Our children 

What can be made of ribbons and cardboard. Flowers from ribbons with their own hands. Artificial flowers from ribbons

Tapes from satin love to use many craftswomen in their work. If you have not yet tried to make crafts from them, then it's time to start, and you will notice how easy it is, quickly and beautifully, you can make similar homemade.

Dignity

As photographs of crafts from ribbons show, such things have the following advantages:

  • Low cost.
  • Aesthetics.
  • Durability.
  • Relatively small consumption when working.
  • There is no need to use special tools and skills.
  • Excellent combination with another decor, be it beads, beads or rhinestones.
  • Easy process of manufacturing accessories.

Areas of use

It is customary to allocate several areas of using crafts from ribbons. Such beautiful things can be created with a child.

According to pediatricians, children who are engaged in needlework are characterized by a higher level of development and activity. This is due to the fact that, creating a certain craft, it is necessary to perform quite a few concomitant tasks.

It turns out that, looking to sew a child, you learn to make decisions yourself. In addition, needlework develops a small motorcy, as well as accuracy, patient, attentiveness and preferabity. Making accessories from tapes, children learn to handle with a needle, and this skill will be useful to them in later life.


Speaking of adults, ribbon fakes can be decorated not only by clothes, but also interiors for the holiday. It does not require significant cash costs, but there looks like things always original and stylish.

In addition, accessories from satin ribbons can serve as an excellent gift for loved ones and friends.

Types of tape creativity

Interior decorations made of ribbons attract their diversity and spectacular appearance. They may be simple or have a complex design. In other words, you can make some damprick from the tapes or create a real masterpiece. It all depends on the fantasy and skills of the master.

Consider what crafts can be made from the satin ribbon along with the child. Here is a small list:

  • jewelry for hairpins or brooches in the form of flowers or bows;
  • bracelets;
  • decorative elements for designing gifts or room.


There are more complex variants of crafts from ribbons. Ribbons are used to embroidery paintings. It is also made of sachets, festive attributes, decorative bouquets, design for Easter eggs and much more.

Techniques working with satin ribbons

After examining the ideas and instructions for making crafts with their own hands, we can conclude that there are several main techniques for working with ribbons:

Weaving. This method is suitable for making bracelet, suspension or blanks for embroidery. This method can even take advantage of an inexperienced person, since there are no special knowledge.

Sewing. Such a method requires the development of the simplest techniques of the needle with a thread. Most often in this case, ribbons are used in applications.

Creating things of varying degrees of complexity from various additional details. Thus, you can make small baskets with folding handles, boxes and caskets.

If you are just starting to make the first steps in the development of ribbon art, then you need to visit at least one master class on crafts from ribbons. They are organized by the experienced needlewomen.

They will be happy to share with you with their hectares and tell all about the specifics of working with ribbons. In addition, you can get the Board for the manufacture of a particular accessory.

Starting with simple forms, after some time you increase your skills and you will be able to give master classes beginners. Many popular designers began their way to profession from hand-made crafts.

Note!


Decorative things from satin ribbons are always unique. Through them, Skovorny passes their mood and vision of the world. This is an excellent way for any craftswoman show your level of skill and artistic taste.

Do not be afraid to fantasize, turn your creative potential to full, and your crafts will begin to admire everyone around.

Photo crafts from ribbons

Note!

Note!

Crafts from the ribbons are customary to decorate the interior and clothing. Manufacturing technology is improved by many centuries. Nowadays, such equipment such as Kanzashi and Quilling are popular. Creating tape flowers is an interesting lesson for girls and women. Some do it professionally, shoot video with master classes. Using the advice of experienced masters, you can create a small masterpiece for your room or a gift to a close person. With the help of needlework, you can not only pass the time, but also improve the appearance of the apartment, and also learn something new, to realize your ideas. All works are made in several stages. The first of them is the preparation and processing of the tape. The main part of the flower is then created. The next stage is the formation of the foundation and fixing the petals on it. After that, the finished composition is decorated.

Advantages and disadvantages of creating flowers from ribbons with their own hands

Benefits are much more. First, the creation of flowers from the ribbons helps to preserve the wildlife. Crafts look like real - this is the main plus. Creating flowers from ribbons is simple, and at the same time a low-cost way to decorate the interior. They are not covered and served as much as necessary. Ribbon flowers will be an excellent gift for the eighth of March or Valentine's Day. Products are drawn up in any tones - this is another advantage over alive plants. And adult women and young girls will be interested in experimenting with the form of flowers and the type of finished composition. The masters have the opportunity to use any decorations at their discretion, create interesting, not to similar forms. Products from ribbons have some disadvantages. Newbies need to spend a lot of time to make a bouquet of a large number of colors. The absence of one's own smell is also a disadvantage. Fresh flowers create a special atmosphere due to its fragrance, and artificial devoid of such qualities.

Solid tape rose

You can use a narrow semi-coattimeter ribbon, then the product will be small in height and with dense texture, a large amount of bends. But the optimal option provides for the use of a relatively wide 4-centimeter tape. At first, sticking string from it, and one of the edges is melted with a lighter. On the same side and the main part of the work begins. The end is twice as well, creating a diagonal fold. The corner is flexing down, and the process of twisting the core of roses begins around it. When the diagonal bend is almost not visible, you need to flip the ribbon over your feet. The rolled part is covered, after which the strip is once again turned over. Then you need to continue to "collect" the flower, repeating these actions after each full turnover. Closer to the end of the ribbon begins to form the lower part of the flower. The tail is covered and twisted. The product is fastening the thread.

You should not do too strong tension, otherwise the craft is not so lush.

The easiest way of manufacture is involved in the use of scissors, thread needles, nylon thread, kapron tissue. Rosette folds, starting from the core. The central part is formed by the bending of one of the ends of the tape and its winding the opposite, free edge. The resulting layers are pierced with a needle. The remaining free segment is winding around the center. With every turn, three fill is made out. Each of them will form a separate petal. To fix the product, the flower needs to be treated with thread. There is a more complex embodiment for which the sponge, acrylic paint, sintepon, oval or rounded shapes, will additionally need a sponge, oval or rounded shapes. Wire segments will be the foundations of individual petals. Molds are wrapped, and the fragments of the kapron tissue are stretched from above. They are attached thread. The center is made from painted syntheps. It will only be left to attach the stem.

Kanzashi (Kandzasi) is a kind of Japanese jewelry, mainly for women, as well as the name of the technology of their manufacture. Finished products usually consist of flowers and leaves, but there are other options related to plants. In total there are about 5-10 main subspecies of this technique, including Tsumami-Kandzasi, Biracan, Mimikati Kandzasi. Not all of them look like a typical modern canzashi. This method implies the use of a fire source to give the petals and the leaves of the characteristic form. Atlas applies as material for products, less often - similar to the fabric parameters. During the work, you will need such devices like scissors, a glue gun, gum, hairpins, stamens, pins, tweezers. Temperature effect is necessary for manipulations with the edges of the molds, as well as for their connection. Fragments of small length are cut out of the satin material, most often rectangles. Their angles are connected or trimmed (evenly or with rounding).

Simple flower five hundred

Since the product will consist only of a cup with petals, it is better to do a few pieces. Squares of 5 × 5 or 6 × 6 cm square are cut from the satin material. They are diagonally. Then the method of bending the corners from the triangle is made square. Then he repels once again into a triangle, and from the side with the largest amount of free edges, a strip of 2-3 mm wide is cut off. The treated side is captured by tweezers, and the workpiece is brought to the candle. Cropped face is float. Immediately after that it should be chopped. It is necessary to wait ten seconds and start to give the mold convex view. Then the foundation is done: a rubber band is installed on a round harvesting. It is necessary to make cuts and with the help of glue and another circle to consolidate it. Petals are attributed to the flat part of the design, also with the use of glue.

Flowers are best done in different colors:

  • orange;
  • pink;
  • yellow;
  • blue;
  • red.

Bell

In addition to the main component - satin ribbon, you will need:

  • candle;
  • wire;
  • stamens;
  • sewing devices;
  • suitable glue;
  • line;
  • glass;
  • egypt.

