Institutions 

Men's slippers on the insole with their own hands. Stages of work. What knitting needles to choose for knitting slippers

Crochet slippers on felt soles Felt insoles are warm, soft and at the same time hold their shape well, so they are great as soles for slippers. Buy insoles according to your foot size and start knitting slippers with the help of this tutorial. For knitting slippers, you will also need acrylic yarn of medium thickness 150-200 gr, a thin thread can be made in several additions; hook No. 3-3.5; an awl or thick gypsy needle for pricking the insole. First, you need to crochet the insole along the edge with a row of single crochets. To insert the hook, poke a hole in the felt with a thick needle or awl. Pierce holes at a distance of 1 cm from the edge and 1.5-2 cm from each other. Knit 4 stitches from each hole. To do this, insert the hook into the puncture, grab the working thread and pull the loop to the edge of the insole, grab the working thread again with a hook and knit a column. So repeat 3 more times and pierce a new hole for knitting the next group of columns. At the corners for rounding out of holes, knit five columns instead of 4. Having tied the insole, make a connecting column in the first column and for knitting the first row, dial 2 air p. lift. Next, knit in a circle with semi-columns. Tie the side to a height of 2 cm, making 2 rows of semi-columns for this. and 1 row st. b / n thread of a different color. Start each row with a set of air. lifting loops and finish the connection. Art. from the last lifting loop. Having connected the side, proceed to knitting the upper part of the slipper, starting from the fingertips. Attach the thread to the corner of the upper part of the side and knit 9-10 half stitches along the toe. To attach a knitted row to the side part, through one loop along the side part to the next, knit the conn. Art. and make another connection. Art. in a row. Now turn the work and knit a row of half-columns back. At the beginning and end of each row, add one half-column to widen the foot and raise the leg. Having connected the upper part to the desired length, proceed to knitting the side part of the slipper. Work side piece in semi-columns 4-5 rows high back and forth, from one side of the top of the slipper to the other. To move on to knitting the next row along the edge of the upper part, knit 2 connections. st., then turn the work and knit the row back. In order for the slippers to sit tightly on the heel in the last rows, decrease by knitting 2 half stitches. together. In conclusion, along the upper edge of the slipper, tie 2 circular rows of art. b/n. To decorate a slipper, crochet a flower. Dial a chain of 7 air stitches, lock it into a ring and knit 2 rows of st from the ring. b / n, making 12 columns in the first row, 14 in the second, finish the connection. Next, knit the petals * 4 air.p., 3 sts with / 2n from the next p., 4 air.p., st b / n in the next loop of the row, repeat from * to * 6 more times. Sew flowers with a button in the center to the outer edges of the slippers to distinguish between left and right.

We knit crochet cozy indoor slippers-boots.
Slippers are knitted crochet from individual 6-coal motifs, the insole is purchased.
For work we need: yarn and hook, insoles, scissors, (needle).
I recommend choosing thicker yarn, and the hook for it is a little thinner than indicated on the package, so that it turns out to be quite dense knitting and the slippers held their shape.
Purchased insoles (one size larger than your foot size) - I recommend taking medium hardness, such that they can be pierced with an awl without much effort.
1. First, I tie the insoles, which I previously pierced with an awl, stepping back from the edge of 0.5 cm and the distance between the holes also made 0.5 cm.
When tying, I used single crochets, 2 in each hole.
Then you need to measure the length of the tied insole around the perimeter in order to further calculate the length of the side of the motif.
2. Next we knit 6 motives crochet(3 motifs for each slipper). It is also necessary that the length of the side of the motif, multiplied by 8, equals the length of the insole along the perimeter (if necessary, you can adjust the pattern by removing or adding rows in it).
3. We collect slippers. To do this, take 3 ready-made motives and sew them according to the following scheme: the sides marked with the number 1 are sewn with one seam. The sides marked with 2 are sewn together to form a back seam. The sides under the number 3 will be sewn to the insole in the future. The sides marked with 4 are not sewn together.
4. We tie the entire design of motifs to the insole, slightly shifting the corner of the nose to the right or left of the center (to get the right and left slippers). If necessary, the details can be pre-chopped with pins or basted.
We put on, we wear, we rejoice! :)















Crocheted slippers will warm you in the cold season. They are very light and comfortable. These products are suitable for both adults and children. You can fantasize about the style, knit in various techniques with a pattern or additional decorative elements. Shoes with felt soles will last more than one season.

