Knitting slippers on a felt basis. Knitted slippers with felt soles: photo and work technique
Many people prefer to wear home slippers - flip flops, without heels, they are convenient to put on and take off with one movement of the foot. To crochet slippers- flip flops will require a sole or an insole that holds its shape well, you can use dense felt insoles with a sewn-on lining at the bottom.
To knit slippers, take 50 grams of acrylic yarn in two contrasting colors, a dark tone for knitting the insole, and a light color for knitting the upper part of the slippers.
First you need to link upper part of the insole and connect it to the felt sole. To knit the insole, cast on a chain of air loops with a length equal to the length of the insole minus its width.
Tie the initial chain in a circle, making art. b / n along the narrow part of the foot, and to expand the foot, knit 3 half-columns, on the wide part, knit st. s / n. Closer to the fingers, on the last 6 loops of the chain, knit 3 half-columns, 2 tbsp. b / n, from the final loop of the initial chain for rounding, knit 5 tbsp. b/n. On the underside of the initial chain, knit stitches in reverse order.
Knit the second row of the footprint in the same way as the first, increasing the height of the columns in the wide part of the foot. To round the footprint at the fingers and heels, add evenly 3 tbsp. b / n, knitting at three points from one loop of 2 tbsp. b/n.
The bonded insole should be the same size as the felt sole.
Felt sole tie around the edge next to st. b/n. To do this, pierce the sole with a thick gypsy needle or awl at a distance of 5 mm from the edge. Insert a hook into the holes formed, grab the working thread and pull the loop to the edge of the sole, knit st. b/n. In places of rounding, make two or three columns from one hole.
Do not break the thread and knit a row of st. b / n to connect the felt sole and the associated insole, for this knit st. b / n along the edge, introducing the hook simultaneously into the half-loops of the insole and the strapping of the sole. When finished, secure, cut the thread.
For knit top slipper if you have a thin acrylic thread, make it in two additions. Attach the thread to the corner of the sole at the thumb, knit a short row of st. b/n. To knit the next row, instead of the instep air loop, make a connecting column along the row of the sole.
Turn work and * knit the next row of st. b / n back, starting from the second loop from the hook. At the end of the row, make st. b / n from the side of the sole and a connecting column instead of an air lifting loop for the next row. *
Turn the work and repeat from * to *, in each row one column is added to expand and lift the foot.
To decorate slippers, tie a chamomile flower with lush thin petals of yarn in a contrasting color.
For the center of the flower, tie a bump. Dial a chain of 5 air sts, close it in a ring, knit st. b / n in a spiral, always inserting the hook into the center of the ring, until a voluminous bump is formed.
Once I stumbled on the Internet for beautiful crocheted slippers. I was interested in an openwork pattern called "crocodile skin" or "fish scales", as I later learned. There were no diagrams or instructions for these homemade flip flops. I took advantage of the idea and also knitted house slippers with a crocodile skin pattern.
Especially for knitting flip flops, I bought leather insoles, which already have holes around the entire perimeter. The holes are at a distance of 1 cm from each other and from the edge. I also need a hook No. 2 / 2.5 and yarn in two colors: lilac and yellow.
Let's get down to the details of the job:
1) I'll start by tying the insoles. In each hole of the workpiece, I make 2 single crochets.
2) Soles for slippers are ready. Despite the fact that the holes are made unevenly, the strapping is quite neat.
3) The top of the home slips will be made with a crocodile skin pattern. In the photo you see the standard pattern of this knitting. However, I will change it a bit. Firstly, you will have to knit not with a solid fabric, but with a triangle. Secondly, I decided to sharpen the ends of the scales - for beauty.
4) I dial 12 + 1 air loops.
5) I insert the hook into the seventh loop of the chain, I make 1 double crochet, 1 air loop, 1 more double crochet in the same loop with the first and complete the row with a half single crochet in the last loop of the chain. We turn the resulting workpiece over so that its left edge is at the top, as shown in the photo.
