Do-it-yourself work gloves pattern. Fleece mittens: pattern. How to sew mittens with your own hands

09.09.2019

First you need to check the quality of the fur, otherwise the work will be spoiled. A fur coat or hat must be ripped open. If you use a hat, then you need to remove the glue from the skin, which is used to shape the hat, and after that, the skin slightly wetted from the skin side must be stretched on a wooden surface. When our fur is prepared, we can begin direct work.

Instruction

1. Find a suitable pattern and fit it for yourself, to do this, draw a sketch of your hand. It is most convenient to do this on tracing paper, but plain paper or a piece of wallpaper, at least A3 in size, will do.

We need 3 parts. Remember that the details must be absolutely symmetrical.

2. Spread the fur on the surface of the table with the smooth side up. Transfer the pattern to the inside of the fur. This can be done with chalk, pencil, or a bar of soap. Pay close attention to the direction of the pile, because your mittens should be exactly the same.

3. Carefully cut out your pieces with sharp scissors. It is best to do this with the ends of the scissors.

4. At this stage, you can make a lining for the mittens to make them look more aesthetically pleasing. To do this, you need to cut out details from the same fur, fur with a shorter pile or from fabric using the same pattern. When choosing a fabric, keep in mind that it should be pleasant to the touch. Sew the lining on the machine or by hand, folding the two parts right side inward.

5. When the parts are completely ready, we proceed to the most important thing - assembly. To do this, attach the two parts to each other with the fur inside. Secure them with pins so that they do not move relative to each other. Sew along the edges by hand with a buttonhole stitch, also use a seam over the edge. The stitches may not be perfect, but neatness and precision are important.

It is desirable to place the stitches as close to each other as possible. Now that the main parts are connected, sew the lining with a blind seam. We turn it on the front side and our mittens are ready.

How to decorate fur mittens

These mittens are beautiful on their own. But small details will add more uniqueness to this part of our wardrobe.

Sewing fur details on the front side. So you will betray the volume of your work.
Complemented with various special accessories in the form of animals, snowflakes and other things, rhinestones, beads. It's a matter of taste.
Accessories will help complete your look. From the same fur we can make headphones, snood, jewelry for a handbag, a phone case, everything that your imagination is enough for.

Sewing mittens from various pieces of fur

Mink tails, fur of different textures and colors are suitable for this.
Prepare the pattern. Cut your template into pieces that you would like to see your product.
Transfer the patterns to the wrong side of the fur. Here you can show your creativity by choosing the details the way you want. But do not forget about the direction of the pile and symmetry. After transferring the main template, make allowances.
Cut out the pieces along the outer line.
Carefully sew the pieces by hand with a buttonhole stitch, also use an over-hem stitch exactly along the lines of the pattern. You should get 3 parts.
Further, the process is no different from sewing mittens from a whole piece of fur.

There is a lot of work in the village and in the winter in the yard - water, firewood to bring, and sometimes chop, paths to clear snow ... Therefore, warm, comfortable and beautiful work gloves for a villager will be very useful.

It is easy to sew them, make them beautiful too.

Pattern

pattern details and inner mitt

Each winter mitten essentially consists of two: outer

the ratio of the size of the hand and patterns

work mittens and a warm lining made of thick fabric or fur. A mitten-lining, turned inside out, is inserted into the upper mitten and then their holes are connected by a common edging. For a pair of winter mittens with a lining, you will need to cut out 12 parts - 6 for each: 3 for the lining and 3 for the outer part. They are sewn in one pattern. Look at the photo. The pattern for each mitten consists of three parts: one for the back of the hand and two for the inside, where the thumb is. These two parts of the pattern can be used for both hands - having cut out the details for the right hand, turn the patterns over to the other side and cut out the details for the left. To make it more convenient, each detail of the pattern can be marked - one color for the position for one hand, the other for the other. So you will gain time and will not be mistaken. Before you start making a pattern of mittens for your hand, look at the photo for an approximate ratio of the size of the hand and the pattern - work mittens should not be tight. The upper part of the mittens, where the fingers will fit, is made wider than in ordinary mittens, since fingers often have to be spread out during work, and this requires space.

