Family tree program. How to draw a family tree: templates and programs

08.09.2019

Personal extended horoscope: 2017:

Usually in the horoscope today the reader is presented with an astrological forecast of the main spheres of human life ...

Your man's personal horoscope is a service for women who can find out everything about their man by his personal horoscope.

The personal horoscope of conception is compiled on the basis of the position of the planets at the time of birth.

Personal horoscope for 2017 - an astrological forecast of the main trends of the year plus a personal calendar of good days.

Compatibility Horoscope v2.0 is the most modern, interesting and complete service. The level of detail in the development of the service is such that its quality corresponds to the personal consultation of an average astrologer. The client also has the opportunity to ask clarifying questions after receiving the horoscope.

Personal astrological forecast for a biological year is a forecast for a specific person for a year, from one day of his birth to the next.

« Family tree"- this is the name for a schematic tree-like representation of family ties, where the ancestor is located at the" roots ", and the" branches "represent the lines of his descendants.

In the past, it was stylized like a real tree, and such a scheme was considered very convenient for perception and the formation of ideas about the development of each specific genus. Also, a family tree is called the image of genealogies in the form of descending or ascending genealogies or genealogical tables.

Family tree template

Download	Download
Download	images / drevo / 4.jpg "target =" _ blank "> Download
Download	Download
Download	Download
Download	Download
Download	Download
Download	Download
Download	Download
Download	Download

The circular table is a private option, and therefore rarely used by geneology. The variant of "mixed ascending lineage" is also not widespread, in which the ancestor is located in the center, with outgoing lines to the ancestors on the paternal and maternal lines. Similar tables are typical for English, French genealogy. The person whose ancestors are being studied is placed in the center of the circle, the outer, the second circle is divided in half, indicate the father and mother in it. In the third, concentric circle, divided into 4 parts, grandparents and so on are recorded. Until now, tables of ascending ancestry are required to represent those entering the Order of Malta (a knightly organization whose charter requires evidence of the origin of a sufficient number of ancestors).

Anyone who is interested in their ancestry and wants to build knows that it is quite difficult to do this. However, now there are many ways to help build your own pedigree using special devices. So, a family tree, the program for which can be freely downloaded on the net, can be built quite intuitively, if, of course, you have the necessary data. This, undoubtedly, significantly increases the popularity and significance of conducting research on the history of one's surname.

Genealogical family tree

Family tree of Zhukovs

Some services offer building a family tree for free, which also attracts many users. This creates the preconditions for the mass enthusiasm for the study of genealogies by a wide variety of families. If at first you do not understand exactly how to build a pedigree, then you can download a ready-made family tree. Its template can help you shape your own structure and fill it with the content you have.

As you can see, it is possible to draw up a family tree quite independently, without using the help of specialists. But this cannot be said about the very extraction of information with which you will fill the family tree. Here you cannot do without the help of historians and archivists, unless of course you want to get to the very roots. As an example, you can refer to the Romanov family tree, which is still popular today. Who knows, maybe there was someone of royal blood among your ancestors.

Common family trees for surnames:

Ivanov tree, 6%
Petrovs tree, 4%
Mazurov tree 3.8%
Genealogy of the Belozerskys, 2.6%

Having compiled the genealogical tree of the family, it can be passed on to the children and grandchildren, who will continue to work on clarifying and supplementing it, honoring the memory of ancestors and increasing the authority of the family. This is where special tools come in handy, such as the family tree program, which is very easy to download for free. The interfaces of such programs usually do not cause any difficulties; you can learn how to work quickly and very easily. On average, you can find up to 25 connections for one surname or family.

Compilation of a family tree can radically change the life of your entire family, will have an impact on all subsequent generations. Having great ancestors will help maintain respect and imitation among the younger generations of the surname. Currently, experts recommend having a family tree in every family, because it will have a positive impact on attitudes towards the family's past and history in general.

An example of a simple tree

Consequently, it is very difficult to overestimate the importance of the family tree for a modern person. It is capable of performing cognitive, educational, stimulating and many other functions. The family tree program, which is offered for free download by a wide variety of sites, will help to organize the work of structuring the available information in the best way, avoiding repetitions and inaccuracies.

Thus, the process of compiling a family tree does not take much time, does not force a lot of effort, and is available to everyone. It is always possible to download a family tree template and, according to the received example, order information search and compilation by specialists. In this case, in addition to the excellent family tree, you will receive the accuracy and quality of the information contained in it.

With the help of modern technology, you can supplement the information contained in the family tree with other documents that reveal the content of each important event that happened in your family. In addition, it is quite widespread to illustrate family history with diaries and special albums, which can also be ordered from specialized firms.

We recommend that you familiarize yourself with our genealogy webinars, they cover in detail: the method of creating a family tree, the process of finding ancestors (the correct choice of requests to the archives, and how and what sources to use when collecting information).

How to Build a Family Tree Online on FamilySpace

To add new family members, use the mouse to select the "Next" arrow and enter the data about the new relative. If you want to edit the entered information, you need to click on the "Menu" button and go to the required action. You can edit information about relatives by going to the person's profile.

How to print a mock family tree?

Download family tree and print, possibly by selecting the printer icon. You can also use our paid design service family tree by choosing one of the presented types of design, the service is available in the "Pleasant" section. By default, on family tree The template is set in the classic FamilySpace design. If you wish, you can order a painting with a picture of a tree, the function is available in the section "Our Services".

Who sees my family tree?

You can independently set your privacy settings and decide who to grant access to. Information may only be available to you, all your family members, friends, or all FamilySpace users. It is possible to limit the viewing ability in the "Settings" section.

Also, you can limit the ability to edit by your relatives, in this case they will have all the information, but they will not be able to make changes and accidentally erase something.

Is it possible to combine family trees?

