How to knit beautiful women's gloves. How to knit women's, men's and children's gloves with knitting needles with a description? Knitting pattern for gloves: patterns

07.08.2019

Gloves are a beautiful and useful thing. They can not only warm, but also decorate, make the image more sophisticated, calm, or vice versa - bright, catchy. Especially a wide variety of models for all seasons and occasions are offered by crocheted gloves, which create worthy competition for models created with knitting needles.

It is due to this method of execution, gloves can turn out to be both dense and textured, as well as the thinnest, openwork. Of course, the yarn you choose will be the decisive factor - it is she who is responsible for the warmth, thickness and degree of openwork of the product. Such a variety of knitting possibilities allows you to get equally beautiful gloves for women and girls, comfortable and practical gloves for children, and warm gloves for men.

Crochet gloves - diagram and description

Let's take a closer look at the most common options for crocheting gloves, including how to knit products for beginner needlewomen. We will also learn how to crochet mitts - fingerless gloves, and we will analyze in detail the methods of knitting men's, women's and children's gloves.

Knitting for beginner needlewomen

Crocheting gloves provides the ability to create fairly thin, but dense and warm products. Let's try to create one of these, while performing a simple pattern of the same type.

Knitting crochet gloves for beginners starts with definitions hand measurements ... You can do this as follows: circle your palm with a pencil or pen on a piece of paper. Now, in accordance with the diagram, we measure the following indicators:

A- the width of the palm at the base of the fingers (the approximate width of our glove); B- the distance from the base of the palm to the bend of the thumb; C- the distance from the base of the palm to the tip of the middle finger (the length of the glove without the cuff); D-distance from the base of the palm to the base of the little finger.

Materials for work:

jersey;
hook number 2.5.

Progress

We collect a chain of air loops equal in length to the circumference of the wrist + 1 cm for free dressing of the glove. We connect the chain into a ring with a connecting post and to start knitting the first row we make 3 lifting air loops.

First row knit st. s / n and end the row with a connecting loop in the last lifting loop. Next for knitting second row make 2 air lifting loops and knit an elastic pattern, alternating convex and concave embossed posts. End the row with a connecting loop as well. Next rows knit elastic bands as the second. The cuff of the glove is knitted with a pattern elastic band at your discretion can be of any width from 4 to 6 cm.

Then we move on to knitting. the main body of the glove... We knit the glove with half-columns in circular rows in a spiral, that is, we do not make lifting loops, then the seam of the initial loops of the row will not be visible.

For yourself, outline the sides of the glove, where the thumb will be located, and where the little finger will be.

Having connected 2-3 circular rows with half-columns along the side at the side of the thumb, we begin to make additions to expand the wedge of the thumb. To do this, in the next 5-7 rows, add one half-column, knitting two from one loop.

When the knitting height reaches the base of the thumb in the last row, without tying 6-7 loops to the edge, we collect a chain of 8-9 air loops and fasten it into the arch through 12-14 loops of the previous row. Thus, a hole for the thumb is obtained, which is knitted last.

Before knitting the fingers of the glove, calculate the loops for each finger. You can identify them by trying on a glove and noticing the loops on the inside and outside. To knit the little finger, attach the thread from the side of the palm, make 3-4 air loops and attach the arch to the back of the glove. Next, knit half-columns in a circle to the height of the little finger.

Closer to the tip, make subtractions on both sides of the finger to constrict. When knit your finger to its full height, close the loops, knitting single crochet in a circle - one of two loops. When the hole narrows, cut the thread, secure it by pulling the tip through the loop. Insert a needle into the remaining end of the thread and darn the remaining hole, thread on the wrong side.

If you look at your hand, you will see that the fingers are located at different heights of the first little finger, just above the index, and the middle and ring fingers are at the same level. Therefore, after knitting the little finger, go back to knitting the main part of the glove. Taking the left thread into work, tie one circular row with half-columns along the inside, the arch at the base of the little finger and the outside of the glove. Now you can knit your ring finger. Attach a new thread to the inside, tie a chain of 4 air. loops and fasten the arch on the outside (photo 1).

Knit half-columns to the height of a finger, narrow it at the top, making subtractions along the sides. Finish knitting the same way as on the little finger - make subtractions by knitting two single crochets together until the hole narrows to a small hole.

Take the left thread of the main part back into work and knit one circular row through the arch of the ring finger. Next, attach the thread for knitting the middle finger. If at the base you get a large hole for the finger, then make subtractions in the corners, knitting two half-columns together (photo 2).

Knit the index finger with the left thread from the main part of the glove. Attach the thread for knitting the thumb and knit in a circle with half stitches, making a decrease in the corners first, knitting two half stitches together until the hole is equal to the diameter of the finger. Next, knit it high and narrow it in single crochet stitches.

The glove for the other hand is knitted in the same way, but in a mirror image. The back can be decorated with a knitted flower or embroidery.

Fingerless model

Very popular nowadays fingerless gloves, also called mitts, allow you to drive and use your phone quickly and without discomfort. In addition, the process of knitting this model is much easier than knitting simple gloves - you don't need to work with each finger separately. , since they are knitted both for the summer season and for the winter. Let's take a closer look at how to crochet gloves without fingers, which look very impressive in autumn and winter.

Materials for work:

yarn "ADELIA Jessica" (67% wool, 33% polyester, 260 m / 100 g);
hook number 3.

Progress

To begin with, you need to dial a chain of air loops of such a length that four fingers easily pass into it, folded in half. We will knit a mitten from top to bottom - from fingers to wrist. We will close the chain in a ring with the help of a connecting post, we will knit two lifting air loops and then three rows of single crochets (photo 1).

Next, we move on to knitting with lush columns. A fluffy column is three or more "loose" double crochets, knitted at the end in one loop. In this case, the lush columns consist of exactly three "incomplete" double crochets. To make a lush column, we will make a yarn over, insert the hook into the loop of the previous row and draw out the thread. We will knit the thread into the resulting loop and yarn (photo 2).

The hook has two loops. We will again make a yarn over and again we will "loosely knit" a simple column with a yarn over (photo 1). There are three loops on the hook (photo 2). Let's repeat everything once more - there are four loops on the hook (photo 3). Finally, we knit all four loops at the same time (photo 4). The lush column is ready!

We knit three rows of lush posts, then three rows of single crochets, then two more rows of lush posts. In principle, the alternation of different knits can be anything - it all depends on the taste and desire of the knitter.

We come to the base of the thumb. We knit a chain of fifteen air loops and attach it with a connecting post to the main knitting four loops from the beginning of the chain. Let's try a mitten - the thumb should pass freely into the hole intended for it. If the hole is smaller or larger than you need, change the length of the chain (photo 1).

Let's continue knitting in a circle with single crochet - only the row has become fifteen (in this case) loops longer. Here it is more convenient to knit in a spiral, without lifting loops (photo 2).

Having knitted two rows with single crochet, we begin to make subtractions. It is best to do them like this: evenly subtract four loops in a row - knit the next row without subtractions - subtract four loops again - knit a row again without subtractions. In total, there are four rows with subtractions. Having finished decreasing, we will knit another four or five rows without decreasing. Finish knitting with five rows of embossed columns.

The details remain: the upper part, as well as the hole for the thumb, can be arranged next to a "picot", having previously knitted two or three rows of single crochet stitches. We will knit the second mitt in the same way as the first. A pair of fingerless gloves is ready!

Master class - how to knit men's gloves

As a good gift for a dear person, you can crochet men's gloves. This will not take much time and effort, especially if you work according to the master class on crocheting gloves. In this case, we are talking about beautiful gloves that will look great in a monochromatic moderate color scheme, preferably black, gray, dark blue.

To begin with, you should also trace the outline of a man's hand on paper, or measure his old gloves.

Materials for work:

thin acrylic or semi-woolen yarn;
hook number 2-2.5.

Gloves are knitted crosswise from the little finger to the thumb. One glove consists of two parts: the back with four tied fingers and the inner one with a knitted fifth thumb. We sew the finished halves of the glove, finally, tie the cuff along the bottom with an elastic band made of embossed columns.