Croy

inner mittens and hem details

Well, the pattern is ready, now it's time to pick up fabrics. Let's start with the inside - any warm fabric is suitable for it, you can also with a pile, you can also take fur. Linings from old jackets or old sweaters will fit well. If there is nothing suitable, you can quilt batting or synthetic winterizer with any soft fabric. Small scraps of fabric and thread also work well: make a sandwich of two pieces of fabric stuffed with scraps and quilt often. It is better to quilt along the lines of some pattern with a contrasting thread - it will be very cool! In this case, you can combine the lining and the upper mitt into one, making one of the fabrics of the sandwich outer. But then the edge of the seam will remain inside the mitten. You can, of course, sew the mittens by hand - first the inner seam, then the outer one, so that the edges of the seams remain inside. And on top, decorate and strengthen with a cord (or a crocheted chain), sewing it over the seam. There are a lot of options.

hem details for two pairs of mittens

And for the outer, working, mittens, dense and durable fabrics are needed - tarpaulin, coarse linen, or any suitable artificial ones. But not all exterior parts wear out the same way. The biggest load is on the inside of the palm, especially on the fingers. This detail must be made durable, you can sew patches of leather or suede on it in advance. The same patches can be sewn on the inner surface of the thumb, this place is also wiped very quickly. The lower part of the inner side of the palm gets less, and it, like the back side, can be decorated. In the photo, these parts of the mittens are sewn from the edges of fabrics, which always remain after sewing. They are both beautiful and durable, and there are many other ways to use them. But you can come up with something else.

working part of tarpaulin mittens with sewn-on leatherette patches

The sewing technique from the edges is very simple - the edges are placed one at a time on the lining in the right directions, and sewn with a zigzag seam. They try to arrange them with a noticeable overlap, hiding the cut edge under it. The joints of the edges sewn at different angles are covered with the final edge and sewn on both sides. Any non-stretch fabric will work for the lining. Cut out the details of the mittens that you will decorate from it, and proceed. This is a good way to use the leftover edges - various short, defective or just not very beautiful pieces. After all the edges are sewn, turn the workpiece over and evenly trim the ends of the edges along its perimeter.

When cutting, keep in mind that the upper mitten is always made a little larger than the inner one, otherwise the thick lining simply will not fit into it. And the edges of the seams that remain inside will also take some place. You can increase the outer mitten when cutting, adding, depending on the thickness of the fabrics, 0.7 - 1.3 cm around the entire perimeter, except for the hole. Also, don't forget to leave separate seam allowances.

Sewing mittens

we sew the parts with the thumb, a line is drawn with soap, indicating the ends of the seam.

We start sewing with a horizontal seam connecting

horizontal seam spread out in different directions

details of the inner side of the palm. Fold these parts right side in, and before sewing, draw a horizontal line across the fabric across your finger to mark the beginning and end of the seam. Start at the free edge, stepping down the width of the allowance, and finish at the finger. Straighten the stitched blank and fold it with the part for the back of the hand, also with the right sides inward and so that the part with the thumb is on top. When you cross the horizontal seam, straighten it in different directions or bend it up. It is not necessary to bend down, because movements will be difficult and the finger will stick out. When you get to the place where the finger comes close to the seam, bend the finger towards you, sew close to it, fasten and cut the thread. Bend your finger away from you and continue to sew strictly from it. It is possible that there is another way - to change the cut, moving the thumb a little from the edge of the mitten, just the width of the allowance, and it will be possible to sew without interference. Try it - it came to my mind too late (usual shop mittens served as a model for me), and next time I'll try it like this. Perhaps it will be more convenient for the hand if the thumb is slightly shifted to the center, as in gloves.

back side of finished gloves

The inner mitt can be butt-sewn with a simple seam. herringbone if the fabric allows. Then the total thickness of the seams will decrease, and the outer mitten can not be increased so much. The herringbone seam is one of the simplest: the edges of the fabric are closed side by side (in a horizontal position) and sewn together, sticking the needle from below under one edge, then under the other - in turn. When sewing butt seam allowances are not needed.

When all the mittens are sewn, the upper ones must be turned right side out, and the inner ones left inside out. Now put a warm lower mitten on your hand, and a working one on it, and straighten it well. You can fasten them with a few stitches over the seam. Now it remains only to make a border on the hole. Cut out a strip of fabric

ready-made mittens

the desired length, smooth its long edges to the center and fold along in half, like a regular facing. Wrap the edge of the mitten with this strip and start sewing it, stepping back 3-4 cm from the end of the strip. Not reaching the same amount to the other end, connect the strip into a ring, fold and sew. You can, of course, sew the ring right away, but then there is a high probability of error, because it is almost impossible to measure the length absolutely accurately, besides, when sewing, the fabric fits differently, so I prefer this method. You can not do a separate edging, but simply make the upper mitten longer, fold it inward and hem it. But in this case, the edge makes the fabric stiff, and the edging is much more convenient. Plus, it's just another way to decorate.

