Wire bike. Do-it-yourself bicycle - a piggy bank of master classes using various materials

31.07.2019

Decorative bicycle made of twine and tubules. Master class with step by step photo

Master class on needlework "Cache-pot - bicycle"

Kotlyarova Olga Yuryevna, teacher of additional education, MAOU DOD "House of Children's Creativity" MO "Leninogorsk Municipal District" of the Republic of Tatarstan.

Master class for senior students, teachers and parents.
Purpose of the master class: interior decoration, souvenir for relatives and friends.
Friends, I suggest you make a decorative planter for all your loved ones for calendar and family holidays.

I will ride the bike for a long time.
In the deaf meadows I will stop him.
Narva flowers and give a bouquet,
The girl that I love.
Narva flowers and give a bouquet,
The girl that I love.

Target: to teach how to make a planter - a bicycle from waste materials.

Tasks: to expand knowledge in the field of arts and crafts, the development of creative potential, the formation of ecological and aesthetic culture when working with waste material.

Detailed description of the master class "Cache-pot - bicycle".
Necessary materials:
- thread "twine"
- thick cardboard
- pencil
- cocktail tubes
- glue "Titan"
- coffee beans
- scissors

Progress:

1. We take thick cardboard, apply an object that is very similar to a wheel (for example, a reel of adhesive tape), circle it, cut it out. For one wheel, you will need 2 pieces of cardboard, they must be glued together. You need to make 3 such bases for the wheel.

2. We wrap all blanks with jute twine.

3. We take a cocktail tube, measure 2 centimeters before the bend and after, cut it off - these will be the spokes of the bicycle, this is necessary for the stability of the structure. For one wheel you will need 4 blanks. Since there are 3 wheels, 12 pieces need to be made. Then wrap all the blanks with twine.

4. 4 blanks wrapped with twine are glued together with Titanium glue, like this.

5. We insert this design into a cardboard circle wrapped with twine. The wheel is ready. For a bicycle, you need 3 of these wheels.

6. We take whole coffee beans and glue on one side 2 back of the bicycle wheel.

7. We take a cocktail tube, measure 2 centimeters before the fold and 3 centimeters after the fold, cut it off. We will need 2 such blanks for the steering wheel. Now they need to be connected to each other.

8. The steering wheel that turned out is wrapped with twine.

9. Take 1 cocktail tube, measure 11 centimeters, such a blank will fasten the rear wheels together.

10. At the steering wheel, which we have turned out and the parts for fastening the rear wheels, we decorate the edges with small coffee beans.

11. We take one tube, bend and stretch where the fold is. The tube on the short side must be cut, smeared with a drop of glue and inserted into it the segment remaining from the blanks for the wheels.

12. We wrap the resulting structure with jute twine. Such blanks will need 2 pieces.

13. Let's start assembling the bike. We insert a straight tube into the rear wheels using Titanium glue.

14. In the front wheel, insert the blanks from item No. 11.12. Glue for strength. We decorate the front wheel on both sides.

15. Insert a piece of tube 2 centimeters long between the upper tubes and glue it.

16. What happened is wrapped with twine.

17. Let's take a container that will directly act as a planter (for example, from yogurt, butter). Wrap with twine and decorate with coffee beans.

18. Glue the steering wheel and pots. We insert artificial flowers into the pots. The planter in the form of a bicycle is ready.

You can put any flowers you like in a flower pot, both artificial and live.
I wish you all creative success!

With the help of the original flower pots, decorations are made. Such a product will emphasize your individuality, will become an idea for decorating the interior of the house, an interesting gift.

Bicycle with flowers

To make a bicycle with flowers, you will need a nylon thread. Take cocktail tubes, a package of glue, cardboard, and a tool - scissors. Prepare beads, a small pot. To decorate the product, buy ribbons of different colors. You can also use sequins.

In general, the manufacturing process will take a little time if you follow the instructions.

First of all, you should cut out three identical wheels, then wrap them with nylon thread.
It should be cut off 2 cm from the top of the tube, in the same way, take four blanks to prepare one wheel. Then it is also necessary to wrap the threads. Four parts must be connected with glue. Then connect the wheel to this part.
Prepare two straws for a cocktail. One part should be stretched, the upper part should be cut off in another tube. Then insert it into the stretched part. The blanks that were made as a result of this process should be wrapped with thread.
Steering wheel manufacturing. You need to cut the top of the tube, which is about 2 cm before the bend, and 3 cm after the bend. Then connect the parts, wrap with thread.
After that, it's time to assemble a miniature vehicle. To fasten the rear wheels, take a tube, the length of which is 11 cm.
Then wrap it with thread. The parts should be fastened together with glue.

Empty jars or small plant pots are used as bicycle planters. They should also be decorated. To do this, they are pasted over with a nylon thread, fixed in the area of \u200b\u200bthe location of the rear wheels. The pot must be filled with flowers. Depending on the width of the ribbon, flowers should be selected. The tapes should be kept horizontal during this process. Wrapping occurs diagonally, as a result of which 1.5 cm remains.

Important! A decorative bicycle for flowers will become a really small masterpiece if you approach the process carefully. To make flowers, you need to take ribbons of different shades. It is necessary to wrap the end of the ribbon around the middle until you get a flower of the size you need. Then cut off the excess pieces.

Decorate a flower bike with sequins. A homemade bow can be glued to the front.

Planter bike

For this floral composition, you will need a wire with a diameter of 3 cm. Prepare a white teip tape, as well as a thin skewer. For the manufacturing process of the product, you will need scissors, round-nose pliers.

Wheels are made from wire. You will need 3 large circles for the front wheel and 6 parts for the two rear wheels. With the help of a teip tape, the parts are connected, as a result of which 3 elements are obtained.

The frame for the decorative vehicle is double. Prepare 2 long pieces of wire, in this case 50 cm is enough. After bending, wrap them with tape.

Then comes the assembly process. The large front wheel is located in the bend of the steering wheel, in the middle of which the frame is attached. Knitting needles can be made in the form of interesting curls. Three pieces are enough for one wheel.

All elements are attached to each other with tape tape.

A decorative bicycle is decorated with a basket of flowers. To make a basket, you need two circles made in a similar way. Their diameter is equal to the diameter of the front wheel. Inside the basket are attached special twigs made in the form of curls of wire. Eight pieces are enough to decorate the basket.

Then take a ready-made bouquet, or prepared on your own to decorate the basket.

Note! Often such miniature bicycles are varnished. Such a measure will allow the product to serve for a long time without losing its quality properties. Tape tape after such a coating will not get dirty.

You can also change the color of the decorative bike itself. Use golden acrylic. With it, you can achieve a bronze effect.

Flowers can be made independently using bead weaving. To do this, use the French technique. In order for such flowers to hold, they can be attached to the foam.

Decoration in the garden - photo ideas

conclusions

Such a small decorative product will really decorate any interior, or an original gift. Making will not take much time or effort, you just need to follow a small instruction, prepare materials.

The planter bike looks amazing. If you previously singled out such products in stores, for example, you noticed what a unique style, uniqueness they create. Made independently, jewelry is in no way inferior to a purchased product.

This article contains several workshops on making a bicycle quickly and easily with your own hands from improvised materials with step-by-step photos and videos. Such a product will serve as an excellent element of home decor and will be the subject of surprise and admiration for all guests.

We make the composition "Flower Bicycle" with our own hands

To create this decorative composition, we need:

Decorative bicycle, which can be purchased at a specialized store, or made by yourself, guided by master classes from the Internet;
corrugated paper;
Styrofoam;
Toothpicks, glue, glue gun, thread or wire for attaching flowers;
Decor elements: tulle, bows, beads, ribbons, homemade beaded flowers, sisal;

First you need to make a small bouquet of flowers from corrugated paper. To do this, you need to cut a rectangle measuring five by seven centimeters, fold it in half, round one edge and gently stretch it.

Now you can start making petals. You need to cut a strip of paper measuring ten by five centimeters, and fold it in half twice. Then you need to cut out a petal of this shape, as shown in the photo below, and tuck it a little with an ordinary handle. Further, these petals must be attached to the bud and secured with wire.
Flowers can be made in any shape and size, and when you have enough of them, you can start creating the composition itself. The bottom of the wicker basket of the bicycle must be filled with a piece of foam and fasten paper flowers and beads on it with toothpicks. You can also add green sisal and various elements in the form of decorative bugs and butterflies. Our flower charm is ready!

We make a bicycle from straws for a cocktail quickly and easily

To make such a charm, you need a little waste material and a few hours of free time.

Tools and materials for creating this product:

Tubes for cocktails;
Disposable plastic cup;
Scissors, toothpicks, cotton swabs, adhesive tape;
Threads, bandage.

For greater clarity, this master class is presented in the video photo instructions.

In this master class, we will show you how to make an original flower pot with your own hands.

A planter in the shape of a bicycle will be a very unusual home decor or a gift for relatives and friends.
To create such charms with our own hands, we need:

Wire two to three millimeters wide;
Teip-tape white;
Four white buttons;
Glue "Moment" or glue gun.

First, you need to make three circles of different sizes from the wire and wrap them with teip tape. Now you can add curls to them and fix them well.
The same curls need to decorate the entire bike.
The next step is to create a basket for our bike. It is made using the same technology as the bicycle itself and is fixed with glue.
It remains only to make flowers from sweets and decorate the product with them.

We create a very cute decorative bicycle with our own hands

To create such a miracle, we need:

Several blanks from cardboard;
Small wooden stick;
A piece of thread, toothpicks;
Scissors, glue.

First you need to make a basket out of cardboard. To do this, cardboard strips must be glued to the bottom of the product, as shown in the photo below.

And then weave a basket out of them.

In the same way, only with the absence of weaving, you need to make three wheels.
Next, you need to take a small wooden stick, two strips of cardboard and a thread and make a fork out of them for the future bicycle.

The details that turned out at the end need to be glued.
The handlebar of a bicycle is made of cardboard and thread, and is also decorated with some kind of decorative element.

Here is what should be the output:

Let's make a decorative planter bike out of twine and fragrant coffee beans

For work we need:

Cardboard;
Tubes for cocktails;
Leg-split;
Coffee beans;
Polymer glue;
Scissors.

On cardboard with a compass, you need to draw circles, as shown in the photo below and cut them out with scissors.

Then these blanks must be wrapped with twine.
In the straw for cocktails, you need to cut off the excess, leaving about two centimeters from the bend on both sides. You need four such blanks to make one wheel for a bicycle. Next, each tube must be tightly wrapped with twine.
Now you can assemble the wheels, as shown in the photo below.

Then you need to take two tubes, stretch one, and cut off the top of the other and connect them as in the photo below. Two such blanks need to be wrapped with twine.

The steering wheel must be created by cutting off the top of the tube, leaving two centimeters before the bend and three after it. Wrap them with twine.

The next blank for the steering wheel is a tube eleven centimeters long, wrapped with twine.

The wheel needs to be decorated with coffee beans. It is necessary to insert two blanks into the front wheel and fix them with polymer glue.
Between the rear wheels you need to insert a straight tube and fix it with glue.
A piece of tubing must be inserted between the upper ones. And wrap the place of their attachment with twine.
The role of the cache-pot here will be played by an empty jar. You can decorate according to your taste.

Video on the topic of the article

At the end of this article, a selection of thematic videos is presented on how to make a bicycle topiary, make a cute cradle for this type of transport, or arrange your composition in the steampunk style.

We make the composition "Flower Bicycle" with our own hands

To create this decorative composition, we need:

Decorative bicycle, which can be purchased at a specialized store, or made by yourself, guided by master classes from the Internet;
corrugated paper;
Styrofoam;
Toothpicks, glue, glue gun, thread or wire for attaching flowers;
Decor elements: tulle, bows, beads, ribbons, homemade beaded flowers, sisal;

We make a bicycle from straws for a cocktail quickly and easily

To make such a charm, you need a little waste material and a few hours of free time.

Tools and materials for creating this product:

Tubes for cocktails;
Disposable plastic cup;
Scissors, toothpicks, cotton swabs, adhesive tape;
Threads, bandage.

For greater clarity, this master class is presented in the video photo instructions.

In this master class, we will show you how to make an original flower pot with your own hands.

A planter in the shape of a bicycle will be a very unusual home decor or a gift for relatives and friends.
To create such charms with our own hands, we need:

Wire two to three millimeters wide;
Teip-tape white;
Four white buttons;
Glue "Moment" or glue gun.

We create a very cute decorative bicycle with our own hands

To create such a miracle, we need:

Several blanks from cardboard;
Small wooden stick;
A piece of thread, toothpicks;
Scissors, glue.

First you need to make a basket out of cardboard. To do this, cardboard strips must be glued to the bottom of the product, as shown in the photo below.

And then weave a basket out of them.

The details that turned out at the end need to be glued.
The handlebar of a bicycle is made of cardboard and thread, and is also decorated with some kind of decorative element.

Here is what should be the output:

Let's make a decorative planter bike out of twine and fragrant coffee beans

For work we need:

Cardboard;
Tubes for cocktails;
Leg-split;
Coffee beans;
Polymer glue;
Scissors.

On cardboard with a compass, you need to draw circles, as shown in the photo below and cut them out with scissors.

Then you need to take two tubes, stretch one, and cut off the top of the other and connect them as in the photo below. Two such blanks need to be wrapped with twine.

The steering wheel must be created by cutting off the top of the tube, leaving two centimeters before the bend and three after it. Wrap them with twine.

The next blank for the steering wheel is a tube eleven centimeters long, wrapped with twine.

Video on the topic of the article

Today's lesson is devoted to such an interesting topic as weaving from jute twine. From this material, very interesting things can be done. This tutorial shows how to make a bike box.

We will need:

twine of 2 colors (light twine is made by soaking for a couple of hours in chlorine);
glue gun;
coffee;
wire;
glue Titanium;
dried mandarin skins.

I took my favorite ceiling tile, I really like working with it, it does not lead to glue, it is easy to cut ...
So we cut out 3 wheels.

And start wrapping twine on double-sided tape.

And then I make the windings of the wheel and in the center I fix them together ...

And I start wrapping the knitting needles ...

Here they are my wheels, ready!

Now we take the wire of the length you need and begin to wrap it with twine on Titanium glue. We make holes in the center of the wheels with an awl and insert the crossbar wrapped with twine.

Then we cut out the ring in diameter the same as that of the future box ... and wrap it with twine.

Then we'll paste it here. The crossbar should not be less.

And now we make the frame of our bicycle ...

I'll show you closer ... It was made from 2 parts: the singing one is the steering wheel. We start with the left handlebar, go around the wheel and cut the wire (I'll show you why later) and deliver the right handlebar. (I hope I explained clearly). My husband glued it with a soldering iron, but you can, I think, with a hot gun.
And the second detail: we make the letter "l" from the wire, squeezing at the base and slightly bend the top and glue it to the steering wheel, and bend the ends and glue it to the back crossbar.

Let's try the box...

That's just the detail about which I described above ... This is a steering wheel wrapped only from below, near the wheel. We reach the middle, make a hole in the front wheel and thread a wire into the wheel ... Now it will be clearer.

Here's what happened. We glue the ring for the box to the crossbar.

Here is the first example. The bike is ready, it remains only to make the seat, front fender and headlight.

I'll show you how I did it. We take a tight file, I took a transparent folder (it's more convenient, the file starts to crawl). On a piece of paper we draw what we want to do: I have a seat and a wing. Coat with Titanium glue and begin to lay out with twine. I took a lighter one to shade the whole bike. We are waiting for 1 minute, when the part grabs a little, remove it from the folder and turn it over and give it the desired shape. We wait a little, the glue dries quickly. Then we cut off unnecessary glue from the sides with scissors and glue it on a hot gun to the bike. I cut the fender into 2 parts, cut out a recess in the place of the cut, and attached it to the bike with a hot gun, then the 2nd part. Well, the seat and headlight. Faro is easy to make, twisted into a circle and glued to the file, when it was dry, she already glued it to the bike, in the center of a grain of coffee.