How to make a vehicle anestvik for the new year from girlfriend: fast master class with step-by-step photo. Toys do it yourself from kapron tights crafts for the new year from pantyhose

Snowman do it yourself. Master class with step-by-step photos

New Year's interior decoration with your own hands

Master class "Snowman from stock"

Author: Bulaneckina Tamara Aleksandrovna, educator of Madou Combined species of kindergarten №27 of Armavir.
Snowman
Come on, friend, bold, friend
Kati on snow their snowball.
It will turn into a snowball,
And it will become a com snowman.
His smile is so light!
Two eyes, hat, nose, broom.
But the sun will pay slightly -
Alas! - And there is no snowman.

V. Egorov

Purpose: Make a gift, interior decoration with your own hands.
Master class will be interesting to educators, parents and teachers, everyone who is interested in needlework.
On the craft, I was inspired picture among the illustrations on the New Year's theme. I decided to try to recreate the seen, but it turned out a completely different snowman, but it was so native (the stockings were mine). The toy is conserved: pretty mobile, depending on how you turn it, the snowman is changing and the mood. The kids toy will not exactly indifferent leave (verified), as a souvenir and for the interior decoration to the new year, it is very useful.
To work you will need: Golf or part of white tights (the less den, the better), sintepon or cotton, thread, needle, scissors, viscose napkins or pieces of fabric, which does not roll, ready-made eyes or beads, adhesive gun and ... good mood.


1. Take a white golf and fill it with syntheps, not very tight. There should be an oblong figure, it is from the bottom to tie on the knot. Precision cut and cut across in half



2.We make handles. Halves of elastic bands to twist so that the seam does not see, fill with syntheps


3. Clean mittens from napkins or fabric, sew decorative seam and put on the handles



4.We are taken behind the legs. Cut from dense cardboard (rectangle 10 at 12 cm) legs - paws and put cardboard in the stitched bag of fabric the same in form and size



On the one hand, which was left unimposed, put the filler - syntheps and sew.


5. And now the most important thing - head.To form a head at the top of the golf and drag a string.


6. Crow from the fabric with a hat for the size of the head (from a rectangle of 20 by 15 cm), stitch it and decorated with a contrasting cloth and on the edge of the caps of the baboons.




Cut the scarf


Krepim hat and scarf


7. Send the handles


Orange napkin or fabric sew nose-carrot


8. Sein snow feet



Glue eyes and embroider mouth. Snowman ready!




Let the new year fulfill the most cherished desires!

The wonderful holiday of the new year is approaching, which means it's time to prepare the New Year Christmas toys in advance with your own hands. Not necessarily to toys buy special materials and tools. Much can be found at home, as they say, "at hand." For example, old or new children's socks, golf, tights - great material for creating various toys. Let's try to make the original snowman from the tights with your own hands. Such a toy will never beat, will not cause allergies, it will be done to your liking.

All we need is:

  • tights (socks, socks) of white color;
  • colored tights or socks, ideally - red;
  • needle with thread;
  • buttons;
  • beads for eyes and spout;
  • filler (you can use not only wool, syntheps, but also various small cereals, such as a barley);
  • fabric flaps for snowman decoration;
  • scissors.
  • How to make a snowman from tights, master class:

    Prepare white tights or golfs. You can take the worn, since the stains will be invisible, because the snowman we will wear, and the white part will be only on the face. For a ready-made snowman height about 15 cm, cut off the blank with a length of 18-21 cm.


    The tip tighten the thread and remove inside out. If the fabric does not express the facial / auto side, then do not turn out.



    Put on the resulting bag overrun or similar camp. Praise a little, then wonder to stretch the fabric, then fall asleep and sink.


    The remaining "tail" tight tie a thread. Separate the body and the head of the snowman, pulling the rope slightly above the middle.


    For a sweater, take the tights of another color and use a part of the "sock".

    Dress the snowman in the sock, roll the neck as a real sweater.



    Encepting Buttons.


    Tie a miniature scarf or sew, and you can simply cut out of a beautiful cloth. Fantasize!

    For a snowman cap, cut about 13 cm from pantyhotes, tie one end, and other subjected.





    Sun with white threads of eyes and nose - beads. Instead of beads, approach and buttons, and buttons - invent yourself!

    In a few minutes we made a great New Year's decoration with your own hands, it turned out a great socks under the Christmas tree! And do not forget to invite kids to such work! The shared toy will become the most beloved! Create a New Year's fairy tale together!

    The long-awaited holiday of New Year's trees and bright lights is approaching, which means that it has come to please yourself and the Devora of Magic creativity. Nothing is delighted as a miracle created with their own hands. Moreover, if this is a miracle made of old, unnecessary things with minimal time.

    Material for the manufacture of snow:

    old white tights;
    long white sock;
    unnecessary socks (you can lean, but necessarily striped!);
    singry procession for filling;
    some rice cereals;
    beads for eyes, nose and buttons;
    scissors and threads with a needle;
    the box in which the exercise will "live";
    excellent mood and small helpers.

    Stages of making crafts

    1. From pantyhose with a suitable part without visible damage, holes, scuffs.

    2. On the one hand, the segment will cover an ordinary naval node.

    3. Fill the resulting pouch with a sinteration or other suitable material. At the very end, add some rice cereals for stability toys.

    4. The resulting snowman blank is securely sewn from below. We put a snowman and check how stable it is.

    5. The turn came to work striped socks. We will cut the part of the strips along with the rubber band and from the side of the cutting to the rope, pre-cut from tights. As a result, it turned out a pretty striped hat.

    6. From the residues of the sock cut the striped scarf. It can not be coated. Sticking threads will give a special mood.

    7. Dies on a snowman hat, we will clearly see where the neck should be. Tighten this place by a strip from tights.

    8. Tie the scarf Snowman on the neck.

    9. Now you need to "revive" the craft. Send beads eyes and nose. Do not forget about buttons. If you do a similar toy for a child up to three years, it is desirable to sew beads. Eye, nose and butchers can be sewed with multi-colored threads.

    10. By the same principle we collect a snowman-baby, only instead of tights better take a long white sock.

    On the eve of the New Year holidays, create a charming snowman from the girlfriend, which, I am sure, will have in every home.

    Such a cute snowman can be put under the Christmas tree, decorate them a Christmas table or give their loved ones as a small present.

    1. Children's tights with a lurex thread;
    2. Strong white threads;
    3. Needle for sewing and needle for embroidery beads;
    4. Lesk;
    5. Decorative tape of olive shades 1 cm wide - about 1 meter;
    6. 4 large white beads;
    7. 2 semi-graysins;
    8. Large round bead;
    9. Small red beads;
    10. Plastic snowflakes of different colors;
    11. Black, white and gray varnish;
    12. A piece of red ribbon about 20 cm long;
    13. White threads for knitting;
    14. Silver sequins;
    15. A small piece of curtain with embroidery;
    16. Wat;
    17. A piece of cardboard with dimensions of 10x10 cm;
    18. PVA glue and dragon glue;
    19. Thin wire.

    The process of performance

    Step 1: Make balls from tights and wool

    We take baby tights and cut off one side from them: there must be one long golf. Tie the end of the golf threads.

    From the wool we turn the ball and wake it in golf. Tuting the nodule, forming the first ball from golf and cotton. This will be a snowman head.

    Again, we take a piece of wool with dimensions of approximately 2 times more than the previous one and the balls turn out of it. Walk the ball into the golf. The end of the golf is tied by threads. It will be a snowman torso.

    We take a big piece of watts and twist the ball again. Watch that this ball be the biggest and, at the same time, harmoniously fit into the image of a snowman. Tie the end of the third bowl threads. It will be the bottom of the snowman.

    Step 2: Snow the snowman

    Cut the bottom of the golf. Threads sew the upper ball with an average, forming a stable and symmetric figure from the craft.

    In the same way, the needle with the thread we laugh the middle ball with the bottom. You must have such a pretty figure.

    Step 3: Making Pens

    From thin wire twist two identical segments about 10 cm long. Of course, you can take a thick wire, and then it is no longer needed to twist, but simply take 2 identical pieces of 10 cm. But I had only a thin wire, and I twisted it In several layers.

    From the tights cut off two identical pieces of fabric along the wire length. We leave on the tissue of the gaps for the sewing.

    We fold the tissue is halvened by the involving side. The needle with the thread we flash pieces of fabric. At the bottom, we narrow the seam, making it rounded. Soak fabric on the front side.

    We take two long pieces of wool and roaming them around the wire. Then foam the palms in PVA glue and twist the wire with cotton in the palms. After this procedure, cotton wool will be better to stay on the wire.

    Wake up a wire with cotton in fabric blanks for the handles. Send knobs to a snowman. Thanks to the wire, we can add a snowman handles as it will be convenient.

    Step 4: Make a Snowman's face

    Two white semobusins \u200b\u200bare sewn to the top ball of the snowman. In the middle, sew a large bead in the form of a nose. Red beads we flash the mouth of a snowman, forming a smile.

    Black lacquer blast the eyes and spout. In the eyes draw a gray lacquer iris, and on the spout we put the point with a white varnish, forming a glare.

    On the eyes, we put in the middle of black dots - pupils, and we put the glare on white varnish.

    Step 5: We sew a hat

    Cut a piece of old curtains in the width of a snowman's head. Send to curtains decorative tape.

    We sew fabric into the tube and cut off excess. We sew the top of the fabric, forming a hat.

    We take a white woolen thread and twist it between two fingers. We tie in the middle of the nodule and cut the thread. Cut the twisted threads at the ends and form a pomponchik from the craft. Scissors cut off the pompon sticking and embarrassed threads.

    Send a pomponchik to the header and put it on a snowman.

    Step 6: Make a vest and decorate the middle

    From the old gardine cut off a piece of fabric with embroidery. The size of the fabric must correspond to the width and length of the middle part of the snowman. Slash in the tissue of the holes for the handles.

    Decorative ribbon we are experiencing cloth around the perimeter. Then we are wearing a decorative ribbon hole for the handles.

    In the center of the middle part of the snowman, sew 4 large white beads. Wear a vest on a snowman. Needle with thread sew the ends of the vest at the bottom of the middle.

    We take a thin red ribbon and tie it around the neck of a snowman 2 times. Ribbon ends tie in a tie.

    Step 7: Send legs

    From a piece of pantyhose cut off two small slices. We fold them in half the outstand side up and sew. Excess fabric cut off.

    Soak stitched pieces face up. Two pieces of cotton twist in the fingers and put them into the stitched bags. Send legs to a snowman.

    Step 8: Make the bottom

    From a piece of cardboard, we cut off a piece with dimensions of 10x10 cm. With a glass or bobbin for the fishing line, we draw a circle on the cardboard and cut it out.

    On the entire area of \u200b\u200bthe circle glue to it. We leave the craft for the time for drying.

    Lovely form a peculiar "nest" for a snowman. We glue a snowman to the cotton with the dragon glue.

    Focus a thin brush in PVA glue. Then foam the brush with glue into silver sparkles and cover all the protruding parts of the wool.

    At the bottom of the snowman we glue plastic snowflakes of different colors.

    Our snowman is ready!

    Good luck to everyone, create and inspire. Happy holidays you!

    Pantyhose from Capron are a universal material for creativity - toys, mats and many other crafts make toys. Moreover, in the house where there is at least one woman, there should be not one couple who came into disrete to the tights.

    To create toys from stocking or tights, you do not need to have skills and special skills and use additional tools. Everything is extremely simple and clear, all the work can be done with your own hands.






    Doll-Neva (video)

    From those who came into disrete of colored stockings or tights, you can make a charming snake with your own hands. To create it, you must prepare:

    • capron colored tights;
    • scissors;
    • acrylic paints;
    • singrytegone Sheets;
    • three-core wire - 1 m;
    • nippers;
    • needle and threads;
    • beads for decoration.

    It is desirable that in the reserve there are several pairs of tights of the same color. You can not stick to the sizes specified in the class master and stick to your parameters, it will not be worse from this snake (Fig. 18).

    First of all, it is necessary to prepare a wire to work. With it all over the entire length, insulation is removed. Only two wires of three will be needed for work, they must be twisted. If you use all three veins at once, toys based on them will be even stronger.

    Squaterbuilding sheet should be cut into narrow stripes up to 2-3 cm wide and wid out with them as a tight wire. The most economical option will be the winding of the wire with a cheaper foam rubber, and then - syntheps (19). Layers when folding the snake, it is necessary to thoroughly soak, so that the crafts are not formed during the twisting of the crafts.

    The next step is to attach a holofiber in the area of \u200b\u200bthe serpentine head, from which the ball is formed. Before starting to pull down the kapron tights on the frame, it is necessary to pre-carefully dissolve the sources of the syntheps in such a way that they are not visible (20).

    In the tail of the stocking gently stretches, in the center of the carcass, it is necessary to stretch the tights and sew. It will be more convenient to sew a crawler if it is fixed with the help of studs or English pins.

    The hole in the center of the head should be sewn, subsequently it will become the mouth. The thread does not need to cut off. It is necessary to make a weight mood so that the central part of the nape from the middle of the mouth is recorded. Later, this seam on kapron tights can be masked by woolen hairs. Before immersing a needle to pantyhose, it is necessary to carefully select the place where the uterus will be died - the expression of the snake fruit.

    In order for the snake to become more elegant, over the entire length of its body you can sew sequins or beads. Eye will need to paint acrylic paints.

    Momber

    Soft toys can not look nice, especially if they are made with their own hands. From the Kapron Tights, you can make a lot of interesting crafts, in particular toys (Fig. 20). For its manufacture, a minimum of materials is enough - packing, cloth for nose, eyes, tights, threads.

    The head of the mouse should be made from a durable capron, a solid stocking is well suitable for this. It snaps immediately as much as possible. In parallel, you can fill with syntheps and spout stockings. The nose is sewn strictly in the center of the Mordaja. As in the previous cases, it is not necessary to cut thread. After it is removed outside, you can make a couple of stitches to create cheeks. If you make the correct stitches, the snake will look very carefully.

    The next step is the firmware of the eye. All this time, stocking stalls should not be tied - gradually more and more materials will be added to it, for high density of children's toys. After Lobik is filled, you can enjoy the formation of the ears - also with stitches.

    In order for the ears at the crafts to be standing, they can be made of wire, wrapped in tights. If you wish, the muzzle can be supplemented by the mustache.

    Thus, from a pair of old kapron tights, you can easily create funny toys with your own hands. The minimum of the time spent is the maximum of pleasure.