Do-it-yourself volumetric Christmas tree. DIY Christmas trees

09.09.2019

Creative Christmas trees are good because they are unusual, they can be created from a variety of materials, and edible trees will become a decoration and the main highlight of the New Year's table.

How to make a Christmas tree from plastic bottles?

To make such a fluffy beauty, take:

green plastic bottles;
scissors;
Scotch;
a wooden stick, the diameter of which is slightly smaller than the hole in the neck of the bottle.

Prepare containers by removing labels and rinsing. Each bottle needs to cut off the neck and bottom, cut the rest into several rectangles, chop those into strips, but not completely.

Trim the shoulders of the bottle, leaving only the neck. You put a wooden stick in it. Starting from the bottom, attach the blanks from the bottle here so that the fringe looks up.

We decorate the entire trunk, and attach a small piece on top, which will become the top.

The workpieces must be fastened in such a way that the largest are at the bottom, and the smallest at the top.

Here's what else a tree made of plastic bottles can be. Doing this with your own hands is also quite simple.

To reproduce such a masterpiece, take:

green plastic bottles;
scissors;
a wooden stick of a suitable size.

Remove the labels from the bottles and proceed with the blanks as follows: cut off the bottom, cut the rest into 10 identical strips, almost reaching the shoulders of the bottle.

Now you need to make diagonal cuts on the 1st and 2nd sides of each tape. Fold the resulting fragments in one.

Take the bottom of a large bottle, make a hole in it, put the neck of the bottle into it, into which a wooden stick is inserted. Fix this part of the structure with a plug by screwing it onto the neck.

Slide pre-made parts on the stick, starting with the largest bottle and ending with the smallest.

If you strung all the details on the barrel with the neck down, then set the last one with the neck up. Secure the tree by placing a cover on the top of its head.

It turned out to be a wonderful tall tree made of plastic bottles. An even larger tree can be made from this container by putting bottles on, for example, on a mop.

If you want to make a cone-shaped tree, then fold a sheet of paper or cardboard in this way. Cut the neck off the bottle and insert a piece of paper here. Cut trapezoidal fragments from other parts of the container. Shred the longest edges of each piece into equal strips, no more than 2 cm at the top.

Secure these elements with tape, placing them in ascending order, starting with large and ending with small.

Here's what you should end up with.

If you, for example, work in a grocery store, then you can put here a large Christmas tree made of plastic bottles, which will certainly attract customers. To do this, you need to arrange the bottles in a circle in rows, and place plywood circles on them. Each subsequent tier is smaller than the diameter of the previous one. Closer to the top, there should be 3 bottles, place a star on top.

Even empty plastic bottles will make a great decor item. You can carry out lighting so that at dusk the trees sparkle attractively.

Other junk materials will also become a picturesque herringbone.

We make a Christmas tree out of paper with our own hands - a master class

After the magazines are read, they are usually thrown away. But you can do it differently, make a paper tree. To create it, you can use newspapers, old books.

Here is a list of the essentials:

a sheet of cardboard or whatman paper;
colorful magazine;
shaped hole punch;
glue gun or PVA;
pencil.

First you need to roll up the cardboard in the form of a cone, glue it in order to fix it in this position. Prepare decor items. To do this, cut them out of a magazine or book using zigzag scissors or a hole punch.

These details need to be rounded. To do this, wind each one around a pencil. Now you can glue them to the base, starting from the bottom.

Place the pieces as close to each other as possible so that no cardboard can be seen between them. Glue in rows, placing the elements on top of each other. Wrap one of them around the top of the head. The paper tree is ready.

If you like strict lines, then check out the next option.

Such a tree will be appropriate in the office. On the one hand, it has a strict form, and on the other, it looks festive. Here's what is needed for such needlework:

whatman;
double tape;
wrapping;
ordinary scotch tape;
decorations;
scissors.

Instead of whatman paper, you can use thin cardboard. If there is not a large enough piece, then you can create one from small ones using scotch tape.

Fold this base into a small bag, secure with tape.

The excess needs to be cut off.

Wrap the cone with wrapping paper. To do this, put it on a work surface, place a cardboard blank on top, fasten it with tape in the region of the crown.

Wrap the cone completely, then fix the edges of the paper with double tape, and cut off the excess.

The lower part of the tree must also be made even, removing the paper with scissors here too. Decorate the tree with a star, ribbons, you can decorate it with sweets or beads.

Here's what else a paper tree can be.

Take:

skewer;
design paper or colored cardboard;
thick cardboard;
glue or glue gun.

Draw a square on thick cardboard, cut it out and glue it to the skewer. Cut the circles at the same size first. Make holes in them, call them on a skewer pre-greased with glue. Then make a few smaller circles. The tree trunk itself is also decorated. Gradually cut out more and more small circles, put them on the trunk.

Here's what other paper tree using foam can make.

For creativity you will need:

foam or cardboard;
green corrugated paper;
scissors;
adhesive tape;
masking tape;
marker;
PVA glue;
hook;
stationery knife.

Draw a sharp corner on the foam or cardboard. If this is difficult to do, then follow the photo tips. First draw a vertical line, then two horizontal ones, after that you will have an even angle. If you want to make a large Christmas tree, then just glue a few fragments with tape.

Cut a strip of corrugated paper, chop it with scissors in the form of a fringe, slightly short of the opposite edge. Begin gluing these decorated tapes from the bottom.

When the whole creative tree is decorated in this way, decorate it as you wish. Glue a cardboard rectangle from below, having previously painted it brown. But you can do without this part of the trunk. Use a crochet hook or double tape to attach the tree to the wall.

Here is what a wonderful Christmas tree came out of paper. Textile models turn out to be very interesting, for them you can use the rest of the material.

Christmas tree made of fabric and threads

To make such a stylish beauty, take:

felt;
cardboard;
scissors;
double tape or glue.

It is better to take material in two shades, then the creative tree will look more contrasting.

Roll a cone out of the cardboard. You can wrap the bottom with a little tinsel. Cut into circles of felt, in the middle, using scissors, make intersecting segments. They are needed in order to put felt blanks on the base, which you will do. These cruciform notches will also help the circles become wavy.

First put on the larger blanks, then the medium ones, the smallest ones will be at the top. When you fill the entire cone, it remains to decorate your creation, to admire what a beautiful Christmas tree made of fabric you get.

You can also make a very pretty tree from threads.

