Current design for nails with tape with video and photo. How to do a manicure with tape. Step-by-step instructions for nail design. Using liquid tape Tape manicure ideas

Attentive fashionistas have probably noticed such a fashion trend as shimmering ribbons on celebrity nails. This trend is becoming increasingly popular, penetrating the masses every day. A manicure with design tape is more variable than it might seem at first glance. All the secrets of creating original nail art: how to do it at home, the nuances of using ribbons, a selection of ideas with photos.

Variety of ribbons for nail art

Nail designs with ribbons are creative, stylish and attractive. Manicure tape is nothing more than a self-adhesive strip. It may vary in color and thickness. The ribbons have a glossy shine, thanks to which the nail art shimmers in the light and attracts attention to its owner.

Avid lovers of purchasing goods through online stores will be able to find tapes on the Internet under the names stripingtape or nailline. The cost of the accessory is negligible, so you can afford to buy many strips of all shades from the thinnest, which are most preferred, to quite wide ones.

Features of tape manicure

  • Regardless of what coating you choose (acrylic, shellac, ordinary decorative varnish), the stripes will be perfectly fixed with an adhesive layer.
  • To avoid peeling and depressions from pressing the tapes, the plates must be thoroughly dried in natural conditions or, if gel polish was made, under a lamp. The rule of retreating a millimeter from the free edge and cuticle when gluing a glossy strip is also intended to prevent the above.
  • When completing your manicure, you need to use a clear topcoat. Do not be afraid that after a layer of fixative, the tapes will lose their characteristic shine. This technique will ensure the preservation of the design for a longer period.

Ribbons take part in the creation of unique nail art in two ways. The first is to use self-adhesive strips to decorate nails; in the second, the strips play a secondary role and are subsequently removed as unnecessary.

Decorative manicure technique with tape for design

  1. The first thing required is to prepare the plates. Manicure is not only about painting nails, but also about treating them. It is necessary to remove any remaining decorative coating, if any. The most gentle remover is a liquid that does not contain acetone. Read the product label carefully before purchasing it. Look at your nails, are they the same length? Compare if necessary. Clean the plates from overgrown skin - cuticle. Among all the methods, the hardware procedure is recognized as the best - the safest, since you can be sure that you will not injure the skin or cause infections. If you do not have such a specialized apparatus, then replace the usual scissors or tweezers with a softening gel, after applying which the cuticle will become pliable for removal using an orange stick.
  2. When the nails are prepared, it’s time for the decorative coating. If you plan to use regular varnish, then do not skip the step of a base coat to level the surface. Then go over the color twice and wait for it to dry. Think about the composition in advance and cut the strips.
  3. Apply the tape to the plate and press. There is a three-stage system for gel polish. Each layer needs to be dried in turn.

Thanks to the tapes, you can hide the joints between shades, emphasizing the boundaries with color and shine.

Striped principle: how to do a manicure with ribbons

This is the second variation of the use of strips in manicure. This technique does not require tapes as such. They can be successfully replaced, for example, with tape or stencil stickers. However, the low cost of self-adhesive strips makes it possible to use them when creating striped designs. In order to make even stripes, the tapes are secured to the nails and, if necessary, removed, exposing the bottom layer of varnish. Ribbons of various lengths, colors, and thicknesses will come in handy here. There is no point in spending spectacular tones on this procedure, since the stripes play an exclusively practical role here.

Manicure ideas with ribbons

We invite you to familiarize yourself with a selection of photos of interesting nail art made using self-adhesive tapes.

A monochromatic manicure will be diluted by ribbons located vertically or perpendicularly. Metallic looks better on dark blue, and black stripes on white. You can, as described in the second method, resort to tapes as auxiliary material. For example, after covering your nails with acid yellow, apply three vertical stripes on top. Next, paint with a layer of gray varnish. Removing the ribbons will reveal the yellow coating in their place. Ideal, even stripes will visually elongate the plate, creating the illusion of length.

On initially long nails, a combination of a pair of harmonious colors, visually dividing the nail horizontally in two, looks advantageous. A favorite mix is ​​delicate blue and pink. The joint between them will be covered by a strip of silver tint. If the color closest to the edge of the nail is made predominant, it will seem that this is a kind of lunar French manicure, and if the color from the base occupies a large area, this is an analogue of a French manicure. If you want to emphasize your impeccable taste, leave the hole transparent, this will add piquancy to the design.

