Making a bottle of vodka by February 23. How to beautifully decorate a bottle of cognac with your own hands as a gift for a man in military uniform, a policeman, a hussar, a tuxedo, a photograph, ribbons, sweets, a bouquet of sweets: ideas, design, photos. How to decorate a bottle

27.09.2019

Have you already decided how you will congratulate your man on February 23 - Defender of the Fatherland Day? We offer an excellent master class on decoupage bottles of cognac, rum or vodka by February 23.

A favorite alcoholic drink is always purchased for the festive table. So why not decorate it according to the holiday.

To decoupage a bottle by February 23, you will need:

A bottle with an alcoholic drink (vodka, cognac, rum);

Means for degreasing the surface of the bottle (window cleaner);

White acrylic paint as a primer + foam sponge (for washing dishes);

Decoupage napkin with a suitable pattern;

PVA glue, hairspray, decoupage glue;

Acrylic paint (burnt umber, olive, cream, black colors);

Black acrylic outline, glitter;

Panel varnish.

Take a bottle of liquor and peel off the paper label.

Before starting decoupage of the bottle, you need to degrease the glass surface with any means suitable for this purpose. After that, start the primer, for which cut off a small piece from the foam rubber sponge and apply white acrylic paint to the glass with wetting movements (Fig. 2). You must apply at least two coats of paint, while allowing each coat to dry.

Prepare an image that will be pasted on the bottle. In this case, a greeting card was downloaded from the Internet and printed on a laser printer. This image is printed on a napkin (Figure 3).

This should be done as follows: take a regular paper sheet and attach a white layer of a colored napkin to it, fold the edges and glue them with PVA glue on the back of the sheet. Print on the front side, then tear off the paper.

For the best sticking, sprinkle with hairspray and cut out a fragment from the napkin (Fig. 4).

Try on the cut out fragment with the pattern to the surface of the bottle. It is advisable to adjust the pattern in size so that there is as little excess as possible (Figure 5).

Glue it with decoupage glue. A napkin sprinkled with varnish will not get wet, and will lie down well without wrinkling (you just need to generously soak it with glue) (Fig. 6).

Wait until the glue is completely dry. And prepare for painting (Figure 7).

Pour on a disposable plate of acrylic paint of the previously described colors (Figure 8-9)

Lightly mix the paints, and start painting on, as if continuing the image. Paint over the printed image to hide the transition of colors (Figure 10).

In this master class, you will gradually learn the process of creating your product. In the course of work, you will see how to decorate a bottle with satin ribbons. According to this master class, both an adult and a child can handle step-by-step photos with bottle decor.

MATERIALS AND TOOLS

For work we need:

gift bottle (in this case cognac),
blue satin ribbon (or green, khaki), 1 cm wide,
black satin ribbon, 1 cm wide,
white satin ribbon, 5 cm wide,
cardboard,
scissors,
glue universal,
decorative stars,
tweezers,
Scotch,
iron.

MASTER CLASS

Let's start making clothes for the bottle. From the roll we cut off 12 cm of satin ribbon.

Iron the corners of the satin ribbon.

We fold the tape by 1/3 and again iron it with an iron, so we get “ shirt collar».

Cut a white satin ribbon to the size of the neck and glue it to.

Glue the "collar" on top of the tape.

Tie from black satin ribbon tie.

We put a tie on the neck of the bottle.

In order for the tie not to interfere with the further decoration of the bottle, you need to lift it and secure it with tape.

We continue to make clothes for the bottle.

Now we will decorate the bottle with a blue satin ribbon - the future tunic. We cut off the tape a little more than the neck of the bottle and glue the blue tape under the "collar".

Then again cut off the blue tape and glue it, slightly overlapping on the previous tape.

Thus, row after row we glue a blue satin ribbon. It is necessary to decorate with a blue ribbon about half of the bottle.

Now we take a black satin ribbon and glue it to the bottle exactly horizontally.

In this case, we will not cut the tape, but simply stick it in a circle.

We coat the bottle with glue and tightly glue the tape to the very bottom of the bottle.

Let's put the bottle aside and get to work. shoulder straps. To do this, we need a blue satin ribbon, two pieces of 3 cm each.

On one side, cut off two corners.

We glue stars to the tape, ordinary tweezers are best suited for this.

We glue shoulder straps to the bottle.

Now let's get busy cap. We cut off a strip of cardboard 2 cm wide and a circle slightly larger than the diameter of the bottle cork.

We glue a strip of cardboard with a satin ribbon.

We measure the diameter of the neck and glue the cardboard into a circle.

The circle is also glued with a satin ribbon.

We glue the two elements together.

Now glue the star to the cap.

Here we have such a bottle in military uniform.

Your product can be presented for the holiday to relatives, dad, grandfather. Each person will be happy with a handmade gift, because you put your soul and mood in the process of creation. I wish you success and creative ideas.

The art of gift wrapping is actively developing, thanks to individual enthusiasts with high aesthetic demands and excellent taste. Often they share on the Internet their masterpieces in the photo and master classes on the video.

At first glance, it seems that only an experienced needlewoman can make such a design. In fact, there is nothing complicated here.

There are many interesting ideas on how to decorate a bottle of brandy with your own hands for a man's birthday or February 23rd. It is not necessary to completely copy this or that sample step by step if you want to do something similar. Turn on your imagination and work in the technique that seems most interesting and accessible.

What to give to a dear person or an accomplished man who does not need anything? The author's decor of a bottle of cognac as a gift for a man is often the only way to surprise a wealthy man who has everything with his inimitable offering.

A good cognac will be an excellent present for a birthday or February 23, if the bottle is beautifully packaged

People whose imagination is limitless do not need to be prompted with good ideas - there are much more of them than the possibilities for their implementation. For most lovers of crafting something, ready-made examples are needed for inspiration, with a detailed description and a photo of how to do it step by step. Experienced craftsmen do everything in their own way, only taking a quick look at the finished result, as in the photo of the design of a bottle of cognac with a candy bouquet.

Bouquet with alcohol for a man

For some, a multi-layered “package” with many elements will seem too complicated. Then you can simply paste layer by layer on the bottom of a round cognac bottle planted on a circle of foam, wrapping it with sweets or copied banknotes.

Glass bottle pouch

The design theme may vary, depending on the hobby of its future owner. Fans of sea travel, fishing and aquariums will surely appreciate decoupage with fish, shells, starfish on the theme of a sea pirate. After the celebration of the birthday, such glass containers can claim a worthy position in interior decor.

This bottle is pasted over with everything that was at hand.

A popular theme is the personification of wealth in any form. It can be a mossy bottle from the bottom of the sea, filled with souvenir coins, on which lightning suddenly broke. A bottle of cognac, representing wealth, is best presented in a set with other attributes on the same subject, including figurines and chests, banknotes and coins.

To imitate a pirate bottle full of money, you will need napkins, a zipper, coins, glue and paint

Starting to design a bottle of cognac for a man, be patient, use improvised materials and tools.

1.	Knife and scissors with sharp ends	For cutting materials.
2.	Ruler, pencil and square	For layout templates.
3.	Satin ribbon in desired color	Shape the neck.
4.	Dark Bias	For wrapping a cognac bottle in the color of a tunic.
5.	Polyethylene and thin thick cardboard, thread	Form the base of the tunic, polyethylene will protect the cognac from glue.
6.	Thematic fittings and decorative elements	Select by similarity with the insignia of the military branches.
7.	Glue, needle and thread	For fixation.
8.	The foundation	A bottle of good cognac or other strong drink.

The sleeves of unwanted shirts or sweaters can also be turned into gift wraps.

A little time - and an exclusive gift will be ready for the birthday of a loved one, which will be able to amaze the most demanding company.

Making a bottle of cognac in a tunic

The military theme of the design of a bottle with an elite drink will seem interesting to many, no matter if it is cognac, rum or whiskey. The main thing is the shape of the glass container, which is easy to give the shape of a male torso. To do this, you need a flattened bottle with "shoulders" and a low neck, which are quite a lot on supermarket shelves.

A flattened bottle is better for decoration.

Decorating such bottles seems to be the most interesting for beginners, since it is easier to imagine the end result - a uniform and a cap, as in the photo.

An example of the design of a bottle of cognac in the form of a tunic

With the help of such a gift, it is easy to imitate any dress uniform:

soldier;
sailor
Ministry of Emergency Situations;
policeman;
security officer, etc.

The idea is simple - wrap the bottle with ribbons, but you need to do it beautifully

If you carefully consider the proposed sample, it is obvious that many fragments are easy to vary by making the main elements with your own hands:

tunic;
shirt collar;
tie;
cap;
shoulder straps;
marks of Excellence.

Important! Recall that the accuracy of work and the integrity of gift wrapping depends on many factors, including experience in needlework, a good tool and means for fixing.