To craft this, take:

a cone made of foam or cardboard;
fleecy yarn;
pins;
decorations;
thick yarn.

If you don't have a Styrofoam cone, then roll it up with cardboard. To make the work move faster, do the turns with two threads at once. Attach them to the base with pins.

When you have completed the entire cone, do not cut these two threads, but now wrap them around the base, moving downward.

Cut off the thread, secure the remaining end with a pin. Decorate the tree with beads or buttons, and attach them with pins or sewing.

The next do-it-yourself creative Christmas tree is created from wire and thread. Use a pair of pliers or round nose pliers to help yourself and bend the piece of wire to make it look like a star. Attach a thinner wire to it, which must first be rolled into a cone. Wrap it with threads. You can simply make such a star out of wire and attach it to the crown of the newly created blue tree.

The New Year's table will look amazing if you decorate it with edible Christmas trees. See how wonderful such a strawberry tree looks like.

You can make a chocolate base and attach the berries to it with the tip outward using a toothpick.

Here are some other original trees you can create from products.

Check out the relevant workshops.

Edible Christmas Tree: Step by Step Cooking

To do this, take:

wooden skewer;
Apple;
cucumbers;
red and yellow sweet peppers;
plate.

You can use wooden skewers or one half of a Chinese chopstick.

Place half of the apple on a platter or plate, cut side down. Stick a skewer into it. Chop the cucumber into not too thin slices.

Place these slices on a skewer, starting with the largest one. Arrange them in a checkerboard pattern or something so that they look like the branches of a Christmas tree.

Cut small pieces from red and yellow peppers. Place them on top of some cucumbers or secure with toothpicks. String an elongated piece of pepper on top of the head, closing the skewer on top.

You can decorate a New Year's dish with this tree, for example, a salad. Place a little parsley around the edge of the plate, which will symbolize the green herb.

The next tree consists of fruits, berries and vegetables. Take:

large carrots;
Apple;
kiwi;
strawberries;
toothpicks;
grape;
greenery;
a recess for removing the core from apples.

Wash the apple. With a special tool, take out its middle on one side. On the other hand, make an even cut so that the apple is firmly on the platter.

Set the carrot into the groove. Stick toothpicks into it. String kiwi halves, strawberries and grapes on top of them. The star can be cut from a suitable fruit or vegetable, or from a thick piece of cheese. Decorate the plate with herbs to make the tree look even more picturesque.

The next tree is made from apples. So that they do not darken, the cut slices must be dipped in a solution of lemon juice for 15 minutes.

First you need to cut the middle out of the apples, then chop these fruits into circles. Use a knife or a special notch to shape these blanks into a star shape. Put it on a plate, place a slightly smaller piece on top. Adhering to this tactic, lay the tree to the end. Decorate it with cranberries, berry physalis.

If you are making a New Year's salad, lay it out in a cone-shaped slide, compact. Slice the leek leaves to make them look like sharp corners. Stick the decorations into the salad so that the leaves turn into twigs. Decorate the tree with finely chopped carrots.

If you don't have leeks, then you can garnish the salad with dill. Look at the pictures for how to arrange the branches, starting from the bottom.

The creative tree is made from many other products as well.

Cut the cheese into sharp triangles, string them onto a pre-fixed skewer, garnish with a slice of red pepper. Decorate the plate with tomato and kiwi slices.

If you have green peppers, turn them into lush spruce branches, make a Christmas tree from this edible material. Lemon or grapefruit circles and slices will also become a picturesque decoration of the New Year's table.

If you use kiwi for this, use unripe fruit so that the circles stick tightly to the base.

Meat lovers will not be left out either. After all, an edible tree can be created from salami slices.

Put them on a skewer fixed on the half of the apple, drape the top. Decorate the plate with herbs, and the masterpiece can be put on the New Year's table.

Vegetarians and connoisseurs of proper nutrition will be able to make a Christmas tree from broccoli, decorate it with cherry tomatoes, and make a star from sweet pepper. The asparagus stalks will turn into a tree trunk and the cauliflower into white drifts.

The basis of the next tree is a salad, but it is better to take one whose ingredients can be well bonded to each other. A dish that contains boiled rice is excellent. We decorate the base with green lettuce leaves, then decorate this edible tree with peeled shrimps and cherry tomatoes.

If you like Asian food, make rolls with the addition of herbs to give the base that shade. If they are with caviar, then this ingredient will simultaneously act as a decoration. Fold the rolls as shown in the photo to make a comfortable Christmas tree.

Sweet lovers can decorate the base of foam or foam rubber with sweets, attaching them with toothpicks. And if your family loves to eat properly, then fix small sausages, sausage slices, tomatoes and lettuce on the basis. You can attach other edible ingredients here, thereby delighting those who like hearty food.

Gourmets will surely love the horizontal tree made from tomatoes and different types of cheese - a great opportunity and excuse to taste them.

If you like a Christmas tree made of candies, tape them to a plastic bottle. And if you do not know what to give an adult for the New Year, then use a bottle of champagne as a base, decorating it in this way. Give this present.

If you like to bake, make a gingerbread or shortbread dough, roll it out, cut out the stars using special notches or just with a knife. It remains to decorate the baked sweets with white glaze and arrange them on top of each other.

Even pizza will create the right mood on the New Year's table. To do this, when rolling out the dough, cut a Christmas tree out of it, garnish with cherry tomatoes, olives and slices of smoked sausage or chicken pieces. Sprinkle a little cheese on your masterpiece and bake in the oven.

Hello dear readers! I was here decorating an apartment before the New Year and I realized: a tree with my own hands could help in decorating the room. And not just one. And not one :)

Of course, I had several ideas that I want to bring to life in the near future. But when I tried to find master classes on the Internet on creating these wonderful creations. Oh, with the help of what they just do not make :) I would not have thought of using some materials at all. So together with you today I will admire the masterpieces of human fantasy in the field of Christmas tree handmade!

To make it easier to search, I offer a small content:

DIY Christmas trees (and not only): master classes

Almost all the Christmas trees presented today are made using different materials. Some are very unusual, artsy, rich. I would even say elite. Others, on the contrary, are as simple and minimalistic as possible in their design. A la Ikea, so to speak.

DIY paper tree

The largest group today. You will see many representatives of the beautiful spruce species. Each one is not like the others, so take your pick :)

Origami

The simplest version of a paper Christmas tree is using a square. Fold the square in half (diagonally), bend the opposite sides to the center (like in an airplane) and that's it :)

Tip: Use this simple trick to decorate a greeting card or fold your napkins beautifully.

Angular

First things first, fold the square of paper as shown in the photo. Then:

Fold the structure so that the side corners are inside. In this case, you get a square, four times smaller than the original.
Fold the right corner to the center,
And the left one.
Fold the right corner to the right.
Fold this corner under you.
Do the same with the second.

Now turn the structure over and repeat steps 2-6 only for this side. All that remains is to cut off the sharp bottom tip and make a few cuts on both sides. Then peel back each notched end and place the tree on the table)

Circles

To create this spruce, take paper and draw a circle on it, tracing it as required, as under number 1. Next, cut out a circle and cut each section to a small circle. Now wrap each of these small sections on both sides with the tips inward, glue. Work the whole circle this way.

For the spruce, you need several rows. In the photo, for example, you see a beauty of 15 layers with a cone top. The layers, by the way, are collected on a wire, piercing the centers of the parts.

Panel for kindergarten

In kindergarten, they gave the task to make a fir tree together with the child? Then this option is the easiest one. Take thick cardboard and colored paper. Cut the triangles out of the cardboard, and cut the paper into strips and overlap. Even a child can handle this :) Cut off the excess. At the bottom, you can glue a skewer and stick it into a synthetic winterizer.

Tip: the resulting product can be used as a bookmark for books.

Craftsmanship using available materials

To create this semblance of fluffy coniferous creature, you will need a long metal post on a stand and a lot of waste paper. Feel free to use newspapers, old magazines, etc.

Tip: An additional decoration for the Christmas tree can be done with paint in a spray can, which can be sprayed on the leaves. This will make them stronger and more durable.

Big tree of knowledge

The next beauty will be a spruce that carries knowledge. For her, you just need to fold all available books in a pyramid. I strongly discourage hanging an electric garland, as in the photo: fires occur very often in the New Year, do not neglect it. Better to put the usual tinsel and balls on the ledges.

From tubules

Incredibly simple technology. Suitable for decorating postcards and walls. Prepare a few rolls of paper rectangles. Glue each one in the intended place. The tubes can be made gradually decreasing or with a "brush" (sometimes longer elements can be applied higher than necessary).

Glue button or sequin decorations on top.

Fluffy

For it, you will need many, many paper strips, which will need to be glued in layers to a paper cone. Put on a cute cone hat on top. An excellent craft that you can do with children :)

For those keen on quilling

Do you like twirling paper spirals? Then prepare several strips of paper of the same thickness. Roll 17 pieces into spirals and knot one end at each. For the trunk, just roll 4 tubes, put on a skewer. Glue all parts according to the photo. The ends of the "branches" can be decorated with cylinders of a different color, similar to Christmas tree decorations.

Vytynanka

I remember that my sister once mentioned that she liked the so-called vytynanki - one of the types of Slavic folk art in which things of amazing beauty are cut out of paper. They are often glued to glass to enhance the festive atmosphere.

And they are done like this: the desired pattern is drawn in advance on paper. In this case, a spruce folded in half. And then, with the help of a well-sharpened office knife, all unnecessary parts are cut out. For a spruce, you will need two parts folded in half, which can later be sewn in the center on a sewing machine or by hand.

Corrugated paper

Continuing the paper theme, I want to show you three simple Christmas trees. First, with blue roses, which are made of tissue paper (like corrugated paper, but much thinner). Each rose is created using a strip, twisted strongly at the center and slightly looser at the end. Thanks to the properties of paper, roses are easy to straighten and become lush.

The base is again a cone.

The next spruce is very similar to the previous one, but here the strips, using which flowers are created, are cut along the edge, due to which they are very fluffy. They are again twisted into a flower, but they do not seek to give the appearance of a rose, but simply grind as much as possible.

From muffin cups

Well, the idea is interesting. I have just a bunch of such molds, which, it seems, will never be useful to me (I would rather buy silicone ones). Cut off the bottom of each and cut from one edge. And stick on the paper cone.

By the way, you can make a flat Christmas tree from the scraps for a postcard, as in the photo in the master class.

Christmas trees made of fabric

Flower

For this beauty, you will need many flowers from the circles. For these, cut out a few circles from the fabric and burn the edges. Better to take organza, veil or something similar. Then collect each flower with a string and decorate the core.

Spruce again from a paper cone at the base :)

From felt

To create these fir pendants, use soft (for the base) and dense (for other elements) felt and beads. Patterns can be made directly from the photo. All that remains is to cut out the details from the felt, which then need to be sewn with a basting seam and stuffed. Well and decorate, of course :)

You can give such a Christmas tree to a guy - it will be very touching :)

Satin ribbon

Prepare beads, satin or rep ribbon (or maybe lace at all?), Threads and a needle. All that is needed is to string beads and ribbon loops alternately on the thread. The main thing is not to forget to fix it at the beginning and at the end of the product.

From balls

The essence of creating this wonderful Christmas tree is to create a huge number of balls from fabric. For each of them, cut out circles and tighten with a thread, laying a basting seam. Put some padding polyester inside and tighten. Each such ball must be glued to the base.

The base can be a foam cone, a paper cone, or sewn from fabric. You can also arrange a spruce in the form of a topiary, for this you will also need a pot with polymer clay and sprinkles to create the effect of an earthen embankment.

Other materials or need for invention is cunning

Sorry, dear readers, I do not want to offend anyone in any way. It's just that this expression best describes the impossibly diverse amount of materials with which people manage to create Christmas trees :))

From beads

Quite not a simple, but interesting Christmas tree. Prepare chopped beads, a pair of beads and a thin wire for working with beads to create it. First, string the top, as in photo 1. Then make four upper legs - this will be the top.

Now prepare the branches, in each of which make several loops - smaller for the upper branches, more for the lower ones. Collect all of them into one trunk, wrapping it across with a thin wire.

From plastic bottles

I respect this master class for its respect for nature and waste recycling. Take a plastic bottle, cut off the smooth center of it, which you cut into a fringe. The lid will go to the top, the bottom can be used as a delivery. Glue all the cut elements to the central rod.

From spools of thread

My friends, if you have a certain number of wooden spools of thread, then you should know that you are the owner of a treasure with which you can make an amazing spruce. To do this, clean all the spools from the threads and glue the lowest row on a round dense base. Then glue row by row on the ones already below. Simple and stylish :)

From sweets

The base will again be a paper cone. Attach a row of ordinary tinsel to it, then a row of candies, then tinsel again, etc. The most delicious candy can be glued to the top (as a star). One minus - nothing will be left of the tree quickly :)

From the bark

Strict Nordic trees. Which you can do if you have a paper cone and a little (okay, a little more than a little) bark on hand. Pieces need to be glued in rows so that the tree looks like a spruce.

Only please - do not spoil the living trees for this. Better to look for something already dumped by a thunderstorm. By the way, the small-chunk method works with CDs too;)

From sticks

We continue the theme of nature. This time we are decorating the holiday boxes. Use chopsticks to lay out a semblance of a tree, which, in turn, decorate with threads, buttons and other decorative details.

From clothespins

This one should definitely be cooked up for the New Year))) I have a dozen or two clothespins with hearts, it will be cool) In general, all that is needed is to build a rod with a stand. For example, a lid with a spoke. And on the knitting needle already put on "branches" In the edges you can insert chupa-chups.

Bohemian

And we will make this spruce with feathers. The principle is the simplest - glue the feathers in rows from the bottom. By the way, feathers can be purchased in woven fabrics. But what they used to paint it green - I don't know: (Maybe someone will tell me?

Wire

Build the frame like this: wrap three circles of wire around something round (cans, buckets, etc.), so that each next circle is smaller (or larger) than the previous one. Then take three pieces and use a thin wire to tie them together at the top and in one place on each circle.

All this can be wrapped in a beautiful garland. If you trick, you can even hang a few Christmas tree decorations.

Mesh (and sisal)

Such a tree can be built in a few minutes. To do this, take a mesh or sisal sheet (read what it is). Place on paper cone and wrap in several layers. Secure the top with a cord, wrapping it in a spiral around the spruce. Decorate with Christmas tree decorations.

And now is the time for the most minimalistic Christmas trees, which will decorate the house and will not take up much space.

From ... Christmas balls

Here's a pun - a tree made of Christmas balls. Nevertheless, it looks great :) For some reason, I immediately imagined such a structure at some cool corporate party of a large company - it looks very status-like.

To do this is not at all difficult: take a few dozen green (or whatever you want) balls and tie a thin thread or fishing line to each. The most difficult thing is to measure the length correctly. Do this: Determine for yourself the required number of balls for each row and, starting from this, estimate the length of the thread. The higher the ball, the shorter the thread.

Symbol

This is what the following two conifers can be called. The first is located on the wall and is composed of pieces of tinsel imitating spruce branches. You can attach it to double-sided tape so that the ends do not stick out.

The second is simply skillfully assembled with the help of many paintings, badges, souvenirs, etc., which were collected in the likeness of spruce. Notice how some of the elements seem to imitate toys that are located on a tree. An interesting idea, by the way, for an original gift for February 14 - winter will still be in force, so the tree will be quite appropriate.

Well, dear readers, it's time for me to say goodbye to you. The spruce hit parade is over, share your impressions: what inspired, what will you take note of, etc. Be sure to tell your friends in social. networks using the buttons below. Till!

Best regards, Anastasia Skoreeva

Useful Tips

To become the owner of a Christmas treeit is not necessary to buy it- you just have to look at useful tips and find out how you can doa beautiful Christmas tree with your own hands.

Today you can findmany treesin shops and on the street.

You can put in the house a natural tree or twigs from a tree for a scent, but to decorate a house, or a gift to a loved one, you can do it, knowing a few interesting tricks.

On our website you will also find:

20 DIY little Christmas trees that will decorate any home
How to make a Christmas tree from cones
How to make a Christmas tree

Find out how you can make a Christmas tree frompaper, food, fabric and even pasta.

Make such a craft not difficult at all, and your house will be decorated with a unique decor, and friends and acquaintances will be happy to receive a Christmas tree made by you as a presentation.

DIY paper tree. Christmas tree made of scraps of magazine pages.

You will need:

An unnecessary magazine or book with colorful pictures

Cardboard or thick sheet of paper

Glue gun or PVA glue

Shaped hole punch, optional

Pencil or pen

1. Make a cone out of a thick sheet of paper and secure it with glue.

2. Prepare magazine pages with bright pictures and cut out many circles of the same diameter from them. If there is a shaped hole punch (flower or large circle shape) it will be easier.

3. Use the cut out circles to wrap the pencil so that they curl a little.

4. Starting at the bottom of the cone, start glueing in the folded circles.

Make neat rows. The circles should be tightly glued to each other so that the cardboard is not visible.

5. Make a small cone out of one circle, and glue it to the top of the cardboard cone.

The tree is ready!

DIY Christmas tree made of cones and dried citrus fruits

DIY Christmas tree (master class). Christmas trees made of wrapping paper.

You will need:

Large thick sheet of paper

Wrapping

Double tape

Scissors

Decorations

1. Make a cone out of a sheet of thick paper.

* If your wrapping paper is rather thick, you can bypass step 1 and make a cone out of wrapping paper.

1.1 Roll the paper diagonally, holding one end to keep it sharp.

1.2 Secure the folded paper with tape. You do not need to do everything too carefully, since you will cover the cone with wrapping paper.

1.3 Trim off any excess at the bottom of the cone to make a flat base.

2. Prepare colorful wrapping paper and cover the cone with it. To do this, lay the paper on a flat surface, pattern side down.

2.1 Using tape, attach the end of the colored paper to the top of the cone.

2.2 Begin to twist the cone slowly, wrapping it in wrapping paper. You need to wrap the cone tightly.

2.3 Measure the paper and cut before completely wrapping the cone. Glue double tape to the edges and connect to the other end. In the bases, you need to cut off the excess so that the paper is even.

3. It remains only to decorate the tree at will. You can make paper stars, use sequins, stickers, glue on beads and / or buttons, wrap with tape, etc.

Similar trees:

DIY fabric Christmas tree. How to make a felt Christmas tree.

You will need:

Glue or double tape

Scissors

* Try using two colors of felt to make the tree look even more beautiful. In this example, yellow and orange felt were used.

1. Make a cone out of cardboard. Secure the ends with glue or double tape.

2. Prepare felt and cut out circles of different diameters, from small to large (see picture). You can use the pre-made circle templates made from cardboard.

3. Glue the Christmas tree tinsel to the bottom of the cone.

4. Now you need to make a criss-cross cut in the center of each felt circle. Do not cut too much so that the felt garment does not fall off. Make the cut just enough to fit the circle tightly onto the cone.

5. Start gradually putting the circles on the cone. If you are using two colors, then wear circles in sequence, first one color, then another. Also worth noting. What to put on the next circle is necessary not only on the cone, but also over the tips of the notches of the previous circle.

6. We decorate the top of the tree. To do this, just add some tinsel, to which you will need to add a pre-prepared small cone of felt. Fix the tinsel and crown with glue.

* If you wish, you can hide a sweet gift inside the cone.

DIY original Christmas trees. Glowing Christmas tree.

You will need:

Floral floristic mesh (preferably several shades of green)

Scissors

Cardboard for the cone

PVA glue

Cellophane

Safety pins

Garland

Floral wire

Decorations optional

1. Make a cone out of cardboard.

2. Wrap the cone in cellophane.

3. Take any container and make a solution in it of PVA glue and a small amount of water

3. Prepare your floral mesh. Cut it into small pieces and dip each into a container with a solution.

4. Begin gluing the pieces onto the cellophane-covered cone. Glue the mesh sections of different shades in different directions. The joints should be anointed with another layer of glue for a stronger attachment.

5. Secure the entire structure with pins and wait for the glue to dry.

6. You now have the first layer of the herringbone. Now, in the same style, you need to make a second layer. After finishing gluing the second layer, leave the structure to dry.

7. Now remove the tree from the cone - the glue should quickly come off the cellophane.

8. Place a garland inside the tree, which you want to secure with floral wire.

9. It remains to decorate the tree to your liking.

DIY Christmas trees (photo). DIY pasta tree.

You will need:

A cone made of plastic or foam (or you can make it yourself from cardboard)

PVA glue

Pasta of various shapes and sizes

Spray paint, acrylic paint or gouache

Brush.

1. Prepare a cone and paint it the desired color. Wait for the paint to dry.

* If you are using spray paint, you can skip this step.

2. Make your pasta. Start applying glue to each piece and glue the pieces to the cone. Design a Christmas tree as your imagination tells you.

After applying the glue, press down on the piece and hold it so that it adheres well to the cone. It's okay if glue is visible from under the pasta.

Continue until you have covered the weight of the cone with pasta. Wait for the glue to dry.

3. Start dyeing your pasta. In this example, acrylic paint was used. Try to paint all the details carefully so that there are no empty spots.

* It is advisable to paint in two layers.

* If painted with white paint, the herringbone will look like a porcelain product.

Useful advice: if you want to remove the craft, then put it first in a plastic bag, so you can immediately find the part that could come off the cone.

We make a Christmas tree with our own hands. Bright paper herringbone.

You will need:

Colored cardboard or design paper

Thick cardboard

Glue moment or glue gun (with hot glue)

1. Cut a square base for the tree out of thick cardboard.

2. Insert the skewer into the cardboard and secure with glue.

3. Now you need to cut circles of different diameters from design paper or colored cardboard. You need to make 3 circles of the same size.

For example, you want to make 10 different sizes of circles, then you need to cut 30 circles (3 for each size).

* If you don't feel like cutting out a lot of circles, just shorten the skewer and you will end up with a cute mini tree.

4. Make a small hole in the center of each circle.

5. Before you start putting the circles on the skewer, grease the hole in the middle with glue.

6. Start slipping the circles onto the skewer, leaving some space between them.

7. Cut stars out of paper and attach them with glue to the top of the tree. You can use another piece for the crown and not necessarily paper.

Crafts. Do-it-yourself Christmas trees from a thread.

You will need:

Thick yarn

Pile yarn

Cone (cardboard or foam)

Safety pins

Decorations to taste.

1. Make a paper cone or buy a foam cone from a specialist retailer.

2. Take both strands and secure the ends with pins at the base of the cone.

3. Start wrapping the threads around the base of the cone, securing with pins about every 5 cm.

4. Now start moving towards the top of the cone, carefully wrapping the future tree with both threads. At this point, you do not need to attach the thread to the cone.

5. When you get to the top of the head, re-pin the threads by wrapping the threads around the top of the head several times.

6. Both yarns now need to be pulled down, also wrapping the cone in a second layer.

7. At the base of the cone, cut off the threads and secure them.

You can leave the tree like this, or you can also decorate it.

In this example, artificial berries were used for decoration, but you can use multi-colored beads, buttons, buttons, etc.

Try also making a decoration for the top of the tree. The crown can be decorated as you like best.

You can leave the tree like this, or you can also decorate it.

You can just make a paper hat or a star, or you can make something more complicated. If you chose the latter option, then there are instructions for you.

You will need:

Flower wire

Wire cutters

Sequins

PVA glue

Thin wire (calibrated wire)

1. Bend the wire into a star shape (see pictures) and cut off any excess.

2. Cover the star with glue and sprinkle glitter on it.

3. Attach a thin wire to the star, as shown in the picture:

4. Attach a star to your tree.

DIY creative Christmas tree

If you want something original, or you just don't have enough space for a large Christmas tree at home, you can try to make such a simple structure.

It should be noted that such a tree is suitable for any room. It can be done both at home with children and at work.

This tree can rise by 1.5-2 meters and almost does not take up space in the house. Moreover, it is a good background for New Year's photos.

You will need:

Foam base or matte cardboard

Scissors

Corrugated paper

Masking tape

Duct tape

PVA glue

Stationery knife

Marker, optional

1. Spread the foam or cardboard on a flat surface to create a large rectangle (see picture).

2. Use duct tape to secure all the pieces together.

* In this example, black tape was used for better visibility, but white tape is preferred.

3. Mark the size of your future tree with masking tape.

4. Using a clerical knife, carefully cut out the shape of the future tree.

5. Prepare crepe paper, fold it in half and cut into the fringe. You should have a lot of fringed paper to cover the entire tree.

6. Begin to gently glue the crepe paper to the foam, starting at the base of the tree. The fringe should hang slightly below the base to cover the foam (or cardboard) and also slightly cover the top of the tree trunk, which we'll do later.

7. Move to the top of the head, covering the entire tree with a bright green corrugated paper coat.

8. Add a hook to the back of the tree so the tree can be hung. Instead of a hook, you can use double tape to glue the perimeter of the tree.

Is an artificial tree blasphemy? Not at all. On the contrary, from the point of view of preserving the surrounding nature, buying an artificial Christmas tree for the new year is a noble deed. And by the way, it is not necessary to buy a Christmas tree, you can make an unusual Christmas tree with your own hands.

How to make an unusual Christmas tree with your own hands

In almost all versions of how you can make an unusual Christmas tree, a cardboard base is used, as in previous master classes, all the unusualness of today's Christmas trees lies in decorative materials.

To begin with, a selection of four unusual Christmas trees.

See below how to make these beautiful Christmas trees.

The first tree is made of spoons.

To make this tree you will need: packaging of plastic spoons, glue and paint. The workflow is quite simple: we cut off the handles from the spoons, put them on newspaper or unnecessary paper and spray paint (the cardboard base, by the way, can also be sprayed with paint). As soon as the paint dries, we begin to glue the spoons, as shown in photo 6,7,8.

The next Christmas tree is made of Christmas tree decorations.

In order to make a Christmas tree from toys, you will need: the actual packaging of Christmas decorations, glue, base and Christmas tree tinsel. We remove the rivets from the toys, glue the Christmas balls to the base, then glue the tinsel in the space between the balls to hide the gaps. We admire the result!

And the remaining two Christmas trees: one is made of tinsel and candies, and the other is only of tinsel.

Or you can make a Christmas tree from tree leaves. Paint them with some kind of spray paint and glue everything to the same base. It turns out a rather unusual, beautiful tree.

Other original ways to make a Christmas tree with your own hands include foam balls, feathers and sparkles.

With Christmas trees made of feathers or foam balls, everything is clear - we just glue them to the base. But about how to make a "shiny" Christmas tree, a few words should be said: before applying sparkles, apply a mixture of shaving gel and glue (1: 1) to the base, let it dry a little and sprinkle with sparkles. Agree, these trees look very original.

Another noteworthy option is a tree made of cones or twigs. You can make a tree from whole cones.

Or, so to speak, "disassemble" the cone and glue its scales, as shown in the photo.

An unusual tree made of cones is ready.

An equally beautiful and original Christmas tree can be made from sunflower or pumpkin seeds.

Surely it's not a secret for anyone that nowadays you can buy artificial fruits, and from them, as you can see in the photo below, you can make an unusual Christmas tree. Pre-paint the base in a suitable color, allow the paint to dry. Pour fruit over the dried base, decorate the bottom with beautiful twigs, a bow on top and you can surprise loved ones with an original Christmas tree.

By the way, in order to make a New Year's topiary in the form of a Christmas tree with your own hands, a cardboard cone will also work. In general, we are watching a mini master class on creating a New Year's topiary. A cone made of thick paper or cardboard must be glued to a stick (by the way, if you ate rolls the day before, you can use a stick from them) wrapped in twine or beautiful thread. Glue the resulting structure to a glass, fill it with rice, decorate it with tinsel on top. Well, now we are making a Christmas tree directly: glue the cone with lace, paint it and you can glue various decorations (even the most ordinary buttons will do, the main thing is to paint them first).

You can leave the finished Christmas tree topiary in your decor, or you can give it to one of your friends for good luck.

A cardboard cone can be useful not only as a direct base for a Christmas tree. You can glue it over with cling film and wrap it with threads pre-impregnated with glue. Stick on different decorations and allow time to dry. When the glue dries, the Christmas tree made of threads can be easily removed from the cardboard cone, and all thanks to the film.

Or just wrap the cone with wire, the wire with a garland and put on the toys. It turns out quite a pretty Christmas tree.

In addition to the garland, you can use some kind of fabric or lace. It will also turn out to be a very beautiful Christmas tree.

Or you can stick buttons into the foam base. Glue rhinestones or beads.

Or tightly wrap the base with threads and beautifully decorate with buttons.

Buttons can be used not only to decorate the finished Christmas tree, but also to make a Christmas tree out of them, as shown in the photo.

And finally, speaking of unusual Christmas trees, one cannot but recall wooden Christmas trees. Currently, various design models have been developed, which are sold in online stores and ordinary ones.

Are we worse than designers? - You can make a wooden Christmas tree with your own hands. To do this, you will need a sheet of fiberboard and tools in order to cut the necessary parts from a sheet of fiberboard and, preferably, a husband who will do everything.

Or this option, the principle is the same. This beautiful Christmas tree, like the previous one, is assembled from two parts.

If your husband is friends with these types of work, you can persuade him to take on a more time-consuming project: and create this unusual Christmas tree. I hope in the photo of the instruction everything is very clear.

The finished tree is attached to the wall, you can decorate it as you like. You can even paint it in some color, I think it will only get better from this.

By the way, if you want such a tree to last a long time, treat it with protective agents.

In addition, you can use wooden dies, planks, branches, etc. Cut them into different sizes and glue them together or nail them to the base. Get original table Christmas trees.

And you can "string" the dies on a thin base, you get a beautiful volumetric Christmas tree. By the way, its "branches" can be rotated around its axis.

Or here is such a simple option to make an original Christmas tree with your own hands: just dress up the paddon appropriately.

Or use an old wooden door or window shutters.

And here's another tree, for the creation of which sticks left after eating the rolls are suitable.

In addition, you can make an enlarged copy of such a tree.

Too troublesome, but did you like the tree? - Dress up your stepladder, simple and fast.

And for those who have time for a car and a cart, I would like to present the following "masterpieces".

You can get confused and make a weightless Christmas tree. Surely you have a round lattice, and fishing line with hooks is not a scarce commodity these days. The main thing is that the tree turns out to be extraordinary.

An equally magical tree is obtained from a metal mesh, just make a cone out of it, decorate and enjoy the New Year's "magic".

Or you can make an unusual Christmas tree out of wire and a large mirror. It is necessary to make semicircles of different sizes, which are attached to the triangular base, painted with paint. Once the paint is dry, decorate the floor with a garland and attach to the mirror.

We turn on the garland, turn off the light and admire the resulting tree.

In addition to the mirror, you can use an unnecessary picture and create an unusual Christmas tree panel.

In general, you can make a tree out of anything: books, balls, corks, light bulbs, etc. Go for it! And for inspiration, below are a few more photos of unusual trees.

By the way, you can make an unusual one out of an ordinary tree, for example, turn it into a snowman!

These are the unusual Christmas trees that you can make with your own hands for the new year. Happy New Year to you!

Once again, handicraftsmen surprise me: from what people do not make New Year's firs! Some copies are so original that one cannot help but feel respect for the creative author. Many crafts are nice to me, there are some that make me smile, and some are amazing: how could you come up with a picture of a Christmas tree from this? Well, okay, enough prefaces, we still have to watch and watch) For us, the main thing is to look for a suitable idea, at least a little in tune with our tastes, and then, you see, your own imagination will connect, make adjustments) And we will have a completely different craft - the author's ) So, let's see what the people make Christmas trees from?

Let's start with a Christmas tree made of tinsel: the material is inexpensive, the work is simple, it takes little time, and the result is excellent!

To help everyone who wants to make such a Christmas tree - for making.

Christmas decorations

Another simple and affordable way is from Christmas tree decorations, they surely will be found in every home. It will not be difficult to depict the New Year's symbol on the wall (or window, door). You will have to tinker with the volumetric image a little longer.

But the spatial composition looks interesting. And if, instead of threads, you hang the balls on a thin colorless fishing line, the illusion of soaring in the air will be complete.

As a child, we drew Christmas trees in albums, and now we can quite do creative work on the walls of our own house - who will forbid us?

If you decorate a painted spruce tree with real toys or a garland, it turns out very interesting!

Fairy lights

Or you can not draw anything: attach the garland to the wall, giving it the shape of a Christmas tree. A wonderful express option for giving the room a New Year's look.

Don't like the tree on the wall? Then "put" it in the center of the room or in the corner)

By the way, an additional plus - then you don't have to waste time removing toys and cleaning fallen needles)

Perhaps most of the options for homemade trees are made of paper: the material is inexpensive, it's easy to work with it, the result can be very good!

Not only colored paper is used, but also napkins, newspapers, pages from books, cardboard packaging.

You can ignore the drawing of paper at all: a charming Christmas tree can be in pastel shades, and in a bright version, and even monochromatic.

Call for help with any paperwork techniques that are familiar to you: quilling, origami, modular origami, and so on.

And do not try to exactly copy the craft from the photo, let you get your own creation. The main thing is for the process to be joyful and enjoyable.

Christmas trees from books and magazines

Making a desktop Christmas tree from an old magazine (well, what can I do, my reverent attitude towards books does not even allow me to assume that crafts can be made from them), it will take 20-30 minutes, no more. You can accomplish the task even faster by simply stacking the books in a pile, giving it the appropriate shape.

The variant in the middle photo quite accurately copies the shape of the tree, but, in my opinion, is extremely unstable.

I really like the Christmas trees made of buttons - simple, but so cute! Anyone can handle the job, the main thing is the availability of a sufficient number of buttons for the craft. Once I was just about to make a similar Christmas tree, but there were very few suitable buttons in stock. I went to the store, chose the right ones, counted the right amount. Then I came up with the general result - how much it will cost me a set of buttons for the Christmas tree, and changed my mind about making it.

But I think the idea is worthwhile, anyway I will make such a cute Christmas tree someday.

If you like working with beads, ideas for cute miniature Christmas trees will certainly come in handy on the eve of the holiday.

All of them are good, but two beauties left a particularly strong impression (photo on the left). I sincerely admire the author's skill!

A composite hodgepodge of all sorts of trinkets that any woman must have (earrings, hairpins, buckles, brooches, bracelets, beautiful accessories from handbags, and so on). This is where you can find a worthy use of the wealth accumulated over the years!

The Christmas tree from the clock looks symbolic: as if it reminds us of the transience of time, of the uniqueness of each moment. As if he advises not to waste precious minutes on empty grievances and quarrels, but to live them profitably: to enjoy every day, to talk to loved ones about your love, to rush to do good ...

Want a Christmas tree made of ribbons? Easy! All that is required for work is the tape itself, a glue gun, a stand and a base that plays the role of a barrel. First, prepare pieces of tape: for the bottom row - the longest, for the second (bottom) - a little shorter, and so on. Fix the base (wire, kebab skewer) on the stand. Roll up the pieces of tape, apply glue to the edges and attach to the base.

The glue gun can be replaced with simple bobbin threads. Perhaps this will go even faster than with glue: you can attach not one rolled blank to the barrel, but 2-3 at once.

Christmas trees from sesal, jute, tulle

Christmas trees from a grid (sesal, jute) look very impressive. There is no way to buy this material in our village, otherwise I would definitely try to make such a craft.

But I have everything ahead of me: local florists carefully wrap even tiny bouquets in huge panels of such nets) Another couple of holidays, and I will have plenty of material for the craft)

Crafts from tulle look airy and weightless.

It also holds its shape well, does not sprinkle on the cuts, in general, working with tulle is easy and pleasant)

I have no idea where you can find threads on spools of wood now? We certainly do not have such on sale! I have a couple of wooden rarities (still from Soviet times), so that the children at least know what a wooden reel is. If you have such a rarity in abundance, it will not be difficult to build a Christmas tree)

My favorite option is in the center, what about you?

It seems to me that almost no one throws away wine bottle corks) If you have managed to accumulate a sufficient amount - the Christmas tree options are for you!

Even a small one looks good, and a big one - even more so!

An excellent option for New Year's decor, crafts made from natural fibers (threads, twine) look especially stylish: cotton, flax, jute, hemp. The base is made of cardboard (triangle, cone). They generously grease it with PVA glue and wrap it with threads.

The Christmas tree blank is ready! And everyone decorates it to their own taste: beads, cones, flowers, dried fruits - whatever you can find at hand.

Luxurious New Year beauties are made from lace - in my opinion, they don't even need additional decoration.

Variations on a lace theme: with a base of paper and fabric, with fragments cut out of lace.

In the photo there are crafts in pastel colors, but you can make them in any color that will fit into your interior.

Christmas trees made of fabric

Have you saved some pretty scraps of fabric that you can't find a use for? Take a closer look at these pretty Christmas trees - maybe you should make one of them?

The option is even simpler - felt Christmas trees. It is very easy to work with this fabric: it does not slip, the edges do not crumble (do not require additional processing), it holds its shape well.

Buttons, simple embroidery, a few beads - and from a modest craft before our eyes it turns into a stylish one.

In my opinion, these are quite fresh ideas.

I liked the fur craft very much. It's a pity that there is no suitable material, otherwise I would gladly make one.

Christmas trees from separate fragments

There is no limit to the fantasies of the craftswomen) Balls of thin strips of fabric, balls of thread, flowers of ribbons - in skillful hands, everything will fit for making a Christmas tree!

And it can also be made from self-made blanks: bows, snowflakes, pompons, and so on.

Christmas trees made of cones

Even a child can make Christmas trees from cones: paint them green, decorate with beads, put an asterisk on the top of the head, fit a stand. Everything! A wonderful craft from natural material is ready.

Don't like the paint option? Then put them aside: see how charming a Christmas tree made of ordinary cones looks, without any additional decoration. The crafts in the photo on the right seem to be covered with frost: it is easy to depict it using artificial snow (spray). No coveted spray can? It doesn't matter: take PVA glue and a brush, grease each bump and sprinkle it with the material at hand (flour, starch, sugar, salt, soda, grated polystyrene is also possible))) It will turn out just as good!

And if you add a little vanilla to the artificial frost, the Christmas trees will smell of fresh baked goods - a small nuance to create a festive atmosphere.

Nature is an inexhaustible storehouse of ideas and material for creativity! See what can be adjusted for New Year's crafts!

From brushwood, you can make both a small tree and a rather impressive size - in full size.

If the sight of bare branches makes you sad, just decorate them with Christmas decorations.

I liked these vintage plywood trees - they have an inexplicable charm in them. And I would very much like to thank the author of the Christmas tree shelf for the great idea: it is both beautiful and practical, and a festive mood has been created)

And here are the stunningly beautiful Christmas trees made of wood! I would not give up any of them if I could buy. It is not enough to do it with your own hands, there is nothing to try.

The hand of a real master is visible here.

Christmas trees from seafood

If you (like me) like to wander along the seashore in the early morning, collecting shells you like, turned by waves of glass - there is more than enough material for such a craft.

True, I did not come across starfish, but there will be enough shells and glass for a Christmas tree three meters high.

You won't surprise anyone with Christmas trees made of fruits, but nevertheless I included them in the selection, the ideas of execution seemed to me very successful.

For crafts, you can take any fruits, up to dried mushrooms and capsicum, but, as I think, should be mandatory.

Any child's dream)

Maybe we can work as wizards? Children need so little for happiness ... By the way, a Christmas tree can be made not only from sweets.

Christmas trees made from coffee beans

New Year tree ideas for lovers of an exquisite drink. If you want with lace - please, in a stylish snow-white design - no problem!

I guess the dyed grain craft won't be as fragrant as her friends on the left.

The attractive shapes of today's pasta, as well as their variety, have not escaped the attention of lovers of craftsmanship. They quickly found use, including for the manufacture of Christmas trees.

The craft in the photo on the left for some reason reminded of the lost treasures of the Incas)

A lot of time and effort was spent on the construction of bottle Christmas trees.

It's interesting to watch, but for some reason I don't want to repeat)

You know, considering all sorts of ideas, of course, is very interesting, but trying to collect them in one article is unrealistic) Somewhere in the middle of the selection, I realized that it was necessary to somehow group ideas more tightly, otherwise the review would drag on indefinitely)

Christmas trees from what you want

I could not think of a more accurate name for this group of crafts) Well, really, how can you combine all this variety under one concept?

A little imagination, a minimum of decor, and the role of a Christmas tree will be successfully performed by glass jars, flower pots and plastic yogurt cups.

If suddenly you have a lot of wooden rulers and brushes, and you have no idea how to attach them to the case - these are great ideas!

And another practical option) The appearance changes depending on the intensity of the decoration. And if you equip the ladders with improvised shelves, they can be placed on them even for a very large family.

And, if absolutely nothing more suitable was at hand, make Christmas trees from what you have a lot)

Well, have you picked up a suitable idea, wanted to repeat something from what you saw? Not? Then we continue)

A separate section is devoted to metal crafts. I didn't think there would be so many ideas!

And, I repeat, I took only a part, trying to cover as many options as possible. The Christmas tree made of mesh touched, and from the barbed wire - inspired sadness and unpleasant associations.

I noted the Christmas tree made of bicycle rims as interesting and uncomplicated in execution, but I looked at the installation of clothes hangers for a long time, but unsuccessfully: I did not manage to understand how this structure was created.

O! Here are interesting crafts - from horseshoes. If (as the old folk tradition says) even one such metal product is capable of giving a person happiness, can you imagine what will happen to the owner of a whole Christmas tree set? Yes, he simply has to be completely happy all his life) True, only the horseshoes found have magical properties ... So postpone the raid on the nearest stable) Better look for a place where scattered horses constantly lose their horseshoes, then everything will be according to the rules)

And here are a few more ideas for a New Year's symbol made of metal. How do you like works of art from ordinary saws? I was impressed, and how!

And two more pretty beauties.

A fragile Christmas tree made of light bulbs and a miniature techno tree.

But cozy and practical crafts: after the holiday, pillows can be used for their intended purpose)

Of course, you cannot ignore the New Year's money tree)

And do not say that you have absolutely nowhere to put the Christmas tree, or that you are bored with its familiar look. If desired, everything can be solved!

So our review has come to an end. I hope that at least one of the proposed ideas seemed worth the effort and time to create it.

If you are still prettier than an ordinary live Christmas tree, it is not necessary to put a whole tree: from several branches and floral foam (sponge) you can make a charming mini-spruce. Just do not forget to moisturize the foam, then the branches will retain their freshness for a long time (rich color of needles and aroma).

Or just put a few branches in your favorite vase - it's up to you to decide what and how your Christmas tree will be made of!

Go to the competition page - there are also many interesting Christmas tree crafts (and not only)! Very convenient: if you find your own version - a detailed description of the manufacture is attached)

It's a pity, but surely many of the interesting ideas were not included in my collection for a simple reason - I did not see them. Join, supplement the selection with your ideas in the comments, there is still time before the holiday, let there be as many options for crafts as possible! And one more thing: many are ashamed (judging by myself) to show their own works, considering them too simple (ugly, not worthy of attention, and so on). This is mistake! Do not deprive us of the joy and pleasure of admiring your work. Who knows - maybe it is your idea that needlewomen have been looking for for a long time and unsuccessfully, so help them find it!

The article is posted in sections:,