The trend of recent seasons is that the gradient is successfully complemented by stripes, turning into a unique new style. Using sponges, it’s easy to make ombre on plates at home. An alternative is just a few colors applied back to back (green, yellow, red). When everything is ready and thoroughly dried, apply the tapes according to your preferences. You can decorate each finger in a special way (diagonals, geometric shapes, verticals, horizontals, etc.). Now paint the surface black and wait for the coating to harden. By removing the stripes, you will discover how original the exposed multi-colored areas look.

Fantasy is inexhaustible. If you think that you have already tried all kinds of designs, you are deeply mistaken. Ribbons in manicure are an amazing accessory that exponentially increases the number of existing nail art designs. As you can see by looking at the photo, the tape technique is simple and accessible, but at the same time beautiful and interesting. Low price, rich assortment, ease of use – these are the arguments for you to decide to experiment with nail designs with ribbons.

It can be anything: classic, strict, avant-garde or extravagant. You can always choose an original coating based on your tastes and preferences. Let's take a closer look at the basic principles of creation and the best design ideas.

What it is

A manicure with stripes on nails involves the presence of diagonal or wavy lines. They can become a wonderful background in a design, separate the borders of colors or become stylish accents in the covering. In English, this accessory is called nail striping tape. The tape is essentially similar to adhesive tape, only very, very thin. The most convenient way to grab it is not with your nails, but with tweezers or tweezers.

The most common tape width is 1 mm.

Design elements How to create and apply
separatorsIf your nail design has a lot of multi-colored blocks, then it is advisable to make an edging for them at the junction of shades. Borders can be drawn using varnish and a thin brush or use manicure tape. Lovers will love this simple idea.
wavy stripesThere are never too many stripes. If you place them close to each other and make them slightly wavy, you can get a luxurious one.
zig-zagsBroken stripes with sharp corners of different shades will decorate any
vestBlue and white stripes that resemble a vest are an original solution for a classic nautical manicure.
geometryStripes on nails are an integral element of geometric manicure. They can fit tightly together, outline boundaries or create unusual shapes.
braceletsPopular bracelets on nails are an interweaving of thin multi-colored lines in the hippie style.
smiles and arcsArched smiles on the free edge of the nail or at the cuticle also have a right to exist.
quiltedThe intersection of stripes creates a kind of cell, which is the basis for or.
outsideThis is a fashion trend that came to us quite recently. Now the strips can be glued not only on nails, but also beyond them. A small line can easily be located on the plate or go beyond the boundaries of the cuticle. Geometric design goes beyond the ordinary. A manicure with a stripe in the middle of the nail looks fresh and casual.

Fashion secrets

By following our top-notch tips, you can create the most original stripe nail design:

  • Before attaching the tape to your nail, make sure the nail polish is well coated. Otherwise, there is a big risk of ruining the entire nail design.
  • The most popular shades of scotch tape are gold, silver and black.
  • Manicure on short nails with stripes and ribbons is best done in light shades.
  • The ideal place to store manicure tapes is a regular tape dispenser.
  • The composition can be enlivened by combining adhesive tapes of different widths.
  • Vertical tapes visually enlarge the nails, while horizontal tapes, on the contrary, narrow them.
  • Feel free to combine glossy and matte textures. They will give the coating a special shine.

How to make stripes on your nails

A manicure with stripes has a huge number of options for its creation. Anyone can draw straight lines. And if they don’t turn out to be quite straight, then turn the design into art and say that it’s just the artist’s unique vision.

Brush

The simplest and most common way to create stripes on nails is with a brush. It is best to use a thin brush, or at least a flat one. But the latter is more suitable for drawing and painting wide stripes. Using this simple tool, you can easily create a French manicure with stripes, while at the same time drawing a smile line on the free edge.

Ribbon

Manicure tape comes in different colors and widths. It can be found in a cosmetic store that sells nail art supplies. The cost for one adhesive tape starts from 28 rubles. The tape has an adhesive backing and is attached to a completely dried substrate.