Before decorating a bottle of cognac with your own hands, prepare
materials and tools:

polyethylene;
thin and thick cardboard;
satin ribbon of the desired color;
oblique inlay (for wrapping);
brushes and foam rubber sponges for staining;
thematic accessories (buttons, stars for shoulder straps);
twisted silk thread (for fixing internal elements);
sharp knife and scissors with sharp ends;
pencil and square for marking;
a bottle of good cognac (another strong drink).

The main material is a satin ribbon

We perform step by step.

Wrap a bottle of cognac in a bag, fix it with a thread and loosely pack it in a cardboard base and make hangers. Glue open fragments with pieces of cardboard in size. For the convenience of fixing the rounded parts of the edge, it is better to arrange the teeth.
Trying on a white ribbon on the collar
We work with ribbons - a white collar imitates silk satin. The second section goes like a breast part under a tunic. We form a tie from a black ribbon of a smaller width and carefully fasten it under the collar.
It is convenient to use a hot glue gun to fix the tapes.
We form a black tunic, starting with wrapping with an oblique trim in the neck area, carefully glue it. After the top is formed, it is better to remove the bag from the bottom. We form the tunic with a ribbon to the very bottom.
It is important to tightly wrap the bottle
We form shoulder straps and select fittings for insignia of the military branch, we make a badge, a medal from a brocade ribbon.
Shoulder straps can be made from suitable pieces of ribbon
We make out the lapels of the tunic and the clasp, under which it is easy to hide the joints and trimmings of the tape. We fix the medal, badge and buttons.
The number of buttons is up to you.
We turn to the design of a cap from tape and cardboard. It is more convenient to fix the visor after cutting the segment for fixation with teeth. It can be immediately made from black cardboard or pasted over with tape. Next, from 2 circles of the required diameter, we form a cap, as in the photo.
Scraps of thick fabric are suitable for a cap
After wrapping with a ribbon, we decorate with insignia. You can donate!
This is how the bottle turned out

Advice. To prevent the edge of the tape from crumbling, it is better to make a hot cut with heated scissors (use work gloves) or a soldering iron. You can walk along the edge with a brush with transparent silicone glue.

Gift bouquet with cognac and sweets

Not so long ago, bouquets of sweets and banknotes (or their imitation printed on a copier) came into fashion, and so many interesting ideas have already appeared. Consider the most complex manufacturing option - with paper flowers and money symbols, as a hint of a wish for success and prosperity. This is just one of the options on how to beautifully decorate a bottle of cognac with your own hands for a man's birthday.

The decor and content of the composition can be different, it all depends on your imagination.

You can decorate the list of elements arbitrarily, but for the proposed composition you will need:

a bottle of cognac of your favorite brand;
crepe or crumpled paper of different shades;
Styrofoam;
glue gun;
stationery knife;
Double-sided tape;
floristic ribbons 30 mm and 50 mm;
souvenir money;
euro and dollar templates;
sweets in golden and colored wrappers;
chocolate coins in foil;
bamboo sticks or toothpicks;
glue gun or "liquid nails";
pencil, ruler (square) and scissors;
twisted silk thread for fixing;
cardboard A4;
decorative twine.

Multi-colored crinkled paper is best for flower petals.

The volume of packaging and the number of materials for decoration varies according to the design of the volume of a bottle of cognac for a man.

Execution step by step.

We cut out the circles of foam in steps and wrap them with crumpled paper to form the basis for souvenir packaging. The ends of the foam and the hole for the bottle are beautifully designed as a wavy ruffle.
We determine the height of the stand in the course of work: we insert the bottle into the cut hole and see that it is stable. Add more circles if needed.
We lay out the sweets not very tightly to wrap them in paper flowers and place them on the finished base.
We cut the petals from crumpled paper of different shades, thick dark green wrapping paper or fabric will go to the petioles.
First, we cut rectangles of about 40x70 mm, then we give the shape of petals with scissors
We form candy flowers in petals, at least 15-17, as shown in the photo.
The more you fix the petals, the more magnificent the roses will look.
We turn to the manufacture of banknotes based on cardboard, they must be attached to bamboo sticks or toothpicks.
For money symbols, you need thick cardboard and souvenir money
We form a ready-made bouquet of candy flowers, chocolate coins, souvenir money and photocopies of banknotes. We wrap the lower platform with a beautiful ribbon and tie it with a bow, you can insert a card with best wishes and an envelope with real bills. Souvenir bouquet is ready to give!
The composition is ready, you can congratulate the man on the holiday!

A handmade gift is always better than a “duty” souvenir. It doesn’t matter whether it is the decoration of a bottle of cognac for a man with ribbons, chocolates or paper, the main thing is an interesting idea. We offer you to choose something most suitable for your dearest person in our photo gallery.