If a relative registered on FamilySpace is added to the family, and some of the data in your family trees overlaps, the system will automatically reconcile and offer to merge the trees. In the case of doubles (duplicate questionnaires) in the family tree, you can independently choose the principle by which to combine them - save data from family tree, from the tree of the relative to be attached, or save as much information as possible by combining data from both trees.

I am using a different program on how to transfer my family tree to FamilySpace?

If you use other programs (for example, "Tree of Life") or are registered in social networks (for example, MyHeritage), there is an option to import family tree on FamilySpace. First, you need to keep your genealogical tree in GEDCOM format (usually available in the "Save As" or "Export" menu items). Next, you need to go to FamilySpace, in the "Family" section and select the GEDCOM item, then - import the resulting file to FamilySpace. Not every program allows you to export the pedigree tree, in case of questions we recommend looking at the "Help" section.

How is creating a family tree on FamilySpace different from other projects?

FamilySpace is by far the largest project in the Russian Internet in the segment of family social networks. Construction tool family tree takes into account a lot of nuances associated with the peculiarity of information (for example, support for patronymics, names of cities and towns in Russia, taking into account multiple name changes and many other factors). The tree supports difficult situations, for example, when family members divorced several times and have children from different marriages.

The FamilySpace team also independently scans archival materials; on the site you have the opportunity to find references to your ancestors in various materials, for example, population censuses, calendars, city directories.

Each person should know the history of his family in order to have an idea of his origin, status, historical value. However, not everyone knows about their relatives beyond grandparents (at best). Today, it is becoming fashionable to compose your own pedigree, the so-called family tree (the program will help you do this in a colorful and visual way). This scheme is called a tree due to the fact that many relatives "grow" from one person, like the crown of a tree.

What you need to compile a pedigree

The first step to compiling a pedigree is to gather information. This can be helped by a program for building a family tree, in which you can determine possible related lines by surname. However, it is quite clear that it is difficult to find your relative by last name, therefore additional information is needed to find the right person.

A genealogical card is drawn up for each relative, it contains a list of data that must be provided.

Sources of information about relatives

It is necessary to arm yourself with writing materials and turn to relatives in order to write down not only the surnames, names and patronymics of relatives known to them, but also the place of residence and other information about the life of relatives, their social activities, participation in global events.

With the information received, you can go to the archive and, for a certain fee, track the data on the movements of the members of the clan. For an employee of the archive, the dates of birth and death of a person are important. If the exact information is not known, at least an approximate period should be indicated.

The information you need may end up in old family records, so you should consult the written sources. Older people have a penchant for recording important events, including information about ancestors. It is quite possible that you can find your distant roots in the notebooks of grandmothers.

Basic and additional information in the family tree

The main, that is, mandatory information is data on birth and death, all other data obtained is called secondary.

The data obtained during the collection of information may be necessary only at the stage of searching for relatives, however, special merits or status can be indicated directly next to the data about this person on the family tree. For example, information on the number of marriages at first glance may seem superfluous, but at the same time, if children are born in each of the marriages who are already relatives to each other, then when posting information about them without mentioning each marriage, the tree will look incorrect.

How the tree builder works

The program for creating a family tree has several forms of information presentation, which will be discussed further. Information is saved in a specific format, a single sample. Therefore, a program for compiling a family tree allows you not only to enter data directly into this program, but also to import it from another.

In addition to basic information, the tree may contain photographs, dates of birth and death, and other important information (at the discretion of the components).

The necessary data is entered into the program, after which the tree can be printed or saved in the most convenient form for the user. By compiling a family tree, the program allows you not only to obtain the necessary information, but also to arrange it in its original form. This allows you to make the tree an original gift for relatives on any memorable holiday for the family. There is more than one program for compiling a family tree, there are quite a few of them. Although they work the same way, some may find it more convenient to use the Tree of Life, GenoPro, or Family Tree Builde software. You can save data both within the program and use online compilation, and then the tree will be saved on a computer or other device.

Usually, the program allows you to create a family tree of a family quickly enough, it has a convenient, simple control.

How can you imagine a family tree

The traditional way of presenting information is a schema. A family tree, the program for which has several templates for saving data forms, can fit the diagram into a tree or other colorful shape. The scheme in which the family coat of arms will be placed looks much more solemn.

You can display the data as text information, or you can add only photos, without signatures. By the location of relatives on the diagram, you can understand the degree of kinship of certain people.

The data can be presented as a bottom-up, mixed-flow diagram along the vertical axis.

Similarly, information can be presented on a horizontal plane, but with a large amount of data, it will look dull.

In addition to a schema, one of the types of information presentation is a table. Information in this form is more difficult to assimilate, nevertheless, this type of tree is also used.

Types of family trees

You can draw up a diagram from ancestors to descendants, for which they take the most distant ancestors and then branch off relatives from them. This allows you to find relatives, for example, on the maternal side. In this case, the program builds the family tree of the family in such a way that brothers and sisters, including cousins, will be located on the same line. This type of data presentation is used quite often and is a classic

The program for creating a family tree also makes it possible to build a tree from a specific person (component) to his ancestors. It is impossible to supplement such a table in the future, but it has a more complete form. In this form, the program compiles the family tree, taking into account both maternal and paternal relatives.

Only the successors of the clan, that is, men, can be added to the tree. Such a tree has a linear appearance, but it is much less common.

fb.ru

Make your own family tree

We continue the section "Needlework" and the subsection "Do it yourself" with the article Make a family tree yourself. The article is based on a PowerPoint presentation, which can be downloaded from the link almost at the end of the article. Using the same link, you can download the sources for creating a family tree with your own hands.

Make a family tree yourself - this is a thematic interesting article that continues the subsection "Genealogy", where we touched on genealogy from a business point of view. But making money on this (or losing it) on genealogy is not necessary, especially since any family can carry out basic operations on their own. By the way, for reference:

Many psychologists, according to professional observations, describe those who do not know their relatives and their family history as less confident in life and, as a rule, have big internal problems. Knowledge of pedigree certainly includes knowledge of the interpretation of your surname. Still, it doesn't hurt to know in detail what is our personal identifier, what we hear every day and pass on to our children as an inheritance.