We bring to your attention detailed diagrams, descriptions and videos on how to crochet slippers with felt soles.

Indoor slippers

Beginners in crochet should start with slippers, as this is the easiest way to learn how to perform various techniques in practice.

Preparation for work

For needlework, you need to prepare:

  • hook - the number of the hook is selected depending on the thickness of the yarn;
  • yarn - woolen or half-woolen is suitable for such a product, the amount is selected based on the size;
  • felt insoles - in accordance with the size;
  • awl or thick needle.

All tools are ready, you can start knitting. For beginner craftswomen, a video lesson has been prepared with a detailed description of the work.

Step-by-step instruction

Holes must be made in the insoles with an awl or needle. This is done at a distance of 0.5 cm from the edge of the insole, a gap of 0.5 cm is left between the holes.

The first loop can be knitted in any hole convenient for the master. Having threaded the thread into the first loop, it is necessary to make a knot, and then knit according to the scheme: single crochets in the holes, 1 air loop between the columns. So knit the entire row around the perimeter of the sole.

The next step is to tie the inner layer of the slippers. To do this, you need to dial a pigtail 5 cm long shorter than the insole, and then knit according to the scheme:

You can consider the principle of knitting in more detail in the diagram.

Masters advise knitting this part 2-3 mm less than the insole. In this case, the sole will be more even and will not stretch, even if the felt decreases in size after shrinkage. The connected part is sewn to the insole with a needle over the edge.

The sole of slippers is ready, you can proceed to the upper part. To do this, dial 5 air loops, and then knit as follows:

You can use your imagination and complement the shoes with pompoms, knitted flowers or embroidery.

Slippers children's Czechs

It is easy to knit such comfortable shoes - having studied the step-by-step algorithm, even an inexperienced knitter will cope with the work. First, imagine the finished product. Czech shoes are comfortable indoor shoes with a semi-closed top.

For work you will need:

  • Crochet hook;
  • yarn;
  • felt insoles of the desired size;
  • awl;
  • needle with a thick eye.

The first step is to make holes along the edge of the insoles using an awl. The edge of the insoles is tied in the following way: 1 column in each hole; 1 air loop. Now you need to tie the inner insole for each slipper. Traditional knitting technique is as follows:

Details are sewn to felt insoles with a regular needle. Next, the main part of the Czechs is knitted.

Knitting pattern:

  • slipper side - along the perimeter of the insole, all loops are knitted st. With. n., knit 2-3 rows, depending on the thickness of the yarn;
  • the upper part is performed separately, after which the parts are connected;
  • for finishing, you can choose an accent from a thread of a contrasting color.

You can see this knitting method in detail in the video.

Closed slippers with laces

In this master class with step-by-step photos, you can get acquainted with knitting closed slippers with laces. These shoes are great for little kids. It is easy to put on and take off, and thanks to the laces, the slippers will not slip off the baby's legs.

To work on the product, it is necessary to prepare insoles, a hook, an awl and yarn. It is necessary to connect all the details step by step in the following way.

Using various crochet techniques, you can create real masterpieces - not only warm and comfortable, but also very stylish. To learn the technique of knitting slippers crochet on a felt sole, you can watch a free video lesson.

Knitted slippers










Many people prefer to wear home slippers - flip flops, without heels, they are convenient to put on and take off with one movement of the foot. To crochet slippers- flip flops will require a sole or an insole that holds its shape well, you can use dense felt insoles with a sewn-on lining at the bottom.

To knit slippers, take 50 grams of acrylic yarn in two contrasting colors, a dark tone for knitting the insole, and a light color for knitting the upper part of the slippers.

First you need to link upper part of the insole and connect it to the felt sole. To knit the insole, cast on a chain of air loops with a length equal to the length of the insole minus its width.

Tie the initial chain in a circle, making art. b / n along the narrow part of the foot, and to expand the foot, knit 3 half-columns, on the wide part, knit st. s / n. Closer to the fingers, on the last 6 loops of the chain, knit 3 half-columns, 2 tbsp. b / n, from the final loop of the initial chain for rounding, knit 5 tbsp. b/n. On the underside of the initial chain, knit stitches in reverse order.

Knit the second row of the footprint in the same way as the first, increasing the height of the columns in the wide part of the foot. To round the footprint at the fingers and heels, add evenly 3 tbsp. b / n, knitting at three points from one loop of 2 tbsp. b/n.

The bonded insole should be the same size as the felt sole.

Felt sole tie around the edge next to st. b/n. To do this, pierce the sole with a thick gypsy needle or awl at a distance of 5 mm from the edge. Insert a hook into the holes formed, grab the working thread and pull the loop to the edge of the sole, knit st. b/n. In places of rounding, make two or three columns from one hole.

Do not break the thread and knit a row of st. b / n to connect the felt sole and the associated insole, for this knit st. b / n along the edge, introducing the hook simultaneously into the half-loops of the insole and the strapping of the sole. When finished, secure, cut the thread.

For knit top slipper if you have a thin acrylic thread, make it in two additions. Attach the thread to the corner of the sole at the thumb, knit a short row of st. b/n. To knit the next row, instead of the instep air loop, make a connecting column along the row of the sole.

Turn work and * knit the next row of st. b / n back, starting from the second loop from the hook. At the end of the row, make st. b / n from the side of the sole and a connecting column instead of an air lifting loop for the next row. *

Turn the work and repeat from * to *, in each row one column is added to expand and lift the foot.

To decorate slippers, tie a chamomile flower with lush thin petals of yarn in a contrasting color.

For the center of the flower, tie a bump. Dial a chain of 5 air sts, close it in a ring, knit st. b / n in a spiral, always inserting the hook into the center of the ring, until a voluminous bump is formed.

Beautiful and cute house slippers will decorate any home. In the meantime, you can make such a charm yourself. All you need to create your own little masterpiece is thread and a crochet hook (or knitting needles). In addition, a person should know the rules of crochet for beginners. To do it yourself, very dense threads are used.

Some stores even have an indication on the skeins that they are used for knitting slippers. For a beginner needlewoman, puzzled by the question of how, it is best to get used to a specific example.

Beautiful and interesting slippers will sit perfectly on the leg and please the eye. However, initially the leg is measured in height and width, and according to the measurements, a pattern is made. To understand how to calculate the pattern and make it, pay attention to the photo below.

slippers pattern

Let's say a person makes slippers as a gift, and he cannot try on the donee's leg, then the plate will help.

size table

Crocheting slippers on your own is easy, even inexperienced craftswomen can usually handle it. When all the necessary blanks are made, selected, we proceed to the implementation of the sneaker.

  1. First we make the heel. We collect loops in the amount that is needed.
  2. We look at the patterns to clarify their number and density.
  3. After that, we crochet single crochets.
  4. We add one loop on each side until we finish the heel.
  5. Next, we will make the canvas to the middle of the foot and again add one loop from the beginning, and then at the end of the row.
  6. We knit our fabric to the end of the little finger.
  7. After we do this, we decrease on both sides in a uniform way, somewhere in 3 or four loops.

Now we step by step create the upper part of the slippers.

  1. We make it from the bottom up, making reductions.
  2. We collect as many loops as necessary.
  3. We knit columns without a crochet, and in the middle we decrease every 3 rows.
  4. We continue our knitting until we make the height we need.
  5. It remains to collect the product. We connect the sole and the upper part.
  6. And at the edges we knit connecting posts.
  7. When we made slippers, we knit the second one.
  8. If this is your first time crocheting slippers with your own hands, then you can first use one color. But then you can make multi-colored ones - from two or 3 tones.
  9. At the end of knitting, we decorate our slippers with pompoms either.

Here are some cute slippers you should get:


Slipper squares are used as part of the motif. You can make other things with the same squares - for example, and also a scarf, and more. Now let's move on to the example for slippers.


DIY square slippers

Do not forget about the pattern for slippers - it must be done. Then we knit motifs, while choosing simple patterns for knitting slippers for beginners, or you can use the one below.

Slipper knitting pattern

Such a knitting square is called grandmother's. To create it, create a chain of 4 loops, make a circle. The beginning of the row consists of three lifting loops, and at the end there must be a connecting column. Further, at the beginning it is knitted less than in the next arc.

Perhaps you did not quite understand how to crochet slippers with such squares. Experienced knitters advise trying to make 1 sample square. Then it will be easier for you to navigate.

  1. The first row consists of 11 double crochets, which are tied into a ring.
  2. In the second row, two double crochets are knitted into each previous column. These two columns are connected to the following air loops (one piece).
  3. The third row is done in this way. In the previous row there were air loops. Of these, 3 columns with a crochet are made, which are connected to the next three columns with air loops - once 3 pieces, and 2 times one at a time.
  4. We make 4 rows. Our guide will help you. We knit 3 air arcs from the third row as follows: two double crochets, then 1 air loop, then one double crochet, again one air loop, and finish with two double crochets. These arcs are connected by 1 air loop. An arc was made from one air loop. From it we knit three columns and connect with the next 1 air loop.
  5. The fifth row will be our last. In an arc consisting of two air loops, it is necessary to knit 3 columns with a crochet, connect 1 time with 3 air loops. The second time we connect one air loop with the column that comes next. In an arc consisting of one air loop, we knit 3 columns with a crochet. We connect with the next 1 air loops.

Such a crochet slipper pattern for beginners helps to create a solid square or multi-colored ones. Slippers are combined as follows: with connecting posts. Combine 4 squares, you get one large square, which I unfold in the shape of a rhombus. Another one of the same is applied to the edge of the lower corner, sewn together, the heel is sewn to the sole.

Then the side triangle and heels are divided into three parts. We sew all adjacent parts. When our slippers are ready, we tie them on top with half-columns in the amount of 1 row.

To sew such slippers without a single seam, first we knit the sole according to the pattern, which can be seen below. And our master class and tailoring will come to your aid.

Seamless slippers

We collect 23 air loops, in each row 3 air loops at the beginning. They are needed in order to raise the row, so they are left.

Knitting pattern without seam slippers for beginners:

Knitting pattern for seamless slippers

  1. 1 row. We knit two double crochets, then one st.s / n. Having reached the end of the chain, we knit 4 columns in the last loop. We knit a circle on the other side of the chain - 1 half-column in each loop, then you need to knit three columns with a crochet into the very first loop.
  2. 2 row. 3 lifting loop - to create 3 columns with a crochet. Then in a circle we knit 15 columns with a crochet in each loop, another 20 half-columns, then 14 columns with a crochet, and between the loops two columns with a crochet.

Now we need to fabricate up. From the half-column of the heel we draw 3 air loops. We break the thread. We knit the first row with double crochets in the amount of 56 pieces. The second row is this way: first there are three columns with a crochet and two columns made from one loop, 5 columns and 2 more also from one loop. Next 12 columns.

We skip one loop, make a rapport: two columns with a crochet of 2 knitted together, two loops together with a crochet 2 times, we knit two loops together, we make a column with a crochet from them. Then we make 2 loops together with one column and two more columns, make a report, and knit 10 columns with a crochet.

The third column consists of 26 double crochets, with two columns from one loop, then one double crochet. repeat 5 times and end with 10 double crochets.

The fourth row is almost like 3, only there are 25 columns. Similarly, 2 columns from one loop and two columns with a crochet. Continue 6 times, then make 8 double crochets.

And finally, the fifth row, consisting of double crochet columns, with which slippers are tied.

We hope you understand how to crochet slippers without a seam with your own hands. To decorate the edge of the sole, a crusty step is used, and then we create a second slipper. Our beautiful slippers for beginners can be further embellished with embroidery or beads.

There are a lot of different models that you can make yourself with a hook and thread: flip flops, shoes, sneakers, in the form of some toys. To make such a pleasant surprise yourself, you only need patience, imagination and a little free time. You can also additionally watch video instructions for children's slippers and products on the sole: