is perfect for shoes with five holes:

Insert the lace from the inside into the bottom holes and thread it outward, align the lace along the length
Cross the cord by wrapping one end around the other and point them again in opposite directions
Insert the lace each time from the inside and make a knot from the outside

♦ Fancy lacing sneakers with 6 holes

Lacing shoes with six holes is a real playground for creativity. You are free to create the most unusual patterns and weaves with just laces. Choose flat laces of medium thickness and then you can definitely achieve a spectacular pattern on your shoes.

There is one way of lacing, which is called "Shop Lacing". It is very similar to the nodal one, but nevertheless it is not simple and is distinguished by intricate knitting.
Such lacing is suitable for both flat moccasins and voluminous shoes, because the weight of the secret lies in how gracefully you intertwine the two ends of the laces.

The lace is threaded from the inside and out
Both ends are threaded into the upper rings from their sides, threaded from the inside and returned to the outside.
Each end is looped into the adjacent lace and pulled up again.
A similar pattern is repeated to the very top.

The pattern is quite complex and it is able to tighten shoes, but its advantage is that it can also shorten long laces. The pattern looks neat and stylish.

♦ Lacing sneakers with 7 holes

For those who want to transform shoes that have seven holes, there is a wonderful way called "For Racers". They came up with it so that long laces do not interfere, do not get tangled, and tightly tying shoes, hold them tightly on the leg.

You should skip the lace diagonally and bring it out of the upper right and lower left holes
The top lace (marked in blue) should zigzag down to the center of the shoe.
The bottom lace (marked in yellow) should zigzag up to the center of the shoe.

The lacing looks quite modest and neat, but unusual, and taking off your shoes will not be easy.

♦ Running shoe lacing

Sports shoes need a special lacing that will hold the sneakers firmly on the foot and allow the knot to untie.

Initially, you need to bring the ends of each lace through the upper and lower holes of the left row of holes.
Next, you should cross and enter these into the upper and lower holes of the right row of holes.
The end of one lace must be lifted up through one hole, and the second lace must be brought out and pulled to the left.

Laced up? Then go ahead - run to health!

How beautiful to tie bows on sneakers and sneakers

Perhaps you have never thought about the fact that there are ways to non-standard tie shoelaces into bows. Everyone is used to either making a standard loop knot or hiding the ends of the laces.
But how often have you seen a bow tied on the side? This is a new solution to make shoes cute and cute.

To knit such a pattern, you don’t need much, it’s enough just to repeat the same type of weaving on both sides.
The ends of the laces move as if in a "Greek pattern", passing through the holes inward
Some variation of the passage of the laces through the holes can be changed, for example, making them even or crosses
The bow is tied on the side, the remaining long ends of the laces are removed and hidden.

Now sneakers, sneakers, boots and many other shoes, you tie in an original and simple way!