You can make a family tree of a family yourself in several ways. Of these, the most common:

The first way is to do it virtually, on a computer.
The second is to make it in reality, from a variety of materials at hand.

We will describe both methods, and start with the first.

Creation of a virtual family tree.

Variants are also possible here. One of them is to turn to many free and not so much sites and communities where you can register and create your own tree with pleasure and using the built-in tools. Some communities even offer the function of "crossing" different family trees of members in order to find relatives.

The second option is to create a family tree using a computer editor (photoshop, corel, paint). As an aid, you can use the article "Computer collage". And also the following sequence of actions:

We go to the Internet and look for a suitable picture with a tree for the implementation of the task. In a few days (weeks) you will find many different options, some of which will form the basis of your design creation.
Next, we methodically prepare photographs of our relatives. In this case, it is advisable to limit yourself to direct ancestors and their spouses, otherwise you will have to look for a completely different picture of the tree.
Then we place them in a tree using any graphics program in which you enjoy working. You can add inscriptions under the photos, even mark the place of birth or some historical events (for example, resettlement and connection with a noble family).
You can also stretch a timeline along the side of the tree. This will clearly show the development of the genus against the background of history. You can also add your family coat of arms (if you have already acquired one), rare family photos, a small information on the history of the family, a link to your personal website on the Internet.

That is, showing imagination and a little time, you can make a beautiful family tree on a computer. And then - if you want - print it out on a large sheet of paper. But this can be a problem, since professional printing involves high resolution drawings and photographs (300 pixels per inch), and if the pictures and photos are of a lower resolution, then they may not look very nice when printed. Therefore, in this case, if you want to materialize the family tree, it is better to use the following sequence.

Creating a real family tree

In this case, you are doing nothing more than a collage, so to improve the quality of your work, you can use the articles "Beautiful postcard in 5 minutes" and "Collage - how to make?". Below is an example of creating a family tree from a piece of wallpaper, felt, photographs and patience. You will also need thick cardboard to fit the wallpaper, double-sided tape and glue.

The sequence for creating a real family tree is very simple:

Draw the outline of the tree (roots, trunk and branches) with soap on the felt and cut it out.
Cut a 50 x 60 cm piece from the wallpaper. Stick the cut wallpaper onto the cardboard using glue or double-sided tape.
Place the felt wood over the top and glue all thin parts of it with glue.
Cut the excess protruding parts to the size of the base. Spray your photo frames by placing them in a box with high sides to keep the area from splashing.
Frame your half finished collage. Glue green yarn (thread, felt) imitating foliage with glue to the top of the tree.
Insert pictures into frames. Place them in the middle of the collage. Place your baby photos at the top, and your grandparents at the bottom. Glue all frames to the family tree with glue.

Thus, it is very easy to prepare a family tree.

The question remains - how to fill the family tree?

Well, the simplest option is three generations:

grandparents
mom-dad
and children.

But you can make it even cooler. You can dig a little in the archives (old grandmother's photo albums) and conduct interviews (talk to grandparents). Usually, such a conversation makes it possible to go 4-5 generations deep.

And finally, we suggest you download a small presentation (fully automatic) about the family tree. Simple and understandable (because for children) the basic terms are explained and the sequence for creating a family tree with source codes is given. You can download the presentation at the link: family tree.

By the way, for reference:

Father-in-law is the husband's father.
The mother-in-law is the husband's mother.
Father-in-law is the wife's father.
Mother-in-law is the wife's mother.
Swat is the father of one of the spouses in relation to the parents of the other spouse.
Svatya is the mother of one of the spouses in relation to the parents of the other spouse.
The brother-in-law is the husband's brother.
The sister-in-law is the husband's sister.
Brother-in-law is the brother of his wife.
Shurich (obsolete) - the son of a brother-in-law.
The sister-in-law is the wife's sister.
Kum is the godfather in relation to the parents of the godson and to the godmother.
Kuma is the godmother in relation to the parents of the godson and to the godfather.

For more detailed reference:

