How to wash a white wedding coat. How not to do it. In the washing machine

20.05.2019

Modern technologies make it easy to create things from artificial materials, which in their properties and characteristics are not inferior to natural ones.

Things made of faux fur are proof of this. They look no worse than things made of natural fur. Naturally, she clothes are inferior to clothes made of natural fur in terms of thermal characteristics, but today's article is not about that, but about how to care for things made of eco-fur and how to wash faux fur at home if it gets dirty.

Benefits of faux fur

By the way, faux fur, beloved by many, has some advantages over natural fur:

First of all, this is its low cost compared to products made from natural fur.
Made without the use of animal skins.
You can clean or wash a faux fur product even at home.
Many things are sewn from artificial fur: fur coats, vests, capes, bedspreads, pillows and much more.

You can wash eco-fur fur at home, but it is advisable to do this preferably no more than once a season. In this case, you must adhere to certain rules, because if you wash it incorrectly, faux fur can simply be ruined.

Primarily, faux fur product needs to be prepared for washing. To do this, it must be knocked out of dust and carefully, but carefully combed. If the product is large, then it can be vacuumed using a soft brush nozzle of a vacuum cleaner.

Preparing the fur for washing

Before you start washing, look at the label of the faux fur product, the manufacturer may not recommend washing it in a washing machine and only the hand wash option is suitable. In addition to the washing mode, the label should indicate the temperature of the water for washing.

Do not wash delicate, long-haired faux fur in the washing machine, as the fur will stick together and you will not be able to comb it.

How to wash faux fur

Although some people may advise you to wash your eco-fur clothes in the washing machine, don't do it. It is better to wash it by hand.

If you need to wash a separate section of the product, wash it with a brush well moistened with warm water and soap, and then rinse under running water.

Step-by-step instruction:

If you need to wash an entire piece of faux fur, then do it in the bathroom or in a large basin.
To do this, fill it with warm water and add washing powder, stirring the water until the powder is completely dissolved so that no particles remain. Soak the fur product in soapy water and leave for 30-40 minutes.
After the product has been in the water for the specified time, wring it out in a towel and rinse first in warm and then in cold water, adding a little vinegar to it. This is necessary so that the product is soft and the fur is shiny.
It is necessary to dry the faux fur product in a natural way, that is, not on heating devices. After wringing out the product in a towel, lay it in a horizontal position on the grate above the bathroom or in the yard, but not in the open sun.
The dried item must be combed with a brush.

On a note: faux fur cannot be washed like regular clothes. It can not be rubbed, wrinkled and squeezed hard.

If you find a greasy stain on a product made from this fur, try to get rid of it with a cotton swab dipped in an acetone solution.
Before you start washing a fur coat or other white faux fur product, you should make sure that there are no yellow spots on it. If you find them, get rid of them using one of the methods described in this article.
After washing white faux fur, blue it.
Store outerwear made of faux fur by hanging it on a hanger in a hanging position. First place the item in a special case.
You can’t fold fur things, as it will be difficult to straighten them later. If this still happened, read the article from which you will learn how to do it right.

We hope you find this article helpful. We also ask you to share your results with our readers and tell us in the comments how you washed faux fur!

One of the advantages of faux fur is that it is easier to care for. Natural fur contains special fat components that make the product shiny and elastic. But the washing process will certainly dissolve this fat, and after that the thing will become crumpled, hard, with a fallen pile. The basis of faux fur is, most often, synthetics, it is much easier to tolerate washing. So, how to wash faux fur at home - in a washing machine or by hand?

It must be remembered that things made of faux fur are cut out from whole pieces, and not sewn from small pieces, like real fur products, so they are not threatened with a divergence at the seams from the fact that the fibers become brittle during washing. But with faux fur, you have to be very careful when trying to wash it. It is not a good idea to start washing if the pile is long, if the product has a pattern, and you need to remember that the fur is afraid of hot water and aggressive drying. In most cases, it still needs to be cleaned, not washed. And also faux fur has such a nuance: it does not have a given direction of the pile, therefore, immediately after washing, so that the villi do not bulge in any direction, when the fur dries, it must be smoothed with your palms.