2.5 cm wide ribbon is cut into fragments of 5 cm each. Two pieces are applied to each other with the invalid side. Next they are put on the glass. Using the ruler, the diagonal line is highlighted. All fragments are cut with a hot knife. After that they are soldered along the cut line. The short edges are first stitched by a thread separately, and then join each other. After that, the facial side of the acute part of the connected petals is melted with a candle. It is impossible to allow deformation on temperature effects. Next, the end is quickly twisted, so that the bending is turned out. It is necessary to make five such items to create one flower. Then you need to work with stamens: they bend twice as well, tighten the wire and twisted. The top of the stamens are lubricated by glue and five petals are attached to them.

Aster

You will need: thread with needle, several beads, lighter, scissors, green mesh, satin ribbon, thick cardboard, adhesive gun. It is not necessary to choose natural tones to create a flower, any bright shades are suitable. The first thing the tape is cut into a large number of segments: from thirty and more. Its width should be 2.5-3 cm, the length of the fragments is 6-7 cm. Each cut is twice in the narrow strip. Then the scissors are cut off a small fragment from one end. It is necessary to do it at an angle of 45 °. The cut edge is melted with a lighter and gluits. Two opposite angle bend inside and melted with fire. And so 30 petals. Then a small circle is cut out of the cardboard. It is covered with satin material. Two rows of petals are glued to this basis. Some add diversity and create another series in the middle, in another color. The finished composition is decorated with beads.

Pion

We will need: base for brooches, ribbon, large bead, needle, bead or monofilament, scissors, tweezers, candle, matches. Circles of different sizes are cut out of the tape. The magnitude of the final product depends on their quantity. All items melted with candles with fire. You need to achieve a wave-like outline over the entire perimeter of the future petal. After that, they are formed near. For this, a small cut is made to approximately 1/5 of the circle was a straight line. The next step is to cross-link several petals in the group. Mugs are combined in a sequence from a large to less. Next, with the help of the thread, the central part of the flower is created: a large bead is attached to the base under the brooch. After that, petals join the product. Now it can be used as a brooch or hairpin or make a gum.

Hibiscus

Read:

  1. Scissors;
  2. Candle;
  3. Super glue;
  4. Template with a side of 6 cm;
  5. Thin floristic wire and two satin ribbons of different colors - one will imitate the flower (it is better to choose a pink), and the other stem.

You will also need stamens under the color of the pink ribbon. The first thing from the green ribbon is cut with a 6-centimeter rectangle. On the one hand, he needs to give the form of a leaflet: two corners are cut with scissors. Enough one such element. From the pink you need to make five petals. Using the template, the desired number of pieces is measured and cut off. Fragments are cut out molds resembling a drop. One of the edges at the same time is rounded. The perfect form is difficult to cut, so you need to fold all the segments together or use another template in the form of the right petal. Next, the smooth side of the leaflet is melted. The petals are processed by fire throughout the perimeter, the rounded part is still stretched by hand. Then all fragments are collected together and attached. The stem is made up with green ribbon. It is fastened for a leaf of the same color - the product is ready.

Flower of braid-waves and zigzag braids

Very original products are created from the wavy braid. Need a needle with thread, scissors, one tape-wave 50 cm long or two to 30 cm (preferable). First of all, two segments are intertwined with each other, like curls in the spit. This workpiece is shifted on the typewriter. Then the bud is made: the braid is folded and fastened with glue in several places, it is desirable to once for each turn. The end is converted and also fixed with glue. In this form, the product will mimic the peony, and if you turn the petals - it will be reminded to a rose. Very original non-standard product will be from Zigzag Tales. We need a segment with 20 bends. The ends of the fragment are stitched. For this, the allowance is left in advance. Then, with the help of the thread, you need to flash 10 elements (after one). Then this ring is going to the compact circle and fixes. Then it is plane, and eventually all petals will be directed or counterclockwise.

You will need a mount (rubber band, hoop or hairpin), thread under the color of the lace, the circle of the fleece of the same color, 2 meters of lace. First of all, the material and fastening is prepared. Then the lace is stitched with a double thread with a decorative edge with a double thread. Seam "Forward needles" is used. Thread stretches and the lace canvas is tightened. Folds are distributed evenly along the entire length of the tape. No need to divide the needle and thread. They are fixed for some time for the end of the lace. Next, you will need a second needle with thread: it is sewn to the fleece circle on the helix. It is necessary to trace the lace "watched" face up. The core of the flower is decorated with their taste: buttons or beads. From the remaining lace tissue, you can make a mini-bud and sew it to the central part of the product. The first thread is now fixed and cut off - the work is completed. It is worth noting the appearance of the products separately. Very original looks of flowers from thick lace ribbon with decorations with diverse stones.

Many remember them since childhood: birthdays, New Year and St. Nicholas Holiday rarely, when they were without these decorations. They are made simply. On a paper sheet, 9 strips are drawn 1.5 cm wide. They are cut, and then decrease to the desired dimensions. It is necessary 3 pieces with a length of 25 cm and as much by 22 cm, two to 19 cm and one strip is 9 cm long. The shortest bends into the ring and fixed by the stapler. All other twists the "eight" and are also fixed. Fragments add up to each other. Inside the bud there will be small "eights". In the very center put a ring. Pieces of bilateral adhesive can be used in both the start of creation of the bud for creating adhesive surfaces on fragments and after, for reliable fastening. The paper itself can be different: just colored or decorative with different stripes.

To create such a product personally, you will need to use:

  • paper;
  • scissors;
  • line;
  • pencil;
  • stapler;
  • double-sided tape.

There will be eight ribbons, four blue and as much purple. Each length should be 15 cm, and the width is 0.6 cm. First, the purple strip is twice as well, and the top of the folded end is lubricated with glue and is attached to a soft round base, smoothly in the center. The rest of the purple ribbons are then glued. This is done in such a way that between the ends of all strips was the same distance. After that, 8 drops of glue are applied to the central parts of these "rays". The end of one sticking strip is attached to the center of neighboring and so throughout the circle. It is necessary to do this part of the job very slowly, otherwise the petals will turn out to be unequal. Next you need to do blue stripes. They are attached on top of purple, and then their edges are carried out through the loops. Then the blue ends are tightened in the same way as purple.

Packing tape for the manufacture of colors

To create a craft, you will need a needle, moulin, tailor pins, a round metal pattern with sticking knitting needles and the packaging tape itself (you can choose a simple transparent). Initially, the template is taken, and the ribbon is gradually wounds. Stitches need to be applied to the opposite edge on the needle. When the tape is wound completely, the center is allocated. To do this, connect the petals in the middle with the needle with a thread. Center snapshots in a circle. The free edge of the tape is cut under the central part. Petal is removed from the needles - it remains only to make a flower. Ditcher should decorate with decorative elements. You can paint it from the canister. The monotonous color will look best, but it is worth trying to use different molds and paint the flower original, for example "in polka dot". There are also many color packaging tapes - ordinary and festive.

It is worth trying to make a complex craft using ribbons of different widths and thickness and with different interlacing.

Flower from the reps tape

Such products can be found in children's clothing: sundresses, dresses. Create a craft from the reps tape will be easy and newcomer. You will need a thread, scissors, pencil, adhesive gun, candle, reps tape. First cut 5 strips of the same length (approximately 5-6 cm). The edges are processed over fire. Then the fragments give the shape of a bow, gluing opposite edges in the middle. All bows are folded in half. After that, they are flashing the thread with a flat side and are going to the circle of five petals. Created by them bud bonds and decorated with a button. Petals attached volume. There are even simpler techniques. The tape can be imposed several times, creating thickening in the center. Then you need to make all the threads, and decorate the product with a button. Another interesting way is to create petals from several turns of different sizes.

From this material are created both small flowers and large, diameter greater than half a meter. The latter are created from the Foamiran (Izolon) - polypropylene fiber. You will need large round sheets with a density of 30, paint, adhesive gun, hairdryer. Billets can be cut independently from a large canvas. Thanks to the power of the material it will be easy. First, two rounded petals with a long side of about 30 cm are cut out. Of these, the core will be made. All other fragments should be more: 35, 40, 45 cm, etc. The lower parts of all elements are cut out noticeably narrower. In the process of work, these segments are covered from the gun and bend. If the bottom of the bottom is twisted and fixed and fixed, then the following is enveloped around the already created design. The desired shape is given and after each change, it is fixed with a hair dryer. When all petals are ready, you will need to make the core from the coil for threads. Then the flower is painted.

It is necessary that the air from the hair dryer is as hot as possible, otherwise the flower can start quickly lose the form or fail at all.

Application of finished flowers

Such crafts decorate ordinary and festive hairstyles. For this, the flowers are fixed on elastic bands, rims, hairpins and are made up by beads, brooches, various small elements. Ribbon flowers with pins decorate the objects of the wardrobe. They are decorated with lapels; Purchase in pockets, attach to the hats. Flowers made of ribbon will become bright gifts for various occasions - for birthday, new year, religious holidays, angel day. These crafts are drawn up various homemade compositions, topiaries, gift boxes. The rooms are decorated with manual work - a great place to decorate with bouquets and photo frames with flowers from ribbons. You can also separate the flooring and tulle. Recently, the boutonnieres and bouquets-dubers from satin material have become popular. They are bought not only for solemn events.

Conclusion

Flowers from tapes are sometimes difficult to distinguish from living. A beautiful composition can be created from a simple paper or lace ribbon, or in the technique of canzashi from satin. Ribbon flowers are mainly intended for hair decoration - they can be given to women and girls. To create a flower, you need to go through a few simple stages. First, ribbons are prepared for processing. From them, unnecessary threads are taken, uneven edges are cut. Next, the process of twisting or flashing begins. This is done in different ways, depending on the execution technique. The resulting form is usually sealed with threads, glue or wire. Flowers are decorated with brooches, beads or remain intact to mimic real colors. Color is selected at the discretion of the wizard. As a result, it turns out a "self-sufficient" decoration that can be used and as an element of decor.

Suddenly, you wanted to start doing something exciting, but do not know what? There are many kinds of different crafts: beads, paper, plasticine and fabric.

But why not pay attention to such material as a ribbon? They have many advantages, such as low cost and accessibility.

Agree that this will not be especially difficulty and the cost of materials for this kind of hobby and besides, it is a great gift for any celebration. No doubt, in our article you will find many ideas of crafts from the tape that you can easily implement.


Advantages and pleasant "bonuses" in working with ribbons

Recently, active attention and demand cause crafts from ribbons. And it is not surprising, because this type of creativity does not cause special difficulties in the fulfillment and choice of material. Ribbons are sold at any accessories and sewing accessories and a penny.

If you are active mommy and love to do something new with your child, then this is a lesson for you. Having made at least one craft, you give your children invaluable experience in working with a thread and needle, help in the development of fine motility and imagination.

In addition, it can be improved its old clothes, accessories and elements of life. Below are the photo examples of crafts from ribbons, which were made in conjunction with children.

What do you need?

Everything is very simple, because all you need - needles, threads and ribbons of any colors and widths. If you want to create a picture, then you will need to purchase a sufficiently strong fabric, which without much effort will skip the needle with a ribbon.

For this, several types of fabrics are suitable: KANVA (used in embroidery) on which there is already a drawing, for those who are just starting, or without a picture. You can also use ready-made accessories or clothes elements (case, pillow, glove, rubber band, dress).


In the world, the tapes you provide a huge selection of colors and materials of fabric, such as satin, corrugated and silk. It is precisely satin ribbons that are often attracted by their glitter and durability of high-quality and durable work.

To select the needle, you should guide the width of the Ear, preferably, when buying a needle, take the ribbons with you that you will use in work and check whether you will work with them.

Note that in this form of work you will not need an ideal sharp needle, it is better to use a needle with a blunt end, as it will not tear the thread of your basic fabric. For fixing the edge of the ribbon usually use a conventional lighter.