Grandmother, grandmother - the mother of the father or mother, the wife of the grandfather.
Brother - each of the sons of the same parents.
The godfather brother is the godfather's son; the cross brother, the cross brother, the named brother - persons who exchanged pectoral crosses.
Bro, bro, bro, bro, brat is a cousin.
A brother is the wife of a cousin.
Bratanna is a brother's daughter, brother's niece.
Bratova is the brother's wife.
A brother-in-law is a relative in general, cousin or distant.
Bratich is a brother's son, brother's nephew.
A widow is a woman who has not entered into another marriage after the death of her husband.
A widower is a man who has not married since the death of his wife.
Grandson - the son of a daughter, a son; as well as the sons of a nephew or niece.
Granddaughter, grandson - daughter of a son, daughter; as well as the daughter of a nephew or niece.
The brother-in-law is the husband's brother.
The grandfather is the father of the mother or father.
The godfather grandfather is the godfather's father.
Dedin, grandfather is an aunt after my uncle.
Dedich is the direct heir to his grandfather.
The daughter is a female person in relation to her parents.
The named daughter is a foster child, a pupil.
Dzherich is his aunt's nephew.
Dscher is the niece of her aunt.
Uncle - assigned for the care and supervision of the child.
An uncle is a brother of a father or mother.
A wife is a married woman in relation to her husband.
The groom is the one who has conspired to his bride.
The sister-in-law, sister-in-law, and sister-in-law are the husband's sister, sometimes the brother's wife, daughter-in-law.
A son-in-law is the husband of a daughter, sister, sister-in-law.
Kum, godfather - see: Father godfather, mother godmother.
Mother is a female person in relation to her children.
Mother godmother, mother cross - the recipient of the rite of baptism.
The named mother is a mother to a foster child, a foster child.
A dairy mother is a nurse, a nurse.
The planted mother is a woman who replaces the groom's own mother at the wedding.
The stepmother is the father's other wife, a stepmother.
A husband is a married man in relation to his wife.
The daughter-in-law is the wife of the son.
The father is a male person in relation to his children.
The godfather is the recipient of the font.
A named father is a father to a foster child, a foster child.
The father is deserted, the father is planted, the father is dressed up - the person acting instead of his own Father at the wedding.
The stage director is the eldest in the generation.
The stepfather is the other husband of the mother, the stepfather.
Father-in-law, stepfather - son, heir.
Stepdaughter is a daughter from a different marriage in relation to a step-parent.
The stepson is a step-son of one of the spouses.
A nephew is the son of a brother or sister.
A niece is the daughter of a brother or sister.
A tribe is a relative, a relative.
The progenitors are the first known couple by genealogy, from which the clan originates.
Ancestor is the parent of a great-great-grandfather, great-great-grandmother.
The ancestor is the first known representative of the genus, from which the genealogy is conducted.
Matchmaker, matchmaker - parents of young people and their relatives in relation to each other.
Father-in-law is the husband's father.
The mother-in-law is the husband's mother.
In-law - a person who is related by husband, wife.
In-laws are persons married to two sisters.
Cousins-in-law - persons married to cousins.
The sister is the daughter of the same parents.
A sister is a cousin, the daughter of a mother's or father's sister.
Sister, sister, sister - cousin.
Sister, sister - the son of a sister of a mother or father, a nephew by a sister.
Daughter-in-law, son-in-law - son's wife, daughter-in-law.
The mother-in-law is the wife of a brother-in-law, the wives of two brothers in relation to each other, a daughter-in-law.
The spouse is the husband.
The spouse is the wife.
The son is a male person in relation to his parents.
The godfather son (godson) is a male person in relation to the recipient.
The named son is a foster child, a foster child.
Father-in-law is the wife's father.
Aunt, aunt is the sister of the father or mother.
Mother-in-law is the wife's mother.
Brother-in-law is the brother of his wife.
Grandchild, grandchild - about kinship originating from the third generation (also second cousin) or even further.
Cousin - about the relationship originating from the second tribe.
Bloodline - about kinship within the same family.
Homogeneous - about descent from one father.
One uterine - about descent from one mother.
Fullbred - about descent from the same parents.
Pra is a prefix denoting kinship in a distant ascending or descending order.
Married - about descent from the same parents, but born before marriage, and then recognized.
Native - about descent from the same parents.
Consolidated - about descent from different parents.
Adopted - a male person in relation to the adoptive parents.
Adopted is a female person in relation to adoptive parents.

How the whole process of drawing up a pedigree will go depends on your desires and capabilities. The results will in many ways be the embodiment of your zeal, ability to establish contacts and "detective" thinking. In any case, all information will be of great value not only for you, but also for all subsequent generations of your large family. It is so important to remember those who were, take care of those who are and think about those who will be.

Successful drawing up of a family tree with your own hands!

interesko.info

How to draw a family tree

Looking through childhood photos or listening to stories of parents, you can involuntarily become interested in your pedigree. Even in ancient times, it was composed in the form of a family tree: this is a convenient way of presenting information. The compilation of a pedigree is even asked to schoolchildren, so you need to know how to make a family tree with your own hands.

What is a family tree

The very concept of "family tree" is a list of people who are related to each other by kinship. The enumeration takes place in a hierarchy based on the years of life of people and who they are to each other. A married couple is indicated on the trunk of a tree, standing at the head of the clan. Then they arrange their children, grandchildren and cousins, sisters. At the same time, generations are on the same level. This option is classic, when the construction goes from ancestors to descendants.

In addition to the main option for how to draw a family tree, there are several more:

Personally on my own. Parents, grandparents, and other relatives act as branches. This is convenient because the whole family is indicated along the line of only one person. It will be difficult to supplement such a tree.
Family tree. In this case, relatives on the paternal or maternal side may be indicated separately, because the names of the spouses before marriage were different.

There are many sites on the Internet where you can find special family tree templates. After downloading and printing them, you just need to fill in the empty spaces with photographs of relatives according to the indicated location. It will look more neat if you use Photoshop. To do this, you need to open the template in this program and insert photos there. The recommended layout format is png. This is an extension for pictures that are very convenient to work with in Photoshop.

DIY family tree

How to draw a family tree with your own hands? To do this, it is better to divide the work into several stages. The first step is to find out about all the relatives. This is the most crucial stage, because the amount of information determines how complete the finished database will be. If you suddenly miss someone, the meaning of the tree will be partially lost. If the collection of information was successful, then it remains to choose the option of constructing the scheme - personally from yourself, from the founder of the genus, or several surnames at once.

Before drawing up your family tree, it is worth making a preliminary diagram of all relatives, distributing them according to the degree of kinship. The main thing is to decide how many generations back you plan to go. For the owners of a large family, it is better to limit themselves to the closest relatives and not to enter the great-uncles and grandmothers, otherwise it is possible to expand the family tree and make side branches in it. They will serve to record more distant relatives - cousins, sisters, grandparents.

There are a lot of concepts of kinship: in addition to blood, they reflect marital or spiritual relationship. In the first case, people have a common ancestor, in the second, they are married, and the third includes such forms of kinship as nepotism and twinning. The main thing is blood - several degrees of kinship are distinguished in it. One of them represents the generation, the chain of which already forms a line.

Such a chain includes as many degrees as there were births in the family, i.e. son or daughter - first degree, grandson or granddaughter - second, etc. Each of them must follow each other in order. It turns out that the construction proceeds through generations - from the oldest to the youngest, or vice versa, if the scheme is executed personally from oneself. On the main branch, all siblings, grandparents should be indicated, and on the side branches - cousins or second cousins. So the distance between relatives will reflect the distance of their relationship.

How to build a family tree

If a rough diagram with a list of relatives is ready, you need to decide how best to draw a family tree. There are several options here:

Classic, when the main carrier of the surname is indicated at the bottom of the trunk. In most cases, this is a married couple, for example, grandparents or great-grandmother and great-grandfather (you can go even further). Next, all their children, grandchildren and other relatives are listed in order. It is better to place your line on the main branch, i.e. the one by which you will come to your parents and specifically to yourself. The side branches will house cousins and second cousins.
Personal tree. In this version, you yourself act as the basis, i.e. family tree compiler. Next are the parents, grandparents on both lines, etc. This will be the main branch. On the side, it is worth reflecting the sisters or brothers of the parents, their children, grandchildren, etc.
Family tree. This option is the most voluminous of all. Several surnames can be reflected here at once. It is interesting for the compiler himself to trace the line of the father and mother. Before marriage, they bore different surnames, but in relation to their children, they have the same degree of kinship. For this reason, it is interesting to compose the tree so that one half of the branches reflects the relatives of the father, and the other half reflects the mother.

Find out how to find relatives by last name.

How to make a family tree in graphic editors

There are special programs for compiling a family tree. Some of them are free online services where you can order or independently fill out a blank sample with places for photos. All that remains is to add pictures, download and print, if necessary. Another option is to download a graphics editor to your computer and work in it. Among such programs are SimTree, RootsMagic, GenoPro, Family Tree Builder, GRAMPS. The Russian analogue is the "Tree of Life".

Each of the programs has a set of specific functions that help draw and then print a tree. Most of them already have templates to fill out. They represent a table with cells or a picture. Some applications even offer to attach not only photos, but also audio or video recordings. For each family member, it is proposed to fill out a questionnaire, where basic information about him is indicated, up to a description of his appearance or interesting facts from his biography.

How to draw a genealogical family tree with your own hands

You need to start with how many and what generations you plan to draw. This is necessary in order to know in advance the number of branches in the tree. After this step, use the instructions on how to draw a family tree:

Draw a thick trunk using a soft, simple pencil so that you can erase the excess.
Depending on the type of tree, write at the base of the trunk with the full name of one or more people. These can be parents, grandparents, or your child or yourself.
Next, draw twigs a little higher for the rest of the relatives. Arrange them correctly - so that each next generation is slightly higher than the previous one.
Draw as many branches as you know relatives. Take into account the size of your sheet so that all those you want to specify will fit.
After finishing the placement of all relatives, erase the extra lines, and circle the necessary ones fatter. At the end of the design, use colored pencils to brighten the drawing.

Learn how dolls are made from nylon.

Video: how to create a family tree of a family

sovets.net

How to make a family tree of a family correctly: how to work, tips, diagrams and videos

The issue of compiling the genealogical tree of the family was considered relevant at all times. However, few people try to solve it on their own. They are afraid of not knowing their genealogy, which is a big mistake. Without understanding anything in this matter, you can try to solve it. Ask why is it necessary?

First, to know the history of its kind. Secondly, it is a way to find out about all your relatives. Perhaps one of your ancestors was a great scientist, a famous politician, or just a popular person. And what is not the reason: to satisfy your curiosity. Let us consider below the solution to the question: how to correctly compose the family tree of the family.

How to create a family tree

In the era of the development of technology, making a family tree is not difficult. You need to go to the Internet, select the required program and install it on your computer. The "Tree of Life" program received good reviews, which reveals in detail the entire technology of how to correctly draw up a family tree of a family.

The tree of life program

So what's the first step? Start with yourself. Open the downloaded program for compiling a pedigree tree, enter into it data about yourself, then about your immediate environment. Supplement the entered information with photographs. It happens that there is too little known data. Then you should go to a personal meeting. If you have a voice recorder, take it with you.

The meeting should be individual, everyone should not be gathered together, this can lead to polemics, a long discussion. Unnecessary conversations, noisy arguments will only take up time, upset the nerves, make it difficult, but not help to find the answer to the question: how to correctly draw up a family tree of the family.
Start your survey with the older generation. They have a lot of knowledge. Old people will deeply plunge into the past. To use your time efficiently so as not to overwork them, make a list of questions ahead of time. As an example of a questionnaire, the following might be:

place, date of birth;
when, where did you study;
where and when they worked;
with whom they were in a marriage relationship;
how many children, their names, dates of birth;
where, when he died, if someone is no longer alive;
and so on in the same way.

If someone has skype, communication can be built using this program. This will save time. Yes, and it is not always possible to visit everyone. Carrying out communication in a chain, moving from one to another, you can find all the relatives. If some data is not enough, there is always the Internet. You just need to know about whom to look for information.

The respondents themselves can provide good help in finding all relatives. The story about the family tree should interest them, I think everyone is interested in learning how to correctly draw up the family tree of the family.

There are times when many relatives have died, then the help will be provided by the employees of the archives. You can make a request there via the Internet or go and rummage through the papers on the spot.

All information received must be carefully checked so that no error occurs, since there are many namesakes.

Genealogical tree diagram

So, the material necessary for work has been collected, you can start building a family tree diagram. When using the downloaded program, follow the suggested prompts. When you have decided to do without the help of the program, to do everything yourself, think over your work plan, the principle that you will follow.

There are several options for constructing a pedigree tree schema:

Father's line scheme

from the mother's side;
descending tree;
ascendant tree.

Upward schema

You can build a pedigree in the form of a tree or a table.

When you have thought of everything, take a Whatman paper and get to work. Place the person for whom the diagram is drawn in the center. Divide the sheet into two parts, leave the left for relatives on the father's side, the right for relatives on the mother's side. Glue a pocket or envelope under each surname, where you put notes about this person, additional photographs.

Family tree variant

When they took up the scheme along the ascending line, and the type of it was chosen in the form of a tree, then the main person will be symbolized by the trunk. Branches extend from it in different directions. The big ones are the parents, the smaller ones are the grandparents. You can put a certain person on each leaf. Fantasy when creating a tree has no boundaries. The main thing is to preserve the accuracy of the data, not to distort it.

Before starting work, you need to think carefully about everything, study this issue from all sides. Then such work will easily turn into a hobby.

SovetProst.ru

Genealogical family tree - free program

Convenient and to a certain extent free program for self-creation of a family tree. The program is integrated with its own site, which helps to search for relatives in family trees built by other users.

Every family, if you search well, will undoubtedly have a very long and interesting history. However, not everyone can remember this story. Moreover, the average person does not even remember all of his relatives.

Usually such a memory is limited to memories of grandparents (at most, about one of the great-) ... But the history of a family can stretch its roots far into the past centuries, and sometimes even millennia !!! On the basis of interest in ancestors, the science of genealogy appeared - a systematic collection of information about the origin, succession and kinship of surnames and clans. In a broader sense - the science of family ties in general.

You don't have to be a scientist to do genealogy. Today everyone can capture and trace the history of their family. To do this, you need to have some knowledge about your ancestors, a computer and one of the special programs.

Let's take the Family Tree Builder as an example. This free application allows you not only to capture your family tree, but even find your relatives by comparing the genealogical trees of other participants in the international project to which the program opens access.

The Family Tree Builder project currently competes with another international genealogy project, Family Tree Maker:

Family Tree Builder vs. Paid Family Tree Maker

The paid project has a slightly larger database, but Family Tree Builder is quickly catching up with the competitor, by providing an opportunity for each user to post information about themselves on their personal website! Thus, it can be considered not only as a separate program, but also as a kind of social network.

However, to access it, you still need to install the application, so now let's do just that.

Installing the Family Tree Builder

Open the downloaded archive and run the installer. In the first window we will be offered to choose one of 35 languages:

Select "Russian" and click "Ok", after which a standard application installation wizard will appear, in which you specify the required parameters, following the prompts.

If everything is done correctly, then at the end of the installation you will see the following window:

To continue working, we need to go through the free registration procedure on the project website. This will allow you to access features such as publishing a family tree on the Internet and finding relatives.

During the registration process, you will need to fill out several forms. The first one is mandatory:

Here you need to specify your personal data, e-mail address (serves as a login to enter the project) and a password to access your account. In the second questionnaire, you can fill in the fields with information about your place of residence, after which the registration will be completed, about which you will be informed in the window that opens.

Starting Family Tree Builder

Before starting the program directly, you will be prompted to pay for a premium account:

For more than $ 6 a month, we are offered an improved search for relatives, extended versions of the publication of family tree charts, as well as the ability to independently work with maps and tags on them. In addition, among other bonuses - the restriction on the number of entries in the family tree (on-line) is removed and the space for your family site on the Internet is increased.

However, you can do without any frills and continue using the free version of the program by clicking the appropriate link (see the screenshot above).

Program interface

And now the Family Tree Builder working window will open directly in front of us:

On first launch, the program will often give us advice on how to create a new family tree project, which will allow us to quickly get used to it. First, we need to select the item "Create a new genealogical project", and then give it a name in English (you can transliterate).

At this stage, the preparatory stage will be completed. Now the program will offer to add a family, with which the family tree will start:

To do this, click the corresponding button in the workspace and follow the prompts of the wizard that appears. In the first window, you will need to enter data about the husband and wife of the family being created:

Here, pay attention to the button with the image of a light bulb next to the item "Place". By clicking on it, you can specify the location of a particular settlement for its correct display on the world map.

After adding the first family, we will be able to specify the parents of the husband and wife, as well as the children of the given married couple. To do this, just click on the appropriate fields on the genus diagram. If you need to add other family members (brothers, sisters, etc.), then you need to select the desired option from the "Add person" list:

Pay your attention to the left panel with a list of family members. We can reflect this list in the form of a tree, distributed among individual families. This view can be useful when working with a large family tree:

Adding photos

As a matter of fact, up to this moment we worked with you in the first tab - "Tree", however, looking at the toolbar, you will find a few more additional sections. And the next one will be - "Photos":

If you created your first records using the wizard, then you have already worked on adding photos, but if not, then here you will be given such an opportunity. For each family member, you can add several photos by highlighting faces on them. And if you want, you can even create a small electronic photo album by sorting the necessary pictures in the "Album" section (panel on the left).

In addition to photos, you can also add small videos, audio recordings and documents related to a specific family member!

Search for relatives

The next button - "Matches" - allows you to check the information about all members of your family with the content of online databases for the same records, which may indicate a relationship with other network users!

Who knows, maybe you will be lucky to find your distant relatives ...

If no matches were found, try doing a more thorough search using the following button:

Here, too, everything is simple. You can try to search for all the people in the tree, which can take quite a long time, or you can search for matches for each family member separately. However, there are some requirements and restrictions on the use of this search method. The requirements include the need to dub the name and surname in Latin, as well as the availability of additional information (date of birth, place of residence, etc.) in English.

A limitation of the free version is the impossibility of viewing search results (we will only see if matches were found and how many of them).

Family tree design

A truly useful and enjoyable feature is the ability to customize your family tree:

To access this function, use the "Charts" button. By clicking it, we can select the desired type of tree, and then arrange it in accordance with our preferences. For example, here's what the ancestor graph might look like:

The finished template can be slightly (or even completely) changed using the sections "Styles" and "Options". Styles provide the ability to completely change the appearance of a family tree by choosing one of several design options. And "Parameters" allow you to customize certain decor elements in the selected style. The finished family tree can be printed or saved in JPG or PDF formats.

There is also a paid function of ordering a print of a poster, which can be presented as a souvenir to your loved ones!

If you do not need aesthetic delights, but just want to get clear information about your relatives, then you can use the "Reports" section:

For example, with the help of the item "Relationships" you can see in what relationship with which family member you are.

