Light women's knitted jumpers with their own hands. We knit a jumper, sweater, pullover. MK with description, diagrams and video

Instruction

Whatever you knit, always start with a control sample. A small rectangle or square will help you avoid many mistakes and therefore rework. It will be seen from the sample whether the size of the needles corresponds to the thickness of the selected yarn and whether they are suitable for this pattern.

Stretch the resulting sample slightly and measure with a centimeter tape. Count the number of loops and divide it by the width of the sample. Multiply the resulting number of loops in one centimeter by the measure of the part you are going to knit (the value is indicated on the pattern), or make a calculation according to your measurements.

To knit the back, dial the required number of loops on the knitting needles, according to your calculations. Knit in 1x1 rib (alternate knit and purl) for 5 cm. Then go to the knitting needles No. 7. Knit the fabric straight 65–79 cm, close the loops.

Knit in front in the same way as the back, only knit the neckline. To do this, after 60 centimeters from the beginning of knitting, close 10 loops in the middle and knit each side separately. Dec for rounding in every second row 5, 3 and three times 2 loops. Close the remaining shoulder loops after 65-70 cm from the beginning of knitting.

Next, start knitting the sleeves. Cast on about 40 stitches on needles No. 6 and knit with a 1x1 elastic band. After 3-4 cm from the beginning of knitting, switch to needles No. 7 and knit with front stitch. For the bevels of the sleeves, add one loop in every sixth row. Cast off all stitches after 50-55 cm from the beginning of knitting.

Pin all the details to the pattern with safety pins, moisten and let them dry flat on a horizontal surface. Complete all seams. Sew sleeves into armholes.

Pick up sts around the neckline on circular needles and work in rib 1x1 for the desired hem length. The golf collar is knitted in the same way. The facing can also be knitted separately and sewn by hand with a stitch seam to the neckline.

Useful advice

A simple sweater will be more effective if knitted from melange yarn.

Sources:

  • Knitting patterns for women's sweaters and pullovers
  • knitting simple sweaters

You can please your loved one with a gift without any special financial expenses. Knit a natural wool sweater for him, and he will warm him in the cold no worse than your love.

You will need

  • Needles №4, 4.5, 5, 5.5
  • Wool weight - 700g (for size 44-46)

Instruction

Cast on 76 stitches and work 5cm in rib 1*1.

On 62 cm to form a line of the bevel of the shoulder, fasten on each side 2 times 7 and 1 time 6 loops through the row.

Cast on 76 stitches and work in rib 5cm 1*1. Increase in one row 21 loops: 10 times every 4 loops and 11 times every 3 loops.

To cut the neckline from the middle of the front, fasten 3,2,5 times 1 loop through the row. Simultaneously with knitting the neckline at 62 cm, fasten 2 times 8 and 1 time 9 loops through a row to form a shoulder bevel line.

Cast on 37 stitches and work 5cm in rib 1*1.

Work 40cm in stocking st, inc every 3cm 1 st on each side.

At 46 cm, to form the head of the sleeve, fasten 5,4,8 times one loop. Then 2,3,4 loops on each side through the row. Fasten the remaining loops in one row.

Knit the second sleeve by analogy with the first.

Sew shoulder and side seams.

Cast on 100 sts around the circumference of the neck and work 12cm in rib 1*1. When knitting, change the diameter of the needles.

Related videos

Shops offer a great variety of goods, but as they say, the best gift is the one made with your own hands. Knit a sweater with your own hands. No one will have this for sure except its owner.

Instruction

Of course, you first need to decide on the style. There are many patterns for knitting, they can be found both in printed publications and. In such schemes, the flow rate is usually indicated. The choice of yarn in modern stores does not limit even the most violent fantasy.

For work, we need knitting needles and yarn. Properly selected knitting needles will give you a lot of pleasure and will not discourage you from knitting further. Here are the general principles for choosing knitting needles. You need to pay attention to the fact that their tip is not too sharp, because you can not only damage the yarn, but also get hurt. Also, the knitting needles should not be too heavy and should lie comfortably in. Their surface should be smooth so that the loops are easy to knit and do not remain on the yarn. Some knitting patterns indicate how to knit.

Before starting work, it would be nice to do a little gymnastics for the hands to disperse the blood and improve motor skills a little. Don't forget about eye health. You need to take care of good lighting. It is better to start knitting from or back. Well, then it's a matter of patience and perseverance. Approach the matter with love, and you will succeed.

Related videos

Useful advice

If you still don't know how to knit at all, knit something simpler than a sweater to start with. The time of sweaters will come with experience.

You have learned how to make the first typesetting row, you know how to knit front and back loops. So why not try knitting something. For starters it might be simple pullover connected in a circle. Any novice knitter will cope with this task without much effort. A pleasant pastime for several evenings is guaranteed to you. You just need to have a little patience. And, in addition, in this way it is possible to connect pullover and for women, and for men, and for children.

You will need

  • yarn, circular needles, knitting marker

Instruction

Before you start knitting, make a sample with which you can calculate the required number of loops and knitting density. Tie a square 10 * 10 cm and count the number of loops in 1 cm. Then multiply the number of loops by yours. For example, in 1 cm - 2 loops, the circumference of the hips (or waist), depending on the length a, 100 cm. Therefore, to start knitting in the round, you will need to dial 200 loops. So, you have calculated the required number of loops, now you can start knitting pullover a.

Unwind from the required amount of thread. Make a set. Wrap the thread around your thumb and place it over your index finger. Then hold both ends of the thread in your left palm. Insert the needle into the loop on the thumb, pick up the thread on the index finger, and pull the thread into the loop on the thumb.

When you have collected all the loops for the shelf, connect them in a circle. To know where the beginning of the circle is, hang a marker, it can be a pin or a contrasting color. Start with a 1*1 elastic band. Knit 1 st and purl 1, continue in the round. Check if the hinges are not twisted, otherwise problems may arise.

After knitting the required length of the elastic band, make an increase. If the increase is on the purl loops, then it will be almost imperceptible. Take a loop from the previous row, put it on the knitting needle and knit as usual.
Knit in the round in front and back to underarms.

Set aside a few stitches for the armholes before you start knitting the yoke. To do this, use a thread of a different color or a pin. Then connect these loops with the loops on. Slip off the last loops to the end of the circle, and the first loops after the beginning of the circle and tie off the thread. These loops will wait in the wings.

Now start knitting sleeves pullover a. The set for the sleeves is the same as for the front and back. The only one in size and increase in loops. Increase at the end before the last stitch of each row. Insert the left needle under the loop in the previous row and put it on the knitting needle, knit it with the front loop behind the front wall. Thus, you will get the correct increase in the row, knit the last loop of the row. Throw a marker and knit the first loop of the row. Now put the left needle under the loop in the previous row and put it on the knitting needle, knit it with the front loop behind the back wall. Thus, the left side will increase. If you look at the increments, the loops will be in opposite directions. When you knit the front and back, and both sleeves, connect them into one piece on one needle, continuing to knit the yoke.

Position the sleeves on the sides of the shelves. The removed loops are placed right side together, and they will remain so until you connect them together at the very end of the work.

Knit the first loop tightly so that there are no holes. Then knit the loops of the sleeves on a knitting needle with a shelf. Now I move to the loops on the back and attach the second sleeve in the same way. Now this detail has become really very large. But if you want, you can make it less voluminous by inserting the sleeves inside the shelves.

It's time to knit the neckline. Here it is extremely important to knit freely in order to pullover could easily be worn over the head. There are several ways to do this. One of them is called "closing the edge with pulling the loop." Knit the first loop, then yarn over, knit the next loop, remove it and pull it through the knitted and yarn over, one loop should remain on the knitting needle. Knit the next and do the same. Thus, you will get an elastic edge.

In conclusion, it remains only to remove a few ends and sleeves. It is important to use a needle with a rounded end so as not to split the wool fibers. We introduce a needle with the ends of the thread on the reverse side under the pattern. Then bring the end to the front side and cut. It remains to connect the sleeve and the shelf. Sew the loops of the armhole with a knit stitch and fasten the threads. Your pullover ready.

Initially, long socks to the knee or short stockings with an elastic band for sports were considered golfs. However, in the 1960s knee socks have become a fashionable women's accessory and today you can find models up to the middle of the thigh. Golfs are exactly the trend that never leaves the catwalks for a long time. At the shows of autumn-winter and spring collections, designers combine knee socks different textures with a variety of things: sports, casual and even classic. BUT knee socks connected with an openwork pattern look very beautiful, stylish and romantic.

You will need

  • 250 g cotton yarn, 5 knitting needles No. 1 and No. 1.5

Instruction

In order to know exactly the required number of loops for the set, knit 10 * 10 cm and determine how many loops in 1 cm, then multiply the leg volume by the number of loops in one centimeter. There should be 32 loops in the sample. For example, the circumference of the leg is 35 cm, therefore: 35x32: 10 \u003d 112 loops. You should also check if the number of loops cast on is divisible by the width of the golf pattern. If you use several patterns for knitting knee-highs, then you should check whether the loops of all patterns are divisible by the total number of loops. For example, the motif "herringbone" is divided by 8, 112 divided by 8, we get 14 motifs; the motive "rhombuses" is divided by 16, therefore, 7 motives are obtained. The main motive is divided into 36, for a total of 3 motives and 4 extra loops, these 4 loops in the purl strip will need to be reduced by tying them together with purl loops.

Cast on the required number of stitches on the needles. Divide them evenly among four needles. It is difficult to reduce a large pattern at the ankle, so knit the first row and start at No. 1.5. Using these needles, knit an eraser and once the entire large pattern, this will be 96 rows, then go to thinner knitting needles No. 1. But, nevertheless, an eraser or can still stretch when worn. If you add a thin elastic band to the thread, then the eraser will not lose its shape and will hold firmly on the leg. Next, switch to thin needles and knit another 96 rows. After knitting to the heel, decrease 12 loops of six loops in each row twice. As a result, 24 loops should remain on each knitting needle.

Position the pattern in the middle in relation to the heel and proceed to knit it. To do this, knit the fabric on two knitting needles, the length of the heel fabric will be equal to the number of loops multiplied by two. Decrease the heel on the same knitting needles on which the heel was knitted, at the beginning of the fourth knitting needle, knit the first 2 loops with the wrong ones, and then knit 2 loops together with the removal. At the end of the first knitting needle, knit the penultimate loops together with the front one, knit the last two loops with the wrong ones. To knee socks turned out to be soft and comfortable, all patterns should be knitted on the top of the product. Knit the lower part of the foot in stocking stitch (front stitch), but you can also knit it in the wrong side.

note

Cotton yarn can shrink when washed, so pre-wash some yarn to test for this.

A sweater, pullover, jumper is an indispensable element of clothing, without which it is difficult to imagine a winter, spring or autumn wardrobe, especially in our climate. Our portal is regularly updated, new models appear daily, but now 2016 is over and it's time to take stock. To be more precise, see which sweaters have become the most popular among our visitors. So, we have collected for you the Top 15 popular knitted sweaters and pullovers with knitting needles at the end of 2016 in terms of the number of views on the needlework portal site.

15th place with the number of views 1904 takes . The slightly elongated cut is in perfect harmony with the structural pattern. This model is perfect for tall girls. The sweater is made on knitting needles No. 6 from wool yarn mixed with alpaca.

14th place, decorated with braids in a slightly unusual way. Two large weaves run diagonally along the front and back, the edges of the sleeves are decorated with small plaits. The result is a feminine, sophisticated style that flatters the raglan sleeve.

2016 brought the oversized sweater trend into fashion, and just in time for 13th place we have a representative of this direction, who scored 1946 views. Gorgeous three-dimensional patterns of braids and knobs, collar collar create a feeling of not only warmth, but also comfort. The pullover itself is made of wool yarn on large knitting needles No. 6 and No. 7.

In addition to structural patterns, sweaters with jacquard patterns were popular last year. But the next popular model was able to incorporate a combination of both - and a structural pattern in the form of diamonds. The sweater is on 12th place and scored 1961 views, a significant figure, given the appearance of the model on the site at the end of October. It is quite laborious to tie such a little thing, but the effort spent is worth it. For work, you will need yarn (merino, camel wool and polyamide) 200 (225) g of bluish gray and 25 (50) g ​​of light gray and dark gray, as well as circular knitting needles No. 5.5.

One of the little-known varieties of jacquard pattern is the Faroese pattern. scored 2040 views and took an honorary 11th place in our top. The product is knitted on circular needles, so you will not find a single seam in it. The sleeves and the main part of the pullover are connected at the level of the yoke and slowly, by decreasing the loops, pass into the neck.

Decorated with a small structural pattern is located on 9th place our list of popular sweaters of 2016. He scored 2084 views. In order to make this model you will need 325 (350) 375 g of Novena brown yarn (50% merino wool, 30% alpaca lamb wool, 20% polyamide, 110 m / 25 g); straight and circular knitting needles No. 4.

8th place- . Number of views 2148. And again a model with a raglan sleeve. The popularity of this type of cut is due to the fact that such a sloping sleeve creates a more feminine look. This model is no exception, plus a pattern of openwork rhombuses and small braids that run along the raglan line adds sophistication.

7th place and again braids and plaits are presented to us. An excellent pullover for every day scored 2297 views. The pullover is decorated with 4 types of different braids, as well as a pearl pattern. In general, the model is not difficult to perform, but requires painstaking work. To knit such a sweater you will need: yarn (45% wool, 45% polyacrylic, 10% alpaca; 115 m / 50 g) - 450 (500) 550 g pink; knitting needles No. 4.5 and 5; circular knitting needles No. 4.5; hook number 4.5.

Easy occupies 6th place with the number of views 2609. The original model is made on needles 4.5 or 5 of natural merino wool. The pearl pattern of the front and back is simple in execution, and the sleeves are made with a simple elastic band.

Top 5 most popular sweaters by the number of views in 2016 starts with the model. Openwork patterns, 3/4 sleeves, rich color - all this in one model, which is easy to repeat using the diagram and detailed description. For work you will need COTON FIFTY yarn (50% cotton, 50% acrylic, 50 g/140 m) Ecarlate 231.651. Cp. No. 2,5 and 3.

We are getting closer to the top three favorite knitted sweaters of our portal for 2016 and in 4th place we have another soft beige color. The pullover is based on a fake patent elastic band, which does not weigh down the image in the slightest, but on the contrary makes it stylish and feminine.

Top three models sweaters and pullovers starts with cherry blossom. Feminine jumper for sophisticated fashionistas is made according to the pattern of knitting. It is fashionable to wear both separately under trousers or a skirt, and over a dress or blouse.

On the 2nd place, with 3293 views. Stylish model with a golf collar and a set-in sleeve. Embossed patterns and a voluminous braid adorn the product, a discreet beige color emphasizes taste and style. To repeat the sweater you will need 450 g of Meribel sand yarn (50% wool, 40% polyacrylic, 10% alpaca, 90 m / 50 g); straight and circular knitting needles number 7.

1 place in our Top 15 popular knitted sweaters and pullovers in 2016 ranked by a wide margin (number of views 3859). This model creates an airy image, which will suit both young beauties and slightly older fashionistas. To repeat the pullover you will need: yarn (54% alpaca, 24% polyamide, 22% merino wool; 199 m / 25 g) - 125 (125) 150 g pale pink; knitting needles No. 3.5; circular knitting needles No. 3, 60 cm long; 50 (55) 60 cm white lace.

Summing up the results of 2016, we noticed that the main trend among the models chosen by our subscribers are sweaters and pullovers with a pattern of braids, structural patterns in pastel, beige and gray colors.

A warm sweater knitted from high-quality yarn is able to warm and decorate us even on the most cloudy and dank day. Instead of freezing in autumn or winter in huge hoodies and countless acrylic vests, it is enough to get one solid wool product and forget about discomfort.

Why Yarn Quality Matters

Many novice knitters who choose material by eye rather than by the data on the label make the same common mistake: they buy acrylic. Visually, it can look like cotton, viscose, wool or even mohair. However, this does not change the fact that acrylic is a man-made fiber. It does not have the properties of the materials it imitates.

Acrylic yarn can be chosen for the manufacture of products that will not be used often (dolls, decor, disposable costumes). If you plan to create clothes, you should make sure that the thread does not roll, stretch, deform, and does not contribute to the greenhouse effect.

Creating women's sweaters with knitting needles, you can do anything with patterns. So, if the craftswoman does not need such a large number of arans, she may well leave only the central large braid, and knit the rest of the canvas with a double pattern.

We knit a fashionable sweater with knitting needles with our own hands, and let the winter be warm!

Prices in boutiques for a new collection "bite", but you go to knit a fashionable sweater yourself? You've come to the right place! For you, I have collected a lot of relevant and new patterns of knitting sweaters with knitting needles with diagrams and descriptions. Dream up with the color of the yarn, choose an interesting pattern, and your wardrobe will have a new and unique thing for all your friends to envy.

Stylish pullover knitting or crochet

If you work in an office or prefer a classic style of dress, then a strict, discreet pullover (a sweater without fasteners and a collar) must be in your wardrobe. Knitted pullovers will never go out of fashion, so feel free to knit several pullovers in different patterns and wear things with pleasure for more than one season. On the Hummingbird website you will find many interesting ideas on how to knit a pullover with knitting needles or crochet, with a description in Russian.

I wish you light eyelets, and pleasant creativity with!

A short (to the waist) openwork sweater can be used as casual wear, walking attire or an element of a working wardrobe. The gray color of this model allows you not to stand out from the crowd and is able to perform a wide range of stylistic tasks that a woman can set for him. Practicality and convenience during operation are the most important qualities of this openwork sweater. …

A very original pullover model, which is worth knitting by many modern fashionistas. The back is slightly longer than the front, and the raglan sleeve is a little short of the wrist. Material - yarn based on natural materials - wool and cotton. The proportions are equal. Therefore, the pullover turned out to be soft, warm, comfortable. Turning to the knitting pattern, it is worth noting that ...

Stylish women's pullover, decorated with original three-dimensional patterns. Although it turns out to be dense, the material is light and natural (the composition of the yarn is only 100% cotton). A simple checkerboard pattern is beautifully complemented by a scythe running through the center, beautifully passing into the neckline and details of the lower part. The cropped, stylish sleeve doesn't end with tapered cuffs, giving you...

A beautiful long pullover is the thing that will not only not be superfluous, but will also perfectly complement your stylish look. Decorated with an interlacing diamond pattern, this fishnet model is also convenient because it looks great on girls who wear sizes from 40 to 50 inclusive. Beautiful yarn made from natural cotton ...

Spectacular women's knitted pullover from beautiful acrylic yarn. The model was created for girls who like things with a concise and simple design. If you are a fan of stylish casual, love knitting and have time, you should familiarize yourself with the scheme. See for yourself that this creation of designer Nicole Magnusson can be repeated by you. Now …

A long comfortable sweater is an incredibly practical, warm thing. This model is also good because it will look equally beautiful in sizes S-M and L-XXL. As you can see, the pattern is extremely simple. There are no elements incomprehensible to the beginner. Comfortable boat collar, elastication at the bottom and on the cuffs, a small sleeve allowance. Looks good with clothes with…

If you like stylish warm things and you love to knit, this original women's pullover with knitting needles can become “the very” favorite clothes that you don’t want to part with. And you know what's the most amazing thing about it? If you bring it in, tear it, stain it with something indelible, you can knit it again exactly the same. One…

232059

Reading time ≈ 9 minutes

Knitting for women probably has no boundaries. Pullover, sweater, jumper, poncho, cardigan - this is far from a list of knitted tops that you can create with your own hands using knitting needles and thread. In the article, we will analyze modern women's sweaters, knitted with knitting needles in 2018 and photos with diagrams.

In anticipation of the cold season, large-knit models are in special demand, by the way, they are very popular today, sweaters with dense braid patterns, blouses made of delicate and warm mohair. Consider the same options from cotton. These sweaters are popular all year round. In the summer, they are indispensable on a cool evening, and in winter they can be worn in the office, indoors.


Yarn for women's sweater

Women's sweater or pullover can be made from any yarn. If you need a cozy, warm and winter model, then you should choose soft wool, this thread includes:

  • alpaca;
  • merino;
  • mink down;
  • angora;
  • mohair or kid mohair (the thinnest mohair on an acrylic or silk basis).

The thread may vary in thickness. For bulk knitting, you can choose a thick thread and knitting needles of the appropriate number. Then you need to knit a simple pattern without openwork. A warm sweater can also be knitted from a thin thread, the main thing is that it contains wool. For fine yarn, openwork is also good.

A pullover made of kid mohair with an openwork pattern looks very feminine. It is weightless, gentle and warm in any cold weather.

Sweater with beautiful raglan

This model is distinguished by elegance and simplicity. It is made from DROPS NEPAL yarn (65% wool and 35% alpaca, yardage 75 meters in 50 gram skein), but you can take any other yarn with the same yardage. For size M, you will need 600 gr. Knitting needles are recommended No. 5.5 circular.

Let's get to work:

The sweater is knitted in the round from the neckline. We collect 66 loops on the knitting needles, divide into loops of the back, front, sleeves and raglan. Knit 2 rows in garter stitch. Then for the back we knit 2 rows back and forth, not in a circle in order to form a neck, then we knit in a circle. Raglan is knitted according to the scheme below, the rest of the fabric is knitted with front stitch.

Having reached the end of the raglan (you need to check the given pattern), put the loops of the sleeves on additional knitting needles and knit the front and back parts round to the desired length, while making additions according to the pattern to expand the fabric. On the sides below the raglan, we continue knitting according to the raglan pattern. Having reached the place of the incision, on the sides we separate the front and back parts and finish separately in order to make the incision. The last 4 rows are knitted in garter stitch. We close the loops.

In the same way, we knit the sleeves, making reductions for narrowing, according to the pattern. We knit 7 centimeters at the end of each sleeve with an elastic band 2 * 2.


Sweater with jacquard yoke

A very feminine, beautiful and rather simple sweater, except for the jacquard yoke, which will have to work hard to get such a stylish new thing.

For work you will need:

  1. Threads DROPS AIR (70% alpaca, 23% polyamide, 7% wool, yardage 150 meters in 50 grams) in two shades. It is not necessary to use this particular yarn, you can pick up a thread with a similar footage.
  2. Circular needles number 5.

Let's get to work:

We collect 80 loops on the knitting needles and knit several rows with an elastic band 2 * 2 to form the neck, evenly adding loops in a circle to expand the fabric. On the back we knit 2 rows additionally, returning and not closing the circle.

Next, knit again in the round. According to the pattern, we begin to knit a jacquard coquette pattern according to the scheme. When the yoke is knitted, put the sleeve loops on additional knitting needles and continue on the circular needles front and back until we reach the desired length, evenly adding loops on the sides for a slight expansion, according to the pattern. We finish the work with several rows of 2 * 2 elastic bands.

Then we return to the sleeves and knit each of them on circular needles with the front stitch, finishing knitting with an elastic band 2 * 2.

Knitted sweaters

Large-knit products look very stylish and relevant on girls and women. Such sweaters are quite easy to make with your own hands. For such a model, you will need thick yarn and knitting needles. The work won't take long. For coarse knitting, usually the simplest cut with a minimum of details and the simplest pattern is chosen. Let's take a closer look at the 2018 models of knitted women's sweaters with large knitting needles with photos and diagrams.

Chunky knit sweater with cropped sleeves

A very interesting and fashionable option for a large knit sweater. It features stylish cropped sleeves and a braid pattern.

For him you will need:

  1. Threads DROPS Eskimo (100% wool, yardage 50 meters in 50 grams). It is not necessary to use this particular yarn, you can pick up a thread with a similar footage.
  2. Needles number 8.

This model is knitted in two parts: front and back, with a set of loops for the sleeve according to the pattern below. We execute the pattern according to the scheme. The collar is knitted after collecting the details.

For a knitted women's sweater according to the cut that is relevant in 2018 (photos with diagrams are given in the article), you can use any pattern, composition and color of yarn. The main thing here is not to choose openwork and not to knit crochets, as they will look like very large holes from thick yarn.

Sweater with pockets

An excellent model for outdoor recreation. This sweater features original large and stylish patch pockets. It is quite simple in execution, you do not need to knit the armhole and the head of the sleeve, the product lies softly along the contour of the body due to the pattern and soft yarn.

For him you will need:

  1. Needles number 5.

Let's get to work:

The sweater is knitted in separate parts and then assembled.

For the pattern, you can use a pearl pattern: alternately knit the front and back loops in the front row, the wrong side - according to the pattern. Next front row: change the order and knit over the front - purl and over the purl - front.

First we knit the back according to the pattern below. Here we immediately start knitting with a pattern, without an elastic band. Then we knit the front part in the same way, but with a deeper neck.

We start the sleeves with 2*2 ribbing and then move on to the pattern. We check the sleeve with the pattern.

Then you need to tie 2 patch pockets, starting with a pearl pattern and ending with several rows of 2 * 2 elastic.

Long back sweater

One of the highlights of modern sweaters is an elongated back. Consider this version of a women's sweater. By the way, this feature can be used for any other pullover model, simply by tying the back part longer than the front.

For the model in the photo below you will need:

  1. Threads DROPS AIR (70% alpaca, 23% polyamide, 7% wool, yardage 150 meters in 50 grams). It is not necessary to use this particular yarn, you can pick up a thread with a similar footage.
  2. Needles number 5.

We start knitting from the back, then the front and sleeves. We carry out all the details according to the pattern with the front stitch, on the sides of the front and back and for the sleeves we use the pattern shown in the diagram.

We sew the finished parts, leaving cuts on the sides. We tie the neck with an elastic band 2 * 2.

Jumper with flared openwork edges

This model has two amazing, bright features at once: the color of the thread and the openwork flared edges. It is made from sectional dyed cotton. Such a thread creates the effect of a smooth transition of shades in the product. Openwork edges make the jumper unusual and stylish.

For the model in the photo below you will need:

  1. Threads from 100% cotton of sectional coloring with a footage of 120 m on 50 gr. Yarn from Alize Bella Batik is a little thinner, but it can be used.
  2. Needles number 3 and 4 and circular needles.

We knit a jumper in detail, according to the given pattern. All parts are made separately, and then assembled with a knitted seam.

We knit the sleeves and openwork edges of the jumper according to the scheme below.

This interesting piece of clothing will add color to everyday life and will look stylish and profitable on any figure.

It turns out that if a sweater or jumper is knitted with a simple front surface, and the sleeves are openwork, then such a little thing will slim its owner. This technique can be remembered by fashionistas and lovers of knitting.

By choosing any model of a women's knitted sweater, the description and photo with diagrams of which are given in this article, you can be sure that in this new thing you will look stylish and fresh, according to fashion trends in 2018. In order for the knitting process to be a pleasure, and the result to please, you should consider some tips from experienced knitters:

  1. Before starting work on a sweater, you should knit a small square with the main pattern chosen for the product, with the same knitting needles and from the selected threads, in order to calculate the number of loops. This test sample must first be moistened and then dried, and after that the loops should be counted.
  2. To knit complex patterns, you can make a paper pattern with the necessary measurements or draw a pattern from a product that fits well on the figure. In the process of knitting, constantly check with this pattern.
  3. It is better to assemble parts with a special knitted seam using a needle and thread from which the product was knitted.

Current trends in knitted fashion for women

This article presents new items, current models of 2018 women's knitted sweaters with photos and diagrams. And now let's talk about what general trends are relevant today in knitted fashion for women and what you should pay attention to when choosing a model for execution.

So, what exactly will distinguish a knitted fashionable and stylish sweater from a dusty one in a grandmother's chest:

  1. Today, the trend is simplicity of cut and pattern.
  2. Thread. It should rather be natural, soft without shine, matte.
  3. Yarn color is an important detail. Today, everything is natural in fashion, so you should choose the color of the thread from those that are closer to those shades that are found in nature.
  4. Models with interestingly designed raglan, coarse knit models and the so-called “pillowcases” that are knitted from two squares (front and back) and two smaller squares (sleeves) are popular today.
  5. Braids are still in fashion, but you need to successfully combine them in a pattern.
  6. A fluffy thread (mohair and angora) is quite right to decorate the wardrobe of a modern lady.
  7. And finally, today a sweater, even a coarse and large knit, can also be used for an evening dress, competently completing it with a skirt, trousers, and accessories. So boldly arm yourself with knitting needles and create!