Incidents 

Which mink is better Scandinavian or Canadian, how to choose the right fur? Rules for choosing a mink coat

According to experts, it is better to choose a mink coat that meets all quality criteria. Also, an important role is played by the psychological aspect, how much it suits you and how well you feel in it.

When choosing a mink coat, you need to pay attention to a number of details.

What does the fur of a fur coat itself look like? If the fur is of high quality, then it flows, shines and shimmers in the sun. The color itself should be saturated, even. If the fur looks faded, then the fur coat was probably made by a handicraft method and the storage rules were not followed.

How firm and elastic the fibers of the fur are. If it is of high quality, then squeezing them in hand, they should quickly straighten up and return to their original position. The same goes for stroking the fur with your hand. The pile should not be crumpled.

  • There should be no lint of fur on the hand after stroking
  • There should be no dents, depressions
  • Fur pile should not stick together

If the coat is dyed, then check the color fastness. The color of the paint itself must be uniform in color. If possible, take a damp cloth and run it over the fur coat. There should be no paint on the napkin.

Often unscrupulous manufacturers of fur coats can hide defects under the lining, so it is advisable to check how the skin itself looks under the lining, whether there are any defects in it.

It should be borne in mind that the price of a fur coat is influenced not only by how well it is made, but also by its color itself.

  1. Light brown and dark mink coats are considered the most affordable and are very popular in stores.
  2. Dyed coats are sold at an average price. They look beautiful and attractive, creating an exquisite image of the owner.
  3. Beige and smoky fur coats are significantly higher in price. Fly pile comes in many shades.
  4. White mink coats are considered the most expensive. In appearance, they look beautiful, but not available to everyone.
  5. Black, natural color coats are considered the most expensive and exclusive.

To decide which mink coat is better, you need to take your time with the purchase, especially if you overcome the emotions of delight. It is believed that it is best to start walking in it for 5 minutes. Listen to your feelings.

Must not be

  • Discomfort
  • Seam friction
  • Feeling the heaviness of the fur
  • Stretching the seams

It is advisable to visit a couple more stores and also try on other models. Ignore the enthusiastic exclamations of the seller. The main thing for him is to sell, the main thing for you is to choose the very best mink coat. The seller's delight may be, regardless of the quality of the product and how much it suits you, he is more attracted by the potential that the product will be bought.

An important nuance is that you should like the fur coat itself, evoke pleasant sensations, feelings. When choosing, do not forget that the mink coat is in good harmony with your image and other clothes.

For example, if you wear mostly trousers or jeans, then more short fur coats will suit you. A long mink coat looks bad in combination with trousers. Dresses and skirts are better suited to her.

Also, it must fit the face and appearance.

What are the best mink coats

In the center of fashion, three countries are generally recognized, where the best mink coats are produced.

  • Italy
  • Greece
  • Russia

The better the fur coat, the more expensive it is. Although in some cases the popularity of the brand still affects the price. And less well-known firms can offer goods that are not worse in quality.

The cheapest mink coats

  • Chinese
  • Turkish
  • Thai

But in terms of quality, they are not always the best.

What color is the best mink coat to buy

It is believed that the light colors of mink coats make the appearance look younger. Dark colors add more seriousness and severity. The owner of a dark fur coat looks a little older. But on the other hand, dark coats go well with light hair. And for those who have dark hair, light coats will add youth. Therefore, you need to build on individual desires and how well the coat color suits you.

  • It is not recommended for bright blondes to choose black fur coats, as the image may turn out to be a little vulgar.
  • Brown mink coats are well suited for brunettes. Swarthy girls with dark skin should choose light coats.
  • Red-haired girls are not recommended to choose too light fur coats. They are more suited to golden, copper, caramel, cognac color.
  • Purple, yellow, red coats are not suitable for everyone, but on the other hand, they allow you to stand out brighter.

Therefore, in order to understand what color a mink coat to buy, you need to navigate based on your own preferences. It is also advisable not to buy a fur coat that is identical in hair color. Otherwise, its color will merge with the color of your hair and the hairstyle will be expressionless.

But you should also not choose the color of the fur coat, if it is very different from the color of your hair, such a contrast can look very ugly.

Which mink coat is better transverse or solid

Many women are interested in the question of which mink coat is better transverse or longitudinal.

Longitudinal, they are also made from solid, longitudinal skins. Usually classic models of fur coats are sewn from them. Such fur coats consist of whole skins that have not been subjected to additional processing.

Transverse mink coats appeared relatively recently, they look quite stylish and look good on a tall and slender girl. They are sewn from different plates, which can be both symmetrical and asymmetrical. The direction of the pile is not taken into account when sewing.

The main advantages of the cross-bar of a mink coat

  • Strength
  • Durability
  • Warm well in winter
  • Suitable regardless of height and shape of the figure

Solid mink coats often look better and prettier, fluffy, but at a higher price.

Buying a high-quality mink coat is not an easy task, even for those women who have already successfully coped with it several times.

Where and how to choose the right mink coat when buying? What are the distinguishing features of mink fur?

How to distinguish a natural product from a fake? You need to know exactly the correct answers to these questions so that you do not run into a poor-quality fur coat when buying. Let's try to figure them out.

Where and how to choose a good mink coat

Mink fur is a very valuable material. Fur coats made from it are in great demand and are expensive, so unscrupulous manufacturers often try to save money on their sewing or even fake fur.

To make a good purchase, you need to know where you are less likely to meet a fake:

  • Large fur salons... Here you can be sure of the quality of the fur coat, popular retail chains of this profile value their reputation and will not allow a fur coat of obviously poor quality to be sold. Prices for products in such stores are high, but you should not save on this issue. In addition, the salon will definitely give a long-term purchase guarantee.
  • Fur factory shop... In this case, the quality of the product directly depends on the reputation of the factory. If you or your friends have already bought fur coats from this manufacturer and are satisfied, then you can safely repeat this positive experience. Prices in such stores will be significantly lower, and responsible manufacturers will definitely give a guarantee.
  • Abroad... Recently, buying a fur coat on a tourist trip is quite a popular phenomenon. A good mink can be bought in Europe, Latin America and China. Yes, it is in China. Despite the stereotypes, the quality of fur products in the domestic market of this Asian country is quite high.

Tip of the day:
In no case should you buy a fur coat in small, little-known stores, unless you are 100% sure of the reputation of the outlet.
It's not even worth talking about fur traders in the markets: the chance to buy high-quality natural mink there tends to zero.

How to distinguish a fake

Furs of less valuable animal breeds are often passed off as minks.

It would seem that this is not so bad, the fur is still natural. This is not entirely true.

First, you overpay for cheap material, like for natural mink, the price differs significantly. Secondly, a mink coat is frost-resistant and moisture-proof; you will not get these qualities in less valuable furs.

Don't skimp on quality!

So how do you choose a quality mink coat? You can avoid deception, it is enough to know some features of the cut and the distinctive properties of different types of fur:

  1. It is hardly possible to find beavers or honorics forged under mink, the price of these breeds is even higher than that of mink.
  2. Nutria can pass for a mink, but in this case the fur coat will be sewn from square parts.
  3. The muskrat fur is cut in hexagonal pieces.
  4. Tarbagan, a Mongolian marmot, is most often passed off as a mink. In this case, the special structure of the marmot fur will help to distinguish a fake - its upper hair of uneven length.
  5. The rabbit is softer and more fluffy in comparison with the mink.

As soon as the sellers do not name fur, they are trying to sell low-quality goods: wild mink, Mongolian, and even steppe. Do not fall for persuasion, there is no steppe mink. A quality product does not need advertising or justification in a name.

Before purchasing a mink coat, do not hesitate to study it carefully.

Examine the product, try it by touch.

Knowledge of some of the properties of fur will allow you to correctly assess the quality and value for money:

  1. Natural mink fur is soft and shiny, the more gloss, the higher the quality.
  2. The undercoat is dense and dense. Look inside the fur, natural mink has a special down that covers the entire surface of the skin.
  3. Run your palm over the pile. Mink fur has excellent elasticity, so it instantly returns to its original position.
  4. A good mink coat, despite its bulk, should be light.
  5. Pinch the lint gently. If, even with a little effort, you still have villi in your hands, then you should not take such a product, by the end of the season the fur coat will lose its appearance.
  6. Look under the lining. A good manufacturer leaves it not sewn on the bottom so that the buyer can appreciate the quality. The seams should be neat and even, and fluff should not fall into them. The natural color of the mink skin is light and uniform.
  7. If the fur is dyed, check the quality of the tone. To do this, it is enough to run a damp cloth over the fur. If traces of paint remain on it, then the purchase should be abandoned.
  8. Mink fur has a uniform length, but you should not pay special attention to this property, since the pile can be cut.