The next item - "Maps" - will allow you to trace all the geographical coordinates associated with your family:

And finally, the last functional button is “Publish”. This button calls up a wizard for uploading your data to the Internet with the subsequent creation of your personal family site:

On this site you can trace your entire genealogy, add media content related to your family, as well as keep a small family blog. In addition, you can visit blogs of other members of the network, as well as gain access to some entertainment features. Among the latter, it is worth noting the game "Memory" (we select pairs of photographs of our ancestors), as well as services for finding similarities with celebrities and determining who the child is more like:

Family Tree Builder Pros and Cons

The only drawback is the need for an internet connection. However, if we take into account that the number of users without access to the Internet is rapidly decreasing every year, then this circumstance can be interpreted as an advantage.

Indeed, with the tools that this program possesses, we can not only create a detailed family tree of a kind, but also search for relatives on the Internet, communicate with other network users, exchange photos and videos, and even blog.

Try to work with Family Tree Builder, and you will find that creating a family tree can be not only routine, but also very enjoyable and fun process;)

P.S. It is allowed to freely copy and cite this article, provided that an open active link to the source is indicated and the authorship of Ruslan Tertyshny is preserved.

P.P.S. Want to know the meaning of your name? Or maybe you just can't choose a name for your child? Then try this program: Name interpretation https://www.bestfree.ru/soft/obraz/nameselection.php

Can do it on its own. By the way, for reference:

Many psychologists, according to professional observations, describe those who do not know their relatives and their family history as less confident in life and, as a rule, have big internal problems. Knowledge of pedigree certainly includes knowledge of the interpretation of your surname. Still, it doesn't hurt to know in detail what is our personal identifier, what we hear every day and pass on to our children as an inheritance.

You can make a family tree of a family yourself in several ways. Of these, the most common:

The first way is to do it virtually, on a computer.
The second is to make it in reality, from a variety of materials at hand.

We will describe both methods, and start with the first.

Creation of a virtual family tree.

The second option is to create a family tree using a computer editor (photoshop, corel, paint). As an aid, you can use the article "Computer collage". And also the following sequence of actions:

We go to the Internet and look for a suitable picture with a tree for the implementation of the task. In a few days (weeks) you will find many different options, some of which will form the basis of your design creation.
Next, we methodically prepare photographs of our relatives. In this case, it is advisable to limit yourself to direct ancestors and their spouses, otherwise you will have to look for a completely different picture of the tree.
Then we place them in a tree using any graphics program in which you enjoy working. You can add inscriptions under the photos, even mark the place of birth or some historical events (for example, resettlement and connection with a noble family).
You can also stretch a timeline along the side of the tree. This will clearly show the development of the genus against the background of history. You can also add your family coat of arms (if you have already acquired one), rare family photos, a small information on the history of the family, a link to your personal website on the Internet.

Creating a real family tree

In this case, you are doing nothing more than, therefore, to improve the quality of your work, you can use the articles "Beautiful postcard in 5 minutes" and "Collage - how to do it?" Below is an example of creating a family tree from a piece of wallpaper, felt, photographs and patience. You will also need thick cardboard to fit the wallpaper, double-sided tape and glue.

The sequence for creating a real family tree is very simple:

Draw the outline of the tree (roots, trunk and branches) with soap on the felt and cut it out.
Cut a 50 x 60 cm piece from the wallpaper. Stick the cut wallpaper onto the cardboard using glue or double-sided tape.
Place the felt wood over the top and glue all thin parts of it with glue.
Cut the excess protruding parts to the size of the base. Spray your photo frames by placing them in a box with high sides to keep the area from splashing.
Frame your half finished collage. Glue green yarn (thread, felt) imitating foliage with glue to the top of the tree.
Insert pictures into frames. Place them in the middle of the collage. Place your baby photos at the top, and your grandparents at the bottom. Glue all frames to the family tree with glue.

Thus, it is very easy to prepare a family tree.

The question remains - how to fill the family tree?

Well, the simplest option is three generations:

grandparents
mom-dad
and children.

And finally, we suggest you download a small presentation (fully automatic) about the family tree. Simple and understandable (because for children) the basic terms are explained and the sequence for creating a family tree with source codes is given. Download presentation you can follow the link: family tree.

By the way, for reference:

Father-in-law is the husband's father.

The mother-in-law is the husband's mother.

Father-in-law is the wife's father.

Mother-in-law is the wife's mother.

Swat is the father of one of the spouses in relation to the parents of the other spouse.

Svatya is the mother of one of the spouses in relation to the parents of the other spouse.

The brother-in-law is the husband's brother.

The sister-in-law is the husband's sister.

Brother-in-law is the brother of his wife.

Shurich (obsolete) - the son of a brother-in-law.

The sister-in-law is the wife's sister.

Kum is the godfather in relation to the parents of the godson and to the godmother.

Kuma is the godmother in relation to the parents of the godson and to the godfather.

For more detailed reference:

Grandmother, grandmother - the mother of the father or mother, the wife of the grandfather.

Brother - each of the sons of the same parents.

The godfather brother is the godfather's son.rat cross, brother on the cross, named brother - persons who exchanged body crosses.

Bro, bro, bro, bro, brat is a cousin.

A brother is the wife of a cousin.

Bratanna is a brother's daughter, brother's niece.

Bratova is the brother's wife.

A brother-in-law is a relative in general, cousin or distant.

Bratich is a brother's son, brother's nephew.

A widow is a woman who has not entered into another marriage after the death of her husband.

A widower is a man who has not married since the death of his wife.

Grandson - the son of a daughter, a son; as well as the sons of a nephew or niece.

Granddaughter, grandson - daughter of a son, daughter; as well as the daughter of a nephew or niece.

The brother-in-law is the husband's brother.

The grandfather is the father of the mother or father.

