What is the difference between a haircut with hot scissors and a regular one. Hot scissors - what is it? Haircut with hot scissors before and after

13.05.2019

Thermo-cut is performed with electric scissors with heated blades, the temperature of which is regulated according to the type of hair. The thicker the hair, the higher the degree is set on the thermostat, the thinner - the lower.

Note! Due to the high temperatures, the tip of the hair is sealed. This prevents breakage and splitting for a long time.

Of everything exists 2 types of thermal haircuts:

Tip care- dry and split ends are cut off, while the length remains intact. It is carried out on dry and clean hair.
Full haircut- model haircut. Carried out on wet strands.

History of origin

Hair cutting with hot scissors was carried out in ancient Egypt. Of course, in the absence of electricity, the process was more time consuming and time consuming. The barber had to heat the blades over an open flame, and then cut off the hairs with quick and precise movements. One procedure took several hours.

They used a similar method in Ancient Russia - the girl loosened her hair, twisted tight flagella and cut off the fluff that was knocked out, having previously heated the blades of the scissors on the stove. There is an opinion that it was this procedure that helped Russian beauties to preserve the natural density and beauty of their curls.

Reference! The first real hot scissors were created by the German company Jaguar - it was a rather bulky electronic device consisting of scissors, a cord and a power supply.

Over time, the device became more and more miniature and comfortable to use, and thanks to the introduction of computer diagnostics, temperature control has become much easier.

Haircut with hot scissors pros and cons

The procedure has both positive and negative sides, we will consider them in more detail:

pros

Thicker & Stronger Hair- if you cut your hair regularly.
The loss stops- hair without kinks is well nourished and does not fall out.
Cutting is prevented - the tip is sealed and does not delaminate in the future.

Minuses

Takes much time- each strand is processed by the master separately. It takes hours to remove all split ends.
Expensive- the procedure is more expensive than a classic haircut.

What are hot scissors?

Hot scissors are an electric appliance with heated blades and a protective thermal pad on the handles. The device is safe for both the hairdresser and his client. Due to the temperature effect, splitting is prevented and the protective layer of the hair is compacted.

Haircut with hot scissors before and after

Even if you have naturally curly and porous hair prone to sectioning, then after the first procedure you will notice significant changes:

The fluff will disappear along the length.
The split ends will disappear.
The curls will become softer to the touch.
The entanglement problem will be resolved.

Features of operation

Hair shafts are classified into 3 types - thin and weakened, normal healthy, and thick and tough. Depending on what type of hair the client belongs to, the master chooses the temperature regime.

For thin hair - from 80 to 110 degrees.
For normal - 130 to 150 degrees.
For thick and hard - 150 degrees.

Security

The use of modern hot scissors completely eliminates the possibility of scalp burns and injuries. Absolute safety is achieved thanks to a special edged protection made of heat-insulating materials - only the cutting parts remain hot.

Types of hot scissors

Thermal scissors can be divided into 2 types:

Indications and contraindications

A hot haircut is indicated for the following hair problems:

Tendency to cut- most often it is characteristic of porous, curly and dyed curls.
Brittleness and dehydration- the problem of dyed and previously bleached hair.
Dropping out- A haircut can only help prevent hair loss if it is due to improper care. First of all, you should consult a trichologist.
Dullness and weakness - numerous stains, breaks along the length, washing with aggressive agents - all this leads to washing out and muffling of the color pigment .

Despite the fact that the procedure is aimed at improving the health of the hair, it is not recommended if your hair:

Healthy and dense- you won't see much difference between a regular haircut and a hot one, but you will spend 2 times more money.
Lightened and not filled with pigment (not painted on top) in this case, the procedure may be counterproductive.

Important! You shouldn't do your own haircut with hot scissors if you don't have such experience!

