How to hem jeans with fringes. How to make fashionable, ripped shorts, skirt-shorts from old jeans with your own hands at home? How to cut jeans for shorts for women, men: ideas How to make disheveled shorts

14.10.2019

Denim is so widespread today that denim can be seen everywhere. This material differs from others in its strength and durability. That is why it happens that jeans have already gotten tired of order, but it’s a pity to throw them away, because the fabric is like new. In this case, you can turn them into a new original wardrobe item - stylish shorts.

Choosing jeans for making shorts

How to make ripped shorts out of old jeans? It would seem that it is only necessary to cut off the required number of centimeters to reduce the length of the legs. But it’s not that simple. Not all shorts will fit well after the legs are cut off. Before you cut, you need to look at the style of the jeans. It is impossible to change the cut, so if it is not suitable, then it is better to abandon the process of rebirth. Jeans that are skinny and tight will not work. You also need to avoid models that are narrow to the knee, and below go for expansion. Shorts made from tapered jeans look bad. But trousers with straight legs along the entire length are ideal for turning into ripped shorts at home. Moreover, regardless of the final length.

How to trim correctly?

First you need to decide which model of shorts should be the result of the transformation. Cutting the legs very short will create beach shorts. And to get a new thing for every day, you need to leave the length of the legs a little higher than the knee.

To facilitate the process, you first need to cut the trousers to the knee, and then arm yourself with a measuring tape and measure the required length. It is recommended to cut 15 centimeters above the knee. And if you want to have short torn shorts, you can remove 20 centimeters or more.

After determining the desired length, add two centimeters to trim the hem of the shorts. If a double tucked hem is supposed, then you need to add four centimeters on each leg. If you want to have very short shorts, the back should be slightly longer than the front. Next, you need to draw marks with chalk, remove the jeans and start shortening the trousers.

The marks applied must be connected with straight lines, along which excess material will be removed. Very sharp scissors are recommended.

The cut piece must be attached to the second leg to ensure the same leg length on the new product. Mark with chalk and use scissors to scrape off excess fabric.

Processing the bottom of the shorts

The easiest way to process the bottom of the shorts is to use an overlock. It is also possible to zigzag the hem on the sewing machine by tucking the fabric about 0.5 centimeters. You can also fold the hem of the legs in two layers and iron it out.

In order to get a stylish and original thing, it is better not to make the bottom neat. There are two options for the raw edge of denim shorts:

fringe;
torn edge.

Fringed edge

This option is not at all difficult to execute. You need to arm yourself with a sewing needle or tweezers and remove several horizontal threads from the bottom of the shorts. The more they are separated, the longer the fringe will be. It is not recommended to make the fringe length more than three centimeters. After all the excess filaments have been removed, you need to fluff up the fringe using a toothbrush. The finished edge can be folded up.

How to make torn edges?

Today this is the most stylish option for the design of the bottom of denim shorts. You don't have to work hard to achieve the result. After all, after trimming with scissors, the edge is already torn. It needs to be finalized.

How to make ripped jeans shorts? To do this, you need a blade or a clerical knife. It is necessary to make 3-4 horizontal cuts. Rub them well by hand or with sandpaper. This creates a worn-out denim effect.

Bleaching denim shorts

After the jeans have been trimmed and finished, it's time to make the new garment unique by giving it a different color. For example, you can whiten the whole shorts, but there is the option of giving a two-tone dyeing. In this case, the top of the product will remain in its original color, and the bottom will be bleached.

You can buy bleach from a sewing supply store.

For two-tone dyeing, you need to hang the item on a hanger and dip it into a container with bleach 1/3 of its length. Hold for three minutes. Then leave the shorts to dry for one hour. Then rinse in clean water and leave to dry. After the moisture has completely evaporated, the whitening will become much more noticeable.

To completely bleach or lighten your denim shorts, soak them in the bleaching solution for 2 hours. The procedure will have to be performed several times to achieve the desired shade.

Another option for creating an original look for the shorts is to spray the bleach in a random sequence and leave for the time indicated in the instructions for the product. As a result, you will get a thing with a unique two-color pattern.

After completing the staining procedure, the shorts should be washed as usual.

When handling the bleach, rubber gloves should be worn to protect the skin of the hands.
Whitening work should be done outdoors or on a balcony to avoid inhalation of toxic fumes.
Stretch jeans contain spandex, which can give an unpleasant yellow tint when bleached. Therefore, it is better not to discolor such denim.
Before starting the bleaching work, you need to carefully examine the fabric. If the light spots have a yellowish tint, there is a chance that this yellowness will not go away in the end result.
It is recommended that you first discolor the test piece that was left after cutting the jeans in order to evaluate the result.
Perfect white can only be achieved with a special fabric dye.
The stitching is not affected by the bleach agent and in most cases remains in its original color.

Creating colored shorts

For those who prefer bright colors, this color option will appeal to their liking. Fabric dyes are sold at sewing supply stores. These dyes are highly water soluble and can be easily applied to fabric with a brush. Dyeing your shorts a bold color is a bold decision. They must be bleached before dyeing. For complete discoloration, you need to leave the item in bleach for several hours. Then rinse it well, dry it and evaluate the result. Repeat the procedure if necessary.

After bleaching, the ripped jeans shorts are ready for design. Now you can show your imagination and decide whether to apply a color stencil drawing. Or the shorts are supposed to be dyed in a certain shade, completely dipping them in a dyeing solution. For full staining, 20 minutes is enough, after the thing you need to rinse and dry well.

Denim shorts dyed using the ombre effect look spectacular, when similar shades smoothly blend into each other. In this case, it is recommended to use no more than three colors.

Jewelry options

To add originality to the shorts, you can make an applique on them. It can be flowers, baby or nautical pictures on the back pocket. You can also place small images of the same theme on the bottom edge of the shorts.

Sequins, rhinestones and rivets add brightness to the outfit. You can sew single sequins by hand, and ribbons from them - using a sewing machine. Rhinestones can be glued along the seams on the sides, in several rows on the pockets or on the belt.

Another decoration option is lace.

Shorts with lace

This delicate piece of jewelry looks very stylish in tandem with rough denim.

In order to decorate the product, you need to cut triangles on the sides of the shorts, cover these cutouts with lace of the appropriate shape and sew with a needle and thread.

You can also trim pockets with this decoration.

The lace sewn on the bottom of the shorts looks original. To do this, you need to sew on the inner bottom edge of the selected tape so that it looks out about one and a half centimeters.

You can turn old, boring jeans into fashionable ripped shorts with your own hands. For this you only need imagination. You will only have to use the materials at hand. When choosing shorts in a store, it is not always possible to find an option that fits perfectly in shape, length and color. When making this thing with your own hands, you can take into account all the nuances and make your dream come true. The skills of a professional seamstress are completely unnecessary in this process. With just a little effort, you can replenish your wardrobe with stylish new shorts.

To outline future places for holes, measure jeans and place for the beginning of the place of bends, knees, end of the buttocks. When you take off your pants, these marks will help you pinpoint where the holes and scuffs should be. Mark their full circle, not just a point. If the hole is of an irregular shape, it is better to place it so that the largest diameter falls on the share thread (it stretches less). Some sewing crayons will not wash out, so a small bar of soap is the best solution.

How to tear jeans beautifully with your own hands: execution techniques

Sloppy grunge holes are easy to do.

👖In the selected place, strips of different lengths are cut parallel to each other at a distance of 5 mm.
👖 The cross threads are pulled out and removed. If some of the share threads are damaged, this will add sophistication to the trousers, but in no case will spoil them.
Ripped jeans in a minimalist style. For such trousers, you will have to outline several places with small holes. The main task is not to damage the transverse threads, but to remove part of the shared threads so that they are not very motley sticking out. Such holes are often made in the size of 2 cm by 4 cm and placed closer to the side seams of the jeans.
👖Frayed holes on trousers are used very often, especially when it comes to large diameters of holes. This is easy to achieve with a simple kitchen grater, sandpaper, or a pumice stone for your feet. The main thing in this matter is not to touch the threads that remain transverse or lobe, so that the jeans will serve for more than one month, a year, and the fringe will not break after the first wash.

How to scuff with a grater

Ordinary kitchen utensils often come to the rescue with needlework. To make the hole in your jeans look old and worn, you need a simple grater or piece of sandpaper. Tightly, along the edge of the hole, with small jerks, draw the selected tool so that the threads are fluffed up. Do the same for each edge of the denim hole. You can do the work both from the front side and from the wrong side. After that, whitewash the threads additionally with a chlorinated solution.
Please note that the reverse side of jeans often looks more original than the front side. If you have extra pieces of this fabric, try this patch over the front of your pants. You can sew on the patch with large stitches to show the threads. Such an addition will be quite appropriate for both men's and women's clothing. From pieces of other fabric, you can form a pattern (optional). Improve jeans so that they can complement both a romantic, feminine look and a sporty, daring one.

Bleached holes

To make your denim look even more stylish, try bleaching some of the threads and areas. This is most easily done with a chlorinated solution or other bleach. Regular chlorine and dissolve in a small amount of water, apply the solution to a small piece of cotton or gauze and treat the necessary places with holes. Chlorine eats into the fabric, and whiteness may not appear immediately, but after a while. Therefore, after processing, wash your jeans immediately, so the excess chemical will be removed and the holes will remain in excellent shape for a long time.

When bleaching holes on jeans, it is important to carry out all work with rubber gloves and outdoors. It is advisable to test the bleaching on a small piece of the same fabric or on an invisible part of the trousers (under the knees, on the wrong side). If you want to decorate jeans with white drops, use a pipette to apply chlorine solution to the fabric, and put a layer of cotton wool below. When the chlorine is absorbed, it needs about 1 hour to interact with the fabric, after which the clothes will need to be completely washed.

How to make shorts or breeches from regular jeans

An easy way to update old jeans is to trim them down to shorts or breeches. In this case, you need to outline the height of the future product and break it along a transverse thread. If the shorts are supposed to be without further processing, but with torn edges, then no allowances are required. They are necessary if, according to the model, a turn-up is required. For this design, add 3-7 cm to the desired length and trim off the excess. In stages, this process will look like this:

✂Without folds, lay out the finished jeans on a flat surface.
✂ Mark with chalk or pencil the place where the excess length was cut.
✂Tear off with hands or cut jeans along the line with scissors.
✂ Additionally, we make holes or scuffs (optional), given that the color of the longitudinal thread will be lighter than the main shade of the trousers.
✂ Tuck the edge or leave it torn. Ready!
Photo of beautiful ripped jeans

The question of giving new life to old jeans, making them fashionable shorts, is relevant for every girl who has at least one pair of unnecessary, worn-out trousers lying in her closet. But many have some difficulties with the design options for a new product. We bring to your attention creative ideas for creating unique women's shorts from old jeans with a unique design.

Choosing the length for the shorts

Modern women of fashion often think about how to make fashionable shorts from old jeans. The choice of the length of future shorts depends not only on our desires and preferences. In order for a new product to turn out really beautiful and original, it is necessary to take into account the shape of the jeans, as well as how tightly they fit to the body. The most common are the following types of shorts, depending on their length:

short;
classic, which are above the knees in length from 8 to 12 cm;
bermuda shorts, the length of which reaches the knee;
calf-length capri pants, slightly shorter than regular trousers.

Advice!For short shorts and capri pants, it is rational to use skinny jeans. The perfect options for classic shorts and bermudas come from both loose and tight pants.

Ripped Short Denim Shorts: Skill Lessons

Short shorts with a torn, frayed, worn-out effect are considered very original and popular in the world of women's fashion. But not every girl thinks about how to make such fashionable shorts from her old, long-forgotten jeans. After all, quite a bit of time and effort will be required to create such beauty at home with your own hands, giving a second life to lying trousers.

So, you need to start this procedure by trying on trousers. Wearing jeans, with crayons or pins, you need to make marks on them in those places where trimming is planned, for example, in the center of the thigh. The shorts conceived in this version will have a fringe at the bottom. Therefore, the cutting line must be marked 2-3 cm lower than the intended length of the finished product.

Having removed the jeans, draw lines with chalk under the ruler along which the legs will be cut off. It is advisable to draw the cut lines so that they give the shorts a V-shape at the bottom. So the product will look much more interesting and original than with direct cutting. After the jeans are prepared, they are trimmed.

manually;
in the washing machine.

The first option involves pulling the transverse fibers out of the product by hand. Less time consuming second method. You need to wash your shorts in a washing machine at a high speed. If, after the first wash, the fringe is not as lush as intended, the procedure can be repeated. Once the desired result has been achieved, the edges of both legs must be stitched to avoid further chafing during wear.

To give a worn effect, it is enough to rub them in the selected places with sandpaper or a regular kitchen cheese grater. In front of the resulting shorts, you can make slots with scissors and a clerical knife, the edges of which are also fringed. And the new ripped shorts are ready to try on!

Advice! When creating ripped shorts, it is important to remember that when worn and as a result of washing, the holes will increase in size. Therefore, the slots should not be very large.

DIY fashion ombre shorts

One of the trends today is gradient coloring, or the so-called ombre. This technique has gained wide popularity in the choice of color solutions for clothes. We propose to consider the process of how to make interesting options for fashionable women's shorts in this style from discarded old jeans.

First, you need to cut your old jeans to the required length, using the rules that were outlined earlier. After that, you can safely start dyeing the shorts.

For this, special acrylic paints for fabric will be used. If it is dry paint, you should carefully study the instructions for it and dilute it with water in the right proportion.

It is worth highlighting two basic methods of gradient coloring of the product:

using paint of the same color;
using paints of different colors.

If we make a gradient coloring of the shorts with paint of the same color, then first we dilute a small amount of it in water so that the color of the liquid is not very saturated. Then we place most of the product in a container with water for five minutes. Then we take out the shorts and dilute the remaining dye in the same water. In the liquid, which acquires a darker color, we again lower the product for five minutes. But now for a shorter length than the previous time. The second line on the shorts will turn out brighter and darker.

To perform a gradient painting using several colors, paints must be applied alternately to both sides of the product, and colors must be mixed at the borders to create a smooth transition.

Advice! In order to get a smooth transition between shades of one when mixing paints, the paints must belong to a consistent palette. If a smooth transition is not planned, you can use a variety of colors.

For art lovers

It's a pretty good idea to give old jeans a new lease on life and turn them into trendy shorts, adorned with delicate designs. Drawings are created using fabric paints, as well as one of the following means:

stencils;
brushes;
lace.

The technique of creating patterns on a product using stencils is simple and straightforward. To do this, cut the selected drawings on a sheet of cardboard, and then, applying it in the right places on the canvas of the product, apply paint with brushes or a sponge in the cutouts. Ordinary lace can be used as stencils.

There is also another, no less interesting way to form a pattern on shorts using lace elements. To do this, the lace must be soaked in a solution of whiteness and applied to the product for half an hour. Due to the fading of the fabric under the influence of the bleach, the lace pattern will appear on the shorts.

And the most creative way to create designs on denim shorts is by hand drawing directly. To do this, initially the drawing is applied with chalk to the product, and then painted with special paints.

Advice! Acrylic paints can be replaced with felt-tip pens on the fabric, since they are much more convenient for painting small elements.

Trendy "star" shorts from old jeans

An interesting way to create bright, ultra-fashionable shorts from old denim trousers is to apply chaotic and shapeless blots, the composition of which creates the visual effect of starry space.

This design should be used on dark denim jeans. For its registration you need:

multi-colored acrylic paints on fabrics;
aqueous solution of whiteness.

This colorful decor is beneficial in that it allows for a wide range of imagination and creativity.

Once the jeans are at the desired length, the creative process begins. It is most rational to paint on the floor, covering it with a film or other coating that does not allow paint to pass through.

First, using a spray, the shorts are sprayed with whiteness diluted in water, randomly, in different places. Spraying with this solution should not be done very liberally. After faded, faded purple spots appear on black denim, you can spray them with whiteness again to further “eat away” the color.

Cut to the outline and the chic shorts are ready!

Then you need to go to the direct work with paints. They can be mixed with each other to obtain a variety of shades, or you can use pure colors. The sponge should be dipped in the paint and applied around the faded blotches that already exist on the shorts. Periodically applied colors need to be changed.

You can use a toothbrush to create stars on the "space" denim. To do this, the brush is immersed in white paint, and then by spraying paint with a finger from the bristles, small numerous specks-dots are created. Individual parts of the shorts can also be highlighted in more intense white.

After completely dry, the shorts are turned over and decorated in the same way. You can create a "star" decor only on the front. For fixing the paints and final drying, the product should be left for at least a day.

Advice! It is best to use an aqueous solution of whiteness (1: 2) to avoid corroding the fibers of the fabric and creating holes.

Original shorts with lace decoration

Shorts decorated with lace inserts have a very graceful and feminine look. This decoration technique also belongs to the category of simple and low-cost in time. You do not need to be a skilled craftsman in the field of cutting and sewing to sew small pieces of lace from the main fabric of the product.

There are many options for decorating denim shorts with lace elements. Among the most popular are the following:

lace decor along the bottom edge;
addition of denim shorts with a lace strap;
side lace inserts - external and internal;
lace patches on the pockets;
lace patch on the entire product (front, back, on one side, on both - a flight of imagination).

As an example, consider how to decorate trendy shorts made from old jeans with lace on the sides:

To do this, you need to take thin sewing threads of the appropriate tone, a needle, and, accordingly, cotton ribbon lace.
First you need to prepare your jeans - cut them to the intended length. Both short and classic shorts and bermuda and capri shorts look original with lace decor.
Then the side seams of the new shorts are steamed to the desired length, a wedge is cut from the main fabric of the product. It is also necessary to cut a similar wedge of the appropriate size from the selected lace. Using pins, pin the lace wedge from the outside to the side seams of the shorts.
Be sure not to be too lazy to try on the product to make sure that it does not shrink on the sides. After that, sew the lace with neat stitches that are invisible from the front side or stitch it on. We get the original design of summer shorts.
In the same way, the lace wedge on the side can be applied from the seamy side. In this case, the edges of the denim fabric, which will overlap the lace, can be either stitched or decorated with a light fringe.

Advice! It is better to give preference to pastel lace colors (for example, white, beige, peach) and avoid bright decor so as not to overload the appearance of the product.

Chic Shiny Sequin Shorts

Decorating with these elements can also be done in different ways:

decoration of individual elements of shorts (pockets, belt, cuffs, lapels, etc.);
decor of the main cloth of the fabric (single elements, all over the cloth, back, front, on one side, etc.).

We offer you to study step by step the process of decorating a product with sequins to create a special glamorous look.

After the old jeans have been cut to the required length, we proceed to decorate the new product. To this end, you need to purchase the required amount of jewelry and decide in advance how to distribute them among the shorts.

The sequin sewing process is not a quick one. It requires special attention, concentration and a significant investment of time. But on the other hand, the effect obtained as a result is worth it.

Sequins can be rolled and piece. With rolls, the situation is a little easier, since they are machine-sewn. It is more rational to use such sequins to decorate a large area of denim.

For this method, it is better to choose a special shiny fabric and sew on the shorts.

Make a pattern on paper Awesome finished product

If the decor of the shorts is moderate, you can use piece sequins. They are sewn by hand. The sequin must be put on the canvas, from the inside out, stretch a needle and thread into its center and pull it out on the front side. The needle should then be pulled inside out near the edge. Then the procedure is repeated, only now the needle and thread are brought out inside out at the other edge of the sequin.

Advice! It is not recommended to use intense sequin decor for stretch jeans shorts. Since this type of fabric is elastic and has a tendency to stretch, it can rupture tight seams and shedding sequins.

Thus, it is not at all necessary to throw away your old, worn out jeans. It is much more interesting to give them a second chance to exist - in the form of original fashionable shorts. The new product will delight both you and those around you, first of all, by the fact that it will significantly stand out among the clothes of other girls - after all, you can hardly find an exact copy of the design you have created with your own hands anywhere else.

Quite often it happens that we buy new things simply because they fit perfectly on the figure, because this is incredibly important, but at the same time they look boring enough outwardly. But this problem is easy to solve, for example, you can create a beautiful decorative element with your own hands or even slightly alter the thing. Here, for example, you had the opportunity to buy inexpensive fashionable and high-quality jeans, but for you they are overly simple and do not stand out in any way. What to do? Of course, take it, because the situation is very easy to fix. Now we will learn how to make a fringe on jeans, which will significantly change their appearance, and maybe even radically transform. Everything is really as easy as shelling pears. The main thing is to decide how you will decorate your new thing.

What materials are needed to make a fringe?

So you've decided to spruce up your brand new denim shorts or pants? Where to begin? How to make a fringe on your shorts without leaving your home?

The decor itself can be purchased ready-made in a sewing accessories salon, or you can make it yourself. A lot also depends on whether you have any skills and experience in working with fabrics, and most importantly - the right mood. It is also important to decide on the style in which you want to style your shorts.

Important! If you, besides the fringe, plan to decorate them with holes, then everything is very simple here. If there is no natural ventilation in the form of holes in them, then it is better to purchase a ready-made fringe.

So, to make it yourself, prepare a suitable color of thread, scissors, a thin hook and a needle. It also doesn't hurt if you always have a simple pencil and a piece of sandpaper at hand.

Stages of making a fringe on the bottom of clothes

You already have all the necessary tools and materials, which means you can get to work. Moreover, this procedure will take you quite a bit of time. Here is a detailed instruction on how to make fringes on jeans underneath or shorts in a classic style, step by step:

Cut your jeans along a pre-measured line. Do not tuck the bottom right away, but rub the edge with sandpaper. Thanks to this procedure, you can artificially age the fabric and make small scuffs.
Now, using a crochet hook, pull out the white threads from the base. As a result, you will only have black or blue fringes, it all depends on the color of the material itself.

Important! The length and size of the fringe depends on how many threads you pull from the warp.

If you are not a fan of the classics, then you can try to make a more extravagant fringe. It will turn out to be unusual and stylish. We do it like this:

Mark the cutting line with a simple pencil to indicate the main length of the product.
Add another 20 cm to this line, draw another line across the leg.
Cut the jeans along the second line.
Use scissors to make several vertical cuts between the drawn lines.

As a result, you will have a fringe from the fabric with a width of 1-1.5 cm.

How to make your own fringe on your pockets?

The fringe sewn at the bottom is not to everyone's liking. Many people prefer shorts and jeans with fringed side seams and pockets. The resulting products are quite unusual, stylish and attracting the attention of passers-by:

In order to decorate your pants in the pocket area in such an original way, you need to purchase a braid or a fringed ribbon at a sewing store. And keep in mind that in color it should ideally match the product, or, on the contrary, sharply contrast with it. It is attached to the top edge of the pockets in one or more layers - everything depends on you.
Another option is to simply dissolve the product from the side right along the seam, carefully insert the braid into the seam and stitch. As a result of doing such simple manipulations, you will get just chic and fashionable shorts.

Video

As you can see, the work does not take much time, does not require serious additional financial costs, and the result is simply amazing. Agree, only brave and creative girls can afford to wear something like this!

Make your own trendy jeans shorts. The article provides instructions on how to do this quickly and easily.

A modern fashionista needs new clothes every season. But it can be so lazy to go shopping or there is simply not enough time, so girls and women begin to tinker on their own.

You can make trendy shorts from old jeans. Summer is already in full swing, and if you are already tired of denim pants or their style or colors are out of fashion, then spend some free time to create a masterpiece.
But the most interesting thing is that you need to be able to cut your pants correctly the first time to get beautiful shorts.
This is not easy to do, but our tips will help you cope with this task quickly and easily. Read the article and you will find out everything.

First, you need to try on the old jeans that you chose to cut for the shorts. They should fit well on your hips, and remember that wide jeans will make wide shorts, and tight pants will make tight shorts. Therefore, if your jeans fit well, then get to work. So how to cut jeans for shorts correctly and evenly? Advice:

Wash your jeans first, dry and iron with a hot iron.
Now put them on and mark the length down to your knees. Peel off and cut along the marks. The result is elongated knee-length shorts. This makes it easier to cut your shorts to the desired length.
Now think carefully about how long you want the shorts., because if you cut the pants incorrectly, then you will not be able to return them back.
Classic shorts 10 cm above the knee. Almost any jeans are suitable for them: tight, loose, with holes and frayed knees.
Short shorts can be either just below the thigh line or above. They are great for the beach. Short shorts should not be made with wide jeans, as the end result will be a product that will expose your thighs too much.

Then do the following:

Put on cropped shorts and using a simple pencil, chalk, or soap, outline the length you want to be on the outside and inside of your thigh.
Take off your shorts, lay on a flat surface, straighten.
Use a ruler to draw a line from the marks that you did.
Now cut one leg... Then you can attach the trimmed part to the second leg and mark its length accordingly. Cut along the line. You can also fold the shorts in half along the midline, straighten, flatten with your hands, and draw a line along the cropped leg on the one that is still intact.

Remember: If you want to add fringe, the jeans will appear even shorter. Therefore, you need to leave an additional 2 cm in the length - below your final length. If you want to make a fold along the edge, then you will have to cut it 5-7 cm below the desired length.

Do not panic if the cut line is uneven - the fringe or fold will fix everything. Try on shorts and make sure the length suits. If they seem long, then cut as many as necessary. Now it's time for the decor:

Small classic fringe can be done by simply washing the shorts in the washing machine.
If you need a long fringe, then you will have to shag it with a gypsy needle or a nail file. Get ready to take the time, because denim is a dense fabric and it takes some effort to create fringe.
The scuffs can be done using a regular iron vegetable grater or coarse sandpaper.
Lace or other braid will look beautiful along the cut line.... It is also fashionable this year to decorate shorts with beads, sequins or embroidery.
Patterns using whiteness will add originality to the shorts... Dilute this bleach 1: 1 with water and sprinkle it in different places. It will turn out stylish and interesting.

Video: DIY: How to make ripped shorts?

Men's shorts are easier to make than women's shorts, as their length should be good - up to the knees or even just below the knees.

How to cut jeans for men's shorts? Instructions:

Wash your jeans to make them shrink. Dry and iron the garment.
Let the man put on jeans, and you outline the required length. If you will be making an edge or bend, then measure down 5-7 cm of the final length.
Lay jeans on the table and from the marks made, draw a line on one leg. Cut off.
Then fold the product in half in the middle. and draw a line on the second leg. Cut off.
The shorts are almost ready, all that remains is to sew the hem or make a fold... To create an hem, first baste with threads and then sew. To create a fold, do the following: bend the cutting line inward 2 times, iron and tack by hand or on a sewing machine along the side seams.

The shorts are ready and ready to be worn. Additionally, you can make the decor: pat with a vegetable grater or add light spots with whiteness.

Video: How to make shorts out of jeans video? Jeans turn ...

If you do not like shorts that are too short, then you can make shorts from old jeans 5-8 cm below the thigh line, and make cutouts on the legs to the pockets themselves. It will turn out original and stylish, you will not be hot in summer in such shorts. You will always be in the spotlight with this garment, as cropped shorts with holes and fringes are at the peak of popularity this season.

So, we cut jeans for women's shorts, as in the photo above. Instructions:

Wash jeans, dry and iron. Slip it over yourself and use chalk to mark the length you need.
Remove jeans and lay them out on a flat surface. Draw a line under the ruler from one mark to another, and cut off the excess.
Then start cutting holes. First, draw a line with a simple pencil at a height of 2-3 cm from the cut off part of the shorts. It can be as long as you like. Make a cut with a fabric knife or sharp blade. But put something hard, such as a cutting board, under the leg inside the shorts, so as not to accidentally cut through the back leg.
Mark the second hole at a height of 2 cm from the first. It will be 1-1.5 cm shorter. Make it the same as the first one.
After 2 cm, make a third and fourth hole. They will be 2-3 cm shorter than the second.
Use a needle to fringe the bottom of the legs. Do not cut the threads that will come out. Use any sharp object to pat the holes as well. The shorts are ready and ready to be worn.

Any shorts can be made using this method:

The bottom is trimmed with a zigzag, and a sticker with embroidery is sewn on the front- fashionable and original.

Stylish shorts, trimmed with braid, beads and other decor. Perfect for a variety of wardrobe for both 12-year-old girls and adult girls.

Fashionable ombre shorts can be made using acrylic paints on the fabric. First, do one color - dilute the paint in water, lower the finished shorts for 5 minutes. Then darken the color and lower the shorts to the desired mark again for 5 minutes. Continue this way until you achieve the desired effect.

Super short shorts with folds and holes in the hip pockets.

Children grow quickly and therefore their clothes become small after only one season of wearing. But things can be given a second life, like cutting jeans and turning them into shorts. Think about the length in advance:

Capri- slightly shorter than regular jeans.
Breeches- up to the knees or slightly shorter.
Short shorts for children, like adults, below the thigh line.

How to cut jeans for kids shorts? Instructions:

Jeans must be washed, dried and ironed. Put them on your child and mark the length with chalk or soap.
Lay out the pants on the table, draw a line and cut off one leg first, then, by analogy with cutting adult pants, cut off the second leg. If you want to fold the edges, then leave another length for the fold - 2-3 cm.
When the shorts are ready, decorate them with embroidery, guipure, metal fittings or large beads.

Your daughter will love to wear these shorts! They will become a favorite item in her wardrobe.

Tousled shorts are best made elongated. Holes and disheveled elements will be clearly visible on them. Short shorts have little room for this kind of trimming, and such a product can turn out to be too provocative. How to make trendy tousled shorts out of jeans? Instructions:

Get your jeans ready for cutting: Wash and iron with a hot iron.
Slip the jeans over and mark the length- 10-15 cm above the knee.
Take off your pants, lay out on the table and cut along the marked lines.
Now make a fringe down the bottom with a knife or large needle.
Then, after 2 cm from the fringe, make cuts with a sharp special knife or with a blade at a distance of 0.5 cm from each other. It is not necessary to make straight lines or the same length, the more disordered they are drawn, the more beautiful it will turn out in the end.
Keep the lines short on the hips... They end at a distance of 3-5 cm from the line of pockets.
Now all these cuts need to be tousled with a knife... Cut the formed long threads with scissors. The shorts are ready!

Important: Remember to place a cutting board inside your legs to avoid cutting the back of your legs.

Tear - do not sew! Making ripped shorts is easy. First you need to prepare your jeans as described above. They should be clean and ironed. Then you need to cut the legs to the required length. Now we do everything according to the instructions below.

How to make ripped jeans shorts? Manufacturing steps:

At a distance of 2 cm from the edge, make an incision 10-12 cm long... It should be approximately 2 cm from the side seam and 10 cm from the inside seam. Pull this incision well several times in different directions, pat it with a knife or needle.
Then, at any distance, in a chaotic manner, make several small cuts to the right and left of the lightning. They can be located asymmetrically in relation to each other, the more messy, the more fashionable and more beautiful.
Pat every hole to create the impression that these shorts have been worn for a dozen years.... If the holes are too narrow, make them rounder with scissors.
When the shorts are ready, you can paint or decorate them with any elements.: beads, metal fittings.

Nowadays, clothes that look like they were worn by several people are in fashion. So don't be afraid to rip your shorts too much or do something wrong. They will still be fashionable and stylish.

A skirt made of old jeans can be either a simple model or the most unusual, it all depends on your imagination. How to make a skirt shorts from jeans?

You need to complete the following steps:

Prepare your jeans, they must be clean and ironed.
Measure the length of the future skirt and cut the legs. Leave 1.5-2 cm per edge.
Hem the pant leg. The shorts are ready. Now you need to sew an element to them that will turn the shorts into a skirt-shorts.

Pattern the front of the skirt on paper. You can tie two pencils together to make a seam allowance right away, or you can draw an additional line afterward.

The size of the pattern is equal to the size of the shorts in the front plus 1.5 cm for the seams. Next, do the following:

When the pattern is ready on paper, transfer it to the fabric.
Rip the remaining pant legs at the seams. This will be the fabric for the skirt element.
Cut out a pattern, sew on three sides.
Sew the side into the shorts, but first open the seam on them. Then sew part of the skirt to the pocket and just below the belt line, as in the photo.
Sew a zipper to the side of the part of the skirt that will serve as a wrap.... Also sew the zipper on the other side of the shorts.

Advice: In order not to decorate the skirt in front with a seam, thanks to which it is clear that this is a skirt-shorts, you can use second jeans, from which it is easy to cut out the front of the skirt. If you do not have second unnecessary jeans, then you will have to pick up the threads and make a decorative stitch.

If you find it difficult to create such a smell on shorts, then try to start with just a straight line on the buttons, as in the picture below. In any case, a wrap skirt-shorts will turn out beautiful and stylish.

Feel free to experiment. Even if you ruin the first jeans, the second will definitely make a fashionable thing. Moreover, the jeans are old and it is not a pity to throw them away. Good luck creating some real designer pieces!