Interesting Facts 

Pumpkin dolls with clothes patterns. Create (from the pattern to the outfit) Little doll - a pumpkin head of knitwear on MK Julia Titovaya how to sew clothes for pumpkin heads

Today, the pattern of pumpkin heads.

Materials:

  • white calico;
  • cotton of three colors;
  • lace;
  • sintepon;
  • wool for felting;
  • fabric paints;
  • satin ribbon;
  • threads.

Instruments:

  • sewing machine (doll can be sewed and hands);
  • needle;
  • wool felting needle;
  • scissors;
  • needle or chinese wand;
  • pencil.

See also how to sew a doll Lalalupsey -, about the doll T.nech, a - Tilda dolls.

Picture of pumpkin heads.

Circling is necessary by oblique. This is done so that the fabric stretches evenly.

  • White coarse calico fold in front of the face. We carry the classic pattern of pumpkin-headed doll on the fabric - it turns out the body, hands, legs, toes, five parts of the head. The pattern can be changed a little at your request.

  • We cross the body, hands, legs, toes on the drawn contour, not forgetting to leave the hole for turning and packing parts.

Council
Much more convenient to sew the details of the patterns of pumpkin harvesters without cutting, on a whole piece of fabric.

  • Getting stuck. To do this, we divide the syntheps in small parts. The head must be packed very tight, because after toning and drying the syntheps will slightly decrease in size.
  • We cross the head in two details, and then begin to connect everything together. Only in this case the head will turn out to be smooth.
  • It should also be carefully stuffing the neck so that there are no ugly chances and the neck could hold your head. For convenience, it is necessary to use a long needle or a lake wand.
  • Cut out the stitched parts of the patterns of pumpkin heads and make cuts on them around the perimeter as shown in the figure. This is done so that after turning the fabric it has not been tightened anywhere. Especially in flex places.

By the way
If you have curly scissors, you can use them. Then nothing will have to do.

  • When all the details are packed, the holes are sewn the secret seam.
  • The hands are tightly stuffed only to the elbows, and the legs are to the knees (without forgetting before you sew fingers to the feet).
  • This is done by the doll to sit, and the hands did not stick to the sides. Places of flexions of the elbows and knees we flash the limbs bend. We sew all finished patterns of pumpkin heads together.

Next, toning and flavoring a doll. To do this, in a jar, we pour a few hot water, we snatch into it a teaspoon of soluble coffee,
1/2 spoons of cinnamon and 1/2 spoons vanilla. All are stirred and add approximately 100 ml of cold water and 5-b tablespoons of PVA glue.
Glue and water fill before reaching the desired shade and aroma. A better solution is better to strain through gauze to
Cinnamon particles did not remain on the doll. With the help of a sponge, stain a doll.

  • The sponge must be squeezed very carefully. Then the way of the estate after drying will not be stains and sublishes, the color will turn out to be uniform.
  • We put a doll on parchment paper and send to the oven preheated to 100 degrees, until complete drying. Doll constantly turn over.
  • First, the pencil, and then paints on the fabric draw a face with a doll.

  • Wool for felting we divide on strands and needle for felting, we apart it to the head of the doll, forming a hairstyle.

  • Cut the dress with ruffles and decorate it with lace.

I hope the pattern of pumpkin heads came in handy. Good luck!

Good afternoon, dear needlewomen!

In our previous article, we disassembled the difference in Tilde's pupa from other toys. Now let's make the difference between the doll doll pumpkin heads from other cubatilde. A distinctive feature of this cute doll is a big "pumpkin" head, giving it an incredible charm and wanning. In this master class Anastasia Zharikova, you will learn to sew a doll with your own hands - in this article you will find a step-by-step master class on tailoring dolls and video tutorials.

Pumpboards are good because they are very different from factory dolls. Each is unique. On the face of Pumpkin dolls, you can depict any emotion, you can make this doll portrait.

For the manufacture of Pumpkin Dolls, we will need it:

  • Beige Body Fabric Dolls
  • Pattern, pattern can be printed using a printer or draw from the monitor screen.

Pattone Doll Pattern Pumpkin Hand

Picture Pump Couple Pattern Can Print Saving to Computer.

  • Two buttons for fastening the handles
  • Acrylic paints for painting face
  • Pussy
  • Fabric for dress
  • Blush
  • Hair Wool

Doll Tilde Pumpboat Step-by-Step Master Class

Cut the pattern of dolls of the tilde with the help of scissors, apply to the tissue from the reverse side.

We supply the pattern of dolls Pumpkin Pencils.

Cut the cloth with scissors, leaving the allowance of the seam 0.5 cm

We sew the details manually tightly so that when I pack the doll, the parts did not break. Step width 1.5- 2 millimeters.

The next stage of our work is to turn the details of the Tilde doll. Turn the parts with the help of sticks for sushi or something like.

To sew all parts you need to leave small holes for stitching.

The next stage is the filling of the doll by Sinyprun. For packing dolls, we will need about 100 grams of filler.

Put the details, the legs do not need to be stuffing to the very end.

It is important to correct the neck to keep the head well. Part of the filler insert into the neck, stuff it tightly, with your fingers and do not let go. In order for the filler not to be shot down, you can fix it with needles.

The head of the Tilde dolls should also be stuffing very tightly, fixing the needles syntheps in order to fix it and not shifted. In the spout roll the ball from the synthet board, we insert, fix the needle - then the dolls will be convex.

Head of the crafts are stuffed so tight as a sintepon is accommodated. Then the shape of the head of the pumpkin heads will turn out to be smooth, round, the face is easier to paint.

The next stage is the head of the doll Tilda to the neck.

We sew your neck to the head of the poverty doll with a secret seam, since for the aesthetic type of dolls, it is better for the seam to be seen. This is one of the most time-consuming stages of working on the doll with their own hands.

If the seam succeeds not perfect, do not be discouraged - you can always cover the doll with a pumpkin coil with beads or scarves.

Send legs to the body. Torso in the middle is sewn, refuel the edges of the fabric inward, insert the legs and sew them.

Pens leave for later, we sew them to the finished dress of dolls with their own hands.

We sew a dress. For the dress, we will need three fabric rectangles, one of them is 45-50 centimeters in length, and the width will be an exemplary skirt size. Squake the dress to the body, the dress pattern will not need. The sleeves will observe the tissue - in size of the handle.

For the sleeves we turn cloth twice

Apply the handle and circle a pencil.

We flash small stitches. Insert your hand in the sleeve.

We add the top of the dresses, we apply to the body, measure the desired size, we flash.

In the design of dresses for the doll, you can already show yourself, your designer abilities - decorate the dress by sequins, rhinestones, beads, braid ...

The bod of dresses is ready, to the liftime dresses for dolls of the tilde you need to now sew a skirt.

We will make the skirt, seaming the fabric on the thread.

Now wear a dress on a doll. And sew the handles.

This is done simply: sew a button. Determined approximately where the pens in the pumpkin dots will be attached. Needle Take through the body, sew both handles. Two hands of the doll tildes will be fastened with one thread through the buttons.

With clothing, we finished. We proceed to the hair of the doll tildes with their own hands. We plan a pencil where there will be hair growth. Small thin pieces of felting wool, we apart the tilde doll head with an ordinary needle for felting.

How to make hair tilde

As soon as they spoiled the basis for the head, we form hair for a pile of tilda from wool for felting.

Our doll pumpkin heads will be red pigtails.

The tips of the pigtack pupae decorated with ribbons.

We apply a roll of a pumpkin header. Ruddy cheeks are one of the fundamental features of the doll tilde.

How to draw eyes with textile doll.

Let's notice a pencil where we will have eyes, draw a semicircle.

Draw eyebrows and mouth.

Draw an eye protein. The paint is special on the fabric, with time it will not shock.

Draw a rainbow sheath of the doll eyes

Black paint draw the pupil itself.

Combine eye

Draw freckles, mouth, brings for pumpkin pucks

That's such a cutie turned out.

Beautiful handmade dolls with their own hands. They are alive, as made with love, in them a piece of your soul.

Video doll tilda master class

The text has prepared: Veronica

By numerous requests, I present my own sewing textile doll. The master class is suitable for beginners, perhaps, experienced needlewomen will find interesting moments for themselves. So, proceed.

To work, we will need:

Fabric for the body of the doll (I use Korean cotton), pattern, scissors are simple and zig-zag (optional), threads in tone tone, strong threads for sewing legs and handles, two buttons with a diameter of 1.5 cm, two buttons with a diameter of 1 cm, Stuffing wand, bamboo skeleton, disappearing marker or simple pencil, toy filler (I have a holofiber), sewing machine.

Here is my pattern.

The body details are specified size, so the doll will work 24-25 cm. Dotted lines marked the places that do not need to be sewn. Pay attention to the direction of the equity thread (indicated by arrows).

The fabric fold the front side inside and transfer the pattern details. I sewed two dolls at once. I was enough for a cut of 45 by 35 cm. We leave the allowance of about 0.5 cm around the perimeter of all parts, on 1 cm, on the parts of the head of 0.7-1 cm. We flash all the details, except for the head, on the sewing machine (stitch length 1.5 mm ), we leave unimpressed holes for turning. Cut out the parts of the head with the allowances of 0.7-1 cm.

On the details of the head, we sew the swallows, we fold the parts with the front sides inside and flash along the contour, leaving the hole for turning between the wrappers.

Cut the details with scissors Zig patch or make notches in the places of roundings. On the legs we flash the thought part. Turn out the details.

Very tightly stuff your head and body. We sew a hole for packing on your head. Insert a bamboo skeleton with clock down to about about the middle, we bow to the skeleton, leaving 1.5-2 cm. Do not throw away a slamming piece of spanks, it will be more useful for us.

We try our head to the body, mark the place on the back of the head, where the sinking will be inserted. We make a small hole (photo 1). The remaining piece of ships through this hole weching the filler up and on the sides, we spread all the seam elements if they are. You can add more filler if necessary (photo 2). We dress your head on the body (photo 3). We sew neck to the back of the back and then in a circle of a secret seam. Seam on the neck will hide under the hair (photo 4). Front view. Due to the direction of the equity thread, the head shape is extended up. If you cut your head with another direction of the share thread, then the form will be wider and short (photo 5). Side view. Here you can see the shape of the head that should work out (photo 6).

Put the thoughts and heel on the legs. An endback marker is drawing fingers on the right and left leg. Through a hole for packing, we enter a needle with a thread in a finger line and flashing with small stitches back needle, pulling the item.

We flash all your fingers. The legs are squeezed very tight and sew the hole for packing a secret seam.

Also flashing your fingers on the handles. For turning and packing the handles, I use a manicure wand (photo1). Put the handles about the middle. We put the handles, as shown in the photo, and mark the place of attachment (photo 2). A strong thread is two additions in the needle, tie a nodule. We enter the needle in the place of attachment and remove to the hole for packing (photo3). We sew a button, enter the needle through a hole for packing to the place of attachment from the wrong side (photo 4). Tighten the thread, hide a button inside the handle. Cut the tip of the thread with the needle. Button should be inside and two ponytails from the front side, one with a nodule, another, longer, without a nodule (photo 5). Gently pinch the handles to the end, quite a little bit. We sew a hill of the secret seam. It should turn out like this (photo 6).

If you think it is difficult, you can fill the handles to the end and attach them with buttons outside like legs.

Singing legs and handles. Go to the painting.

For painting, I use minimum materials and tools. Acrylic paints of white, black, dark blue (called for some reason blue) and sky blue colors, simple pencil, soft eraser, brush synthetic number 4 and room 1, pastel pencils Koh-i-Noor number 8801 (white), 8802 (red-brown), 8803 (SPIA Light) and Cretacolor Sepia Light Oil Pencil is an oil pastel in a pencil, the color is brighter than 8803, pastel grinds of peach and white, sandpaper, a jar with water and a matte varnish spray ( Not in the photo).

With a simple pencil without pressing, we first draw two circles, it is iris. You can circle a lot of buttons. (Photo 1). Next, draw a foma eye, eyelids and eyebrows (photo 2). Draw spouts and sponges (photo 3). The darkest pastel pencil (this is KOH-I-NOOR 8803) we supply the brow, the middle of the eyelid, eye contours, sponges and nostrils (photo 4).

Take out the contours of the eyes, lips and nose with a pencil Cretacolor. Sponges are painted with a pencil 8802 (red-brown), the upper part of the nose is drawn by him (photo 1). Brush number 4 Rentifying all lines. White pencil paint the eyelids, the tip of the nose and draw glare on the sponges (photo 2).

Acrylic paint white color draw the eye protein. Blue paint - iris. I have a very dark blue paint, so I mixed it with heavenly blue (photo 1). Black paint draw pupil (photo 2). We add a little white to the blue paint and labeled the lower part of the iris (photo 3). We add more white paints and continue to dry the iris (photo 4).

We add white paints to a light blue color and a thin brush we draw small strokes on the iris (photo1). White paint draw glare (photo 2). On the sandpaper we rub the grinds of peach and white color, mix them (photo 3). Brush number 4 Apply a blush on the cheeks. Once again we will supply the contours of the eyes by the Dark Pencil 8803, draw cilia. White paint is almost a dry brush applied glare on the sponge and sponge. Fix painting with matte varnish spray (photo 4).

The legs are sewn with buttons. We strongly tighten and tie the nodules. Embers of the threads hide in the Taurus.

Send knobs.

Long tail thread without a nodule Introduce into one shoulder, the tail thread from the second handle insert into the other shoulder. We associate the ends of the threads with strong nodules, tightly attracting the handles to the calf. Embers of the threads hide in the Taurus.

And here is our doll almost ready!

Send doll hair. How to make and sew your hair, you can see.

So our beauty is ready! It remains only to sew her beautiful outfits. Master classes for clothes for this doll can be viewed in my blog.

Thank you very much for your attention. I will answer all questions.

P. S. When copying a master class, please indicate the author!

Pumpkogolovka can be found in thin handles legs, expressive eyes, triangular nose and red hair. A disproportionately round-headed beauty is often stitched from several wedges, and one of the seams can go in the middle of the face. His funny name of beauty received due to the shape of the head, in the form of a pumpkin. The nose, large eyes and expressive mouth draw on peeping with paints. The pumpkin head came to Russia from America. For the first time, she was made by a 12-year-old girl Marsela, who pulled out the faded doll from his mother from the attic. She re-painted the face and dressed the pupa into a new outfit.

Today's pumpkin heads are very charming, and each endowed with its character and temper.

An attic doll can serve as an excellent gift, as well as a fashionable touch in the interior design.


An old doll doll with a neat apron is often decorated with a heart with an embroidered inscription "I LOVE YOU".

Pattern Pumpkin Dolls

Pumpkin's doll can be sewed yourself, it is enough to choose the pattern and stock the necessary materials.
A big role in the manufacture of beauty plays her base. For the body, the pupa is best suited cotton fabric, such as satin or flax. It is also desirable to take a light or beige shade.
The finished pattern is downloaded to the computer and printed on the A4 sheet. Size can be adjusted independently by setting the desired sheet format.
When transferring patterns on the fabric, pay attention to the direction of the equity thread. From this depends on the appearance of beauty. The cut in the direction of the transverse thread will make the pupa thicker and in short.
Internal seams are processed as follows. The pattern is transferred to the fabric, but do not cut out. Pass over the contour and, leaving the allowances of 3 mm, cut out. Details are turned with a pencil.
In the absence of tissue of suitable color, the base can be painted with welding of strong tea. For 2 liters of water, 4-5 tea bags will be required. 1 meter of fabric is lowered into the boiling solution and boil 30 seconds, removed from the water, lay out to the tray, press and dried on the rope.

Legend patterns:

  1. detail of the body - 2 pcs.,
  2. head detail consisting of 5 petals,
  3. in the figure, two options for hands and legs of 4 parts (in the first version, the fingers are stitched separately).

The variant of the model with a seam on the lear and a small nose.


Pumpboat Matryoshka has no legs, but very stable.


Pump-head doll sizes

The size of the classic dolls created by John Grulem was 40 cm. They were dressed in branded outfits. The dolls had red hair and triangular nose.


Modern pumpkin heads are more likely to make a smaller size, although it all depends on the wishes of the wizard. Before you, the example of a doll of Veronica is 22 cm.

Pattern Pattern Pumpkin Dolls Pumpkin

Employment is an individual question, because each craftswoman creates its exclusive dolls.
Model No. 1 is considered the most common pattern, which is often taken as the basis, slightly reworing under itself.

The pattern can be increased several times, then it turns out such a major beauty.


Pattern number 2 is similar to the first. She has a head out of 6 wedges. Craswance fingers are not cut separately, but flashes thread.


Such a princess will come out, 30 cm high. The elegant dress and linen is removed.

The third model is designed for a small doll, about 20 cm. Its head is performed in a seamless way.

The nose is not drawn by a pupa, and figure the thread. The result should be as follows:

Model # 4 has a seamless head with a convex chin and small ears. The pupa should get a small size.


Pattern number 5 is similar to the previous one, but without ears. The mouth of the pupa can paint the side, thanks to which the model will become mysterious.

The result will be as follows:

Pickhead doll face:

Pumpkin header has a non-standard form. Initially, it is formed according to the template, filled with syntheph or halofiber, and then proceed to tissue tissue into natural bodily shades. For this, natural dyes or a solution of strong tea are used.
Sometimes there are dolls with ears. They are cut separately. It is advisable to fill the filler as close as possible. Because of its structure, the dolls may hang out, so the head is additionally fixed with a support with a lap.
Pumpkin header is very expressive. It is decorated with large eyes, triangular spout, clear lip contour. All parts are drawn with acrylic paints. The occupation is very painstaking, requiring a wizard fancy.
Often there are pupae with glitched cilia and eye-butchers.
There are two types of beauties head design: suture and seamless.

with a seam on the face

Most often, the pupa's head is stitched from several wedges, 5-6 parts, as a result, the beauty of the beauty in the middle turns out with a seam. Such models have convex spouts and chin.


without a seam on the face

Seamless facial formation of two circles that are stitched along the contour. So that when turning the head did not pull on the seam, the zigzag scissors are used for cutting out. The basis is very tightly puffed with filler. The face with this method is smooth, without any convexities.

There are models with heads made of 3 wedges: large and two parts smaller. With this method, the halves are connected on the back of the head and the face is obtained seamless.


Sometimes the face is stained with soluble coffee and diluted PVA glue (1: 1). Some masters in the mixture are added vanilla and cinnamon.

How to sew a pumpkin doll, master class step by step

Pumpkin doll The winter will be dressed in a warm hat, a lush dress and red boots. Her head consists of 3 parts and sews without a seam on her face.
The pattern is given not only on the doll itself, but also on her clothes.


Doll parts are applied to the fabric, the contours are carried to the base. Folded twice fabric, marked with red needles.


According to the contour of parts, leaving the place to fill. At the edges of the bends make zigzag cuts.


Each piece firmly filled with syntheps, edges are sewn. The head is closed on the back of the head. It is desirable to insert a stick-foundation in the middle for fixing.

Furiously paint paints. The eyes of the winter should be clear and large. From above form hairs of arched eyebrows. A blush is applied on the cheek.


Now you can proceed to tailoring. The dresses will consist of a variety of rour. The bottom of the pantalon is decorated with lace, and the belt is a bow.
Hood and scarf are performed from knitwear or knit from yarn. Golfiki make striped, and boots are cut out of dense red cloth.

When the outfit is completely ready, the pupa can be worn.



From what makes hair doll pumpkin head

Hair most often form from colored wool or yarn for knitting. Of course, wool has a great similarity with natural hair, and it is easier to work with her. It is enough to say it to the head of the needle for polling. Such a material is found in any store, it is harder to find the desired shade. A minus woolen hairstyle can be considered that it cannot be combed and changed. At best, you can only carefully sort out your hands.


Hair from yarn has a good volume. They can be laid in different hairstyles and comb. Of course, it is difficult to choose a natural shade of yarn with an easily separated thread.
There are also ready-made puppet creams, wigs and shigns.
Spit is the easiest view of hairstyles for pumpkin heads. To give a shape into the hair, a thin wire is woven. Spit decorate with bows, rubber bands and hairpins.


Realistly, pupae with beautiful curls. For this, the pigtails from the wool of different thickness and length are pre-woven. They are left in this position a couple of days, and then dissolve and cut into separate strands.

Wavy curls in a circle are bought to the head.


There is another way to form curls. Woolen strands, clouded in a special solution of water and plow glue, are tightly wound on wooden sticks. Leave for drying, spin and bought to the head.


Sometimes there are dolls with hair from satin ribbons and Moulin.
The pumpkin header with short fluffy yarns, decorated with fluffy bigudyushki, is originally.


How to sew hands and legs to a doll pumpkin head

There are certain secrets of the attachment of hands and feet to the basis of the pupa.
First, they are sewn similarly to the head of the secret seam - inside the front side with the hole, and then turn. It looks not very beautiful, but under the clothes not noticeable.


In the second case, inside the legs and the handles passes the wire or pin with a disc.


The third method of fastening the limbs is the most faithful - button-native.

At the tip of the hand / legs sew a button, then the thread passes through the body of the body. With this attachment, the doll will be very stable and can sit. The main thing is to correctly calculate the position of the legs. The finiteness with the torso should form one vertical line. With this mount, the thread is tightened tight.

Pumpboat Doll Clothing, Patterns

The appearance of the doll is half depends on the proper selection of the outfit. He must delight the eye and be very bright. Clothes can be removable and sewn.

Fluffy dress

To sew this elegant dress, it is enough to fit the pattern under your doll size and carve out the details.

The puff is the dress attached a fit of the fate. The outfit is decorated with lace.



Removable elegant dress

Pattern is given on the standard pumpkin head. The front part of the dresses will be single-circuit, the fastener is located on the back.

For the skirt, two strips of multi-colored fabric will be required (40 cm in width). The outfit consists of two layers, the bottom is decorated with lace.


Warm blouse
A model of two identical parts is sewn, only the front part is cut in half.

The front side sections are tailored under the clasp. The blouse will complement the pockets, and the edges go through zigzag scissors. At the top you can sew a button.

How to sew a sports suit for pumpkin doll

Modern masters dress their pumpkin heads in tracksuits. Seam such an outfit will not be much difficulty.
For pants will need a square knitwear. The template is transferred to the fabric, paste and cut out. The bottom is stunted and the top is fed. The top tighten the fine gum or the rope, with which the pants are fixed on the doll.


T-shirt make a non-removable. In front and behind, it looks equally, only the neckline of the neck is a little deeper.

And here is the pattern of the most sporty costume.

Decades of Pumpkin Dolls inspired puppeteer artists for new creative ideas. Try and you may, your work will be no worse than the famous masters.

In this master class, we will tell you how to properly sew a pumpkin head doll. This name, the doll received because of the features of the shape of the head. It consists of wedges, and the shape of the head resembles a pumpkin.

We need:

  • fabric for doll (this doll is sewn from satin - stretch);
  • sintepon;
  • x / b yarn for hair;
  • coffee, vanillin (for tinting dolls);
  • pattern of dolls;
  • threads and needle;
  • foam sponge;
  • baking paper.

Step 1.

According to the attached scheme, you need to draw a pattern (doll parts). On the patterns of all the details, you need to add a few centimeters for seams. Since the bunny is attached to the doll, then there is a pattern for a bunny too. It can be sewn from an ordinary towel, and then toned with conventional acrylic paints. Step 2.

When all the details of the patterns are cut, they need to sew. Details for legs and hands, stitched by side seams. The torso is also stitched along the side seams, but you need to leave the holes where you will sew your hands and legs. Head for doll, stitched from six parts. But at the junction of wedges, at the bottom of the head, you need to leave the hole. Through it, you will need to turn off the blank for the head and fill it with a synthetic tube. Came of dolls are completely. You can then insert a doll and sew a secret seam.
Step 3.

All stitched details, you need to fill with Sinter. You can use synthepes or even holofiber as a filler. Handles for the doll, you need to fill with a synthet not very tight. It will help to be more movable hands. Then you need to fill the torso sinteration and sew handles to it. Now to the body you need to sew legs. They need to sew without stop. Now bring the legs with syntheps, but only to the knees (you need to fill the top of the legs).
Next on your knees, you need to make transverse seams. It is needed for what you could bend the feet doll. Then fill the rest of the legs and the foot of the foot.