Hot scissors cutting technology

The thermal haircut procedure is carried out in several stages:

Computer diagnostics- using a computer, the hairdresser determines the structure, thickness and degree of damage to the hair shaft. This is necessary for more accurate temperature control. In addition, knowing all the data about the hair, the master will be able to choose the optimal care products for you.
Harnesses- the hairdresser carefully combes the hair, sprinkles it with water (if it is a full haircut) and cuts off the protruding split ends.
Shaping your hair- this step can be skipped if only the section is to be trimmed.

Haircut with hot scissors at home

If you have a few hours of free time and, most importantly, work experience, you can try doing a haircut at home. To do this, you will need:

electric scissors;
peignoir;
mirrors (if your hair does not reach the shoulder blades) - to control your actions from behind.
spray gun - for a complete haircut.

The actions are the same as in the hairdresser:

Preheat the scissors to the required temperature- as a rule, it takes no more than a minute to warm up the blades.
Comb your hair and divide it into sections with elastic bands- so it will be more convenient for you to control the progress of work.
Select one strand and twist into a flagellum- you will immediately see the split ends among the stray hairs. Cut them off. Then twist the tourniquet in the opposite direction and repeat the action. After there are no split ends on the flagellum, go to the next strand.
Turn off the heat scissors- after the haircut is over, turn off and then unplug the device from the socket. Let the blades cool and then put them in the box.
Wash your hair with a moisturizing shampoo and conditioner, lay in the usual way using thermal protection.

Note! Cut hairs can tingle and be uncomfortable, so always wear a negligee and shower after cutting.

The cost of services in the salons of Moscow

Average price tag in Moscow for the service of a haircut with hot scissors starts from 1 thousand rubles.

The cost varies depending on the location of the salon, its reputation, the qualifications of the hairdresser and the length of the hair.

Hair care after thermal cutting

After thermal cutting, the hair does not require any special care, however, hairdressers advise adhering to the following recommendations:

Don't sleep with a wet head- it destroys the natural protective layer of the hair, reveals scales and dehydrates. If you need to wash your hair at night, do it a few hours before going to bed, or dry your curls with a hairdryer in cold air mode.
Wash your hair with filtered water only.- the softer the water, the longer the hair will remain strong and healthy.
Use makeup that suits your hair type.
Eat right- make sure that you have enough calcium-rich foods in your diet. Take nutritional supplements as needed.

Similar procedures in beauty salons

Conventional analogues of haircuts with hot scissors include:

pyrophoresis (haircut by fire);
hair polishing;
lamination and biolamination.

Tired of fighting split ends? And you don't need to! To forget about this annoying problem will help a haircut with hot scissors - a salon procedure that combines cosmetic and therapeutic effects. Having made a hot haircut, you will kill two birds with one stone at once: you will become the owner of a fashionable haircut and make your hair healthier. Such a double pleasure will cost a lot, but the result is worth it! Many women who have already managed to use this unique procedure note its beneficial effect: hair splits and falls out less, it gains volume, becomes more obedient and keeps styling longer.

What is a "hot scissor haircut"

Cutting with ordinary mechanical scissors injures the hair, disrupting its natural structure: the ends become porous, and the hair is vulnerable to the harmful effects of the environment. If you look at such hair under a microscope, you can see the torn, shaggy ends, reminiscent of a brush. Of course, a haircut is not always the cause of brittle, dull hair with split ends, but nevertheless, this factor should not be underestimated either.

to the table of contents

Effect on hair structure

When using hot scissors, each hair on the cut is melted and sealed, which allows you to maintain its shape and structure. How does this happen? The master makes a cut with heated scissors blades, the keratin mass immediately hardens and each hair is sealed - the tip is closed and protected, the hair does not lose moisture and nutrients. After the first hot haircut, the hair will become more elastic, voluminous and stronger. However, for the maximum healing effect, at least two or three procedures will be required. The optimal effect occurs after the fourth or fifth procedure. Due to the increase in internal pressure during cutting, the hair along the entire length becomes the same thickness and acquires double volume. During the hot cut, due to the thermal conductivity of the hair shaft, the cells of the growth zone are stimulated, which contributes to more active growth and regeneration of hair. After using ordinary scissors, the hair, as a rule, begins to be cut in a month and a half, and after a hot cut no earlier than 3-4 months! The difference is obvious!

The temperature regime for cutting with hot scissors is set individually, taking into account the type, length and condition of the hair. This procedure has no contraindications. On the contrary, experts advise performing a thermal cut for both treatment and prophylactic purposes. A hot haircut is recommended even after perming and dyeing your hair. However, you should only trust your hair in the hands of a real master who owns all the intricacies of the process. Due to the high cost of professional equipment and training of specialists, a thermal cut simply cannot be cheap. That is why not every salon provides this service. On average, prices for haircuts with hot scissors in different salons range from $ 25 to $ 55. It is not worth deceiving yourself with "profitable" offers: a haircut with a cheap Chinese analogue of hot scissors, and even a self-taught amateur, can end very badly.

to the table of contents

How are hot scissors different from ordinary scissors?

Hot scissors look exactly like traditional mechanical ones, only metal and all heating parts are hidden under special thermal pads. They are also equipped with a minicomputer, which allows you to set and maintain the temperature at the required level, and a battery. The heating temperature of the device is determined by the type of hair: for thin and light, as a rule, a lower temperature regime is required than for thick and dark. A more maneuverable tool is a hot razor, used to create model haircuts. Hot scissors can be used as the main stylist's tool, or as a medical device. In the first case, a haircut from start to finish is created "hot". In the second case, wet hair is given the desired shape and length with ordinary scissors, then the hair is dried, divided into strands, twisted into flagella, and only after that the ends are processed by the “hot method”.

to the table of contents

Hot haircut procedure

Haircut with hot scissors requires maximum concentration of attention and dedication from the master, this is a painstaking robot that does not tolerate haste and takes at least an hour! In the case of thick, curly hair, as well as in a deplorable state of hair, it can drag on for three hours. This is not the case when you can transform in 10-15 minutes, so you have to be patient and allocate your favorite not only a certain amount, but also an hour or two of free time. Aren't we worthy of this?

Before you decide on a hot haircut, inquire about the salon, read customer reviews. Believe me, you can ruin your hair in an elite salon. Quality assurance is a high level of qualifications of the master, significant work experience and professional tools from the world's leading manufacturers. The undisputed leader in the production of hot scissors is the German company Jaguar, which was the first to introduce this product on the market, making a real revolution in the world of hairdressing.

In high-level salons, before performing a thermal cut, you may be offered to undergo computer diagnostics of hair on a special apparatus that resembles a conventional ultrasound scan. This step is optional, but desirable. It gives the master the opportunity to identify the most vulnerable areas and determine the optimal temperature regime.

After giving the hairstyle the desired shape, the master divides the hair into strands and twists them into tight flagella. The "naked" ends are processed with hot scissors. The blades can heat up to 180 degrees, but since only the cutting surface heats up, the likelihood of burns to the scalp, neck or hands of the master is practically excluded.

Hot scissors should also be used to give the final shape to the hairstyle, especially since they allow you to perform the full range of manipulations available to conventional scissors. If you are offered to trim the strands or make a thinning of the bangs with mechanical scissors, then you have come to a layman. Without "sealed" ends, the procedure loses all meaning. Similar incidents can arise in salons that have decided to save money on the purchase of hot thinning scissors or a hot razor to shape model haircuts.

to the table of contents

How often can I get a thermal cut?

A haircut with hot scissors is absolutely harmless and even useful for the hair, so it can be safely done at every visit to the hairdresser. Women who dream of growing luxurious long hair without split ends are advised to cut their hair at least once a month to activate growth, and to everyone else as needed. The "hot method" is especially useful for dyed, highlighted, colored hair, as well as for hair weakened by perm, ultraviolet light, styling products, frequent use of a hair dryer and irons. Stylists advise doing a thermal cut not before, but after dyeing or curling, in order to heal the hair by removing the ends dried with paint and chemical compounds.

by The Wild Mistress's Notes

What can they not invent to decorate our women ?! And all kinds of cosmetics in the service of beauty, and new techniques, tools and technologies. So the hot scissors haircut has become popular, although not everyone knows what its advantage is.

Hot scissors - what is it?

First, let's figure out what hot scissors are. They look like ordinary ones, only the metal in them is hidden under plastic, and the scissors themselves are included in the network.

The selection of the optimal temperature for thermal cutting is monitored by a mini-computer. When the scissors come into contact with the hair, this mini-computer detects hair structure, type and degree of damage. And already with this in mind, the master sets the desired heating temperature for the scissors.

The temperature of the scissors reaches 180 ° C, but burns do not threaten either the hairdresser or the client, since at the very moment of cutting the scissors remain slightly warm, and the main heating to the required temperature occurs only at the point of hair cutting.

The benefits of cutting with hot scissors

Hot scissors not only cut but also seal the ends of the hair. This reliably protects your hair from harmful external influences. As a result of such a haircut, the hair splits less and breathes better.

As a preventive measure, you can cut any hair with a hot method. But such a haircut is especially useful for long, split ends, as well as weakened from frequent dyeing or perm. The very first procedure will improve the appearance of the hair, and the therapeutic effect can be expected after 2-3 visits to the hairdresser.

Where can you get a haircut with hot scissors?

It is important to know that inept use of hot scissors or the wrong regimen can harm your hair. Therefore, deciding on such a haircut, be sure to choose a good salon and, most importantly, an experienced hairdresser with the necessary qualifications.

And, for information, remember that the correct technology is that the master first twists the strands of hair into bundles and only then cuts off the ends. And the final shape of the hairstyle is also given with hot scissors, and thinning with an ordinary device is not allowed.

Today, a haircut with hot scissors is one of the newest procedures in a beauty salon. Its particular value, which makes it so popular, is that this procedure has a healing effect.

Haircut with hot scissors: benefits for hair

Already after the first haircut with hot scissors, the effect is noticeable: hair does not split long enough. Thanks to this procedure, the cut of each hair is sealed, the cut is smooth, due to this, moisture and useful substances such as proteins, amino acids, vitamins are retained inside the hair shaft, strengthen it, while stimulating hair self-regeneration. In addition, cutting with hot scissors for 2 months protects the hair from external factors.

After the procedure, the hair becomes shiny, become strong and elastic, so the new hairstyle keeps its shape longer.

In order to consolidate the therapeutic effect, the procedure must be repeated at least 2-3 times. Hairdressers guarantee that after 2-3 haircuts, you will get rid of the problem of split ends.

After 4-5 haircuts, the effect will surpass all expectations: hair will be twice as thick as it was before. The fact is that after processing the hair with hot scissors, the thickness of the hair from root to tip will become the same, because the internal pressure inside the hair will increase.

What to expect from a haircut with hot scissors?

Repetition of the procedure regularly makes the hair even thicker., and they will stop falling out.
Very often, a haircut with hot scissors is used both for prophylaxis and for treating weak or long hair that often splits. Short hair after this procedure is easier to style, and if you apply the procedure regularly, it grows better.
This procedure is very useful for treating weakened hair. directly after a perm or dyeing. This will heal the hair and cut the ends dried during the dyeing or curling process.
In the course of a regular haircut, the ends of the hair are also renewed, however, the hair section remains open, while the scales split, leaving the hair defenseless against environmental factors - styling products, chemicals, salts, gases that are contained in air and water. Hair becomes dull and brittle over time.

How is a haircut done with hot scissors?

The haircut itself is performed with hot scissors, the blades of which are heated to a certain temperature. In appearance, they are similar to ordinary scissors, but the metal is hidden under a plastic frame. During cutting, the temperature of the blades is constantly maintained by the master at the desired level, selected in accordance with the type of hair. So, if the hair is weakened as a result of multiple dyes, perms, or the hair itself is thin, the temperature is not too high, while when working with thick or curly hair, it is slightly higher.