How to use manicure tape correctly? Using scissors, you need to cut the required length, glue it to the nails and press the ends tightly against the side rollers. You can create a huge number of designs this way. The material can be glued on top of the nail plate, used to separate shapes, or even create lines using the technique.

Scotch

If your design involves stripes and dividers, try making them using regular tape or tape. These stationery products have smooth horizontal edges and are easy to detach from the nail.

Stencils

If you like to do French manicure, then you should still have special stencils. They can be arched (for the smile line) or angular. Both options are suitable for creating a manicure with stripes. Adhesive-based stencils come off easily after applying varnish.

Marker

A special marker for nail art has a very fine tip. Thanks to it, you can draw any detail in your coating. The nail art industry offers a wide selection of nail markers of different shades. They are waterproof and easy to write on colored surfaces.

Best ideas

What stripe manicure would you like to have on your nails? Will it be something strict and laconic or bright and positive? For you, we have collected the best options and ideas for striped manicure.

The simplest option

There is nothing complicated here. Each of you can repeat a similar design at home, using several available tools. After all, tape helps create perfect thin lines in seconds. All that remains is to choose the appropriate shades of varnish and the direction of the stripes.

What you will need for the design:

  • base;
  • two colored varnishes to choose from;
  • manicure tape;
  • tweezers;
  • scissors;
  1. Apply a base layer to your nails and send it to dry in the lamp.
  2. Coat the design with varnish No. 2 in two layers, and then polymerize everything in a lamp.
  3. Apply adhesive tapes in random order to the well-dried substrate.
  4. Carefully coat your nails with polish No. 1.
  5. After drying completely in the lamp, carefully remove the tapes with tongs or tweezers.
  6. Cover the design with a glossy or matte topcoat.

The same design can be done in reverse:

  1. After the base layer has dried, coat your nails with polish No. 1.
  2. Glue the tapes onto the dried layers in a chaotic manner.
  3. Using a thin brush, carefully fill the gaps between the tapes with varnish No. 2.
  4. After drying, coat the design with a finishing topcoat.

Negative Space Design

Stripes on nails can be used not only as decoration. This unusual design will not leave anyone indifferent. The main thing is to choose the right matching shades.

What you will need:

  • base;
  • colored gel polishes;
  • lint-free napkin;
  • clinser;
  • thermal film;
  • scotch tape;

How to do a manicure with stripes:

  1. Apply 2 layers of base to your nails and cure in a lamp.
  2. Remove the sticky layer with a lint-free cloth.
  3. Gently walk over your nails with a soft buff to remove excess gloss for better adhesion of materials.
  4. Apply tape to the middle of the nail.
  5. Paint one half with varnish No. 1.
  6. Apply varnish No. 2 to the other half. You can glue sliders or thermal film to the second part of the free edge as you wish.
  7. Remove the tape by pulling it parallel to the nail. The gel polish on the tape should come off along with it.
  8. Cover the design with a finishing topcoat.

A similar composition can be created using 2 or more shades.

Video instruction

Even more manicure ideas with stripes on nails can be seen in the video below.

Friendship bracelets

This unusual trend came to us from Korea. Manicures with stripes are only gaining popularity in 2018. It was brought into fashion by nail artist from Seoul, Yang Kung Park. The designs on the nails are inspired by the famous friendship bracelets.

What you will need:

  • base;
  • nude or dark gel polish;
  • colored varnishes;
  • thin brush;
  • manicure tapes of different colors;
  • voluminous charm stickers;
  • rhinestones, beads, bouillons, rivets;

How to make bracelets on nails:

  1. Apply a base coat to prepared nails.
  2. Dry everything in a lamp until completely dry.
  3. Apply beige, transparent or dark gel polish in 2 layers in a lamp.
  4. Place several strips of tape on your nails. They should overlap each other a little.
  5. Add a couple of straight lines using a thin brush and gel polishes.
  6. Apply small charm stickers in the form of rings or other shapes.
  7. Add a couple of rhinestones or broths.
  8. Cover the finished design with a finishing topcoat.

It is not necessary to lay out a similar composition on all fingers. It is enough to decorate 1-2 on both hands.