6) I make 5 double crochets for the top double crochet, as in the photo. There can be more columns: 6 or 7. It all depends on the thickness of the thread and your wishes. One side of the scale is ready. I make 2 air loops and a half-column without a crochet in the second loop from the hook. It turned out to be a peak.
7) Now you need to knit 5 double crochets for the second double crochet. Turning the product inside out, I make a half-column without a crochet to the beginning of the chain.
8) Here is the first scale. The second row is performed as follows: 6 + 1 air loops, 1 double crochet in the right edge of the scale, 1 air loop, 1 double crochet in the same loop as the first column, 1 air loop, 1 double crochet in the middle of the scale , 1 air loop, 1 double crochet in the left edge of the scale, 1 air loop, 1 double crochet in the same loop as the previous one.
9) Similarly, I knit the scales of the second row - for double crochets, knitted in one loop. And in each single double crochet, I make a half single crochet.
10) I think that the principle is clear to you. The third row is performed similarly to the previous one, only there will be three scales.
11) Here is such a wonderful scaly triangle I got. This is the top of the slippers.
12) Pay attention to how the pattern looks from the inside. Chains of air loops formed along the edge of the left side. Similar chains must be made along the right edge. They will be needed to connect the pattern with slippers.
13) I return to the sole. I start knitting the top of the slipper with single crochets. It is important to knit them for the strapping posts, as in the photo.
14) I do the first row - 6 single crochet at the very top of the insole. At the end of each row, you need to knit 2 connecting posts without a crochet for tying. Then I turn the work and knit the next row.
15) After completing 5 rows - a slipper nose, you need to proceed to knitting the sidewalls. To do this, I perform single crochets in a large semicircle, reaching to the middle of the insole. I do not forget that the loops are knitted for the strapping posts. When there are 2 rows from the inside of the foot, and 4 from the outside, you can start attaching the scales.
16) As I wrote earlier, the connection is made for the air chains along the edges of the triangle, using single crochets.
17) Having fully attached the part with the pattern, I knit the top of the slipper with lilac single crochets. Please note that the strapping is done in a semicircle from the middle of the insole.
Crocheted slippers are best done on the sole or insole. The insole can be felt, leather, fur. You can cut the soles from the tops of old boots.
Home slippers are crocheted from separate 6-coal motifs. It is advisable to take the insole one size larger. If it is uncomfortable with a simple insole, buy an orthopedic one.
For work you will need:
- Cotton yarn type "Violet" - 150 grams.
- Hook 3 mm.
- Insoles.
- Scissors.
- Awl or thick needle.
The yarn must be connected in two threads, and if the yarn is thin - in three. The knitting should be tight so that the slippers keep their shape and are comfortable. First, we tie the insoles, which we first pierce with an awl, departing from the edge of 0.5 cm. The distance between the holes is 0.5 cm.
When tying, we use single crochets, two in each hole. Then you need to measure the length of the tied insole around the perimeter in order to further calculate the length of the motif.
A prerequisite is that the length of the side of the motif, multiplied by 8, must be equal to the length of the insole along the perimeter (if necessary, you can change the pattern by removing or adding rows in it).
Collecting slippers. To do this, we take three ready-made motifs and sew them according to the following scheme: we sew the sides marked with the number 1 with one front seam. We sew the sides marked with the number 2, getting the back seam. The sides under the number 3 will be sewn to the insole in the future. The sides marked with the number 4 are left unsewn.
You can crochet the motifs from the outside, or use a needle and sew them from the inside - whichever is more convenient for you.
It should work like this:
Chop off the details together with the insole with pins or bast by moving the spout to the right or left of the central part. This will turn out the right and left slippers. We tie our slippers to the insole. We got comfortable slippers.
For these colorful slippers, it is better to take a felt sole. Optionally, it can be replaced with cut out leatherette or fur.
For work you will need:
- Yarn-wool or wool with acrylic - 150 grams.
- Hook 3.5 mm.
- Felt insoles.
We start knitting with a sock. The pattern can be anything, the main thing is that it is convenient for adding. We knit with a pattern of double crochets. We make additions to the little finger, that is, 4-5 cm.
At the level of the rise, we pass to the sidewalls and begin to knit in this way.
This is how the canvas turns out. It looks like the letter P. The length is determined by applying to the foot or insole.
Here is a knitting pattern for the beginning of a sneaker.
Sew the back seam. We do this without breaking the thread, from bottom to top with single crochets.
We continue to knit in a circle. The height of the slipper depends on your desire.
We attach the top to the sole, fasten it with pins, so that it is more convenient to sew on.
Sew the top to the sole with a seam "over the edge". It is better to take a stronger thread.
These comfortable warm slippers are suitable for both children and adults. This model has a knitted and leather sole. To work, you need wool yarn (you can have leftovers) and a small hook. The scheme is given for 37-38 foot size. If you need a different size - add or decrease the number of air loops. We collect 22 air loops and knit a trace according to the scheme:
For one slipper, we need two knitted footprints. Below is a trail for children's slippers, for them to dial 18 air loops (given for comparison).
To begin with, we take one trace and begin to knit slippers from a series of concave embossed columns.
Here's what should happen.
View from the back.
We begin to make reductions from the third row.
We do the reductions as follows: 3rd, 4th, 6th and 8th rows - decreases on the central five columns. We knit the 1st, 3rd and 5th convex columns together, as unfinished, skip the 2nd and 4th.
5th and 7th rows - on the central nine columns we make decreases, knitting the 1st, 3rd, 5th, 7th and 9th convex columns together, like unfinished columns. 2nd, 4th, 6th and 8th skip.
We knit the second slipper, like the first.
From a piece of leather we cut out the sole, a little less than a trace. We sew the sole on the machine. If you don't have a machine, you can do it manually.
We attach the blank to the slipper and sew.
We knit crochet cozy indoor slippers-boots.
Slippers are knitted crochet from individual 6-coal motifs, the insole is purchased.
For work we need: yarn and hook, insoles, scissors, (needle).
I recommend choosing thicker yarn, and the hook for it is a little thinner than indicated on the package, so that it turns out to be quite dense knitting and the slippers held their shape.
Purchased insoles (one size larger than your foot size) - I recommend taking medium hardness, such that they can be pierced with an awl without much effort.
1. First, I tie the insoles, which I previously pierced with an awl, stepping back from the edge of 0.5 cm and the distance between the holes also made 0.5 cm.
When tying, I used single crochets, 2 in each hole.
Then you need to measure the length of the tied insole around the perimeter in order to further calculate the length of the side of the motif.
2. Next we knit 6 motives crochet(3 motifs for each slipper). It is also necessary that the length of the side of the motif, multiplied by 8, equals the length of the insole along the perimeter (if necessary, you can adjust the pattern by removing or adding rows in it).
3. We collect slippers. To do this, take 3 ready-made motives and sew them according to the following scheme: the sides marked with the number 1 are sewn with one seam. The sides marked with 2 are sewn together to form a back seam. The sides under the number 3 will be sewn to the insole in the future. The sides marked with 4 are not sewn together.
4. We tie the entire design of motifs to the insole, slightly shifting the corner of the nose to the right or left of the center (to get the right and left slippers). If necessary, the details can be pre-chopped with pins or basted.
We put on, we wear, we rejoice! :)
Indoor slippers can safely be called the most sought-after and popular type of footwear. Indeed, when we come home after work, we first of all change our everyday shoes for home shoes. Putting on our feet such dear and beloved slippers, we immediately plunge into the feeling of peace and relaxation.On the market or in the store today there is a huge selection of different shoes for the home. But a truly feeling of warmth and comfort can only be conveyed by handmade crocheted slippers.
Our article today will be accompanied by diagrams. Using them, in a few hours you can knit original and unique indoor shoes.
Master class for beginners in crocheting slippers
If you have only recently picked up a hook and thread for the first time, if you have just learned to knit the basic types of loops, then this step-by-step master class is for you. Look at the photo below - you can also knit such beauty! But first, we advise you to repeat the basics of knitting using the article
While knitting, carefully read the description and focus on the diagram shown in the next photo.
Scheme:
The sequence of work in stages
Slipper size - 38.
Bottom part
Link a chain of 33 ch. + 1 v.p. lift.
1 circle. 31 art. b / n., 4 tbsp. b/n. in the last air loop (sock), 31 tbsp. b / n., 4 tbsp. b/n. in the last loop (heel)
2 circle. 15 art. b / n., 3 semist. s / n., 13 tbsp. s / n., 2 tbsp. s / n. in one loop * 4 times (sock 8 tbsp. s / n.), 13 tbsp. s / n., 3 half. s / n., 15 tbsp. b / n., 2 tbsp. b/n. in one loop * 4 times (heel 8 st. b / n.).
3 circle. 15 art. b / n., 3 semist. s / n., 13 tbsp. s / n., 2 tbsp. s / n. in 1 loop * 8 times (sock 16 st. s / n.), 13 st. s / n., 3 half-st. s / n., 15 tbsp. b / n., 2 tbsp. b/n. in 1 loop * 8 times (heel 16 st. b / n.)
4 circle. Art. b/n. replace with half s / n.
18 half-hour s / n., 13 tbsp. s / n., (2 tbsp. s / n. in 1 p., 1 tbsp. s / n.) * 8 times (sock 24 tbsp. s / n.), 13 tbsp. s / n., 18 half a century. s / n., 16 half-st. s / n. (heel).
5 circle. 31 polst. s / n., 24 half-st. s / n. (sock) 31 half. s / n., 8 half a century. s / n. (half heel).
6 circle. 103 art. b/n.
Top part
1 row. Start knitting from the middle of the heel, purl embossed st. b / n., a row to knit freely, so as not to pull the sole.
2 row. 103 art. b/n.
3 row. 25 art. b / n., 3 semist. s / n., 47 st. s / n., 3 half-st. s / n., 25 tbsp. b\n.
4 row. 25 art. b / n., 3 semist. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 15 times, 1 tbsp. s / n., 3 half-st. s / n., 25 tbsp. b/n.
5 row. 25 art. b / n., 3 semist. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 10 times, 1 tbsp. s / n., 3 half-st. s / n., 25 tbsp. b/n.
6 row. 25 art. b / n., 3 semist. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 7 times, 3 half-st. s / n., 25 tbsp. b/n.
7 row. 25 art. b / n., 3 semist. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 5 times, 3 half-st. s / n., 25 tbsp. b/n.
8 row. 25 art. b / n., 3 semist. s / n., 1 tbsp. s / n., (2 tbsp. s / n. with one top, 1 tbsp. s / n.) * 3 times, 3 half-st. s / n., 25 tbsp. b/n.
9 row and subsequent knit st. b/n. to the desired height. Reduce evenly if necessary.
Tie the edge of the sole and the last row with a “crustacean step”, tie flowers or bows for decoration.
Warm and cozy crocheted slippers with patterns and descriptions are ready. Let your legs be happy.
Be sure to watch the tutorial video:
You can also knit if you prefer this type of needlework.
We create cozy do-it-yourself apochki from squares
Crocheted square slippers will keep your feet warm on cold winter evenings. This type of knitted home shoes is distinguished by the originality of the model and simplicity in execution.
Step-by-step MK with a description of the work
We need the remains of threads of medium thickness, different in color, hook No. 2.5.
Knitting density: square 8.5 X 8.5 cm.
Top of the product. We knit 4 multi-colored squares according to the pattern shown in the next photo.
For the sole we knit 2 plain squares. It is desirable to add a nylon thread to the main threads so that the sole does not rub. The thread thickens, so knit these squares from 4 rows. Knitting the 4th row of the second square, connect it with the first by making a connection. column one of the corners.
The assembly of parts takes place according to this scheme.