After completing all these manipulations, you can accurately determine the authenticity of the material used. But do not forget that even a real mink can be of poor quality.

On a note!
The everlasting trend is trapezoidal patterns made from diagonal pieces of fur.
This method of manufacturing initially implies a more accurate wear and gentle cleaning.
By the way, it will not be hot in such clothes, and it completely fulfills its decorative function.

Quality assessment of mink fur

If you have established that mink fur was really used for sewing your chosen fur coat, you still should not rush to buy.

Even the quality of fur coats from the same breed of animals can vary significantly.

In many ways, it depends on the dressing of the skins, on the period of slaughter of animals, and even on the sex of the individuals.

Take a close look at the inside of the fur coat. If on the reverse side the skin is white, then the dressing was carried out in accordance with all accepted standards. A yellowish tint indicates irregularities in the processing of the skin.

An important role is played by the geography of the origin of the mink. Before buying a fur coat, be sure to ask the seller where it comes from:

  • Russia... The fur of Russian breeds is warm and dense. Subject to the production technology, a fur coat made of it will have excellent quality. The only minus of the domestic breed is some "shaggy" of the pile.
  • Scandinavia... Fur coats from Scandinavian mink species have proven themselves quite well in the fur market. Feel free to buy goods from Greece, France, Italy. People from these countries are perfect for the Russian winter, they are warm and do not get wet.
  • America... American mink breeds have beautiful fur, but fur coats from the USA and Canada are not frost-resistant. Products from these countries are suitable for wearing in late autumn or cold winter.

The gender of the individuals whose skins are used for sewing also matters. The fur of the males is heavier, the pile is longer, and is particularly durable. Its downside is that it is heavier. As a rule, male mink fur is used for making short models.

The fur of the females is softer and lighter.

More voluminous and long coats are made from the fur of females, it is softer and lighter. This measure allows you to sew a large product with little weight.

The skins of the animals taken during molting are of poor quality. The sheen characteristic of mink fur is absent, the pile falls out. To notice this, you just need to shake the fur coat, if the hairs fell, then the fur is of poor quality. Also, after trying on, lint may remain on the collar and cuffs of your clothes.

How to choose the right model

A fur coat is not just a piece of outerwear in your wardrobe. This is an element of the image of a woman, which is designed to show status and wealth.

But just buying the first fur coat that comes across is not enough, even if it is expensive and beautiful. It is important that it is right for you, emphasizing your strengths and hiding shortcomings.

Short models are suitable for miniature representatives of the fair sex. Classic long fur coats in this case will look out of place. For women with voluminous shapes, the trapezoidal cut is perfect.

For ladies who usually travel by car, models with a short sleeve are perfect. Today it is the most fashionable style.

When buying a mink coat, the main thing is not to rush. Approach this issue with all possible attention. Study thoroughly the list of fur shops in your city.

When you stop your choice on one of them, even if it is the most famous and has a lot of positive reviews, carefully study the quality of the model you like.

Do not hesitate to ask the seller for a certificate of quality, ask to rip off the seam on the lining. If the store is confident in its product, not a single request will be refused.

Video "How to choose a good mink coat"

After watching the video, you will learn how to choose the right mink coat and at the same time benefit from the price and quality:

You can find additional information on this topic in the section.

1. Wherever you buy a mink coat - in your city or go shopping abroad, the most important thing is not to be too lazy to go around several well-known, trustworthy stores or factories. Examining the products and listening to the opinions of different specialists - sales consultants, you will learn how to determine the quality of a mink coat yourself. In addition, it will allow you to choose a suitable fur coat at the most favorable price. And also - get a lot of pleasure contemplating your image in the mirror in various variations of mink coats. Perhaps, in the process of trying on, your preferences for color and model will change, as you will realize that a completely different image suits your face than the one you imagined.

How to choose a mink coat and what you should pay attention to:

2. Look closely at the fur - it should be shiny, smooth, soft with a thick undercoat.

3. How to distinguish quality from fake? Run your hand over the garment against the direction of the mink hairs. If after this manipulation the hairs returned to their original place and the appearance of the fur coat area did not change, then the quality of the fur is good, if the hairs bristled after your action, then the fur is of poor quality.

4. Look at the flesh, this can be done by blowing on the surface of the fur. If the flesh is light, then the fur has not been dyed or toned. If the skin is dark, this may mean that either the fur was dyed, or the fur coat, so to speak, is not the first freshness - it was stored for a long time in inappropriate conditions. In this case, the fur coat will not last long.

5. Check the joints of the skins. From the outside, the seams should not stand out too much. Especially often poor-quality seams can be seen on the shoulder section, especially if a fur coat with a hood that covers these joints.

6. How to choose a new fur coat and distinguish it from the old one? Shake off the product, if hairs fly from it, then the fur coat is old.

7. The lining of the fur coat should be made of high quality, but not "flashy" material. Her patterns are precisely tailored to the size of the product. The manufacturer of good fur coats always focuses on the fur, not the lining.

8. The bottom of the lining should not be sewn to the hem so you can see the inside of the garment. Usually, if the seller is confident in the quality, he himself will offer you to check the fur coat from the inside. You can look at the color of the skin (light is good, dark is dyed). Check the seam stitching - it should be neat, there should be no mink hairs in the seam.

9. If you nevertheless realized that the fur coat is dyed, this is not the worst thing. Some manufacturers tint products, giving them more noble shades. In this case, the quality of the paint is important. It can be defined as follows - take a light-colored handkerchief, slightly moisten it and slide it over the product. If there are traces of paint on it, do not take this coat.

10. The hairs must be of the same length (excluding the undercoat). If some hairs are knocked out in length from the rest, most likely the mink was trimmed to give it a neater appearance. So initially the fur was not very high quality.

11. A little about the Black Lama. In a real Black Lama, the undercoat is different in color from the main hair color. It is dark brown in color, very dense. And the main hairs are black. Black Lama mink products look like plush. It is this fur that is considered the highest quality and most durable. If you ever see products from this type of mink, you will understand what the real quality of mink is and will be able to unambiguously define it in the future.

After reading our tips, you can easily answer the questions - how to choose a mink coat, how to determine the quality of a mink coat, and how to distinguish a quality fur coat from a fake. Look the same models of mink coats, perhaps one of them will become the subject of your desire.

In addition to their favorite mink coats, jewelry is the best friend of the girls, and

Instructions

Having decided to buy, contact specialized fur stores. The wider the choice, the more chances of finding fur coat that you dream of. If you are planning to pick up a model on the market or purchase a fur coat from a private seller, keep in mind that in the event of a defect found in the process of wearing, you will not be able to return the purchase.

Choose several models and try them on. The fur coat should sit well, not pull, not warp. If you are planning a fur coat with a jacket or thick knitwear, don't try it on a thin turtleneck. Pay particular attention to the fit at the shoulder and chest area. Do not console yourself that the fur coat will "shrink" over time. If you feel uncomfortable, look for another model.

Shake your fur coat. Small villi should not be separated from it, it should not rattle or rustle. Correctly processed fur does not emit harsh odors, its hairs adhere tightly to the flesh, do not break off or puff up. Run your palm over the fur - it should be smooth, uniform, with the pile lying in one direction.

If the coat is dyed, rub the fur with a clean handkerchief. Noticing a trace on the fabric, refuse to buy - low-quality dyes are not so rare. Such a fur coat can deteriorate after the first snowfall.

Look under the hem of your fur coat. Long models are usually not sewn up so that buyers can personally see the quality of the fur processing. The sewn lining is a reason to be on your guard. Perhaps the manufacturer or seller has something to hide. Feel the mezra - it shouldn't be wet or hard. Well-dressed flesh is dry, smooth and silky to the touch.

Examine the seams. Make sure that the fur coat is sewn neatly, without distortions and unstitched areas. The lining fabric should be quite dense - if the manufacturer has saved on quality, after a month the socks on the shoulders and in the armhole may come apart, and it will be problematic to sew them up. Check for hooks. If you don't have one or two, ask for a discount on your fur coat. This also applies to other minor defects - for example, tightening on the lining.

Sources:

  • mink fur

Weariness is the main quality of any fur product. Mink is a unique fur. Not only is it very wearable, the mink is also unusually beautiful and graceful. A high-quality coat made of this fur will delight and warm you for ten or even more seasons. However, buying mink, one should be careful not to buy a fake. How to distinguish the real mink?

Instructions

Buy fur products only in a salon or store. With modern methods of processing fur, only there, in the fitting room, you can carefully examine and touch the fur coat, evaluate the quality of processing of fur and seams, check the color fastness.

Evaluate the plasticity of the fur. Mink fur is elastic and immediately returns to its shape. If the fur is not plastic, hard and bulges, then instead of mink, they are trying to sell you a product made of tarbagan - Mongolian marmot. It is quite possible to run into such a fake when buying a “Made in China” fur coat.

In addition to fakes made of cheap fur, there is a danger of buying mink lower than stated quality. Examine the flesh - the back of the skin. For dear mink with a purple or blue tint, can produce cheaper dyed fur. If the fur was not repainted, then the skin will be light.

It is not easy to choose a natural fur coat. A customer needs to take into account a lot of nuances: to be able to correctly assess the fur, to distinguish a mink from a rabbit, and a beaver from nutria, to know good producers. With this approach, a fur new thing will not only become a luxurious decoration, but will also last for more than one year.

The choice of a fur coat depends, first of all, on the woman's preferences. An important role in this responsible business is played by such criteria as the type of figure, lifestyle, current trends in fashion, taking into account the opinion of experts. As for the latter, they recommend paying attention to the following points:

Color

  • "Lady-autumn" and "girl-spring" are in harmony with warm tones: pinkish, orange, pistachio, beige;
  • "Woman-winter" and "young lady-summer" look organically in fur coats of cold shades: gray, greenish, blue, chocolate, metallic.
  • classic colors - white and black - suit almost everyone.

Do not forget about the modeling function of color. A plump woman will look slimmer in a dark brown or black fur coat. And it is better for skinny girls to prefer lighter outerwear.

The size

The most important guideline when choosing a fur coat is its compliance with the parameters of the figure. The main thing is that the product is not heavy. Classic models are characterized by a loose fit. A fur coat fitting a voluminous figure is a deliberately erroneous decision. Such an outfit loses its most important "plus" - elegance.

A product that will fit will give one hundred percent comfort. You don't want to pull it back or move it forward, pull back the collar that squeezes the neck or roll up long, like Pierrot's, sleeves. Having tried on such a fur coat, it will be difficult to part with it.

Style

Stylish cut of a fur product, taking into account the specific proportions of the body, height and physique - is this not the dream of every customer? To make it come true, you need to keep in mind the following nuances:

  • a woman with a petite build will simply "drown" in a long-flared fur coat;
  • such elements as a peplum at the hem and a massive collar will help to correct the silhouette of an orange type - without signs of a waist;
  • a fur coat to the middle of the thigh, widened to the bottom, with an emphasis on the waist line, will emphasize the dignity of a slender figure;
  • owners of a lush bust and wide hips should look for a shortened trapezoidal outerwear;
  • tall and thin ladies will go with fluffy sable or arctic fox fur, as well as mink cross sections - fur coats made from skins located not along, but across.

Knowing these little secrets will be of great benefit to women who want to harmonize their silhouette and keep up with fashion.

Keeping warm

The fur of a bear or a reindeer will warm best of all, but products made from these materials are not common in our country. Skins of sable, arctic fox, raccoon dog, beaver are considered very warm. They are distinguished by the largest number of guard hairs and the thickest down. True, they are all pretty heavy.

Less heat-resistant are astrakhan fur, mink, ermine, chinchilla. There is little hope of not freezing in severe frost left by products from a goat, a rabbit, a marmot. And the fur of a gopher and a hamster practically does not warm.

Appointment

Fashion trends in recent years dictate the choice of fur products, taking into account the purpose of the acquisition. In this regard, fur coats can be divided into two categories:

  • for every day, including work, - light, practical mink, astrakhan, hare coats in tandem with jeans or trousers;
  • for special occasions - fox, lynx or sable fur products combined with a smart dress or spectacular costume.

Life time

To find out how many seasons a new fur coat will last, you need to take into account the following gradation (the numbers in it indicate the number of seasons that the skins of the listed animals can withstand):

  • 20 - river beaver and otter;
  • 10 - mink;
  • 7 - marten, blue fox, astrakhan fur;
  • 5 - fox, nutria;
  • 4 - squirrel;
  • 2 - hare, rabbit.

Choosing a quality fur coat by type of fur: basic nuances

First, let's outline the general features of real fur. Unlike a cheap fake, it is soft and obedient, does not paint your hands, does not crumble, does not have a specific smell and, of course, pleases the eye.

Now let's talk about the nuances of choosing the right natural fur coat from different types of real fur:

  • mink: The hairline is soft, but tougher than that of a rabbit; shimmers and flows; elastic, obedient when stroking "against the grain", fibers even along the length do not stick together. The price of mink skins depends on the color: nut, dark brown, red are less valuable, and brown with a beige undercoat, white, black with a purple tint are considered the most valuable;
  • marten: soft, fluffy, silky fur with long hairs of uniform density, without bald spots. The hand literally drowns in it. The color scheme is represented by rich shades of brown. The underfloor is one tone darker than the general color; Marten fur coat
  • from river beaver: heavy fluffy fur with a thick undercoat; natural colors - from chestnut to dark brown; it differs from the cheaper nutria, which is often passed off as beaver fur, in a greater degree of fluffiness;
  • from muton: Sheepskin treated and dyed in different colors has absolutely straight hairs, cut to 1.27 cm (shorter length is evidence of poor quality). The pile is smooth and soft like velvet. Has a natural shine; Mouton fur coat
  • from karakul: Very thick, shiny, tightly set, curls of medium length with a crisp pattern. The most common color is black, less often gray, golden, white; Karakul fur coat
  • sable: the hairline of this fashion material has no equal in density, splendor and silkiness. The hairs reach 4 cm in length. The vertical spine completely covers the down. The palette of colors - from sandy to brown, sometimes with "gray"; Sable fur coat
  • rabbit: the fur is short, thick and delicate, reminiscent of plush; all hairs are of the same length; rich variability of color: black with a blue tint, reddish brown, silver, gray-white;
    Rabbit fur coat
  • fox: hair is long and thick, a great variety of colors: from classic fiery red to white with a gray undercoat; the hair of a particularly valuable silver fox plays and shimmers in three tones: smoky gray (at the base), white (in the middle) and black (at the tip);
  • raccoon: voluminous silky long-haired fur with a soft high awn and the same undercoat; typical colors: brown-beige, milky gray; the fewer yellow shades in the tone, the higher it is appreciated. Raccoon fur coat

How to choose a fur coat in a store?

A natural fur coat made of mink or fox, rabbit or astrakhan fur is an expensive pleasure. The right choice of a good product, picky about every nuance of it will allow you to enjoy the purchase for more than one year.


Tips from professionals
  1. Assess how thick the fur is. Its insufficient density can mean one of three things: either the skins were processed in violation of the processing technology, or they were too stretched, or the animals were slaughtered in the summer, during molting. In all these cases, buying would be unwise.
  2. Iron the fur in different directions. Natural hairs will not bend or break; under them you will find thick fluff.
  3. Soft skins of animals, in contrast to artificial substitutes, are not afraid of any manipulations: they can be crumpled, squeezed, pulled - they will again acquire their former "marketable" appearance.
  4. Make sure that the product is not dyed: part the hairs and check the color of the skin - it should be white. To test the quality of a painted fur coat, run a damp cloth over it - good paint should not leave marks.
  5. Shake the fur. If at the same time you do not hear any sound and do not notice the intense shedding of the villi, everything is normal. If the fur coat, like an oilcloth, "thunders", a lot of hairs will fly from it, it means that the fur was dry. Such a product will soon lose its shape.
  6. Check what holds the fur pieces together. Unscrupulous manufacturers do not produce stitched, but glued fur coats. Such a product will not bring anything but grief.
  7. Pay attention to the lining. If it is tightly sewn on, this is already a "minus" to the product. Reputable manufacturers do not do this, giving the buyer the opportunity to be convinced of the usefulness of the skinning.
  8. Examine the underside of the product. The inner side of the skin - the flesh - should be distinguished by an even matte light color. If it turns yellow, it means that the fur is already second-hand and fragile. The skin should be firm, soft and smooth to the touch.
  9. Make sure you get a one-cut piece made from 15 cm pieces. This is a benchmark tailoring. An alternative to it is a fur coat made of pieces, connected with the help of a special computer program. Such technology, although expensive, will not provide either durability or charm to the product.
  10. Take the time to research the tags. Keep in mind that the most expensive and warmest fur coats are labeled with the following labels: Platinum / SagaRoyal, NAFA / AmericanLegend.

After examining, feeling, shaking the fur coat, you must definitely put it on. It is recommended not just to glance at yourself in the mirror, but to “live” in a new thing for about five minutes. If during this time she becomes native - we must take it!