For convenience, you can sew loops so that the mittens hang on a carnation by the door and are always at hand. It is best to sew on the loops in the opposite side of the thumb - so they will not interfere with work. Or you can simply fasten them with a stitch so that they look inside the mittens, as they do on trousers and skirts, sewing on hanger loops.

Recently, it has become fashionable fur mittens. Elegant and original mittens made of mink, rabbit and other types of fur perfectly complement women's winter clothing, especially if the fur is matched to the color of a fur coat or jacket. However, it is not always possible to buy fur mittens, since their price is quite high, which is not surprising. Indeed, in order to sew, for example, mink mittens, you need to use two small mink skins.
We offer you a simple solution on how to save a lot of money and get cute and fashionable fur mittens. True, for this you need at least a little to be able to sew and a little natural fur.

1. Pattern of fur mittens

In truth, working with fur requires great skill and experience, tools, a special sewing furrier machine. But I think that in order to sew fur mittens at home, a needle and thread are enough and at least be able to use it a little.
First, of course, you need to build a pattern of mittens, the name day of one mitten, because the second mitten is a mirror image of the first. Therefore, it is better to immediately write on each of the details, on the one hand - right, on the other left. Then you certainly will not be mistaken when cutting fur. Which, unfortunately, happens even with experienced tailors.
There are a lot of ways to cut gloves, mittens, mittens. They are almost all similar to each other, differ only in how the thumb is cut out. The so-called glove method looks more elegant on the hand, but it is more difficult to sew and is more suitable for leather than for fur. The method we offer is the simplest. This is how ordinary mittens are cut, the finger is, as it were, pressed to the palm, and there is a connecting seam on the palm. In a fur mitten, these shortcomings will be completely hidden, but it will be easier for you to make a pattern.
The diagram shows that you first need to outline the contours of your hand. We cannot give exact measurements, you yourself must determine what the length of the mitten will be, the width and how long the thumb will be. The only thing that can be said for sure is that the line connecting parts No. 2 and No. 3 should pass slightly in front of the base of the thumb. This will be the main guideline.

No need to explain in detail how to make a pattern fur mittens. Everything is clearly shown in the figure. The only thing worth paying attention to is the top line of the thumb. Look, it has a small "indent" from the line of the whole part of the mitten. The width of this indent is 0.7 - 0.8 cm. Do not forget to make it also on your fur mitten lining pattern.
If it should be taken into account that the mitten is not a glove, it should have freedom, and in addition, there will be a lining inside the mitten, and sometimes a heater. Keep this in mind when making a pattern. Feel free to cut out the details from paper, put your palm on, connect, you can even try to sew them together on a sewing machine. Try on until you get the exact pattern for your fur glove. This will be the most accurate construction method for a fur mitten pattern.

2. Mink mittens can be sewn from the collar

What fur mittens can be sewn from so as not to buy new fur skins? If you want to make mink mittens, you can use a mink collar from mom's old, out-of-fashion coat. Just check the quality of the fur first, otherwise all your work will be in vain. You can also use a mink hat for mittens. But first you need to remove the glue from the skin, which is used to shape the hat, and after that, the skin slightly wetted on the leather fabric must be stretched on a wooden surface, nailed with small nails along the edges. But sometimes the glue is so strong that it is impossible to remove it, keep this in mind. The skin will "stand like a stake", no matter how much you soak it. It’s not difficult to figure out what to sew fur mittens out of if you have old fur things, the main thing is that the fur is not very worn out yet.
Palm, item number 3 can even be cut out of leather. Such fur mittens will be more practical and you can carry a light handbag in them. Mittens entirely made of fur are unlikely to go for this, they are more like a decorative element, the only practical benefit from them is warmth. If you will make a “palm” out of leather, it must be insulated with synthetic winterizer or batting, cutting out the exact same detail.
It is necessary to sew fur parts with each other with a hand furrier seam, applying the parts "face", that is, fur, to each other. When all the details are connected, carefully turn the mittens over your face, especially carefully turn your thumb out.
Now you can sew a lining, exactly the same size as mittens, but already on a sewing machine. Insert it inside the mittens and if everything fits, sew the lining to the mitten. There are many ways to process the edges of the mittens, one of them is to sew the edges by hand, so that the fur is tucked in by 1.5 - 2 cm. inside the mittens.

3. In addition to fur mittens, you can sew accessories

In addition to women's mittens, you can also sew men's mittens for fishing or hunting. Believe me, a man will really appreciate such a gift if he is a passionate fisherman. True, the fur for such mittens needs to be strong, like a sheepskin or a muton. Excellent mittens are obtained from an old sheepskin coat. The sleeves can be used for mittens, and the rest will go to your vest, warming in the winter in a cold room. For sheepskin mittens or pieces of sheepskin coat, lining is not required. The cut parts are firmly connected with a furry seam, and the edges of the mittens are simply tucked "on the face" inside out.
In addition to mittens made of fur or mittens, you can sew a lot of all kinds of other accessories. Here, for example, as in this photo "headphones". Making them is not difficult at all, the main thing is to show a little patience and ingenuity. Very nice women's wallets, handbags, phone cases and many other "baubles" are obtained from natural fur. Try to figure out which ones you need.

We receive overalls at the factory. But even at home we have to do a lot of different work, which requires special clothes.

Now we will consider one detail - mittens. What are they for and how to sew work gloves with your own hands and make a pattern?

direct appointment overalls - protection of a person from injuries when performing various types of work. Mittens perform several functions:

protection of hands from the cold;
from causing various kinds of injuries - cuts, bruises;
from skin contact with harmful chemicals and dirt.

For any production there are rules for the provision of protective clothing, however, in some cases, the resulting tops fail ahead of schedule or simply come across uncomfortable models, with rough seams and not suitable in size.

If you sew work gloves yourself, you can easily avoid such problems. Selecting the best materials and having made an exact pattern according to the size of the palm, you can sew warm fur coats or ordinary tops with your own hands. Such mittens will also come in handy for those who live in a private house or when traveling to the country.

The choice of suitable materials and cut features

Work gloves are different in their purpose. For summer work, it is enough to sew them from a dense material in one layer. The best material for them will be tarpaulin, leather, or heavy-duty denim. You can use old things unsuitable for wear for these purposes, or specially buy suitable material in the store.

The main task of working gloves is to prevent splinters from getting in, to protect against cuts with sharp materials, from pricks with thorns of thorny plants, from unnecessary pollution.

For winter work, you will need to sew an insulated version. In this case, you can use dense cloth, thin felt or drape. It is good to make winter mittens lined with natural or faux fur, quilted batting or warm and soft knitwear. The top layer is best made from denser fabrics, similar to those that we took for summer mittens.

If chemical protection is required, waterproof fabric required- rubberized raincoat or durable bologna.

Instructions for measuring and making patterns

The pattern of work gloves is simple. In some cases, it is enough to simply circle the palm around the perimeter with an allowance of 13-20 mm. This cut is suitable for sewing from elastic stretch materials.

The standard cut of three-piece work mittens is more common - the back side is cut out with a single piece of cloth, and for the inside, two parts are outlined that are sewn together.

Two-layer mittens in this case will have six parts that mark out one pattern each - you get two mittens nested one in one. Just don't forget that details of the cut of the outer part should be slightly larger than the inner. This is necessary so that the inner part easily enters the outer one, without unnecessary folds and wrinkles. When cutting, just make an extra allowance.

The patterns of the right and left mittens are the same, just lay them out on the fabric in a mirror image. For convenience, mark the front side on each part: this way you will avoid annoying mistakes when sewing.

For the correct pattern pattern, you will need to measure:

Palm length from wrist to fingertips;
The width of the palm (for a more accurate result, measure the full girth of the palm at its widest part and divide in half);
The girth of the wrist (with a cut, this indication is also divided by two);
The length and thickness of the thumb;
The distance from the fingertips to the bottom of the thumb.

The parts are sized in such a way that so that when finished they are not too dense, but did not fly off the hand with a wave. To achieve this, you need to add 15 mm on both sides to the measurements of the length and width of the palm and add an allowance for the seam.

The figure below shows a pattern for working mittens in the average size in full size. For convenience, a marking square grid is applied to each part, where the side of the cage is 25 mm.

For those who do not have the skills of self-cutting, Can you make this pattern out of cardboard?. If it is necessary to increase or decrease the pattern, the template is cut along the middle lines and moved apart or shifted to the desired distance.

At the same time, do not forget about the length of the thumb - the pattern for it is adjusted in the same way. For ease of sewing, this pattern can be improved by slightly shifting the location of the thumb to the center. Then there will be no thickening of the seam at the junction of the three parts and the product will turn out to be of better quality.

People of various professions use gloves every day for safety and personal protection. , find out from a special article.

In which areas polymer-coated knitted gloves are actively used, read.

See instructions for measuring and cutting men's work overalls.

Step by step description for sewing

The sewing process is simple and accessible even to beginners. The main thing, follow the sequence of operations and carefully monitor the alignment of the wrong and front sides. Consider sewing a two-layer work mitt.

First, sew the inner mitten - lining. For this:

We sew two parts that cover the palm. We fold them with the front side inward, combining along the outer contour.
We sew from edge to edge, laying a horizontal seam at the same time and connecting the details of the thumb.
We make small incisions at the base of the thumb, and smooth the allowances of the horizontal seam on two sides.
Now it remains to sew the inside and back sides with one continuous line. The lining of the mitten is ready.

We sew the outer mitten in the same way. After sewing all the details, we make small notches in the places where the palm and thumb are rounded so that there are no creases when turning it on the front side.

We insert the lining part into the outer mitten, carefully straighten and combine all the details.

It remains to process the connecting top seam. To do this, you can use the edging from a narrow strip of fabric, or when cutting, increase the length of the upper cut of the outer mitten, and then bend it inside the product and sew. A good option is to sew cuffs from elastic knitwear. So you get additional protection against the penetration of cold air.

For easy storage, sew special loops on the back of the mittens so that they can be hung to dry.

An important point - for stitching we choose the most durable threads.

We also sew a second mitten. As you can see, everything is simple and easy.

Storage and care

The lifespan of your work gloves will depend on How well do you take care of them?. There are few requirements. Here are the main ones:

Do not leave them dirty and crumpled after work.. Wash immediately if heavily soiled. If you just get wet, straighten and dry.
During the drying process, make sure that they not located too close to a heat source otherwise they will either warp or burn.
Designate a dedicated storage space– so you will always find them at the right moment. It is best to make special hooks for hanging.

Work should bring joy to a person. And for this to be true, you should take care of comfortable conditions.

With mittens that you yourself sewed for work, the process itself will become easier and more comfortable. Take care of yourself and your loved ones.

In the process of sewing, you will enjoy the importance of the lesson, and your hands will thank you for the warmth and comfort when working outdoors. Having trained in the manufacture of working models, you can also sew elegant weekend fur coats from the remnants of fur. Let your imagination run wild, decorate the outside with various patterns and wear with pleasure.

Mittens protect a person's hands from winter frost and cold wind. This wardrobe item is a product consisting of two departments. The small one is for the thumb. The wide pocket holds the rest of the fingers. Mittens are warmer than gloves. In harsh climatic zones, only this version of clothing for brushes is used.

Winter mittens can be made from any material. They are knitted and sewn by needlewomen around the world. This item of clothing has a lot of variations and designs. After all, everyone wants to be the owner of a special pair. fleece is very simple. Any woman can sew such mittens for herself. Such products look especially good on children's hands.

Fleece - material for mittens

This material is very popular with manufacturers of sportswear. Needlewomen also love to work with fleece. It is extremely soft and holds heat well. At the same time, if the skin sweats, then the moisture is absorbed by the material, and the body remains dry. It is for this property that sports companies prefer this fabric.

Many people think about how to sew fleece mittens. In fact, there is nothing complicated in this. The color range of the material allows you to experiment and choose any shades. Gloves for children's hands look especially cute. Fleece does not roll down during long-term use, does not shed. The fabric is easily stitched with a machine, no additional processing of the edge is required. This is a very practical and comfortable material, sewing from it is a pleasure.

Patterns for mittens

Children's mittens, as well as adults, are sewn according to pre-prepared blanks. It is important to correctly determine the size of the palm. Mittens should not be narrow and cause discomfort. Therefore, before work, you should circle your hand or the palm of a child on paper. So it will be possible to correctly determine the proportions of the future product.

A pattern of fleece mittens is made from this blank. Any mitten consists of three main parts. They are sewn together with a needle or with a machine. Of course, products stitched on a sewing machine are more durable. Inside is a layer of lining. So the mitten will be warmer and will not get wet through, even if the child decides to play snowballs.

Patterned mittens

The pattern of children's mittens is done in the same way as for an adult. Monochromatic mittens look simple and uninteresting. Of course, if you prefer minimalism in accessories, then feel free to purchase a plain fabric. You can make a variety of inserts that will decorate your mittens. Several colors always look fun and juicy.

For extraordinary and creative personalities, fabric manufacturers offer fleece with a ready-made ornament. There is even a funny little pattern. Images do not fade and do not lose brightness. Therefore, the material is often used for sewing children's clothing. Do not be afraid of bright colors and rich images. In winter, such accessories improve mood and cause positive.

Before you make a pattern, be sure to determine the wrong side and the front side. It is important to correctly place the details on a piece of fabric. If there is an ornament or small pictures on the material, then take this into account when laying out the elements of the pattern. Now you will not wonder how to sew fleece mittens. The pattern shows the component parts of the mitten. Children's mittens can be equipped with an elastic band to prevent loss of accessories. The rope should not restrict movement or crush under clothing.

Fleece mittens decoration

As such elements, you can use buttons, beads or sequins. Decorative little things can be found in the boxes that are in grandmother's chests of drawers. Sometimes you can find very interesting gizmos. If there is nothing suitable, you can always decorate the mittens with ordinary buttons. These circles look cute and stylish.

Snowflakes will also be appropriate. The main thing is to cut out the same pictures. They can be fixed using glue or the most common needle and thread. The second option will be more reliable. The color of the application depends on the shade of the product itself. It is important that the snowflakes contrast.

Children's mittens-paws

Mittens for the smallest can be made in a very interesting form. This pattern of children's mittens is very easy to do. Circle the palm of your angel and draw a diagram using this template. The mitten-paw looks fun. This accessory is very easy to make. You will need a little fabric. But your child will sit in a stroller in exclusive gloves.

An imitation of animal paw pads is sewn on the inside. Your baby will surely appreciate this beauty too. Sew a soft elastic band on the edge of the product so that the mittens do not slip off your hands. But this option will be convenient only in the case of very young children. For older children, we suggest making mittens in the form of some kind of animal.

Hedgehog mittens

The pattern of fleece mittens for decorative accessories is done in the same way. It’s just that in addition to the main details, elements such as ears, paws, tail or mane are thought out. To make cute hedgehog mittens, you will need two colors of fabric, eyes (two pairs) and some black material for the spout. When cutting out the base, do not round off the section for four fingers, but make it a little pointed. This shape will imitate the muzzle of an animal.

After that, cut a few voices that will serve as needles. They are sewn onto a mitten that has not yet been sewn. The eyes will complement the muzzle of the hedgehog. Today, hardware stores offer a large selection of eyes for toys. If you can’t find anything like this, then use ordinary beads or buttons. The nose is made from a black circle. It is sewn on the sharp tip of the product.

Here is such a cute hedgehog will please any child. In this way, you can make different animals. It all depends on the preferences of the children and your imagination.

Mittens as a gift

Buy a yard of fabric (it's pretty cheap) and some embellishments and you'll be able to make more than one pair of baby hand accessories. This way you can even please a few kids. You will definitely enjoy this process. After all, you can show not only your talent, but also a rich imagination.

Children's fleece mittens are very cozy and warm. This material is skin-friendly and does not cause allergies. In winter, they are not cold, while they look stylish and fashionable.

Mittens for the whole family

Today it is very fashionable to buy the same T-shirts or sweaters for the whole family. If you like this image of a single family, then be sure to sew the same mittens for everyone. This look will not go unnoticed. You can complement them with colorful details. We talked about them above.

The main thing is to make each appropriate pattern. Never cut fabric by eye. Outline in advance your hand, the palm of your husband and the palms of your beautiful children. Insert the lining, sew along the contour (do not forget to leave a little space for allowances), turn right side out. The gloves can be embroidered. For example, write words like mom, dad, son, or daughter. Enjoy winter and spend time with your loved ones. Create and make the world brighter and more positive.