Put the colored square (3) on the square of the sole (1) inside out to each other and tie on both sides of Art. b/n. Insert the colored square (4) into the corner formed by the sides of the squares 1 and 2 of the sole, tie them on one side. Put the last colored square (6) on the square of the sole (2) wrong side together and tie them on both sides, forming the back of the slipper. Next, tie together the free sides of squares 2 and 4, 1 and 5. Fasten the knitting, cut the thread. Unscrew the free halves of squares 4 and 5 to the toe and tie in pairs the sides of squares 3 and 5, 3 and 4 tbsp. b/n. Arrange all the connections of the squares and the free sides with a “step step” harness and that’s it - crocheted crocheted slippers from the squares are already asking for your legs.
Beautiful handmade footprints using knitting needles
Footprints are knitted slippers with soft soles, you can knit them and crochet them. This type of home shoes is more like a low toe. If you make them from warm, but at the same time light yarn (cashmere or mohair), then you can put them on boots, your feet will be very warm in cold weather.
The photo shows a variant of simple crocheted footprints. It only takes a couple of hours of your time to make them.
Master class on the implementation of such a model
For knitting, you will need yarn of medium thickness, hook number 3.Start knitting with a toe, which is knitted in the form of a circle pattern.
Starting from the 4th row, continue knitting without increments. Each row ends with a connecting column with the first loop of the row. Knit without increments of 10 rows. It turns out "glass".
Sole. Continue knitting in straight and reverse rows.
15 row. 3 vp lifting, 21 tbsp. s / n., 3 v.p. lift. Turn the product over and knit in the opposite direction in each loop for 1 tbsp. s / n. Thus, knit 7 rows. Turn the product inside out and fold in half. Knit a row of columns, connecting the two halves. It turns out a seam on the heel. We cut the thread, turn the trace on the front side and tie it with 2 circles of art. b/n. Decorate with snowflakes or flowers of your choice.
These cute little footprints, knitted by your hands, can be a wonderful gift for relatives and friends. See the video for more details.
Mastering d children's cute little slippers with their own hands
Every mother knows how hard it is to teach a baby to wear indoor shoes. No matter how many pairs of slippers a child has, he loses them and ends up running barefoot anyway. But we can say with confidence that beautiful slippers, knitted with the handles of a beloved mother, will become a favorite for the baby. He will wear them with great pleasure and pride. Therefore, dear mothers of babies, arm yourself with crochet and thread, carefully study our master class on making children's slippers and start creating. The description and knitting pattern proposed in this section of the article will come to your aid.
In the photo above you see the original children's indoor shoes for girls. This model is quite suitable for boys, you just need to change the jewelry to a more masculine one.
Work sequence
For knitting, you will need yarn - 60 g, hook No. 2.5.
Sole. With a dark thread, knit ch 23. Tie a chain on both sides of Art. s / n. according to scheme No. 1, which is shown in the next photo.
To round the edges, add 6 tbsp. s / n. from each side. Until the third row, we knit according to scheme No. 1, we break the thread. Continue knitting with a light thread. Knit the fourth row towards the heel, tying the entire foot, loop into the loop, (it should turn out 57 st. s / n.). Knit the fifth and sixth rows with a dark thread according to scheme No. 2, making decreases on the toe in the sixth row.
Knit the seventh row with a white thread, making decreases according to scheme No. 2. On the eighth row, change the color of the yarn and knit according to scheme No. 2, making decreases on the toe and heel. We tie the top of Art. b/n. We cut off the thread. We knit the second slippers in the same way. Everything - crocheted baby slippers are crocheted and waiting for decoration.
Tie such slippers to your child and be sure that he will never forget about them and never lose them. And your efforts, warmth and love invested in the work will protect and warm the baby's legs.
Video tutorials for beginners
How to correctly calculate the number of loops, choose yarn and hook, which model of slippers to choose? All these questions can be answered by watching the tutorial video. Here the whole knitting process is shown step by step, the whole technology is explained in detail. Even the most inexperienced knitter, relying on video tutorials, can easily cope with this task.
Ballet slippers:
Home slippers deserve to look original and unique. After all, they not only warm your leg, but also decorate it. Inspiration to you in creativity, dear knitters!
Slippers-boots:
And improving your skills, you will soon be able to knit not only for the home, but also for going out.