In addition to "hot scissors", the salon can offer you "hot razors" designed to create a creative haircut. The healing effect of using a "hot razor" is similar to that of "hot scissors".

The "tool" in the hands of an experienced craftsman allows him to make various modern haircuts, which can be done with ordinary scissors. Moreover, a specialist can perform work both on wet hair and on dry hair. A properly done haircut does not melt or glue the hair.

Before making a haircut, an experienced master should assign you a computer diagnostics of the hair. On the monitor screen you will see the internal structure of your hair, on the basis of which the master can obtain reliable, complete information about the condition of the hair.

How long does a haircut with hot scissors take?

Prepare that the procedure will take a long time. Hair just below the shoulders will take at least an hour and a half. By twisting the hair into flagella, the hairdresser cuts off the protruding sides of the hair. After that, carefully examining the strand, the existing uncut split ends are sheared. Then, having shaped the hair with "hot scissors", the master will do the styling.

Despite the fact that the master seemed to cut a lot of hair, their length will change slightly (unless, of course, you do not ask the hairdresser for this).

How often should you cut with hot scissors?

Experts advise to repeat the haircut 3 times with a time interval of one month. Then, a haircut once every four months will be sufficient.

Here are some important rules for a professionally executed haircut with hot scissors:

The duration of the haircut should not be less than an hour. Cutting off the split ends is a painstaking job that takes a lot of time.
The correct cutting technology necessarily implies curling the hair into bundles, and then cutting the ends.
The main haircut should also be done with hot scissors. A true professional will not offer you to profile your hair with ordinary scissors. Then the whole procedure can go down the drain, because hot scissors sealed during a haircut will simply be cut with ordinary scissors. To shape the hair, the master can use a special hot razor.
A real professional should perform a haircut with hot scissors., who has rich experience with working with iron scissors, otherwise, a little overheating of the device, the hair can be damaged.
The first developer and manufacturer of hot scissors was the German company Jaguar. The products of this company are of the highest quality. Therefore, it is preferable that the master works with hot scissors from this manufacturer.

Hot scissors haircut is a modern, progressive way to preserve and even improve the appearance of your hair.

There are procedures in the field of hair care services that seem to seem quite understandable: the names are not complicated, the essence is clear in general terms, but not many decide on them - some do not have enough information about the procedure, others are afraid to ruin their curls, and still others confused by the high price. One of these incomprehensible procedures was haircut with hot scissors... From the name you can understand that this is a simple haircut, but the hair is cut with some kind of hot scissors. The difference is only in the temperature of the scissors! Is it really so important and has any effect ?! Is it worth overpaying 5 times more for this than for a regular haircut ?! Let's figure it out.

First, let's figure out the procedure itself and what the salons themselves, the masters and the women who tried it say about it.

What is a hot scissor haircut?

A thermal cut or a haircut with hot scissors is, in principle, almost an ordinary haircut, but instead of simple scissors, unusual ones are used - electric and the technology is slightly different (haircut with flagella). One of the important points in a thermal haircut is what electric scissors are used and the skill of a specialist in using them.

The scissors themselves are similar to simple ones, but thicker and have an electrical wire. The blades are made in the form of plates, which are heated (90-160 ° C), more precisely, only a small area that is in contact with the hair is heated. When cutting, the master can adjust the temperature of the plates depending on the type of hair.

Thin hair- 110 - 130˚С, thin and colored - 80 - 90˚С;
normal - 130 - 150˚С, painted or with chemistry - 90˚С;
thick hair-150˚С, damaged, after staining - 110˚С.

Share 2 types of thermal haircuts: trimming the ends and trimming the flagella.

1. Tips

Only the ends are trimmed. Fast and inexpensive.

2. Flagella

Complete and complex haircut. Small strands are twisted into flagella and shaken - the cut hairs will come out. Only damaged hairs are cut off, and then they are sealed along the entire length. This process is incredibly laborious and very long (from an hour to three).

What Happens When Cutting With Hot Scissors?

After a simple cut with scissors, the hair section remains open (often split) and is exposed to the environment on the inside of the hair until a natural blockage occurs (a plug forms).

When cutting with hot scissors, the cut is immediately sealed (an artificial cork is formed), preventing harmful substances from penetrating into the hairs, useful substances to be washed out from there and increased moisture evaporation.

Who is it suitable for?

In principle, everyone: the type of hair and structure is not important, the strands can be dyed, the length can also be any.

If you do not want the hair length to decrease greatly during the haircut (especially if you are growing it out), then a haircut with hot scissors is for you. In the process of a regular haircut, the cut ends must be cut, and this is often 5 centimeters. almost the entire length is preserved.

The positive effect of thermal cutting

removal of cuttings, even in the most severe cases;
improving the appearance;
additional volume;
each hair becomes thicker or of the same thickness from root to tip;
strands become more obedient and pliable, styling is easier;
increased hair growth;
reduction of loss.

The effect is noticeable after the first haircut (about 60% of the cut ends are trimmed), but about 5 procedures should be done to fix and achieve even greater results. The result of 3 months lasts (with a normal haircut, after one month, it already starts to chop).

The slit is removed by soldering the ends during the cutting process (hot scissors melt the cut at the time of cutting). The volume increases due to the fact that each hair will not become narrower to the tip, but will retain its thickness. The aesthetic appearance of the hair is also improved - they look healthier, more well-groomed, and become more pleasant to the touch.

Advantages and disadvantages

The pluses include the following:

Healing (as hairdressers call it) effect for hair
Just one procedure is enough for the effect to be noticeable
Increase in volume

The disadvantages include the following:

By time - long; labor-intensive - labor-intensive
There is a high probability of hair damage (mainly due to the lack of experience and incompetence of the master)

About the price

The cost of the procedure varies greatly. Just trim the ends in one cut - about 400 rubles. (economy), but the entire haircut can cost a more round amount - from 1200 to 3-4 thousand rubles.

before the procedure, be sure to ask whether the master was trained in the use of thermal scissors and what kind of experience he has;
the highest quality and professional scissors are considered Jaguar (Jaguar);
before the procedure, you should conduct a study of your hair, according to the results of which the recovery rate and the temperature of the sheets of hot scissors will be determined;
haircut is done on dry strands;
too fast procedure (less than an hour), as well as the technology of performing the procedure (not with flagella), should alert you and make you doubt the competence of the master;
at the final stage of the haircut, when correcting the shape, hot scissors are also used, in no case ordinary scissors;
It is not recommended to carry out this procedure at home - it is difficult to choose the right temperature for the scissors, you can ruin your hair very badly;
if you have to paint, then first do it, and then you can do a thermal cut.

In especially difficult cases (strong fragility and excessive dryness of the curls), thermal haircut is used more as a consolidation of the results obtained, during treatment and after determination.

Having dealt with the procedure itself, its pros and cons, some features, I would very much like to know, and most importantly, is it really that effective? How long does the result last? Is it worth overpaying?

According to reviews women who have tried this procedure, nevertheless, its effectiveness is greatly exaggerated. Of course, there are those whom she helped a lot and they are absolutely satisfied, this is most likely due to the fact that the cut was small and the master did everything right. In principle, 20 percent of the results are satisfied, but later they admit that although the effect was, it did not last for the declared 3 months, and it is expensive to do such a haircut every month.

About 60% recognize the procedure as ineffective and admit that they were persuaded to carry out this haircut in the salon or they were strongly inspired by positive reviews on the Internet. And most likely it is very similar to another marketing ploy!

Here the master hairdresser explains well the whole essence of haircuts with hot scissors and dispels a lot of myths: