Youth and beauty 

Beautiful Christmas wreaths. Christmas wreath on the door or how to make Christmas wreaths

- a beautiful Catholic tradition and a wonderful craft for the New Year, which is taking root more and more with us. Why not: there is never a lot of New Year's mood. Do you know why exactly a wreath, and what does it symbolize?

Usually, Christmas wreaths are woven from pine needles or holly - an evergreen shrub with red berries and jagged thorny leaves. These plants were also used in the pre-Christian period. Evergreen leaves in winter promised the return of the sun, and sharp needles at the tips scared away sorcerers and evil spirits. Christianity brought its own content to the evergreen wreaths: the thorny branches reminded of the crown of thorns that Christ carried in the last hours of his life, and the red berries were drops of his blood.

However, despite the sad associations added by the church, ordinary people are happy to decorate their homes with wreaths. And they are not limited to the traditional motives of the Christmas tree and holly. We have collected 15 of the most elegant and original wreaths for.

The wreath that imitates Santa's beard will definitely please the old wizard. To make such a decoration, wide strips of tulle are folded in half, and fixed in the form of loops on a metal or plastic rim. Half of the wreath, free from the beard, is decorated with a Santa hat.

Faux fur and a few cardboard houses create a true winter fairytale. You can wrap the boa base with white down.

Another hint of Santa's costume. A wreath of scarlet Christmas tree balls, fixed to the base with a glue gun. And on top of it is a traditional black belt.

Classic red berries and poinsettia flowers are located not on a coniferous wreath, but on a circle trimmed with decorative sacking. To create fluffy folds, thread 3-5 strong threads along the entire length of the fabric, and gather the fabric on them.

This wreath is made without any additional base. Pieces of wood were simply glued together and decorated with a decorative bow with cones and cypress twigs.

Wrap the foam base tightly with thread, decorate with a cheerful snowman and roses from cotton pads. To make roses, cut each disk in a spiral, and roll the resulting ribbon in the form of a dense bud.

This wreath, strictly speaking, is not even a wreath. A frame of four sawn twigs was decorated with twigs of various conifers. It turned out very elegantly.

Christmas tree tinsel and toys will also create a festive atmosphere. Before entangling the base with tinsel, it is worth blowing it out with silver paint from a spray can.

A cozy wreath made from balls of wool and twine. Surely a needlewoman lives in this house.

The tips of the cones were slightly dipped in white, and tightly pasted over the foam base with them. An inconspicuous garland was stretched between the cones. In this magnificent wreath, wires are not visible, only merry lights are visible.

And this wreath is for those who have not yet finished celebrating Halloween. And the snowman on it looks more like a skeleton, and the coloring is gloomy: the wreath is made of wide black and white laces.

The most fragrant Christmas wreath. The foam base is pasted over with spices and decorated with a traditional dark green ribbon.

The wreath does not have to be hung on the door; it can also decorate the house as a panel, like this elegant wreath made of scarlet felt poinsets.

Such wreaths will definitely not allow old Santa to forget why he came to your house. Sweets and gifts are one of the main elements of Christmas.

  1. A bit of history
  2. What do we need
  3. Subsequence
  4. Stage 1: preparing the base
  5. Stage 2: fixing the branches
  6. Stage 3: decoration
  7. More ideas

Christmas and New Year's wreaths, along with a decorated Christmas tree, are symbols of the upcoming holidays. The custom to create such compositions came to us from Europe, today in our country such decoration does not surprise at all, but, on the contrary, disposes to the New Year mood. How to make a New Year's wreath with your own hands - we will tell you in a detailed master class with beautiful photos of the process, throw in a few ideas and give practical recommendations.

A bit of history

Christmas wreaths originate in Hamburg in the Middle Ages of the last millennium. The Lutheran theologian Johann Hinrich Wiecher, who took up several children from very poor families, came up with a kind of "waiting calendar" for Christmas. It was an old wheel, which the priest decorated with coniferous branches, and put candles to it: 19 small red ones and 4 white ones. Their number showed which day before the holiday is now and how much is left. Every day Johann and his children lit one red candle, and on Sundays - one white. This way the guys could easily endure the anticipation of the holiday.

Today, a wreath of coniferous branches in Russia is associated only with the New Year, the symbol of Christmas is still characteristic of the Catholic Church.

Wreath symbolism:

  • The circle with candles is associated with the Earth and the four cardinal points.
  • The circle itself is the infinity of life.
  • The green color of evergreen needles is a symbol of all living things.

Candles in Christmas wreaths fill the house with light, much like the world is illuminated at Christmas time.

You can buy a traditional New Year's wreath made of cones and branches in the store, but will it be so symbolic and attractive? Oddly enough, such a souvenir rarely has a pre-holiday magic, such are purchased for offices and places far from home. Even in an age of high pace of life, most people find a couple of hours to make a Christmas wreath with their own hands. It is not difficult at all, it is fascinating and it means that such decoration is much more than just a symbol.

Wreaths of cones and needles are traditionally placed on:

  • At the front door;
  • Over fireplaces;
  • On the table as a table decoration.

Accordingly, the design and method of attaching toys, jewelry and accessories will differ.

To clearly show that making a Christmas wreath with your own hands is not difficult at all, the designers made a fascinating master class with a photo so that everyone could try to create their own New Year's decoration, while enjoying the process and the result. So, the New Year's wreath: mk with step-by-step instructions.

Master class from creative designers

How many variations of decor come up with bright heads of designers, and the basis always remains traditional - green branches of conifers. You can decorate a spruce wreath with anything:

  • Christmas balls;
  • Tinsel;
  • Cones;
  • Felt toys;
  • Beads;
  • Feathers;
  • Beads and so on, just not to list.

Our artists came up with a few ideas:

  1. Christmas wreath of cones and oranges;
  2. A wreath with cotton cobs, feathers and New Year's toys;
  3. And there are many more interesting combinations that you will see below.

What do we need

So, what we needed to create Christmas and New Year's wreaths:

  • Spruce, pine, fir branches. They can be collected in a forest belt or in a park. Choose beautiful young branches with good uniform needles, it should withstand a month and a half in excellent condition. Of course, you can use artificial needles, but the effect will not be the same, and there will be no smell from this, and this is an almost obligatory wish;
  • Spruce cones. You can take cedar, pine, or whatever you like. Try to choose fresh ones - old ones quickly crumble in a dry and warm room;
  • Multi-colored Christmas balls. Take those that you do not plan to hang on the tree, so you can also save money. Choose small toys to be placed on the branches themselves; you can take a larger ball for suspension;

  • Colored bird feathers are sold in decorative and hand-made stores, we have taken several varieties;

  • Satin ribbons for bows;
  • Rowan twigs with berries are an unusual solution, but organically fit into the theme of a real winter tree.

Do not be afraid to use food for work - gingerbread, candy, fruits. The main thing is not to take perishable ones and keep track of their expiration date.

  • The highlight of the program is orange rings. They will add brightness and scent to the finished jewelry. The smell of citrus and pine needles in the aggregate is associated with any person with the winter holidays.
  • Tools: scissors, pruning shears, ropes, hot glue with a gun.

  • The basis for the New Year's wreath is a cut out circle made of thick cardboard. You can use newspapers, a hoop, a piece of a wide pipe - any round product.

Subsequence

Now we will tell you how to make a wreath on the door with your own hands in stages, because one of the components of successful work is the correct organization of the work process.

Stage 1: preparing the base

This is the most crucial step, on the implementation of which the quality of the finished wreath and its strength depend. We took thick cardboard, cut out round blanks from it with a diameter of 30 cm from the outside and 25 cm from the inside. The width of the wheel turned out to be 5 cm. We wrapped the workpiece with a wide ribbon of gold color - this solution will allow you to conveniently attach the branches and decor, and random gaps through the needles will not be striking as something unfinished.

Instead of cardboard, a wreath of newspaper tubes at the base also holds its shape well. Creative minds even manage to create an independent composition by twisting the sheets of the old press into cones and tubes, securing them to the base. But this is not our case.

Stage 2: fixing the branches

It's easy to attach twigs on your own:

  1. Insert them into the tape pockets at the base of the workpiece and tie them with a thread;

  1. Interlace with other twigs;
  2. Staple brackets or wire are suitable for fastening.

Prepare the branches in advance: cut off excess shoots and shorten the main one to the desired length. Work through the entire perimeter of the ring.

Let some branches be with their own cones, this will facilitate the decorating process.

Stage 3: decoration

This stage is the most creative and interesting. Here we turn on all our imagination and create.

We used cotton cobs for decoration - the natural theme is always relevant, and such an unusual solution will definitely transform a hand-made wreath.

Imagine the look of your product in advance and choose matching items for decor. Let them be unexpected, then there should not be many of them.

Until the branches are covered with decor, reinforce them with a thin thread: it will pull the greenery to the base and visually decorate the product.

If your hand reaches for rowan branches - do not deny yourself... Fortunately, they can be collected before deep frosts.

Cut the harvested branches with pruning shears to the desired length, remove the ugly and spoiled berries. Insert the branches into the pockets of the workpiece and tie them up like spruce.

Now we attach delicious material - orange slices. It is better to fix them to the composition using ordinary threads - the staples will tear the delicate structure, and the glue simply will not grab with the liquid juice. A fragrant reminder for the new year and a simultaneous memory of a sunny summer.

The feathers are best fixed with hot glue. Why hot? - it instantly grasps and you don't have to wait long for drying. In addition, it is colorless and will not make itself felt.

Decorating a wreath with your own hands with Christmas balls is as exciting as decorating a Christmas tree. We placed small balls in the same scale on the branches. It is better to fasten them with threads using a crochet hook through the branches.

Well, what about without various trinkets and toys?

A Christmas wreath on the door may contain a reminder of winter and snow. For this we use "liquid snow" in the form of an aerosol. With its help, we apply frost to the tips of the needles.

Making a New Year's wreath cannot be put into one framework - there are as many solutions as there are hands to make this symbolic accessory.

One of the examples of what we got.

More ideas

It is not at all necessary to make a Christmas and New Year's wreath from living branches, you can make a composition from any materials for needlework:

  • Felt wreath;

  • Beaded wreath;

  • Paper wreath;

  • New Year's wreath from tinsel.

The choice of material is limited only by the scope of imagination.

The video reflects the process of work, which is very easy to repeat.

Make DIY Christmas wreath- this is the same obligatory item of the pre-holiday program as buying gifts or preparing holiday salads. Such things as surely give everyone a suitable mood, because it is most often located at the front door, so every family member will certainly meet with him a couple of times a day. Today we will see not only popular and traditional master classes for such crafts, but also several original ideas that you might want to implement in your interiors.

How to make a Christmas wreath with your own hands

About the traditions of such decoration, as you can find out from books or on special resources dedicated to the European traditions of the holiday. And let some say that this is not entirely traditional decor for our region, because once in its time the Christmas tree was also brought as a tradition from abroad. But we can recall the sacred meaning of such an adornment that, weaving and closing the circle, we weave into it all the brightest and kindest feelings, desires and dreams that will certainly have to come true in the coming year. Therefore, even if you have not the most beautiful decor in the world, it is still worth making it, even if only as a talisman. We will show you some simple examples, how to make a Christmas wreath with your own hands.


Initially, exclusively natural materials were used for creation, and primarily the branches of conifers, since they are evergreen and could retain their attractive appearance for a long time. They were decorated with ribbons, bright red winter berries and poinsettia flowers blooming on the eve of the holiday. This gave rise to the traditional color combination for such a craft - red and green. But in conditions of cost savings, it is not forbidden to use more affordable and cheaper materials, for example, bright and shiny Christmas tree tinsel. Execution example do-it-yourself Christmas wreaths made of tinsel you see in the photo below.


Let's move on to a description that will help you in weaving. To save additional money on this material, we will not wrap several layers out of it, but nevertheless, the circle will turn out to be quite lush. This result is easy to achieve with a dense base coat. The first frame will be a wire ring, it should give the entire product the required shape, outline its future dimensions. On top of the wire, wrap patches of dense (preferably terry) fabric and fasten it to the frame with coarse threads. As a result, you should have an even and dense ring, as in photo # 3. Tinsel is screwed in one direction, for example, clockwise, and it will be better if you fix each turn with a heat gun.

When the entire surface of the ring is covered with a shiny layer, and the tinsel is securely held with glue, you can start decorating. Such ones always look beautiful when the shine of the rain is additionally set off by small balls, maybe even different in size and texture. But it doesn't matter if you don't want to use balls or are worried about the weight of your finished product. Then you can use ribbons and braid of different colors to decorate.


The basis for the other option will not be the wire, but a cardboard circle or even the rim of the embroidery hoop. Just fasten the beginning of the tinsel to the clip and start turning in tight rows. In order to decorate the starting point, you simply attach a large artificial flower to it with glue. Having disassembled the execution DIY Christmas wreath step by step, you were able to make sure that there is nothing complicated in such a craft. But to consolidate the result, we will demonstrate a couple more of the same simple ideas.

DIY Christmas wreath master class

So next on the topic of execution do-it-yourself Christmas wreath master class focuses on other material - cones. They are used in large quantities for festive decoration, so they cannot be called too original. The only limitation is that you should not hang such decor on the front door, which is located on the street, and not indoors, because birds can flock to the cones and simply ruin the whole decoration.


Ideally, for work, the cones need not only be dried, but also covered with paint, but it is still recommended to do this after collecting the entire craft as a whole, because even dried paint can stain your hands and clothes during work, and crumble from the surface of the cones. Therefore, we begin by forming a loop on each cone to fasten it to the structure. You can use special plastic mounts or make your own from wire.

The rudimentary piece of wire that can be found in every home is a cheap wire hanger, which often comes as a disposable piece of clothing. It needs to be given the shape of a circle and one end of it must be unwound from the other so that it separates and cones are tightly strung on it. If you use wire fasteners, and not plastic, then you can not separate the circle, but simply wind the wires around the base. Attaches buds from all sides, top and bottom, and side, so that they form a volumetric circle. When you reach the end, bend the protruding "nose" of the wire into a ring, it will come in handy for fixing the donut on the front door, and on top mask this fastening with a bow of satin ribbon.


The same base can be used for another variety. do-it-yourself New Year's wreaths. Master class, photo which you see above shows a decoration for a nursery or for adults who are eternal children at heart. We are talking about -2015), which is made using lollipops in bright wrappers. The only drawback of the craft is that it is unlikely to live longer than the school holidays. Each candy is attached to a wire circle (also in the recent past, a hanger) with electrical tape, and it will be easy to unwind it if necessary, and it can easily withstand the load of candy. To make the lollipops stick out more effectively in all directions, wrap only on the bottom bow, and not on the middle of the candy.

DIY Christmas wreaths from branches

Coniferous branches, as we have already said, are a traditional and still fashionable and popular material. But for those who crave originality, who want to get original decor, we offer a new trend in design - DIY Christmas wreaths from branches... Moreover, these branches will be absolutely "naked", that is, they will not have either needles or leaves, but you will see that even a modest one can look no less elegant than a traditional one, and already more refined and laconic - for sure.


The main secret is to learn how to beautifully intertwine flexible branches of vines and willows in order to get a picturesque combination of them. You can learn this in the detailed tutorials on creating DIY Christmas wreath, video with which there is also on our website. Once you figure out the base, decorating will be a fairly easy task. It can be either magnificent and solemn, or rather laconic. You can see an example of a grand-exit decor in the photo above. In this option, it is very important to create the right, truly winter mood and the appearance of snow-covered tree branches ideally contributes to this. For this effect, floristic twigs with artificial flowers, white, small in size are used. They need to be placed on the surface of the branches, but not too often so as not to overdo it. Brocade bows and shiny Christmas balls will also add to the festiveness.


But this option, although much more laconic, looks no worse than the previous one. But if there it was necessary to create the effect of "disheveled" branches, then for such work you will need to "comb" your branches as much as possible, because the main decor here is artificial cherries, ribbons and, of course, a bird made of fabric that sits inside, like in a picture frame.


Another example, this time it is a creative rustic creation that fits perfectly into a traditional rustic interior. Such a ring is made rather not from branches, but from the roots of a tree, but thin, young roots and processes are taken. They must not only be washed, but also well cleaned of the remains of the earth and, if you want to extend the life of the craft, covered with a colorless varnish that will protect the wood from decay. To simplify the manufacturing process, you can not intertwine the roots, but stick them on top of each other in tiers using hot glue. Be sure to hang a bright Christmas ball inside to emphasize the theme of the composition. By the way, it can change in the same way, because inside you can hang a heart, and a flower, and painted Easter eggs, and yellow autumn leaves.

DIY Christmas wreaths on the door

Materials for DIY Christmas wreaths on the door just do not count. But many do not want to use expensive raw materials, as they are afraid that someone can simply take such beauty for themselves. However, there are options for using fabric or even its cheapest variety - burlap. You can see examples of such use in the photo below.

As a decoration for the holiday, New Year's wreaths were made mainly by parishioners of the Catholic Church. But now, many people are trying to decorate their home with a wide variety of decorations.

New Year's wreaths on the door made of branches with cones are quite common today, and every year the number of such decorations only increases. Some craftsmen add their ideas to this decoration in the form of Christmas balls, figurines of fairy-tale characters, etc.

DIY Christmas wreath

An ordinary, traditional wreath is made from a round base, the material for which can be tightly woven wire. You can choose the diameter of the circle yourself based on the size of the door. Thin branches are woven into the wreath, then some ornament is made from the cones, for example, the four cardinal points.

IMPORTANT! It is advisable to choose the cones of a small size so that it is easy to work with them.

Photo 2 - One of the options for making a wreath of fir branches

How to make a wreath from branches without using special tools?

Photo 3 - One of the ideas for making a wreath of cones and acorns

Necessary materials

First of all, you need to decide on the material and base. The ideal option for a wreath of branches would be a wooden wheel rim. If it is not at hand, it will do quite well:

  • ordinary tight wire;
  • a piece of a rigid hose;
  • cardboard that can be glued in several layers.
Photo 4 - An example of a wreath of cones of nuts and acorns

Branches should be chosen flexible, more than half the length of the base. Use a thin dark wire or fishing line to attach them to the rim. Such a wreath looks great with decorations from:

  • berries;
  • fruit;
  • peppercorns of different shapes;
  • small garlands that can be selected according to the New Year's theme.
Photo 5 - Wreath with a decor of dried oranges

Step-by-step instruction

To make a paper wreath, we offer an original method with a step-by-step description. It will be based on a polyurethane foam rim, which must be allowed to dry for several hours.

A pre-selected material is attached to the base with glue:

  • cones;
  • dried flowers;
  • stars;
  • tangerine peels;
  • rosehip inflorescences.

Places without decor are wrapped in foil and painted with a brush or spray gun.

Attach a colored bead loop so you can hang the wreath on the door.

Christmas wreath of candies

Photo 9 - A wreath of poinsettia leaves

Children love sweets, and sometimes they want to deliver not only visual pleasure, but also taste. To implement this idea, you need a wreath of sweets. In its manufacture are used:

  • a small hoop made of paper, plastic or other rigid material;
  • sweets, preferably in a tight wrapper;
  • braid;
  • medium-width scotch tape.

You need to fix the candies so that they are easy to cut. When doing this, use braid in different colors.

New year pasta wreath

The use of semi-finished food gives a special originality to many products, so the pasta wreath will look very unusual from any angle.

A rigid cardboard blank is suitable for the base, which is glued on both sides with adhesive plaster. Then pasta of various shapes is glued to the workpiece with ordinary PVC glue. It is best to use curls and seashells. They look great after being painted.

It is best to paint in a golden color. Once dry, wrap the wreath with shiny ribbons so you don't hide the contents too much.

The video shows in detail how to build such a wreath.

New Year beaded wreath

Photo 16 - An example of a wreath of tinsel and Christmas tree decorations Photo 17 - The idea of ​​a wreath of branches and balls

To make a wreath of beads you will need:

  • green or gold beads;
  • beads 6-9pcs;
  • satin ribbon 1-1.5 cm wide;
  • wire 0.3mm;
  • scissors and pliers;
  • magnet;
  • simple glue gun.
Photo 18 - Simple wreath with Christmas balls

The first step, which is then repeated several times, will require one meter of wire.

Photo 19 - New Year's wreath from plastic bottles

At one end we make a small loop, we collect 10-12 beads - we twist it into a ring. Then, we repeat along the entire length of the wire, placing the formed rings tightly to each other.

Ball wreath

Photo 21 - Winter wreath from various decorative elements

To create a wreath of balls you will need:

  • balls of different colors and small diameters;
  • rigid wire;
  • glue;
  • satin ribbon 1cm wide.
Photo 22 - Technology for making a wreath

Felt wreath

Photo 23 - The idea of ​​a wreath of corks

A felt wreath will be an original decoration for your home not only on holidays, but all year round. Therefore, a reliable material should be chosen for its basis. Photo 25 - One of the options for a wreath of balls Photo 27 - A wreath of natural materials DIY Christmas wreaths: a master class Photo 30 - A wreath of colorful cones

After watching the video, you can familiarize yourself in detail with all the intricacies of making New Year's wreaths.

Hello everyone! We continue the theme of decorating our home on the eve of the New Year's holiday. And today I want to invite you to try to make a homemade accessory - a wreath. This is a very bright product that will attract the attention of every guest and create a truly festive atmosphere.

And it is done so easily and simply, it does not take much time, and at the same time any available materials and decorative means are used. The most important thing here is to learn how to make a frame, that is, the basis for a New Year's wreath.

You can buy a frame, for example, use a foam mold or a hoop, or make it yourself from paper, cardboard, wire or fabric. The following accessories are well suited for decoration: tinsel, rain, fabric, cones, spruce twigs, clippings from newspapers and postcards, ribbons, etc.

Also remember that this element is most often used to decorate doors, so do not forget about the method of fastening products.

It is now fashionable to replace familiar round wreaths with unusual shapes, such as stars and hearts. Therefore, think over the shape for your product in advance. Be sure to keep track of what accessories to choose for decorating such a craft. After all, the decoration should complement your entire interior.

Rather, start reading today's issue and then you will learn in detail about how and from what you can make wreaths for the New Year and Christmas.

In addition to doors, wreaths can be weighed on walls and shelves.

Now I will tell you how you can make such an accessory using thick cardboard and tinsel, as well as Christmas balls.

I also want to say that in such products, decorative elements must be combined in color so that they do not contradict each other, but, on the contrary, complement.


You will need:

  • tinsel in three shades;
  • thick cardboard;
  • Christmas decorations and other decorations;
  • Scotch;
  • scissors;
  • cord.


Manufacturing process:

1. Cut a bagel of the desired size from thick cardboard. Next, place Christmas tree decorations and other decorations on it in the order you like.


2. Now secure them with tape.



4. With the fastened tinsel, wrap the entire product in a circle.


5. Then wrap the craft in a different color with tinsel in the same way.


6. And for the third time, wrap the wreath with tinsel of a different color. You can use thinner tinsel as a last resort. And do not forget to fasten the ends of the tinsel.



After you learn how to make a cardboard frame, I propose to complicate the work a little and try to make a base from newspaper and fabric.


You will need:

  • newspapers;
  • kitchen napkins;
  • green organza (if necessary);
  • PVA glue or hot glue;
  • tinsel;
  • decorations.

Manufacturing process:

1. From the sheets of newspaper, twist a tube and make a ring. Wrap it with a few more sheets to make it sturdy. The ends of the newspaper can be glued together.


2. Now wrap the resulting ring with white paper napkins.



4. Then, on the base, fasten the tip of the tinsel and wrap the whole ring with it in a circle. Reattach the tip.



And now options for finished work using tinsel.




Christmas wreath of fir branches and cones on the door

I really love it when natural materials are used in crafts, especially cones and spruce branches. Firstly, such works always look natural and chic, and secondly, the coniferous smell from such products is present throughout the house.

Therefore, let's now try to make a wreath using cones and twigs. And we will learn how to make the base from a foam base and fabric.


You will need:

  • base form made of papier mache or foam (or cardboard bagel);
  • decorative wide ribbon;
  • decorative twigs with beads;
  • spruce twigs with cones;
  • large artificial flower (poinsettia - "Christmas star");
  • pins, scissors;
  • hot glue gun.


Manufacturing process:

1. Take the base and attach the decorative tape to the back with a pin. Wrap the base tightly.



2. Once you have completely hidden the base, secure the tape with a pin from the inside.


3. Now prepare the elements for decoration.


4. First, secure the beaded twigs.


5. And then the spruce branches with cones.


6. Glue the flower on top of the branches.


Or another way to make a wire base.

You will need:

  • wire;
  • fir branches;
  • strong black rope;
  • Christmas toys.

Manufacturing process:

First, make a round wire frame of the required size. Then form lush bunches of spruce branches, and tie them with black thread at the base. Then fasten the prepared bundles to the frame. Next, decorate your creation using toys, bows, ribbons. Tie a loop.


And here is a detailed master class on making a New Year's wreath from a purchased frame.


You will need:

  • a ready-made or home-made frame (you can use a wooden hoop);
  • twine or twine;
  • cones;
  • all kinds of decorations;
  • glue gun, scissors.


Manufacturing process:

1. Take spruce twigs and begin to fix them on the frame away from you on the right side. Fasten the twigs with a string, tying in three knots. In this case, do not cut the thread, but wind it through the frame and fasten all other branches in the same way.



2. At the very end, tie the string into a knot and fix it with hot glue. Make a loop.



3. Now lay out the decorations and define their place on the product. Glue the decor. All is ready!


And I suggest taking a look at the photo samples.







Workshop on making a wreath of balls

And now an interesting way to create accessories from Christmas balls. Let's take a foam circle as a basis. You can make a wireframe from the options already discussed.


You will need:

  • foam base;
  • Christmas balls;
  • beads;
  • ribbon;
  • spray paint;
  • glue gun.

Manufacturing process:

1. Take a Styrofoam base and paint over with gray paint. Dry the product.


2. Now glue small balls in size inside.


3. And on the outside, on the contrary, it is larger.



Balls can be used different not only in size and color, but also of different textures (matte, glossy, shiny).

Another creative idea. Maybe you will use it.


You will need:

  • wire;
  • wide tape;
  • factory Christmas balls;
  • glue gun.

Manufacturing process:

Make a round frame out of metal wire. Then string Christmas balls on the wire, while glue them initially to the metal loops. Decorate the finished craft with a ribbon.


I don’t throw off the samples of ready-made decorations this time, since they are all identical.

Making a wreath for the New Year out of paper

And we have another way to create products from plain paper ahead of us. This kind of creativity will be interesting for kids too, so be sure to involve them in the process.

By the way, we will make a bagel from newspaper tubes.


You will need:

  • newspapers;
  • PVA glue;
  • scissors;
  • brushes;
  • acrylic paint (white);
  • scrapbooking paper, colored or wrapping paper;
  • pictures on thick sheets (from old postcards, packages, boxes);
  • various other decorations.

Manufacturing process:

1. Roll newspaper sheets into thin tubes. Glue the ends of the newspaper with PVA glue. The number of newspaper tubes will depend on the thickness of your product.



2. Now take any round object and wrap it in tubes in several layers. Grease all the tubes with glue. When you have laid out all the tubes, grease the entire structure with PVA glue and let it dry well.


3. After drying, remove the workpiece from the round object and paint the base with white paint.



5. Place them on the product and then glue them.


6. Additionally, the craft can be decorated with sparkles or beads.


Now I will tell and show you how to make such beauty out of cardboard.

You will need:

  • colored paper, colored cardboard or patterned paper;
  • cardboard (for the base);
  • stapler;
  • scissors.

Manufacturing process:

1. Take white cardboard. Draw a round object on it. Cut out the circle.

2. Then draw a round object inside, but with a smaller diameter.

3. Cut out the middle.

4. Cut out petal-shaped pieces from colored cardboard.


5. Twist each petal at the base.

6. Start gluing the petals to the cardboard base.

7. Glue the pieces close together to form a twig.

8. In this way, glue the entire base.


9. Finally, glue the loop-ribbon.


As you can see, everything is very easy and simple. Any more ideas? Then catch it!




You can take a regular paper plate as a basis for crafts. Cut out the inner circle and decorate.

How to sew a New Year's wreath from felt + patterns

In addition to the usual and familiar options, you can and should also use felt and fabric. In this case, you can also sew a donut base from fabric and fill it with padding polyester. Or use frames made of twigs, paper and other materials, but still sew the decorations themselves.

I liked the following option. I share with you.


You will need:

  • foam base;
  • fluffy green threads;
  • ordinary sewing thread;
  • glue gun;
  • felt of different colors;
  • scissors;
  • patterned fabric of different colors;
  • fabric chalk;
  • cardboard stencils of figures: heart, snowman, herringbone, bell, etc.;
  • synthetic winterizer;
  • elements for decoration: ribbons, buttons.

Manufacturing process:

1. Take the base, fix the fluffy thread and gently, without glimpses, wrap the workpiece around the entire circle with it.


2. Secure the end of the thread with glue and protrude the villi up.


3. Circle a larger heart on the stencil on felt, cut it out (2 pcs.).


4. Circle a smaller heart on the fabric, also cut it out (1 pc.).


5. Now attach the small fabric heart to the large felt heart and sew it neatly.


6. Connect the pieces of the big heart, start sewing together. Then fill in with padding polyester and sew the blanks to the end.




8. Glue all sewn figures to the fluffy base.


9. Also tie bows from satin ribbons and decorate the craft with them.


Or choose from the following jobs.





And of course, diagrams, patterns and patterns for needlework.




DIY Christmas wreath from a hanger. Step-by-step instruction

You will need:

  • thick wire hanger;
  • sweets (lollipops or jelly);
  • braid;
  • scissors;
  • Double-sided tape.

Manufacturing process:

Unbend the hanger and form a circle out of it. You have a solid frame, and the "eyelet" is a mount for the hanging product. Scotch, fasten the braid to the frame and tie the candies with it in turn. The sweets should completely cover all the wire. Decorate the finished product with a ribbon.


You can also attach small scissors to the wreath so that everyone can cut off the candy and eat it.

And here is the beauty of the balls. You can also use tinsel and sewn figurines.


Video selection on what wreaths can be made at home from scrap materials

And in the end, try to make just such a sweet craft. I think this decoration is perfect for decorating a child's room.


You will need:

  • corrugated board;
  • two round objects of different diameters;
  • pencil;
  • scissors;
  • glue;
  • acrylic paint;
  • bandage;
  • double sided tape;
  • foam rubber;
  • candies in shiny wrappers.

Manufacturing process:

1. Take a piece of cardboard and trace a round object with a larger diameter on it. Cut it out.


2. Then draw a small circle inside the large one. You can also use a compass. Cut out the middle.


3. Make the exact same base (repeat steps 1 and 2). Glue the two pieces together.



5. Then cut the foam rubber into pieces and glue the finished frame with them.


6. Now wrap the base tightly with the bandage.



8. And then glue the whole frame with sweets.


9. Finally, fill in the empty spaces with tinsel or beads. Fix them with glue.


And, as promised, a selection of interesting and most creative ideas for your creativity.

Now you know how and from what you can make New Year's wreaths from scrap materials. Difficulties in such work will definitely not arise, and the process will be a pleasure, the result will delight the eye. Use the checklist below and you will succeed!

  1. Create or buy a frame of the desired shape and diameter;
  2. Fix the main material on the frame, on which the decorations will be attached in the future;
  3. Make eyelets to secure the wreath;
  4. Decorate the product using any available means.

I wish you all the best. Holiday greetings!