Video: decorating a bottle of cognac using decoupage technique

Presenting a bottle of wine or your favorite strong drink to a man on February 23rd is always a good idea. The strong half of humanity gladly accepts the idea of replenishing the bar, especially with high-quality labels. In addition, it is not ethical for every man to give a standard classic set, which traditionally includes shaving accessories, socks, men's cosmetics and more. If you barely know a young man or have a business relationship with him, it is advisable to replace a banal intimate set with something worthwhile and necessary. Australian wine or Irish whiskey will not be superfluous, especially in honor of the holiday. But how to make a gift not impersonal? How to demonstrate your attitude and creativity? I have an idea!

Bottle decor for February 23

Good alcohol costs money, and it is important not to spoil the bottle with the tasteless design that can be found on the World Wide Web. It doesn't matter that you like decoupage and you own this technique, yet February 23 is a men's holiday with a brutal touch. No need to use lace and floral country. Rate our stylish bottle decor ideas for February 23 - the photo is attached.

bottle label

Making a cardboard bottle label is a good and simple idea. You can use a ready-made sketch, make a layout of the original bottle label in one of the editors on your computer and print it for absolutely ridiculous money in any appropriate place. You can use a photo of the recipient of the gift. And why not choose one of the famous Star Wars movie aphorisms and subtly emphasize the knowledge of his tastes?

The second option to make a bottle label by February 23 is to cut everything out by hand. Such a craft is not a problem for those who are engaged in scrapbooking, because there are many decorative elements at hand that can be used. The great advantage of a paper bottle tag is that you can personalize your gift: put on it the name, place, date - in a word, any information.

We use paper

Decorating a bottle with paper is a quick way to give it a gift look. You can take gift paper with a trendy print. In the area of the neck of the bottle, simply twist it in one direction, if desired, you can add tape or thread to secure it, but this is not necessary. By the way, you can also attach a small label to the bottle, writing wishes or a joke by hand. An inexpensive and stylish option is to wrap the bottle with craft paper. On it you can draw something by hand, make inscriptions. Everything will look very beautiful - this is the effect of hand-made creativity using paper. There are also techniques for openwork paper bottle design by February 23, which looks no less impressive.

Original ways to decorate a bottle on February 23

To the original methods, we attributed completely different bottle design techniques for the Defenders of the Fatherland Day, which are distinguished by their expressive idea. Some of this can be repeated, and something is designed to evoke some new unique ideas. One incredibly quick way to decorate bottles - and this is very important if you have a large party of gifts or are planning a stylized party - is to use painted pasta to decorate the bottle.

tie a knot

This gift design option will demonstrate your resourcefulness and creativity at the same time.

You need a new kitchen towel, kerchief, or a nice cloth about the same size. Just tie a decorative bottle, and preferably two, and even in such a way that a convenient carrying handle appears.

Making it masculine

Surely your husband, brother, father has shirts in his wardrobe that are either out of fashion or damaged by a stain - it doesn’t matter. They are exactly what we need! Decorate the bottle by February 23 in the sleeve of a men's shirt.

As a decor, you can add a miniature tie or bow tie.

DIY bottle case

Even if you don't have a sewing machine handy, sewing a bottle case is easy. Canvas fabric with prints and inscriptions looks textured. Satin ribbons and gift tags will not be superfluous. Sew a bottle case by hand and tie it with prepared twine or ribbon - your original hastily gift is ready for February 23! Photos of handmade bottle cases are attached.

Soon the whole country will congratulate the strong half of humanity on the courageous holiday. If you present a bottle of alcohol as a gift, you can decorate it with a stylized military uniform - knitted, paper, ribbon or fabric.

Clothes for a bottle - crochet

Today we will crochet such an ornament. Master class on bottle decor from.

Materials and tools

For knitting you will need:

Yarn "Beaded" olive color, yarn "Children's hit" white, yellow, blue;
Hook 1.75mm;
Scissors;
Needle.

You can use yarn from the same manufacturer. For example, only beaded. If you use a different thread, then the hook must be selected according to its thickness.

Master Class

We will knit the main part from the bottom up. First, we collect a chain, the length of which will be equal to the girth of the bottom of the bottle. In this master class, a bottle of beer with a capacity of 0.5 liters is used.

So let's start knitting military uniform. We close the chain in a ring and make 2 lifting loops. Next, we knit 1 half-column with a crochet in each loop of the chain. We connect the row with a connecting loop into the 2nd lifting loop.
Photo 1

Then we will simply repeat this row 18 times. And then we will knit a row not with half-columns with a crochet, but with columns with a crochet. Calculations are given for a bottle of about 5 liters.
Photo 2

Then we knit a row, but at the end we do not connect into lifting loops, but we make 3 loops and turn around. We knit in the opposite direction to the end of the row.
Photo 3

Next, knit 4 more reversal rows. We have formed the collar. Now we will knit a chain of 18 loops from the yellow thread. This will be one tier of aiguillette.
Photo 4

Then we will make the second tier of 15 loops and attach it above.

Let's connect vest.

With a white thread we collect 21 loops. We turn around and knit 20 single crochets. Then we change the thread to blue and perform 1 more row of single crochets. So, changing the thread in each row, we will complete only 7-8 rows.
Photo 5

We sew this part from the wrong side of the main part so that it seems to stick out of the cutout.

It remains to connect beret. In the amigurumi ring we knit 6 columns. Next, we will add according to the principle of amigurumi. That is, in one row, we knit the increase in each column of the bottom row. And in the next one through the column, then through 2 columns. Then every 3 columns and after 4.
We get an amigurumi circle of 36 loops.
Photo 6

The next row will be knitted only for the back walls of the loop. We perform 36 columns without a crochet.
Next, we will knit decreases in each of the rows. We decrease after 4 columns, we knit for both walls of the loops.
Further, we will knit decreases through 3 columns and through 2 columns.
Photo 7, 8

We fill the bottle. The decoration on the bottle for February 23 is ready!

Paper bottle decoration

In this master class, we will make an officer's uniform for a colored paper bottle.

For work you will need:

colored paper;
Sheet of white paper;
Bottle;
Glue;
Pencil;
Scissors;
Brown satin ribbon.

Cut out a sheet from white paper. It should wrap around the bottle and overlap by about 5-7 mm. The height of the sheet should be approximately 2 - 2.5 cm above the place where the bottle expands from the neck.

This will be the shirt. It needs to be glued on the front.

Let's make a collar. To do this, we bend the corners of the paper at the same level on both sides outward.

On the sides of the paper we crush to the bottle, taking back the excess. At the back we form a triangle.

Bend it down and glue it.

Now we need a satin ribbon as we will be making the tie. Cut out a piece in the form of a tie from a brown ribbon.

Now we wrap the sides inward to the center and glue them there.

The resulting tie must be glued to the shirt, slightly winding it under the collar.

Now let's move on to making a tunic, so you need green paper.

We cut out the sheet that should wrap the bottle with an overlap of 5 mm. The height of the sheet should be the same as that of the shirt.

Now you need to bend the upper corners of the sheet to the center of the tie and glue them in this position.

The side parts of the sheet must be bent to the junction of the corners. We push the excess paper inward, forming pockets.

Cut out a strip 4 cm wide. Fold it in half horizontally.

The strip should cover the resulting folds on the tunic and form a collar. The length depends on the size of the bottle.

Now let's make a belt. Cut out a wide strip from brown paper. Its length depends on the girth of the bottle. It should be enough to completely wrap the bottle. Glue the part just below the middle of the bottle. Glue a yellow square in the center.

Now let's make the boots. From black paper, you need to cut a strip slightly wider than the belt. They should be the same in length. Glue it to the bottom of the bottle.

We cut out small stars from yellow paper and glue them on the collar of the tunic on the sides.

We decorate the collar of the tunic. Cut out 2 yellow checkmarks and glue them.

It remains to make a cap. Cut out a circle with a diameter of 4 cm from cardboard.

Glue the same circle of green paper on top. Now you need to cut a strip 2 cm wide. Its length should be enough to wrap the cork. We glue the part into a cylinder.

Now with scissors we make cuts of about 5 mm at the same distance from each other in a circle. Then we lift the resulting stripes.

Lubricate the strips with glue and glue them to the cap from below.

We circle the top of the cap on green paper and cut out this circle. Then we circle the lower part of the cap in this circle and cut it out. Get a ring. Lubricate it with glue and put it on through the bottom of the cap. We glue, thus hiding the cuts. If the cardboard is thick, you can glue thin twine around the edge or just paint over the edge.

We put a cap on the cork.

This is how a military uniform made of colored paper turned out.

Ribbon bottle decoration

More options for decorating bottles by February 23 with your own hands

You can sew a military uniform and a cap for a bottle and make an order:

The shape can be molded from plastic, or:

If your favorite technique is decoupage, then you just need to find the right napkins to decorate the bottle.

However, the theme of bottle design for February 23 is not necessarily military. For example, we have a master class by Oksana Alexandrova "".

And if you dream up, you can use cardboard to turn a bottle into an airplane: