Champagne for March 8 with your own hands. Original design of a bottle of champagne. Photo of champagne bottle decoration
Spring needlework is gaining momentum. The days are getting longer and the mood is getting better. Let's get down to spring decoupage, decorate a bottle of champagne for March 8th.
First of all, the labels are removed from the bottle. Soak it in a bowl of water, then the paper will peel off easily. Then, wipe the glass with any degreaser (alcohol or acetone).
For spring decoupage, you need to choose a pattern that matches your mood. A napkin with small bouquets of lilies of the valley will be very relevant. It is necessary to remove the top layer of the napkin, only it will be used for decoupage.
We paint the bottle with white paint using a special foam rubber sponge.
Apply two coats of white paint to completely cover the surface. This layer of paint is the main one and the following stages of decoupage will be applied to it.
While the paint dries out of the napkin, you need to tear out a few small fragments of lilies of the valley.
Apply the fragment to the white surface of the bottle and coat with special decoupage glue on top. He will soak a thin napkin and stick it. Smear the glue with a small brush and smooth the napkin so that wrinkles do not appear.
After the decoupage glue dries, you can paint on the background of the bottle. Lilies of the valley were painted on a complex background in yellow-green hues, so we use acrylic paints for painting: white, yellow and bright green. Mix paints to make tones similar to the color of a napkin.
With a small foam sponge, apply on the bottle, between the bunches of lilies of the valley, at first a light yellow color.
Then, with a green tint, draw shadows around the lilies of the valley (the location of the shadows should match the napkin pattern).
When the background painting is dry, varnish the entire decoupage with several layers of acrylic varnish.
If there are some wrinkles on the glued fragments, sand them with sandpaper.
To make decoupage "Silver Lily of the Valley" you need to use silver glitter. Apply small dots of glitter to each lily of the valley bell and wait for it to dry.
On top of the silver bells, apply a transparent gel contour. After it dries, the bells will become voluminous and shiny from the inside.
You can also varnish a bottle of champagne in several layers. However, make sure that the varnish does not level the surface. Small bells of a silvery lily of the valley should stand out on the bottle by volume.
Tie a satin bow around the neck of the bottle to match the color of the painting.
And a bright, spring mood is provided to you. Decoupage of champagne for March 8 "Silver Lily of the Valley" is ready. To decorate another bottle, you can use
Publication date: 27.03.2016 18:29:00
We invite you to familiarize yourself with the various ways of decorating, which will give you the opportunity to make your own decoupage bottles. A simple glass container for alcoholic beverages, any vases, jars will turn into true works of art in your hands.
The theme of the master class is do-it-yourself step-by-step decoupage on glass using different materials in different styles. And in order to make it easier to understand this video master class, we have provided you with 3 video lessons and 60 photos. Decorate the bottles with your own hands, and we will help you. 
Decoupage of bottles for March 8 and for a wedding
At any festive table, it doesn’t matter whether it is March 8 or an even more serious event, such as a wedding,
open champagne. Here you can connect fantasy to work and decoupage bottles using appropriate thematic plots. This is a technique in which a suitable picture is pasted onto a particular surface. First, select the desired image. In this case, you can use a plot on a napkin, rice paper or a card. Floral arrangements, some floral patterns, as well as interesting ornaments are well suited for the celebration of March 8. Such images are good for decoupage of a bottle of champagne for a wedding, especially if you add some decorative details to the finished product. Such work is done quite easily with your own hands.
It is necessary to degrease the surface, and then primed with light acrylic paint. After the fragment is glued to the selected areas, fixed with acrylic varnish. This method is an easy option for beginners who decide to decoupage on glass, and indeed, are interested in this technique. This is how the base coat of a bottle of champagne is made for a wedding, March 8, etc.
Experienced needlewomen use craquelure as a decoration to give the product a retro touch. We bring to your attention a photo for inspiration, which shows the decoupage of champagne bottles, especially for March 8 or for a wedding.
Decoupage on glass with your own hands
Decoupage on glass is a common option for beginner needlewomen, which makes it possible to get excellent products to decorate the interior with taste and ease. With its help, ordinary glass is transformed into original objects of art.There are a variety of ways that are proposed in this issue. There are mainly reverse and direct decoupage on glass. We have an interesting article on our website, accompanied by relevant video tutorials. Our instruction will help to evaluate, as well as to study the intricacies of the work. You can try to make decoupage on a glass vase.
Video step-by-step decoupage master class on glass
DIY vase decor
Let's move on to another decor option, where you will learn how to decoupage a vase. Many in the house have vases with a clean glass surface. Try to repeat the presented glass decoupage object for flower arrangements will sparkle with new colors.Decoupage of a vase begins with the preparation of the surface, by degreasing it. For these purposes, you can use acetone. After that, the product is painted with white acrylic paint. It is convenient to apply paint with a foam rubber sponge.
This master class suggests applying an uneven layer of paint. Apply more layers on the upper and lower parts, since the selected floral motifs will be glued here. On step-by-step photos, you can see how the decoupage technique looks like on a vase.
On the dried item, glue the prepared pictures, as in the photo.
As an additional decor, you can use an interesting technique by using a thread for this purpose. To do this, pieces of thread of 20 cm are wetted first in water, and then in PVA glue.
After that, with your own hands, form elements of a spiral shape on the surface of the object. After filling the space as you wish, leave the product to dry. Then, coat it with several layers of acrylic based varnish, drying each one in between. This completes the master class and decoupage of the vase. Let's admire the wonderful result presented in the photo.
To create decoupage, various auxiliary methods and techniques are sometimes used. The next master class will show you the idea, which is based on voluminous decoupage with eggshells. The prepared bottle is degreased, after which it is coated with white acrylic paint. Further, a small piece of paper with a rice texture is glued onto a dried object.
The next step is to cover the bottle with an egg shell, which must first be cleaned of the film.
Now, prepared fragments from a napkin are glued onto the volumetric decor with eggshells.
The very surface of the egg crackle is tinted with light paint, and the contours of the rice material are pink. In some areas between the eggshells, you can paint some details with your own hands, as in the photo. To tint cracks, you can use crushed crayons. Finally, the resulting volumetric decoupage is coated with acrylic-based varnish in several layers.
In addition to the interesting eggshell decor, another interesting option with which to decorate 
products, is a voluminous decoupage of bottles with a cloth, as well as tights. Before considering the master class, consider the list of materials and fixtures that will be useful to you for work.
So get ready:
Let's consider the first option. This will be decoupage of bottles with napkins using a partial decor with a cloth. Take the prepared bottle and rid it of all kinds of paper stickers. They are easily removed with warm water. Then degrease the surface.
Now decoupage with napkins in the center. Next, apply an acrylic-based varnish. Leave the bottle to dry. At this point, prepare a solution that will help you soak the fabric. Take a small amount of putty, glue and water (in a ratio of one to one). You will also need light-colored acrylic paint. The color of the paint is selected to match the selected fabric.
The amount of fabric needed is determined by the possibility of turning one half of the bottle. The prepared piece of material is dipped into the adhesive solution, thoroughly impregnated and squeezed out of excess. After that, wrap the bottle with your own hands, draping the fabric at your own discretion or as shown in the photo.
Let the created decor dry thoroughly during the day. At the final stage, use glue to fix various decorative elements with glue and apply varnish to the bottle to secure the created work.
In addition, you can do a complete decoupage with a cloth. To do this, the selected matter is washed and dried.
Further, the fabric is cut into separate shreds, moistened in a solution, the composition of which is presented above, and each of them is successively glued onto the surface of the product. Carefully straighten each of the segments with your own hands, forming folds on them.
The finished volumetric decoupage using fabric is varnished as usual. Decoupage with tights is done in a similar way. But in this case, it is much easier to work with this material, since such a fabric is much easier to drape and can dry quickly. Therefore, you will not spend a lot of time on such decor.
Oddly enough, decoupage can also be done with toilet paper. Since the main topic of our article 
are the glass surfaces of the bottles, let's take a look at another master class with step-by-step photos, as well as a video on decor in marine power. For work you will need:
Prepare the surface: remove the labels, degrease, dry. From the napkin we cut out the necessary fragments for decoupage and separate the top color layer. PVA glue is diluted with water in a ratio of one to one. Now, cover the bottle with toilet paper using glue. An interesting texture on the surface is obtained due to folds. Apply white paint over the glued paper. Glue the pictures prepared from the napkin onto the acrylic varnish in the center and on the lid.
Next, a layer of blue paint is applied over the dried product, and then with a sponge, with a golden hue, they pass through the folds. From the remaining parts of the napkin, form bundles and paint over them with a golden tone. The resulting parts can be used as bottle decor, as shown in the photo. The final touch is the coating of the finished decorative bottle with two layers of acrylic varnish.
Video: Decor on a bottle with a marine story
The craquelure technique is used to give products an aged look with characteristic cracks. In retro style, making decoupage is quite simple even for beginners, if you study a master class with photo examples before that.
Required decor kit:
The product degreased with acetone is covered with dark acrylic paint. You can use a hair dryer to speed up drying. To make craquelure, take a special varnish, apply it to the bottle and wait until it dries for at least 15 minutes. Now, mix the colors to get the shade you need.
The presented master class uses a golden tone, which is formed by mixing yellow, brown and white colors. Dried craquelure gives original cracks on the bottle.
Previously prepared pictures are glued in the desired area, after which the main background is tinted in gold. In order to give the desired three-dimensional appearance to the applied images.
All fragments of the images are outlined with a contour to match the main golden background, and at the end the craquelure with decoupage is covered with acrylic varnish. Next, we suggest that you study the final master class on a video example on decorating cans using decoupage technique. Any hostess can use this inventory by filling it with a variety of bulk products in the kitchen.
Video master class decorate glass jars
For decoupage of bottles by March 8, it is better to use pictures with floral patterns - they will symbolize the spring women's holiday. Floral designs in delicate pastel colors are ideal.
a bottle of champagne or wine (or another bottle that you decide to decorate);
napkin with a pattern for decoupage;
acrylic paints;
tassel;
economic sponge;
PVA glue;
acrylic lacquer;
sandpaper (fine-grained);
alkyd varnish.
Progress
1. Before you decoupage the bottle by March 8, you need to prepare it: remove all labels from the glass and immerse the bottle in a container of warm water for about 30 minutes.
2. Remove the bottle from the water and let it dry.
3. Paint the bottle with 2 coats of acrylic paint. Wait for the 1st coat to dry before applying the 2nd coat of paint. For ease of application, use a brush or sponge. If you want to get an even border between the painted and unpainted part, use tape.
4. After the paint on the bottle is completely dry, you can proceed directly to decoupage.
5. Take a napkin and separate the topmost layer with a pattern.
6. Carefully cut out the desired motifs from the napkin or simply adjust its size to fit the bottle.
7. Using a mixture of PVA glue and water, carefully glue the napkin fragments to the bottle. Use a synthetic bristle brush for this.
8. Once the glue on the bottle is dry, apply a thin coat of acrylic lacquer. If creases or irregularities remain on the surface, gently rub them with a piece of sandpaper and again cover with a thin layer of varnish.
9. If necessary, give the general background on the bottle the desired shade. Mix acrylic paints on the palette and use a sponge to apply them in a thin layer. The motifs on the bottle can also be drawn with paints and a brush to make them look brighter. After complete drying, be sure to apply a thin layer of acrylic varnish.