Can faux fur be washed in a washing machine?

Before you put a faux fur thing in the car, you need to carefully consider the possible consequences. Evaluate the quality of the fur, the length of the pile, what the manufacturer writes about washing on the label. The shorter the pile, the less the risk of damaging the thing with a machine wash. But it is better not to experiment with fur of dubious quality.

If you decide to wash your fur product in a typewriter, then this should be the most gentle wash. Owners of machines with vertical loading can be more calm about the result, because. their programs are less intense.

Wash your fur with liquid detergents that you normally use for the most delicate fabrics. And don't forget to add conditioner. You can also wash with a simple powder, but there is a risk that it will not rinse properly.

It is important that during washing there is nothing else in the drum except fur. The thing itself is better to turn inside out.

The method of washing faux fur at home using a washing machine is recommended as follows. After putting the fur in the machine, turn on the soak mode. After 20 minutes, switch to Gentle Rinse. Moreover, if your machine does not have a gentle spin function, i.e. no more than 400 rpm, then it is preferable to turn it off completely. The basis of artificial fur, most often, knitwear, and he really does not like twisting. Therefore, taking out the unwrung fur from the machine, squeeze it lightly with your hands to drive the water away. While the drops continue to drain, attach a fur product over the bath, and it is better to dry it in a dry, but at the same time, ventilated place. Comb the dried fur with a comb.

If your machine has a wool washing function, then this program is also suitable for faux fur. There, the temperature regime is suitable - 30-40 degrees, and the minimum spin.

How to wash a faux fur blanket

Cozy soft faux fur blanket, when wet, will become very heavy, so it is difficult to wash it by hand. The washing machine will be quite capable of doing this, as long as the product is allowed to be wet cleaned.

Shake the dust out of the blanket before washing. You can use a vacuum cleaner. This will improve the quality of cleaning. Select the appropriate program for the most delicate wash, for example "Hand Wash", but at the same time turn off the spin cycle. It is optimal to wash such a blanket at a temperature of 30 degrees.

When choosing a detergent, it is better to stop at liquid, because. powder grains often get stuck in the depths of the villi and are poorly rinsed out.

Faux fur is highly electrified, so after washing it must be rinsed with an antistatic agent.

To remove water from a washed blanket, do not twist it. Let it drain first, then wrap it in a large towel to absorb excess moisture. Then lay it out on a dryer, or hang it on a sufficiently thick and smooth crossbar. Do not dry on a rope, so that there are no kinks, which will then be difficult to get rid of.

How to wash a faux fur coat

Although faux fur is not as afraid of moisture as natural fur, it is worth washing a fur coat in water only as a last resort, when ordinary cleaning no longer leads to a neat appearance. Fur coats with long-haired fur or with a pattern should not be washed at all, especially machine wash.

If the manufacturer allows washing a fur coat in a machine, then choose the mode, temperature, detergents, drying rules are the same as for washing other things made of faux fur.

A fur coat that does not have a very short pile should be washed by hand. Take cool water in the bath. Pour the right amount of washing gel, whip up a light foam and lower the fur coat there. Let it get wet for half an hour. After that, change the water to clean, rinse the fur coat. Repeat rinsing if necessary. Then fill with water again and add conditioner with antistatic agent. Rinsing in this water will give the fur coat softness, shine, and eliminate static electricity.

Hang coat to dry. When the water drains, smooth the pile with your palms. Leave to dry naturally. Comb the fur.

How to wash a faux fur hat

Long or short pile for a faux fur hat - it doesn’t matter, it’s better to wash it by hand. Do not twist, do not stretch. Wash gently with liquid detergent in cool water. Shake off the water and place on the dryer. Pay attention to the pile after washing. Smooth it down with your hands. And when the hat is dry, comb the pile.

If white fur has acquired a grayish or yellowish tint over time, the color can be refreshed by treating it with a peroxide solution. Dilute a tablespoon of hydrogen peroxide in a liter of water. Pour the solution into a spray bottle. Hang a fur coat over the bath and treat the fur with peroxide from a spray bottle. Then wash the fur coat in the manner chosen according to the manufacturer's recommendations. Instead of peroxide, you can take lemon juice diluted in half with water. After washing, to restore whiteness to artificial fur, it can be blued.

NATA CARLIN

- soft, warm and beautiful. While new! However, any thing gets dirty over time, and some knowledge and effort are required to put it in order. This is especially true for things made of fur. Probably not every woman knows how to wash fur.

To understand this issue, you need to understand the difference between furs and fur itself. The category of furs includes short-haired types of skins of the following animals:

Sable;
Mink;
Seal;
Marmot;
Squirrel;
Muskrat.

Furs include processed mezdra:

Raccoon dog and raccoon;
Foxes;
Black-brown fox;
Arctic fox, etc.

As a rule, skins of long-haired animals are considered to be fur.

The main methods of cleaning fur are divided precisely into these categories.

Do not believe sources that claim that fur can be washed by completely immersing the product in water or a solution. No expert will advise you to do this. After all, natural fur should never be washed at home using a similar technique. In addition, if you do not trust other people's advice, take it to a good dry cleaner, where it will be cleaned quickly and efficiently.

Dry substances.(fur coats, hats) take dry powders:

Starch;
Oatmeal flour;
Small sawdust (except coniferous trees).

The method of using the funds is as follows:

The product must be folded into a large basin;
Sprinkle with dry matter so that it is evenly distributed over the entire surface of the thing;
With your hands, begin to crumple the material and shake the fur. Do this carefully so as not to damage the fur;
Now take the fur coat or hat out of the basin, hang it on a rope outside and gently shake off the remnants of the product.

Fine dry particles absorb grease, dirt and dust residues, and foreign contaminants.

Combing. For regular combing of furs, purchase a special comb. If you have not found such a tool on sale, use a regular massage. However, do not use the one that you comb yourself. Buy a new item. This is for your safety. Animal hair can contain a large amount of pathogenic bacteria that, if it gets on your hair, will harm your health.
Sand. The fur of aquatic animals (otters, muskrats, beavers, sea otters) needs special cleaning. Fine river sand is suitable for them. Heat the sand in a frying pan to a temperature that the body tolerates. Spread a fur product on a flat surface and rub the sand into it in a circular motion. Do not overdo it so as not to damage the fur.
Special combs. Cleaning furs is a painstaking and long process. For it, special combs are used with long, medium frequency, teeth rounded from the middle. Wrap a thin layer of cotton wool on each clove (secure with a regular thread), soak in a specially prepared solution, and comb the skin according to the growth of hairs. For a cleaning solution, ordinary soap and water, alcohol or kerosene are suitable. After the procedure, hang the thing on the street to dispel unpleasant odors.

Tip: Primary pelts should not be wet cleaned under any circumstances. It is difficult to distinguish a high-quality product from a low-quality one in today's market conditions. Unscrupulous manufacturers and sellers are constantly trying to pass off low-grade raw materials as perfectly processed skins in order to sell at a higher price.

Therefore, choose things according to one, the most important feature - the smell. Solid, high-quality raw materials should not have it at all. None! Properly dressed skin does not smell.

If you clean the primary skin with aqueous solutions, this will lead to irreparable consequences. In low-quality fur, a large number of bacteria have been preserved, which are activated in a humid environment, and simply “eat” in a matter of days. In addition, low-quality fur does not provide the necessary warmth, harms human health, and after a short time loses its aesthetic characteristics.

How to dry natural fur?

If you nevertheless carried out wet cleaning (not washing) of products from, try to dry the product properly. For a hat, prepare a blank made of wood with a diameter of up to 60 cm. Do not use three-liter jars, as our grandmothers did for drying mink molds. Wood is a hygroscopic material that absorbs excess moisture from the underside of the product.

A fur coat, jacket, sleeveless jacket or short fur coat made of natural fur is best dried on a coat hanger. Try to fasten the thing only from below. The top is best left unbuttoned. Leave the product in the air for three hours. After that, turn inside out, and leave for another 2-3 hours. Then re-hang the thing in front of you, and leave the fur to dry completely. Now comb the fur according to the growth of hairs with a massage brush.

The same goes for winter weather conditions, when a hat and coat can get wet in snow and rain. Observe one condition - do not hang a fur coat to dry next to heating appliances.

How to wash faux fur?

Most happy owners of beautiful and warm fur bedspreads do not know how to wash a blanket from. And, can it be done at all? For this category of fur products, the answer is unequivocal - you can! Wash short pile blankets by hand or in a washing machine. The washing temperature should not exceed 50˚. The product label must indicate the maximum possible temperature for each type of artificial fur. By turning on the unit on the delicate wash mode, you do not risk spoiling the thing.

However, it is necessary to rinse the blanket after the washing machine several times. To do this, add a fur conditioner or ordinary table vinegar to the first water.

To wash the item by hand, soak it first in warm water with detergent. Liquid soap is great for this, and shampoo is better. Do not wash the fabric as you are used to washing other fabrics. Remember it in your hands without rubbing. Rinse in several waters as indicated for machine wash. Do not press in the usual way. Lay the thing on a horizontal surface with a slight inclination, let the bulk of the water drain. After that, lay a rag on the grate for drying clothes, lay out a fur product on it.

Change the cloth from time to time and straighten the thing. After drying, hang the product on a rope or hanger and ventilate it outside. Comb the fur in the direction of the hairs.

January 31, 2014, 11:06

Most often, down jackets, winter jackets and coats have fur trim. As a rule, this is a collar, edging on the sleeves, ties with fur pom-poms, and so on. Fur on outerwear can be natural and artificial, removable or sewn to the product itself. If everything is more clear with natural fur, that is, it cannot be washed in any way, but only use the dry cleaning method, then a lot of things are not clear to us about caring for artificial fur. Therefore, people often ask how to wash faux fur from a down jacket and in general, is it possible to wash faux fur. In this article we will try to understand this, many questions of interest, how to wash faux fur.

Some nuances to consider

As a rule, the manufacturer provides for washing his clothes, therefore, most often in modern models, the fur collar is removable. That is, before washing, it can be easily unfastened from the hood. But there are also such things in which the collar hem or the edge on the sleeves is built into the product. Most often it is artificial fur. In fact, it, unlike natural, can be safely washed, both by hand and in a washing machine. But before doing this, you need to understand some of the nuances.

Tip: If your jacket has removable fur, it's best not to wash it. Minor dirt can be removed by dry cleaning. If it is detachable but you still want to machine wash it, place it in a mesh laundry bag.

Each product has its own label, on which the manufacturer gives instructions on what materials it is made of, as well as recommendations for care: washing, ironing and drying, using the required temperature.

IMPORTANT! The information on the label or label is extremely important. If you do not follow these instructions, you can easily damage your item.

Before washing, check the fur for strength. If it is poorly attached to the product or climbs and crumbles, it is better to wash such clothes with your hands or clean them “dry”.
Do not wash any other things with the jacket (down jacket). The pile of fur will definitely stick to other things, after which they will need serious cleaning.
Things with built-in faux fur should not be washed often, especially in a washing machine. Small dirt can be easily cleaned and washed with the appropriate detergent and sponge.
Before washing, it will not be superfluous to comb the fur on the jacket with a soft brush with a long pile. Thus, you will remove the excess pile that falls out, distribute the structure of the fur, which will prevent it from sticking and slipping during the washing process.
For washing products with artificial fur, it is not recommended to use ordinary washing powders. They are quite aggressive, besides, they are poorly rinsed out of voluminous things. Use special liquid products, gels or capsules. In extreme cases, you can use regular shampoo or dishwashing liquid.
As a rule, the delicate mode is set in the machine with a temperature not exceeding 35 - 40 ° C. Spinning at high speeds and the "Drying" program is better not to use.

IMPORTANT! Some things, especially those bought at the bazaar, may be of dubious quality. Often, faux fur can be brightly colored. Before washing, it is necessary to check how well the paint is fixed on it. Take a white washcloth and soak it in either hot soapy water or an alcohol solution (1 teaspoon water, 1 teaspoon alcohol). Wipe her fur and see if the paint is imprinted on the napkin. If there is such a problem, then the fur will shed during washing and it is better to wash such clothes with your hands.

We wash the fur by hand

Read the instructions on the label carefully. Stick to them strictly.
If only the fur is dirty, remove it from the down jacket (jacket, coat) and wash it separately. If the fur does not come unfastened, it can also be washed without completely soaking the entire product.
Prepare a warm soapy solution in a basin at a temperature of 35 - 40 ° C.
Soak the fur in the solution. Use a soft brush. It is strongly crushed, and even more so it is impossible to twist it.
After washing, rinse the fur, at least several times changing the water to clean. In the latter, add a small amount of table vinegar. The temperature of the water during rinsing should be cool, no more than 30 ° C, and preferably cold.
Do not twist the clean fur, slightly wring out the moisture with your hands and hang it over the bathtub so that the water drains on its own.
When all the main water has drained, the fur collar can be spread out on a terry towel in a well-ventilated place until it is completely dry. Spread and shake it periodically.

IMPORTANT! Do not dry fur on batteries, near heating appliances and in the open sun.

Finally dried faux fur must be combed with a comb with rare teeth. It should be scratched carefully and only in the direction of growth of the pile, that is, from the base to the edges.

We wash the machine in the machine

Washing faux fur in a washing machine is no different from hand washing.

If the fur is detachable from the product, it is better to wash it by hand or resort to dry cleaning. When washing in the machine, put it in a laundry bag.
It may be that the thing needs to be washed, but it has non-removable fur parts that I would not like to get wet. You can wrap them in a plastic bag and tie them tightly with threads.
Before washing, do not soak the fur.
Use only the delicate wash program. The water temperature must not exceed 40°C.
Do not use powder detergents, and even more so those that contain bleach, chlorine and alkali. Liquid gels and capsules work best.
If you are washing the entire garment, and not just one detachable collar, put a pair of clean tennis balls or special rubber balls with spikes for washing bulky items in the drum of the machine with the item. Thus, the insulation of clothes will not go astray.
Spin should be only at the lowest speed of the drum. We do not use the "Dry" function.
We do not unscrew the clean collar, slightly wring it out with our hands and hang it up for a short time so that the water is glassy. Next, dry the product according to the rules, as described earlier.

Dry cleaning

In places where parts of clothing are constantly in contact with the skin of the body, for example, the inside of the collar, the fur gets dirty especially quickly. When sweat and sebum get on it, it begins to shine, stick together and lose its attractive appearance. But this does not mean that it should be completely erased. You can dry clean faux fur.

Fat deposits and stains can be removed with refined gasoline and starch. Mix gasoline with starch to a thick consistency. Apply the resulting mass to dirty areas of the fur and soak for half an hour. Then comb the fur with a comb and a soft, long-bristle brush. In hard-to-reach places, you can use a toothbrush or even a vacuum cleaner. Remember to clean the nozzle of the vacuum cleaner before use.
Talcum powder or baby powder can be used as the main cleaner. Treat the fur with it, then shake it well. If desired, the procedure can be repeated several times. Talc is used as a sorbent that absorbs all surface contaminants. The rest of the powder can be vacuumed.

Of course, if the thing is worth a lot of money or you are just afraid of ruining it, take it to a dry cleaner. In any case, wash the fur only in extreme cases, give preference to dry cleaning methods and then the thing will last you much longer, and the fur will always delight you with its attractive appearance.

Faux fur is washed independently at home. This is one of his virtues. It is impossible to give universal recommendations for cleaning, because the synthetic fiber from which the fur is made has a different length and structure. The composition of the fibers is also different, and the use of the same product for different types of fur is unacceptable.

Pretreatment of fur before washing

Before proceeding directly to washing the fur product, it is necessary to remove local dirt, dried and hard-to-remove stains.

Types of pollution:

Yellow spots on white fur. The disadvantage of light-colored fur is its tendency to become covered with a yellow coating and lose its snow-whiteness. If local spots are visible that clearly stand out against the general background, then before washing, the artificial fur should be wiped with a cotton pad with a solution of hydrogen peroxide in the ratio of 1 tablespoon of liquid peroxide per liter of water. Try to walk only on the surface itself so that the solution does not go deep inside.
Strong pollution of unknown origin. It can be dried chewing gum, stains from oil perfumes. From refined gasoline (sold in household goods) and starch, gruel is made. You need very few ingredients, a spoonful of one, a spoonful of the second. The mass is applied to the pollution, rubbed a little, and the fur is left to dry. It is better to do this on the balcony so that the smell of gasoline does not bother anyone. Then the fur is shaken off, and the gruel is knocked out of the fur.
Rough fur on the cuffs. The fur on the folds (cuffs, collars) quickly wears out, rubs and becomes dense and hard. The situation will be corrected by a 2-phase treatment with a salt solution and an oil emulsion. At the 1st stage, dilute 2 tablespoons of table salt in a liter of water. Apply the solution to the coarsened fur and rub it with your hands, moving in different directions. The procedure is repeated several times, after which the fur is wiped with an oil solution (100 grams of castor oil + 20 drops of ammonia and a liter of water). The place of application is covered with cling film for 2-3 hours, after which it is removed, and the fur is combed with a comb.
The fur was exposed to rain, was not well dried, and the pile lost its shape, began to curl and faded. In this case, treating the fur with an alcohol-free hair product with keratin will help. After the fur has been washed, it is dried, a hair product is applied and combed. Fur will become smooth and shiny.

You can wash fur in a washing machine if it has a thick and short pile. If the pile is long, mechanical washing will hopelessly ruin it. In addition, fur products cannot be dried in a centrifuge, otherwise it will be wrinkled and ragged.

Top-loading washing machines are better for washing furs. Half fill with water, pour in a liquid detergent for silk and delicate fabrics. After 20 minutes, turn on the "rinse" mode. Remove the fur after the machine stops working. Do not twist it, let the water drain itself. Lay out the fur on the ironing board. It is better to put it on the balcony and turn the product over until it dries completely. When it decreases in weight, you can hang it by the shoulders on a clothesline.

If you wash in a front-loading machine (round window), then you do not need to pre-soak. Select the "delicate soak" mode and wait 20 minutes, no more. Then dry the fur.

How to wash fur by hand

It is preferable to wash fur products by hand. To do this, fill the tub with warm (not hot) water and dissolve the liquid detergent. Even baby soap will do. The main thing is that it should be careful with delicate fabrics, because the pile has a porous, fragile structure.

Shake the fur a little with your hands, but not too actively. Leave on for 15-20 minutes. If left for half an hour or more, the fur will start to color. Be careful!

Remove the fur from the soapy water. Drain the water and pour clean cool water. Rinse the fur. Make 2-3 passes.

After rinsing, wrap the product in a terry towel and squeeze through it. Spread the fur in the bathroom on stools or a grate so that the water drains from it. Only after that take out the fur to dry on the balcony. You can comb it with a brush. To make the fur shine, treat the surface with hair shine products.

Wash faux fur in liquid detergent. It has a delicate effect on the fabric, enveloping the fiber, and can be used for silk or wool. Here are some good products for washing fur:

VESTAR Gel for washing. Carefully removes dirt, does not wash out the paint from the fur.
Liquid detergent FLAT. Protects the structure of the fiber, does not wash out the color.
Washing gel Alles Gut. Does not contain phosphates, does not spoil the fur.
Washing gel Dreft Delicates&Color. Keeps the shape and structure of the fur, protects the color from washing out.
Capsules for washing Ariel Active Gel Capsules. Delicate wash and excellent results.
Washing gel Frosch. Makes fur soft and shiny.
Washing gel Sodasan Cool. It has an organic origin, contains natural ingredients that care for the pile, like hair.
Washing gel Astonish. Does not contain chlorine and phosphates. The formula is similar to hair shampoo. The active components of the product were previously used in cosmetology. It will revive even the most “killed” fur.
Liquid gel Onyx Color. Has an antistatic effect. Retains the shape of the product. Protects the structure of the fiber and makes the color brighter.

Follow the rules when washing fur products. Do not forget that the fur should not be soaked for more than 25 minutes. Use liquid detergents. Do not twist the fur and do not hang it on a rope immediately after washing.