Progress

Cast on the initial chain of air loops from the beginning of the cuff to the tip of the little finger along the pattern. Next, knit the rows in single crochet stitches across the width of your little finger. Begin each new row of posts with one air lift loop.

When knitting stitches w / n in the direction of the fingers, tie to the base of the ring finger and dial a chain of air loops up to the tip of the ring finger.

The inner half of the glove is knitted in the same way as the back half to the middle finger. At the beginning of knitting with the index finger, in a row of stitches in the direction from the cuff to the fingers, tying the stitches to the base of the thumb, cast on a chain of air loops equal to twice the length of the thumb. Close the chain in a long loop, continuing to knit the columns along the row to the base of the index finger, then dial the chain of air loops to the length of the index finger.

Tie several rows of single crochets, first along the chain of the index finger, along the row of the hand to the loop of the thumb, then along the chain of the thumb and then to the cuff. Turning the work, knit the stitches in the opposite direction until you knit the strips about the width of the index and thumb.

Fold the two halves of the glove, the back and the inside, together. You can connect them by crocheting a row of connecting posts along the contour or simply sewn with a needle, also sew the sides of the thumb. Turn the sewn glove on the other side so that the seam is inside.

On the bottom of the glove, first knit a row of double crochet, then two rows of embossed columns, alternating convex and concave. Knit the second glove in the same way, only when sewing, place the parts so that the thumb is on the other side.

How to knit fishnet gloves for a woman

Replenishing your wardrobe with gloves is always a great idea, because they are the ones that warm your hands and complement the female look in the cold season. Even needlewomen can do it with their own hands without much experience, you just need to choose a detailed knitting pattern with a description. Let's consider how to create openwork crochet gloves with step by step photos.

We make measurements

Using the method of measuring the hand indicated at the beginning of the article, we determine the size of future gloves. Now you need to calculate the required number of loops. Usually, in the descriptions of knitting gloves, they mention how many loops are contained in a sample of 10 * 10 cm.However, you can make it easier: knit a small sample (10-15 loops, 4-5 rows) and find out how many elements are in whole centimeters.

In this case, there are 3 double crochets in 1 cm, that is, initially 3 air loops. The width of the glove is 8 cm, which means 8 * 3 = 24 (1 more loop is added for the symmetry of the pattern = 25).

Knitting pattern for gloves

Rice. 1: Knitting pattern for the upper part of the right glove; Rice. 2: Knitting pattern for the bottom of the right glove.

Rice. 1: Pattern of knitting the thumb of the glove; Rice. 2: Knitting pattern for the cuff of the glove.

Progress

We begin to knit the upper part of the glove of the right hand. We collect a chain of 25 air loops + 3 air loops to go to the next row. We knit 2 rows with columns with one crochet in each loop (photo 1).

In the third row we knit 6 double crochets, then we begin to knit the pattern: we skip one loop, in the next we knit a “fan” of 6 double crochets, we skip one, two double crochets. We repeat the pattern element 2 more times and end the row with double crochets (photo 2).

We knit 8 more rows with the pattern, or as many as you need for your hand size - try on to know for sure. In the next row above the extreme “fans” we only knit 3 double crochets, through one loop (photo 1).

We knit another row with a pattern element in the middle. Then 2 rows of columns with one crochet. At this stage, the length of the part should be equal to the distance from the base of the palm to the base of the little finger ( d).

Now you need to distribute the number of loops for each finger: 25/4 = 6 and one loop in stock (6 - on the index finger; 7 - on the middle; 6 - on the ring finger; 6 - on the little finger).

We knit 19 columns with a crochet, since the little finger is located slightly lower than the other fingers - we leave 6 loops for it.

Go to the next row and start knitting the ring finger. In this case, there are only 10 rows of 6 double crochets. Finish with a fan of 6 double crochets in a loop in the middle of the row, fasten and cut the thread. At this stage, it is important to try on the part to the hand in order to find out the desired length of the fingers.

We knit the middle finger in the same way. In this case, there are only 12 rows of 7 double crochets. Finish with a fan of 6 double crochets in a loop in the middle of the row, fasten and cut the thread.

We knit the index finger in the same way as the ring finger.

We knit the little finger. In this case, 7 rows of 6 double crochets. Finish with a fan of 6 double crochets in a loop in the middle of the row, fasten and cut the thread. The top of the right glove is almost complete.

We tie the piece in a circle with single crochets (2 single crochets for each extreme column, tops of the fingers - 1 column in each loop and 1 column in the spaces between the fingers for a beautiful turn).

Now is the time to move on to knitting the bottom of the right glove, in accordance with the patterns above.

We collect a chain of 25 air loops + 3 air loops to go to the next row. We knit the lower part of the glove with double crochets. We knit so many rows that the length of the part is equal to the distance from the base of the palm to the bend of the thumb ( v). In this case, 10 rows (photo 1).

In the next row, we leave room for the thumb. We knit 2 double crochets, skip 8 loops (or how many you need, try on) over them we knit a chain of the same number of air loops and continue to knit with crochets. In the next row, in each loop of the chain, we knit 1 double crochet.

We knit to the base of the little finger. In this case, 3 more rows. We knit the little finger. Then we knit a row of 19 double crochets (photo 2). Then we knit the rest of the fingers in sequence: index, middle, ring.

We knit a thumb. To do this, we fasten the thread to the column adjacent to the place for the thumb, knit 3 air loops. Then, 8 double crochets in each stitch and another double crochet behind the adjacent stitch. In the next row we subtract one column, in the next row another one, up to 8 columns (if the base of the thumb is wide, you can knit 2 rows without subtracting the columns). In this case, there are only 8 rows. Finish with a fan of 6 double crochets in a loop in the middle of the row, fasten and cut the thread.

Tie the other half of the thumb in the same way. And tie the details with single crochet.

Another interesting model of knitted gloves is thin openwork. They are suitable for both girls. and for girls. Beautiful, light, gentle - they are perfect for a beautiful outfit for a matinee, graduation party or any other celebration. A detailed master class will help you learn how to crochet children's gloves.

Materials for work:

cotton threads # 30-40;
hook number 1.

Progress

We start knitting gloves from the fingers. To do this, we knit 8 sts b / n into the initial ring, tighten the ring, make a connecting loop in the first column and begin to knit with arches from 3 air. loops around the cylinders, tying the index and middle fingers, try on the cylinders to be knitted and add arches to the base of the finger.

Connect the finished cylinders for the index and middle fingers, and tie around 1-2 rows of the main pattern.

The next cylinder on the ring finger, also attach to the side of the middle finger and tie around the now 3 cylinders.

Then turn for the little finger, attaching the little finger cylinder, tie the main pattern around the palm, do not forget to try on the glove during tying and, if necessary, subtract the arches between the fingers on the inside of the palm.

Tying the glove to the thumb, attach the tied cylinder and continue the strapping, decreasing one arch in each row on the inside of the palm from the point of attachment.

Having tied to the end of the palm, stop making subtractions and knit in a circle to the required length of the glove, then tie the edge with a beautiful border according to this pattern:

Video tutorial

A video master class will help beginner needlewomen to quickly master the technique of crocheting gloves. This will save time and prevent beginners from making mistakes. The video shows the option of knitting mittens-mittens - another interesting way to combine gloves, mittens and mittens.

Gloves are a very useful thing in the winter season and are very comfortable. It is optimal to have several pairs of gloves in your wardrobe for different occasions: for work, for walking and insulated gloves for cold days. And if the needlewoman knows how to knit gloves, she can easily replenish the family wardrobe with a variety of knitted gloves. The training course will tell you how to knit gloves quickly and easily. A photo and a detailed description will help to cope with this task. And any, even the most novice craftswoman will be able to knit gloves for herself, as well as for her husband and children.

Materials and tools for knitting gloves

To knit standard size gloves you will need medium yarn (75% wool and 25% polyamide, 210 m / 50 g) and a set of knitting needles. Stocking needles are available in various designs, namely: metal coated or wooden (bamboo, rosewood or ebony). For knitting gloves, we took sets of long and short stocking needles made of wood. Wooden knitting needles are convenient in that, unlike metal knitting needles, they hold more firmly in the hinges and do not slip out of them. In addition, wooden knitting needles are very lightweight and are especially suitable for allergic knitters.
For knitting gloves, knitting needles are used 15 cm long, for knitting fingers - 10 cm long, which makes it easier to knit small parts ( Figure 1 knitting needles in the middle and left).
Gloves can be knitted with metal knitting needles, if you do not have wooden knitting needles.

Knitting technique for knitting gloves

Gloves can be knitted with a variety of patterns. The most common option is when the upper part of the gloves is made with an elastic band (alternately 1 front, 1 purl or alternately 2 front and 2 purl), and the rest of the front satin stitch.

Knitting density of gloves:
To make sure your gloves are sized to fit the model, a check pattern should be made before knitting. For the specified yarn, the knitting density of the sample made with the front satin stitch is: 30 loops x 42 rows = 10 x 10 cm.

A set of loops for the initial row of gloves:
Cast on 2 knitting needles the required number of loops (for our model 56 loops), then pull out one knitting needle and distribute the loops evenly over 4 needles = 14 loops per needle.

How to knit a glove cuff:
Close the loops into a ring ( picture 2) and knit the cuff with the selected pattern of the desired length ( picture 3).
How to knit a wedge of the glove's thumb:
After the cuff, first knit 4 rows with knit stitches. The first 28 stitches of the row form the inner side, the last 28 stitches form the outer side of the glove.
For the wedge of the right glove, mark the 2nd and 4th loops of the inner side, in the next row after the 1st marked loop and in front of the 2nd marked loop from the broaches, knit 1 front crossed loop.
Then add 2 more loops in each 3rd row 3 more times, as described above, then add in every 2nd row until the initial total number of loops increases by about 1/3 (in our example = 17 loops wedge).
Run 2 more rows without increments and leave 17 wedge loops on an auxiliary thread or safety pin ( picture 4).
How to knit the glove's thumb jumper:
Above the left wedge loops, dial 7 loops for the jumper ( picture 4) and on all loops, knit 1 row with front loops.
Then, over the jumper loops, tie a small wedge: in the next row, knit the 1st jumper loop and the previous loop together with a tilt to the left (= remove 1 loop, as with knitting, knit the next loop with the front loop and pull the removed loop through it), the last loop of the jumper and knit the next loop together with the front one.
Repeat these decreases in every 2nd row until only 3 jumper loops remain. Knit these 3 loops in the next row together (remove 1 loop, as in knitting, knit the next 2 loops together with the front one, then pull the removed loop through the knitted one).
On the needles, again the original number of loops ( picture 5). On these loops, knit about 15 more rows = 3.5 cm to the beginning of the little finger. It is recommended to try on the glove to determine the exact length to the little finger.

How to knit a pinky glove:
The last 7 sts of the inner side and the first 7 sts of the outer side are transferred to the short knitting needles. Knit these loops and cast on 2 loops for the jumper between the outer and inner sides.

Distribute the loops evenly on 3 short knitting needles and knit in a circle with the front loops. The length of the finished little finger is about 6 cm.
Without tying 1 cm to the end of the little finger, for the tip of the finger in each row, knit the last 2 loops of each knitting needle together. Pull the remaining 6 loops with a working thread, fasten the thread on the wrong side.

Then knit the first 21 loops on the inside, pull 2 loops from the jumper of the little finger and knit the remaining 21 loops on the outside. On these loops, knit 4 rows = 1 cm with front stitch ( picture 6).
How to knit the ring finger of a glove:
Take the last 6 sts of the inner side, the next 2 sts and the first 6 sts of the outer side on short knitting needles.

Knit these loops and cast on 3 loops for the jumper between the outer and inner sides. Distribute these 17 loops evenly over 3 knitting needles, then knit in a circle with front loops ( picture 7).
Finished toe length approx. 7 cm.

How to knit the middle finger of a glove:
Take the last 7 sts on the inside and the first 7 sts on the outside on short knitting needles. Knit inside loops with front loops, pull 3 loops from the jumper of the ring finger, knit the loops on the outside and dial 3 loops = 20 loops for the jumper.

Knit in a circle with front loops. Finished toe length approx 7.5 cm.
Leaving 1 cm away from the end, follow the tip of the finger as described for the little finger.

How to knit the index finger of a glove:
Knit the remaining 7 loops on the inside, pull 3 loops from the jumper of the middle finger and knit the remaining 7 loops on the outside.

The gloves are knitted in a circle on 5 knitting needles # 2 from the “Competitive” yarn - Pekhorka in 2 threads, 150 gr. (3 pairs of gloves take 5 skeins of 100 grams each.) You need to stock up on safety pins in advance for temporary removal of loops - 10 pieces.

Before knitting, you need to put your palm on a sheet of paper and circle it with a pen strictly perpendicularly. You can circle the left and right hands separately, but the right is enough. What is it for? Gloves sold in stores are knitted on standard hands and often do not take into account the anatomy of real people: - then the thumb is tied strictly on the side of the glove, while the thumb muscle in most people is attached in the middle of the palm and the finger is more willing to bend towards the palm; - then the fingers of gloves (for the index, middle, ring and little fingers) begin at the same level, although such people are extremely rare. This is why gloves work best when knitted for a specific person.

In addition to drawing the palm, several measurements still need to be made:
1. The girth of the wrist, in this case - 19 cm;
2. The circumference of the palm, in this case - 22 cm;
3. It does not hurt to measure the thickness of the fingers (at the widest point), in our case - 8; 7.5; 7.5; 7 and 7 cm.
It is better to put all measurements on the drawing so that they are at hand. The knitting density and the required number of loops are determined along the circumference of the palm. For gloves of this size, these knitting needles are made of 44 loops.

Description of knitting gloves

Cuff - 44 loops are typed on 4 needles, 7 cm is knitted with 1x1 elastic.
Palm - after the cuff, knitting of the palm with the front stitch begins, but in the very first row I have subtracted 4 loops (1 on each knitting needle, knitting the front with the front together with the front one), it turns out 40 loops. In the next row, on one of the knitting needles (you decided to knit the left or right glove first), knitting of a wedge for the thumb begins. The addition is performed by 2 reverse yarns between 9 and 10 loops in each 3rd row (see figure - left thumb, for the right hand - symmetrically between 1 and 2 loops). Checking the palm pattern, we determine the height of the wedge for the thumb (on the other knitting needles, knitting with the front stitch without additions).

Loop legend for schematic

Facial;
= yarn;

Upon reaching the desired height, remove all the loops of the thumb wedge on safety pins, including 9 and 10 loops (for the right glove 1 and 2) for further knitting of the thumb (14 loops in total). To compensate, cast on 2 air loops over the pins and continue knitting on 4 needles (10 loops each) until the gap between the little finger and ring finger is reached.
According to the calculated knitting density for one finger, 16 loops are needed (in the described version). 6 loops for the little finger are removed with safety pins from the knitting needle opposite the thumb, and 6 loops from the adjacent knitting needle. To fill the gap between the pinky and ring fingers, we collect 4 air loops. The distribution of the knitting gloves and the number of additional loops are shown in the table.

Distribution of glove loops when knitting fingers

Since the little finger is closer to the base of the palm than the index, middle and ring fingers, we knit 2 more rows with the 40-6-6 + 4 = 32 loops available on the needles (referring to the hand drawing), for free movement of the little finger.
After knitting two rows for three fingers, 12 loops for the index finger are removed on safety pins, and 12 loops for the ring finger (with 4 additional loops of the gap between the fingers). For the gaps between the middle and forefinger and middle and ring fingers, 4 more air loops are recruited.

Middle finger - the resulting 16 loops are knitted on 4 knitting needles to the required length (referring to the picture). Closing the finger is done by knitting two loops together on each knitting needle, the remaining 4 loops are gathered together, fastened, the thread breaks.
Forefinger - to the 12 loops removed from the safety pins, we collect 4 more loops from the same air loops of the gap between the middle and forefinger. The dialed 16 loops are distributed on 4 needles. The index finger is executed in the same way as the middle finger.
Ring finger - the existing 12 loops are removed on the knitting needles, 4 more loops are drawn to them from the same air loops of the gap between the ring and middle fingers, then everything is done as for the middle finger.
Little finger - 12 loops are removed from safety pins on the knitting needles, 4 more loops from the air loops of the gap between the little finger and the ring finger are recruited to them. Further - as for the rest of the fingers.
Thumb - remove 14 loops from the safety pins onto the knitting needles, cast on 6 more loops: 2 of 2 air loops, made above the wedge for the thumb and 2 from the gap between the removed and air loops. Distribute the resulting 20 loops on 4 knitting needles and knit 3 rows, after which we make a decrease on each knitting needle (2 together with the front one). This trick will allow your thumb to move freely. Next, from 16 loops, we knit the thumb to the desired length, we complete the finger in the same way as the others.

The second glove is similar.

The ends of the threads on each finger are crocheted to the inside and secured.

Those. you, not knowing how to knit on stockings or circular knitting needles, will be able to knit a wonderful thing for yourself and not only for yourself! A distinctive feature of this knitting method is that you can knit anything on the back of your hand. From jacquard to beaded knitting. That is, due to the fact that knitting always goes in a straight line, you can improvise as you like. Materials and tools. Yarn 100% wool 100gr = 300m.

Knitting needles # 2.0 10 safety pins.

Let's get started

On the knitting needles, we collect half of the loops of the amount that you would need for a mitten cuff or gloves on stocking (circular) knitting needles.

ATTENTION! an odd number, if a pattern or ornament with a central loop is expected, and an odd number, if such is not expected.

I have 29 loops. Right hand glove.

after the typesetting row, we knit the first one with PURPOSE loops. In order for a beautiful scar to form on the face, which we will then sew with a needle.

Then we knit with the front stitch as much as we want for a beautiful hem of the gloves. I have it 1.5 cm. And we knit the last front row (for 29 loops) Cr, * 2 together with the front one, yarn * until 2 loops remain on the left knitting needle. 1 persons. 1 marginal.

Turned over and knit the purl row with all purl.

it turns out a row with "holes", which will be a beautiful edge of the cuff

We knit cuffs. I draw your attention, when knitting is done with only two threads, then we pin the non-working ball with a pin so that the threads do not get confused.

Having tied the cuffs, we proceed to knitting the thumb.

Without reaching one loop to the end of the front row, we begin to make increases for the thumb.

We knit the penultimate loop with the front one, and then we knit an increase from the lower loop, too, the front one.

In the same place to get a clear line of increases.

Thus, adding one loop in each front row, in the same place, you will get a beautiful line of thumb increases.

So add loops until it works: 10 loops on the thumb + 1 loop + 29 on the back of the hand:

Purl row knit only 10 loops (this is the thumb) and remove these loops on a pin. Then we knit a middle loop and remove it on a pin (you can use a marker). And we knit further 29 purl loops. We turn it over and further to the beginning of the little finger we knit the fabric with a straight front satin stitch. If you want to embroider something, or somehow decorate the glove in another way, now is the time. I have a cornflower tied with jacquard on my gloves

Having tied it up to the beginning of the little finger, you need to distribute the loops over the fingers. I have 29 loops. I distributed it like this. little finger-7 loops, ring and index -8 loops. middle-9 loops. And between them one loop. 32 loops. The discrepancy is explained simply.

There are gaps between the toes. If they are not filled, there will be holes. I will tell you how to avoid them.

In the photo above, there are 6 loops on the little finger. And THREE is knitted from the next loop. :

Of these three loops, the first will go to the little finger, like the seventh, the middle one, like a bridge between the fingers, the third, like the eighth to the ringless one. Remove the middle loop on a pin. On the front side of the work. It is this loop that will lie on top of the three prefabricated loops of the back and inner sides of the palm and close the hole between the fingers. We will have 4 such "tricky loops". In between: Big-index, index-middle, middle-nameless, nameless-little finger. But so far we have only the beginning of the little finger. Remove all loops except the little finger for an extra knitting needle or large pin. Starting from here we knit only the little finger.

We knit upwards as much as the size of the little finger, round the finger and knit in the opposite direction. I point out on my thumb:

Making decreases

Then we make increments

We start knitting in the opposite direction, knitting an edge loop along with the underlying edge loop.

Similarly, so in the MK for mittens.

As a result, having untied all 4 fingers except the large one, we have:

We begin to close the holes between the fingers. from the side of the little finger, collect all the loops on the knitting needle, leaving the loops between the fingers on the pins FOR work. We knit 7 stitches of the index finger with the purl and the eighth loop of the index finger, knit the loop from the pin between the index and middle and the first loop of the middle finger together with the purl so that the loop from the pin (the middle of the three) is on top of the other two. Thus, the hole will close.

There are only a few threads left from it. I decided to try to create knitted gloves with knitting needles for children. It turned out that knitting gloves is not so difficult, and children's gloves generally knit quite quickly.

Dimensions: glove length 22 cm, palm width 6 cm (in brackets for palm width 7.5 cm.)

Materials:

Alize Cashmira batik yarn (100% wool, 300 m / 100 gr.) 40-50 gr., 3.5 mm stocking needles, 3 pins for knitting (or additional knitting needles, or waste thread).

Knitting density:

24 loops and 32 rows = 10x10 cm in stitch on 3.5 mm needles

Work description:

Left glove.

Knit in a circle.

On the needles 3.5 mm, cast on 30 loops (38 loops) and knit with an elastic band 2 * 2 to a height of 6 cm - cuff

Go to knit stitch and start adding to the wedge of the thumb.

Perform additions of 1 st on both sides of the last loop of the circle using yarns, in the next circle knit these yarns with front crossed loops.

add thumb wedges

Repeat the circle of additions in each 2nd round 3 (4) more times = 38 (48) sts. Continue knitting without adding.

After 11.5 cm from the typesetting edge, transfer 9 (11) thumb loops to a waste thread or knitting pin and instead cast on 1 new loop = 30 (38) loops.

transfer the loops of the thumb to the pin, instead of them knit one loop

Through 13 cm in the next. circle move the first 14 (17) sts of the circle by 1 extra. knitting needle (upper part of the glove), knit a trace. 7 (9) p. And transfer the remaining 9 (12) p. To the second add. knitting needle (lower part of the glove).

Little finger.

Knit 7 (9) sts + cast on 2 (1) new loop from ring finger.
Knit with front stitch.
After 4 cm (the height of the little finger), knit 2 stitches together. on all loops and fasten the remaining 5 sts on the needles.

Palm.

Transfer the deferred loops to the knitting needles and pick up 2 more new loops at the little finger = 25 (31) loops.

Knit 2 circles.

Ring finger.

Knit on 9 (11) sts + cast on 2 (1) new loop from the side of the middle finger = 11 (12) sts.

Knit 5 cm (ring finger height) in a circle with the front satin stitch and then in the next. circle - 2 sts together. on all hinges.

Fasten the remaining 6 sts on the needles.

Middle finger.

Move 4 (5) sts from top + 3 (4) sts from bottom + lift 2 more sts from ring finger + cast on 2 (1) new loop from index finger = 11 (12) sts.

transfer 3 loops from the bottom, 4 loops from the top, lift 2 loops from the ring finger

Knit with the front stitch in a circle and after 5.5 cm (the height of the middle finger) finish knitting as for the rest of the fingers.

Forefinger.

Move the remaining 9 (11) p. + Lift 3 (2) p. From the side of the middle finger = 12 (13) p.

Knit in a circle according to the pattern and after 5 cm (the height of the index finger) finish knitting.

Thumb.

Move the deferred 9 (11) sts to the needles + lift another 4 (3) sts along the edge of the thumb = 13 (14) sts.

Knit with front stitch 4.5cm (thumb height), finish knitting.

Right glove.

Knit the right glove symmetrically to the left, i.e. knit the cuff, go to knitting with the front satin stitch, making additions for the thumb.

Perform thumb additions on both sides of the 1st loop of the circle.

After that, knit the little finger trail. way:
transfer the first 9 (12) p. to add. knitting needles (lower part) + trace. 7 (9) p. To knit, last. 14 (17) p. Postpone for additional. knitting needle (top).

Knitted gloves for children are ready. You can get ready for a walk!