We sew a Greek dress. Dress in the Greek style: revealing the secrets of style

It is not so difficult to sew a dress in the very Greek style with your own hands. The pattern is quite simple, and if you have certain skills in sewing and modeling, you can easily cope with the task.

Every woman's wardrobe should have this dress. It is a real salvation, a lifesaver in various situations. This style suits almost all types of figures, it can be festive and everyday.

For full ladies, the style will help to drape a few centimeters, which they consider superfluous, and for overly fragile ladies, they will give more rounded shapes and emphasize the waist and outline the chest favorably.

The main distinguishing features of the style are a free cut, a waist line under the bust, charming draperies, flounces and folds. The main advantages of a dress in the Greek style are its elegance and femininity, elegance and accessibility.
Dresses in the Greek style are so popular and in demand that they can already be classified as a separate direction.

Sleeves. The classic dress in the Greek style did not provide for sleeves, but the style did not suffer at all from their appearance. But he has gained many followers who, for one reason or another, prefer long sleeves. The main condition is that the style of the sleeves does not stand out from the general image, that is, they also flow in folds.

Strap on one shoulder. Actually, Greek dresses were originally worn that way. The shoulder strap can be decorated with rhinestones, or pearls, or a fibula decoration.

Casual. Perfectly combined with various accessories, refresh the image and remain invariably feminine.

Cocktail Dresses. As a rule, a few centimeters above or below the knee. Asymmetric cut is allowed.

Evening dresses. As a rule, the length is maxi, sometimes it provides for the original decoration in the form of an ornament.

Ombre. Initially, of course, there was no talk of any color transitions. However, it is worth recognizing that the gradient transition of color from dark to light breathed novelty into dresses in the Greek style, becoming a real find.

Learning to sew a dress in the Greek style with your own hands

Traditionally, such dresses are sewn from light flowing materials such as silk, satin, muslin, jersey, fine knitwear. The fabric should not be very wrinkled and obediently fit into the folds. Light colors predominate. If you decide to sew a Greek dress yourself, then you should pay attention to fabrics that do not crumble along the edge, this will greatly simplify sewing and reduce the lead time. There are fairly simple ways to independently create, if not a masterpiece, but a completely wearable Greek dress. For the first method, you don’t even need to sew anything. True, you can’t wear such a dress in the city, but on the beach, over a swimsuit, such an outfit would be appropriate.

First way.

You will need a piece of fabric at least two and a half meters long, one and a half meters wide. Two pins and a cord for a belt. Take the fabric at two corners along the long side, from the back. Pin the corner of the fabric in the left hand to the fabric on the right shoulder. On the left shoulder, fasten the sagging fabric with a pin. Belt around the waist. You will get a frivolously swinging Greek dress, in which it is not a shame to walk along the beach.

The second way.

The pattern is elementary, on the dress you will need a piece of fabric equal to your height in centimeters, multiplied by two. This length will be enough for a maximum length dress. You will also need a cord for the waistband and underbust, a ribbon 5 cm wide, long enough to wrap twice around the waist.

The fabric must be spread on a suitable surface, you can also on the floor. Mark the middle along the long side - this is exactly the part that will fall on the shoulders. Measure the middle of this line, and draw another line perpendicular to it, at least fifteen centimeters. This will be the opening for the head and neckline. Determine the depth of the neckline yourself - if the figure allows, you can deepen it almost to the waist, so as not to be mistaken, you need to measure it over the body, putting on the future dress. The cord must be grabbed in two places - immediately under the chest, and at the waist. Gather on the shoulders and fasten with pins to start. Next, you need to put on the blank again to form beautiful folds and draperies. Tie the first ribbon under the chest, on the naked body under the fabric. And to this tape we begin to pin the fabric folded into folds with pins. Folds form from the shoulder to the chest. Repeat the same procedure with the tape at the waist. Grab the finished folds with threads. Make the back in exactly the same way. From the side, at the ends of the inner ribbons, sew on small buttons and loops so that the dress can be freely removed and put on. On the front side of the dress, sew ribbons that duplicate the inner ribbons to which the folds are sewn. The dress is ready!

Video on the topic of the article

Greek dress is one of the favorite models of the most famous designers. Such popularity is due to the fact that this style can be draped right on the body. Therefore, when creating such a silhouette, the main thing is not how to sew a dress in the Greek style, but how to drape its fabric.

Models were created in this way in ancient Greece. Frenchwoman Madame Gré revived this method, making it both classic and modern. No wonder many celebrities Marlene Dietrich, Jacqueline Kennedy and Grace Kelly preferred the Greek dress.

How to sew a Greek dress with your own hands?

Textile. When choosing a fabric for a Greek dress, you should not save on footage. Beautiful and decorative will turn out if you take at least a three-meter cut.

Preference should be given to light flowing fabrics such as satin, fine knitwear, velvet or muslin. According to the sensations, it should be a thin, viscous, easily draped fabric, not very wrinkled. If, in addition, the selected material does not crumble at the cut, then sewing will be even more simplified. After all, time for processing sections, hem, and armholes is not required.

Pattern. If a girl tries her hand at tailoring for the first time, then you should choose a style with a minimum number of seams and special treatments. In the presented version, the length of the fabric for the pattern is two lengths of the dress.

Sewing. In order to understand how to sew a Greek dress of this style, you need to carefully consider the pattern and the final version, and then drape the folds and sew on decorative cords. They can be made from pieces of the remaining fabric or you can pick up a plain braid in the store. This model is designed for a slim figure with a small chest.

Dress in the Greek style without a pattern

But how to sew a Greek dress without a pattern? The main principle here is: “wrap up and tie yourself up.” This style is suitable for women of different builds. Decorative drapery is located in accordance with the features of the structure.

  • The top of the dress is loosely fastened with pins and brooches on the shoulders.
  • Then, with lacing, narrow braid or banks, the dress is fixed at the waist or.
  • All folds are laid depending on the style and are also fixed with lacing.
  • Then the dress in the places where the dress is assembled is finally fixed with threads manually or on a sewing machine.

In another version, the fabric is initially fixed on one shoulder. Sometimes additional wrapping of fabric around the body is used.

How to sew a dress in the Greek style - photo and video

Greek dresses made of white or ivory fabrics combined with exquisite brooches, pearl bracelets and necklaces will create an image of a real Greek woman.

To enhance the effect, you can style your hair with careless curls or braid it into pigtails, which are so popular now. Of the shoes, sandals with straps and lacing will be the most concise.

A dress made of dark fabrics is suitable for celebrations. Here, small classic jewelry made of precious metals and stones, high-heeled shoes and small bags will be especially appropriate: a clutch, a small theater bag.

The two-tone fabric looks especially beautiful.

The length of the Greek dress can be maximum or minimum, like a tunic. Our gallery presents variants of Greek dresses of different lengths, fabric structure and color palette.

Greek-style clothes - dresses, tunics, blouses - have been on the fashion catwalks for many years now.

True, the price of some models is quite high. If you are on a budget, don't be discouraged. Such clothes are good because it is very easy to sew them with your own hands, without any patterns. And sometimes you don’t even need to sew!

So, we decided that cutting out patterns from magazines and downloading from the Internet is not required. But what you can’t do without is, of course, fabric. You will also need scissors, matching threads, a few meters of braid or decorative tape, and a sewing machine. But even if it is not there, it does not matter, you can sew the dress by hand.

A few recommendations for choosing fabrics: they should be light, flowing, thin, so that the dress turns you into a real Greek goddess. If you want a long outfit, the cut of the material should be at least three meters, for a short dress, one and a half to two meters is enough.

So, we bought the fabric, stocked up on threads, and now, in fact, about how to sew a dress in the Greek style. There are several ways.

The first way is the easiest. You don't even need to sew anything. You just need to take a piece of fabric, wrap yourself in it, forming beautiful draped folds, and pin the ends with pins or a decorative brooch on your shoulder. You can take and bandage the resulting dress under the chest. Ready! This is an ideal option for the beach - the dress is light, flying, seductively swings open with any gust of wind, showing off your tanned forms. If you want a more complete outfit, you can simply sew it on one side, from the armhole to the hem. And the ends of the other, again, stab on the shoulder. The image can be complemented with suitable accessories and shoes in the Greek style.

The next way, how to sew a dress without a pattern, is not much more complicated than the previous one. We take a piece of fabric, lay it out on the floor. We find the middle and draw a line in small. This will be the shoulder line, from which the front and back of the dress will go in both directions. We find the middle of this line and draw a perpendicular line that goes on one side (back) less, and on the other (front) - more. This will be the cutout for the head.

Now you can try on the dress and, if necessary, deepen the neckline. In principle, it can be at least up to the waist. Then you need to pick up each side of the neckline on the shoulders and under the chest, fix the result with braided pins. You can place another braid at the waist. Let's try again. If the way the folds are arranged suits you, you can sew on a braid or ribbon white.

The same can be done on the back. And you can leave the middle of the cutout to sag freely - to make a "rocker". We sew the side seams, and on the side, at the ends of the ribbons, you can make a fastener with a button or Velcro.

The third method is suitable for you if you have a short, tight strapless dress, but for some reason you don’t wear it. After reading the next paragraph, you will understand how, based on this "slip".

Actually, everything is the same as before: we wrap ourselves in fabric over a tight-fitting short dress, form a beautiful drapery, pin or sew the ends on one shoulder. Separate folds are sewn with hidden stitches to the base dress. The fabric can be opaque or translucent - it all depends on the desired effect. If you do not have such a base, you can also sew it yourself, for example, from elastic knitwear. How Very simple - we simply sew a rectangle of the desired length and width along the side seam. Due to its elasticity, it will take the shape of your body.

Now you know how to sew a dress without a pattern in the Greek style. And with a little experimentation, you can create several outfits of different colors, shapes and lengths. We wish you creative success!

Hardworking - a bright light burns through life, lazy - a dim candle

Greek dress without a pattern. 3 ways to sew yourself

comment 17 comments

Your goal- These are light flowing fabrics (muslin, satin, silk, jersey, thin knitwear, velvet). The fabric should be fluid, thin, easy to fit into soft folds and not wrinkle much.

(By the way, please note that among the flowing fabrics, you can find those that do not crumble on the cut, then you will not need to process the edges after sewing the dress.) The length of the cut must be at least 3 meters.

We will create a dress in the Greek style ourselves. And no patterns! Just a flight of fancy and a mirror. And every woman must have both.

Don't have a sewing machine? So to create a Greek dress, it is not particularly needed.

Have you never sewed anything? And the Greek dress does not need to be “sewn” in the generally accepted sense of the word (with drawings of patterns, darts and darts).

Method One: "Wrap Up and Tie Up"

Here is a visual diagram:

Two decorative pins on the shoulders and tie with a ribbon at the waist or under the bust.

Of course, this simplified version of the dress will swing open in any wind. Therefore, it is this model that will be appropriate at a beach resort over a swimsuit.

And in order to make a full-fledged Greek dress out of this, all you need to do is sew the sashes of the dress along its right side from bottom to top so that the body does not look out. The result is an elegant outfit in the Greek style.

This model is good because, while not fitting the body at all, it nevertheless emphasizes the beauty of its curves, thanks to the fluidity of the fabric, seductively flowing over the body. And according to this method of modeling, completely different dresses can turn out, depending on what color and quality of fabric you will use to create them.

For example: ivory satin, a string of river pearls around the wrist, a discreet but exquisite brooch on the shoulder made of the same pearl, hair scattered over the shoulders - and you get the image of a young Aphrodite emerging from the foam of the sea, and your wardrobe is replenished with a fashionable day-type Greek dress .

Or the same model: black silk, a brooch on the shoulder and a gold-colored bracelet, smoky eye makeup - and this is an evening look of a formidable goddess.

The second way: drapery on the body

The great French fashion designer Madame Gré created her dresses in the Greek style, draping them by hand on the body of the model. Her way of making antique dress became classic, and her clients included Grace Kelly, Jacqueline Kennedy, Marlene Dietrich and Barbara Streisand.

As the ancient Greeks used to say: “Not the gods burn the pots,” and we will try ourselves as a fashion designer.

Here is a picture of a Greek dress made from a single piece of fabric.

High-fashion? Yes, high, but not so high that we could not reach it.

What do you need: the fabric is a little more than 2 times your height from heels to shoulders (if you want a dress to the floor). A decorative braid or ribbon of such length that it is enough to wrap around itself under the chest and at the waist twice.

Let's start. They spread the fabric on the floor, found the middle on it and drew a line in chalk. This line will lie on your shoulders.

Now in the center you need to make a hole for the head - draw a perpendicular line (about 15 cm to start with, so that the head crawls through) and cut it with scissors.

We put our head in the hole, and now we need to decide to what level we will deepen the neckline. ( The dress in the photo has a waist-deep cutout. But after all, you can stop it under the chest, tie it with a ribbon there, and then you can no longer wrap another ribbon around your waist, let the fabric flow freely down, starting to fall right from the ribbon under the chest. And it will be a slightly different model of the Greek dress, less frank). But let's continue...

So, they put it on the head, and marked the desired level of cutout depth on the fabric with chalk. They removed it, spread it on the floor, drew a line to our mark and cut the cutout to the end with scissors. Along the line of the shoulders, the fabric was gathered with pins and then we proceed as shown in the figure.

They tied a ribbon under the chest, but not over the fabric, but under it, on the body. We take the pins and, laying the fabric in folds, pin them to the ribbon, draping first one chest, then the other.

About the same we do with a tape at the waist.

Now, when we already see the image of our future Greek dress, and we are satisfied with how the fabric lay down, you can thread the needle and, taking out one pin at a time, sew our folds to the ribbon with large stitches (or you can sew everything all over again, and then already remove the pins). Stitches can be made oblique and crooked, anyway, we will sew on top of another ribbon or braid, and we will already sew it neatly.

So, we blinded the front of the dress in the Greek style.

You can do the same thing on the back as on the front - with a cutout and two ribbons. Or show your imagination, play with drapery. Using the method of pins and pinches for hair, find the very location of the folds when the fabric flows in the most interesting way for you, emphasizing your strengths and hiding your flaws.

The pictures show 3 ways to drape the back of the dress. The third way "swing", is achieved by shirring the fabric up (the left and right edges of the fabric are gathered, and the middle sags freely, forming these most beautiful “rockers”) Accordingly, for the third method, fabric on the back hem needs 1-2 meters more.

But when playing with fabric and fantasizing, keep in mind that the dress must be provided with free entry and exit, that is, somewhere it must be fastened and unfastened. It is best to sew on the side, at the ends of the ribbons of the front of the dress, one elegant button, and at the ends of the ribbons of the back of the dress - a loop. Thus, it turns out that the dress above the waist does not have side seams, but is fastened with buttons (or Velcro, or decorative fasteners - to your taste).

The third way: drapery on the "lining"

Let me explain what a "slip" is. Imagine that you have a short dress in a figure, that is, almost in a slip. But you don’t wear it and you won’t wear it, because once you spilled bleach on it, and the stain cannot be removed. And if you still haven’t thrown it out yet, then rejoice, you don’t have to sew a slip on purpose - this dress will serve as an ideal basis for creating your new gorgeous dress in the Greek style. That is, it will be this very “lining”.

Put on the slip, take a flowing fabric in tone, throw it over your shoulder (or cut a hole for the head, as in the previous method), form folds and pin them to the slip with pins. Then sew them on first with a rough thread with simple coarse stitches, take out the pins, try them on again and, if everything suits you, sew them on by hand with neat neat stitches.

Pull out the draft thread, cut off the excess fabric, if necessary, make a seam. As a basis for drapery, you can use not only a sheath dress, but also a tight-fitting T-shirt or bra. The main thing is that the drapery completely hides the base, and the base itself is the same color as the drapery fabric.

As you can see, a Greek-style dress can literally be made with “bare hands”. Without any drawings and mathematical calculations. Guided solely by intuition and a sense of beauty.

Go ahead, take the fabric and try, create! And you will definitely succeed!

As the ancient Greeks said: "To learn how to play the harp, you have to play the harp."

And if you want to know more, then you are welcome to follow the link. You will learn how the unsurpassed Alix Gret and Madeleine Vionnet created their Greek dresses.

Situations when you urgently need a festive outfit are not so rare. It is not always possible to quickly pick up something suitable in the store, and it can be quite expensive. But if there is a sewing machine at home, the problem is solved by itself. To sew an evening dress, even a pattern is not required. Making a dress in the Greek style with your own hands is within the power of any woman who owns a little needle. Read about how it works in our article.

Models of Greek dresses

A do-it-yourself Greek dress differs from all others in its free cut and a large number of folds, which sometimes fit right on the figure. But styles can be different:

  • seamless;
  • with a seam in front;
  • with two seams on the sides;
  • with detachable bodice;
  • with a long neckline;
  • with a square or round neckline;
  • open shoulder.

Choosing a fabric

Before you sew a Greek dress with your own hands, you naturally need to choose what exactly to sew it from. Several factors influence this:

  • season;
  • model;
  • fashion trends;
  • your ability to sew;
  • availability of necessary equipment.

These considerations are taken into account when choosing the material for any dress. Greek is typical for summer, so light fabrics that fit perfectly in folds are preferable:

  • crepe de chine;
  • batiste;
  • chiffon;
  • thin silk;
  • gauze;
  • jersey;
  • polyester .

What to give preference to be cheap and not particularly troublesome? So:

  • The ideal material is, of course, knitwear. It has sufficient width, drapes beautifully and lays down in beautiful folds. But it needs a special needle. You can buy it at any sewing store.
  • Thin natural and artificial silk is also not bad, but it will be difficult for a beginner seamstress to work with such a fabric - it crumbles a lot and also slips.
  • You will need more gauze, because it is completely transparent, so it is better to make a dress in several layers. This, of course, is not a problem - the material is quite cheap. However, you can get out of the situation in another way - to sew a cover. But this will require additional time and material.

Dress with detachable bodice

You can also sew a dress in the Greek style with your own hands according to the pattern. If you master this model, making all the others will seem like a trifle.

For this style you need:

  • the cloth;
  • hidden zipper;
  • sewing machine;
  • threads that match the fabric in quality and color;
  • tape measure;
  • ruler;
  • pencil;
  • scissors;
  • pattern;
  • graph paper, tracing paper or other large format paper.

Taking measurements

Know your measurements better. Of course, if you sew a loose dress without a pattern, the number of measurements required will decrease dramatically. But for modeling patterns you need:

  • length of the product;
  • half bust:
  • semicircumference of the hips;
  • half waist.

Modeling a pattern

Before you sew a Greek dress with a detachable bodice, you will have to tinker a little with the pattern. Any one that can be used to sew a dress or a classic style blouse is suitable. It must match your size. It is most convenient to transfer the patterns of the shelves and backs to graph paper:

  1. Circle the patterns for the front and back, ignoring the tucks.
  2. Draw a chest line on the details of the shelf.
  3. Step back from it down 8-10 cm, draw a cut line parallel to it.
  4. Draw the same line on the details of the back.
  5. On the middle line of the shelf, mark the depth of the cut - this point should be just above the cut line.
  6. On the shoulder line, mark the width of the neck - for this you need to move the point, which is located at the base of the neck, 2-4 cm along the shoulder line.
  7. Connect this new point to the cutout depth mark.
  8. Connect the cutout width point with the end of the bottom of the armhole with a straight line.
  9. On the back, also mark the width of the cutout.
  10. Connect this point to the bottom of the armhole.
  11. Circle the patterns along the middle lines, cut lines, modeling lines.
  12. Cut out the details of the bodice.

Important! The skirt does not need to be modeled. It is cut simply from a single piece of fabric and is sewn only along the side seams.

Cooking details

On the panels of the skirt, it is better to leave the edges - this will somewhat reduce the labor costs for processing the seams. How you process the bottom depends on the material. If you are going to hem the hem, you need to leave the appropriate allowance. But, for example, some types of knitwear do not need to be hemmed at all - it is enough to process the sections with an overlock.

Important! The same should be done with the details of the knitted bodice, then there will be much less problems when assembling - in any case, you will not be afraid that a loop will go and an arrow will form on your magnificent outfit. So to start, overcast the neckline and shoulder bevel lines.

We start with the bodice

At this stage, you will need tailor's pins:

  1. Sew up the side seams.
  2. Try what you got.
  3. Lay and pin the folds along the shoulder seams - there will be few of them, only one or two on each shoulder, but they should be strictly symmetrical.
  4. Stitch the shoulder seams, taking into account the folds.

Skirt

The details of the skirt are two rectangles in the entire width of the cut. It is better to cut them directly on the fabric. For this, all you need is to mark the length of the product from the bottom of the armhole to the cut of the hem on the edges. From above, where the bodice will be stitched, you need to leave an allowance of 1-1.5 cm.

Here's how it all goes:

  1. Think about whether you will have a skirt with or without side slits.
  2. If a cut is expected, mark its length from the bottom along the edges.
  3. Sew up the side seams.
  4. Lay the folds along the upper cut so that they are uniform, but at the same time that the top of the skirt is the same length as the bottom of the bodice to which it will be stitched.
  5. Baste the skirt to the bodice and see what you got.
  6. If you like how your dress fits, feel free to sew the details.
  7. After that, it remains only to process the cuts where you have not done it yet, and decorate your dress.

Important! Such a dress can be worn with a belt - if there is a long enough strip of fabric left, it will fit perfectly.

DIY Greek dress without a pattern

This is the easiest version of the dress. Even an inexperienced seamstress can do it, because in this case there is almost nothing to sew, and even more so, you don’t have to bother with modeling a pattern.

You need the most common tailor's accessories, only you need to take more pins - folds can be laid:

  • only on the shoulders;
  • on the shoulders and chest line;
  • on the shoulders, chest line and waist line.

Important! A thin flying fabric that easily forms folds is suitable. The wider the cut, the better. Materials with a width of 140-160 cm are quite suitable. In any case, you will need 2 lengths, plus 10 cm for the belt and other little things.

Here's how to sew such a Greek dress with your own hands:

  1. We fold the fabric in half, combine the edges (you can even sweep or chop them).
  2. Divide the fold line in half, put a point.
  3. From this point, we set aside the estimated width of the cutout - it is equal to the half-girth of the neck, plus another 2-3 cm in both directions.
  4. We decide where the cutout will be deeper - in front or behind. If on the back, the incision can be made in general almost to the waist.
  5. Draw a perpendicular down from the middle of the fold along the desired side.
  6. We mark on it the depth of the cut.
  7. We connect the resulting mark with the points of the width of the cutout.
  8. We cut the cutout - along the fold line between the points of the width and down to the depth.
  9. The dress is tailored.

Assembly

The assembly of such an outfit will be even easier than dresses with a bodice. But some operations are best done with an assistant. Actually, you only need to lay the folds, and this can be done during the fitting, and sew the side seams:

  • Mark the depth of the armhole on the edges - it should be the same on both sides.
  • Sew up the side seams.
  • Try on your creation.
  • Ask an assistant to lay the shoulder folds - they can be located towards each other or vice versa, but it is important that they are symmetrical.
  • Sew up the pleats.
  • Finish the cut.

Important! If you are sewing from knitwear, then you just need to sheathe it with an overlock. If the fabric is silk or cotton, hem 0.5 and 1 cm, and iron.

  • Work on the bottom.
  • The sleeves do not need to be processed, since the edges remain.

Important! If the cut is very wide, and the figure is slender, the side seams can not be sewn, it is enough to lay the folds on the shoulders, and the structure will only hold on to the belt.

Dress with a square or scoop neckline

It is sewn almost the same as the previous model. The only difference is in the way the cut is modeled and processed:

  1. In the same way, fold the fabric in half and connect the edges so that they do not move apart.
  2. Find the middle of the fold.
  3. Set aside on both sides the half-girth of the neck, divided by two, plus another 2-3 cm on each side.
  4. Draw a perpendicular to the middle of the fold.
  5. Set aside the depth of the cutout on it - in this case it will be equal to the same quarter of the neck circumference, plus 2-3 cm.

Option 1

For a semicircular neck, connect the resulting point with the cutout width marks with a smooth arc. In this case, it is very useful to make a cut in the middle of the back and insert a hidden zipper there.