A variety of manicures with striped bracelets can be seen in the photo.

A manicure with stripes on nails is a fresh and original solution for every girl. A whole field of experimentation is open to you. You just need to follow your imagination and create new masterpieces.

When creating an original and stylish design, girls often ask how to apply tape to gel polish. There are several subtleties of this process that even beginners can cope with.

Kinds

Decorative tape for creating the perfect nail design is in demand among professional and home artists. Different in shade and thickness, it allows you to diversify your look and add originality to any gel polish coating.

  • Adhesive tape is sold in small rolls and comes in a thin strip of various metallic shades. The cost of such an accessory is low, and the range is simply huge.

Using adhesive tape you can create a laconic manicure or an intricate design with a geometric pattern. Stripes are used to emphasize the geometry of the nail plate or coating, design the color or shape of the nail.

  • Liquid tape is not an accessory for creating nail designs; such an object acts as protection for the periungual area from contact with gel polish, including base and top coat. The product is sold in a standard bottle with a brush, applied to the area around the nail using the latter using gentle movements, without entering the territory of the nail plate. The use of adhesive tape is useful at the beginning of a manicure: after processing the nail and plate and before applying the base and pigments. The tape allows you to protect the delicate area from contact with persistent gel textures and create a neat, perfect manicure with a durable coating.

When applying gel polish, you should work strictly on the nail plate or remove excess polish before drying in a lamp.

It will be difficult to get rid of the coating on the skin, and it’s easy to ruin the appearance of the manicure with such manipulation. The liquid tape absorbs the blows of awkward hand tremors and small errors of the master, which is especially typical when performing a complex design or ombre manicure. It is easy to remove the accessory after all stages of applying the gel coating, including the top coat. Simply pull the tape with tweezers - it can be easily removed without the risk of damaging the coating or skin.

Application technique

Adhesive decorative tape requires proper application in order for the design to be beautiful and practical at the same time. Let's look at the steps on how to use duct tape yourself:

  • First, you need to do a classic manicure and remove the cuticle, level the nail plate with a buff, take care of the uniform texture of the latter and “file down” vulnerable spots near the finger ridges;
  • Next, you need to apply the base coat and dry it in a lamp. Then apply the main color in 2-3 layers.

It is better to think through the design of the future manicure in advance in order to determine the number of layers of the main color of the varnish. This can be a single-color coating with a decorative tape or the use of several shades of gel polish on one plate.

  • After the gel polish has dried, you can apply the tape itself. You must first cut a small piece of the accessory along the length of the nail. It is important that the tape is not wider or longer than the nail itself, but a significantly short film will not look very good. Determine the “golden mean” or the required length of the strip in advance, and first prepare the material to create your design.
  • Carefully apply the strip to the part of the nail that it will frame. This can be done using tweezers - it is convenient and practical. You can smooth the tape with your finger.
  • Be sure to secure the tape with topcoat and dry it well in the lamp, this will allow the accessory to remain on the nail plate for a long time.

If the length of the glued tape is slightly longer than necessary, you can shorten it directly on your finger using thin nail scissors.

Trim off any excess with scissors before applying topcoat.

Decorative tape with a sticky surface allows you to create an original “striped” design on the nail plate, for which you will need to perform a number of simple steps:

  • Do a manicure, cover your nails with a base coat, dry well under a lamp;
  • Apply the base color, dry again;
  • Stick thin strips on the nail plate - they will protect the previous layer and preserve the color;
  • After the strips are glued, you can apply the next varnish in a contrasting shade. Dry your nails in the lamp and give your fingers a little rest;
  • Carefully remove strips that are no longer needed and get the result - smooth, contrasting lines that are trendy this season;
  • Be sure to apply a top coat, which will smooth out the unevenness of the nail plate and give the surface a pleasant gloss.

Auxiliary strips are used not only for a “vest” style design; they can be used to draw a French manicure or be used to divide the nail plate into two parts and use several colors on one nail.

Such techniques require attentiveness and accuracy from the master, and the ability to correct the coating manually using a toothpick and a cleaner.

You will learn more about how to glue tape in the following video.

Design ideas

Stripes allow you to create an interesting manicure without giving up your favorite gel coat color. Let's take a look at the design ideas right now:

  • Classic strips in the amount of 1, 2, 3 pieces can be placed horizontally or vertically on the nail plate and get a laconic design. It is better to use contrasting colors of ribbons.
  • "Cell"- an alternative to simple stripes. To create it, stick two horizontal thin stripes at the top of the nail and two perpendicularly, focusing on the right or left side of the plate.
  • Unusual French. This technique allows you to diversify a strict design and add a “zest” to it not only with the geometric shape of the holes, but also with their design. Choose any nude shade of gel polish and apply it in 2 layers, dry in a lamp. Using a regular or thin brush, draw rectangular holes on the tip of the nail in two layers for a rich color. After the coating has dried in the lamp, cut the strips according to the desired length and glue them to the border between the base color and the holes.
  • The original design with geometric shapes will appeal to everyone: choose the main shade of gel polish and cover your nails with them. For example, you can apply 3 different shades to your index and ring fingers and separate them with ribbons. You can draw rectangles, squares or triangles and highlight them with tape to hide imperfections.
  • Stripes in manicure design are a current trend that can be easily created at home.. In this case, decorative ribbons will become auxiliary and help separate one color from another. They can also appear as those same stripes with a pleasant shine.

Master Class

You can make a striped manicure yourself. We will tell you step by step about this interesting technique:

  • Select the main tone of the gel polish and cover the nail plate with it in two layers, dry each of them in turn in a UV lamp.
  • After the layers have dried, take the prepared cut strips and stick them on the nail plate, keeping the same distance between them.
  • Apply the second shade of gel polish on top, dry the layers under the lamp.
  • Then remove the tapes with gentle movements (you can use tweezers).
  • Don't forget to secure the design with a top coat and seal the tips of the nail plate well. The top coat will smooth the surface of the nail and strengthen the manicure, give it a glossy shine and protect it from chips, cracks and scratches.

Striped manicure usually combines light and dark shades.

The main color is traditionally taken to be a white or nude shade with a rich texture. It is better to apply light colors first, and bright stripes second.

Decorative tapes are quite capricious by nature, and even with strict adherence to the instructions, sometimes it is not possible to cope with them.

  • If you are not sure that you can determine the required length of tape by eye, cut it a little larger, stick it on the nail and remove the excess accessory using nail scissors. The corners can be smoothed with an orange stick.
  • To create a “striped” manicure, take long pieces of ribbon: this will allow you to stick them evenly, maintain the required distance and easily remove them from the nail plate.
  • To diversify the black gel polish, stick light metallic or gold accessories onto the coating. They will not allow the dark color to be harsh and will add an interesting accent to the manicure design.
  • An orange stick will help you carefully apply the tape: smooth the surface of the accessory with it.
  • The tone is applied only after gluing the tape.

Options for covering with decorative tape

The “new” lunar manicure with decorative tape will sparkle with different colors. Cover the nail plate with a transparent base and dry it in a lamp. Arrange the pieces of tape to form a triangular hole (you can choose a simple rectangular design). Then apply a base color, such as blue or lavender. After drying and applying the second layer (it also needs to be dried in a lamp), remove the tape from the nail plate - in this case it served as an auxiliary element. You can stick on a fresh strip to decorate the nail plate and create a contrasting transition from hole to color.

Today there are a huge number of different types of manicure: plain coating, French, ombre, moon manicure, stamping and much more. Each of these types can be complemented with various decorative elements: sparkles, rhinestones, acrylic painting. No less common is nail tape, which is used to add brightness and elegance to a manicure. In this article we will tell you how to use this tape, examples of application and little secrets that will make your tape manicure perfect.

All about nail design tape

The tape is a self-adhesive strip made in various colors. It is very easy to use and very inexpensive, which gives you the opportunity to purchase several sets at once for future designs. The tapes come in different widths, we recommend that you choose the thinnest one as it is best suited for the job. The most common colors are gold and silver, but you can choose according to your taste: from classic black or white to all kinds of multi-colored ribbons.

Moreover, the advantage of using such an element is that you can use it to create straight lines on your nails. The ribbon will not only serve as a colorful decoration for you, but will also help if you are a beginner and still have little use of a painting brush.

There are certain rules that must be followed in order for your tape manicure to last as long as possible:

  • The tape is very adhesive, so it can be used together with any coating: regular manicure polish, gel, gel polish or acrylic. However, it is important to remember that it can only be glued to dry, lamp-cured nails.
  • In order for the tape to adhere well to the nail plate, it must not be glued completely, leaving the edges free.
  • After fixing the tape on the nail, you should lightly walk over it with a special stick so that no air remains.
  • We recommend applying the top coat twice so that the tape adheres better to the nails and is protected from various damages.

How to make nail designs with ribbon

To work with tapes, you need a set of tools that are used to create a regular manicure. The only difference will be the need to purchase the tape itself and nail scissors if for some reason you don’t have them on hand.

  1. Start with a trim manicure, which will help your nails look well-groomed and neat, regardless of the design. Remove the old manicure, if you have one, remove the cuticle, set your nails to the desired length and use a nail file to correct the shape. Next, you need to degrease your nails and remove any remaining dirt and dust from them.
  2. Apply a base coat that will provide better adhesion of the gel polish to the nail plate. Dry each finger in a lamp.
  3. Apply base coat. This design can be combined with absolutely any product: regular manicure polish, gel, gel polish or acrylic. Don't forget to dry your painted nails.
  4. Work with the tape begins. Select the strip you need, cut the desired length and carefully stick it on the nail in accordance with the intended pattern. Check the size of the tape; if it protrudes beyond the edges, carefully shorten it to the required size. Remember to retreat from the edge of the nail.
  5. Apply top coat to secure the position of the tape. If necessary, do this twice, so the reliability of the manicure will be higher.


Design examples

Once you have learned how to work with design tape yourself, we suggest that you familiarize yourself with examples of similar work so that you can gain inspiration for your own ideas.

  • A solid black finish can go very well with a silver or gold ribbon.
  • To the ribbons, you can add rhinestones or sparkles already loved by fashionistas, which can either follow the contours of the ribbon or be located on adjacent fingers.
  • You can play on asymmetry by gluing the tapes at different angles. This will draw attention to your manicure and will look very impressive.

  • Try using two different tones on one nail and separating them with tape. This design will have a smooth transition, which will allow the selected colors to blend organically.
  • You can use the strips to create specific lines on your nail. The technology is the same, only after gluing the tape it must be carefully removed. A thin, even strip will appear in this place, which can be difficult for beginners to paint with a brush.

If you follow all the rules for working with design tape, your manicure will turn out to be very original and durable. Surprise your friends and acquaintances with unusual designs and improve in this direction.

Video on the topic of the article

Modern fashion trends change with each new season. This year, too, nail designs with ribbon are in fashion, which can add luxury, aristocratic restraint and grace to your manicure.

You can purchase such manicure tapes in almost any store that sells beauty and personal care products.

Sticky tape, similar to scotch tape, comes in a variety of sizes, but the most popular are very thin, literally 1.5 mm tapes of different colors.

It is these dimensions of the ribbon that make the manicure aristocratic and give it originality, aesthetics and sophistication. If previously rhinestones were used for a stylish effect, today ribbons are in fashion.

On one side, the ribbon is something sparkling, bright decoration, rich in color, but the second side is treated with a sticky compound, which glues the ribbon to the surface of the nails. At the same time, you can have short or long nails, and you will still get a creative and fashionable manicure.

Gluing such a ribbon is not difficult: just cut the required size pieces from the roll and carefully glue them to the surface of the nail plate.

The classic version of the French manicure, with a white stripe at the top of the nail, was done at home by everyone and many simply painted the stripes with nail polish. Remember how much work you had to do to make this strip even and neat if you did not use special kits for French french.

And in the case of adhesive tapes, you always get a beautiful and stylish, very original manicure.

You can use the tape to create a wide variety of manicures.. The main thing is to choose the right harmonious color scheme of the varnish coating itself and the color of the tape.

The range of ribbon color choices is very diverse and there are options for every taste.: fashionable metallic and gold, modest pastel colors, bright and rich saturated shades of all kinds of colors.

With the help of such adhesive tapes, you can create everyday manicure options, business and evening, with one or more stripes, diamonds and other shapes that can be created using stripes.

For example, a striped manicure looks very original and bright. For it, you just need to apply nail polish, wait until it dries and stick several strips of tape. At the same time, we note that you can use any type of decorative varnish as a base; the tapes adhere perfectly and do not fall off. Any nail design with gel polish (shellac), matte options with a ribbon looks elegant and stylish. The main thing is that your stripe is even, matches the color of the varnish or creates contrast.

Nail design tape: how to use

Step 1
In order to get a neat manicure, you should first do the manicure itself: get rid of the cuticles, trim your nails and give the nail plate the desired shape using a nail file.

Step 2
After these procedures, apply any decorative varnish (gel, regular, acrylic, etc.). Be sure to wait until the varnish coating is completely dry so that the tape adheres firmly and the varnish is not damaged.

Step 3
After the varnish has dried, cut the required length of the ribbon and peel it off the base. You should hold the tape by the tip so that as little grease as possible gets on it, which damages the adhesive composition and the tape may not stick so firmly to the nails.

Step 4
The tape should be attached close to the perimeter of the nail in order to obtain a complete and harmonious effect. But you should not allow the nail design tape to be higher than the edge of the nail plate, this will damage it and it will quickly come off.

Step 5
After you have carefully attached everything, you should apply a layer of fixing varnish to protect the ribbon and the resulting pattern, and glue it even stronger.

If you are creating a multi-color palette from different varnishes, the tape is glued only after you have applied all the shades of varnish and waited for them to dry completely. For those who do not know about the use of such material as tape for nail design, how to use it can be read in the recommendations given by the manicurist.

When working with gel or acrylic manicure, the tapes are glued before applying the final coat of varnish to the nails.

Adhesive tapes were invented by stylists in order to create unique accents on nails with different decorative coatings. But today they create the most stylish and original designs, without which your arsenal of “beauty” would be incomplete.

You can attach ribbons in the form of strips over the entire nail or glue one strip, which will add originality and grace to the manicure.

French manicure is a classic option, now you can do it very quickly and, most importantly, carefully. All you need is to apply a basic pastel-colored decorative varnish and wait for it to dry completely. After this, carefully attach the tape along the edge of the nail plate, so that the tape does not extend beyond it. Now you can secure everything with a protective transparent varnish.

For this type of manicure, you can choose the classic version of a white or beige, delicate pink ribbon, or use gold, silver and other ribbon options.

This season, a variety of geometric patterns and ornaments are at the height of fashion. which you can do simply and easily using strips. In this option, cut the ribbons very carefully so that they exactly match each other and do not go beyond the patterns you have come up with. Chaotic geometric confusion looks creative, and symmetry with multi-colored ribbons also looks stylish. Nail design tape can be of very different thicknesses, the main thing is not to overdo it with such an accent, and if you do not know how to use different schemes for attaching strips, it is better to look at examples of work from famous stylists.

Ribbons are also used in frappe manicure, and this original nail design can last for 2 weeks.

The most common mistakes when working with tapes are carelessness and not completely dry nail polish.

If this is your first time doing this type of manicure, you shouldn’t come up with something very multi-layered and geometric. Try working with one strip, with which you can determine the required dimensions of the tape for yourself, learn how to properly glue the decor so that it does not extend beyond the nail plate.

You should also be careful that the adhesive tape for nails does not form wrinkles and folds on the nail plate, which create a sloppy effect and the entire design does not look very beautiful and the quality of the work suffers.

With any multi-color manicure and when using various accessories, there should always be a sense of proportion and taste. Only in this case will you be able to show off a fashionable and stylish nail design that complements and completes your style and image.

When choosing a tape, consider the shape and length of your nails. If you have almond-shaped nails, you can use tapes of different thicknesses. But thin adhesive nail tape is an ideal option for square and rounded nail plate shapes.

The thickest ribbons that create a metallic shine are a separate accessory that can be used as the most important accent in manicure design.

You can buy adhesive tapes for nails in specialized stores, where they offer all care products and various accessories, decorations, etc.

The cost of manicure tape is quite low, and the price per roll starts from 50 rubles. Therefore, you can buy yourself a whole arsenal of such accessories and create the most stylish and beautiful nail designs.