How to sew jeans in legs. Jeans suturing methods, detailed instructions

03.09.2019

Changeable fashion dictates its own rules regarding the style of clothing - this is a long-known fact. And all women obey her commands only in order to always look attractive. This is precisely the purpose of the constant renewal of the wardrobe. And almost every fashionista in the closet has jeans or trousers, the style of which is somewhat outdated. A flare from the knee or from the hip has long been replaced by models with straight or tapered legs. And, it would seem, a completely new thing quickly fades into the background from the favorites of the wardrobe. However, a change in fashion trends does not mean that outdated trousers should be thrown away. Of course, they can continue to be worn, but in order to keep pace with the times, they can be given a new life. How to do it? flares and make fashionable "pipes" out of them?

It also happens that the fabric stretches while wearing, or after the next diet it is possible to lose several kilograms, and now the favorite thing no longer fits the figure so perfectly. in this case? It is about how to give a second life to your favorite pants, and will be discussed further.

How to alter flared trousers

To give new life to your favorite jeans, the style of which has long sunk into oblivion, you should turn the trousers inside out and draw a line from the very waist to the bottom along which the new line will pass. The same should be done along the step seam of the trousers. To do this, you can use a long ruler or take other fashionable jeans and simply circle them along the contour. Next, you need to baste new seams and try on the pants to make sure they fit well. After that, all excess fabric is cut off, and the edges are overcast. It should be borne in mind that usually the length is longer than that of and therefore they will need to be hemmed again.

How to reduce pants at the waist

It often happens that women with a thin waist are faced with the problem of selecting trousers. Often, with such features of the figure, the thing in the hips fits perfectly, but on the sides and on the back it is large. How to solve this problem and how to sew pants in the belt? There are several ways that experienced craftsmen in expensive ateliers use.

Method 1: along the side seam

Many believe that this option is only suitable for those models that do not have a product or any decorative rivets. However, this is not at all the case. First, let's take a look at how to sew classic-cut trousers made of plain fabric without additional elements.

To begin with, you should slightly rip off the belt at a distance of about 10 cm from the side seam in one and the other direction. Then put on the trousers inside out and measure the amount of excess fabric that should be removed, and at what angle to make the bevel of the seam. It is best to use either tailor's needles or a basting for this. It should be noted that when sewing a new stitch, the transition from the already existing side seam should be as smooth as possible so that no corners and irregularities appear on the fabric on the front side. Next, using a special device or simple nail scissors, you should open the old line and smooth this area with an iron. Then adjust the waistband of the trousers to size, cut off the excess fabric, sweep it in place and sew it on the sewing machine.

How to sew trousers if there are a lot of decorative elements on the front and back panels? In this case, you need to measure how many extra centimeters you need to remove in the belt. You can open the side seam and displace one of the panels, covering all centimeters on the section of trousers free from decorative elements. It should only be understood that in this case, the side seam will shift either forward or backward, depending on which side has more decorations.

Method 2: additional darts

This option is suitable for those whose trousers are very bulging in the belt at the back. Often, slight suturing of the product only on the sides does not solve this problem. In this case, a few additional darts on the back of the trousers will help. In order to make them, you should rip off the belt along the entire back and cut it along the middle seam. Then try on the product, putting on the pants inside out and, using tailor's pins, pin symmetrical darts on both sides of the middle seam. Thus, in the belt you can remove up to 6 cm. After that, it remains to adjust the upper bar to the new size and sew it in place. Even an inexperienced seamstress can cope with such work, since it is easiest to sew trousers in this way. There is no need to unpick vertical factory seams and re-do decorative stitches.

Method 3: at the back seam

Many craftsmen reduce trousers at the waist only along the back seam. This allows you to keep all the decorative elements on the sides of the product. How to sew on the back seam? First, you should completely unbind the belt in the back area and dissolve the back stitch approximately to the middle. Next, you should put on and button up your trousers, and then bast a new seam. Then sew a new stitch on the sewing machine and adjust the belt.

If you get big, your jeans. Then there is only one way out - they must be sutured. The process is not complicated, and most importantly, it can be done at home, save your money. Next, consider the options for suturing themselves.

Summary:

How to sew jeans in legs correctly?

At the present time, wide jeans are not in trend, narrower ones have replaced them. If you are a fashion connoisseur and adhere to novelties, then you have repeatedly asked yourself the question - how can wide jeans be turned into skinny ones. Next, let's take a look at a few tips:

First you need to turn the jeans inside out, then put on yourself and use pins to allocate a place for stitching, do not forget to leave two or three centimeters - a margin in case the jeans sit down.
Take off the jeans, draw a line between the pins, then put them back on and tweak as needed. Next, remove and leave the jeans turned inside out.
We put our jeans neatly on the table where the sewing machine is, see that our drawn line is even. For an even seam.
Next, we need a needle and thread. We begin to draw the line neatly along the line. We do the same with the second part of the jeans.
We put on our jeans, if you feel comfortable and you like this stitching, then proceed to the final stage.
Take off your jeans. Inside the rest of the fabric, cut off with scissors, while leaving 1-1.5 cm of fabric from the seam. After you cut it off, you need to make the second line.

This procedure may seem daunting to you at first. If you are afraid to tackle your gin yourself, ask an experienced person for help or carry it to the atelier. But there is another option, practice on cheap jeans that are not so pathetic. You will gain experience and it will not be so scary to sew in your favorite jeans.

How to sew jeans at the waist?

Jeans are sewn according to established standards, so they look less attractive on girls with an imperfect figure. There is only one way out - you need to suture them so that they sit on your waist, like a glove. Next, consider the step-by-step suturing at home:

If the jeans are 2-3 centimeters larger than the waist, then here you can buy a wide elastic band. Sew neatly into the inside of the jeans, in the belt area.
If the jeans are 3-7 centimeters longer than the waist, then you need to sew them in. First you need to rip up the waistband at the back of your jeans.
Then turn out the jeans and put them on. Next, you need to highlight with pins the groove that is in the back, for this ask someone who will be next to you. Tell the undercut to be straight.
The next action - you need to remove the jeans and the selected area, you need to flash it. Further, where it was stitched it is necessary to iron it. Then, taking the thread, fix the groove on the outside.
Next, you need to cut the belt and unplug the middle belt loop. Cut off the resulting excess parts. Then we sew our cut off belt with jeans. We hide the seam that has turned out as a result with the help of a belt loop.

This we have considered one of the ways. Also, there is a more laborious and time-consuming method compared to the previous one. Here's a step-by-step guide:

First you need to unscrew the belt loop, which is located at the back in the center. You also need to rip the belt from the central seam in both directions, about eight to nine centimeters. But this must be done carefully so as not to spoil the thing.
Next, we need to rip the seam, which is between the legs, about ten centimeters. For those who do not know, this seam is called a step seam in another way.
Then all the seams must be ironed.
The next step is to pin the middle seam to avoid further movement. Next, we turn our jeans inside out and fasten all the seams inside with pins.
When all seams are secured from the inside, you can remove the pins from the outside. Then you need to steam the seams.
Further, stepping back two centimeters from the middle seam, draw a line with a pencil, you should get something like a triangle.
Then you need to make one line along the line, if everything is fine, then we sew the crotch seam inside with a single line, and on the outside we make a double line.
After the belt has been cut into two equal parts, you need to attach it to the jeans and see if there is excess fabric, it needs to be removed. When the threads and remnants of fabric have been removed, you need to carefully make a line and the jeans are ready.

The proposed option is suitable for people who are confident in their abilities, since if you have never taken things in, then you need to use the first method. There is a high probability that the item will be damaged. But if you used the second method, the result of the work is guaranteed to be of high quality.

How to sew jeans one size down?

If you love dieting, and the diet is working, then you may have problems with your wardrobe. This method is designed to reduce the size of the jeans. Consider a step-by-step guide:

The first thing you can do is wash your jeans in a typewriter at 95 C and then put a cold spin. These steps should be repeated two times in a row. Then put the jeans on the battery. You will get the expected effect, but jeans can stretch over time. Therefore, this procedure must be repeated once more.
Another one hundred percent method is suturing. It is necessary to turn the jeans inside out, mark the side with pins, the place that will be cut off. Next, you need to draw a line along the marked place and make a line along the line, you can manually, since then we will split this line.
Then you need to put on jeans, check that everything fits, you are comfortable in them. Remove the jeans and cut off the excess fabric. Then we make a double line on a typewriter.
There is also the easiest way - this is suturing with side seams. Make cuts on the back of the jeans on the sides. After that, you secure the future seam with pins. Make a temporary line. Measure jeans, if everything is fine, cut off an unnecessary piece of fabric and make a double line on a sewing machine.

In conclusion: there is a way out of any situation, if you still have your jeans, but you have become smaller or another fashion has come, then, depending on the situation, using the above methods, you can save your favorite jeans, while you will be able to save money. If you have your jeans sewn in, you will be at home. You will not only gain experience, but also enjoy the work and pride in yourself.

Video

Sewing jeans at the waist, hips and legs at home.

When your favorite jeans have become large, you can resort to urgent repairs at home, all this is very simple, and most importantly - economically. You will learn about all the methods of suturing trousers from the article.

How to properly sew jeans on the sides, in the legs?

If you have lost a couple of kilograms, or you are tired of the once fashionable flared trousers, you can easily sew them in your legs. After such a home repair, you will receive fashionable skinny jeans.
To properly stitch your favorite thing in your legs, you should know certain secrets:

Put on jeans turned inside out and mark with pins a place for suturing - it will be at the very feet, but it is better to leave 1-2 cm for a margin for shrinkage after washing
Take off your pants and lay them on the table, straighten them. Trousers must lie flat so that the line does not squint.
Arm yourself with white soap and sharpen the edge of the product - you will use it to mark the places of the suture
To begin with, circle the places near the pins with soap, so the measurements will be more accurate
In the future, you will need a thread with a needle and a sewing machine, first sweep the edges of the jeans, be guided by the pin - the lines should go exactly next to the measurements
Try on battered jeans, if such preliminary stitching fits - take off your jeans and go to the final
Cut off the excess jeans that extend beyond the intended area and sew the jeans on the sewing machine
Overcast edges with overlock or zigzag

For stitching jeans in the legs, the main thing is the correct measurements.

For the first time, the procedure may seem difficult to you, so if you have expensive jeans, you should practice on some cheaper item. But when you get your hands on it well, it will be easier for you to carry out such repair work.

Video: How to sew jeans on the sides at the legs?

How to sew jeans at the waist?

There is such a situation that jeans sit like glossed on the hips, but at the waist they bulge ugly. In such a situation, minor repairs should also be carried out, which, if you have a sewing machine, can be done at home, for this:

In the case when the extra width is no more than 2-3 cm, an elastic band can save. Get a wide elastic, cut the belt from the inside out on each side of the jeans and pass the elastic along the entire length. Sew the elastic to the waistband carefully, paying particular attention to the incision
If you need to suture from 3 to 7 cm, work will be added. First, fasten the belt at the back, between the side seams
Put on jeans turned inside out and ask someone you know to pins in the darts that are in the back. The main thing is that they are located evenly from the seam in the middle.
Take off your jeans and carefully sew on the parts that have been marked.
Then iron the stitched part thoroughly.
Take the threads to match the color of the main threads and fix the dart from the outside, stitching along the entire length
Next, cut the belt, this can be done by unscrewing the middle belt loop
Attach the belt to the jeans and measure off the excess to be cut
Now you need to re-sew the already cut belt
Sew the waistband back onto the jeans and close the seam with a belt loop

There is one more way with which you can sew jeans, but it will take you more time and effort. But the result will be very high quality. You need to do the following:

Unhook the belt loop at the back and open the waistband about 10 cm on each side of the middle seam
Pull the seam that goes between the legs (it is called the step) by 10 cm
Open the middle seam, but do not unfold it, as it may shift. Just pin it gently with pins from the front
Go through all the seams from the inside and also fix with pins, after which all fasteners can be removed from the front side
Iron the seams well
Insert the legs into each other and, stepping back 2 cm from the middle seam, draw a line, forming a triangle. The drawn line should run along the waist line
Sew a line along the line and overcast the edge
Sew a crotch seam from the wrong side with one stitch, from the right side - double
Cut the belt in half and attach it to the sewn-in jeans to remove excess fabric
Sew the waistband from the right side, iron and flatten with the pants
Pin and sew gently

Important: In order for the elastic to be of the correct length, measure yourself around the waist with it and sew 3-5 cm less braid into the jeans. So by stretching the elastic will be of the desired length.

Thanks to this method, you can remove the excess part of the jeans that stood out ugly at the waist. The last option will look especially high quality, but if it seemed too complicated for you, use the rest. If done carefully, the result will definitely be of high quality.

Video: Sewing jeans at the waist

How to sew jeans one size down?

Shedding those extra pounds is certainly very uplifting, but it also causes problems with your wardrobe. If your jeans have become large, then this can be easily corrected, especially if the decrease has occurred by only one size:

The easiest way is to wash. Set the temperature in the washing machine to 95C and send the jeans to the hot wash. This process should be repeated twice, and make sure that cold water does not penetrate the jeans.
Stop the process while setting the cold rinse setting on the machine. Dry the washed trousers on a hot radiator or using a steam dryer. This method is good enough, but after a certain time the jeans may stretch again, so you will have to repeat the procedure again.
Another way is suturing. If the jeans are too big at the waist and hips, sew them in at the side. To do this, turn the jeans inside out and mark with a pin where you want to trim.
Walk along the jeans with soap, break off the pins and mark the new stitching with thread. Put your jeans back on, and if they now fit well, trim off excess fabric and sew on the pants.
If jeans are just in the hips, and there is a lot of excess fabric in the waist - it doesn't matter, sew the trousers along the seam, which is located at the back. Unfasten the belt loop and cut the waistband in the middle
On each side, you need to make darts - there you will hide excess material. Do not make very long darts, as this can lead to ugly folds in the back pocket.
When you have removed all unnecessary, sew the belt to the jeans and return the belt loop
A very simple way is to sew jeans with side seams. In these places you need to make darts, for this, open the line that goes along the side seams
Next, carefully place the excess fabric under the side seams and again stitch the jeans together. This option is suitable if you have a high-quality machine or thin jeans, since the side seams are quite tight

If the jeans have become large in size, then it is very easy to fit them for yourself thanks to the indicated methods. Do not forget about your favorite thing, everything can be fixed.
Even in the case when the trousers are large in a particular place, you can pay attention and fix this particular part of the jeans. You should not go to the workshops - there you will spend a decent amount.
At home, if you follow these recommendations, you will carry out repair work like a real seamstress. Moreover, you do such work for yourself, which means that you will definitely do everything carefully and conscientiously.

Video: How to sew jeans at the side seams?

Tips on how to sew jeans on the sides, in the waist, how to alter flared jeans.

Many people have jeans in their closets or even a few pairs that they have not worn for a long time. Perhaps the thing is out of fashion, or maybe the jeans are too big or too small. Today we will talk about the case when jeans became big. Namely, how to properly suture them.

How to sew men's and women's jeans on the sides correctly?

Important: It's worth saying right away that it is not as easy to sew jeans on your own as it might seem at first glance. If you are not confident in your abilities, it makes sense to contact the studio. Otherwise, you can simply ruin the thing.

However, if you think that your sewing machine should not just gather dust, but work, you can try. Just don't forget, this is the very case when they say "Measure seven times, cut one!".

To work you will need:

Sewing machine
Scissors
Tailor's pins
Threads
Overlock
Parser
Chalk or a bar of soap

First, try on your jeans to determine where you need to sew the product. If you need to remove excess fabric only on the sides - this is one way, and if you need, for example, to suture in the hips - there will be another technique.

We will discuss all the options one by one. Immediately, we note that women's and men's jeans are sutured in the same way.

You can often find extremely simple tips on how to quickly sew jeans on the sides. The bottom line is as follows: put on top of the old jeans a model that fits you, cut off the excess and sew. Of course, this should never be done.

Important: Sewing jeans only along the side seam will not work, it is imperative to suture both the side cut and the inner one. Otherwise, the product will be twisted.

If the jeans fit perfectly at the waist and there is a need to remove a little fabric from the sides, you can do this:

Slip on the jeans, wrong side out.
Use tailor's pins to mark the places where you need to sew, first on one leg.
Do this with the inside and outside seam.
Without ripping or cutting, take off your jeans.
Use chalk or scraps to mark the line for the stitching.
Sweep the garment by hand.
Try on jeans again, sit down, walk around.
Make sure your jeans fit properly.
Only after that you can cut off the excess 1 cm further from the future seam.
Now it's time to sew the jeans on a typewriter with threads that match the color.
Sew the finishing stitch around the outside edge of the jeans with a double thread.
Iron the jeans thoroughly.
Overlock the cut edges.

Video: How to sew jeans on the sides?

How to sew jeans in the thighs?

You can try to sew jeans only in the hips. This is appropriate when the thighs are narrow, and only in the thighs the jeans are large, and they sit normally on the legs.

Important: You can sew jeans in the hips if you need to remove no more than 4 cm. Otherwise, you will have to flog the codpiece, which is often beyond the power of a novice needlewoman.

You can sew on jeans by a few centimeters.

You can remove excess tissue on the thighs in this way:

Open the side seams.
Open the middle seam at the buttocks.
Sew taking into account the necessary preliminary measurements.
Sewing the edges must be strictly in the same style as the old seams, otherwise it will look ridiculous.

Important: It is almost impossible to sew finishing lines without experience. Therefore, we suggest that you familiarize yourself with this process by watching a video tutorial.

Video: How to sew a finishing line?

How to sew jeans on the bottom along the back seam at home?

To sew the jeans at the back seam, you will need the sewing tools listed above. Sewing jeans by hand in this place will not work.

So let's get started:

Put on your jeans first.
It is inconvenient to make basting in this part of the body on your own, ask someone to help you remove the excess and make a basting with pins.
Then you need to rip off the belt.
After that, you will have to rip the back seam, it is not difficult to rip it open.
Use a ruler to measure the same distance between the old seam and the pins on both sides.
Draw a cut line with a remnant, do not forget to leave 1 cm of allowance.
After that, sweep the seam, then try on the jeans.
If the jeans have settled well, the seam can be sewn with a typewriter.
Overcast the cut on the overlock.
On the right side, make finishing stitches.

How to taper jeans at the back seam

How to sew jeans on the pope

Now you need to properly trim the belt:

Shorten it to the desired length by cutting off the fabric on both sides.
Sew the sides of the belt together.
Then sew the belt to the jeans, make a finishing stitch.

How to sew jeans in the waist, belt?

If the jeans are large at the waist, it is best to sew them in, as described above, at the back seam. If done correctly, they will sit well on the butt.

If the jeans are large at the waist and you don't want to bother, you can narrow the waist a little in an easier way.

You will need:

Elastic
Scissors
Sewing machine
Plain pin (differently English)

Let's get to work:

Take a small piece of elastic. The length depends on how much you want to shorten the belt.
Make slits in the belt in two places (the distance between the slits is several cm longer than the elastic).
Now thread the pin through the elastic and pull it along with the elastic between the slots.
Pin to your jeans so that the end of the elastic does not "run away".
Using a sewing machine, sew two stitches at both ends.

Pull the elastic inward

How to sew jeans in a belt: before and after

Video: How to sew jeans at the waist?

How to sew, narrow flared jeans at the legs, straight into tight ones at home yourself?

Flared jeans that are not fashionable today can be narrowed and you get modern skinny ones.

Important: You should not try to make skinny jeans out of flared jeans if the flare is initially too wide. The cut is completely different, the result will not please you.

It makes sense to narrow the flare by a few centimeters (3-4 cm). In this case, arm yourself with sewing tools and get to work:

Iron the jeans and try on.
Have someone help you baste the insets and step seams with pins.
Open the folds, as well as the side and crotch seams.
Draw seam lines with a piece of soap or chalk.
Leave a centimeter of allowance.
Cut off excess fabric.
Hand sweep the seams.
Try on jeans again, walk in them, try to sit down.
If all fits, you can machine the seams.
Overlock or zigzag the edges.

Flared jeans need to be sutured from two sides

How to sew men's and women's jeans one size smaller?

Important: Jeans can be sewn in one size, maximum 2 smaller. It's easier to sew new jeans than to sew them in more than 2 sizes.

If you do take the risk, be prepared to completely reshape your jeans.

To shrink your jeans to a size smaller, put them on and look carefully where exactly they sit ugly.

Try to choose the easiest way to rework, with the minimum investment of labor and the best possible result.

There are several ways to alter jeans to a size smaller:

Cutting off the excess on the sides and the inner seam.
Alter the product along the back seam.
Remove a little in the hips only on the sides.

A few simple rules for successful jeans suturing:

Jeans, both for women and men, are altered according to the same principle.
Before starting work, wash and iron the product.
It is advisable to find an assistant (s) to help you make correct and even outlines.
Do not rush to cut off the excess, it is better to finally make sure that you are doing everything right.
Remember, there are some models that cannot be re-cut.

How to sew jeans to size

How to shrink jeans at the waist without a sewing machine?

The above tips are suitable for those with a sewing machine. If you do not have the opportunity to sew jeans on a typewriter, you can resort to other methods:

Wash the garment in water with a temperature of 90 °, the fabric will shrink for a while, however, then the jeans will become large again.
Choose a suitable belt if you need to collect it only at the waist.
Sew the elastic into the belt by hand.

In principle, it is possible to sew the pant legs by hand, but it will not look aesthetically pleasing, and the finishing lines cannot be done manually either.

Finally, I would like to say, if you are not sure of a good result, it is better to take the thing dear to you in the atelier, the professionals will do everything right. However, following the advice, you can sew on your jeans to wear your favorite item again. We hope you succeed. We suggest watching the video to better understand how to alter jeans.

Video: How to make skinny jeans?

Jeans that you like in the store are sometimes big. What if you still want to buy them? Do not under any circumstances refuse to purchase. As well as not giving up your favorite pants, which have grown large as a result of a successful diet. And there is no need to be upset in these cases either. We need something else: to shrink jeans. This can be done not only in the workshop, but also at home.

There are several ways that you can actually make your pants look smaller.

By washing

Hot water can affect your jeans and make them look smaller.

For hand washing, you will need capacious containers (basin, baby bath) and boiling water. But detergents are not useful: work is done with clean trousers.

Jeans are immersed in boiling water and kept in water for 10 to 15 minutes. In another container (you can go to the bath). From boiling water, a thing is immediately immersed in cold water for 2-3 minutes. Now it remains to squeeze, dry and iron the pants using steam.

Machine wash

When using the washing machine, you only need the washing function at the maximum temperature (95 °), no rinsing! The highest temperature is also required for drying. You can also use a hot battery.

Important! With the ability to shrink from hot water, jeans can stretch when worn. Therefore, washing can be reduced, but not more than 2 weeks.

With suturing

Washing is usually used as a temporary method. For permanent resizing, the trousers are sutured. The work is performed both completely with the entire product, and with individual parts that have become problematic.

Materials and tools that will be required when working with jeans at home

If you are constantly doing needlework, you will have all the necessary tools at your fingertips. The rest of the girls and women need to prepare the following:

threads matching the color;
needles for basting and sewing;
pins;
tape measure;
chalk or pencil;
wide elastic band;
sewing machine.

The presence of an assistant is very helpful!

How to sew jeans that are big

We will tell you how you can sew jeans in different places.

How to sew jeans at the waist. Instructions

The most common case is when the pants fit well, but are clearly large at the waist. There are several ways to fix this.

The easy way

Slip on your jeans and pint at the waist to make it shorter. You have got a kind of darts. Try to distribute them evenly, without collecting all the excess fabric in one place.

Secure the hoods with pins. After that, you need to carefully rip up the belt in the places of the darts and carefully sew them up. The fabric, which turned out to be superfluous, is cut off, after which the belt is sewn on again.

Important! Try not to do too long darts in the back, on the buttocks: this will tighten and shorten the back of the legs.

The hard way

This method will take more time, but it will please you with the result.

The work begins with stripping off the loop and label, which are located at the back. After that, you have to carefully rip off the belt (from the seam - 10 cm in each direction) and the step seam (8 cm). We carry out work with the back seam:

we fix the excess fabric with pins;
we outline and check during fitting;
if necessary, we correct, after that we perform a machine seam;
from the front side we make a double seam with a thread matching the color of the stitching.

Continuing the work, we sew up the open crotch seam and also do the topstitching. After that, we move on to the belt. Having measured how long it should be after stitching, we cut off the excess fabric, not forgetting to take into account the stitching allowances in the calculations. Sew on the shortened belt, return the back loop and the branded label to the product. Work is done!

Important! To make the product look of high quality after re-stitching, do not forget to promptly remove all old threads after stripping off and iron the seams properly after ripping the old ones and making new ones.

Reducing the size with a wide elastic band

Another way to shrink jeans at the waist will require a wide elastic band. Getting started, we pair the belt from the seamy side in the back of the trousers.

Cutting off the elastic (you need a length that is slightly less than the waist line on the back). We fasten the elastic on the belt with pins and try on the pants. If the elastic does not tighten the belt enough, adjust its length with pins. After that, we sew an elastic band, and then a belt. Your jeans will now fit perfectly around your waist. And only a small assembly will be visible on the back of the belt.

How to sew jeans in the hips. Instructions

If jeans are dangling in the hips, they are sutured in this place. First, outline how much tissue to remove. To do this, put on trousers, turned inside out and pin the excess material with pins.

Having removed the jeans, mark the seam line with chalk or pencil from the inside out. After that, the belt and pocket are stripped off, the side seam is ripped off and a new one is made. At the end, 2 decorative stitches are made from the face of the product.

How to sew jeans at the back seam. Instructions

You can remove unnecessary volumes in the buttocks area if you redo the back seam. In this case, you also have to first remove the back loop and label. The pants are then put on to mark and secure how much extra fabric needs to be sewn up.

Having taken off the jeans, a basting seam is made, and after additional fitting, a machine seam. After removing the excess fabric, the seam is processed, and stitching is done from the face. The last step is sewing on the belt, loops and labels.

How to sew jeans on the sides in the legs to change their model (from wide - narrow). Instructions

If the fashion has taken a rapid turn and recently purchased jeans clearly do not fit into it, do not immediately push them aside. When moving from wide or flared trousers to narrow ones, everything is fixable.

Algorithm of actions:

We put on the inside out jeans and mark with pins the desired width of the trousers.

Important! If flared trousers are in trouble, the jeans are narrowed below the knee, when working with wide trousers - along their entire length.

Having taken off the jeans, they make a sketch and check it during the fitting.
If the preliminary seam does not need to be adjusted, the machine is sewn.
Iron the product, and then cut off the excess material.
Processing and external stitching are performed.

Tips for reducing jeans size at home

Reducing the size of jeans yourself will require perseverance and painstaking work. The experience of experienced craftswomen will help.

Tips for stitching jeans:

Perform work on a clean, worn item. This will show how the jeans stretch as they are worn.
Stock up on time and take your time! Better to do an extra fitting to fit the pants to your figure than ruin the thing.
Do not unpick the legs completely, turning them into a skirt: not everyone is able to sew them correctly in the crotch area on their own.
Use double stitches and extra stitches at the end of a seam to improve the quality of your work.

Follow all the steps carefully and carefully, and you will succeed!

And what is your assessment of this material?