Thus, to make a craft from ribbons with your own hands you will not need a lot of time and money costs, and instead you will get an original hand-made interior decoration or a gift close.

From Azov to perfection

A variety of tape mastery techniques varies from a simple, which even children can do to more complex. First you need to understand the easy version of crafts from tapes, such as decoration of the hairpins with various bows and flowers, weaving bracelets, decorating the elements of the wardrobe and life.


Artificial flowers from ribbons

The most popular option is the manufacture of various colors for the decor and gifts. Let's start with more simple equipment with a detailed description for beginners:

  • Take the satin ribbon of the desired color and fold it in the "Harmonic"
  • Cut the detail in the form of flower petal
  • Do the same as in paragraph 1, only with another color of the tape that will play the role of the leaves in your craft
  • Cut the detail in the form of a sheet
  • Albeit edges of details and glue separately petals in the form of a flower and leaves
  • Optionally, decorate rhinestones and sequins

Attention! Do not leave children unattended with flammable items.

So, we have mastered the simplest technique of manufacturing a flower from the tapes and now you can start up more complex manipulations using folds, glue and lighters.

For the manufacture of roses, we will need: satin ribbon of any color 5 cm wide and about 90 cm long, lighter, tweezers, scissors, glue.

Stages of work

  • Cut the segments of a thickness of 5 cm and a length of 11 cm, which we should get 8 pieces
  • We take a segment and turn to yourself the involving side, then bend the top edge by 0.5 cm
  • Watch the center of the right top corner
  • Then the lower right corner, we also wrap in the center, and at an angle of 45 degrees, cut a part of the bottom corner (for convenience there are tweezers). The resulting edge I burn a lighter
  • I repeat the same with the left and fasten the lighter
  • As a result, we get 8 petals

Buiton assembly

  • We take glue and drip on the edge of a petal 1 drop (it is desirable to use "glue-moment" or a glue gun), then we turn the petal in a circle, forming a bud
  • Fix glue from the second edge of the petal
  • We take the next petal and dripped on the edge of the glue, we already take a ready-made bud and start to buy it with a petal, from the other edge it is reinforced by glue.
  • Thus, we form a rose flower, doing the same with the rest of the petals. Do not be afraid to use the fantasy and move away from the rules, because it is your creativity.

Popular technique Kanzashi

We gradually acquire experience in working with ribbons and approach more complex techniques. I think you have noticed a beautiful photo with bouquets of artificial flowers on the Internet, beautiful hairstyles with unusual hairpins and accessories - all this handmade performed ribbons in Kanzashi technique.

For this work, billets are used in the form of squares, cut and burnt over the edges. Of them make petals that are with sharp and round edges and then form flower from them with a thick thread.


Next glue the flowers to the base from the cardboard or dense tissue. These flowers can be transferred to any accessory (hat, cover, bag, shoes) or make a beautiful panel on the wall. For the addition, many are attached to rhinestones or sequins.

You can deal with the manufacturer's technique in more detail, looking at the video with a master class from real needlewomen.

Photo crafts from ribbons

Ribbons from satin soft and militant, they are easy to give a shape, and for the processing of the edge, it is enough to burn over the fire, so they are well suited for creativity. The manufacture of crafts will not take much time and labor, although they look complicated and incomprehensible. Each needlewoman should once try to create a simple flower from this material.

Satin ribbons Universal material used for making crafts in various techniques. They are inexpensive, and consumption is quite small. A detailed description of the crafts from the satin ribbon for beginners will allow to start creativity.

Panel from satin ribbons

Ribbons for the manufacture of the following products are suitable:

  • flowers, bows, snowflakes;
  • volumented animals;
  • pictures and panels;
  • new Year's Christmas trees and Topiaria.

Flower headband

And also decorated:

  • clothes, shoes and hats;
  • wedding attributes (glasses, champagne bottles, bridal bouquet);
  • premises;
  • easter eggs and New Year's balls.

Reference! In order to decorate a gift box or a bouquet, you do not need any additional tools. Enough satin ribbons and a little labor.

Necessary materials

For the manufacture of each craft, materials are selected individually. Depending on the size of the desired colors and destination.

But there is materials and tools that will be needed anyway:

  • ribbons of various shades and width;
  • scissors, pencil, line;
  • needle, threads;
  • lighter or candle.

Important! For the manufacture of crafts from satin ribbons, you can use a special soldering iron, which simultaneously cuts the fabric, and places the edge.

Different techniques

Crafts are made by various methods. They are easy to understand even a novice, although products often look luxuriously, naturally and difficult.

Kanzashi

Japanese appliances manufacturing decor, rods and hairpins from tapes - Kanzashi. Modern masters create not only hairstyles for this technology, but also many other crafts. Collect them from individual petals that are folded by origami. At the heart of Kanzashi, two principles for creating petals: round and sharp. The rest is the fantasy of the needlewoman (photo).

Additionally, you will need glue and beads, rhinestones, sequins. Satin ribbons are pre-cut into squares.

Making round petals:

  1. Square to turn into an equilateral triangle.
  2. Corners from the fold are tested to the bottom corner so that the round line turns out from above.
  3. Side angles fold from behind. Align the edges.
  4. Albeit cut and press for fixing.

In the finished product:


Production of sharp petals:

  1. Stop the square as well as in the first version.
  2. Connect two angle, while fold from above.
  3. Collapse petals once again in half.
  4. Albeit and fix the angle.
  5. Control the bottom edge and melted the cut above the candle.

More often in this technique, flowers and snowflakes for hairpins, studs, rims and rubberry are performed.

Butterflies and flowers cannzashi will become an excellent decoration of clothes in the form of brooches, and the volume swans, peacocks and Christmas trees - interior decor.


Melted petals

This technique is good for creating roses, peonies and poppies. Flowers look natural, but not so gently like Kanzashi. Only synthetic tapes are suitable for work. Correctly choose the material only by trying.

Additionally prepare tweezers with long tips, cores or beads. To create flowers from melted petals need:

  • On paper draw petals. If this is a circle or a flower shape, then each part is less than the previous 0.5 cm, at least 10. If a drop or heart, then make 3-4 sizes at least 6 pieces.
  • Cut billets from the tape.
  • Petals melt over the candle, keep them with a better tweezers and a short distance from the fire.
  • Petals in the form of a circle and flower are connected in the center, and the drop and the heart are going downstairs. Then attach the core.

Crafts with melted petals are suitable for creating large flower compositions. And also to decorate brooch or hats, but you should carefully select the style of clothing for such accessories.

Embroidery satin ribbons

Any embroidery is popular at all times, and if you add tapes - the picture seems to come to life. The creative process is complicated, and requires a special amplification and accuracy from the master. To work it will take fabric bases and a special needle with a big ear.


Before you get started to explore the basic stitches of the technicians:

Direct stitch. It is performed by the type of visionary seam. Used to create petals.

Direct stitch

French knot. It is suitable for the image of buds. The needle is removed on the front side and wind up with a ribbon, then make a puncture next to the previous one and return the needle inside out.

French nodes

Twisted stitch. On the face of the tape stretch and twist, so that there are smooth turns. The needle is sticking at the desired distance and remove on the wrong side, they fill the tape with threads.

Twisted stitch

Japanese seam. The ribbon on the face is laying out and stick to the needle in her own way to an involnenial side. Thus create leaves.

Japanese stitch

Knowing these stitches, you can easily learn to perform the derivatives of the seams.

Embroidery satin ribbons

Embroidery volume rose

Stages of work:

  • The fabric outlines the location and size of the flower. From the center drawn 5 rays at an equal distance. Thick threads are paved in these rays. And then through them stretch the ribbon in a checker order.
  • The cut of the tape is seamlessly, and the spiral is tightened to form a bud, sewn threads.
  • The most naturally looks like a rose embroidered by Japanese stitches. Start work from the core with small stitches, then they are increased and placed in the form of petals.

Ribbons embroider paintings and panels, and also use for decoration of clothing, bags, pillows.

Important! It is better to use a thick, stupid needle. So the hole will be quite large for the tape and it does not break the thread of materials.

Other options

There are still many different types of "tape creativity."

For example, the bride's bouquet Can be made of twisted roses. To do this, you will need a tape 4-5 cm, with a length of 1.2 m. On the one hand, the corner is bent and twisted into the tube. Until the end of the length, the core is wrapped with a ribbon, twisting it, at small intervals, inside out and back. The second edge is hiding under the last petal, and fix the design by flashing thread.

Bridal bouquet of twisted roses with beads

In the artichoke technique It turns out wonderful new Year's toys. To do this, you will need the basis of foam, satin ribbons of three colors width 5 cm. They are cut into squares and start in half. One square to attach to the base. Align the center of the rectangle with the square of the square, wrap the corners and secure. Further, in the same vein, pinch the remaining details. Top ball decorate a bow.

Tip! For fastening parts in this type of patchwork, it is customary to use pins with a flat hat.

Technique Artichok: New Year's toys

The manifold of shades and sizes of ribbons allows you to make each craft unique. And by taking experience, needlewomen begin to experiment, coming up with new ways of making petals. Therefore, every day more and more beautiful and interesting works appear in various techniques.

You will need

  • For butterflies, hairpins:
  • - beads of different magnitudes;
  • - Wire;
  • - Accessories for sewing;
  • - Repex (satin) ribbon 0.5 cm wide;
  • For souvenir "Slippers":
  • - Cardboard thin (A4);
  • - satin tape;
  • - thread;
  • - needle;
  • - glue "moment";
  • For roses:
  • - Wide satin ribbon (red, pink, white);
  • - narrow satin ribbon (green);
  • - rose leaves (artificial);
  • - Thin white wire;
  • - Green wire;

Instruction

Beautiful and tender barn butterfly. Perform markup on the ribbon. Slip points through the intervals indicated in the following order: 7 cm, 4.5 cm, 7.5 cm, 5.5 cm, 6.5 cm, 3.5 cm, 5.5 cm, 5 cm, 5 cm, 5 , 5 cm, 3.5 cm, 6.5 cm, 5.5 cm, 7.5 cm, 4.5 cm, 7 cm. Start with 7 cm, making a mark, and finish with a segment of 7 cm. Collect the ribbon with The help of the thread with the needle of the harmonica, inserting the needle into the outlined points and stretching the binder thread.

The tape should be placed on various sides of the needle. Subsequently, when the whole ribbon gather, pull the thread and secure the knot. Carefully blank Expand around the circumference so that it is located on the spiral line. Form the shape of the butterfly wings, fixing the thread so that they do not crumble.

Make a torso with a mustache, having prepared 2 small beads (for mustache) and 3 large (for the body). Turn the wire to the bead and twist the two end of the wire, about 1 cm. After add the second bead and again turn the wire in 1 cm.

In the remaining 2 end of the wire, suck one big bead, after which dividing the ends of the wire, put on one of them already 2 big beads. Attach the housing to the butterfly and secure the wire below. Enclose crocodile clasp.

Souvenir "Slippers". Make the side and top of the slippers on the A4 sheet. Prepare strips, cutting the tape according to the size of the pattern.

The band should wrap the item from two sides. The pattern of weaving is a simple braid-chess. Start weave with 3 bands, gradually alternating vertical and horizontal tapes.

Having finished taking the top of the slippers, flush the sole, fixing the edge with glue. Collect slippers, sewing the details together. Reduce the top of the ribbon, selected on the thread.

Next, the suite tape strings and flower-rose. Such a souvenir can be used as a gift or to adjust instead of a needle, inserting the foam rubber or syntheps, and then reagreeing with a cloth or ribbon.

Volumetric rosette from satin ribbon. Measure the sections of a wide pink ribbon 8 cm long and cut its edges at an angle, which cuts off to 1 cm from each opposite angle. Then hent one edge of the tape down perpendicularly. Then located horizontally cut ribbons to lower the book by starting and applying parallel to the sheer part of the element.