Future mom 

Sew home slippers do it yourself. Home slippers do it yourself. Children's home chuni

Slippers from fur not only look beautiful, but also warm feet in the cold season. Especially they will enjoy children who sometimes simply can not make walking around the house in the room shoes. Soft beautiful sneakers can be bought or do it yourself. The pattern of fur is not very complex and die even novice needlewomen.

What will be the slippers?

Before you start making fur slippers, you need to decide how they will look. The easiest way to construct ordinary slippers. The material will require a bit of material for this, and the pattern of slippers with your own fur in this case is done easily.

You can also make slippers with backs or with an elongated herbal. In such products, even in winter, the feet will be comfortable and warm. True, in this case, the fur will require the efforts and patience, and the material will need a little more.

Screw materials

To make the pattern, you need to have suitable tools and material at hand, from which products will be sewn. It will take cardboard for the manufacture of patterns. You also need to prepare a pencil, scissors, chalk, needles and threads in advance. Often, the pattern of slippers with their own machines from fur is based on the measurements obtained, so the port of the porter meter will take.

Flippers from fur

After pre-preparations, you can start building patterns. Slippers consist of only two parts, so you can construct them in a couple of hours. If the pattern of slip slippers is carried out, it is difficult to guess with dimensions, so it is better to act on a long time-proven schema. The master class will help to cope with this work:

  • it is necessary to put the leg to the cardboard and circle it with a pencil;
  • the resulting figure should be added 2 cm across the circumference;
  • a piece of foot is applied to the top of the foot so that it passes from the fingers to the lifting;
  • in the place of contact with the floor, the leaflet will be bored with a pencil;
  • to the resulting pattern in places where the item will be connected to the sole, you need to add 2 cm;
  • details are cut and copied so that for the left and right slippers were their patterns.

When the pattern of slippers from fur will be made with their own hands, you can proceed to further work. The figures you need to lay out on the material, outline and cut the items. Since each part is divided into inner and external, then for sewing one slipper will need 4 blanks: 2 - for the sole and as much for the top.

So that the slippers were warmer, you can make the insert from batting in the sole. It is better to cut it into a couple of millimeters less across the circumference, then after connecting the parts it will be hidden, and the products will turn out beautiful and neat. The outer part of the sole is better cut out of synthetic or genuine leather, which will increase the wear resistance of the shoes.

The final stage will be the connection of parts. You must first bore the sole and the top of the products with pins, take the connection location and make the edge finish.

Pattern Slippers with Back

Products with backs are constructed by the same scheme as slippers, but still need to add the back item. The pattern of this part can be made in the same way, applying a sheet to the leg, and outline, taking into account the height of the back.

It is easy to make leather items, making measurements. To do this, measure the foot:

  • attach the beginning of the meter to the inside of the foot along the bottom to the place where the upper part of the slipper will be held;
  • clasp the back of the foot;
  • fix the length from the outside of the foot, where the product is undergoing.

The height of the back should be no more than 7 cm, then slippers will be comfortable. Using the resulting dimensions, you need to draw the part on the cardboard, without forgetting to make an increase on the seams. The resulting pattern is applied to the material, the parts are outlined and cut. First, the upper parts are sewn and then join the sole. For one slipper with the back, 6 parts are cut (with insulation for soles, they will turn out 7).

Pattern of slippers from fur with an elongated herbal

The pattern of slippers-boots made of fur make a little more difficult. The soles are created in the manner described above. After that, on the obtained item you need to note the center of the heel and measure the leg throughout the circumference. The paper is drawn a rectangle obtained earlier than the length and arbitrary width (up to 7 cm). It will be the side of the slipper. The length of the foot before the lifting is measured, and the resulting measurement is indicated on the sole, ranging from the center of the sock. A line is carried out in the width of the sole. On this line, the part is bent and transferred to the material: it will be the top of the slipper.

Using the pattern you need to cut the details of the future product. It is first connected to the top with the side part, and its length is measured along the upper circle. This measure is needed to calculate the shine width, the length of which is taken arbitrary. All dimensions are transferred to paper, and a rectangle is drawn. It will be an elongated top of a boot slipper. The top is attached to the previously made top, which is sewn to the sole. In conclusion, the rear seam is stolen. When building the pattern should not forget about the allowances on the seams. For products from fur it is better to make them at least 2 cm.

Finally

The pattern of slippers from fur is easily easily. If still difficulties arose, or there is no desire to bother with measurements, it can be found in various magazines. But there is an important point that it is worth remembering: the pattern of slippers from fur in a natural value will allow sewing the most suitable for the size of the product. Having made a room. Do not have to spend money on her purchase. After all, you can give the second life of a fur coat or a sheep, which has long been dust in the closet.

Having a good pattern you can sew comfortable home slippers with your own hands, because this is the desired thing in any house.

We will work with already existing fabrics, we will not buy anything, we use the material from unnecessary old things, as well as pieces of skin from broken handbags or even shining boots.

In any house there will be skirts, jackets, a drapent coat that thunder is sorry, and you will not be worn. Usually they are lying around somewhere in the bag in the basement. At least I have so.

Even if you have been with pleasure for a long time, there are no good pieces there. We will give unwise, but still very good-quality things a second life.

One Council: If the old woolen sweater was lying on, then it can be saved in the car, dry, stroke - this is a magnificent material for sewing household slippers! Poiled, it is no longer susceptible to sickness.

Here are presented by more three patterns for cutting and sewing soft cozy home slippers with your own hands.

There are some more options for soft slippers with knitting schemes, following the link, you will find both hooked and needles, as well as varieties, for example, with a crochet finish. Sneakers from the application to the old magazine, a photo of poor quality, but convinced that the material is still relevant.

2 sewing schemes from the peasant

Who does not know, there were such magazines in Soviet times for women who were called the peasant and a worker. The name is directly say, not very, but they were loved by many at one time. There were recipes, patterns. It is a pity that there were no good colored pictures, but I was glad that there is.

In general, the materials were very useful, the ideas were inspired by creativity. Since I was in my hands recently a binder of this publication, then I cite something useful.

In almost one scheme, you can sew both ordinary slippers (without backs) and completely closed slippers.

The first model is more open, the second - with the original valve. Size 36-37. If a larger size is needed, then increase the pattern all over the contour. If the foot is narrow, then increase only in length.

The material will suit the easiest, perhaps even, long dusting in the storage room. For the top you need velveteen, drape or soft skin. You can use thin fabrics: fold them in several layers and strain for density. The sole is better made from the skin of old boots or bags.

Inside the slippers can be attached to the insole of their skin, fur, drape.

Details of cutting (1 pcs. - This is for one slipper, without drinks on the seams, we take 0.5 cm):

  • Valve
  • Sole (cut out on the inner contour of the Niza details)

Sealy:

Cut parts made of material. Treat over. Cut over the inside slot for the leg. The inner edge either, either we draw a beautiful braid, edging. You can also make a fluffy fruitful.

Next, we work with the detail of Niza. Cut out separately the sole and glue it with glue type moment. Now you can connect the items and bottom items. First we tighten the detail of the vertex on the outer edge. The same is done with the bottom. Adhesive details should match the point from 1 to 10, which are written in circles.

They will look a little differently - more assemblies on the top of the top and the nasal part of the Niza. We sew them from the face.

You can make decorative seam leather or thick colored thread, cord. Or process braid. One slippers ready. Establish to the second. Just do not forget that the pattern will be inverted with respect to the first.

If you think about itching the slippers with original valves, then cut the part 3. Treat the edge. Sew valve you need to line 11-12. It is fixed by ties attached to the point marked with a cross on the vertex details and the valve itself. The strings can be a continuation of the brain, which is processed the edge.

Option by pattern of borde

The next way to sewing slippers for the house offered at one time the burda magazine. True, because of the pomponov and the sharp, looking up the stretcher, they are more like cryvers. :)

The pattern is simple, first you only need to measure the length of your feet - it must match the length in the diagram. Enlarge in the graphics editor to the desired width and print on the printer.

Black detail - sole, and red - top.

In the picture below, the order of work is shown schematically. Light green designated lining - the inner part, and the color pattern is outdoor.

Increase the pattern of the sole and the vertex to 28 centimeters.

Work description

  1. Cut for each sneaker for two vertices from the material and one sole from the felt. To get shoes on the right and left leg, outrave one sole as on the pattern, and turn another to get a mirror image. Just like exactly with the side parts - two on the pattern, two - along the inverted. Additional cut for each sneaker top and sole from the fleece. It will be the inside, lining. Do not forget the allowances on the seams 5mm.
  2. The sidewalls from the fabric fold face to face, and then sew. Running seams in different directions. Repeat for inner side elements (Fig. 1 and 2).
  3. External and internal sidewalls for each slipper fold and leather face to face, sew along the inner circle (Fig. 3). On the circle to make notches with scissors, turn out, try.
  4. Lining and soles put face to each other. First, sew the sole, and then the seam on the heel (Fig. 4).
  5. Lining and soles to fold together inside the facial sides, flash, leaving a small hole 8 cm (Fig. 5). Connect the heel seam.
  6. Slippers twisted through the left hole, then sew this hole gently manually (Fig. 6).
  7. From the wool to make a pompon, sew to slippers (Fig. 7).

The idea of \u200b\u200beveryone has its own, but there is one element that, like nothing else, reminds of warmth and comfort at home. These are slippers. Elegant, wide, fluffy, felt, knitted - everyone has their own, but necessarily the most beloved. How to sew slippers with your own hands? Is it difficult to make patterns? Answers to these questions and devote our article.

Sneakers are important!

Shoes, boots, shoes are shoes that we select more on the aesthetic parameters, bringing them a sacrifice comfort. But slippers must be primarily comfortable. But this does not indicate that they will be ugly. Even the newcomers will be able to sew home slippers with their own hands to sew home slippers with their own hands.

To begin with, we will determine with the materials from which this shoe can be mastered. The sole is usually made from:

  • skin;
  • spoon (genuine leather without top layer);
  • substitute.

But it is equally important and choose the material for the rack. It can be:

  • rude cloth;
  • suede leather;
  • spille.

Between the sole and the insole for strength is entry to the choice:

  • subtle syntheps;
  • batting;
  • cardboard;
  • porolon.

Supplementing the model by these elements, you will achieve the way that your slippers will serve longer. So, with technical moments decided - it's time to join them the original designer thought.

4 Patterns of cozy slippers

Casters with experience claim to begin their own production of exclusive home shoes better with models from felt. This is an easy to-material, and, if somewhere it turns out to be not quite smooth, or seams, after the first fitting, the slippers will take the shape of the leg, so that the flaw will not be noticeable.

Patterns designed to sew slippers on adults from felt with their own hands, distinguishes one important feature: they do not need an allowance for them, since the material has the property to "escalate" to the shape of the leg. These models are usually sealing without a seal for soles.

Materials:

  • slim cardboard sheet;
  • pencil;
  • a piece of soap;
  • a piece of felt;
  • threads, needle;
  • scissors;
  • decorative elements (beads, rhinestones, etc.).

Instruction:


If you like closed home shoes, then slippers tracks from the fleece - what you need. True, in this case, for the construction of the pattern, only the leg is small, measurements are needed.

Materials:

  • paper;
  • pencil;
  • scissors;
  • tape measure;
  • portnovo chalk;
  • flis cutout;
  • threads, needle;
  • sewing machine (you can do without it).

Instruction:


See also:

Fur Zhersomushki

The models of home slippers and animals won a special popularity. At first glance it may seem that the patterns needed in order to sew slip slippers with their own hands will be complex. However, it is completely wrong.

Materials:

  • thin cardboard;
  • pencil;
  • scissors;
  • threads, needle;
  • a piece of leather or leatherette for soles;
  • slim foam for laying;
  • pieces of fur;
  • decorative elements (beads, pieces of color skin).

Instruction:

  1. Find a foot on cardboard, cut out - the sole is ready.
  2. Strip up. To do this, we draw a rectangle in which the long side is equal to the length of the foot.
  3. On the left on the long side lay the segment equal to the desired sneakers.
  4. Right on the short side below, mark the heel.
  5. We connect with two parallel smooth lines. These marks.
  6. Cut two mirror pairs of blanks of the sole from the skin, leaving 1 cm of the allowance throughout the perimeter.
  7. We make one sole of fine foam rubber, but without "surplus".
  8. By pattern, cut out 2 mirror pairs of top of the sneakers.
  9. We sew the details.
  10. Defend depending on the selected model. For a dog, for example, from pieces of fur make ears, beads indicate the eyes, and they show the nose and mouth with pieces of the skin.

Continue the theme of funny animals can be a pattern of slippers-boots with a hare ears.

Materials:

  • thin cardboard, pencil;
  • scissors;
  • fleece or tight knitwear;
  • felt or skin for the sole;
  • threads, needle.

Instruction:


Today we will sew cozy and very comfortable home slippers!

Since November behind the window and I want to be warm and comfortable to our legs and comfortably, torn our slippers with artificial (and it is possible and natural, it will be gorgeous!) Fur! In such slippers, they are not ashamed and take guests - they look luxuriously, in a boyars! You can sew slippers just from dense fabric or from artificial leather, without an additional decor - they will serve you faithfully for a long time.

So, we will need:

- Cotton cloth jacquard weave for top slippers;

- Tight cotton (I have Ikeevsky) Wheat colors for the inside of the sole;

- Tight cotton for edging Slippers Color coffee with milk (also for edging there may be an artificial leather that we use for the soles, it just didn't fit the color);

- artificial leather for soles;

- tight tarpaulin and a piece of thick shoe leather for the insole of the insole;

- syntheps or any other gasket material;

- glue web and collar Dublerin;

- a small piece of bits or other dense fabric;

- a piece of suede for the heel;

- faux fur;

- Threads, beads for decor, scissors;

- Glue "Moment".

Separately represent the pattern. You can enlarge this photo until the size of the A4 sheet and circle the template directly from your computer monitor. The cross is marked by the inner side of the slipper.

In the master class, a pattern is presented on size 38-39, but it is easy to increase or decrease at your discretion.

The sole will be two-layer - for greater strength and rigidity.

Cut the parts of the top of the sole: 2 details of the insoles of cotton, two parts from the plug-in material, two suede heels, two rectangular pieces of diversified and two details of the insoles made of collar dublerin. Details from Dublerin cut by 1.5 cm smaller around the perimeter so that they do not fall into the seam edge and did not add to us an excessive thickness.

Customize the decorative string of suede heels on the insoles, glit from the opposite side of Dublerin.

We collect "sandwich" - cotton part, layer of gasket, binding. Customize the insole on the contour, cut off too much.

Now similarly we collect the lower part of the sole, only instead of two-inclination we take a more dense tarpaulin, which will give an insole with extra strength and thickness.

From thick shoe skin, cut out a couple of stelek, cutting off the outer cut 1.5-2 cm so that it does not get into the seam edge.

We glue this insole from the inside of the sole - that is, this padling insole will be between the upper and lower layers of the sole.

Now we collect both layers of the sole and steady.

Everything! Our insoles are ready!

Perhaps this technology is sewing the soles around the time-consuming, and you say that you can simply take ready-made soles from old slippers, or a cork sole, or even tissue soles to strengthen with linoleum! Such options, of course, are also quite applicable. But I like such a "puff pastry", I brought his ideal formula by samples and mistakes, sewing a bunch of slippers as a gift to relatives, friends and acquaintances. The sole is obtained moderately dense and thick (the thickness of the sole is about 1 cm), but at the same time mild and pleasant in the sock. And very durable.

Now proceed to the manufacture of the top of the slippers.

In me, I found a section of coupon cotton with jacquard border around the edge. The colors of the fabric is constructed in traditional colors of Khokhloma painting - red, gold and black (I have dark burgundy). After a long twist and reference pattern of the top of the slipper, I was finally determined with the location of the pattern.

Cut the parts of the upper part of the slipper from dilates (with letters along the contour of 1.5-2 cm on the Esnor) and from cotton, observing the symmetry of the position of the pattern on the left and right parts of the slippers. Do not forget on all parts of the upper part of the slipper to put a cross from the inside of the part, to then properly assemble the left sole with the left upper part and the right sole with the right upper part.

We try a piece of fur - it should be beautiful!

Stitching halves. With the help of the adhesive cob, we stick a jacquard part to the base of the two-ones.

Using a template, we equip the top items.

Now we will define the width of the fur rod. I decided that I have fur parts will be 4 cm wide. We supply the top part of the upper part of the slipper, measuring down 4 cm and spend parallel to the top line.

I cut out the details of the edges of the fur, be sure to take into account the direction of the pile - from top to bottom. Fur is dismissed either by the blade or the tips of the scissors, trying to cut only the knitting base of the tissue, and not cut the fur patches.

We apply fur parts to the upper parts of slippers from jacquard and rocking pins. We put on a sewing machine with a wide and tight zigzag stitch and spend on the edges of the fur on top and bottom, while the fur plows carefully bent out from under lines.

It's time to decorate our future slippers beads. I decided to put a bit of red and brown beads on the Pattern of Jacquard.

After a pair of hours of meditative stuffing beads, this is what happened.

We are looking face to face the vertex and wrappers and steal them.

We apply in several points of the allowances on the seam and turn the garment on the wrong side, we release a rope from the vertex detail (fur). Usually I pacing the finishing line at the top of the part. But in this case, we will not do it because of the fur, so we fasten the vertex item and the slap with several hand stitches from the wrong side.

Step the vertex parts and circuit wrappers. We feed the vertex parts to the soles, combining control signs. Slippers are almost ready - they can already try!

Home Slippers are easy to make it yourself, even if you do not have a sewing machine. You can connect the parts of the slippers with manual seams, including with the help of a special selection.
The pattern of slippers is easy to make it easy, it is enough to circle the outline of the foot and experienced by extinguish the top of the slippers. Slippers can be sewed from an old coat, leather jacket, bags, cloth and felt materials, etc.

This master class contains 15 photos, clearly showing how to sew a simple model of domestic slippers with your own hands. The master class also contains a free pattern of 37 sizes.

Pattern Slippers 37 Size


This pattern is designed for a 37 size, but it can be used as a basis for building a different size pattern greater than or less. Pattern is given without letters.
Print these photos (paper format A4) on the printer, cut out the contours of both parts with scissors, and glue these parts of the pattern together, along the red line.


Before cut, make sure that the size of the pattern corresponds to the specified value. To do this, check out another line, distance (20cm) in the photo. If the value is different from 20 cm, you need to change the printer settings.


Such a simple model of slippers is easiest to make felt or boiled felt, but you can make them from trimming skin, cloth and other dense and hard materials.
Children's slippers can be made of covers, artificial or natural fur. For young children, the sole of slippers from fur or sheepskincks is not required to strengthen additional gasket.
The sole of slippers from fur for adults must be duplicated with leather gasket.


This model slippers is pretty simple, so it is desirable to decorate it with its application, especially if the slippers will be children's.


To decorate, it was neatly attached to the surface of slippers, buy an adhesive-based applique in the store.


Appliqué on adhesive basis is installed with a hot iron, as shown in this photo.


When sewing slippers, it is desirable to use durable, thick threads performing simultaneously and decorative function.
Install the number 100 - 110 on the sewing machine, check the maximum stitch length.


So that the finishing line was noticeable, I inserted two threads in the needle and wound a double thread on the bobbing.


Now fasten the edges with clips, as shown in the photo.


Still this seam on the sewing machine with a viscosity from the edge of 0.6 - 0.8 cm.


So that this seam was stronger, it is advisable to repeat the line.


Therefore, lower the needle down and deploy slippers to the other side. Make a duplicate line.


Practically, tailoring slippers on this is completed, it will remain only to strengthen the sole of an additional gasket. By the way, if you do not have a sewing machine, this seam can be done manually, including a marking seam.

How to strengthen the sole of slippers with additional gasket


Slippers must have a durable and stable to wear the sole. When sewing slippers at home, the choice of materials for the sole is limited. Usually for this use dense genuine skin. Cutting the gasket for the sole can be from the top of the old boots or the old leather bag, etc.
If you wish, you can buy a ready-made sole in a micropor store or other materials.


Circuit soles soles on paper, as shown in the photo.


Cut sole can be simply glued with glue.


Now slippers can be worn, without fear that the sole will move.