10. Decoupage of the bottle by March 8 is almost ready. It remains only to cover the drawing with a thin layer of alkyd varnish. It will help to preserve the beauty of the pattern on the bottle for a long time.
If desired, you can decorate the neck of the bottle. You can carefully wrap it with satin ribbons to match the motif on the bottle and glue beautiful beads. Or attach an artificial flower to the neck to match the pattern (it can be made from felt, organza and embroidered with sequins or beads).
If you, like Winnie the Pooh, have only an empty pot (or your girlfriend does not like alcohol), he will do the same. From an empty decoupage bottle by March 8, you can make a pretty vase for a large single flower.
This bottle does not need a primer, which means that the work will be completed in half the time
Such a decoupage of bottles by March 8 will allow make your gift memorable and unusual and will be excellent.
We will try to decorate with you a bottle of champagne as a gift for mom, for example, on March 8th. The bottle can be wrapped beautifully with a cloth, screwed on paper flowers, or decorated with decoupage. For example, a napkin with a huge flowerpot of tulips is a good illustration for a gift for any holiday. 
We tear off ¼ part from the napkin and remove only the top layer with the bouquet. 
Wash the bottle thoroughly and wipe it with acetone. 
We color the champagne with white acrylic paint. If you work with a brush, there will definitely be stripes on the glass, so I suggest using a foam rubber sponge or a piece of ordinary washcloth. 
If you are not sure about the quality of the napkin, you can protect yourself and spray the torn fragment with hairspray. Usually, varnish makes the paper a little thicker and prevents the pattern from bleeding. 
We will do decoupage using the file method. Thanks to him, the napkin will stick without wrinkles, which is especially important for large fragments. We put the torn drawing, image down, on the file. Pour about 20 ml of water on it (maybe more), you need the napkin to float in a puddle of water. We smooth the paper with our fingers, right in the water, do not be afraid, it will not tear. 
When all the folds and wrinkles are leveled, drain the water from the file by lifting it over the edge. 
Turn the file over and attach it to the bottle so that the napkin fits snugly on the painted surface. 
Wrap the file tightly around the bottle, using your hand to squeeze out air bubbles and excess water. 
Gently by the tip, begin to lift the edge of the file so that the napkin remains on the bottle. The file is removed, and the wet wipe lies flat on the surface, without a single wrinkle. 
Now coat on a wet napkin top with acrylic varnish. Since the napkin may fall off after the water dries, the varnish will stick it securely. 
After the varnish has dried, you will see that your fragment is glued perfectly evenly. Choose the paint that would suit this decoupage gift for mom. This napkin needs a gray background, because there was also gray around the tulips. Mix white acrylic with silver to create a shimmery gray, and use a foam sponge to spread the paint all over the champagne. Slightly cover the edges of the glued napkin with paint so that the composition “blends” into the background. 
To finish decorating the champagne, spray it. Choose the right colors of acrylic paints: silver, red, lilac. 
First spray with pure silver. Dip your toothbrush into the paint and run your finger along the bristles to get drops onto the bottle. Gray goes well with pink, so you can mix red and lilac for a cool lilac-pink color and make a second layer of spray. 
You should get drops of different diameters and shapes, but the combination of tones in this case will be perfect. 
Since the glued fragment of the napkin does not look like a picture, but a real photograph, you should not do a painting, so as not to spoil the classic decoupage. I allowed myself to make a voluminous bow that was tied around the bouquet and circled it with pink glitter. I also put shiny dots around the foil to ennoble this line. 
Most importantly, do not forget to apply several layers of acrylic varnish on decoupage after all the paints have dried. 
Champagne for March 8 is ready for mom. Although it does not matter for what holiday it is made, the main thing is that with love.
And if you liked this technique of making souvenirs, then you should look how to make
A gift for March 8 to your beloved mother, sister, girlfriend does not have to be bought in the store. You can make such neat and high-quality handmade that not a single expensive knick-knack can be compared with it in beauty, and this little thing will be the least reminiscent of a children's craft. Bottle decor by March 8 is becoming a common type of needlework. Wine or champagne is considered the standard gift that comes with a bouquet of flowers. So, why not make it an original author's decoration, which is not a shame to put in a prominent place in the room? Working with glass is quite simple: it is enough to clean and degrease it. Let's consider several detailed master classes on decorating bottles, after which it will be difficult to recognize ordinary containers.
Candy bottle decoration
One of the easiest and most popular options for decorating bottles with candy is making a decorative pineapple. For work you will need:
- Candies.
- Glue gun.
- Green crepe paper for leaves.
- Green satin ribbon.
- Scissors.
For an exotic fruit, any round-shaped sweets are suitable. To stylize a pineapple for the holiday, it is enough to choose candies with wrappers in two colors: some will become the background, while others can be used to form a symbolic eight. To begin with, the glass container is cleaned of the label. This step can be skipped if you use yellow paper cut into small “straws”. It is randomly glued onto the glass, thus filling the future gaps between the sweets. Now proceed to gluing the ponytails on the candy wrappers. They are carefully fixed on one of the sides of the candy to make perfect balls. Then the sweets are glued directly to the bottle itself. Start from the bottom. The second row is laid in a checkerboard pattern above the first, so that there are as few gaps as possible. The candies themselves are pressed tightly against each other. After the last row reaches the neck, they begin to make leaves. Elongated fragments are cut out of crepe paper. They are glued to the neck, and wrapped on top with a satin ribbon with a flirty bow. It remains only to “pull out” the crepe leaves with scissors so that they curl slightly and bend. Such a removable decor will eventually be mercilessly eaten by sweet tooth, but for a couple of weeks the bottle will still show off in the “front” place in the apartment.
To decorate a bottle of champagne, you will need approximately 600-700 g of sweets. Instead of crepe paper leaves, you can use a cut top from a real pineapple.
Decoration with polymer clay flowers
A bottle of sparkling wine or champagne can be decorated with polymer clay flowers. The work will be divided into two stages:
- Making jewelry.
- Bottle decoration.
Polymer clay is ideal for beginners. Although the "classic" material requires firing, this name is now used to refer to a group of self-hardening compounds. Only small items are made from polymer clay. With the help of scissors, tweezers and needles, you can create neat clover heads, delicate orchid or lily buds, miniature roses. Two or three types of polymer flowers are usually used to decorate a bottle so that the decor does not look poor and boring. Although no one limits the master's fantasy: if you have enough perseverance, you can collect a full-fledged bouquet of field herbs.
To make a polymer clay clover, take an evenly rolled white ball. It is wrapped in a rolled "pancake" of lilac or pink hue. The tips are carefully pinched, and the surface is leveled. Now, triangular cuts are made with nail scissors over the entire surface of the future flower, starting from its base. At the same time, the staggered arrangement of the petals is observed, like a real clover. Then each incision is carefully bent away from the base and slightly pulled out. Neat inflorescence petals are obtained: pink on the outside and white inside, like a real clover.
To create a simple flower, you only need polymer clay of one shade and a special tool with a ball at the end. The future base is first rolled into a ball, and then smoothed to a “pancake” state. From a large piece of polymer clay, they are gradually pinched off, balls are rolled up, and then they are pressed with force with the ball-tip of the tool. Neat circles with a thickened border are obtained. These petals are fixed on the base in rows in a checkerboard pattern. It is advisable to create four or five rows to get a lush flower. In the center, you can use a round bead-middle of a different shade.
The bottle in hot water is cleaned of the label, the glue layer is carefully removed. Then, spray paint (for example, silver) can be applied to the surface, wrapped with ribbons or cloth. When the background is ready, proceed to fix the floral decorations. They are glued on. For the composition, a place is usually chosen in the center (where the front label used to be) or closer to the neck. Additionally, the bouquet is decorated with crepe paper leaves or green satin ribbons.
We decorate the bottle with a cloth
The decor of the bottle with a cloth can be made using any textile (nylon, linen, silk). Leather will look stylish and luxurious. Before wrapping the bottle, the material is soaked in the adhesive composition. Then it is applied to the glass, but loosely. The resulting folds will give the product an additional relief. The decor of bottles with fabric is often combined with decoupage technique. To make a tender gift for a young girl, you can use twine (dense fleecy thread for tying paper bags), burlap and white openwork lace. The bottle is cleaned of labels, sprayed over it with silver spray paint or sprinkled with glitter on a pre-applied adhesive. When the surface dries, the container is partially wrapped with burlap, which is fixed with glue. On the sides, the rough decor is set off by white openwork stripes of lace. Complement the decoration with a bow of several threads of twine on the neck, white beads, textile flowers.
To decorate the bottle with ribbons or trim, you only need fabric strips and glue. You don't even have to remove the label. Start work from the neck. The tape is wrapped around the glass surface in an oblique line (the back is much higher than the tips). The ends are trimmed, then a new tape layer is applied on top. You can “dress” the bottle in this way to the very bottom. The decor is complemented with flowers, beads, buttons, bows, although the combination of ribbons of different colors allows you to create a self-sufficient “suit” that does not need additional decorations.
Decoupage technique
Decoupage is one of the favorite techniques for beginner decorators. Images are applied only to a smooth, pre-treated surface. The label is removed from the bottle, then the glass is wiped with acetone or alcohol to degrease. After that, a layer of primer (acrylic paint) is applied, the color of which goes well with the gamut of the selected picture (a tone lighter). Then they take a three-layer napkin (magazine clipping) and separate the colorful front layer. It is impregnated in glue and immediately applied to the surface or first soaked in water (several options).
Some masters prefer not to cut out the drawing, but to “pull out” in the literal sense of the word. Then the edges of the napkin on the bottle will not be noticeable. After applying the picture, it is carefully leveled, removing unnecessary air bubbles.
It's important to know. Additionally, the bottle can be "puttied". Take a stencil and put a thick layer of putty on the glass. The embossed pattern is painted over to match the background color. Usually they use thin knitting or an ornament with floral motifs. Decoupage of the bottle goes well with decorating with fabric.
Coloring
The bottle is usually painted to create a beautiful background on which the main decorations will look better. Buy acrylic paints for glass. You can paint the bottle both inside and outside. For internal work, the composition is simply poured through the neck and the container is thoroughly shaken so that it is evenly distributed. Then the bottle is turned upside down and the excess paint is allowed to drain, and the one that remains on the walls to dry. To paint the glass on the outside, you can use brushes and sponges. The drawing is applied using a stencil. Those areas that should remain intact can be sealed with masking tape. Spray painting allows you to apply an even layer without brush strokes. The same method will help to get the ombre effect (color gradation), since each subsequent layer fits neatly on the previous one, and the master himself adjusts the color intensity. Glitter will create a bright, festive decor. Glitter is applied to the surface, which was previously smeared with glue. Shake off excess pieces. It is better to work on newspaper, as the waste can be collected and carefully poured back into the jar for reuse.
Making compositions from natural flowers and a bottle of wine / champagne
A bottle of wine or champagne can be presented in a simple box wrapped in paper and decorated with a bow. Usually a bouquet of flowers is attached to such a gift. And what if both of these presentations are combined? Get a luxurious gift, decorated with your own hands. Bottles are usually placed in wicker baskets. In addition to flowers, fruits are picturesquely arranged in them. First, the basket is wrapped from the inside with a transparent film. Then a piece of floral sponge is adjusted (cut) to fit the shape of the wicker container. Such a "foundation" will not only hold the components of the bouquet in the right position, but also disinfect the water that will nourish the stems, which will allow the flowers to last longer. The sponge is placed in a basket. The edges of the transparent film are wrapped inside.