The godfather grandfather is the godfather's father.

Dedin, grandfather is an aunt after my uncle.

Dedich is the direct heir to his grandfather.

The daughter is a female person in relation to her parents.

The named daughter is a foster child, a pupil.

Dzherich is his aunt's nephew.

Dscher is the niece of her aunt.

Uncle - assigned for the care and supervision of the child.

An uncle is a brother of a father or mother.

A wife is a married woman in relation to her husband.

The groom is the one who has conspired to his bride.

The sister-in-law, sister-in-law, and sister-in-law are the husband's sister, sometimes the brother's wife, daughter-in-law.

A son-in-law is the husband of a daughter, sister, sister-in-law.

Kum, godfather - see: Father godfather, mother godmother.

Mother is a female person in relation to her children.

Mother godmother, mother cross - the recipient of the rite of baptism.

The named mother is a mother to a foster child, a foster child.

A dairy mother is a nurse, a nurse.

The planted mother is a woman who replaces the groom's own mother at the wedding.

The stepmother is the father's other wife, a stepmother.

A husband is a married man in relation to his wife.

The daughter-in-law is the wife of the son.

The father is a male person in relation to his children.

The godfather is the recipient of the font.

A named father is a father to a foster child, a foster child.

The father is deserted, the father is planted, the father is dressed up - the person acting instead of his own Father at the wedding.

The stage director is the eldest in the generation.

The stepfather is the other husband of the mother, the stepfather.

Father-in-law, stepfather - son, heir.

Stepdaughter is a daughter from a different marriage in relation to a step-parent.

The stepson is a step-son of one of the spouses.

A nephew is the son of a brother or sister.

A niece is the daughter of a brother or sister.

A tribe is a relative, a relative.

The progenitors are the first known couple by genealogy, from which the clan originates.

Ancestor is the parent of a great-great-grandfather, great-great-grandmother.

The ancestor is the first known representative of the genus, from which the genealogy is conducted.

Matchmaker, matchmaker - parents of young people and their relatives in relation to each other.

Father-in-law is the husband's father.

The mother-in-law is the husband's mother.

In-law - a person who is related by husband, wife.

In-laws are persons married to two sisters.

Cousins-in-law - persons married to cousins.

The sister is the daughter of the same parents.

A sister is a cousin, the daughter of a mother's or father's sister.

Sister, sister, sister - cousin.

Sister, sister - the son of a sister of a mother or father, a nephew by a sister.

Daughter-in-law, son-in-law - son's wife, daughter-in-law.

The mother-in-law is the wife of a brother-in-law, the wives of two brothers in relation to each other, a daughter-in-law.

The spouse is the husband.

The spouse is the wife.

The son is a male person in relation to his parents.

The godfather son (godson) is a male person in relation to the recipient.

The named son is a foster child, a foster child.

Father-in-law is the wife's father.

Aunt, aunt is the sister of the father or mother.

Mother-in-law is the wife's mother.

Brother-in-law is the brother of his wife.

Grandchild, grandchild - about kinship originating from the third generation (also second cousin) or even further.

Cousin - about the relationship originating from the second tribe.

Bloodline - about kinship within the same family.

Homogeneous - about descent from one father.

One uterine - about descent from one mother.

Fullbred - about descent from the same parents.

Pra is a prefix denoting kinship in a distant ascending or descending order.

Married - about descent from the same parents, but born before marriage, and then recognized.

Native - about descent from the same parents.

Consolidated - about descent from different parents.

Adopted - a male person in relation to the adoptive parents.

Adopted is a female person in relation to adoptive parents.

Genealogy (genealogy) programs

Overview of programs for building family trees

Tree of life- Multilingual interface. A computer program for building family trees, storing and displaying information about people and about events in their lives. The program is easy to use, even children use it. At the same time, the Tree of Life has ample opportunities: it automatically builds family trees for any person, contains an event mechanism that allows you to create complex biographies, allows you to store multimedia data, has the ability to search, sort and filter data, and obtain statistics. In my opinion, the most user-friendly program.

Genealogy- This is a fully functional program for building, storing, editing and replenishing your genealogical information. The program is easy to use even for an inexperienced computer user, has an intuitive interface and at the same time has enormous capabilities. "Genealogy" is the first genealogical program that takes into account Russian genealogical features, namely, the presence of a patronymic! My first paid program, but still gave preference to "Tree of Life".

Ages-Family Tree Database- There is a Russian interface language. Well thought out, easy to use, with a lot of data to be entered. Her graphical reports are especially good in her: very visual, well-composed. But ... in the unregistered (free) version, it allows entering no more than 50 people into the database. Creates data immediately in GEDCOM format.

Brother's Keeper- There is a Russian interface language. With its somewhat archaic form, reminiscent of the design of DOS programs, it is quite convenient to work with. The unregistered version has some limitations. Allows to convert data to / from GEDCOM format.

GenoPro- There is a Russian interface language. The program is convenient and simple. GenoPro makes it possible to build a family tree with a few clicks. With just a double click on a person's icon, you can add as much detailed information as you like, including professional data, education, contact information, locations and unlimited images to each property.

GeneWeb- There is a Russian interface language. It is a system for publishing genealogical data on the Internet. It can also be used locally (offline) like a regular genealogy program. The program offers very effective methods for calculating relationships and consanguinity, can communicate in several languages and can work either in conjunction with an existing Web server (CGI), or separately using its own internal server.

Legacy family tree- There is no Russian-language interface. A very sophisticated program with many functions. Currently distributed free of charge. It had two main drawbacks: a large distribution kit and problems with displaying Russian fonts. Allows to convert data to / from GEDCOM format.

Family tree builder- Best Free Genealogy Software in the World.
Interesting to use. Support for 35 languages. Cards. Smart Matching ™ technology. Personal family site. Great for family photos. Automatic designation of faces. Easy to use interface. Charts you can be proud of. Search Smart Research ™.