Encyclopedia 

How to knit a two-tone scarf. Knitted scarf - accordion: video MK. Long scarf hood

A knitted scarf is an irreplaceable thing that can maximally emphasize a woman's individuality, give her image a special charm. A long maxi scarf, a voluminous snood, which, if necessary, can be put on your head like a hat, a laconic shirt front, an elegant baktus - there are many models! And if you also take into account hundreds of pattern options, a wide selection of knitting threads, then choosing your own, the only model becomes very problematic. But there is a way out: there should be several scarves - for different weather, for different moods, for walking in the park and for work. Variants of a scarf with knitting needles of the scheme and the description of which presented in this article will help you decide and will certainly motivate you to quickly take up the knitting needles.

Scarf hood

For knitting this model, a very simple pattern is used - it is enough to be able to knit the front and back loops. The middle of the scarf is widened for the hood, so that it can be conveniently draped over your head.

Scarf length 224cm.

To knit a scarf hood we need:

  • yarn, 100% merino (50g by 130m) - 400g;
  • knitting needles number 6;
  • hook number 6.

Patterns: elastic: 3l.x3i.

Density: on the elastic band 22.5p. for 18 rubles. will be 10cm by 10cm.

Description - how to knit a scarf hood

We start knitting with a set of 59p. The extreme points in the row are edging, between them we knit a scarf with knitting needles with an elastic band. We must knit with an even cloth up to 144r. (80cm). After that we will increase the width for the hood.

Instructions for making additions and subtractions:

  • we make an increase immediately after the edge p.;
  • if you need to perform two increments, then first we do the 1st, then we knit 1p., after that we perform the 2nd increase;
  • we include all the added p. in the pattern of the elastic: if the added p. is in the purl pattern, then we make the increase in the purl. crossed, and if the added p. should be faces., then the increase is done with the front crossed;
  • for decreases, we knit the loops together according to the pattern - front or purl after the edge p .;
  • if you need to perform two decreases, then after the edge we knit 2p. in 1p., then the next 2p. in 1p.

Along the right edge, add 1 p. 1 time, then in every 2nd p. 2 times in 2p., Then 4 times in 1p.
We got 68p., On which we continue to knit a scarf with a hood with knitting needles with an even fabric.

When the hood has a height of 33cm, i.e. 112cm from the beginning of work, we proceed to knitting its upper part - a cape on the head.
It is equal to 25.5 cm and is knitted with an even fabric. Next, we will decrease n. We do this symmetrically to the increments: in each 2nd p. we subtract 4 times in 1p., 2 times in 2p., 1 time in 1p.

We returned to the original number of items - 59 pcs. Next, we carry out with a flat cloth 144r. (80cm). You need to finish the closure of the item. In the total length of the scarf, the hood has a size of 224cm.

Assembly

Fold the hood in half and sew on the front side. Cut the fringe into 50cm pieces. One strand requires 7 strands. Fold the strands in half and attach the hood to the scarf. You can crochet it or just tie it by passing it through the holes in the pattern. The place of attachment is the front loops of the pattern.

Scarf - bactus with a displaced center: video master class

Openwork scarf shirt front

This model is very practical - wrapped tightly around your neck, it will warm you in cool weather. Such shirt-fronts are very convenient not only for adults. A similar option can be realized by tying the baby's shirt front. To do this, you need to adjust the number of loops according to the actual r-frames.

Dicky has top edge size 50cm.

We need:

  • h / w yarn (50g per 105m) - 150g;
  • circular knitting needles No. 3 and No. 3.5.

The dicky is made with patterns:

  • gum 1l.x2i .;
  • shawl rice-k: all loops in all p. facial;
  • openwork - knit according to the scheme.

Density: with needles No. 3.5 on the front surface 22p. for 30r. equal to 10cm by 10cm; with knitting needles No 3.5 on the openwork, the full horizontal and vertical rapports of the scheme will be 4cm by 6cm.

Dicky - detailed description

First, the shirt-front is knitted in a circular manner in one piece, then the knitting is divided into two parts - front and back.
We type with knitting needles No. 3 132p. and we start knitting round by performing 1p. faces. p. We turn to the elastic band.

With this pattern, the shirt-front is knitted up to 10 cm in height. Then - 1p. faces. p., in which we add 2p at regular intervals. The first 1⁄2 part of the eyelets of 67pcs. we transplant to add. knitting needle, the remaining 67p. - on the needle number 3.5. On these p. On purl. side knit 1p. facial, having finished at the end of 5p., then on the faces. side - 1p. facial p., having added at the end 5p. For only 2 rubles. we added 10p.
In the next. purl p .: 8p. - scarf rice-to, out. - up to the extreme 8 p., 8 p. - shawl rice-k.

Next, the shirt-front is tied according to the algorithm: 8p. - scarf rice-k, openwork according to the scheme - we repeat the rapports up to nine extreme points, 1p. - the first p. Of the scheme, 8p. - a scarf rice-com.
We knit 2 vertical rapports of the scheme. Then - 2p. faces. p. In the next. purl R. finish work on the first part: close. NS.

We transfer the deferred loops to the needles No. 3.5 and repeat the algorithm of the previous knitting.

Assembly

The shirt is sewn together in 5p. scarf rice on both sides.

Knitted scarf - accordion: video MK

Scarf bactus

Dimensions: 27cm by 145cm.

To tie bactus we need:

  • yarn, 100% alpaca (50g by 167m) - 150g;
  • knitting needles number 3.5, circular or straight - your choice;
  • markers (M).

Patterns:

  • scarf rice: all items in all p. - facial;
  • tie according to the scheme.

Bactus fishnet pattern: detailed video master

Beautiful bactus with color transitions

A very simple model to implement. A spectacular look is achieved by an original color scheme.

Size: at your request, determined during work.

We need :

  • yarn, 100% merino (25g by 85m), four colors, similar in tone - 25g each;
  • circular knitting needles No.5.5.

Pattern: shawl rice-k: all loops in all p. - facial.

Density: 21p on a shawl pattern. for 36 rubles. will be 10cm by 10cm.

How to tie bactus

We collect yarn No. 1 3p. and knit a scarf rice-k. At the end of the 3rd p. we make the first increase by knitting from 1p. two - for the upper and lower lobules.
We continue to make increases in the front rows. We have to finish all the yarn of the first color, then go to the second, etc. Keep in mind that the color change should take place all the time on one side of the baktus. Having knitted all four skeins, you need to finish the work by closing p.

Baktus Klapo-Ktus: video master class

Mohair snood scarf

A simple shawl pattern is used for knitting this model. The use of mohair yarn makes the snood warm and really cozy.

Model sizes in two versions:

height 30; 40cm;

circle 70; 80cm.

We will need :

  • yarn, consisting of 75% mohair, 25% silk (25g per 100m) - 50g;
  • circular knitting needles No4.

Pattern: shawl pattern: for straight / reverse knitting - all stitches in all p. facial; with circular knitting - we alternate a number of front stitches with a number of purl stitches.

Density: on a scarf with knitting needles No4 21p. for 41r. will be 10cm by 10cm.

Description

Knitting of this model can be done with circular knitting without a seam or with a flat cloth. In the second option, you will need to grind the edges of the canvas.
You should start working with a set of mohair yarn in two strands with knitting needles No. 4 148; 168p. We remove one thread and then knit a shawl pattern with an even cloth or circular knit. Having knitted 35; 40cm, you need to finish knitting with a closure with a mohair yarn in two strands. If necessary, we sew snood.

Clapotis scarf with openwork pattern: MK video

Openwork mohair snood scarf

Dimensions:

  • height 30cm;
  • circumference 51cm.

We need :

  • yarn, consisting of 75% mohair, 25% silk (25g per 200m) - 25g;
  • yarn, 100% merino (50g by 175m) - 50g;
  • circular knitting needles No.4.5 and No.5.

Patterns: tie according to the scheme.

Density: knitting needles No. 4.5 with mohair yarn plus 18p merino yarn. for 23 rubles. will be 10cm by 10cm; knitting needles No.5 mohair yarn plus 17p merino yarn. for 22 rubles. will be 10cm by 10cm.

Description

With knitting needles No.4.5 we collect 90p in two threads (mohair and merino). and we work in circular rows from scheme A.1. Having knitted 10 rubles, we go to cn. # 5. We continue to knit the pattern of the scheme. Repeating the vertical rapport 8 times from the last 6 p. schemes, we return to the joint venture. No4.5. You need to tie the first 10p. schemes. The product will have a height of 30cm. Close item according to the risk.

Scarf with knitting needles in a simple openwork pattern: video mk

Two-tone scarf in marshmallow shades

The model is crocheted of thick b / w yarn with the "Double Rice" pattern and decorated with large pompoms. Such a scarf can be knitted not only for an adult girl, but also for a child. In this case, you will need to adjust the dimensions downward, taking into account the height of the child.

Dimensions: 34cm by 250cm.

We will need :

  • yarn, 70% wool, 30% alpaca, (50g by 74m) mint color - 400g;
  • the same powdery yarn - 300g;
  • knitting needles number 5,5 straight or circular - of your choice.

Pattern:

  • rice-to "Double rice":
    1p .: 1l., * 1i., 1l. * - from * to * repeat until the end of the river;
    2p .: 1i., * 1l., 1i. * - from * to * we repeat until the end of the river;
    3p .: as 2p .;
    4p.: Like 1p.
    These four p. make up the vertical pattern repeat.

Density: on the "Double Rice" pattern 19p. for 23 rubles. will be 10cm by 10cm.

Description

We begin to knit a two-tone scarf with knitting needles with powdery yarn. We dial 65p. and knit rice-to "Double rice" to a height of 45cm. The last row should be purl. After that, we switch to mint-colored yarn and knit up to 205 cm from the beginning of work. Next, we knit the two-color scarf again with powder yarn up to 250 cm. Finishing work in int. r., freely closing the item according to the risk.
We make two pom-poms Ø10cm from powdery yarn and decorate the edges of the scarf.

Simple and airy scarf with a spider web pattern: video mk

Selection of schemes



Scarf size: circumference 152 cm x width 27 to 37 cm.

To knit a two-color scarf with knitting needles you will need: Lang Yarns yarn "Sagra Diem" (70% sheep wool, 30% alpaca, 90 m / 50 g): 200 g light gray No. 714.0303 and 150 g pink No. 714.0148; straight needles number 6.

Alternation of patterns: 1st and 2nd p .: persons. satin stitch, 3rd and 4th p.: garter stitch. Repeat rows 1-4 continuously.

Decorative additions: right edge: chrome, 3 p. Garter stitch, knit 1 p. Faces. crossed from broach. Left edge: knit 1 st. Of faces. crossed from broach, 3 p. garter stitch, chrome.

Decorative decreases: right edge: chrome, 3 p. Garter stitch, 2 p. Knit together with a tilt to the left (= 1 p. Remove, as persons., 1 person., Then stretch the removed p. Through it). Left edge: knit 2 stitches together., 3 sts garter stitch, chrome.

Knitting density: 16 p. And 25 p. alternating patterns with needles No. 6 = 10 x 10 cm.

Description of knitting a two-color scarf with knitting needles

Cast on 27 sts with light gray thread and 16 sts with pink thread = 43 sts and knit 1st p. = out. R. out. NS.

When changing color, cross the thread from the inside. work side to avoid hole formation.

Knit in alternating patterns, performing on both sides in each 20th p. 8x 1 p. Decorative increase = 59 p.

Then in the next. 20th p. subtract decorative decreases 1x 1 p. and in every 20th p. decrease decorative decreases 7x 1 p. = 43 p. Knit another 20 p. from the last decrease. Close p.

Assembly: Sew the typeset and closed edges together.

Instructions

The hardest part about striped scarf e is a color change. For example, when knitting scarf but you need to dial the loops to the desired width and knit one. After the strip with this color is completed, at the end of the row you need to cross with the next color, set aside the ball of the previous color and continue to knit further in a different color.

If the strips are in scarf f it turns out to be wide enough, then you can cross the threads of different ones every two rows, or use broaches on the side scarf a. Then, to hide them, you can process the finished scarf .

If in your scarf e horizontal stripes, then the change of thread occurs along the edge scarf a. Threads of a different color are simply lengthwise and periodically hooked into the closing loops of the row. Subsequently, these thickenings can be masked with brushes, which are usually scarf NS.

For making fringes on scarf you need to take a piece of thread, bend it in half and stretch it with a hook to the edge scarf a. Then the two free ends of the thread are pulled through the loop and tightened. After that, all that remains is to wash scarf and steam it off.

Related Videos

note

When choosing threads for a striped scarf, make sure that they do not fade during washing, otherwise the scarf may be damaged.

Helpful advice

When knitting a scarf, keep in mind that knitted items stretch after washing, so you need to dry them on a horizontal surface.

Sources:

  • striped scarves
  • How to tie a scarf with an English elastic band
  • Knitting for men

Knitted fabrics are an essential accessory in the cold season. They are able to emphasize the appearance or add variety to everyday clothes. The main feature of scarves is that you don't have to buy them. Indeed, sometimes in stores and markets it is difficult to find a design that suits you. To do this, just pick up the knitting needles, buy yarn and start creating your own unique image.

You will need

  • - knitting needles number 5
  • - 50 g of yarn of different colors

Instructions

Determine the size and design of the scarf. To do this, it is necessary to determine the purpose of the future scarf. If it is on top or, then it is made wide and long. If, however, under outerwear, then it is better to make a short and narrow scarf. Choose the color and type of yarn, choose a pattern. The larger the width of the scarf, the thicker the yarn should be. For a scarf in strip it is necessary to choose the dominant and secondary colors. They can be both combined and contrasting. It all depends on your imagination and what kind of scarf will serve as an accessory.

Cast on the needles the required number of loops with the dominant color yarn and knit with garter stitch. When it becomes necessary to change to a different color, do not use scissors or cut the thread. In this case, sloppy ends of the threads will dangle along the edge of the scarf, which will ruin the appearance of the product. Take the end of the thread and pass it over the second color thread. You can also make another design move at the transition point. When moving from one color to another, leave 10-12 cm of threads of each color. After knitting is finished, tie the ends of the threads in the form of tassels. Such a scarf will have an original and unusual look.

Tie the base of the scarf. When you knit the required length of the scarf, you can start decorating it. If the scarf will be worn, then the finishing may not be carried out. If the model will be worn on top, then be sure to complete the appearance of the product. If, when knitting, the sides of the scarf come out uneven, then they must be tied in 1 or 2 rows or sewn diagonally with an applique. The ends of the scarf can be left as they are or decorated with design elements: pom-poms, tassels, and more. You can also use pieces of fur, leather, beads, various threads.

Related Videos

note

The knitting density should be 10x10 cm with 22 stitches and 30 rows.

Tie male scarf maybe even the most inexperienced knitter is a very simple model. But even a simple thing can be a good gift for a man, which he will be proud of, especially if it is neatly knitted, and the color or combination of colors is chosen tastefully.

You will need

  • Yarn (3-5 skeins depending on the length and thickness of the thread)
  • Knitting needles (the number of knitting needles is selected depending on the thickness of the yarn)
  • Scissors
  • Needle with a wide eye for closing loops
  • Initial knitting skills (loops set and closure, elastic knitting)

Instructions

First, knit so that the number of loops for the selected width scarf a. To do this, untie about 12x12 cm with the pattern that you have chosen for scarf a. Wash, dry, iron lightly and count the number of stitches of the sample at 10 cm.Let's say that there are 25 stitches in 10 cm, 1 cm = 2.5 stitches. To you scarf width 20 cm, which means we multiply 20 by 2.5, we get 50 loops, that is how many loops you will need to type on the knitting needles for the desired width.

Cast on the needles the required number of loops and knit the desired length with the selected pattern scarf a.

Complete scarf you can either, or with a needle with a wide eye, into which the thread itself from the yarn is threaded. When knitting, close the loops according to the pattern, i.e. knit alternately with knit and purl, and pull each previous loop through the next. So edge scarf but will look neat, similar to the start edge.

Cut the thread, secure and hide the ends.

Related Videos

note

Wash the finished product in lukewarm water (up to 30C) so that it does not deform or fade.
Do not squeeze, but let the water drain (place the scarf over the bathtub on a special drainage net).
Dry the knitted garment unfolded on a horizontal surface.

Helpful advice

From thick yarn on thick knitting needles, a scarf knits much faster. In addition, it looks stylish and fashionable, since chunky knit has been in fashion's favor for several seasons.

A do-it-yourself scarf can be a source of pride for its author. To make this scarf beautiful and neat, you need to properly fasten the loops of the last row. It's not difficult at all, but then you can be deservedly proud of your work.

You will need

  • Thread
  • Knitting needles
  • Almost knitted scarf

Instructions

Pass the right knitting needle through the first two stitches on the left knitting needle. Pick up and drag the working thread through them with your right knitting needle.

Remove the resulting loop from the right knitting needle and put it on the left. Thread the right knitting needle again through the first two stitches on the left knitting needle, pick up and pull the working thread through them with the right knitting needle. If there are purl and knit stitches in the last row, you can knit them as purl and knit stitches, or you can end the entire last row with only purl or knit stitches only. Knit in this way until you have one last loop left.

Cut the working thread about ten centimeters from the loop. Pass the end of the working thread through the loop and tighten the knot. Done, the last row is secured. The tail of the working thread can be hidden by passing it through the loops of the last row using a crochet hook.

Related Videos

note

When finishing the last row, keep the working thread loose and do not tighten the loops, otherwise the even fabric will wrinkle near the last row. This is partially fixable with the help of steaming, but, nevertheless, not very aesthetically pleasing.

Helpful advice

You can try knitting only the first two stitches together in each row. Then the scarf will end not with a wide edge, but with a corner to which you can attach a pompom or tassel.

The end of the scarf can be trimmed with a fringe. It can be made from the same threads that were used for the scarf or from threads of any other suitable color. To create a fringe, cut a piece of thread four lengths of the intended fringe and fold it in half. With a crochet hook, hook it in the middle and pull it through the knitted fabric close to the edge so that a loop of threads forms. Thread the ends of the threads into this loop and tighten the knot. Work the entire end of the scarf this way. If necessary, the edges of the fringe can be trimmed with scissors.

Quite unexpected, but the combination of hand-knitted and fabric looks interesting. You can trim the end of the scarf with any suitable fabric or faux fur. It is advisable that the material that will go to the edge of the scarf is combined with any details of your wardrobe.

Sources:

  • Description of the technique for securing the last row when knitting
  • how to knit the last row

Scarf has long been an integral part of the wardrobe of almost every person. It can be made from different materials and serve for different purposes. A warm, two-tone striped scarf that will keep you warm in cold weather isn't that hard to knit on your own.

You will need

  • - 300 g of wool yarn with polyamide, two colors;
  • - knitting needles No. 3.5.

Instructions

Cast on 61 sts on 3.5mm needles with the same color. Next, knit straight with the front and back rows in the following pattern: 1 hem loop, 2 pearl loops, 55 elastic loops, 2 pearl loops, 1 hem.

Remember how the patterns fit correctly. In a small pearl pattern on the front rows, 1 front and 1 purl loops alternate. On the seamy rows, all loops are knitted the other way around. Facial - purl, and purl - facial. To knit a regular elastic, you need to remember that the front rows assume the alternation of 1 front and 1 purl loops. In the purl rows, all loops are knitted according to the pattern. Facial - with facial, and purl - with purl loops.

Alternate colored stripes while knitting patterns. You can knit strips as wide as you like. In this case, the stripes alternate every four rows, after two front and two purl. When changing the color of the working thread, do not forget to cross the auxiliary thread when knitting the first loop of the row. At the same time, try not to tighten the canvas.

Close the loops when your scarf is tied in a length of 1.2 m. Decorate the ends of the scarf with a two-strand fringe, approximately 6 cm long.

You can determine the size of the scarf yourself. To make it exactly the length and width that you need in the finished form, you must first tie the sample. Then calculate the loops. To do this, you need to measure the number of loops in 1 cm and simply multiply by the width of the scarf. Next, you need to take into account that your scarf can stretch during washing. The linked sample will help here. Moisten it and check how much it stretches in relation to the associated length. For example, if after washing your sample of 10 cm stretched by 2 cm, then with a tied length of your scarf of 1 meter, you should take into account that it will stretch at least 20 cm.Depending on the severity of the threads, it may be even slightly longer ...

This scarf is very easy to knit, but a true fan of this series of children's fiction will be very pleased with it. And even if you are not good at knitting, you can do the job.

For a scarf, you will need wool of two colors (bright yellow and burgundy), knitting needles, scissors. Wool blend threads are also suitable. But it is better not to choose synthetics, because our winters are not very warm.

Helpful advice: when buying wool, pay attention to the approximate calculation of thread consumption and the recommended number of knitting needles (this information is indicated on the paper label that is on each skein). Purchase threads with the expectation of the most comfortable product sizes for the future owner.

Work process:

1. Tie a sample (for example, 10 or 20 loops for 10-20 rows), which will help to accurately calculate the size of the future scarf.

2. Cast on the desired number of loops and knit a straight fabric in front rows. Change the color every 20-25 rows to get wide stripes, like on the scarf shown in the photo below:

Helpful advice: The Harry Potter scarf can also be tied with a 1 by 1 or 2 by 2 elastic band (each row is knitted by alternating 1 front-1 purl or 2 front-2 purl).

3. After the scarf is knitted, decorate it with tassels (in principle, this is not necessary). To make tassels for a scarf, cut the threads of two colors into lengths of about 40 cm (in this case, the length of each tassel will be slightly less than 20 cm). Cast on 10-15 such segments, fold them in half and pass them over the edge of the scarf with a thick crochet, passing the free part of the thread through the resulting loop.

When choosing clothes for the cold season, focus on accessories. This season's must-have is a knitted scarf. It will become an important part of your everyday wardrobe. A scarf will not only help create a unique look, but will also warm you in cold weather.

The easiest way is to buy a ready-made item in a store. But not always there is a suitable composition of material, color, and even the size may not suit a demanding customer. Therefore, it is better to create a unique, inimitable thing with your own hands. In addition, such a product will be a pleasant gift for any occasion, and the manufacturing process itself will help while away the evening.

Even a beginner needlewoman will not be difficult to knit a scarf.

When choosing a performance technique, you should remember about the features of knitting and crocheting. When choosing a tool for creativity, pay attention to the density, relief, structure of the future product. The quality of your product depends on it.

Features of working with knitting needles are as follows:

  • It must be remembered that the working thread is tensioned evenly. With loops of different sizes, the thing will look sloppy.
  • The yarn needs to be chosen thicker, because the knitting needles hide the excess thickness, even the thickest threads will make a scarf soft.
  • Thin threads are worth choosing if you want a luxurious fluffy scarf.
  • The knitted thing has a front and a seamy side.
  • Knitting needles are ideal for embossed designs.

Crochet

This technique also has its own characteristics:

  • You should knit the row to the end, without missing a single loop, otherwise the edge of the scarf will come out uneven.
  • When choosing a working thread, you should pay attention to its thickness. Very thick yarn will not work: the garment will turn out to be coarse.

Choose a scheme based on how warm you want your masterpiece to be:

  • For a light filigree scarf, a pattern with a large number of so-called air loops and columns with five crochets is suitable.
  • For a denser knit, single crochet, half-crochet, single crochet, "bumps", lush columns are suitable.

If the thing has a double-sided pattern, then mostly smooth patterns are used.

ADVICE! If you've never tried needlework, it's worth learning how to crochet. It is easier to work with it due to one working loop, while when working with knitting needles, a very large number of them are recruited. Even if you miss one loop, the pattern will get lost, and the product will not look as it should.

The choice of yarn and knitting needles for a scarf with patterns

Shop counters are full of countless beautiful rolls with bright labels. Yarn differs in thread thickness, twist, composition. The most important is the composition.

Threads are:

  • cotton;
  • acrylic;
  • woolen;
  • mixed.

Cotton is fine for a light, decorative scarf, but if you need a warm scarf, choose wool or blended yarn. A wool scarf can prick, while a mixed fiber product is softer and more pleasant to the touch.

ATTENTION! You should always buy oversized yarn. Yarns from different batches from the same manufacturer can vary significantly in shades.

The choice of knitting tool depends on the desired "airiness" of the thing. The thicker the diameter of the needles, the more voluminous the pattern will turn out.

Knitting needles are made from:

  • bamboo;
  • plastic;
  • wood;
  • metal.

For a large number of patterns, a medium tipped tool is suitable.

IMPORTANT! In order not to be mistaken with the diameter, you should carefully look at the label. The manufacturer always indicates the most suitable spoke number.

Varieties of patterns for knitting a scarf with knitting needles

The choice of drawings is very wide. They are double-sided and simple, smooth, embossed and fluffy, airy and delicate. There are many videos on this topic on the Internet, but if the information is presented in the form of text and pictures, you can always return to them, even in the absence of the Internet.

Consider the technique for performing some of them with a detailed description (master class).

Simple pattern for beginners

The easiest way to knit is with an elastic band. Such a scarf will warm you on cold autumn evenings, it will turn out to be dense and warm. It is very easy to tie it. You will need 200 grams of yarn, knitting needles number 5.

There are several options for this method:

This type of pattern has been very popular for scarves for several seasons. It is good because it looks the same on both sides. Mastering it is not difficult at all.

We knit a winter men's scarf with a pearl pattern

We need 250 grams of yarn, knitting needles number 8.

We collect 25 loops and knit with a large pearl pattern according to the scheme. We follow the sequence. At the end we close the loops .. The peculiarity of this pattern is that you can knit both in length and in width.

The first, second rows - we alternate the front and back loops.

Third, fourth - we knit the other way around.

We alternate knitting in two rows until the desired length is obtained.

Double-sided two-tone patterns

Knit with threads of two different shades. Both sides of the product will be "right".

Legend for the scheme:

I - front;

- - purl;

V - thrown over.

Knitting steps:

  • 0 row: take the thread of the first color and knit the entire row with the front ones.
  • 1 row: edge loop (we just throw it over to another knitting needle), purl three, remove one, leave the thread behind the product, purl three, remove one, leave the thread behind the product. We knit to the end, close with an edge loop.
  • 2nd row: we introduce a thread of a different color. The first edge, one front, remove one loop, leave the thread in front of the product, three front, remove one, leave the thread in front of the product, close the edge.
  • 3 row: we knit in the same color as in the second row, one hem, continue knitting according to the pattern, pull one removed purl, leave the thread behind the product, knit three purl, pull the removed loop, leave the thread behind the product. We continue to the end of the row, close the edging.
  • 4 and 5 rows by analogy with the second and third.

IMPORTANT! Change the color of the thread every two rows. When removing, pay attention: the thread remains on the side with the front loops.

Openwork pattern

An airy openwork scarf will be a wonderful decoration for your wardrobe. For such work, yarn with angora, or mohair, is perfect.

Knitting steps:

  • To complete the work, dial the required number of loops on the knitting needles and knit three wave-like motifs according to the pattern.
  • We knit the first eight rows like this: odd front loops, even ones with purl.
  • We begin the ninth row with two front ones, 3 times we knit 2 together with the front with a tilt to the left, yarn, front, yarn, front, yarn, front, yarn, front, yarn, front, yarn, three times we knit 2 together with the front with a tilt to the right.
  • We knit the tenth in a mirror image.
  • From the eleventh to the sixteenth: odd - facial, even - purl.
  • From the seventeenth row, repeat rows 9-16.

Oriental openwork pattern

Knitted items always remain in trend, the fashion for them never goes away. Only knitting technologies, patterns, length of products change. The most popular knitted products that almost everyone has are socks, mittens or gloves, hats and scarves, pullovers, sweaters. If most products require knitting skill, then a beginner is also capable of making a straight scarf with knitting needles on his own.

Knitted items always remain in trend

The easiest way to knit men's scarves is. As a rule, thick threads are taken for them, which implies a large knit, and the corresponding thickness of the knitting needle.

Range of male tones:

  • Navy blue;
  • Brown;
  • Gray;
  • Black;
  • White.

Scarf for a mature man

  1. 38 loops are typed on the needles number 3;
  2. 1 row: edging; 6 facial; 6 purl; 6 facial; 6 purl; 6 facial; 6 purl; edging.
  3. Rows 2-7 are knitted in accordance with the pattern.
  4. 8 row: it is necessary to knit purl loops instead of front loops and vice versa.
  5. The next 6 rows are knitted in accordance with the pattern. You should get textured squares. The principle of drawing up the "chessboard" pattern.
  6. After reaching the required length of the product, the last row is closed. The tail of the thread is hidden; it is better to stretch it between the threads of the last row.
  7. As a decoration, you can make a rare fringe, consisting of tassels of 4-6 strands. For this, a thread with a length of 8 cm is cut, folded in 2-3 pieces, bent in half. At certain intervals, they are hooked to the first and last rows of the work.

Attention! The lack of decorations on the ends of the scarf makes the work look unfinished.

Knitting scarf for beginners (video)

Schemes and descriptions for beginners: unisex scarves

Thin long scarves are worn by women, teenagers, stylish young men. Such neck decorations can be monochromatic and combined, narrow and wide. The choice of product width depends on the choice of yarn and knitting needles, respectively.

  1. For knitting from cotton multilayer yarn, knitting needles are taken No. 1.5-2. The knit should be tight.
  2. The coat and the thick volume suggest a large expressive knit. Here, the choice of knitting needles from # 3 to # 6 is influenced by the selected pattern and thread thickness.
  3. Long scarf designs are the simplest.

Attention! When planning a combined two-color scarf, you should take yarn of the same brand and thickness. Combinations of three or more colors in thick scarves look bad.

Such neck decorations can be monochromatic and combined, narrow and wide

Knitting patterns:

  1. Elastic band 1 to 1 - alternation of front and back loops.
  2. English elastic - an odd number of loops is typed. 1 row: the edging is removed; 1 front loop; straight yarn; the next loop is removed without knitting. Except for the hem loop, the pattern is repeated until the end of the row. 2 row: after the edge, removed loop, a straight yarn immediately follows; the next loop is removed; the loop and yarn of the previous row are knitted together with a front loop. The pattern is repeated until the end of the row. 3rd row: edging; a loop with a crochet of the previous row is connected with a front loop; they are followed by a straight yarn, we remove the next loop. The rapport of this knit consists of two rows - the second and the third. They will alternate until the end of the product. The last row is closed in the usual way - two loops are knitted together, the resulting loop is returned to the right knitting needle and closed with the next one. Work continues until the last loop. The "straight" yarn is made by throwing the thread that is at work on the needle, moving away from you. A "reverse" yarn is made by moving towards oneself; it is used in knitting openings.
  3. Garter stitch: 1st row - all knit; 2 row - all knit. So until the end of knitting.

Scarves made according to these patterns are double-sided.

Cute scarf for a boy: step by step instructions

We knit a children's scarf for a boy, as well as for a toddler girl, from thin yarn on circular knitting needles with face loops, alternating light and dark stripes of the same size. At the end of the work, the most time-consuming process of decorating the ends begins. To do this, you need to make a pattern for the face, paws and tail of a cat, raccoon, tiger, dog or other animal. Depending on who the scarf should resemble, the color of the yarn is selected. This will give the impression that a cartoon friend is resting on the child's neck. It is more convenient to knit the paws and tail with five knitting needles. It is easier to crochet the muzzle, but you can also knit it on the needles using the technology of shortened and full rows.

For school-age children, a two-tone scarf is more suitable:

  • 7 first rows - garter stitch. There are 38 loops in a row.
  • 8 row: edge, then alternation of 6 front 1 purl loop.
  • For the next 6 rows, you need to form triangles. To do this, each element of the front loops is reduced on both sides by one, they are knitted with the wrong side, due to this, the opposite elements are expanded.
  • The next 6 rows will decrease the number of purl stitches in favor of knit stitches.
  • It is necessary to complete this rapport with yarn of the first tone, knitting 2-3 rows of garter stitch.
  • The pattern of 6 rows forming textured triangles is repeated through the dividing lines made in garter stitch.
  • The final knitting element consists of 12 rows of triangles and 7 rows of a different color, made in garter stitch.

A two-tone scarf is suitable for school-age children

Beautiful scarf for a woman: new model

A beautiful scarf does not always imply the presence of a pattern, openwork or a combination of several thread colors. The new model of the "snood" scarf is a scarf, a hat, a kind of knitted coat, a decorative high collar. Such a variety of use of one wardrobe item is achieved by the fact that this scarf has no edges. It fits round.

  1. Having checked the density of the garter stitch on the sample, for the manufacture of the scarf, the loops are drawn on the circular knitting needles of the loop at the rate of one and a half meters of the width of the product.
  2. Purl loops (on needles No. 4; 5; 6) knit 5 rows.
  3. This is followed by 5 front rows.
  4. In this way, 50-60 cm of fabric is knitted.
  5. The hinges are closed. It is most convenient to carry out this stage by crocheting the diameter corresponding to the number of knitting needles.

When knitting a snood, you can use smooth knitting or a textured pattern - with braids, rhombuses, bumps or other convex elements. A variety of patterns can be made from them. A set of loops is made on ordinary knitting needles. Their number must be calculated for the width of the product so that all types of patterns used fit on the canvas completely. When the required knitting length is reached, the loops of the last row are closed on the seamy side. They must be docked with the hinges of the first row.

It is not difficult to tie a fashionable snood, it is more important to come up with original versions of its socks, to learn how to use it as a gate with a decorative collar. For example, a figure eight is a shape that allows a scarf to be worn to protect the throat and head.

Pipe or snail

This item of women's wardrobe does not differ in the complexity of the drawing, but it looks very impressive. In strong wind, frost or rain, it can be used instead of a headgear. On warm days, it will only protect the neck. You can knit a corrugated scarf-hat without any subtraction. This principle is good when choosing fine cotton yarns.

  1. A set of loops is made on knitting needles No. 1.5 or No. 2, connected with ligature, since a thing that does not have a connecting seam looks more spectacular.
  2. The first 10-15 rows are better with a dense elastic band.
  3. Until the end of knitting, the alternation will go: 10 front rows; Purl 10.
  4. You can finish the work with a hook. It is more convenient for them to close the hinges.
  5. For younger girls, you can knit a fringe on the top of the pipe.

Attention! So that when wearing a snail as a hat, there is no inconvenience from a large volume of material under the chin, after 10-15 cm of circular knitting, you need to use a system of shortened rows. They should not affect the front third of the product.

How to knit an openwork scarf

Knitting an openwork scarf consists in alternating the front, back loops and reverse yarns in the rows of the front side of the product, the back rows are knitted with loops corresponding to the name of the side. This rule works for complex knitting patterns. Simple repeating patterns that do not have a complex pattern, consisting only of holes, are knitted according to the pattern:

  • 1 row: edging; front, reverse yarn, front yarn, yarn and so on until the end of the row.
  • 2nd row: edging; yarn and loop are knitted together, and so on until the end. From the third row, the pattern is repeated.

When choosing a more complex pattern, the set of loops must be compared with the required number of loops for each ornament used. Detailed descriptions of complex drawings are not as convenient as diagrams. They give a visual idea of ​​what should be the result.

The scarf will turn out beautiful in any case.

Scarf-hood with knitting needles

There is nothing complicated in knitting this scarf. The number of loops is set in accordance with the desire for the depth of the hood minus the 5 cm elastic band. This is the width of the item.

There is nothing complicated in knitting this scarf.

The pattern is selected one-sided. A variety of braids, ropes, lashes, bumps look spectacular. After tying the canvas, you need to knit 5 cm with an elastic band: one to one. The hood is joined by a textile seam on the inside. You can decorate the scarf with a pom-pom at the top of the hood and long tassels at the ends.

Long scarf hood

A woman's scarf is, first of all, an adornment. It is not always successful to choose a pattern for a headset from a hat with a scarf. Therefore, it is better to knit the kit right away. No special skills are required for this.

  1. It is better to take thick yarn so that the drawing is voluminous.
  2. A small elastic band at the ends of the scarf will be appropriate as a picture frame.
  3. It is better to arrange complex drawings on a sheet of paper in a detailed description.
  4. The length of the hood is chosen at will, and its width must be sufficient in order to completely cover the head.
  5. It is necessary to complete the manufacture of the hood by connecting the back of the cap. To do this, fold the product in half. It is more convenient to lay a knitted seam "forward needle" from the top of the work.

Advice! When knitting a hood from thin threads, it is better to avoid crochet patterns. If you choose openwork for such a scarf-hat, then it should turn out to be double. The inner plank of the product should be simple knitted. It is better to knit decorative and simple strips separately. At the final stage of work, they can be connected with a crochet decorative stitch "rachis step".

Snood knitting: knitting for beginners (video)

Scarves can be worn not only in the cold season. Thin cobwebs, openwork floral motifs of a neck long jewelry will be a great addition to formal business suits and evening dresses. You can cover your head and throat with mohair scarves on cool autumn evenings. Triangular short scarves with buttons, clamps (they are also called "Pipe", "snail") are knitted from thick yarn for the winter. They perfectly replace the hat.